home-assistant.io/source/_integrations/light.rflink.markdown

title, description, ha_category, ha_iot_class, ha_release, ha_domain

title	description	ha_category	ha_iot_class	ha_release	ha_domain
RFLink Light	Instructions on how to integrate RFLink lights into Home Assistant.	Light	Assumed State	0.38	rflink

The rflink integration supports devices that use RFLink gateway firmware, for example the Nodo RFLink Gateway. RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver).

First, you have to set up your RFLink hub.

After configuring the RFLink hub, lights will be automatically discovered and added.

RFLink binary_sensor/switch/light ID's are composed of: protocol, id, switch/channel. For example: newkaku_0000c6c2_1.

Once the ID of a light is known, it can be used to configure the light in HA, for example to add it to a different group or configure a nice name.

Configuring devices as a light:

# Example configuration.yaml entry
light:
  - platform: rflink
    devices:
      NewKaku_02a48800_0: {}
      newkaku_0000c6c2_1: {}
      Ansluta_ce30_0: {}
      Maclean_0d82_01: {}

{% configuration %} device_defaults: description: The defaults for the devices. required: false type: map keys: fire_event: description: Set default fire_event for RFLink switch devices (see below). required: false default: False type: boolean signal_repetitions: description: Set default signal_repetitions for RFLink switch devices (see below). required: false default: 1 type: integer automatic_add: description: Automatically add new/unconfigured devices to Home Assistant if detected. required: false default: true type: boolean devices: description: A list of lights. required: false type: list keys: rflink_ids: description: RFLink ID of the device required: true type: map keys: name: description: Name for the device. required: false default: RFLink ID type: string type: description: "Override automatically detected type of the light device, can be: switchable, dimmable, hybrid or toggle. See Light Types below." required: false default: switchable type: string aliases: description: Alternative RFLink ID's this device is known by. required: false type: [list, string] group_aliases: description: "aliases which only respond to group commands." required: false type: [list, string] no_group_aliases: description: "aliases which do not respond to group commands." required: false type: [list, string] fire_event: description: Fire a button_pressed event if this device is turned on or off. required: false default: false type: boolean signal_repetitions: description: Repeat every RFLink command this number of times. required: false default: 1 type: integer group: description: Allow light to respond to group commands (ALLON/ALLOFF). required: false default: true type: boolean {% endconfiguration %}

Light state

Initially the state of a light is unknown. When the light is turned on or off (via frontend or remote) the state is known and will be shown in the frontend.

Sometimes a light is controlled by multiple remotes, each remote has its own code programmed in the light. To allow tracking of the state when switched via other remotes add the corresponding remote codes as aliases:

# Example configuration.yaml entry
light:
  - platform: rflink
    devices:
      newkaku_0000c6c2_1:
        aliases:
          - newkaku_000000001_2
          - kaku_000001_a

Any on/off command from any alias ID updates the current state of the light. However when sending a command through the frontend only the primary ID is used.

Light types

Light devices can come in different forms. Some only switch on and off, other support dimming. Dimmable devices might not always respond nicely to repeated on command as they turn into a pulsating state until on is pressed again (for example KlikAanKlikUit). The RFLink integration support three types of lights to make things work in every situation:

• Hybrid: This type sends a dim followed by an an on command; and off commands. This will make dimmable devices turn on at the requested dim level and on/off devices on. One caveat is this type is not compatible with signal repetition as multiple on signals will cause dimmers to go into disco mode.
• Switchable: Device type that sends only on and off commands. It work for both on/off and dimmable type switches. However dimmables might have issues with signal repetition (see above).
• Dimmable: Sends only dim and off commands. This does not work on on/off type devices as they don't understand the dim command. For dimmers this does not cause issues with signal repetitions.
• Toggle: Device type that sends only on commands to turn on or off the device. Some switches like for example Livolo light switches use the same 'on' command to switch on and switch off the lights. If the light is on and 'on' gets sent, the light will turn off and if the light is off and 'on' gets sent, the light will turn on. If the device has an unknown state, it will assume it is off by default.

By default new lights are assigned the switchable type. Protocol supporting dimming are assigned the hybrid type. Currently only newkaku protocol is detected as dimmable. Please refer to Device Support to get your dimmers supported.

Hiding/ignoring lights

Lights are added automatically when the RFLink gateway intercepts a wireless command in the ether. To prevent cluttering the frontend use any of these methods:

• Disable automatically adding of unconfigured new sensors (set automatic_add to false).
• Hide unwanted devices using customizations
• Ignore devices on a platform level

Device support

See device support

Additional configuration examples

Multiple lights with signal_repetitions and custom names

# Example configuration.yaml entry
light:
  - platform: rflink
    device_defaults:
      fire_event: true
      signal_repetitions: 2
    automatic_add: true
    devices:
      NewKaku_02a48800_0:
        name: Kitchen
        type: hybrid
      newkaku_0000c6c2_1:
        name: Living room
        aliases:
          - newkaku_000000001_2
          - kaku_000001_a
      Ansluta_ce30_0:
        name: Kitchen Under Counter Lights
      Maclean_0d82_01:
        name: Bedroom Lamp