OS: Update supervisor 123

OS: Bump version 1.9
rpi: Update kernel & firmware 4.14.58 (#139 )
2025-08-11 05:59:21 +00:00 · 2018-08-03 23:02:04 +00:00 · 2018-08-03 12:32:07 +00:00 · 2018-08-03 12:31:33 +00:00 · 2018-08-03 12:31:14 +00:00 · 2018-08-03 12:30:59 +00:00
130 changed files with 1091 additions and 321 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1,2 @@
+/release
+*.pem
--- a/Documentation/bluetooth.md
+++ b/Documentation/bluetooth.md
@@ -0,0 +1,12 @@
+# Bluetooth
+
+We support `bluetoothctl` on host. Later we want also support bluetooth trought UI.
+All pairs and settings are persistent over reboots and updates.
+
+If you want setup bluetooth on host, use the *bluetoothctl* utility.
+
+## Scan devices
+
+```
+[bluetooth]# scan on
+```
--- a/Documentation/boards/ova.md
+++ b/Documentation/boards/ova.md
@@ -0,0 +1,16 @@
+# OVA
+
+The OVA stay for open virtual appliance. Currently we had remove the ova files and publish a vmdk virtual disk,
+until we have better OVF template to generate our OVA. This vmdk work with (maybe you need convert the disk):
+- HyperV
+- VirtualBox
+- VMware
+
+## Virtual Machine
+
+You can use this vmdk in a virtual machine with follow requirements:
+- OS: Linux 64bit
+- UEFI boot
+- min. 1GB RAM
+- 2x vcpu
+- 1x Network
--- a/Documentation/boards/raspberrypi.md
+++ b/Documentation/boards/raspberrypi.md
@@ -1,5 +1,23 @@
 # Raspberry PI

+Supported Hardware:
+
+| Device | Board | 
+|--------|-----------|
+| Raspberry Pi A+/B/B+| rpi |
+| Raspberry Pi Zero | rpi |
+| Raspberry Pi Zero W | rpi0-w |
+| Raspberry Pi 2 B | rpi2 |
+| Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
+
 ## Serial console

 For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.
+
+## Tweaks
+
+If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
--- a/Documentation/build.md
+++ b/Documentation/build.md
@@ -0,0 +1,21 @@
+# Building
+
+Running `sudo ./enter.sh` will get you into the build Docker container.   
+`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+
+## Scripts
+
+
+
+## Helpers
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig`
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config`
--- a/Documentation/configuration.md
+++ b/Documentation/configuration.md
@@ -2,18 +2,23 @@

 ## Automatic

-You can format a USB stick with FAT32 and name it with `hassos-config`. The layout could be look like:
+You can use a USB drive with HassOS to configure network options, ssh access to the host, and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Use the following directory structure within the USB drive:
+
 ```
 network/
 modules/
-known_hosts
-hassos-xy.rauc
+authorized_keys
+hassos-xy.raucb
 ```

- On `network` folder can hold any kind of NetworkManager connections files.
- The folder `modules` is for modules-load configuration files.
- `known_hosts` file activate debug SSH access of port `22222`.
- For firmware updates you can but the `hassos-*.rauc` OTA update they should be install. 
+- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
+- The `modules` folder is for modules-load configuration files.
+- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 
+
+You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host.

 ## Local

@@ -25,5 +30,11 @@ You can edit or create a `cmdline.txt` into your boot partition. That will be re

 The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].

+### Network
+
+You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.

 [systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
+[network.md]: network.md
+[hassos-release]: https://github.com/home-assistant/hassos/releases/
+[debug-hassio]: https://developers.home-assistant.io/docs/en/hassio_debugging.html
--- a/Documentation/deployment.md
+++ b/Documentation/deployment.md
@@ -0,0 +1,27 @@
+# Deployment
+
+We know 3 types of release builds:
+- development (beta/dev)
+- staging (rc)
+- production (stable)
+
+## Versioning
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development use here own major number they will be bump for the stable version and the development version go to next major number.
+
+```
+0.x = development
+1.x = stable
+2.x = development
+3.x = stable
+```
+
+## GIT Branch/Tag
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch hould the development
+version from they we build a beta release.
+
+If we create a new staging/productive release, we create a new branch `rel-{MAJOR}`. They will be used for the hole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -0,0 +1,7 @@
+
+# Kernel Version
+
+| Board | Version |
+|-------|---------|
+| Open Virtual Applicance | 4.14.59 |
+| Raspberry Pi | 4.14.58 |
--- a/Documentation/network.md
+++ b/Documentation/network.md
@@ -0,0 +1,97 @@
+# Network
+
+HassOS uses NetworkManager to control the host network. In future releases, you will be able to set up the configuration using the API/UI. Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
+
+## Configuration Examples
+
+You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid]. Inside the `network` folder create the file `my-network` and add the appropriate contents below:
+
+### Default
+
+We have a preinstalled connection profile:
+```
+[connection]
+id=HassOS default
+uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### LAN
+```ini
+[connection]
+id=hassos-network
+uuid=d55162b4-6152-4310-9312-8f4c54d86afa
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Wireless WPA/PSK
+```ini
+[connection]
+id=hassos-network
+uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
+type=802-11-wireless
+
+[802-11-wireless]
+mode=infrastructure
+ssid=MY_SSID
+
+[802-11-wireless-security]
+auth-alg=open
+key-mgmt=wpa-psk
+psk=MY_WLAN_SECRED_KEY
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Static IP
+
+Replace follow configs:
+```ini
+[ipv4]
+method=manual
+address1=192.168.1.111/24,192.168.1.1
+dns=8.8.8.8;8.8.4.4;
+```
+
+## Tips
+
+### Reset network
+
+If you want reset the network configuration to default, use follow commands on host:
+```bash
+$ rm /etc/NetworkManager/system-connections/*
+$ cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
+$ nmcli con reload
+```
+
+### Powersave
+
+If you have trouble with powersave you can do following:
+```ini
+[wifi]
+# Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
+powersave=0
+```
+
+[keyfile]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
+[configuration-usb]: configuration.md
+[uuid]: https://www.uuidgenerator.net/
--- a/README.md
+++ b/README.md
@@ -12,20 +12,3 @@ Hass.io OS based on [buildroot](https://buildroot.org/). It's a hypervisor for D
 - AppArmor protected
 - ZRAM LZ4 for /tmp, /var, swap
 - Run every supervisor
-
-# Building
-Running `sudo ./enter.sh` will get you into the build Docker container.   
-`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
-
-## Helpers
-
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig`
-
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig`
- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config`
--- a/buildroot-external/Config.in
+++ b/buildroot-external/Config.in
@@ -1,3 +1,4 @@
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassos/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
--- a/buildroot-external/apparmor/hassio-supervisor
+++ b/buildroot-external/apparmor/hassio-supervisor
@@ -1,75 +0,0 @@
-#include <tunables/global>
-
-profile hassio-supervisor flags=(attach_disconnected,mediate_deleted) {
-  #include <abstractions/base>
-  #include <abstractions/python>
-
-  network,
-  deny network raw,
-
-  signal (send) set=(kill,term),
-
-  /bin/busybox ix,
-  /usr/bin/python{,3,3.[0-9]} ix,
-  /usr/bin/git cx,
-  /usr/bin/socat cx,
-  /usr/bin/gdbus cx,
-
-  deny /proc/** wl,
-  deny /root/** wl,
-  deny /sys/** wl,
-
-  /** r,
-  /tmp/** rw,
-  /data/** rw,
-  /{,var/}run/docker.sock rw,
-
-  capability net_bind_service,
-
-  profile /usr/bin/socat flags=(attach_disconnected,mediate_deleted) {
-    #include <abstractions/base>
-
-    network inet udp,
-    network inet tcp,
-
-    deny network raw,
-    deny network packet,
-
-    signal (receive) set=(kill,term),
-    capability net_bind_service,
-
-    /lib/* mr,
-    /usr/bin/socat mr,
-  }
-
-  profile /usr/bin/gdbus flags=(attach_disconnected,mediate_deleted) {
-    #include <abstractions/base>
-    #include <abstractions/dbus>
-
-    unix (send, receive) type=stream,
-
-    /usr/bin/gdbus mr,
-    /lib/* mr,
-    /{,var/}run/dbus/system_bus_socket rw,
-  }
-
-  profile /usr/bin/git flags=(attach_disconnected,mediate_deleted) {
-    #include <abstractions/base>
-
-    network,
-    deny network raw,
-
-    /bin/busybox ix,
-    /usr/bin/git mr,
-    /usr/libexec/git-core/* ix,
-
-    deny /data/homeassistant rw,
-    deny /data/ssl rw,
-
-    /** r,
-    /lib/* mr,
-    /data/addons/** lrw,
-
-    capability dac_override,
-  }
-}
--- a/buildroot-external/board/ova/info
+++ b/buildroot-external/board/ova/info
@@ -2,3 +2,4 @@ BOARD_ID=ova
 BOARD_NAME="Open Virtual Appliance"
 CHASSIS=vm
 BOOTLOADER=barebox
+KERNEL_FILE=bzImage
--- a/buildroot-external/board/ova/kernel.config
+++ b/buildroot-external/board/ova/kernel.config
@@ -1 +1,17 @@
-CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB=y
+
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_ACM=m
+
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=m
+CONFIG_VIRTIO_BLK=m
+
--- a/buildroot-external/board/ova/patches/rauc/0001-add-i-argument-to.patch
+++ b/buildroot-external/board/ova/patches/rauc/0001-add-i-argument-to.patch
@@ -17,7 +17,7 @@ index d5efc0c..c57c2f7 100644
 	g_ptr_array_add(args, g_strdup_printf(BOOTSTATE_PREFIX ".%s.remaining_attempts", bootname));
 +
 +	g_ptr_array_add(args, g_strdup("-i"));
-+	g_ptr_array_add(args, g_strdup("/mnt/boot/EFI/barebox/state.dtb"));
+	g_ptr_array_add(args, g_strdup("/etc/barebox-state.dtb"));
 	g_ptr_array_add(args, NULL);
 
