* Implement manual boot switch when downgrading to Barebox
When installing OS 7 or older from a OS 8 installation, the bootloader
is changed back to Barebox. However, in this case Barebox does not know
which boot slot is correct (and rauc won't update Barebox' state as it
is configured to work with GRUB in OS 8+).
This implements a poor mans version to switch the boot partition. It
clears Barebox state and deploys one of the two pre-configured default
states, booting either boot slot A or B.
* updated generic_raw_uart to latest version which comes with dualcopro
support for the HmIP-RFUSB usb rf-sticks by eQ3/ELV.
* remove 99-hmip-rfusb.rules to keep a HmIP-RFUSB device free from being
occupied by the cp210x driver but use the new generic_raw_uart support
instead allowing for advanced dualcopro support for HomeMatic/BidCos-RF
and homematicIP support in parallel.
To make HDMI CEC work, we have to compile MESON_DRM as a module
(see #1717). However, this essentially reverts #1347, which fixed the
reboot problem by compiling the driver into the kernel.
Hence we need to reintroduce the earlier fix from #1345, which reverts
the offending commit causing the reboot problem.
* Check if Busybox supports oflag
It seems that Busybox' dd shipped with OS release 5 and earlier does not
support oflag. Check if the flag is supported before making use of it.
* Exit if a command in the update scripts returns an error
This makes sure that the update isn't marked as successful in case there
is an error in the update script.
* ODROID XU4: Update U-Boot on eMMC boot partition
Update the U-Boot on the eMMC boot partition if present. Only write the
first megabyte as the eMMC boot partition might be smaller than the SPL
image and only the first megabyte is occupied by FW/BL1/BL2/TZSW (see
https://wiki.odroid.com/odroid-xu4/software/partition_table#tab__odroid-xu341).
* Bump buildroot
* buildroot 907739ed48...4c6c8fb767 (1):
> package/rpi-firmware: bump version to 71bd3109
* RaspberryPi: Update kernel 5.10.63 - oldstable_20211201
* Add Raspberry Pi Zero 2 W device tree
* Use LSI Logic SCSI controller in vmdk descriptor as well
For some reason, the vmdk disk format's descriptor contains the
controller type as well. By default, qemu-img sets it to "ide", which
seems not optimal especially for VMware's ESXi. Set adapter type to
commonly supported "lsilogic".
* Move ova image generation to hdd-image.sh
* Use OpenSSL to generate OVA manifest file (#826)
It seems that sha256sum adds a space after the hash algorithm which
causes "Invalid OVF checksum algorithm" on certain VMware virtualization
products.
Using OpenSSL avoids the space and makes the manifest file compatible
wiht VMware products.
* Use Buildroot provided OpenSSL binary
* Use SCSI controller by default
* Avoid race condition when fetching containers during build
So far only a single builder was active for each architecture. This
toghether with the naming scheme to include architecture/machine name
made sure that an image could only be fetched or used by a single
builder.
However, since most systems are now aarch64, multiple runners are now
active for a single architecture. This makes it necessary to lock
fetching/coping of container images to avoid race conditions.
Use rtl8812au driver provided by buildroot. This uses a newer verison of
the v5.6.4.2 branch which works with newer kernel and seems to be the
recommended branch.
Note: It seems that our buildroot package currently fails to properly
deploy the 88XXau.ko kernel module. Instead of fixing our version, just
move to the buildroot version.
These boards support the rather ancient ARMv6 architecture only. We
officially stopped supporting them already two releases ago, its time to
say goodbye.
* Add systemd-journal-remote to the image
This allows to access journald's log from within Supervisor and expose
more system logs to users.
* Allow to access systemd-journal-gatewayd from Supervisor
Create a systemd-journal-gatewayd.socket service using a Unix socket and
bind mount it into the Supervisor container. This allows to query
systemd-journald from Supervisor directly.
* Bump buildroot
* buildroot 73991f0fee...5b5dff3136 (1):
> package/linux-firmware: Add RTL8152/8153/8156 firmware
* Enable Realtek 8152/8153/8156 USB Ethernet adapter support
Enable kernel driver and install firmware for Realtek USB Ethernet
adapter. While at it, also enable some other common USB Ethernet
adapters which don't require firmwares.
