home-assistant.io/source/_components/automation.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category
page	Automation	Instructions how to setup automation within Home Assistant.	2015-01-20 22:36	true	false	true	true	home-assistant.png	Automation

This page will go into more detail about the various options the automation component offers. If you haven't yet, read the getting started page on automation.

A configuration section of an automation requires a trigger and an action section. condition and condition_type are optional. To keep this page compact, all following sections will not show the full configuration but only the relevant part.

• Jump to conditions
• Jump to actions
• Jump to troubleshooting

# Example of entry in configuration.yaml
automation:
# Turns on lights 1 hour before sunset if people are home
# and if people get home between 16:00-23:00
- alias: 'Rule 1 Light on in the evening'
  trigger:
    # Prefix the first line of each trigger configuration
    # with a '-' to enter multiple
    - platform: sun
      event: sunset
      offset: '-01:00:00'
    - platform: state
      entity_id: group.all_devices
      state: 'home'
  condition:
    # Prefix the first line of each condition configuration
    # with a '-'' to enter multiple
    - platform: state
      entity_id: group.all_devices
      state: 'home'
    - platform: time
      after: '16:00:00'
      before: '23:00:00'
  action:
    service: homeassistant.turn_on
    entity_id: group.living_room

# Turn off lights when everybody leaves the house
- alias: 'Rule 2 - Away Mode'
  trigger:
    platform: state
    entity_id: group.all_devices
    state: 'not_home'
  action:
    service: light.turn_off
    entity_id: group.all_lights

# Notify when Paulus leaves the house in the evening
- alias: 'Leave Home notification'
  trigger:
    platform: zone
    event: leave
    zone: zone.home
    entity_id: device_tracker.paulus
  condition:
    platform: time
    after: '20:00'
  action:
    service: notify.notify
    data:
      message: 'Paulus left the house'

{% linkable_title Triggers %}

Triggers are what starts the processing of an automation rule. It is possible to specify multiple triggers for the same rule. Once a trigger starts, Home Assistant will validate the conditions, if any, and call the action.

{% linkable_title Event trigger %}

Triggers when an event is being processed. Events are the raw building blocks of Home Assistant. You can match events on just the event name or also require specific event data to be present.

automation:
  trigger:
    platform: event
    event_type: MY_CUSTOM_EVENT
    # optional
    event_data:
      mood: happy

{% linkable_title MQTT trigger %}

Triggers when a specific message is received on given topic. Optionally can match on the payload being sent over the topic.

automation:
  trigger:
    platform: mqtt
    topic: living_room/switch/ac
    # Optional
    payload: 'on'

{% linkable_title Numeric state trigger %}

On state change of a specified entity, attempts to parse the state as a number and triggers if value is above and/or below a threshold.

automation:
  trigger:
    platform: numeric_state
    entity_id: sensor.temperature
    # Optional
    value_template: '{% raw %}{{ state.attributes.battery }}{% endraw %}'
    # At least one of the following required
    above: 17
    below: 25

{% linkable_title State trigger %}

Triggers when the state of an entity changes. If only entity_id given will match all state changes.

automation:
  trigger:
    platform: state
    entity_id: device_tracker.paulus
    # Optional
    from: 'not_home'
    to: 'home'
    # If given, will trigger when state has been the to state for X time.
    for:
      hours: 1
      minutes: 10
      seconds: 5

Use quotes around your values for `from` and `to` to avoid the YAML parser interpreting values as booleans.

{% linkable_title Sun trigger %}

Trigger when the sun is setting or rising. An optional time offset can be given to have it trigger for example 45 minutes before sunset, when dusk is setting in.

automation:
  trigger:
    platform: sun
    # Possible values: sunset, sunrise
    event: sunset
    # Optional time offset. This example is 45 minutes.
    offset: '-00:45:00'

{% linkable_title Template trigger %}

Template triggers work by evaluating a template on each state change. The trigger will fire if the state change caused the template to render 'true'. This is achieved by having the template result in a true boolean expression ({% raw %}{{ is_state('device_tracker.paulus', 'home') }}{% endraw %}) or by having the template render 'true' (example below).

automation:
  trigger:
    platform: template
    value_template: '{% raw %}{% if is_state('device_tracker.paulus', 'home') %}true{% endif %}{% endraw %}'

{% linkable_title Time trigger %}

Time can be triggered in many ways. The most common is to specify after and trigger at a specific point in time each day. Alternatively, you can also match if the hour, minute or second of the current time has a specific value. You can prefix the value with a / to match whenever the value is divisible by that number. You cannot use after together with hour, minute or second.

automation:
  trigger:
    platform: time
    # Matches every hour at 5 minutes past whole
    minutes: 5
    seconds: 0

automation 2:
  trigger:
    platform: time
    # When 'after' is used, you cannot also match on hour, minute, seconds.
    # Military time format.
    after: '15:32:00'

automation 3:
  trigger:
    platform: time
    # You can also match on interval. This will match every 5 minutes
    minutes: '/5'
    seconds: 0