 	sub = g_subprocess_newv((const gchar * const *)args->pdata,
@@ -27,7 +27,7 @@ index d5efc0c..c57c2f7 100644
 	}
 +
 +	g_ptr_array_add(args, g_strdup("-i"));
-+	g_ptr_array_add(args, g_strdup("/mnt/boot/EFI/barebox/state.dtb"));
+	g_ptr_array_add(args, g_strdup("/etc/barebox-state.dtb"));
 	g_ptr_array_add(args, NULL);
 
 	sub = g_subprocess_newv((const gchar * const *)args->pdata,
--- a/buildroot-external/board/ova/post-image.sh
+++ b/buildroot-external/board/ova/post-image.sh
@@ -6,12 +6,11 @@ BOARD_DIR=${2}
 BOOT_DATA=${BINARIES_DIR}/boot

 . ${SCRIPT_DIR}/hdd-image.sh
+. ${SCRIPT_DIR}/name.sh
+. ${SCRIPT_DIR}/ota.sh
 . ${BR2_EXTERNAL_HASSOS_PATH}/info
 . ${BOARD_DIR}/info

-# Filename
-IMAGE_FILE=${HASSOS_ID}_${BOARD_ID}-${VERSION_MAJOR}.${VERSION_BUILD}.vmdk
-
 # Init boot data
 rm -rf ${BOOT_DATA}
 mkdir -p ${BOOT_DATA}/EFI/BOOT
@@ -23,10 +22,9 @@ cp ${BR2_EXTERNAL_HASSOS_PATH}/misc/barebox-state-efi.dtb ${BOOT_DATA}/EFI/bareb
 echo "console=tty1" > ${BOOT_DATA}/cmdline.txt

 # Create other layers
-create_boot_image ${BINARIES_DIR}
-create_overlay_image ${BINARIES_DIR}
-create_kernel_image ${BINARIES_DIR} bzImage
+prepare_disk_image

-create_disk_image ${BINARIES_DIR} ${BINARIES_DIR}/harddisk.img 6
-
-qemu-img convert -O vmdk ${BINARIES_DIR}/harddisk.img ${BINARIES_DIR}/${IMAGE_FILE}
+# Create disk images
+create_disk_image 6
+convert_disk_image_vmdk
+create_ota_update
--- a/buildroot-external/board/raspberrypi/post-image.sh
+++ b/buildroot-external/board/raspberrypi/post-image.sh
@@ -6,19 +6,11 @@ BOARD_DIR=${2}
 BOOT_DATA=${BINARIES_DIR}/boot

 . ${SCRIPT_DIR}/hdd-image.sh
+. ${SCRIPT_DIR}/name.sh
+. ${SCRIPT_DIR}/ota.sh
 . ${BR2_EXTERNAL_HASSOS_PATH}/info
 . ${BOARD_DIR}/info

-# Filename
-IMAGE_FILE=${BINARIES_DIR}/${HASSOS_ID}_${BOARD_ID}-${VERSION_MAJOR}.${VERSION_BUILD}.img
-
-# Eval kernel name
-if [ "$BOARD_ID" == "rpi3-64" ]; then
-    KERNEL_NAME="Image"
-else
-    KERNEL_NAME="zImage"
-fi
-
 # Init boot data
 rm -rf ${BOOT_DATA}
 mkdir -p ${BOOT_DATA}
@@ -43,17 +35,14 @@ cp -r ${BINARIES_DIR}/rpi-firmware/overlays ${BOOT_DATA}/
 echo "dwc_otg.lpm_enable=0 console=tty1" > ${BOOT_DATA}/cmdline.txt

 # Enable 64bit support
-if [ "$BOARD_ID" == "rpi3-64" ]; then
+if [ "${BOARD_ID}" == "rpi3-64" ]; then
    echo "arm_64bit=1" >> ${BOOT_DATA}/config.txt
 fi

 # Create other layers
-create_boot_image ${BINARIES_DIR}
-create_overlay_image ${BINARIES_DIR}
-create_kernel_image ${BINARIES_DIR} ${KERNEL_NAME}
+prepare_disk_image

