home-assistant.io/source/_integrations/dynalite.markdown

title, description, ha_category, ha_iot_class, ha_release, ha_codeowners, ha_config_flow, ha_domain

title	description	ha_category	ha_iot_class	ha_release	ha_codeowners	ha_config_flow	ha_domain
Philips Dynalite	Instructions on setting up Philips Dynalite within Home Assistant.	Hub Light Switch Cover	Local Push	0.106	@ziv1234	true	dynalite

Philips Dynalite support is integrated into Home Assistant as a hub that can drive the light, switch, and cover platforms.

There is currently support for the following device types within Home Assistant:

• Lights
• Switches
• Covers

A Philips Dynalite hub connects to the Dynet network, which is composed of areas, channels, and preset.

A Dynalite area typically (although not necessarily) defines some physical area, such as a room.

Each area can have one or more channels that correspond to the different devices they control. A channel can relate to a dimmable light, or other devices.

Additionally, each area can have one or more presets that determine the behavior of all the channels, and sometimes trigger additional actions. Typically, preset 1 in an area means 'on', and preset '4' means off. Additional presets could be used for scenes and dimming.

Configuration

Since Philips Dynalite has virtually no auto-discover capabilities, it needs to be configured via the configuration.yaml file:

# Example configuration.yaml entry
dynalite:
  bridges:
    - host: DEVICE_IP_ADDRESS

{% configuration %} host: description: The IP address of the bridge (e.g., 192.168.1.10). required: true type: string port: description: Port number of the bridge. required: false type: integer default: 12345 name: description: Name for the bridge. required: false type: string default: dynalite active: description: "Actively query network. When starting, it will query all devices for their current status, and also will send queries when some changes are in progress (e.g., lights dimming or covers moving). Better experience but creates more load on the Dynalite network. Value can be on, off, our init, where init will only send queries during the initial init of Home Assistant." required: false type: [boolean, string] default: false polltimer: description: "Polling interval for devices in transition. Value in seconds. When devices are in transition (e.g., a light fading), it will ask for a new state every X seconds until it is at the target level. Only relevant when active is set to on." required: false type: float default: 1.0 autodiscover: description: Enable auto-discover. As Dynalite does not support native autodiscovery, this tracks events on your network, so if you turn on a light, it will be added to Home Assistant. required: false type: boolean default: false default: description: Global defaults for the system required: false type: map keys: fade: description: Default fade required: false type: float area: description: Definition for the various Dynalite areas. required: true type: map keys: AREA_NUMBER: description: The Dynalite area number, 1-255. required: true type: map keys: name: description: Name of the area. required: true type: string template: description: "Type of template to use for the area. Supported values are: room and time_cover. They are described in detail below in the template section. If the template parameters are different than defaults, they can be overridden in this section as well." require: false type: string default: No template TEMPLATE_PARAMS: description: "This can be any of the settings of the template. For example, for template room: room_on and room_off are possible options." required: false type: [integer, float] default: Value from template section or system defaults fade: description: Fade time for the area, in seconds. required: false type: float default: 2.0 preset: description: Specific presets for the area. required: false type: map keys: PRESET_NUMBER: description: The Dynalite preset number in the area. required: true type: map keys: name: description: Name of the preset. required: false type: string default: AREA_NAME Preset PRESET_NUMBER fade: description: Fade time for the preset, in seconds. required: false type: float default: 2.0 nodefault: description: Do not use the default presets defined globally, but only the specific ones defined for this area. required: false type: boolean default: false channel: description: Map of the channels in this area. required: false type: map keys: CHANNEL_NUMBER: description: The Dynalite channel number in the area, 1-255. required: true type: map keys: name: description: Name of the channel. required: false type: string default: AREA_NAME Channel CHANNEL_NUMBER type: description: "Type of entity this channel should appear as. Can be either light or if this is a device that is not a light (e.g., water heater), can be switch." require: false type: string default: light fade: description: Fade time for the channel, in seconds. required: false type: float default: 2.0 preset: description: "Default presets for any area without the nodefault option." required: false type: map keys: PRESET_NUMBER: description: The Dynalite preset number in the area. required: true type: map keys: name: description: "Name of the preset. When used in an area, it will be 'AREA_NAME name'. For example, if a room's name is 'Kitchen' and preset 4 is defined with the name Off, it will appear in HA as 'Kitchen Off'." required: false type: string default: AREA_NAME Preset PRESET_NUMBER fade: description: Fade time for the preset, in seconds. required: false type: float default: 2.0 template: description: Set the default parameters for the templates. required: false type: map keys: room: description: This is used to define a room that has a preset to turn on all the channels in the area and a preset to turn off. required: false type: map keys: room_on: description: Preset to turn area on. required: false type: integer default: 1 room_off: description: Preset to turn area off. required: false type: integer default: 4 time_cover: description: "This is used to define a cover that has 3 presets: open, close, and stop. Potentially can also use a channel that some systems (e.g., Control4) use to also send commands to open and close the cover. It uses the duration it takes to open or close to determine position. In addition, many times, these covers include tilt by opening or closing for a short time, so this can be defined as well." required: false type: map keys: open: description: Preset to open the cover. required: false type: integer default: 1 close: description: Preset to close the cover. required: false type: integer default: 2 stop: description: Preset to stop the cover. required: false type: integer default: 4 channel_cover: description: Channel that monitors the cover. required: false type: integer default: No channel duration: description: Time in seconds it takes to open or close the cover. required: false type: integer default: 60 tilt: description: "Time in seconds it takes to open or close the cover tilt. 0 means that the cover does not support tilt." require: false type: integer default: 0 class: description: "Type of cover for Home Assistant. Any of the possible cover classes (e.g. blind, garage, shutter) are possible." require: false type: string default: shutter {% endconfiguration %}

Examples

# Example configuration.yaml entry specifying optional parameters
dynalite:
  bridges:
    - host: DEVICE_IP_ADDRESS
      port: 12345
      autodiscover: true
      polltimer: 1
      area:
        '1':
          name: Office
          template: room
        '2':
          name: Living Room
          template: room
          nodefault: true
          room_on: 2
          room_off: 5
          channel:
            '2': 
              name: Entrance Spot
              fade: 10.0
            '3': 
              name: Dining Table
          preset:
            '5':
              name: Blinking Lights
            '6':
              name: All Off
              fade: 3.0
        '4':
          name: Curtain
          template: time_cover
      preset:
        '1':
          name: 'On'
        '4':
          name: 'Off'
      template:
        room:
          room_on: 1
          room_off: 4

Initial configuration and discovery

Maybe the most difficult thing about a Dynalite system is finding out the areas and channel mapping. If you have them or have access to the Dynalite software and your configuration files, this could be easy, but in the likely case that your system was installed by an integrator, you will have to discover them on your own.

This is where the autodiscover option comes handy. If it is on, the component will track the Dynet network and every time a device is used, it will be added to Home Assistant. It will initially show as "Area 123 Channel 7", but you can then add it to your configuration.yaml with the correct configuration.

For example, you would go to your kitchen light and turn it on. Now you log into Home Assistant and see what the channel was. If there was more than one discovered (e.g., someone turned off the living room lights), you can try one, turn it on and off in Home Assistant and see which light it affects.

The initial process can be a bit time consuming and tedious, but it only has to be done once. Once you are done configuring, it is better to set autodiscover to false, since there are many "fake" channels and areas that the system uses for internal communication and you do not want to have visible.