In case a group with the same id as used outside the container already
exists, do not create a group inside the container.
It seems that GitHub Action runners started to use primary group id 999
which is the default group id used by the Docker daemon.
* Initial commit of Home Assistant Green board support
* Add Home Assistant Green boot files
* HA Green board configs
* board/nabucasa: Unsupport rtc rk808
* Use odroid-m1 as Supervisor machine for now
* Green: linux: pmic: set set PWRON_LP_OFF_TIME 12s
* green: Update U-Boot to 2023.07.02
* green: supports usb boot
* green: uboot-boot.ush use rk3566-ha-green.dtb
* green: spinor supports uboot
* green: use U-Boot provided devtype as boot device type
* green: Fix polarity of power key
The power key is low active. Add patch to avoid accidential long press
being reported to user space.
* green: uboot: eeprom: add CONFIG_ENV_OVERWRITE
* green: uboot: eerprom: add mac read
* green: fix-cpufreq null issue
* green: board aliases ethernet0
* green: uboot mac set ethernet0
* green: uboot add serial-number read
* green: Update kernel 6.1.39
* green: add green to the build matrix
* green: fix 339d13 & 9b9416 can not boot from usb
* green: changfe sd mode, change led default state
* green: uboot add board.c to read eeprom info
* green: enable uboot to read eeprom info
* green: delete boot.scr read eeprom function
* green: change spl loader uboot order:sd-emmc-spi_nor
* green: serialnum change to 18 bytes
* green: Update kernel 6.1.43
* green: use hwrng support from ODROID-M1
* green: Use latest Rockchip BL31/DDR binaries
* change led_act polarity
* green: Disable watchdog
The watchdog on Green seems to not reliably reset the system. For now
disable the driver to avoid systemd making use of it.
* green: Update kernel 6.1.44
* green: Fix Supervisor Machine
Use odroid-m1 for now as Supervisor machine (used to download the
landing page).
* green: emmc use hs200 to increase speed
* green: use green as Supervisor machine
* green: Update kernel 6.1.45
* green: add Green to the kernel documentation
---------
Co-authored-by: Zhangqun Ming <north_sea@qq.com>
Co-authored-by: syan <syan.cham@gmail.com>
* Add ODROID-M1 to documentation
While at it, also use the new writing style for all Hardkernel boards by
changing Odroid to ODROID.
* Add ODROID-M1 board specific documentation
* Add NVMe information
* Apply suggestions from code review
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* RaspberryPi: Update kernel 5.15.61 - 1.20220830
* Add Yellow to the Raspberry Pi kernel update script
* Bump Yellow to kernel 5.15.61 - 1.20220830
Also drop the work around for the LED polarity as the new firmware
has been fixed.
* Explicitly select no kernel module compression
Home Assistant OS uses a compressed rootfs already, no compression for
kernel modules necessary.
* Bump buildroot
* buildroot d7e4c223e5...5468d36a26 (1):
> package/rpi-firmware: bump version to 1.20220830
* Use anonymous Docker volume as build output
Use anonymous Docker volumes as build output. This makes sure
every build is using a clean output directory.
* Add generic-aarch64 to the list of Kernels
* Bump buildroot
* buildroot 8bbb32c16a...962ff8c0d4 (1):
> package/rtl8812au-aircrack-ng: bump version to 3a6402e
* Fix kernel version for Raspberry Pi kernel based boards
* Linux: Update kernel 5.10.61 for ODROID-N2 (#1512)
Update the kernel to 5.10.61 for ODROID-N2 and fix the update script
to update kernel for ODROID-N2 next time too.
* Move ODROID kernel patches to non-kernel version specific directory
* Drop buildroot from git repository
Manage buildroot in a separate git repository and use a git submodule
to include it into the HAOS source tree.
This makes it easier to manage changes to buildroot since it can be
managed by git. A buildroot fork repository is being maintained with
the changes we currently have. It makes the buildroot-patches unnecessary
and should make it easier to rebase and upstream changes to buildroot.
* Remove buildroot-patches
Now that buildroot changes are managed in the buildroot fork repository
there is no need to manage patches in a separate directory.
* Initialize git submodule if necessary
* Move build directory to root
This avoids conflict/local modification issues with the buildroot
git submodule.
* Improve kernel update scripts
Use separate script for ODROID-N2 for now. Also warn if there are kernel
patches with a specific kernel version number in the source tree: They
typically can be just moved to the new kernel version, but one should
compile check them before committing.
* Rename Intel NUC machine to Generic x86-64
The Intel NUC machine has evolved and supports various x86-64 machines
today. Rename the board.
Note that this does not address the migration issue. This will be
handled separately.
* Update Scripts/Documentation
* Drop ODROID specific kernel update script
With the jump to Linux 5.10 LTS we can use the same upstream kernel for
Hardkernel ODROID boards as well. Extend the update-kernel-upstream.sh
to support the ODROID boards.
* Linux: Update kernel 5.10.13
This makes sure that the kernel module loop is loaded, the loop devices
under /dev have been created before the container starts. Docker uses
the current /dev as template for the container /dev. If the loop entries
are missing, loop devices can't be used inside the container. Use
losetup which does not make assumption weather loop support is built-in.
This fixes issues seen on my machine when entering the build environment
the first time after build:
mount: /mnt/data: failed to setup loop device for /export/data.ext4.
make[2]: *** [package/pkg-generic.mk:364: /build/buildroot/output_rpi4/build/hassio-1.0.0/.stamp_target_installed] Error 32
* Add support for the Orange Pi Prime
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
* Update opi_prime_defconfig
* Delete kernel.config
* Update opi_prime_defconfig
* Add hassos configuration for intel-nuc:
* Cloned from ova config
* Use default amd64 kernel config
* Add support for Intel IGB type nics
* Add rng-tools for better random
* Build with iwlwifi module & firmware (only newer modules with iwlmvm firmware)
* Include firmware for 915, which should improve power efficiency.
Build display and audio as a module to make it all work.
* Add intel_nuc to build script.
* Change directory structure as proposed by @pvizeli
* * Fix paths
* Remove unused patch directory
* Unduplicate barebox config.