-create_disk_image ${BINARIES_DIR} ${IMAGE_FILE} 2
-fix_disk_image_mbr ${IMAGE_FILE}
-
-rm -rf ${IMAGE_FILE}.gz
-gzip --best ${IMAGE_FILE}
+create_disk_image 2
+fix_disk_image_mbr
+convert_disk_image_gz
+create_ota_update
--- a/buildroot-external/board/raspberrypi/rpi/info
+++ b/buildroot-external/board/raspberrypi/rpi/info
@@ -2,3 +2,4 @@ BOARD_ID=rpi
 BOARD_NAME="RaspberryPi"
 CHASSIS=embedded
 BOOTLOADER=uboot
+KERNEL_FILE=zImage
--- a/buildroot-external/board/raspberrypi/rpi/uboot.config
+++ b/buildroot-external/board/raspberrypi/rpi/uboot.config
@@ -1,2 +0,0 @@
-CONFIG_TARGET_RPI=y
-CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b"
--- a/buildroot-external/board/raspberrypi/rpi0-w/info
+++ b/buildroot-external/board/raspberrypi/rpi0-w/info
@@ -2,3 +2,4 @@ BOARD_ID=rpi0-w
 BOARD_NAME="RaspberryPi Zero-W"
 CHASSIS=embedded
 BOOTLOADER=uboot
+KERNEL_FILE=zImage
--- a/buildroot-external/board/raspberrypi/rpi0-w/uboot.config
+++ b/buildroot-external/board/raspberrypi/rpi0-w/uboot.config
@@ -1,2 +0,0 @@
-CONFIG_TARGET_RPI_0_W=y
-CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w"
--- a/buildroot-external/board/raspberrypi/rpi2/info
+++ b/buildroot-external/board/raspberrypi/rpi2/info
@@ -2,3 +2,4 @@ BOARD_ID=rpi2
 BOARD_NAME="RaspberryPi 2"
 CHASSIS=embedded
 BOOTLOADER=uboot
+KERNEL_FILE=zImage
--- a/buildroot-external/board/raspberrypi/rpi2/uboot.config
+++ b/buildroot-external/board/raspberrypi/rpi2/uboot.config
@@ -1,2 +0,0 @@
-CONFIG_TARGET_RPI_2=y
-CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b"
--- a/buildroot-external/board/raspberrypi/rpi3-64/info
+++ b/buildroot-external/board/raspberrypi/rpi3-64/info
@@ -2,3 +2,4 @@ BOARD_ID=rpi3-64
 BOARD_NAME="RaspberryPi 3 64bit"
 CHASSIS=embedded
 BOOTLOADER=uboot
+KERNEL_FILE=Image
--- a/buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh
+++ b/buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh
@@ -3,7 +3,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3

 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait cgroup_enable=memory"

 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype

 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs

 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
  fi
 done

+setenv fdt_addr
 if test -n "${bootargs}"; then
  saveenv
 else
@@ -48,4 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr}
+booti ${kernel_addr_r} - ${fdt_org}
+
+echo "Fails on boot"
+reset
--- a/buildroot-external/board/raspberrypi/rpi3-64/uboot.config
+++ b/buildroot-external/board/raspberrypi/rpi3-64/uboot.config
@@ -1,5 +0,0 @@
-CONFIG_TARGET_RPI_3=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
-CONFIG_PHYLIB=y
-CONFIG_USB_ETHER_LAN78XX=y
--- a/buildroot-external/board/raspberrypi/rpi3/info
+++ b/buildroot-external/board/raspberrypi/rpi3/info
@@ -2,3 +2,4 @@ BOARD_ID=rpi3
 BOARD_NAME="RaspberryPi 3"
 CHASSIS=embedded
 BOOTLOADER=uboot
+KERNEL_FILE=zImage
--- a/buildroot-external/board/raspberrypi/rpi3/uboot.config
+++ b/buildroot-external/board/raspberrypi/rpi3/uboot.config
@@ -1,5 +0,0 @@
-CONFIG_TARGET_RPI_3_32B=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
-CONFIG_PHYLIB=y
-CONFIG_USB_ETHER_LAN78XX=y
--- a/buildroot-external/board/raspberrypi/uboot-boot.sh
+++ b/buildroot-external/board/raspberrypi/uboot-boot.sh
@@ -3,7 +3,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3

 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait cgroup_enable=memory"

 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype

 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs

 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
  fi
 done

+setenv fdt_addr
 if test -n "${bootargs}"; then
  saveenv
 else
@@ -48,4 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr}
+bootz ${kernel_addr_r} - ${fdt_org}
+
+echo "Fails on boot"
+reset
--- a/buildroot-external/board/raspberrypi/uboot.config
+++ b/buildroot-external/board/raspberrypi/uboot.config
@@ -1,25 +1,3 @@
-CONFIG_ARM=y
-CONFIG_ARCH_BCM283X=y
-CONFIG_SYS_TEXT_BASE=0x00008000
-CONFIG_OF_BOARD_SETUP=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_OF_EMBED=y
-CONFIG_DM_KEYBOARD=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_BCM2835=y
-CONFIG_DM_ETH=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_GENERIC is not set
-# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_KEYBOARD=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_DM_VIDEO=y
-CONFIG_PHYS_TO_BUS=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_ENV_FAT_INTERFACE is not set
+# CONFIG_ENV_FAT_DEVICE_AND_PART is not set
--- a/buildroot-external/bootloader/barebox/menu/10-boot-A/action
+++ b/buildroot-external/bootloader/barebox/menu/10-boot-A/action
@@ -1,3 +1,5 @@
 #!/bin/sh

+global linux.bootargs.bootchooser="bootchooser.active=A"
+
 boot system0
--- a/buildroot-external/bootloader/barebox/menu/20-boot-B/action
+++ b/buildroot-external/bootloader/barebox/menu/20-boot-B/action
@@ -1,3 +1,5 @@
 #!/bin/sh

+global linux.bootargs.bootchooser="bootchooser.active=B"
+
 boot system1
--- a/buildroot-external/bootloader/uboot.config
+++ b/buildroot-external/bootloader/uboot.config
@@ -13,7 +13,4 @@ CONFIG_FS_EXT4=y
 # CONFIG_ENV_IS_IN_EXT4 is not set
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_CONSOLE_SCROLL_LINES=10
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_REGEX=y
-CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set
--- a/buildroot-external/busybox.config
+++ b/buildroot-external/busybox.config
@@ -398,7 +398,7 @@ CONFIG_SHOWKEY=y
 CONFIG_AWK=y
 CONFIG_FEATURE_AWK_LIBM=y
 CONFIG_FEATURE_AWK_GNU_EXTENSIONS=y
-# CONFIG_CMP is not set
+CONFIG_CMP=y
 # CONFIG_DIFF is not set
 # CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
 # CONFIG_FEATURE_DIFF_DIR is not set
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -18,11 +18,10 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova/post-image.s
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.59"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -30,6 +29,7 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_DT_UTILS=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
@@ -37,8 +37,13 @@ BR2_PACKAGE_CA_CERTIFICATES=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -72,11 +77,13 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
--- a/buildroot-external/configs/rpi0_w_defconfig
+++ b/buildroot-external/configs/rpi0_w_defconfig
@@ -21,13 +21,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a06f9e522301dfacc1f382d72e6a9792d8350328"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -35,6 +34,7 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
@@ -45,8 +45,13 @@ BR2_PACKAGE_LIBDNET=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -69,8 +74,7 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-w/uboot.config"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_0_w"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
@@ -82,11 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y
--- a/buildroot-external/configs/rpi2_defconfig
+++ b/buildroot-external/configs/rpi2_defconfig
@@ -21,13 +21,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a06f9e522301dfacc1f382d72e6a9792d8350328"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -35,6 +34,7 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
@@ -44,8 +44,13 @@ BR2_PACKAGE_LIBDNET=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -68,8 +73,7 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2/uboot.config"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_2"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
@@ -81,11 +85,13 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
--- a/buildroot-external/configs/rpi3_64_defconfig
+++ b/buildroot-external/configs/rpi3_64_defconfig
@@ -21,13 +21,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a06f9e522301dfacc1f382d72e6a9792d8350328"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2837-rpi-3-b broadcom/bcm2710-rpi-3-b-plus"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -35,8 +34,9 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
-BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_UBOOT_TOOLS=y
@@ -45,8 +45,13 @@ BR2_PACKAGE_LIBDNET=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -69,12 +74,11 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-64/uboot.config"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_3"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
-BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot-boot64.sh"
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-64/uboot-boot.sh"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_E2FSPROGS=y
 BR2_PACKAGE_HOST_GPTFDISK=y
@@ -82,11 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y
--- a/buildroot-external/configs/rpi3_defconfig
+++ b/buildroot-external/configs/rpi3_defconfig
@@ -21,13 +21,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a06f9e522301dfacc1f382d72e6a9792d8350328"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -35,8 +34,9 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
-BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_UBOOT_TOOLS=y
@@ -45,8 +45,13 @@ BR2_PACKAGE_LIBDNET=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -69,8 +74,7 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3/uboot.config"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_3_32b"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
@@ -82,11 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y
--- a/buildroot-external/configs/rpi_defconfig
+++ b/buildroot-external/configs/rpi_defconfig
@@ -21,13 +21,12 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a06f9e522301dfacc1f382d72e6a9792d8350328"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
@@ -35,6 +34,7 @@ BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
 BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
+BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
@@ -44,8 +44,13 @@ BR2_PACKAGE_LIBDNET=y
 BR2_PACKAGE_LIBCGROUP=y
 BR2_PACKAGE_LIBCGROUP_TOOLS=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -68,8 +73,7 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.05"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi/uboot.config"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
@@ -81,11 +85,13 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="107"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="123"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
+BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="3"
+BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
--- a/buildroot-external/info
+++ b/buildroot-external/info
@@ -1,7 +1,7 @@
-VERSION_MAJOR=0
-VERSION_BUILD=5
+VERSION_MAJOR=1
+VERSION_BUILD=9

