3.2 KiB
title, description, ha_category, ha_release, ha_iot_class, ha_domain
| title | description | ha_category | ha_release | ha_iot_class | ha_domain | |||
|---|---|---|---|---|---|---|---|---|
| PiFace Digital I/O (PFIO) | Instructions on how to integrate the PiFace Digital I/O module into Home Assistant. |
|
0.45 | Local Push | rpi_pfio |
The rpi_pfio integration is the base for all related PiFace Digital I/O (PFIO) platforms in Home Assistant. There is no setup needed for the integration itself; for the platforms, please check their corresponding pages.
There is currently support for the following device types within Home Assistant:
Set the jumpers on the PiFace board for address 0 (JP1: 1-2, JP2: 1-2).
Using with the Home Assistant Operating System
Note that the PiFace Digital 2 uses the Raspberry Pi SPI port, which is disabled by default when using the Home Assistant Operating System.
You must mount the SD card on another computer and access the boot partition on the card. Edit the config.txt file and add the line dtparam=spi=on to the end.
This should enable SPI when the Home Assistant Operating System is booted to access the PiFace Digital 2 board.
Binary Sensor
The rpi_pfio binary sensor platform allows you to read sensor values of the PiFace Digital I/O .
To use your PiFace Digital I/O module in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
binary_sensor:
- platform: rpi_pfio
ports:
0:
name: PIR Office
invert_logic: true
1:
name: Doorbell
settle_time: 50
{% configuration %}
ports:
description: List of used ports.
required: true
type: map
keys:
num:
description: The port number.
required: true
type: map
keys:
name:
description: The port name.
required: true
type: string
settle_time:
description: The time in milliseconds for port debouncing.
required: false
type: integer
default: 20
invert_logic:
description: If true, inverts the output logic to ACTIVE LOW.
required: false
type: boolean
default: "false (ACTIVE HIGH)"
{% endconfiguration %}
Switch
The rpi_pfio switch platform allows you to control the PiFace Digital I/O module.
To use your PiFace Digital I/O module in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
switch:
- platform: rpi_pfio
ports:
0:
name: Doorlock
invert_logic: true
1:
name: Light Desk
{% configuration %} ports: description: Array of used ports. required: true type: list keys: num: description: Port number. required: true type: list keys: name: description: Port name. required: true type: string invert_logic: description: If true, inverts the output logic to ACTIVE LOW. required: false default: false type: boolean {% endconfiguration %}