Bump version to 6.2

LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.

The backported fix for the lvm2 package to not install unnecessary
systemd services has already been applied with #1481.

Fixes: #1448

.dockerignore

@@ -1,3 +1,11 @@
-# Ignore everything except what we really need
-*
-!scripts/
+# We don't need this folder because we map the hole folder
+buildroot/
+buildroot-external/
+buildroot-patches/
+
+# Release directory gets created using build scripts
+release/
+
+# Ignore hidden directories as well
+.git/
+.github/

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,54 @@
+<!-- READ THIS FIRST:
+- If you need additional help with this template please refer to https://www.home-assistant.io/help/reporting_issues/
+- Make sure you are running the latest version before reporting an issue: https://github.com/home-assistant/operating-system/releases
+- Do not report issues for integrations here, please refer to https://github.com/home-assistant/core/issues
+- Do not report issues for Add-Ons here, please refer to
+  Official Add-ons: https://github.com/home-assistant/addons/issues
+  Home Assistant Community Add-ons: https://github.com/hassio-addons/repository
+- This is for bugs only. Feature and enhancement requests should go in our community forum: https://community.home-assistant.io/c/feature-requests
+- Provide as many details as possible. Paste logs, configuration sample and code using blocks with three backticks. Do not delete text from this template!
+- Please add modifications to boot files, e.g. if you are using Raspberry Pi and did modifications in config.txt.
+-->
+
+**Hardware Environment**
+<!--
+Describe the Home Assistant image you are using and the hardware environment
+-->
+- [ ] Raspberry Pi [1/2/3/4]
+- [ ] ODROID [C2/C4/N2(+)/XU4]
+- [ ] ASUS Tinker [S]
+- [ ] Generic x86-64 (like Intel NUC)
+- [ ] OVA (Open Virtualization Appliance, on Intel NUC or any other hardware, please add the Hypervisor you are using)
+
+**Home Assistant OS release:**
+- [ ] Fresh installation of release x.y
+- [ ] Updated from version x.y
+- Additional information (if accessible):
+<!--
+- Home Assistant Frontend -> Configuration -> Info (use the copy button in the System Health block)
+- Or use this command: `ha info`
+-->
+
+**Supervisor logs:**
+<!--
+- Home Assistant Frontend -> Supervisor -> System (Log Provider Supervisor)
+- Or use this command: ha su logs
+-->
+
+**Journal logs:**
+<!--
+- Enable SSH on OS level and login, then use `journalctl`
+-->
+
+**Kernel logs:**
+<!--
+- use this command: dmesg
+- Enable SSH on OS level and login, then use `dmesg`.
+-->
+
+**Description of problem:**
+<!--
+- Is the problem reproducible?
+- Has this been working before (is this a regression?)
+- Has there been attempt to rule out hardware issues? (different SD card etc.)
+-->

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,112 +0,0 @@
-name: Bug Report Form
-description: Report an issue related to the Home Assistant Operating System.
-labels: bug
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Make sure to test with the last version of the Operating System before reporting a bug.
-        If the bug appears to be a regression, make sure to check if the bug indeed disappears
-        from the previous version. Use `ha os update --version x.y` command to downgrade.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Describe the issue you are experiencing
-      description: Provide a clear and concise description of what the bug is.
-  - type: markdown
-    attributes:
-      value: |
-        ## Environment
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: What operating system image do you use?
-      options:
-        - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - generic-aarch64 (Generic UEFI capable aarch64 systems)
-        - khadas-vim3 (Khadas VIM3)
-        - odroid-c2 (Hardkernel ODROID-C2)
-        - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-m1 (Hardkernel ODROID-M1)
-        - odroid-n2 (Hardkernel ODROID-N2/N2+)
-        - odroid-xu4 (Hardkernel ODROID-XU4)
-        - ova (for Virtual Machines)
-        - rpi2 (Raspberry Pi 2)
-        - rpi3 (Raspberry Pi 3 32-bit OS)
-        - rpi3-64 (Raspberry Pi 3 64-bit OS)
-        - rpi4  (Raspberry Pi 4/400 32-bit OS)
-        - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
-        - tinker (ASUS Tinker Board/Tinker Board S)
-        - yellow (Home Assistant Yellow)
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
-
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: input
-    validations:
-      required: true
-    attributes:
-      label: What version of Home Assistant Operating System is installed?
-      placeholder: "6.6"
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: Did you upgrade the Operating System.
-      options:
-        - "Yes"
-        - "No"
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Supervisor logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Supervisor` in the top right.
-
-        [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
-      render: txt
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Host logs that might be useful for us?
-      description: >
-        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Host` in the top right.
-      render: txt
-  - type: textarea
-    attributes:
-      label: System information
-      description: >
-        **Optional** Copy the full System Health in this text area.
-
-        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
-        Click the copy button at the bottom of the pop-up and paste it here.
-        
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: >
-        **Optional** If you have any additional information for us, use the field below.
-        Please note, you can attach screenshots or screen recordings here, by
-        dragging and dropping files in the field below.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,21 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Report incorrect or missing information on our documentation
-    url: https://github.com/home-assistant/home-assistant.io/issues
-    about: Our documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant/issues
-    about: Our developer documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Request a feature for the Operating System
-    url: https://community.home-assistant.io/c/feature-requests
-    about: Request an new feature for the Operating System.
-
-  - name: I have a question or need support
-    url: https://www.home-assistant.io/help
-    about: We use GitHub for tracking bugs, check our website for resources on getting help.
-
-  - name: I'm unsure where to go?
-    url: https://www.home-assistant.io/join-chat
-    about: If you are unsure where to go, then joining our chat is recommended; Just ask!

.github/dependabot.yml

@@ -1,6 +0,0 @@
-version: 2
-updates:
-- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-      interval: "weekly"

.github/label-actions.yml

@@ -1,43 +0,0 @@
-assume-fixed:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    This issue is assumed to be fixed in the latest stable release. Please
-    reopen in case you can still reproduce the issue with the latest stable
-    release. You can find the latest stable release at
-    https://github.com/home-assistant/operating-system/releases/latest
-  close: true
-
-core-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Core. Please check
-    the [Home Assistant Core](https://github.com/home-assistant/core/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-
-supervisor-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Supervisor. Please
-    check the [Home Assistant Supervisor](https://github.com/home-assistant/supervisor/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-
-new-feature:
-  comment: >
-    :wave: @{issue-author}, thanks for your input!
-
-    We use this issue tracker to track issues of currently supported features.
-    Your request appears to request a new feature. We track potential new
-    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
-    Please check if someone already requested a similar feature, or create
-    a new feature request with the "haos" tag in that forum. Thank you!
-  close: true

.github/release-drafter.yml

@@ -1,6 +1,3 @@
-name-template: Home Assistant OS $RESOLVED_VERSION
-tag-template: $RESOLVED_VERSION
-version-template: "$MAJOR.$MINOR"
 categories:
   - title: 'Home Assistant Operating System'
     label: 'os'
@@ -8,8 +5,6 @@ categories:
     label: 'build'
   - title: 'Raspberry Pi'
     label: 'board/raspberrypi'
-  - title: 'Home Assistant Yellow'
-    label: 'board/yellow'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
   - title: 'Generic x86-64'
@@ -18,17 +13,9 @@ categories:
     label: 'board/odroid'
   - title: 'ASUS Tinker'
     label: 'board/tinker'
-  - title: 'Khadas VIM Series'
-    label: 'board/khadas'
-  - title: 'Generic aarch64'
-    label: 'board/generic-aarch64'
 filter-by-commitish: true
+commitish: dev
 template: |
   ## Changes
 
   $CHANGES
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  default: minor

.github/stale.yml

@@ -0,0 +1,17 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 60
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - pinned
+  - security
+# Label to use when marking an issue as stale
+staleLabel: wontfix
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed if no further activity occurs. Thank you
+  for your contributions.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

.github/workflows/dev.yml

@@ -4,21 +4,15 @@ name: Development build
 
 on:
   workflow_dispatch:
-  pull_request_target:
-    types: [opened,synchronize,labeled]
 
 jobs:
-  prepare:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Prepare build
+  version:
+
+    name: Generate version
     runs-on: [ "ubuntu-20.04" ]
-    permissions:
-      contents: read
-      pull-requests: read
     outputs:
       version_main: ${{ steps.version_main.outputs.version_main }}
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}${{ steps.version_pr.outputs.version_pr }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
+      version_dev: ${{ steps.version_dev.outputs.version_dev }}
     steps:
       - name: Generate Development build version
         shell: bash
@@ -26,66 +20,41 @@ jobs:
         run: |
           version_dev="dev$(date --utc +'%Y%m%d')"
           echo "Development version \"${version_dev}\""
-          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
-      - name: Generate Development build version for PR
-        if: ${{ github.event.pull_request }}
-        shell: bash
-        id: version_pr
-        run: |
-          version_pr=$(printf "%05d" ${{ github.event.pull_request.number }})
-          echo "Development build for PR #${{ github.event.pull_request.number }}"
-          echo "version_pr=${version_pr}" >> $GITHUB_OUTPUT
-      - uses: actions/checkout@v3
+          echo "::set-output name=version_dev::${version_dev}"
+      - uses: actions/checkout@v2
       - name: Get Major/Minor version
         id: version_main
         run: |
           major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
           build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          echo "version_main=${major}.${build}" >> $GITHUB_OUTPUT
-      - name: Create build matrix
-        uses: actions/github-script@v6
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-
-            if (context.eventName == "workflow_dispatch") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            }
-
-            const labels = context.payload.pull_request.labels.map(l => l.name)
-            const labelsSet = new Set(labels)
-            const buildBoards = boards.filter(b => labelsSet.has(b.label))
-
-            return { "board": buildBoards }
+          echo "::set-output name=version_main::${major}.${build}"
 
   build:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Development build for ${{ matrix.board.id }}
-    environment: "dev_build"
-    needs: prepare
+    name: Release build for ${{ matrix.board.name }}
+    needs: version
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
     runs-on: ${{ matrix.board.runner }}
 
     steps:
-      - name: Define git reference
-        uses: actions/github-script@v6
-        id: generate_gitref
-        with:
-          script: |
-            if (context.eventName == "workflow_dispatch")
-              return { "ref": context.ref }
-            return { "ref": context.payload.pull_request.head.sha }
-
-      - name: Checkout source
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          persist-credentials: false
-          ref: ${{ fromJSON(steps.generate_gitref.outputs.result).ref }}
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v2
 
