OVA: update kernel 4.14.82

Raspberry: update kernel 4.14.81
Supervisor: Update to version 140
2025-08-31 07:40:19 +00:00 · 2018-11-21 10:16:55 +00:00 · 2018-11-21 10:16:40 +00:00 · 2018-11-21 10:00:09 +00:00 · 2018-11-21 09:58:57 +00:00 · 2018-11-21 09:58:23 +00:00
29 changed files with 186 additions and 60 deletions
--- a/Documentation/configuration.md
+++ b/Documentation/configuration.md
@@ -2,19 +2,23 @@

 ## Automatic

-You can use a USB drive with HassOS to configure network options, ssh access to the host, and to install updates.
-Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Use the following directory structure within the USB drive:
+You can use an USB drive with HassOS to configure network options, SSH access to the host and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Alternative you can create a `CONFIG` folder inside boot partition. Use the following directory structure within the USB drive:

 ```
 network/
 modules/
+udev/
 authorized_keys
+timesyncd.conf
 hassos-xy.raucb
 ```

 - The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
 - The `modules` folder is for modules-load configuration files.
+- The `udev` folder is for udev rules files.
 - The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
 - The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 

 You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
@@ -30,6 +34,10 @@ You can edit or create a `cmdline.txt` into your boot partition. That will be re

 The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].

+### Udev rules
+
+The udev rules folder `/etc/udev/rules.d` is persistent and you can add your configuration files there.
+
 ### Network

 You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -0,0 +1,7 @@
+
+# Kernel Version
+
+| Board | Version |
+|-------|---------|
+| Open Virtual Applicance | 4.14.82 |
+| Raspberry Pi | 4.14.81 |
--- a/Documentation/network.md
+++ b/Documentation/network.md
@@ -4,7 +4,7 @@ HassOS uses NetworkManager to control the host network. In future releases, you

 ## Configuration Examples

-You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid].
+You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid]. Inside the `network` folder create the file `my-network` and add the appropriate contents below:

 ### Default

@@ -45,11 +45,11 @@ id=hassos-network
 uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
 type=802-11-wireless

-[wifi]
+[802-11-wireless]
 mode=infrastructure
 ssid=MY_SSID

-[wifi-security]
+[802-11-wireless-security]
 auth-alg=open
 key-mgmt=wpa-psk
 psk=MY_WLAN_SECRED_KEY
--- a/buildroot-external/board/ova/kernel.config
+++ b/buildroot-external/board/ova/kernel.config
@@ -1 +1,18 @@
-CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB=y
+
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_ACM=m
+
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=m
+CONFIG_VIRTIO_BLK=m
+
+CONFIG_USB_XHCI_HCD=y
--- a/buildroot-external/board/raspberrypi/kernel.config
+++ b/buildroot-external/board/raspberrypi/kernel.config
@@ -0,0 +1 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
--- a/buildroot-external/bootloader/barebox/boot/system0
+++ b/buildroot-external/bootloader/barebox/boot/system0
@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"

 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel0 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel0 /mnt/system

 global bootm.image="/mnt/system/bzImage"
--- a/buildroot-external/bootloader/barebox/boot/system1
+++ b/buildroot-external/bootloader/barebox/boot/system1
@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"

 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel1 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel1 /mnt/system

 global bootm.image="/mnt/system/bzImage"
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova/post-image.s
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.55"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.82"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -77,12 +77,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi0_w_defconfig
+++ b/buildroot-external/configs/rpi0_w_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi2_defconfig
+++ b/buildroot-external/configs/rpi2_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
@@ -85,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_64_defconfig
+++ b/buildroot-external/configs/rpi3_64_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2837-rpi-3-b broadcom/bcm2710-rpi-3-b-plus"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi3_defconfig
+++ b/buildroot-external/configs/rpi3_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
@@ -86,12 +86,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/configs/rpi_defconfig
+++ b/buildroot-external/configs/rpi_defconfig
@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db81c14ce9fbd705c2d3936edecbc6036ace6c05"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="f6878de4d2818c2256b2a340eaeeabfb0b24c71b"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
@@ -85,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="115"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="140"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="6"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
--- a/buildroot-external/info
+++ b/buildroot-external/info
@@ -1,5 +1,5 @@
 VERSION_MAJOR=1
-VERSION_BUILD=7
+VERSION_BUILD=13

