jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-05-05 18:48:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
home-assistant.io/source/_components/switch.digitalloggers.markdown
DaveSergeant 5ae3d4b93d New platform support: Digital Loggers relay (#1528) 
Docs from prior work when I didn’t know what I was doing with git, branches or open source contributions.  There are still changes to be made on the code side and this will doubtless be updated.
2016-12-04 08:47:14 +01:00

2.0 KiB
Executable File
Raw Blame History

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release
layout title description date sidebar comments sharing footer logo ha_category ha_release
page Digital Loggers Switch Instructions how to integrate Digital Loggers DIN III relays into Home Assistant. 2016-10-02 10:00 true false true true digitalloggers.png Switch 0.35

The digitalloggers switch platform allows you to control the state of your Digital Loggers switches.

To use your digitalloggers switch in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
  - platform: digitalloggers
    host: 192.168.1.43
    password: SuperSecret123!!
    name: FantasticRelayDevice

Configuration variables:

  • host (Required): The IP address or FQDN of your DIN III relay, eg. 192.168.1.32 or myrelay.example.com.
  • name (Optional): The name to use when controlling this relay. Default: DINRelay.
  • username (Optional): Credentials for controlling this relay. Default: admin.
  • password (Optional): Credentials for controlling this relay. Default: admin.
  • timeout (Optional): Default timeout as set by the underlying python-dlipower library is 20 seconds. Override it if you need to. Valid range is 1 to 600.
  • cycletime (Optional): This is the delay enforced by the library when you send multiple commands to the same device. The default relay cycle time is 2 seconds. Override it if you need to. Valid range is 1 to 600. A delay is a recommendation of Digital Loggers:

Many loads draw more power when they are initially switched on. Sequencing prevents circuit overloads when loads devices are attached to a single circuit.

Your relays will be available in the form switch.fantasticrelaydevice_individualrelayname

Note: There is currently a limitation of the dlipower library used by the digitalloggers component that communication is only available over port 80.