       - name: Build container
         run: docker build -t haos-builder .
@@ -105,25 +74,22 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.prepare.outputs.version_dev }} ${{ matrix.board.defconfig }}
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.version.outputs.version_dev }} ${{ matrix.board.name }}
 
       - name: Upload images
-        uses: burnett01/rsync-deployments@5.2
+        uses: appleboy/scp-action@master
         with:
-          rsh: -q
-          switches: -aW
-          path: release/
-          remote_path: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}/
-          remote_host: ${{ secrets.DEV_HOST }}
-          remote_port: ${{ secrets.DEV_PORT }}
-          remote_user: ${{ secrets.DEV_USERNAME }}
-          remote_key: ${{ secrets.DEV_SSH_KEY }}
+          host: ${{ secrets.DEV_HOST }}
+          username: ${{ secrets.DEV_USERNAME }}
+          port: ${{ secrets.DEV_PORT }}
+          key: ${{ secrets.DEV_SCP_KEY }}
+          source: "release/*"
+          target: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}/
+          strip_components: 1
 
   bump_version:
-    name: Bump dev channel version
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [ build, prepare ]
+    name: Bump dev version to ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
+    needs: [ build, version ]
     runs-on: [ "ubuntu-20.04" ]
 
     steps:
@@ -134,10 +100,10 @@ jobs:
         email: ${{ secrets.GIT_EMAIL }}
         token: ${{ secrets.GIT_TOKEN }}
 
-    - name: Bump Home Assistant OS dev channel version to ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
+    - name: Bump Home Assistant OS dev version
       uses: home-assistant/actions/helpers/version-push@master
       with:
         key: "hassos[]"
         key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
+        version: ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
         channel: "dev"

.github/workflows/label-actions.yml

@@ -1,17 +0,0 @@
-name: 'Label Actions'
-
-on:
-  issues:
-    types: [labeled, unlabeled]
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-  discussions: write
-
-jobs:
-  action:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/label-actions@v3.0.0

.github/workflows/matrix.json

@@ -1,98 +0,0 @@
-[
-  {
-    "id": "ova",
-    "defconfig": "ova",
-    "runner": "x86-64-runner",
-    "label": "board/ova"
-  },
-  {
-    "id": "generic-x86-64",
-    "defconfig": "generic_x86_64",
-    "runner": "x86-64-runner",
-    "label": "board/generic-x86-64"
-  },
-  {
-    "id": "generic-aarch64",
-    "defconfig": "generic_aarch64",
-    "runner": "aarch64-runner",
-    "label": "board/generic-aarch64"
-  },
-  {
-    "id": "khadas-vim3",
-    "defconfig": "khadas_vim3",
-    "runner": "aarch64-runner",
-    "label": "board/khadas"
-  },
-  {
-    "id": "odroid-c2",
-    "defconfig": "odroid_c2",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-c4",
-    "defconfig": "odroid_c4",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1",
-    "defconfig": "odroid_m1",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-n2",
-    "defconfig": "odroid_n2",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-xu4",
-    "defconfig": "odroid_xu4",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "rpi2",
-    "defconfig": "rpi2",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3",
-    "defconfig": "rpi3",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3-64",
-    "defconfig": "rpi3_64",
-    "runner": "aarch64-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4",
-    "defconfig": "rpi4",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4-64",
-    "defconfig": "rpi4_64",
-    "runner": "aarch64-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "yellow",
-    "defconfig": "yellow",
-    "runner": "aarch64-runner",
-    "label": "board/yellow"
-  },
-  {
-    "id": "tinker",
-    "defconfig": "tinker",
-    "runner": "arm-runner",
-    "label": "board/tinker"
-  }
-]

.github/workflows/pr-checks.yml

@@ -6,23 +6,15 @@ on: [pull_request]
 
 jobs:
   linters:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-20.04
     steps:
     - name: Check out code
-      uses: actions/checkout@v3
-      with:
-        submodules: true
-
+      uses: actions/checkout@v1
     - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.5.0
+      uses: brpaz/hadolint-action@v1.1.0
       with:
         dockerfile: Dockerfile
-
     - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@2.0.0
+      uses: ludeeus/action-shellcheck@1.0.0
       with:
-        ignore: buildroot
-
-    - name: Check buildroot-external packages
-      run: |
-        buildroot/utils/check-package --exclude PackageHeader --br2-external buildroot-external/package/*/*
+        ignore: "buildroot"

.github/workflows/release-drafter.yml

@@ -4,13 +4,10 @@ on:
   push:
     branches:
       - dev
-      - rel-*
+      - rel-4
 
 jobs:
   update_release_draft:
-    permissions:
-      contents: write  # for release-drafter/release-drafter to create a github release
-      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
     runs-on: ubuntu-latest
     steps:
       - uses: release-drafter/release-drafter@v5

.github/workflows/release.yml

@@ -13,9 +13,8 @@ jobs:
     outputs:
       version: ${{ steps.version_check.outputs.version }}
       version_dev: ${{ steps.version_check.outputs.version_dev }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
       - name: Validate version
         id: version_check
         run: |
@@ -29,33 +28,38 @@ jobs:
             exit 1
           fi
           if [ "" != "${tag_dev}" ]; then
-            echo "version=${major}.${build}.${tag_dev}" >> $GITHUB_OUTPUT
+            echo "Note: Release build with custom dev part: ${tag_dev}."
+            echo "::set-output name=version::${major}.${build}.${tag_dev}"
           else
-            echo "version=${major}.${build}" >> $GITHUB_OUTPUT
+            echo "::set-output name=version::${major}.${build}"
           fi
-          echo "version_dev=${tag_dev}" >> $GITHUB_OUTPUT
-      - name: Create build matrix
-        uses: actions/github-script@v6
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            return { "board": boards }
+          echo "::set-output name=version_dev::${tag_dev}"
 
   build:
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
-    name: Release build for ${{ matrix.board.id }}
+    name: Release build for ${{ matrix.board.name }}
     needs: validate_release
     strategy:
-      matrix: ${{ fromJson(needs.validate_release.outputs.matrix) }}
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
     runs-on: ${{ matrix.board.runner }}
 
     steps:
       # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
-      - uses: actions/checkout@v3
-        with:
-          submodules: true
+      - uses: actions/checkout@v2
 
       - name: Build container
         run: docker build -t haos-builder .
@@ -75,18 +79,17 @@ jobs:
           docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
             -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
             -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.defconfig }}
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.name }}
 
       - name: Upload disk image
-        if: ${{ matrix.board.id != 'ova' }}
+        if: ${{ matrix.board.name != 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
           asset_content_type: application/x-xz
 
       - name: Upload rauc update
@@ -95,63 +98,63 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
           asset_content_type: application/octet-stream
 
       - name: Upload ova image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
           asset_content_type: application/x-tar
 
       - name: Upload qcow2 image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
           asset_content_type: application/x-xz
 
       - name: Upload vdi image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
           asset_content_type: application/zip
 
       - name: Upload vhdx image
-        if: ${{ matrix.board.id == 'ova' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
           asset_content_type: application/zip
 
       - name: Upload vmdk image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
+        if: ${{ matrix.board.name == 'ova' }}
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
           upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
           asset_content_type: application/zip
 
   bump_version:

.github/workflows/stale.yml

@@ -1,50 +0,0 @@
-name: Stale
-
-# yamllint disable-line rule:truthy
-on:
-  schedule:
-    - cron: "0 * * * *"
-  workflow_dispatch:
-
-jobs:
-  stale:
-    permissions:
-      issues: write  # for actions/stale to close stale issues
-      pull-requests: write  # for actions/stale to close stale PRs
-    runs-on: ubuntu-latest
-    steps:
-      # The 90 day stale policy
-      # Used for:
-      # - Issues & PRs
-      # - No PRs marked as no-stale or pinned
-      # - No issues marked as no-stale, help-wanted or pinned
-      - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v7.0.0
-        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 90
-          days-before-close: 7
-          operations-per-run: 150
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,pinned,enhancement"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. To keep our
-            backlog manageable we have to clean old issues, as many of them have
-            already been resolved with the latest updates.
-
-            Please make sure to update to the latest Home Assistant OS version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-          stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale,pinned"
-          stale-pr-message: >
-            There hasn't been any activity on this pull request recently. This
-            pull request has been automatically marked as stale because of that
-            and will be closed if no further activity occurs within 7 days.
-
-            Thank you for your contributions.