 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk
@@ -24,8 +24,8 @@ define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS
 	$(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm
 	$(INSTALL) -m 0644 $(@D)/*.hcd $(TARGET_DIR)/lib/firmware/brcm/

-	$(INSTALL) -d $(TARGET_DIR)/etc/udev/rules.d
-	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.rules $(TARGET_DIR)/etc/udev/rules.d/
+	$(INSTALL) -d $(TARGET_DIR)/usr/lib/udev/rules.d
+	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.rules $(TARGET_DIR)/usr/lib/udev/rules.d/
 endef

 $(eval $(generic-package))
--- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service
+++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service
@@ -2,7 +2,7 @@
 Description=Bluetooth for BCM43xx
 Before=bluetooth.service
 After=dev-ttyAMA0.device
-ConditionPathIsDirectory=/proc/device-tree/soc/gpio@7e200000/bt_pins
+ConditionFileNotEmpty=/proc/device-tree/soc/gpio@7e200000/bt_pins/brcm,pins

 [Service]
 Type=forking
--- a/buildroot-external/rootfs-overlay/etc/acpi/PWRF/00000080
+++ b/buildroot-external/rootfs-overlay/etc/acpi/PWRF/00000080
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# This script is exec()d by acpid when an ACPI event signals the power button
+# to have been pressed.
+
+echo "System power button was pressed - shutting down..."
+exec /bin/systemctl poweroff
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/etc-systemd-timesyncd.conf.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/etc-systemd-timesyncd.conf.mount
@@ -0,0 +1 @@
+/usr/lib/systemd/system/etc-systemd-timesyncd.conf.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/etc-udev-rules.d.mount
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/etc-udev-rules.d.mount
@@ -0,0 +1 @@
+/usr/lib/systemd/system/etc-udev-rules.d.mount
--- a/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/busybox-acpid.service
+++ b/buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/busybox-acpid.service
@@ -0,0 +1 @@
+/usr/lib/systemd/system/busybox-acpid.service
--- a/buildroot-external/rootfs-overlay/etc/tmpfiles.d/timesyncd.conf
+++ b/buildroot-external/rootfs-overlay/etc/tmpfiles.d/timesyncd.conf
@@ -0,0 +1 @@
+C /mnt/overlay/etc/systemd/timesyncd.conf - - - - /etc/systemd/timesyncd.conf
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/busybox-acpid.service
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/busybox-acpid.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=acpid (busybox)
+RefuseManualStop=true
+After=sysinit.target
+ConditionPathIsDirectory=/proc/acpi
+
+[Service]
+Type=simple
+ExecStart=/sbin/acpid -d
+
+[Install]
+WantedBy=multi-user.target
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-systemd-timesyncd.conf.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-systemd-timesyncd.conf.mount
@@ -0,0 +1,14 @@
+[Unit]
+Description=Timesyncd persistent configuration
+Requires=mnt-overlay.mount
+After=mnt-overlay.mount systemd-tmpfiles-setup.service
+Before=systemd-timesyncd.service
+
+[Mount]
+What=/mnt/overlay/etc/systemd/timesyncd.conf
+Where=/etc/systemd/timesyncd.conf
+Type=none
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target
--- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-udev-rules.d.mount
+++ b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-udev-rules.d.mount
@@ -0,0 +1,14 @@
+[Unit]
+Description=Udev persistent rules.d
+Requires=mnt-overlay.mount
+After=mnt-overlay.mount
+Before=systemd-udevd.service hassos-config.service
+
+[Mount]
+What=/mnt/overlay/etc/udev/rules.d
+Where=/etc/udev/rules.d
+Type=None
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target
--- a/buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/hmip-rfusb.rules
+++ b/buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/hmip-rfusb.rules
@@ -0,0 +1 @@
+ACTION=="add", ATTRS{idVendor}=="1b1f", ATTRS{idProduct}=="c020", RUN+="/sbin/modprobe cp210x" RUN+="/bin/sh -c 'echo 1b1f c020 >/sys/bus/usb-serial/drivers/cp210x/new_id'"
--- a/buildroot-external/rootfs-overlay/usr/sbin/hassos-config
+++ b/buildroot-external/rootfs-overlay/usr/sbin/hassos-config
@@ -1,60 +1,97 @@
 #!/bin/sh