 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"

-DEPLOYMENT="development"
+DEPLOYMENT="production"
--- a/buildroot-external/kernel.config
+++ b/buildroot-external/kernel.config
@@ -97,3 +97,4 @@ CONFIG_EFI_PARTITION=y

 # CONFIG_LOGO is not set
 # CONFIG_VIRTUALIZATION is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
--- a/buildroot-external/rootfs-overlay/etc/fw_env.config
+++ b/buildroot-external/rootfs-overlay/etc/fw_env.config
--- a/buildroot-external/misc/rauc-hook
+++ b/buildroot-external/misc/rauc-hook
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+##
+# Hooks
+
+# Handle boot hocks
+if [ "${RAUC_SLOT_CLASS}" = "boot" ]; then
+    if [ "${1}" = "slot-post-install" ]; then
+        /usr/lib/rauc/post-install-boot 
+    elif [ "${1}" = "slot-pre-install" ]; then
+        /usr/lib/rauc/pre-install-boot 
+    fi
+fi
+
+##
+# Fixups
+
+# timesyncd
+if [ -L /var/lib/systemd/timesync ]; then
+    rm -f /var/lib/systemd/timesync
+fi
+
+# u-boot first stage device tree
+if [ -e /usr/sbin/fw_setenv ]; then
+    fw_setenv fdt_addr
+fi
+
+exit 0
--- a/buildroot-external/package/bluetooth-bcm43xx/Config.in
+++ b/buildroot-external/package/bluetooth-bcm43xx/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_BLUETOOTH_BCM43XX
+	bool "bluetooth bcm43xx"
+	depends on BR2_PACKAGE_BLUEZ5_UTILS_CLIENT
+	select BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED
+	help
+	  Install bluetooth for bcm43xx. 
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+HCIATTACH=/usr/bin/hciattach
+SERIAL=`cat /proc/device-tree/serial-number | cut -c9-`
+B1=`echo $SERIAL | cut -c3-4`
+B2=`echo $SERIAL | cut -c5-6`
+B3=`echo $SERIAL | cut -c7-8`
+BDADDR=`printf b8:27:eb:%02x:%02x:%02x $((0x$B1 ^ 0xaa)) $((0x$B2 ^ 0xaa)) $((0x$B3 ^ 0xaa))`
+
+if [ "$(cat /proc/device-tree/aliases/uart0)" = "$(cat /proc/device-tree/aliases/serial1)" ] ; then
+    if [ "$(wc -c /proc/device-tree/soc/gpio@7e200000/uart0_pins/brcm\,pins | cut -f 1 -d ' ')" = "16" ] ; then
+        $HCIATTACH /dev/serial1 bcm43xx 3000000 flow - $BDADDR
+    else
+		$HCIATTACH /dev/serial1 bcm43xx 921600 noflow - $BDADDR
+    fi
+else
+    $HCIATTACH /dev/serial1 bcm43xx 460800 noflow - $BDADDR
+fi
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
@@ -0,0 +1,31 @@
+################################################################################
+#
+# Bluetooth BCM43xx
+#
+################################################################################
+
+BLUETOOTH_BCM43XX_VERSION = 1.0.0
+BLUETOOTH_BCM43XX_LICENSE = Apache License 2.0
+BLUETOOTH_BCM43XX_LICENSE_FILES = $(BR2_EXTERNAL_HASSOS_PATH)/../LICENSE
+BLUETOOTH_BCM43XX_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-bcm43xx
+BLUETOOTH_BCM43XX_SITE_METHOD = local
+
+define BLUETOOTH_BCM43XX_BUILD_CMDS
+	curl -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM43430A1.hcd
+	curl -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM4345C0.hcd
+endef
+
+define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS
+	$(INSTALL) -d $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants
+	$(INSTALL) -m 0755 $(@D)/bluetooth-bcm43xx $(TARGET_DIR)/usr/sbin/
+	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.service $(TARGET_DIR)/usr/lib/systemd/system/
+	ln -fs /usr/lib/systemd/system/bluetooth-bcm43xx.service $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants/
+
+	$(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm
+	$(INSTALL) -m 0644 $(@D)/*.hcd $(TARGET_DIR)/lib/firmware/brcm/
+
+	$(INSTALL) -d $(TARGET_DIR)/etc/udev/rules.d
+	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.rules $(TARGET_DIR)/etc/udev/rules.d/
+endef
+
+$(eval $(generic-package))
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules
@@ -0,0 +1,22 @@
+KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
+        ALIASES=/proc/device-tree/aliases; \
+        if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+                echo 0;\
+        elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+                echo 1; \
+        else \
+                exit 1; \
+        fi\
+'", SYMLINK+="serial%c"
+
+KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
+        ALIASES=/proc/device-tree/aliases; \
+        if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+                echo 0; \
+        elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+                echo 1; \
+        else \
+                exit 1; \
+        fi \
+'", SYMLINK+="serial%c"
+
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Bluetooth for BCM43xx
+Before=bluetooth.service
+After=dev-ttyAMA0.device
+ConditionPathIsDirectory=/proc/device-tree/soc/gpio@7e200000/bt_pins
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/bluetooth-bcm43xx
+
+[Install]
+WantedBy=hassos-hardware.target
--- a/buildroot-external/package/hassos/Config.in
+++ b/buildroot-external/package/hassos/Config.in
@@ -28,6 +28,11 @@ config BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE
 	help
 	  AppArmor profile for supervisor.

+config BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL
+	string "AppArmor supervisor profile URL"
+	help
+	  AppArmor profile for supervisor url.
+
 config BR2_PACKAGE_HASSOS_CLI
 	string "cli docker image"
 	help
@@ -48,9 +53,14 @@ config BR2_PACKAGE_HASSOS_CLI_PROFILE
 	help
 	  AppArmor profile for cli.