.gitignore

@@ -1,12 +1,3 @@
-# OS generated files
 .DS_Store
-
-# Build output dirs
 /release
-output*/
-
-# Certificates
 *.pem
-
-# vscode generated files
-.vscode*

.gitmodules

@@ -1,4 +0,0 @@
-[submodule "buildroot"]
-	path = buildroot
-	url = https://github.com/home-assistant/buildroot.git
-	branch = 2022.02.x-haos

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:bullseye
+FROM debian:buster
 
 # Set shell
 SHELL ["/bin/bash", "-o", "pipefail", "-c"]
@@ -28,24 +28,19 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         cpio \
         file \
         git \
-        graphviz \
-        jq \
         make \
         ncurses-dev \
-        openssh-client \
         patch \
         perl \
-        python3 \
-        python3-matplotlib \
-        python-is-python3 \
-        qemu-utils \
+        python \
         rsync \
-        skopeo \
         sudo \
         unzip \
-        vim \
-        wget \
         zip \
+        wget \
+        qemu-utils \
+        openssh-client \
+        vim \
     && rm -rf /var/lib/apt/lists/*
 
 # Init entry

Documentation/README.md

@@ -1,8 +1,12 @@
-# Documentation
+# Developer Documentation
 
 ## Contents
 
-- [Configuration](./configuration.md) - how users can configure HAOS
+- [Getting started](./getting_started_development.md) - the place for developers to begin
+- [Development](./development.md) - more details for developers
+- [Deployment](./deployment.md) - approach to git branching and releases
+- [Configuration](./configuration.md) - how users can configure HassOS
+- [Partition](./partition.md) - partition layout
 - [Network](./network.md) - approach to networking
 - [Bluetooth](./bluetooth.md) - approach to bluetooth
 - [Kernel](./kernel.md) - kernel versions

Documentation/boards/README.md

@@ -5,28 +5,26 @@
 The following boards/devices are supported:
 
 - Raspberry Pi
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 64-bit (recommended)
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 32-bit
-  - Pi 3 Model B and B+ 64-bit (recommended)
-  - Pi 3 Model B and B+ 32-bit
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 32-bit (recommended)
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 64-bit
+  - Pi 3 Model B and B+ 32-bit (recommended)
+  - Pi 3 Model B and B+ 64-bit
   - Pi 2 (not recommended)
   - Pi Zero-W (not recommended)
   - Pi (not recommended)
 - Hardkernel
-  - ODROID-C2
-  - ODROID-C4
-  - ODROID-M1
-  - ODROID-N2
-  - ODROID-N2+
-  - ODROID-XU4
-- Asus
-  - Tinker Board
+  - Odroid-C2
+  - Odroid-C4 (_experimental_)
+  - Odroid-N2
+  - Odroid-XU4
 - Generic x86-64 (UEFI, not suited for virtualization)
   - Intel NUC5CPYH
   - Intel NUC6CAYH
   - Intel NUC10I3FNK2
   - Gigabyte GB-BPCE-3455
-  - Computers supporting x86-64 architecture and UEFI boot should generally work
+  - Computers supporting x64-64 architecture and UEFI boot should generally work
+- Asus
+  - Tinker Board
 - Virtual appliance (x86_64/UEFI):
   - VMDK
   - OVA ?
@@ -41,16 +39,17 @@ Notes:
 
 |Board|Build|Config|Docs|
 |-----|----|------|----|
-|Pi4B 64-bit   |`make rpi4_64`       |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 32-bit   |`make rpi4`          |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|ODROID-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-M1     |`make odroid_m1`     |[odroid_m1](../../buildroot-external/configs/odroid_m1_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
-|OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|
+|Pi4B 32-bit    |`make rpi4`           |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi4B 64-bit    |`make rpi4_64`        |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 32-bit    |`make rpi3`           |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 64-bit    |`make rpi3_64`        |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi2            |`make rpi2`           |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi Zero        |`make rpi0_w`         |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi             |`make rpi`            |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
+|Odroid-C2      |`make odroid_c2`      |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4      |`make odroid_c4`      |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-N2      |`make odroid_n2`      |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-XU4     |`make odroid_xu4`     |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|Tinker Board   |`make tinker`         |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
+|Generic x86-64 |`make generic_x86_64` |[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
+|OVA            |`make ova`            |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/generic-aarch64/README.md

@@ -1,36 +0,0 @@
-# Generic aarch64
-
-## Supported Hardware
-
-This board configuration aims to support most aarch64 systems with UEFI boot
-Hardware it has been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| QEMU                  | QEMU         | yes     | [generic_aarch64](../../../buildroot-external/configs/generic_aarch64_defconfig) |
-
-
-## Requirements
-
-- aarch64 support
-- UEFI boot
-
-## Wifi
-
-WiFi is untested.
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live environment using PXE or USB
-- Copy or download the Home Assistant OS image into your live environment
-- unxz the image and dd to the local hard disk
-- Reboot

Documentation/boards/generic-x86-64/README.md

@@ -12,7 +12,6 @@ been tested with is listed below.
 |-----------------------|--------------|---------|-------------|
 | Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYS        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
@@ -49,7 +48,7 @@ The following cards are supported:
 
 ## Bluetooth
 
-Bluetooth integrated in Intel Wireless cards working OK, other options untested.
+Bluetooth is untested.
 
 ## Installation
 

Documentation/boards/hardkernel/README.md

@@ -4,11 +4,10 @@
 
 | Device         | Release Date  | Support      | Config    |
 |----------------|---------------|--------------|-----------|
-| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | yes          | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
-| ODROID-M1      | 2022          | yes          | [odroid_m1](../../../buildroot-external/configs/odroid_m1_defconfig) |
-| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 | ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
+| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
+| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 
 See separate documentation for each board.
 

Documentation/boards/hardkernel/odroid-c2.md

@@ -1,4 +1,4 @@
-# ODROID-C2
+# Odroid-C2
 
 ## eMMC
 

Documentation/boards/hardkernel/odroid-c4.md

@@ -1,10 +1,10 @@
-# ODROID-C4
+# Odroid-C4
 
 ## Experimental
 
-ODROID-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
+Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
 
-Please also refer to the documentation pages for the [ODROID-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
+Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
 
 Common C4 issues that have been specifically tested and appear to be working:
 - boot from SD

Documentation/boards/hardkernel/odroid-m1.md

@@ -1,37 +0,0 @@
-# ODROID-M1
-
-Home Assistant OS 10 and newer support the ODROID-M1 board.
-
-## SD-card
-
-SD-card boot is supported via on-board bootloader (SPL) or recovery button.
-
-## eMMC
-
-eMMC boot is currently only supported via recovery button. eMMC boot via
-on-board bootloader will require an update of Petitboot (as of March 13 2023,
-this update hasn't been released yet.
-
-## NVMe
-
-Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
-
-## Technical notes on boot flow
-
-The Home Assistant OS image is bootable by the SoC directly. This means that no help
-from the Hardkernel provided and pre-installed bootloader Petitboot is necessary.
-However, the ODROID-M1 automatically boots from internal SPI. To boot
-directly off the SD-card or eMMC you need to press the recovery button.
-
-The SPI flashed U-Boot SPL tries searches for an U-Boot binary on the SD-card
-(and future releases also on the eMMC). This mechanism allows you to boot the Home
-Assistant OS U-Boot without pressing the recovery button.
-
-## Console
-
-By default, console access is available on the serial header (CON1) and on HDMI.
-The serial console's baudrate is 1500000 by default.
-
-The systemd startup messages will only appear on the serial console by default.
-To show the messages on the HDMI console instead, add the console manually
-to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).

Documentation/boards/hardkernel/odroid-n2.md

@@ -1,4 +1,4 @@
-# ODROID-N2
+# Odroid-N2
 
 ## eMMC
 

Documentation/boards/raspberrypi/README.md

@@ -6,8 +6,16 @@
 |---------------------|---------------|-----------------|--------------------|
 | Raspberry Pi B/B+/A+|2012/2014/2014 | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
 | Raspberry Pi 2 B    |2015           | not recommended | [rpi2](../../../buildroot-external/configs/rpi2_defconfig)             |
+| Raspberry Pi Zero   |2015           | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
+| Raspberry Pi Zero W |2017           | not recommended | [rpi0_w](../../../buildroot-external/configs/rpi0_w_defconfig)           |
 | Raspberry Pi 3 B/B+ |2016/2018      | yes             | [rpi3](../../../buildroot-external/configs/rpi3_defconfig) / [rpi3_64](../../../buildroot-external/configs/rpi3_64_defconfig) |
-| Raspberry Pi 4 B    |2019           | yes             | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
+| Raspberry Pi 4 B    |2019           | yes*            | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
+
+\*1,2 and 4 GiB versions of the Raspberry Pi 4 B are supported. Support for the 8 GiB version is coming soon is part of #740.
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
 
 ## Serial console
 

Documentation/configuration.md

@@ -23,9 +23,8 @@ hassos-xy.raucb
 - The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
 - The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page.
 
-Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
-
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later using `ha os import` from the CLI or by calling `systemctl restart hassos-config` on the OS shell. *The USB Stick just needs to be inserted to the device during this setup process and can be removed afterwards.*
+You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*
 
 ## Local
 
@@ -53,7 +52,7 @@ Our default NTP configuration look like:
 
 ```
 [Time]
-NTP=time.cloudflare.com
+NTP=time1.google.com time2.google.com time3.google.com
 FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
 ```
 

Documentation/deployment.md

@@ -0,0 +1,22 @@
+# Deployment
+
+We provide 3 different types of release builds:
+
+- development (dev)
+- staging (beta)
+- production (stable)
+
+## Versioning
+
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development number they will be bump for the stable release version and the development version go to next major number.
+
+## Git branch/Tag
+
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch contains the development version and from there we build a beta release.
+
+If we create a new productive/staging release, we create a new branch `rel-{MAJOR}`. They will be used for the whole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.