-if ! findfs LABEL="CONFIG" > /dev/null; then
+BOOT_CONFIG="/mnt/boot/CONFIG"
+USB_CONFIG="/mnt/config"
+CONFIG_DIR=""
+USE_USB=0
+
+# Check and mount usb CONFIG to folder
+if findfs LABEL="CONFIG" > /dev/null 2>&1; then
+    echo "[Info] Use USB stick for import CONFIG"
+
+    systemctl start mnt-config.mount
+    if ! systemctl -q is-active mnt-config.mount; then
+        echo "[Error] Can't mount config partition"
+        exit 1
+    fi
+
+    USE_USB=1
+    CONFIG_DIR=${USB_CONFIG}
+fi
+
+# Use boot CONFIG folder
+if [ ${USE_USB} = 0 ] && [ -d ${BOOT_CONFIG} ]; then
+    echo "[Info] Use boot partition for import CONFIG"
+    CONFIG_DIR=${BOOT_CONFIG}
+elif [ ${USE_USB} = 0 ]; then
    echo "[Warning] No config partition found"
    exit 0
 fi

-# Mount config folder
-systemctl start mnt-config.mount
-if ! systemctl -q is-active mnt-config.mount; then
-    echo "[Error] Can't mount config partition"
-    exit 1
-fi

 ##
 # NetworkManager
-if [ -d /mnt/config/network ]; then
+if [ -d "${CONFIG_DIR}/network" ]; then
    echo "[Info] Update NetworkManager connections!"

    rm -rf /etc/NetworkManager/system-connections/*
-    cp -f /mnt/config/network/* /etc/NetworkManager/system-connections/
+    cp -f ${CONFIG_DIR}/network/* /etc/NetworkManager/system-connections/
    chmod 600 /etc/NetworkManager/system-connections/*

-    nmcli con reload
+    nmcli con reload > /dev/null 2>&1
 fi

 ##
 # Modules
-if [ -d /mnt/config/modules ]; then
+if [ -d "${CONFIG_DIR}/modules" ]; then
    echo "[Info] Update Modules configuration!"

    rm -rf /etc/modules-load.d/*
-    cp -f /mnt/config/modules/* /etc/modules-load.d/*
+    cp -f ${CONFIG_DIR}/modules/* /etc/modules-load.d/*
+fi
+
+##
+# Udev
+if [ -d "${CONFIG_DIR}/udev" ]; then
+    echo "[Info] Update Udev configuration!"
+
+    rm -rf /etc/udev/rules.d/*
+    cp -f ${CONFIG_DIR}/udev/* /etc/udev/rules.d/
 fi

 ##
 # SSH know hosts
-if [ -f /mnt/config/authorized_keys ]; then
+if [ -f "${CONFIG_DIR}/authorized_keys" ]; then
    echo "[Info] Update SSH authorized_keys!"

-    cp -f /mnt/config/authorized_keys /root/.ssh/authorized_keys
+    cp -f ${CONFIG_DIR}/authorized_keys /root/.ssh/authorized_keys
    chmod 600 /root/.ssh/authorized_keys

-    systemctl start dropbear
+    systemctl start dropbear > /dev/null 2>&1
 else
+    echo "[Info] Stop SSH debug access"
+
    rm -f /root/.ssh/authorized_keys
-    systemctl stop dropbear
+    systemctl stop dropbear > /dev/null 2>&1
 fi