+config BR2_PACKAGE_HASSOS_CLI_PROFILE_URL
+	string "AppArmor cli profile url"
+	help
+	  AppArmor profile for cli url.
+
 config BR2_PACKAGE_HASSOS_APPARMOR_DIR
 	string "AppArmor profiles folder"
 	help
-	  AppArmor profiles folder for supervisor.
+	  AppArmor profiles folder for HassOS.

 endif
--- a/buildroot-external/package/hassos/builder/Dockerfile
+++ b/buildroot-external/package/hassos/builder/Dockerfile
@@ -2,7 +2,7 @@ FROM alpine:3.7

 # Install packages
 RUN apk add --no-cache \
-    bash coreutils e2fsprogs
+    bash coreutils e2fsprogs curl
 RUN apk add --no-cache --repository http://nl.alpinelinux.org/alpine/v3.7/community \
    docker

--- a/buildroot-external/package/hassos/builder/hostapp.sh
+++ b/buildroot-external/package/hassos/builder/hostapp.sh
@@ -5,10 +5,12 @@ SUPERVISOR=""
 SUPERVISOR_VERSION=""
 SUPERVISOR_ARGS=""
 SUPERVISOR_PROFILE=""
+SUPERVISOR_PROFILE_URL=""
 CLI=""
 CLI_VERSION=""
 CLI_ARGS=""
 CLI_PROFILE=""
+CLI_PROFILE_URL=""
 APPARMOR=""
 DATA_IMG="/export/data.ext4"

@@ -32,6 +34,10 @@ while [[ $# -gt 0 ]]; do
            SUPERVISOR_PROFILE=$2
            shift
            ;;
+        --supervisor-profile-url)
+            SUPERVISOR_PROFILE_URL=$2
+            shift
+            ;;
        --cli)
            CLI=$2
            shift
@@ -48,6 +54,10 @@ while [[ $# -gt 0 ]]; do
            CLI_PROFILE=$2
            shift
            ;;
+        --cli-profile-url)
+            CLI_PROFILE_URL=$2
+            shift
+            ;;
        --apparmor)
            APPARMOR=$2
            shift
@@ -106,7 +116,16 @@ EOF
 # Setup AppArmor
 if [ ! -z "${APPARMOR}" ]; then
    mkdir -p /mnt/data/${APPARMOR}
-    cp -f /apparmor/* /mnt/data/${APPARMOR}/
+
+    # Supervisor
+    if [ ! -z "${SUPERVISOR_PROFILE_URL}" ]; then
+        curl -L -o /mnt/data/${APPARMOR}/${SUPERVISOR_PROFILE} ${SUPERVISOR_PROFILE_URL}
+    fi
+
+    # CLI
+    if [ ! -z "${CLI_PROFILE_URL}" ]; then
+        curl -L -o /mnt/data/${APPARMOR}/${CLI_PROFILE} ${CLI_PROFILE_URL}
+    fi
 fi

 # Finish
--- a/buildroot-external/package/hassos/hassos.mk
+++ b/buildroot-external/package/hassos/hassos.mk
@@ -17,16 +17,17 @@ endef
 define HASSOS_INSTALL_TARGET_CMDS
 	docker run --rm --privileged \
 		-v $(BINARIES_DIR):/export \
-		-v $(BR2_EXTERNAL_HASSOS_PATH)/apparmor:/apparmor \
 		hassos-hostapps \
 		--supervisor $(BR2_PACKAGE_HASSOS_SUPERVISOR) \
 		--supervisor-version $(BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION) \
 		--supervisor-args $(BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS) \
 		--supervisor-profile $(BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE) \
+		--supervisor-profile-url $(BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL) \
 		--cli $(BR2_PACKAGE_HASSOS_CLI) \
 		--cli-version $(BR2_PACKAGE_HASSOS_CLI_VERSION) \
 		--cli-args $(BR2_PACKAGE_HASSOS_CLI_ARGS) \
 		--cli-profile $(BR2_PACKAGE_HASSOS_CLI_PROFILE) \
+		--cli-profile-url $(BR2_PACKAGE_HASSOS_CLI_PROFILE_URL) \
 		--apparmor $(BR2_PACKAGE_HASSOS_APPARMOR_DIR)
 endef

--- a/buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf
+++ b/buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf
@@ -6,3 +6,6 @@ rc-manager=file

 [keyfile]
 unmanaged-devices=type:bridge;type:tun;type:veth
+
+[logging]
+backend=journal
--- a/buildroot-external/rootfs-overlay/etc/bluetooth/main.conf
+++ b/buildroot-external/rootfs-overlay/etc/bluetooth/main.conf
@@ -0,0 +1,2 @@
+[Policy]
+AutoEnable=true
--- a/buildroot-external/rootfs-overlay/etc/rauc/system.conf
+++ b/buildroot-external/rootfs-overlay/etc/rauc/system.conf
@@ -4,12 +4,16 @@ mountprefix=/run/rauc
 statusfile=/mnt/data/rauc.db
 bootloader=%BOOTLOADER%

+[handlers]
+pre-install=/usr/lib/rauc/pre-install
+post-install=/usr/lib/rauc/post-install
+
 [keyring]
 path=/etc/rauc/keyring.pem

 [slot.boot.0]
 device=/dev/disk/by-partlabel/hassos-boot
-type=vfs
+type=vfat

 [slot.kernel.0]
 device=/dev/disk/by-partlabel/hassos-kernel0
--- a/buildroot-external/rootfs-overlay/etc/resolv.conf
+++ b/buildroot-external/rootfs-overlay/etc/resolv.conf
@@ -1 +1 @@
-/run/NetworkManager/resolv.conf
+/run/resolv.conf
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/NetworkManager.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/NetworkManager.service.d/hassos.conf
@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/etc/hostname /etc/hosts /etc/NetworkManager/system-connections
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/hassos.conf
@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/etc/hostname
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/nm.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/nm.conf
@@ -0,0 +1,3 @@
+[Unit]
+Wants=network-online.target
+After=network-online.target
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/dropbear.service.d/docker.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/dropbear.service.d/docker.conf
@@ -0,0 +1,3 @@
+[Unit]
+Requires=docker.service
+After=docker.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/dropbear.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/dropbear.service.d/hassos.conf
@@ -1,5 +1,6 @@
 [Unit]
 RequiresMountsFor=/etc/dropbear
+ConditionFileNotEmpty=/root/.ssh/authorized_keys