Documentation/development.md

@@ -0,0 +1,60 @@
+# Development
+
+## Boot system
+
+`BOOT_SYS`:
+
+- efi
+- hybrid
+- mbr
+
+HassOS is using GPT. But to use GPT we need own the first 1024 of boot drive. Is that's not possible, you can use MBR for your device. This also work with SPLs.
+
+Hybrid and SPL use both a hybrid MBR/GPT table but SPL move the GPT header 8 MB for give space to write SPL and boot images before.
+
+`BOOT_SPL`:
+
+- true
+- false
+
+Enable SPL update handling.
+
+`BOOTLOADER`:
+
+- U-Boot
+- barebox
+
+We support mainly U-Boot but for UEFI systems we can also use [barebox](https://barebox.org/). In the future, we hope to remove barebox with U-Boot also on UEFI.
+
+`DISK_SIZE`:
+
+Default 2. That is the size of end image in GB.
+
+## Supervisor
+
+`SUPERVISOR_MACHINE`:
+
+- intel-nuc
+- odroid-c2
+- odroid-c4
+- odroid-n2
+- odroid-xu
+- qemuarm
+- qemuarm-64
+- qemux86
+- qemux86-64
+- raspberrypi
+- raspberrypi2
+- raspberrypi3
+- raspberrypi4
+- raspberrypi3-64
+- raspberrypi4-64
+- tinker
+
+`SUPERVISOR_ARCH`:
+
+- amd64
+- i386
+- armhf
+- armv7
+- aarch64

Documentation/getting_started_development.md

@@ -0,0 +1,101 @@
+# Getting started with HassOS development using Docker on GNU/Linux
+
+First, install `docker-ce` for your distribution. I'd advise to use your distro's provided packages, since that will make sure permissions et al. are sanely set up for what you are about to run. You're also expected to have your current user properly set up in in your sudoers policy, so that this account may elevate to root and execute arbitrary commands as UID 0 (this is required, since at some point during the build process, a new loopback device-backed filesystem image will be mounted inside a Docker container - which requires a "privileged" container to run, which can only be done as root).
+
+Next, make sure the Docker daemon is running:
+
+```bash
+$ sudo systemctl status docker
+● docker.service - Docker Application Container Engine
+   Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
+   Active: inactive (dead)
+     Docs: https://docs.docker.com
+```
+
+My desktop distro doesn't start newly installed services by default, which means I'll have to manually fire up the `docker` service:
+
+```bash
+$ sudo systemctl start docker
+$ sudo systemctl --no-pager status docker -n0
+● docker.service - Docker Application Container Engine
+   Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
+   Active: active (running) since Wed 2018-10-10 21:08:23 CEST; 25s ago
+     Docs: https://docs.docker.com
+ Main PID: 1531 (dockerd)
+    Tasks: 27 (limit: 4915)
+   Memory: 163.4M
+   CGroup: /system.slice/docker.service
+           ├─1531 /usr/bin/dockerd -H fd://
+           └─1539 docker-containerd --config /var/run/docker/containerd/containerd.toml
+```
+
+Now, change your working directory to your home-assistant/operating-system repository checkout (please adapt path names as needed), make sure your intended changes to the source tree are applied (and committed, ideally :)), and execute the `enter.sh` helper script:
+
+```bash
+$ cd ~/codebase/operating-system/
+$ sudo scripts/enter.sh
+Sending build context to Docker daemon  30.48MB
+Step 1/6 : FROM ubuntu:18.04
+[...]
+ ---> 4dc25a21556b
+Successfully built 4dc25a21556b
+Successfully tagged hassbuildroot:latest
+```
+
+Note that the current iteration of `enter.sh` will try to load the **overlayfs** kernel module, which is not strictly required for Docker's operation, as far as I can tell. It's OK if loading that module fails; the shell script will continue executing. If everything works out, you will find yourself in an interactive login shell inside your Docker container/build environment, where you can peek around:
+
+```bash
+root@somehashinhex:/build#
+root@somehashinhex:/build# make help
+[...]
+```
+
+The HassOS developers provide a `Makefile` that will build HassOS images for a list of targets. For example run the command below to start building the _ova_ variant, and go make a cup of tea. Or fifteen.
+
+```bash
+root@0db6f7079872:/build# make ova
+[...]
+```
+
+That will result in a single VMDK image file at the very end of the build process. This image file is a compressed block device dump with a proper GPT partition table, prepared to ship into any OVA-compatible hypervisor's innards. For me, the end of the **ova** build steps looks like this:
+
+```bash
+[...]
+2097152+0 records out
+1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.2145 s, 87.9 MB/s
+make: Leaving directory '/build/buildroot'
+make: Entering directory '/build/buildroot'
+rm -rf /build/buildroot/output/target /build/buildroot/output/images /build/buildroot/output/host  \
+	/build/buildroot/output/build /build/buildroot/output/staging \
+	/build/buildroot/output/legal-info /build/buildroot/output/graphs
+make: Leaving directory '/build/buildroot'
+```
+
+The artifacts you just built are placed in the `target/` subdirectory:
+
+```bash
+root@fd292c061896:/build# ls -lh release/
+total 141M
+-rw-r--r-- 1 root root 141M Oct 10 20:22 hassos_ova-2.2.vmdk.gz
+```
+
+In order to be able to use this image file with the QEMU hypervisor, you'll need to unpack it, and convert it to an image format that QEMU can work with. Conveniently, the HassOS buildenv already provides all the tools we need for this conversion:
+
+```bash
+root@fd292c061896:/build# gunzip release/hassos_ova-2.2.qcow2.gz
+root@fd292c061896:/build# ls -lh release/
+total 673M
+-rw-r--r-- 1 root root 337M Oct 10 20:25 hassos_ova-2.2.qcow2
+```
+
+Now, exit the docker container's environment, and find the build artifacts in the `releases/` directory beneath your repository checkout dir. (The generated files will be owned by _root_; make sure to `chown` them to your user account, if needed.)
+
+From there, QEMU can try to boot it. Since the generated image assumes UEFI support in the host/hypervisor, this is slightly more tricky than with "classic"(/legacy) MBR-based images. On the *Debian* host I use to run my QEMU virtual machine on, you'll need to install the **ovmf** package which provides the "UEFI firmware for 64-bit x86 virtual machines". That package will install a **TianoCore**-derived QEMU UEFI image build at `/usr/share/OVMF/OVMF_CODE.fd`, which we'll use with QEMU to boot the generated qcow2 image. (Please adapt path names as necessary, for example if you have installed the ovmf firmware image at another location.)
+
+```bash
+$ /usr/bin/qemu-system-x86_64 -enable-kvm -name hassos_ova -smp 2 -m 1024 -drive file=release/hassos_ova-2.2.qcow2,index=0,media=disk,if=ide,cache=none,format=qcow2 -drive file=/usr/share/ovmf/x64/OVMF_CODE.fd,if=pflash,format=raw,readonly=on
+```
+
+This should pop up QEMU's SDL frontend, displaying _hassos_' VT/CLI environment. Specifying additional options and flags to QEMU for network access, keyboard layout et al. are left as an exercise for the reader.
+
+After the boot process has finished, you can log in to _hassos_ without a password, providing *root* as the username. From there, executing `login` on the *ha>* shell prompt will yield a root shell in the host OS.

Documentation/kernel.md

@@ -1,23 +1,19 @@
 
 # Kernel Version
 
-Default Kernel tree: 6.1
+Default Kernel tree: 5.10
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 6.1.34 |
-| Raspberry Pi | 6.1.21 |
-| Raspberry Pi 0-W | 6.1.21 |
-| Raspberry Pi 2 | 6.1.21 |
-| Raspberry Pi 3 | 6.1.21 |
-| Raspberry Pi 4 | 6.1.21 |
-| Home Assistant Yellow | 6.1.21 |
-| Tinker Board | 6.1.34 |
-| ODROID-C2 | 6.1.34 |
-| ODROID-C4 | 6.1.34 |
-| ODROID-M1 | 6.1.34 |
-| ODROID-N2 | 6.1.34 |
-| ODROID-XU4 | 6.1.34 |
-| Generic aarch64 | 6.1.34 |
-| Generic x86-64 | 6.1.34 |
-| Khadas VIM3 | 6.1.34 |
+| Open Virtual Appliance | 5.10.53 |
+| Raspberry Pi | 5.10.17 |
+| Raspberry Pi 0-W | 5.10.17 |
+| Raspberry Pi 2 | 5.10.17 |
+| Raspberry Pi 3 | 5.10.17 |
+| Raspberry Pi 4 | 5.10.17 |
+| Tinker Board | 5.10.53 |
+| Odroid-C2 | 5.10.53 |
+| Odroid-C4 | 5.10.53 |
+| Odroid-N2 | 5.10.53 |
+| Odroid-XU4 | 5.10.53 |
+| Generic x86-64 | 5.10.53 |

Documentation/network.md

@@ -128,14 +128,6 @@ profile using DHCP, use the following commands on the host console:
 
 Home Assistant OS will recreate the default connection profile during boot.
 
-### Enabling Wi-Fi
-
-Wi-Fi is discouraged for reliability reasons. However, if you still prefer to use Wi-Fi, you can us the `ha network` command to set up Wi-Fi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports Wi-Fi and the name of the Wi-Fi device):
-
-```bash
-ha network update wlan0 --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid "MY-SSID" --wifi-psk MY_PASS
-````
-
 ### Powersave
 
 If you have trouble with powersave then apply the following changes:

Documentation/partition.md

@@ -0,0 +1,81 @@
+# Partition
+
+The partition layout is a bit different than the typical setup. We prefer GPT, if possible. With SoCs which don't support GPT, we use a hybrid GPT. For more details about this topic, please refer to the [development](development.md) documentation.
+
+The system is designed to have as few write operations to the storage media as possible. This means that we only write during the OTA updates and 5-6 times per week on the overlay partition. The data partition receives the main I/O operations and for this reason is ideal for placing on a different drive.
+
+A visual representation looks like this:
+
+```text
+-------------------------
+|       Bootloader      |
+-------------------------
+|       Kernel A        |
+-------------------------
+|       System A        |
+|                       |
+-------------------------
+|       Kernel B        |
+-------------------------
+|       System B        |
+|                       |
+-------------------------
+|       Bootstate       |
+-------------------------
+|       Overlay         |
+|                       |
+...
+
+-------------------------
+|       Data            |
+|                       |
+-------------------------
+```
+
+Sometime the bootloader part can look different because there can be firmware or SPLs for boot the CPU on the SoC.
+
+## Data disk
+
+![Data-Disk preview](./usb-disk.png)
+
+The data partition is the only partition with real I/O. It will be expanded automatically at boot to the full size of the disk.
+
+
+## Using datactl to move the data partition.
+
+In a Home Assistant OS installation, the data is stored on the `/mnt/data` partition of the SD card. This is the only read+write partition on the SD drive. Using the `datactl` move command, this partition can be moved off of the SD card onto an externally connected drive, leaving the rest of the read-only system on the SD.
+
+The storage capacity of the external drive must be larger than the storage capacity of the existing SD card.
+
+The command needs to be run from the host console by either connecting a keyboard and monitor or making use of the [debug ssh access](https://developers.home-assistant.io/docs/operating-system/debugging/) over port 22222. The command will not work from within an SSH add-on container.
+
+Log in as `root` to get to the Home Assistant CLI and then enter `login` to continue to the host.
+
+Confirm your USB SSD/HD is connected and recognized using `fdisk -l`.
+
+With the drive connected, use the following command (replacing sdx with your drive, without a partition number):
+
+```sh
+$ datactl move /dev/sdx
+```
+
+Enter "yes" to confirm the operation. This will prepare the disk, however, the
+actual move will be running on next reboot. This will make the first boot significantly longer than usual; please be patient. Reboot with the following command:
+```sh
+$ ha host reboot
+```
+
+Once complete, the external drive
+will contain the data and will need to be plugged in to successfully boot Home
+Assistant.
+
+## Check if the move was succesful.
+Within the Home Assistant interface you won't see if the move was succesful. To check this, go to your host console again (as described above) and enter:
+```sh
+$ systemctl status mnt-data.mount
+```
+If the data partition was moved to your USB drive you should see ```sh Active: active (mounted)  ``` in the output. Also, it will show, which drive got mounted as /mnt/data (```sh Where ``` and ```sh what ``` section of the output)
+
+
+## Check Power Supply Rating
+Using an USB attached SSD can draw quite some power. For instance on Raspberry Pi 3 the official Raspberry Pi power supply (PSU) only provides 2.5A which can be too tight. Use a power supply which can at least provide 3.5A. Alternatively use a powered USB hub. Connect the Hub to one of the USB slots of your Raspberry Pi, and connect the SSD to the Hub. The power supply that came with the Hub will power the attached device(s).