{% linkable_title Zone trigger %}

Zone triggers can trigger when an entity is entering or leaving the zone. For zone automation to work, you need to have setup a device tracker platform that supports reporting GPS coordinates. Currently this is limited to the OwnTracks platform as well as the iCloud platform.

automation:
  trigger:
    platform: zone
    entity_id: device_tracker.paulus
    zone: zone.home
    # Event is either enter or leave
    event: enter

{% linkable_title Conditions %}

Conditions are an optional part of an automation rule and be used to prevent an action from happening when triggered. Conditions look very similar to triggers but are very different. A trigger will look at events happening in the system while a condition only looks at how the system looks right now. A trigger can observe that a switch is being turned on. A condition can only see if a switch is currently on or off.

An automation rule can have multiple conditions. By default the action will only fire if all conditions pass. An optional key condition_type: 'or' can be set on the automation rule to fire action if any condition matches. In the example below, the automation would trigger if the time is before 05:00 OR after 20:00.

automation:
  condition_type: or
  condition:
   - platform: time
     before: '05:00'
   - platform: time
     after: '20:00'

If your triggers and conditions are exactly the same, you can use a shortcut to specify conditions. In this case, triggers that are not valid conditions will be ignored.

automation:
  condition: use_trigger_values

{% linkable_title Numeric state condition %}

This type of condition attempts to parse the state of specified entity as a number and triggers if the value matches all of the above or below thresholds.
Either above or below, or both need to be specified. If both are used, the condition is true when the value is >= before and* < after.
You can optionally use a value_template to make the value of the entity the same type of value as the condition.

automation:
  condition:
    platform: numeric_state
    entity_id: sensor.temperature
    above: 17
    below: 25

{% linkable_title State condition %}

Tests if an entity is a specified state.

automation:
  condition:
    platform: state
    entity_id: device_tracker.paulus
    state: not_home
    # optional: trigger only if state was this for last X time.
    for:
      hours: 1
      minutes: 10
      seconds: 5

{% linkable_title Sun condition %}

The sun condition can test if the sun has already set or risen when a trigger occurs. The before and after keys can only be set to sunset or sunrise. They have a corresponding optional offset value (before_offset, after_offset) that can be added, similar to the sun trigger.

automation:
  condition:
    platform: sun
    after: sunset
    # Optional offset value
    after_offset: "-1:00:00"

{% linkable_title Template condition %}

The template condition will test if the given template renders a value equal to true. This is achieved by having the template result in a true boolean expression or by having the template render 'true'.

automation:
  condition:
    platform: template
    value_template: '{% raw %}{{ state.attributes.battery > 50 }}{% endraw %}'
    # Or value_template could be:
    # {% raw %}{% if state.attributes.battery > 50 %}true{% else %}false{% endif %}{% endraw %}

{% linkable_title Time condition %}

The time condition can test if it is after a specified time, before a specified time or if it is a certain day of the week

automation:
  condition:
    platform: time
    # At least one of the following is required.
    after: '15:00:00'
    before: '23:00:00'
    weekday:
      - mon
      - wed
      - fri

Valid values for weekday are (sun, mon, tue, wed, thu, fri & sat)

{% linkable_title Zone condition %}

Zone conditions test if an entity is in a certain zone. For zone automation to work, you need to have setup a device tracker platform that supports reporting GPS coordinates. Currently this is limited to the OwnTracks platform as well as the iCloud platform.

automation:
  condition:
    platform: zone
    entity_id: device_tracker.paulus
    zone: zone.home

{% linkable_title Actions %}

When an automation rule fires, it calls a service. For this service you can specify the entity_id that it should apply to and optional service parameters (to specify for example the brightness).

automation:
  # Change the light in the kitchen and living room to 150 brightness and color red.
  action:
    service: homeassistant.turn_on
    entity_id:
      - light.kitchen
      - light.living_room
    data:
      brightness: 150
      rgb_color: [255, 0, 0]

automation:
  # Notify me on my mobile phone of an event
  action:
    service: notify.notify
    data:
      message: Something just happened, better take a look!

If you want to specify multiple services to be called, or to include a delay, have a look at the script component. If you want to describe the desired state of certain entities, check out the scene component.

{% linkable_title Troubleshooting %}

You can verify that your automation rules are being initialized correctly by watching both the realtime logs (homeassistant.log in the configuration directory) and also the Logbook. The realtime logs will show the rules being initialized (once for each trigger), example:

INFO [homeassistant.components.automation] Initialized rule Rainy Day
INFO [homeassistant.components.automation] Initialized rule Rainy Day
INFO [homeassistant.components.automation] Initialized rule Rainy Day
INFO [homeassistant.components.automation] Initialized rule Rain is over

The Logbook component will show a line entry when an automation is triggered. You can look at the previous entry to determine which trigger in the rule triggered the event.