 [Service]
 ExecStartPre=
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/getty@.service.d/docker.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/getty@.service.d/docker.conf
@@ -0,0 +1,3 @@
+[Unit]
+Requires=docker.service
+After=docker.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/getty@.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/getty@.service.d/hassos.conf
@@ -1,3 +1,3 @@
 [Unit]
-Requires=docker.service
-After=docker.service
+Wants=hassos-supervisor.service
+After=hassos-supervisor.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/root-.ssh.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/root-.ssh.mount
@@ -0,0 +1 @@
+/usr/lib/systemd/system/root-.ssh.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-NetworkManager.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-NetworkManager.mount
@@ -0,0 +1 @@
+/usr/lib/systemd/system/var-lib-NetworkManager.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-bluetooth.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-bluetooth.mount
@@ -0,0 +1 @@
+/usr/lib/systemd/system/var-lib-bluetooth.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-hardware.target.wants/.empty
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-hardware.target.wants/.empty
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-supervisor.service.d/rauc.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-supervisor.service.d/rauc.conf
@@ -1,2 +0,0 @@
-[Unit]
-OnFailure=rauc-bad.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/local-fs.target.wants/mnt-state.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/local-fs.target.wants/mnt-state.mount
@@ -1 +0,0 @@
-/usr/lib/systemd/system/mnt-state.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-apparmor.service
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-apparmor.service
@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-apparmor.service
+/usr/lib/systemd/system/hassos-apparmor.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-bind.target
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-bind.target
@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-bind.target
+/usr/lib/systemd/system/hassos-bind.target
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-config.service
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-config.service
@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-config.service
+/usr/lib/systemd/system/hassos-config.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-hardware.target
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-hardware.target
@@ -0,0 +1 @@
+/usr/lib/systemd/system/hassos-hardware.target
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-persists-journald.service
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-persists-journald.service
@@ -0,0 +1 @@
+/usr/lib/systemd/system/hassos-persists-journald.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-supervisor.service
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-supervisor.service
@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-supervisor.service
+/usr/lib/systemd/system/hassos-supervisor.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-zram.target
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-zram.target
@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-zram.target
+/usr/lib/systemd/system/hassos-zram.target
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/docker.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/docker.conf
@@ -0,0 +1,3 @@
+[Unit]
+Requires=docker.service
+After=docker.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/hassos.conf
@@ -1,3 +1,3 @@
 [Unit]
-Requires=docker.service
-After=docker.service
+Wants=hassos-supervisor.service
+After=hassos-supervisor.service
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/hassos.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/hassos.conf
@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/var/lib/systemd
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/ro.conf
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/ro.conf
@@ -0,0 +1,2 @@
+[Service]
+DynamicUser=no
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-good.timer
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-good.timer
@@ -1 +0,0 @@
-/usr/lib/systemd/system/rauc-good.timer
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-mark.timer
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-mark.timer
@@ -0,0 +1 @@
+/usr/lib/systemd/system/rauc-mark.timer
--- a/buildroot-external/rootfs-overlay/etc/tmpfiles.d/nm.conf
+++ b/buildroot-external/rootfs-overlay/etc/tmpfiles.d/nm.conf
@@ -0,0 +1,4 @@
+# Cleanup lease files
+e /var/lib/NetworkManager/*.lease - - - 14d
+C /mnt/overlay/etc/NetworkManager/system-connections - - - - /usr/share/system-connections
+f /run/resolv.conf - - - -
--- a/buildroot-external/rootfs-overlay/usr/lib/rauc/post-install
+++ b/buildroot-external/rootfs-overlay/usr/lib/rauc/post-install
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+systemctl start mnt-boot.mount
--- a/buildroot-external/rootfs-overlay/usr/lib/rauc/post-install-boot
+++ b/buildroot-external/rootfs-overlay/usr/lib/rauc/post-install-boot
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+BOOT_DATA=/tmp/boot-data
+
+cp -f ${BOOT_DATA}/*.txt ${RAUC_SLOT_MOUNT_POINT}/
+
+rm -rf ${BOOT_DATA}
--- a/buildroot-external/rootfs-overlay/usr/lib/rauc/pre-install
+++ b/buildroot-external/rootfs-overlay/usr/lib/rauc/pre-install
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+systemctl stop mnt-boot.mount
--- a/buildroot-external/rootfs-overlay/usr/lib/rauc/pre-install-boot
+++ b/buildroot-external/rootfs-overlay/usr/lib/rauc/pre-install-boot
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+BOOT_DATA=/tmp/boot-data
+
+rm -rf ${BOOT_DATA}
+mkdir -p ${BOOT_DATA}
+
+cp -f ${RAUC_SLOT_MOUNT_POINT}/*.txt ${BOOT_DATA}/
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-NetworkManager-system\x2dconnections.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-NetworkManager-system\x2dconnections.mount
@@ -1,7 +1,7 @@
 [Unit]
 Description=NetworkManager persistent system connections
 Requires=mnt-overlay.mount
-After=mnt-overlay.mount
+After=mnt-overlay.mount systemd-tmpfiles-setup.service
 Before=NetworkManager.service hassos-config.service

 [Mount]
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-expand.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-expand.service
@@ -2,6 +2,8 @@
 Description=HassOS data resizing
 DefaultDependencies=no
 Before=mnt-data.mount
+RefuseManualStart=true
+RefuseManualStop=true

 [Service]
 Type=oneshot
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-hardware.target
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-hardware.target
@@ -0,0 +1,3 @@
+[Unit]
+Description=HassOS hardware targets
+Documentation=man:systemd.target(5)
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-persists-journald.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-persists-journald.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=HassOS persists journald
+Requires=var-log-journal.mount
+After=sysinit.target systemd-journald.service
+RefuseManualStart=true
+RefuseManualStop=true
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/hassos-persists-journald
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-supervisor.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-supervisor.service
@@ -1,7 +1,8 @@
 [Unit]
 Description=HassOS supervisor
 Requires=docker.service
-After=docker.service dbus.socket
+Wants=network-online.target
+After=docker.service rauc.service dbus.socket network-online.target
 RequiresMountsFor=/mnt/data
 StartLimitIntervalSec=60
 StartLimitBurst=5
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/mnt-config.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/mnt-config.mount
@@ -0,0 +1,8 @@
+[Unit]
+Description=HassOS config partition
+
+[Mount]
+What=LABEL=CONFIG
+Where=/mnt/config
+Type=auto
+Options=ro
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-bad.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-bad.service
@@ -1,10 +0,0 @@
-[Unit]
-Description=HassOS rauc bad
-Requires=rauc.service
-RefuseManualStart=true
-RefuseManualStop=true
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/rauc status mark-bad
-ExecStartPost=/usr/bin/systemctl reboot
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.service
@@ -1,10 +1,9 @@
 [Unit]
 Description=HassOS rauc good 
-Requires=hassos-supervisor.service rauc.service
 RefuseManualStart=true
 RefuseManualStop=true

 [Service]
 Type=oneshot
-ExecStart=/usr/bin/rauc status mark-good
+ExecStart=/usr/sbin/hassos-rate
 RemainAfterExit=true
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.timer
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.timer
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-NetworkManager.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-NetworkManager.mount
@@ -0,0 +1,14 @@
+[Unit]
+Description=NetworkManager persistent data
+Requires=mnt-data.mount
+After=mnt-data.mount
+Before=NetworkManager.service
+
+[Mount]
+What=/mnt/overlay/var/lib/NetworkManager
+Where=/var/lib/NetworkManager
+Type=none
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-bluetooth.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-bluetooth.mount
@@ -0,0 +1,14 @@
+[Unit]
+Description=Bluetooth persistent state
+Requires=mnt-overlay.mount
+After=mnt-overlay.mount
+Before=bluetooth.service
+
+[Mount]
+What=/mnt/overlay/var/lib/bluetooth
+Where=/var/lib/bluetooth
+Type=None
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-docker.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-docker.mount
@@ -1,6 +1,6 @@
 [Unit]
 Description=Docker persistent data
-Requires=mnt-data.mount docker.service
+Requires=mnt-data.mount
 After=mnt-data.mount
 Before=docker.service

