home-assistant.io/source/_integrations/android_ip_webcam.markdown

title, description, logo, ha_category, ha_release, ha_iot_class

title	description	logo	ha_category	ha_release	ha_iot_class
Android IP Webcam	Connect Android devices as an IP webcam to Home Assistant	android_ip_webcam.png	Hub Binary Sensor Camera Sensor Switch	0.40	Local Polling

The android_ip_webcam integration turns any Android phone or tablet into a network camera with multiple viewing options.

It's setup as an MJPEG camera and all settings as switches inside of Home Assistant. You can also expose the sensors. If you have multiple phones, you can use all options inside a list.

There is currently support for the following device types within Home Assistant:

• Binary Sensor
• Camera
• Sensor
• Switch

Setup

Download the IP Webcam app and launch the app. When you press 'Start Server', it will start streaming video from your phone and the IP address of the device will be shown on screen.

Configuration

To set up the component, add the following information to your configuration.yaml file:

# Example configuration.yaml entry
android_ip_webcam:
  - host: 192.168.1.10

{% configuration %} host: description: The IP address of the phone on the network. required: true type: string port: description: The port the IP Webcam listens on. required: false default: 8080 type: integer name: description: Override the name of the phone. required: false default: IP Webcam type: string username: description: The username to access the phone. required: inclusive type: string password: description: The password to access the phone. required: inclusive type: string scan_interval: description: Defines the update interval of the phone. required: false default: 10 type: integer sensors: description: Conditions to display sensor in the frontend. See the list of supported sensors. required: false type: list keys: audio_connections: description: The audio connections battery_level: description: The battery level battery_temp: description: The battery temperature battery_voltage: description: The battery voltage light: description: The light level motion: description: Motion detection pressure: description: The current pressure proximity: description: The proximity sound: description: The sound detection video_connections: description: The video connections switches: description: Conditions to display settings in the frontend. See the list of supported switches. required: false type: list keys: exposure_lock: description: Control the exposure lock ffc: description: Control the front-facing camera. focus: description: Control the focus. gps_active: description: Control the GPS. night_vision: description: Control the night vision. overlay: description: Control the overlay. torch: description: Control the torch. whitebalance_lock: description: Control the white balance lock. video_recording: description: Control the video recording. motion_sensor: description: Activate motion sensor if auto_discovery is disabled. required: false type: boolean default: false {% endconfiguration %}

You need to enable logging in the Android app (Data logging > Enable data logging), if you wish to see the sensor states in Home Assistant. The sensor states stays as unknown, until it's enabled.

Full example

# Example configuration.yaml entry
android_ip_webcam:
  - host: 192.168.1.202
    port: 8000
    sensors:
      - audio_connections
      - battery_level
      - battery_temp
      - battery_voltage
      - light
      - motion
      - pressure
      - proximity
      - sound
      - video_connections
    switches:
      - exposure_lock
      - ffc
      - focus
      - gps_active
      - night_vision
      - overlay
      - torch
      - whitebalance_lock
      - video_recording
  - host: 192.168.1.203
    port: 8000
    sensors:
      - light
    switches:
      - torch

Binary Sensor

The android_ip_webcam binary sensor platform lets you observe the motion state of Android IP webcam sensors through Home Assistant. Devices will be configured automatically.

Examples

You can also setup the binary motion sensor with the following script:

{% raw %}

binary_sensor:
  - platform: rest
    name: Kitchen Motion
    sensor_class: motion
    resource: http://IP:8080/sensors.json?sense=motion_active
    value_template: '{{ value_json.motion_active.data[0][1][0] | round(0) }}'

{% endraw %}

Camera

The android_ip_webcam integration adds a camera by default if you choose not to use the integration but still want to see the video feed then the mjpeg camera platform can be used.

Configuration

To enable only the camera in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
camera:
  - platform: mjpeg
    mjpeg_url: http://IP_ADDRESS:8080/video

Sensor

The android_ip_webcam sensor platform lets you observe states of Android IP webcam sensors through Home Assistant. Devices will be configured automatically.

You can setup your own sensors by examining the JSON file from the webcam server: http://IP:8080/sensors.json