1.5 KiB
title, description, ha_category, ha_release, ha_iot_class, ha_codeowners, ha_domain
| title | description | ha_category | ha_release | ha_iot_class | ha_codeowners | ha_domain | ||
|---|---|---|---|---|---|---|---|---|
| Heatmiser | Instructions on how to integrate Heatmiser thermostats within Home Assistant. |
|
0.10 | Local Polling |
|
heatmiser |
The heatmiser climate platform let you control Heatmiser DT/DT-E/PRT/PRT-E thermostats from Heatmiser. The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.
Further work would be required to get this setup to connect over Wi-Fi, but the HeatmiserV3 Python module being used is a full implementation of the V3 protocol.
To set it up, add the following information to your configuration.yaml file:
climate:
- platform: heatmiser
host: YOUR_IP_ADDRESS
port: YOUR_PORT
tstats:
- id: THERMOSTAT_ID
name: THERMOSTAT_NAME
A single interface can handle up to 32 connected devices.
{% configuration %} host: description: The IP address of your interface. required: true type: string port: description: The port that the interface is listening on. required: true type: string tstats: description: A list of thermostats activated on the gateway. required: true type: list keys: id: description: The ID of the thermostat as configured on the device itself. required: true type: string name: description: A friendly name for the thermostat. required: true type: string {% endconfiguration %}