 ##
-# Firmware update
+# timesyncd
+if [ -f "${CONFIG_DIR}/timesyncd.conf" ]; then
+    echo "[Info] Update timesyncd config"
+
+    cat "${CONFIG_DIR}/timesyncd.conf" > /etc/systemd/timesyncd.conf
+    systemctl restart systemd-timesyncd.service > /dev/null 2>&1
+fi
+
+##
+# Firmware update / Only USB
 UPTIME=$(awk '{printf "%0.f", $1}' /proc/uptime)
-if ls /mnt/config/*.raucb > /dev/null && [ ${UPTIME} -ge 180 ]; then
+if ls ${USB_CONFIG}/*.raucb > /dev/null 2>&1 && [ ${UPTIME} -ge 180 ]; then
    echo "[Info] Performe a firmware update"

-    rauc_filename=$(ls /mnt/config/*.raucb | head -n 1)
-    if rauc install ${rauc_filename}; then
+    rauc_filename=$(ls ${USB_CONFIG}/*.raucb | head -n 1)
+    if rauc install "${rauc_filename}"; then
        echo "[Info] Firmware update success"
        systemctl reboot
    else
@@ -63,4 +100,8 @@ if ls /mnt/config/*.raucb > /dev/null && [ ${UPTIME} -ge 180 ]; then
 fi

 # Cleanup config partition
-systemctl stop mnt-config.mount
+if [ ${USE_USB} = 1 ]; then
+    systemctl stop mnt-config.mount
+else
+    rm -rf ${BOOT_CONFIG}
+fi
--- a/buildroot-patches/0006-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
+++ b/buildroot-patches/0006-Pump-raspberry-pi-firmware-for-kernel-4.14.patch
@@ -16,7 +16,7 @@ index 4854deae03..3a9f21e877 100644
@@ -1,2 +1,2 @@
 # Locally computed
 -sha256 ea451834e20136d249661e0ed7d1fdfa309249d233a387f44dd6c3b746a454c6 rpi-firmware-36f991382326907419f64917624427e59fd8e4a0.tar.gz
-+sha256 25c04d9e5b0d9dfe3145784c983460b6e47f370c2082ced45392882d55932b8a rpi-firmware-418b77e24476a98aba4ee33942cc5321e6698ce4.tar.gz
+sha256 8939476badeb1d28adc60b46315f1511cd83c1942fbde5ef2e04c4f1b9591da6 rpi-firmware-91e955e3786a807f4af8ae7e4a4bbf9ec470b843.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index eab4c5d307..cb2e9d6cd8 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -26,7 +26,7 @@ index eab4c5d307..cb2e9d6cd8 100644
 ################################################################################
 
 -RPI_FIRMWARE_VERSION = 36f991382326907419f64917624427e59fd8e4a0
-+RPI_FIRMWARE_VERSION = 418b77e24476a98aba4ee33942cc5321e6698ce4
+RPI_FIRMWARE_VERSION = 91e955e3786a807f4af8ae7e4a4bbf9ec470b843
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--- a/buildroot/package/rpi-firmware/rpi-firmware.hash
+++ b/buildroot/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256 25c04d9e5b0d9dfe3145784c983460b6e47f370c2082ced45392882d55932b8a rpi-firmware-418b77e24476a98aba4ee33942cc5321e6698ce4.tar.gz
+sha256 8939476badeb1d28adc60b46315f1511cd83c1942fbde5ef2e04c4f1b9591da6 rpi-firmware-91e955e3786a807f4af8ae7e4a4bbf9ec470b843.tar.gz
--- a/buildroot/package/rpi-firmware/rpi-firmware.mk
+++ b/buildroot/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################

