home-assistant.io/source/_integrations/sensor.rflink.markdown

title	description	logo	ha_category	ha_iot_class	ha_release	ha_domain
RFLink Sensor	Instructions on how to integrate RFLink sensors into Home Assistant.	rflink.png	Sensor	Local Push	0.38	rflink

The rflink integration supports devices that use RFLink gateway firmware, for example the Nodo RFLink Gateway. RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver).

Configuration

First, you have to set up your RFLink hub.

After configuring the RFLink hub, sensors will be automatically discovered and added.

RFLink sensor ID's are composed of: protocol, id and type (optional). For example: alectov1_0334_temp. Some sensors emit multiple types of data. Each will be created as its own.

Once the ID of a sensor is known, it can be used to configure the sensor in Home Assistant, for example to add it to a different group or configure a nice name.

Configuring a device as a sensor:

# Example configuration.yaml entry
sensor:
  - platform: rflink
    devices:
      alectov1_0334_temp: {}

{% configuration %} automatic_add: description: Automatically add new/unconfigured devices to Home Assistant if detected. required: false default: true type: boolean devices: description: A list of sensors. required: false type: list keys: rflink_ids: description: RFLink ID of the device required: true type: map keys: name: description: Name for the device. required: false default: RFLink ID type: string sensor_type: description: Override automatically detected type of sensor. For list of values see below. required: true type: string unit_of_measurement: description: Override automatically detected unit of sensor. required: false type: string aliases: description: "Alternative RFLink ID's this device is known by." required: false type: [list, string] {% endconfiguration %}

Sensor types

Sensor type values:

• average_windspeed
• barometric_pressure
• battery
• weather_forecast
• doorbell_melody
• command
• co2_air_quality
• current_phase_1
• current_phase_2
• current_phase_3
• distance
• firmware
• humidity_status
• humidity
• hardware
• kilowatt
• light_intensity
• meter_value
• total_rain
• rain_rate
• revision
• noise_level
• temperature
• uv_intensity
• version
• voltage
• watt
• windchill
• winddirection
• windgusts
• windspeed
• windtemp

Hiding/ignoring sensors

Sensors are added automatically when the RFLink gateway intercepts a wireless command in the ether. To prevent cluttering the frontend use any of these methods:

• Disable automatically adding of unconfigured new sensors (set automatic_add to false).
• Ignore devices on a platform level

Device support

See device support

Additional configuration examples

Multiple sensors with automatic_add disabled and aliases

# Example configuration.yaml entry
sensor:
  - platform: rflink
    automatic_add: false
    devices:
      oregontemp_0d93_temp:
        sensor_type: temperature
      oregontemp_0d93_bat:
        sensor_type: battery
      tunex_c001_temp:
        sensor_type: temperature
        aliases:
          - xiron_4001_temp
      tunex_c001_hum:
        sensor_type: humidity
        aliases:
          - xiron_4001_hum
      tunex_c001_bat:
        sensor_type: battery
        aliases:
          - xiron_4001_bat