--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Pascal Vizeli	51882ad715	OS: Update supervisor 123	2018-08-03 23:02:04 +00:00
Pascal Vizeli	20004ca451	OS: Bump version 1.9	2018-08-03 12:32:07 +00:00
Pascal Vizeli	ac0d1ed9af	rpi: Update kernel & firmware 4.14.58 (#139 )	2018-08-03 12:31:33 +00:00
Pascal Vizeli	2e9f5d04e2	OVA: Update kernel to 4.14.59 (#138 )	2018-08-03 12:31:14 +00:00
Pascal Vizeli	0ecf4cb293	OVA: Add support for Aeotec Zstick (#132 )	2018-08-03 12:30:59 +00:00
Pascal Vizeli	02126e0236	OS: Update supervisor 122	2018-08-03 12:30:41 +00:00
Pascal Vizeli	59cb3b4844	fix wireless settings (#124 )	2018-07-19 08:53:46 +00:00
Pascal Vizeli	ee6399a8ba	OVA: Fix serial support (#119 ) OVA: Fix serial support	2018-07-18 14:07:34 +00:00
Pascal Vizeli	1541fcab8d	Bump version 1.8	2018-07-18 12:54:21 +00:00
Pascal Vizeli	93dcc4a152	Add support for VIRTIO (#118 ) * Add support for VIRTIO * Update kernel.config	2018-07-18 12:43:19 +00:00
Pascal Vizeli	54dd3e3219	Allow more USB serial device on OVA (#115 ) * Allow more USB serial device on OVA * Update kernel.config	2018-07-18 12:43:05 +00:00
Robin	dca52c3026	Update network.md (#114 ) Clarify that you are editing the file `my-network` which is what I understand from https://www.home-assistant.io/hassio/installation/	2018-07-18 12:42:00 +00:00
Pascal Vizeli	bfcbe120b4	Bump version 1.7	2018-07-15 19:43:44 +00:00
Pascal Vizeli	38a3af6a8d	Fix prevent device tree on rpi (#107 ) * Fix prevent device tree * Update uboot-boot.sh * Update rauc-hook * Update rauc-hook	2018-07-15 19:43:18 +00:00
Pascal Vizeli	ed8f2489e0	Update OVA kernel to 4.14.55 (#108 )	2018-07-15 19:43:04 +00:00
Pascal Vizeli	fa05217ef2	Raspberry Pi node of 64bit (#103 )	2018-07-14 09:09:15 +00:00
DubhAd	f85402d781	Grammar and language tweaks (#101 ) Some grammar and language tweaks	2018-07-14 09:09:05 +00:00
Pascal Vizeli	7e3f9d53b0	Bump version 1.6	2018-07-13 16:31:56 +00:00
Pascal Vizeli	e8f80669d7	Fix handling with resolv.conf (#99 )	2018-07-13 16:31:32 +00:00
Pascal Vizeli	9113d711f2	Update rpi kernel 4.14.54 / Firmware / wifi (#98 ) * Update rpi kernel 4.14.54 / Firmware / wifi Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix patch * Update bluetooth-bcm43xx.mk * Update bluetooth-bcm43xx.mk * Update bluetooth-bcm43xx.mk	2018-07-13 16:31:11 +00:00
Pascal Vizeli	ac2cd55e37	Update Documentation (#95 ) * Update deployment.md * Update raspberrypi.md * Update raspberrypi.md * Update raspberrypi.md	2018-07-12 10:57:56 +00:00
Pascal Vizeli	0002d570d7	Fix boot menu (#94 ) * Fix boot menu * Update action	2018-07-10 12:57:22 +00:00
Pascal Vizeli	0a018c6c45	Bump version 1.5	2018-07-10 08:22:03 +00:00
Pascal Vizeli	173596eec5	Update bluetooth docs & add udev rules (#92 ) * Update bluetooth docs * add udev rules * Add cmp to build * Create bluetooth.md	2018-07-10 08:20:30 +00:00
Pascal Vizeli	bf69f2e974	Native bluetooth support (#91 ) * Add bluez * rpi firmware * add rpi support * Make packages from rpi * Fix build * Fix target * persistent * fix package * Auto enable * Fix parameter * Fix rpi * Fix done	2018-07-10 08:20:21 +00:00
Pascal Vizeli	6ddf29045e	Check simlink (#90 )	2018-07-08 12:20:28 +00:00
Pascal Vizeli	2d8aba9b37	Bump verison 1.4	2018-07-07 22:45:33 +00:00
Pascal Vizeli	aa7858ae44	Fix time on overlay (#88 ) * Fix time on overlay * Fix rights * Fix timesync	2018-07-07 22:45:00 +00:00
Pascal Vizeli	0b05afb194	Add powersave config to network manager (#86 ) * Add powersave config to network manager * Update network.md	2018-07-07 08:46:47 +00:00
Pascal Vizeli	ab60a8bc55	Bump version to 1.3 / production	2018-07-06 21:58:06 +00:00
Pascal Vizeli	450826b6bd	Some cleanup (#84 )	2018-07-06 21:54:38 +00:00
Pascal Vizeli	14f406ad6a	Reset if we can't boot (#83 ) * Update uboot-boot.sh * Update uboot-boot.sh	2018-07-06 21:54:17 +00:00
Pascal Vizeli	1d74fcb91d	Use wait on network to delay the startup (#81 ) * Use wait on network to delay the startup * Update nm.conf * Create nm.conf * Update hassos-supervisor.service * Rename hassos.conf to docker.conf * Create hassos.conf * Create hassos.conf * Update hassos.conf * aply patch * Mark only failed * Fix start order	2018-07-06 21:53:58 +00:00
Pascal Vizeli	13d0aaac0e	Update supervisor 115 (#82 )	2018-07-06 21:53:43 +00:00
Pascal Vizeli	1e1f36f275	Update CLI / Supervisor (#71 )	2018-07-06 21:53:37 +00:00
Pascal Vizeli	36251114d8	Use dhcp client / avahi after NM (#75 ) * Use dhcp client / avahi after NM * Store networkmanager * Add default connection * cleanup * cleanup lease * faster boot * Cleanup * Fix permission	2018-07-06 21:51:41 +00:00
Gabriel Oliveira	5e10559144	Fix config documentation closing tags (#80 )	2018-07-06 21:51:25 +00:00
Pascal Vizeli	0e7f516730	Fix /usr/sbin/hassos-cli is not in /etc/shells (#78 ) * Update rootfs-layer.sh * Update rootfs-layer.sh * Update rootfs-layer.sh	2018-07-06 21:51:07 +00:00
cogneato	b75fc91f8b	Update configuration.md (#50 ) * Update configuration.md Clearing up documentation, grammar fixes. * changed known_hosts to authorized_keys * Update configuration.md	2018-07-03 06:02:40 +00:00
cogneato	1b4d33d37d	Update network.md (#51 ) * Update network.md Clearing up network documentation, grammar * Update network.md	2018-07-03 06:02:35 +00:00
Pascal Vizeli	6fdd892aaf	Fix persistent log (#70 )	2018-07-02 22:01:35 +00:00
Pascal Vizeli	90dc5b54c0	Change chmod of network connection files from fat32 (#69 )	2018-07-02 21:04:01 +00:00
Pascal Vizeli	5b68cf097a	Fix update script with uptime (#68 )	2018-07-02 20:52:33 +00:00
Pascal Vizeli	b50df06358	Bump version 1.2	2018-07-02 21:54:41 +02:00
Pascal Vizeli	84500a88d1	Fix docker warning on rpi (#67 )	2018-07-02 19:53:12 +00:00
Pascal Vizeli	854202a1b8	Fix label name in test script (#66 ) * Fix label name in test script * Update hassos-config	2018-07-02 19:53:03 +00:00
Pascal Vizeli	e51a0811a1	Fix spell in journald script (#65 )	2018-07-02 19:52:52 +00:00
Pascal Vizeli	15fc1f447e	Make logs persistent over reboot and cleanup (#61 ) * Create hassos-persists-journald * Create hassos-persists-journald.service * Set ln & permission * Enable persists journald * Update hassos-persists-journald	2018-07-02 19:52:40 +00:00
Pascal Vizeli	26b5f910b5	Map /etc/machine-id into supervisor/cli (#60 ) * Map /etc/machine-id into supervisor/cli * Update hassos-cli * Update hassos-supervisor	2018-07-02 19:52:30 +00:00