Makefile

@@ -12,9 +12,9 @@ TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFI
 
 # Set O variable if not already done on the command line
 ifneq ("$(origin O)", "command line")
-O := $(BUILDDIR)/output
+O := $(BUILDROOT)/output
 else
-override O := $(BUILDDIR)/$(O)
+override O := $(BUILDROOT)/$(O)
 endif
 
 .NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) all
@@ -26,28 +26,24 @@ all: $(TARGETS)
 $(RELEASE_DIR):
 	mkdir -p $(RELEASE_DIR)
 
-savedefconfig:
-	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "savedefconfig"
-
 $(TARGETS_CONFIG): %-config:
 	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
 
 $(TARGETS): %: $(RELEASE_DIR) %-config
 	@echo "build $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
 	cp -f $(O)/images/haos_* $(RELEASE_DIR)/
 
 	# Do not clean when building for one target
 ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)
 	@echo "clean $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
 endif
 	@echo "finished $@"
 
 clean:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
 
 help:
 	@echo "Supported targets: $(TARGETS)"

README.md

@@ -1,8 +1,8 @@
 # Home Assistant Operating System
 
-Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
+Home Assistant Operating System (formerly HassOS) is an operating system optimized for hosting [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
 
-Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
+Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [buildroot](https://buildroot.org/) and it is optimized for running Home Assistant, especially on single board compute (SBC) devices like the Pi, ODROID, NUC and Tinker Board (see supported hardware below).
 
 ## Features
 
@@ -10,14 +10,14 @@ Home Assistant Operating System uses Docker as Container engine. It by default d
 - Minimized I/O
 - Over The Air (OTA) updates
 - Offline updates
-- Modular using Docker container engine
+- Modular using Docker
 
 ## Supported hardware
 
 - Raspberry Pi
 - Hardkernel ODROID
+- Intel NUC
 - Asus Tinker Board
-- Generic x86-64 (e.g. Intel NUC)
 - Virtual appliances
 
 See the full list and specific models [here](./Documentation/boards/README.md)
@@ -28,17 +28,11 @@ If you just want to use Home Assistant the official [getting started guide](http
 
 If you're interested in finding out more about Home Assistant Operating System and how it works read on...
 
-## Development
-
-If you don't have experience with embedded systems, Buildroot or the build process for Linux distributions it is recommended to read up on these topics first (e.g. [Bootlin](https://bootlin.com/docs/) has excellent resources).
-
-The Home Assistant Operating System documentation can be found on the [Home Assistant Developer Docs website](https://developers.home-assistant.io/docs/operating-system).
-
-### Components
+## HassOS components
 
 - **Bootloader:**
-  - [Barebox](https://barebox.org/) for devices that support UEFI
-  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support UEFI
+  - [Barebox](https://barebox.org/) for devices that support EFI
+  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support EFI
 - **Operating System:**
   - [Buildroot](https://buildroot.org/) LTS Linux
 - **File Systems:**
@@ -51,6 +45,12 @@ The Home Assistant Operating System documentation can be found on the [Home Assi
 - **Security:**
   - [AppArmor](https://apparmor.net/) Linux kernel security module
 
+If you don't have experience with these, embedded systems, buildroot or the build process for Linux distributions, then please read up on these topics. The rest of the documentation in this project is for developers and assumes you have experience with embedded systems or a strong understanding of the internal workings of operating systems.
+
+## Developer Documentation
+
+All developer documentation is in the [Documentation](./Documentation) directory.
+
 ### Development builds
 
 The Development build GitHub Action Workflow is a manually triggered workflow

buildroot-external/Config.in

@@ -1,18 +1,13 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/gasket/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8812au/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"

buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt

@@ -1 +0,0 @@
-console=tty1 console=ttyS0

buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg

@@ -1,85 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
-        default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
-        break
-    fi
-done
-
-# No bootable slot found, choose rescue...
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
-    fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
-    fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}

buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
-
-    mkdir -p "${BOOT_DATA}/EFI/BOOT"
-
-    cp "${BOARD_DIR}/grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" create
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual qcow2
-
-    convert_disk_image_zip vmdk
-    convert_disk_image_xz qcow2
-
-    convert_disk_image_xz
-}
-

buildroot-external/board/arm-uefi/generic-aarch64/kernel.config

@@ -1,32 +0,0 @@
-CONFIG_EFI_STUB=y
-
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_VIRTIO_INPUT=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_BLK_SCSI=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_VIRTIO_VSOCKETS=m
-CONFIG_VIRTIO_MMIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=y
-
-CONFIG_NVME_CORE=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_HWMON=y
-
-CONFIG_DRM_VIRTIO_GPU=m
-
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_HYPERV_KEYBOARD=m
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_VSOCKETS=m
-CONFIG_PCI_HYPERV=m
-CONFIG_PCI_HYPERV_INTERFACE=m
-CONFIG_FB_HYPERV=y

buildroot-external/board/arm-uefi/generic-aarch64/meta

@@ -1,11 +0,0 @@
-BOARD_ID=generic-aarch64
-BOARD_NAME="Generic aarch64"
-CHASSIS=embedded
-BOOTLOADER=grub
-KERNEL_FILE=Image
-BOOT_SYS=efi
-BOOT_SIZE=32M
-BOOT_SPL=false
-DISK_SIZE=6
-SUPERVISOR_MACHINE=qemuarm-64
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/asus/tinker/kernel.config

@@ -120,6 +120,7 @@ CONFIG_CGROUP_WRITEBACK=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y
@@ -1516,7 +1517,7 @@ CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB_RTL=y
 CONFIG_BT_HCIBTSDIO=y
-CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_SERDEV=y
 CONFIG_BT_HCIUART_H4=y
 # CONFIG_BT_HCIUART_NOKIA is not set
@@ -1526,7 +1527,6 @@ CONFIG_BT_HCIUART_ATH3K=y
 CONFIG_BT_HCIUART_3WIRE=y
 # CONFIG_BT_HCIUART_INTEL is not set
 # CONFIG_BT_HCIUART_BCM is not set
-CONFIG_BT_HCIUART_RTL=y
 # CONFIG_BT_HCIUART_QCA is not set
 # CONFIG_BT_HCIUART_AG6XX is not set
 # CONFIG_BT_HCIUART_MRVL is not set
@@ -1556,6 +1556,7 @@ CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
 CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
 CONFIG_CFG80211_DEFAULT_PS=y
 CONFIG_CFG80211_DEBUGFS=y
+CONFIG_CFG80211_CRDA_SUPPORT=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_LIB80211=y
 CONFIG_LIB80211_CRYPT_WEP=y
@@ -2474,7 +2475,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
 # CONFIG_SERIAL_ST_ASC is not set
 CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
 # CONFIG_TTY_PRINTK is not set
 # CONFIG_HVC_DCC is not set
 # CONFIG_IPMI_HANDLER is not set

buildroot-external/board/asus/tinker/meta

@@ -3,10 +3,8 @@ BOARD_NAME="Asus TinkerBoard"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
-BOOT_SYS=hybrid
-BOOT_SIZE=24M
+BOOT_SYS=hyprid
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x8000
 SUPERVISOR_MACHINE=tinker
 SUPERVISOR_ARCH=armv7

buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch

@@ -0,0 +1,64 @@
+From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
+Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 22:03:26 +0100
+Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
+
+The most essential being the RTS pin, which is clearly needed to
+upload the initial configuration into the Realtek Bluetooth
+chip, and make the Bluetooth chip work.
+
+Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
+I'll see how I do that through the DTS file in a near future.
+
+The 3 GPIOS being :
+Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
+Bluetooth Wake  : <&gpio4 26 GPIO_ACTIVE_HIGH>
+Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
+
+These are currently setup manually, through scripts. But it seems that
+GPIO handling through /sys entries might not be possible in the long
+term, the replacement being libgpio.
+Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
+here are the commands :
+
+cd /sys/class/gpio &&
+echo 146 > export &&
+echo 149 > export &&
+echo 151 > export &&
+echo high > gpio146/direction &&
+echo high > gpio149/direction &&
+echo high > gpio151/direction
+
+Resetting the chip is done like this :
+
+echo "Resetting the Bluetooth chip"
+cd /sys/class/gpio/gpio149 &&
+echo 0 > value &&
+sleep 1 &&
+echo 1 > value &&
+sleep 1
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+[move change to rk3288-tinker.dtsi]
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index acfaa12ec239..284e7982925d 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -492,6 +492,8 @@ &tsadc {
+ };
+ 
+ &uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+ 	status = "okay";
+ };
+ 
+-- 
+2.28.0
+

