2.4 KiB
layout, title, description, date, sidebar, comments, sharing, footer, ha_category, ha_release
| layout | title | description | date | sidebar | comments | sharing | footer | ha_category | ha_release |
|---|---|---|---|---|---|---|---|---|---|
| page | RFXtrx Rollershutter | Instructions how to integrate RFXtrx roller shutters into Home Assistant. | 2016-06-02 22:10 | true | false | true | true | Rollershutter | 0.21 |
The rfxtrx platform supports Siemens/LightwaveRF and RFY roller shutters that communicate in the frequency range of 433.92 MHz.
First you have to set up your rfxtrx hub.
{% linkable_title Configuration %}
#####Siemens/LightwaveRF
The easiest way to find your roller shutters is to add this to your configuration.yaml:
rollershutter:
platform: rfxtrx
automatic_add: True
Launch your homeassistant and go the website. Push your remote and your device should be added.
Once added it will show an id (e.g 0b11000102ef9f210010f70) and you can verify that it works from the frontend.
Then you should update your configuration to:
rollershutter:
platform: rfxtrx
devices:
0b11000102ef9f210010f70:
name: device_name
#####RFY
The RFXtrx433e is required for RFY support, however it does not support receive for the RFY protocol - as such devices cannot be automatically added. Instead, configure the device in the rfxmngr tool. Make a note of the assigned ID and Unit Code and then add a device to the configuration with the following id 071a0000[id][unit_code]. Eg, if the id was a (0a) 00 01, and the unit code was 1 (01) then the fully qualified id would be 071a00000a000101.
#####Common Example configuration:
# Example configuration.yaml entry
rollershutter:
platform: rfxtrx
automatic_add: False
signal_repetitions: 2
devices:
0b1100ce3213c7f210010f70: # Siemens/LightwaveRF
name: Bedroom Shutter
070a00000a000101: # RFY
name: Bathroom Shutter
Configuration variables:
- devices (Required): A list of devices with their name to use in the frontend.
- automatic_add (Optional): To enable the automatic addition of new roller shutters (Siemens/LightwaveRF only).
- signal_repetitions Optional: Because the rxftrx device sends its actions via radio and from most receivers it's impossible to know if the signal was received or not. Therefore you can configure the roller shutter to try to send each signal repeatedly.
- fire_event Optional: Fires an event even if the state is the same as before. Can be used for automations.