Pascal Vizeli	5cc352bb44	Add lost persistent ssh folder (#58 ) Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-30 22:40:45 +00:00
Pascal Vizeli	3315f6d9c4	Use wpa_supplicant with NetworkManager (#57 )	2018-06-30 22:40:32 +00:00
Pascal Vizeli	0f1c8dbf56	Use CONFIG as label for config partition (#56 ) * Use CONFIG as label for config partition * Update configuration.md * Update hassos-config	2018-06-30 22:40:21 +00:00
Pascal Vizeli	f5df6e18a8	Bump version to REL-1 build 1	2018-06-30 10:00:49 +00:00
Pascal Vizeli	ba78c80b97	Set hassos supervisor to rauc (#55 ) * Set hassos supervisor to rauc * Update post-install * Update hassos-config	2018-06-30 09:59:46 +00:00
Pascal Vizeli	38bc2b4f91	Fix authorized_keys keys (#53 ) * Fix authorized_keys keys * Update hassos.conf * Update configuration.md * Update hassos-config * Update hassos-config	2018-06-30 09:59:36 +00:00
Pascal Vizeli	69af4b3819	Fix hassos-conf label (#48 ) * Update mnt-config.mount * Update configuration.md * Update configuration.md * Update mnt-config.mount * Update configuration.md	2018-06-30 09:59:24 +00:00
Pascal Vizeli	14de047663	Update ova.md (#47 )	2018-06-27 11:57:23 +00:00
Pascal Vizeli	a310232e2c	We publish now the vmdk and not OVA/OVF (#46 ) * Update upload-rel.sh * Create ova.md	2018-06-27 11:36:09 +00:00
Pascal Vizeli	93ea56d0ea	Improve the documentation (#44 ) * Create network.md * Update configuration.md * Update network.md * Update network.md	2018-06-26 20:25:56 +00:00
Pascal Vizeli	83dabb2842	Add script for github upload (#43 ) Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-26 20:25:48 +00:00
Pascal Vizeli	bf05e66ae8	Include ota script into board image (#42 )	2018-06-26 11:29:05 +00:00
Pascal Vizeli	e1fb61e8a8	Fix build script for new layout (#40 )	2018-06-26 11:28:53 +00:00
Pascal Vizeli	480c11535d	Bump version (#39 )	2018-06-26 10:34:30 +02:00
Pascal Vizeli	b731b422fe	Merge pull request #38 from home-assistant/dev Release 0.7 beta	2018-06-26 10:20:24 +02:00
Pascal Vizeli	27cd425f5b	Use systemd for config mount (#37 ) * Create mnt-config.mount * Update hassos-config * Update mnt-config.mount * Update hassos-config	2018-06-26 10:18:16 +02:00
Pascal Vizeli	42f1c4bf01	cleanup avahi Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-25 22:11:59 +00:00
Pascal Vizeli	b3943870dc	Fix rauc config	2018-06-25 21:11:18 +00:00
Pascal Vizeli	4b4e22c355	Fix args	2018-06-25 19:22:15 +00:00
Pascal Vizeli	7675cc61fb	Update Hass.io CLI to version 5 (#36 )	2018-06-25 20:36:30 +02:00
Pascal Vizeli	11b1867c73	Create build.md	2018-06-25 09:00:31 +02:00
Pascal Vizeli	5cd03d19dd	Update README.md	2018-06-25 08:59:43 +02:00
Pascal Vizeli	26d7a4cb23	Update hassos.conf	2018-06-25 08:58:26 +02:00
Pascal Vizeli	cc80265997	Run dropbear only if they have a known_hosts	2018-06-25 08:55:16 +02:00
Pascal Vizeli	8434f3ee55	Create docker.conf	2018-06-25 08:51:22 +02:00
Pascal Vizeli	ddde16216c	Rename hassos.conf to docker.conf	2018-06-25 08:50:39 +02:00
Pascal Vizeli	3e8499ecbf	Use correct cert (#35 ) * Use correct cert * Fix boot partition handling * Cleanup rauc handling * Make a reboot * handling	2018-06-24 23:41:04 +02:00
Pascal Vizeli	42dc915436	Create deployment.md	2018-06-24 10:41:05 +02:00
Pascal Vizeli	17ca2ccf0a	Create OTA updater (#34 ) * Create OTA updater * Create .gitignore * Update build-all.sh * Update hdd-image.sh * Update ota.sh * Update ota.sh * Update ota.sh * Update ota.sh * Update post-image.sh * Create name.sh * Update name.sh * Update post-build.sh * Update name.sh * Update post-image.sh * Update ota.sh * Update hdd-image.sh * Update post-image.sh * Update name.sh * Update ota.sh * Update post-image.sh * Update hdd-image.sh * Update hdd-image.sh * Update hdd-image.sh * Update post-image.sh * Update post-image.sh * Update hdd-image.sh * Update hdd-image.sh * Update post-image.sh * Update post-image.sh * Update post-image.sh * Update info * Update info * Update info * Update info * Update info * Update info * Rename buildroot-external/board/raspberrypi/uboot-boot64.sh to buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh * Update rpi3_64_defconfig * Update hdd-image.sh * Update ota.sh * Update post-image.sh * Update post-image.sh * Fix building Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix building v2 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-24 00:11:54 +02:00
Pascal Vizeli	1e30f5120c	Update configuration.md	2018-06-21 15:50:01 +02:00
Pascal Vizeli	e30e15dc53	fix rauc name	2018-06-21 15:49:37 +02:00
Pascal Vizeli	3aaadf3f5f	Update supervisor 108	2018-06-21 11:37:10 +00:00
Pascal Vizeli	161c8624e0	Bump version to 0.7	2018-06-21 11:17:23 +02:00
Pascal Vizeli	56afd74720	Don't install kernel to rootfs	2018-06-21 09:15:28 +00:00
Pascal Vizeli	ed5a5033dd	Use apparmor from s3	2018-06-20 13:28:30 +00:00
Pascal Vizeli	2abbbbd1fa	Cleanup uboot handling like linux kernel	2018-06-20 10:41:45 +00:00
Pascal Vizeli	fa44e0a7fd	cleanup	2018-06-17 01:25:47 +02:00
Pascal Vizeli	1a3d063fec	Reboot after mark partition as bad	2018-06-16 22:24:36 +02:00
Pascal Vizeli	49df049f2c	Change rauc mark handling	2018-06-16 09:06:07 +00:00
Pascal Vizeli	c657f6f3e7	Ignore debug stack usage	2018-06-16 01:27:34 +02:00
Pascal Vizeli	0a43cbdb05	Update hassio-supervisor	2018-06-14 16:44:40 +02:00
Pascal Vizeli	45274411e7	Merge pull request #31 from home-assistant/dev Release 0.6	2018-06-14 15:43:10 +02:00
Pascal Vizeli	d5ff3596b1	Fix build script v2 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-14 13:10:32 +00:00
Pascal Vizeli	95f82aa75d	Fix build script Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-14 05:15:10 +00:00
Pascal Vizeli	fc4de4f02a	Fix 64bit Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-14 00:13:35 +00:00
Pascal Vizeli	eae3659909	Add Builder script Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-13 19:28:05 +00:00
Pascal Vizeli	6a05718235	Fix expander on SD cards Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-13 19:12:57 +00:00
Pascal Vizeli	5055236725	Bump version	2018-06-13 17:04:33 +02:00
Pascal Vizeli	ac40e97670	Update hassio-supervisor	2018-06-12 23:23:33 +02:00
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/var-lib-NetworkManager.mount`
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/var-lib-bluetooth.mount`
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/hassos-hardware.target`
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/hassos-persists-journald.service`