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,5 +1,5 @@
-From 3553f8a938dbb498aa1846a37ea343b7f53739da Mon Sep 17 00:00:00 2001
-Message-Id: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
+Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Feb 2021 19:55:41 +0100
 Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
@@ -11,10 +11,10 @@ This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
  1 file changed, 8 deletions(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 487b0e03d4b4..1569b1824c89 100644
+index 8fa80facc8cd..8636d95c45e1 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -378,8 +378,6 @@ uart0: serial@ff180000 {
+@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
  		clock-names = "baudclk", "apb_pclk";
@@ -23,7 +23,7 @@ index 487b0e03d4b4..1569b1824c89 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart0_xfer>;
  		status = "disabled";
-@@ -393,8 +391,6 @@ uart1: serial@ff190000 {
+@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
  		clock-names = "baudclk", "apb_pclk";
@@ -32,7 +32,7 @@ index 487b0e03d4b4..1569b1824c89 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart1_xfer>;
  		status = "disabled";
-@@ -421,8 +417,6 @@ uart3: serial@ff1b0000 {
+@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
  		clock-names = "baudclk", "apb_pclk";
@@ -41,7 +41,7 @@ index 487b0e03d4b4..1569b1824c89 100644
  		pinctrl-names = "default";
  		pinctrl-0 = <&uart3_xfer>;
  		status = "disabled";
-@@ -436,8 +430,6 @@ uart4: serial@ff1c0000 {
+@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
  		reg-io-width = <4>;
  		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
  		clock-names = "baudclk", "apb_pclk";
@@ -51,5 +51,5 @@ index 487b0e03d4b4..1569b1824c89 100644
  		pinctrl-0 = <&uart4_xfer>;
  		status = "disabled";
 -- 
-2.39.1
+2.30.1
 

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,10 +1,10 @@
-From 695638c05c0bb6f7bcc65e172dd132b3aa280b47 Mon Sep 17 00:00:00 2001
-Message-Id: <695638c05c0bb6f7bcc65e172dd132b3aa280b47.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
+Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
+Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface
 
 Taken from, and tested by @TonyMac32 .
 
@@ -21,10 +21,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 19 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 09618bb7d872..30430d2e64b9 100644
+index 284e7982925d..d6cc66ab5bb1 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -483,6 +483,25 @@ &sdio0 {
+@@ -485,6 +485,25 @@ &sdio0 {
  	status = "okay";
  };
  
@@ -51,5 +51,5 @@ index 09618bb7d872..30430d2e64b9 100644
  	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
  	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 -- 
-2.39.1
+2.28.0
 

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,10 +1,10 @@
-From d04122215cb56b57458e05b475e41744b8126533 Mon Sep 17 00:00:00 2001
-Message-Id: <d04122215cb56b57458e05b475e41744b8126533.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
+Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
+Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
 
 Enable I2C devices which are accessible via 40-pin header.
 
@@ -14,10 +14,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 8 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 30430d2e64b9..395afc2b2283 100644
+index d6cc66ab5bb1..7af5818ac77c 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -342,10 +342,18 @@ regulator-state-mem {
+@@ -344,10 +344,18 @@ regulator-state-mem {
  	};
  };
  
@@ -37,5 +37,5 @@ index 30430d2e64b9..395afc2b2283 100644
  	status = "okay";
  };
 -- 
-2.39.1
+2.28.0
 

buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch

@@ -1,34 +0,0 @@
-From 7d37754f29c379c5066c6abf38c8d01d654b1613 Mon Sep 17 00:00:00 2001
-Message-Id: <7d37754f29c379c5066c6abf38c8d01d654b1613.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
-
-The spi2_cs1 pin reference is missing in the spi2 first pin control
-definition.
-
-This patch is taken from the patches provided by the ARMbian team.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 1569b1824c89..478fd1bb85df 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -311,7 +311,7 @@ spi2: spi@ff130000 {
- 		dma-names = "tx", "rx";
- 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
- 		reg = <0x0 0xff130000 0x0 0x1000>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,31 +0,0 @@
-From 05fde1d1dbbe7805a58a8c445b8fb19e0df59826 Mon Sep 17 00:00:00 2001
-Message-Id: <05fde1d1dbbe7805a58a8c445b8fb19e0df59826.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:16:05 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
-
-Taken from the various patches provided by @TonyMac32 .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 395afc2b2283..c7e79e594720 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
- 				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <750000>;
--				regulator-max-microvolt = <1400000>;
-+				regulator-max-microvolt = <1450000>;
- 				regulator-name = "vdd_arm";
- 				regulator-ramp-delay = <6000>;
- 				regulator-state-mem {
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch

@@ -1,119 +0,0 @@
-From 940d61e1e04929166d5a2bcbc1934aa931952ca5 Mon Sep 17 00:00:00 2001
-Message-Id: <940d61e1e04929166d5a2bcbc1934aa931952ca5.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Sun, 7 Jan 2018 01:52:44 +0100
-Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
-
-On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
-rebooting, the system will be dead, as the SDMMC is the only way to
-boot anything, and the hardware doesn't power up the SDMMC hardware
-automatically when rebooting.
-
-So, when using an ASUS Tinkerboard system, a new reboot handler is
-installed. This reboot handler takes care of powering the SDMMC
-hardware again before restarting the system, resolving the issue.
-
-The code was inspired by the pwrseq_emmc.c, which seems to overcome
-similar effects with eMMC hardware.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
-diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index 2a99f15f527f..181718374429 100644
---- a/drivers/mmc/host/dw_mmc-rockchip.c
-+++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -12,6 +12,11 @@
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- 
-+#include <linux/regulator/consumer.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include "../core/core.h"
-+
- #include "dw_mmc.h"
- #include "dw_mmc-pltfm.h"
- 
-@@ -340,6 +345,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
- };
- MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
- 
-+struct dw_mci_rockchip_broken_boards_data {
-+	struct notifier_block reset_nb;
-+	struct platform_device *pdev;
-+};
-+
-+/* This reboot handler handles cases where disabling the SDMMC on
-+ * reboot will cause the hardware to be unable to start correctly
-+ * after rebooting.
-+ * 
-+ * This happens with Tinkerboard systems...
-+ */
-+static int dw_mci_rockchip_broken_boards_reset_nb(
-+	struct notifier_block *this,
-+	unsigned long mode, void *cmd)
-+{
-+	struct dw_mci_rockchip_broken_boards_data const *data =
-+		container_of(this,
-+			struct dw_mci_rockchip_broken_boards_data,
-+			reset_nb);
-+	struct dw_mci *host = platform_get_drvdata(data->pdev);
-+	struct mmc_host *mmc = host->slot->mmc;
-+
-+	printk(KERN_ERR "Meow.\n");
-+
-+	mmc_power_off(mmc);
-+
-+	mdelay(20);
-+
-+	if (!IS_ERR(mmc->supply.vmmc))
-+		regulator_enable(mmc->supply.vmmc);
-+
-+	if (!IS_ERR(mmc->supply.vqmmc))
-+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
-+
-+	printk(KERN_ERR "woeM.\n");
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
-+	struct platform_device *pdev)
-+{
-+	struct dw_mci_rockchip_broken_boards_data *data;
-+
-+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
-+		return;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return;
-+
-+	data->reset_nb.notifier_call =
-+		dw_mci_rockchip_broken_boards_reset_nb;
-+	data->reset_nb.priority = 255;
-+	register_restart_handler(&data->reset_nb);
-+
-+	data->pdev = pdev;
-+}
-+
- static int dw_mci_rockchip_probe(struct platform_device *pdev)
- {
- 	const struct dw_mci_drv_data *drv_data;
-@@ -367,6 +432,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
- 	}
- 
- 	pm_runtime_put_autosuspend(&pdev->dev);
-+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
- 
- 	return 0;
- }
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch

@@ -1,63 +0,0 @@
-From 479e2acb95c09b15382b3766391294790ebd200b Mon Sep 17 00:00:00 2001
-Message-Id: <479e2acb95c09b15382b3766391294790ebd200b.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 10 May 2022 22:57:26 +0200
-Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
-
-Enable Bluetooth support via UART0. Use the existing bindings
-for Realtek rtl8723bs Bluetooth device.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index c7e79e594720..5d261fae6e72 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -386,6 +386,20 @@ bl_en: bl-en {
- 		};
- 	};
- 
-+	bluetooth {
-+		bt_enable_pin: bt-enable-pin {
-+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_device_wake_pin: bt-device-wake-pin {
-+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_host_wake_pin: bt-host-wake-pin {
-+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	buttons {
- 		pwrbtn: pwrbtn {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -518,6 +532,18 @@ &tsadc {
- 
- &uart0 {
- 	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+	uart-has-rtscts;
-+
-+	bluetooth {
-+		compatible = "realtek,rtl8723bs-bt";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
-+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-+		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &uart1 {
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/1007-RK3288-DTSI-rk3288-Add-missing-SPI2-pinctrl.patch