-RPI_FIRMWARE_VERSION = 418b77e24476a98aba4ee33942cc5321e6698ce4
+RPI_FIRMWARE_VERSION = 91e955e3786a807f4af8ae7e4a4bbf9ec470b843
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
Author	SHA1	Message	Date
Pascal Vizeli	9ccb9c675d	OVA: update kernel 4.14.82	2018-11-21 10:16:55 +00:00
Pascal Vizeli	79cfb2ecf6	Raspberry: update kernel 4.14.81	2018-11-21 10:16:40 +00:00
Pascal Vizeli	b89f71888e	Supervisor: Update to version 140	2018-11-21 10:00:09 +00:00
Pascal Vizeli	4ba61a1aaf	OS: allow set NTP (#252 ) * OS: allow set NTP * Create etc-systemd-timesyncd.conf.mount * Update hassos-config * Update configuration.md * add link * Update Documentation/configuration.md Co-Authored-By: pvizeli <pascal.vizeli@syshack.ch>	2018-11-21 09:58:57 +00:00
Pascal Vizeli	bac8e95423	Raspberry: Bugfix not try to load Bluetooth (#235 )	2018-11-21 09:58:23 +00:00
Simon Holzmayer	66f3ca0ad1	Fixed keeping name of udev rules after usb import (#232 ) Closes #231	2018-11-21 09:58:02 +00:00
Pascal Vizeli	8c31882465	OS: bugfix acpid service file (#229 ) * OS: bugfix acpid service file * Update busybox-acpid.service	2018-11-21 09:57:51 +00:00
Pascal Vizeli	252c9e6507	OS: Bump version 1.13	2018-11-21 10:56:10 +01:00
Pascal Vizeli	43c27363f9	Raspberry: update kernel 4.14.78	2018-10-27 13:10:27 +00:00
Pascal Vizeli	26377dcde3	OVA: update kernel 4.14.78	2018-10-27 13:08:33 +00:00
Pascal Vizeli	237a9055f1	Supervisor: Update to version 138	2018-10-26 10:28:01 +00:00
Pascal Vizeli	ea01a2e5ae	OS: bump version 1.12	2018-10-26 10:26:58 +00:00
Pascal Vizeli	e297324a0d	OS: Config importer support now also boot partition (#212 ) * OS: Config importer support now also boot partition * Update configuration.md * Cleanup config after import * Update hassos-config	2018-10-26 10:25:32 +00:00
Johannes Truschnigg	295a05e5a0	Enable XHCI (USB3) support in ova kernel config (#221 ) With this change, hassos can have USB devices passed into a guest VM with the hypervisor emulating an XHCI controller. QEMU recommends using XHCI whenever possible, as it offers a much more virtualization-friendly architecture than its [EO]HCI predecessors (which are already support by the hassos kernel).	2018-10-26 10:24:04 +00:00
Pascal Vizeli	398b684d8d	Allow udev rules & make it persistent (#210 ) * Install default to lib * Create hmip-rfusb.rules * Create etc-udev-rules.d.mount * Update hassos-config * Update configuration.md * Update rauc.sh * Add ln	2018-10-26 10:22:45 +00:00
Johannes Truschnigg	8ffcd3efb9	Implement basic ACPI shutdown support via busybox acpid (#209 ) On systems where ACPI support is present as inidcated by the presence of /proc/acpi (e.g. on OVA compatible hypervisors), we want to properly shut down the system when the power button is pressed (or the hypervisor simulates this kind of event to the guest machine that executes hassos). This changeset provides the following basic infrastructure for this feature to work as expected: * a systemd service to start acpid, if ACPI support can be assumed * an acpid configuration directory * a trivial shutdown script to invoke when a PWR event is registered	2018-10-26 10:16:16 +00:00
Pascal Vizeli	9af71ce9ea	CLI: Update to version 7	2018-09-24 14:32:23 +00:00
Pascal Vizeli	e3432c373f	Supervisor: Update to version 131	2018-09-24 14:31:54 +00:00
Pascal Vizeli	569a581445	Raspberry: Fix power issue	2018-09-24 16:30:35 +02:00