@@ -0,0 +1,31 @@
+From 062488e4b8fd552c01e1104b3bc91a6f7ffe6c41 Mon Sep 17 00:00:00 2001
+From: Myy Miouyouyou <myy@miouyouyou.fr>
+Date: Thu, 19 Oct 2017 21:24:47 +0200
+Subject: [PATCH 10/28] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
+
+The spi2_cs1 pin reference is missing in the spi2 first pin control
+definition.
+
+This patch is taken from the patches provided by the ARMbian team.
+
+Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
+index 5b789528..9ed532cc 100644
+--- a/arch/arm/boot/dts/rk3288.dtsi
++++ b/arch/arm/boot/dts/rk3288.dtsi
+@@ -334,7 +334,7 @@
+ 		dma-names = "tx", "rx";
+ 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ 		pinctrl-names = "default";
+-		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
++		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
+ 		reg = <0x0 0xff130000 0x0 0x1000>;
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+-- 
+2.11.0
+

buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

@@ -0,0 +1,98 @@
+From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 21:58:56 +0100
+Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
+
+Adding the appropriate nodes in order to exploit the WiFi capabilities
+of the board.
+Since these capabilities are provided through SDIO, and the SDIO
+nodes were not defined, these were added too.
+
+These seems to depend on each other so they are added in one big
+patch.
+
+Split if necessary.
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
+index 1e43527aa..d4df13bed 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dts
++++ b/arch/arm/boot/dts/rk3288-tinker.dts
+@@ -6,8 +6,70 @@
+ /dts-v1/;
+ 
+ #include "rk3288-tinker.dtsi"
++#include <dt-bindings/clock/rockchip,rk808.h>
+ 
+ / {
+ 	model = "Rockchip RK3288 Asus Tinker Board";
+ 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
++
++	/* This is essential to get SDIO devices working.
++	   The Wifi depends on SDIO ! */
++	sdio_pwrseq: sdio-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk808 RK808_CLKOUT1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
++
++		/*
++		 * On the module itself this is one of these (depending
++		 * on the actual card populated):
++		 * - SDIO_RESET_L_WL_REG_ON
++		 * - PDN (power down when low)
++		 */
++		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
++	};
++
++	wireless-wlan {
++		compatible = "wlan-platdata";
++		rockchip,grf = <&grf>;
++		sdio_vref = <1800>;
++		status = "okay";
++		wifi_chip_type = "8723bs";
++		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++	};
++};
++
++&io_domains {
++	wifi-supply = <&vcc_18>;
++};
++
++&pinctrl {
++	sdio-pwrseq {
++		wifi_enable_h: wifienable-h {
++			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		chip_enable_h: chip-enable-h {
++			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&sdio0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	clock-frequency = <50000000>;
++	clock-freq-min-max = <200000 50000000>;
++	disable-wp;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	num-slots = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
++	sd-uhs-sdr104;
++	status = "okay";
++	supports-sdio;
+ };
+-- 
+2.16.4
+

buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -0,0 +1,28 @@
+From ebc29962ac27264772a4227f5abd6900cb72fa79 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 20:16:05 +0100
+Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
+
+Taken from the various patches provided by @TonyMac32 .
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index aa107ee41..3da1c830f 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
++++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -164,7 +164,7 @@
+ 				regulator-always-on;
+ 				regulator-boot-on;
+ 				regulator-min-microvolt = <750000>;
+-				regulator-max-microvolt = <1400000>;
++				regulator-max-microvolt = <1450000>;
+ 				regulator-name = "vdd_arm";
+ 				regulator-ramp-delay = <6000>;
+ 				regulator-state-mem {
+-- 
+2.16.4
+

buildroot-external/board/asus/tinker/patches/linux/2005-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard.patch

@@ -0,0 +1,116 @@
+From 302cd9b8a9f1f8a7735fabea3b9a7645dc40f9cc Mon Sep 17 00:00:00 2001
+From: Myy Miouyouyou <myy@miouyouyou.fr>
+Date: Sun, 7 Jan 2018 01:52:44 +0100
+Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
+
+On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
+rebooting, the system will be dead, as the SDMMC is the only way to
+boot anything, and the hardware doesn't power up the SDMMC hardware
+automatically when rebooting.
+
+So, when using an ASUS Tinkerboard system, a new reboot handler is
+installed. This reboot handler takes care of powering the SDMMC
+hardware again before restarting the system, resolving the issue.
+
+The code was inspired by the pwrseq_emmc.c, which seems to overcome
+similar effects with eMMC hardware.
+
+Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
+---
+ drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 66 insertions(+)
+
+diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
+index a3f1c2b30..7eac1f221 100644
+--- a/drivers/mmc/host/dw_mmc-rockchip.c
++++ b/drivers/mmc/host/dw_mmc-rockchip.c
+@@ -16,6 +16,11 @@
+ #include <linux/pm_runtime.h>
+ #include <linux/slab.h>
+ 
++#include <linux/regulator/consumer.h>
++#include <linux/reboot.h>
++#include <linux/delay.h>
++#include "../core/core.h"
++
+ #include "dw_mmc.h"
+ #include "dw_mmc-pltfm.h"
+ 
+@@ -334,6 +339,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
+ };
+ MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+ 
++struct dw_mci_rockchip_broken_boards_data {
++	struct notifier_block reset_nb;
++	struct platform_device *pdev;
++};
++
++/* This reboot handler handles cases where disabling the SDMMC on
++ * reboot will cause the hardware to be unable to start correctly
++ * after rebooting.
++ * 
++ * This happens with Tinkerboard systems...
++ */
++static int dw_mci_rockchip_broken_boards_reset_nb(
++	struct notifier_block *this,
++	unsigned long mode, void *cmd)
++{
++	struct dw_mci_rockchip_broken_boards_data const *data =
++		container_of(this,
++			struct dw_mci_rockchip_broken_boards_data,
++			reset_nb);
++	struct dw_mci *host = platform_get_drvdata(data->pdev);
++	struct mmc_host *mmc = host->slot->mmc;
++
++	printk(KERN_ERR "Meow.\n");
++
++	mmc_power_off(mmc);
++
++	mdelay(20);
++
++	if (!IS_ERR(mmc->supply.vmmc))
++		regulator_enable(mmc->supply.vmmc);
++
++	if (!IS_ERR(mmc->supply.vqmmc))
++		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
++
++	printk(KERN_ERR "woeM.\n");
++
++	return NOTIFY_DONE;
++}
++
++static void dw_mci_rockchip_register_broken_boards_reboot_handler(
++	struct platform_device *pdev)
++{
++	struct dw_mci_rockchip_broken_boards_data *data;
++
++	if (!of_machine_is_compatible("asus,rk3288-tinker"))
++		return;
++
++	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
++
++	if (!data)
++		return;
++
++	data->reset_nb.notifier_call =
++		dw_mci_rockchip_broken_boards_reset_nb;
++	data->reset_nb.priority = 255;
++	register_restart_handler(&data->reset_nb);
++
++	data->pdev = pdev;
++}
++
+ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+ {
+ 	const struct dw_mci_drv_data *drv_data;
+@@ -361,6 +426,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	pm_runtime_put_autosuspend(&pdev->dev);
++	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
+ 
+ 	return 0;
+ }
+-- 
+2.14.1
+

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -1,5 +1,5 @@
-From 966cd1782632bc8279667955ec315e93c89495e6 Mon Sep 17 00:00:00 2001
-Message-Id: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
+From 983121a741192153492a61befc0e0fc61b9f8b14 Mon Sep 17 00:00:00 2001
+Message-Id: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 12:41:50 +0000
 Subject: [PATCH 1/2] SPL: modify load address of U-Boot
@@ -15,23 +15,23 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  2 files changed, 2 insertions(+)
 
 diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index a9c9a122f6..b839fdb570 100644
+index 8686a66d13..c3363821dd 100644
 --- a/configs/tinker-rk3288_defconfig
 +++ b/configs/tinker-rk3288_defconfig
-@@ -92,3 +92,4 @@ CONFIG_VIDEO_ROCKCHIP=y
+@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
  CONFIG_DISPLAY_ROCKCHIP_HDMI=y
  CONFIG_CMD_DHRYSTONE=y
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
-index f367c9370f..c52b0753ec 100644
+index 22714833cc..f5dd23577c 100644
 --- a/configs/tinker-s-rk3288_defconfig
 +++ b/configs/tinker-s-rk3288_defconfig
-@@ -94,3 +94,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
  CONFIG_CONSOLE_SCROLL_LINES=10
  CONFIG_CMD_DHRYSTONE=y
  CONFIG_ERRNO_STR=y
 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
 -- 
-2.35.1
+2.31.1
 

buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,7 +1,7 @@
-From 98674c65a6595e7ac554f7ec9d6f0228556756f6 Mon Sep 17 00:00:00 2001
-Message-Id: <98674c65a6595e7ac554f7ec9d6f0228556756f6.1645627366.git.stefan@agner.ch>
-In-Reply-To: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
-References: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
+From f9195bc5cb18f71117f6efc1c352209e62c53706 Mon Sep 17 00:00:00 2001
+Message-Id: <f9195bc5cb18f71117f6efc1c352209e62c53706.1617731428.git.stefan@agner.ch>
+In-Reply-To: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
+References: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Fri, 24 Apr 2020 11:37:55 +0000
 Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
@@ -64,5 +64,5 @@ index f85209c649..6fa1bb0c66 100644
 +}
 +#endif
 -- 
-2.35.1
+2.31.1
 

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -16,11 +16,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/kernel-amlogic.config

@@ -145,6 +145,7 @@ CONFIG_CGROUP_WRITEBACK=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 # CONFIG_CGROUP_RDMA is not set
 CONFIG_CGROUP_FREEZER=y
@@ -1468,6 +1469,7 @@ CONFIG_CFG80211=m
 CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
 CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
 CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_CRDA_SUPPORT=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_MAC80211_HAS_RC=y
@@ -1616,6 +1618,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 CONFIG_FW_LOADER_PAGED_BUF=y
 CONFIG_EXTRA_FIRMWARE=""
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 # CONFIG_FW_LOADER_COMPRESS is not set
 CONFIG_FW_CACHE=y
 # end of Firmware loader
@@ -3809,17 +3813,15 @@ CONFIG_IR_MESON=m
 # CONFIG_IR_SIR is not set
 # CONFIG_RC_XBOX_DVD is not set
 # CONFIG_IR_TOY is not set
-CONFIG_CEC_CORE=m
+CONFIG_CEC_CORE=y
 CONFIG_CEC_NOTIFIER=y
-CONFIG_CEC_PIN=y
-CONFIG_MEDIA_CEC_RC=y
 CONFIG_MEDIA_CEC_SUPPORT=y
 # CONFIG_CEC_CH7322 is not set
 # CONFIG_CEC_CROS_EC is not set
-CONFIG_CEC_MESON_AO=m
-CONFIG_CEC_MESON_G12A_AO=m
-CONFIG_CEC_GPIO=m
-CONFIG_USB_PULSE8_CEC=m
+# CONFIG_CEC_MESON_AO is not set
+# CONFIG_CEC_MESON_G12A_AO is not set
+# CONFIG_CEC_GPIO is not set
+# CONFIG_USB_PULSE8_CEC is not set
 # CONFIG_USB_RAINSHADOW_CEC is not set
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_SUPPORT_FILTER=y
@@ -4361,10 +4363,10 @@ CONFIG_DRM_PANEL_BRIDGE=y
 # CONFIG_DRM_ANALOGIX_ANX78XX is not set
 # CONFIG_DRM_I2C_ADV7511 is not set
 # CONFIG_DRM_CDNS_MHDP8546 is not set
-CONFIG_DRM_DW_HDMI=m
+CONFIG_DRM_DW_HDMI=y
 # CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
 CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
-# CONFIG_DRM_DW_HDMI_CEC is not set
+CONFIG_DRM_DW_HDMI_CEC=y
 # end of Display Interface Bridges
 