Pascal Vizeli	92dbff76e1	OS: bump version 1.11	2018-09-10 10:27:08 +00:00
Johannes Truschnigg	3ab6dd4cfe	Do not assume index 0 for boot medium (#188 ) When booting the HassOS VMDK appliance disk image on QEMU with OVMF UEFI firmware, barebox numbers devices differently from other environments. This patch makes the barebox `sh` implementation expand a pathname wildcard at runtime, so that assigned disk indices != 0 will also work. This fix introduces a potential (but most likely irrelevant) bug/problem: If there is more than one disk connected to the system with a matching name assigned, the wildcard will expand to two or more pathnames, breaking the resulting `mount` command.	2018-09-10 10:25:22 +00:00
Pascal Vizeli	a0b432e072	Supervisor: Update to version 130	2018-09-10 10:24:57 +00:00
Pascal Vizeli	4fd8594af5	Raspberrypi: Performance on Raspberry Pi due to governor (#194 ) * Raspberrypi: Performance on Raspberry Pi due to governor * Update rpi0_w_defconfig * Update rpi2_defconfig * Update rpi3_64_defconfig * Update rpi3_defconfig * Update rpi_defconfig	2018-09-10 12:22:33 +02:00
Pascal Vizeli	115dbd0491	OS: bump version 1.10	2018-08-27 16:00:21 +00:00
Pascal Vizeli	6fdd9afe74	Documentation: Update Kernel infos	2018-08-27 15:59:47 +00:00
Pascal Vizeli	523996658b	OVA: update kernel 4.14.67	2018-08-27 15:59:08 +00:00
Pascal Vizeli	6800ee84dc	Raspberry: update kernel 4.14.66	2018-08-27 15:58:52 +00:00
Pascal Vizeli	d36d3557cb	Raspberry: Bump Firmware for 4.14.66	2018-08-27 15:58:28 +00:00
Pascal Vizeli	b87b4f240a	Supervisor: Update to version 127	2018-08-27 15:57:58 +00:00
Pascal Vizeli	51882ad715	OS: Update supervisor 123	2018-08-03 23:02:04 +00:00
Pascal Vizeli	20004ca451	OS: Bump version 1.9	2018-08-03 12:32:07 +00:00
Pascal Vizeli	ac0d1ed9af	rpi: Update kernel & firmware 4.14.58 (#139 )	2018-08-03 12:31:33 +00:00
Pascal Vizeli	2e9f5d04e2	OVA: Update kernel to 4.14.59 (#138 )	2018-08-03 12:31:14 +00:00
Pascal Vizeli	0ecf4cb293	OVA: Add support for Aeotec Zstick (#132 )	2018-08-03 12:30:59 +00:00
Pascal Vizeli	02126e0236	OS: Update supervisor 122	2018-08-03 12:30:41 +00:00
Pascal Vizeli	59cb3b4844	fix wireless settings (#124 )	2018-07-19 08:53:46 +00:00
Pascal Vizeli	ee6399a8ba	OVA: Fix serial support (#119 ) OVA: Fix serial support	2018-07-18 14:07:34 +00:00
Pascal Vizeli	1541fcab8d	Bump version 1.8	2018-07-18 12:54:21 +00:00
Pascal Vizeli	93dcc4a152	Add support for VIRTIO (#118 ) * Add support for VIRTIO * Update kernel.config	2018-07-18 12:43:19 +00:00
Pascal Vizeli	54dd3e3219	Allow more USB serial device on OVA (#115 ) * Allow more USB serial device on OVA * Update kernel.config	2018-07-18 12:43:05 +00:00
Robin	dca52c3026	Update network.md (#114 ) Clarify that you are editing the file `my-network` which is what I understand from https://www.home-assistant.io/hassio/installation/	2018-07-18 12:42:00 +00:00
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/etc-systemd-timesyncd.conf.mount`
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/etc-udev-rules.d.mount`
				`@@ -0,0 +1 @@`
				`/usr/lib/systemd/system/busybox-acpid.service`
				`@@ -0,0 +1 @@`
				`C /mnt/overlay/etc/systemd/timesyncd.conf - - - - /etc/systemd/timesyncd.conf`
				`@@ -0,0 +1 @@`
				`ACTION=="add", ATTRS{idVendor}=="1b1f", ATTRS{idProduct}=="c020", RUN+="/sbin/modprobe cp210x" RUN+="/bin/sh -c 'echo 1b1f c020 >/sys/bus/usb-serial/drivers/cp210x/new_id'"`