 # CONFIG_DRM_ETNAVIV is not set
@@ -4372,8 +4374,8 @@ CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
 # CONFIG_DRM_HISI_HIBMC is not set
 # CONFIG_DRM_HISI_KIRIN is not set
 # CONFIG_DRM_MXSFB is not set
-CONFIG_DRM_MESON=m
-CONFIG_DRM_MESON_DW_HDMI=m
+CONFIG_DRM_MESON=y
+CONFIG_DRM_MESON_DW_HDMI=y
 # CONFIG_DRM_CIRRUS_QEMU is not set
 # CONFIG_DRM_GM12U320 is not set
 # CONFIG_TINYDRM_HX8357D is not set

buildroot-external/board/hardkernel/odroid-c2/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh

@@ -13,7 +13,8 @@ function hassos_pre_image() {
     mkdir -p "${BOOT_DATA}/overlays"
     cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
     cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL
     create_spl_image

buildroot-external/board/hardkernel/odroid-c2/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel ODROID-C2"
+BOARD_NAME="Hardkernel Odroid-C2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-c4/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh

@@ -12,7 +12,8 @@ function hassos_pre_image() {
     mkdir -p "${BOOT_DATA}/overlays"
     cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
     cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL
     create_spl_image

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel ODROID-C4"
+BOARD_NAME="Hardkernel Odroid-C4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c4
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh

@@ -1,25 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot.itb" of="${SPL_IMG}" conv=notrunc bs=512 seek=16384
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-m1/kernel.config

@@ -1,9 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y

buildroot-external/board/hardkernel/odroid-m1/meta

@@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1
-BOARD_NAME="Hardkernel ODROID-M1"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=gpt
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0001-arm64-dts-rockchip-Add-Hardkernel-ODROID-M1-board.patch

@@ -1,455 +0,0 @@
-From d388735d551e09b00317a509859fca51776b9826 Mon Sep 17 00:00:00 2001
-Message-Id: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Dongjin Kim <tobetter@gmail.com>
-Date: Fri, 30 Sep 2022 07:12:35 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
-
-This patch is to add a device tree for new board Hardkernel ODROID-M1
-based on Rockchip RK3568, includes basic peripherals -
-uart/eMMC/uSD/i2c and on-board ethernet.
-
-Signed-off-by: Dongjin Kim <tobetter@gmail.com>
-[aurelien@aurel32.net: addressed issues from initial review]
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile         |   1 +
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 414 ++++++++++++++++++
- 2 files changed, 415 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-
-diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
-index 8c15593c0ca4..5dc1607b3ecf 100644
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -71,4 +71,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-new file mode 100644
-index 000000000000..b3016437640b
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -0,0 +1,414 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		#clock-cells = <1>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>;
-+		rockchip,system-power-controller;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pinctrl {
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0002-arm64-dts-rockchip-add-thermal-support-to-ODROID-M1.patch

@@ -1,38 +0,0 @@
-From 24048c1753916bd983746542b16d19d2b399eeb7 Mon Sep 17 00:00:00 2001
-Message-Id: <24048c1753916bd983746542b16d19d2b399eeb7.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:36 +0200
-Subject: [PATCH] arm64: dts: rockchip: add thermal support to ODROID-M1
-
-Add the thermal nodes for the ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-4-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index b3016437640b..112c65af3f55 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -409,6 +409,12 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
- &uart2 {
- 	status = "okay";
- };
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0003-arm64-dts-rockchip-Add-NOR-flash-to-ODROID-M1.patch

@@ -1,103 +0,0 @@
-From 982bb2beab8e38a7c0a365770be2ad9c5221a650 Mon Sep 17 00:00:00 2001
-Message-Id: <982bb2beab8e38a7c0a365770be2ad9c5221a650.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:37 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add NOR flash to ODROID-M1
-
-Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add
-the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode
-and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn
-pin.
-
-The partitions addresses and sizes are taken from the ODROID-M1
-Partition Table page on the ODROID wiki.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-5-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 58 +++++++++++++++++++
- 1 file changed, 58 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 112c65af3f55..94e839c9afab 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -351,6 +351,20 @@ rgmii_phy0: ethernet-phy@0 {
- };
- 
- &pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-@@ -409,6 +423,50 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>;
- 	rockchip,hw-tshut-polarity = <0>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0004-arm64-dts-rockchip-Add-analog-audio-on-ODROID-M1.patch

@@ -1,102 +0,0 @@
-From ae25f92a09abb7dd16a9ad3b74e0c105b385f214 Mon Sep 17 00:00:00 2001
-Message-Id: <ae25f92a09abb7dd16a9ad3b74e0c105b385f214.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:38 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add analog audio on ODROID-M1
-
-On the ODROID-M1, the I2S1 TDM controller is connected to the rk809
-codec in I2S mode. It is used to provide a stereo headphones output and
-a mono speaker output. A GPIO with an external pullup is used as an
-headphone detection input.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-6-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 43 ++++++++++++++++++-
- 1 file changed, 42 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 94e839c9afab..634c1bd80b4e 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -59,6 +59,31 @@ led_work: led-1 {
- 		};
- 	};
- 
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -131,10 +156,15 @@ rk809: pmic@20 {
- 		reg = <0x20>;
- 		interrupt-parent = <&gpio0>;
- 		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
- 		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&pmic_int_l>;
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
- 		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
- 		vcc1-supply = <&vcc3v3_sys>;
- 		vcc2-supply = <&vcc3v3_sys>;
- 		vcc3-supply = <&vcc3v3_sys>;
-@@ -340,6 +370,11 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
- &mdio0 {
- 	rgmii_phy0: ethernet-phy@0 {
- 		compatible = "ethernet-phy-ieee802.3-c22";
-@@ -379,6 +414,12 @@ pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- 		};
- 	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0005-arm64-dts-rockchip-Enable-vop2-and-hdmi-tx-on-ODROID.patch

@@ -1,97 +0,0 @@
-From 3a1be3d8719ef6335385d4e5e456371e7bf7383f Mon Sep 17 00:00:00 2001
-Message-Id: <3a1be3d8719ef6335385d4e5e456371e7bf7383f.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:39 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1
-
-Enable the RK356x Video Output Processor (VOP) 2 on ODROID M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-7-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 634c1bd80b4e..126b893048fe 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -8,6 +8,7 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/leds/common.h>
- #include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
- #include "rk3568.dtsi"
- 
- / {
-@@ -37,6 +38,17 @@ dc_12v: dc-12v-regulator {
- 		regulator-max-microvolt = <12000000>;
- 	};
- 
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -131,6 +143,24 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -517,3 +547,20 @@ &tsadc {
- &uart2 {
- 	status = "okay";
- };
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0006-arm64-dts-rockchip-Enable-HDMI-audio-on-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From ded87dc761951205b8b9ba8ee4081e28a850a3db Mon Sep 17 00:00:00 2001
-Message-Id: <ded87dc761951205b8b9ba8ee4081e28a850a3db.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:40 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable HDMI audio on ODROID-M1.
-
-This enables the i2s0 controller and the hdmi-sound node on the
-ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-8-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 126b893048fe..ac4e94d18feb 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -161,6 +161,10 @@ hdmi_out_con: endpoint {
- 	};
- };
- 
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -400,6 +404,10 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
- &i2s1_8ch {
- 	rockchip,trcm-sync-tx-only;
- 	status = "okay";
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0007-arm64-dts-rockchip-Enable-the-GPU-on-ODROID-M1.patch

@@ -1,37 +0,0 @@
-From 13438a717627cae086cc3a1126552cffa2f4bd16 Mon Sep 17 00:00:00 2001
-Message-Id: <13438a717627cae086cc3a1126552cffa2f4bd16.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:41 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the GPU on ODROID-M1
-
-Enable the GPU core on the Rockchip RK3568 ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-9-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index ac4e94d18feb..e4b7699d3eea 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -143,6 +143,11 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
- &hdmi {
- 	avdd-0v9-supply = <&vdda0v9_image>;
- 	avdd-1v8-supply = <&vcca1v8_image>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0008-arm64-dts-rockchip-Enable-the-USB-2.0-ports-on-ODROI.patch

@@ -1,111 +0,0 @@
-From 0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c Mon Sep 17 00:00:00 2001
-Message-Id: <0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:42 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
-providing one host-only port and one OTG port. On the ODROID-M1, they
-are both used in host mode. The USB ports are powered by a DC/DC
-converter providing 5V and named VCC5V0_SYS on the schematics, followed
-by a power switch.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index e4b7699d3eea..2e4cc20bd676 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -105,6 +105,28 @@ vcc3v3_sys: vcc3v3-sys-regulator {
- 		regulator-max-microvolt = <3300000>;
- 		vin-supply = <&dc_12v>;
- 	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
- };
- 
- &cpu0 {
-@@ -463,6 +485,15 @@ hp_det_pin: hp-det-pin {
- 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
-@@ -561,6 +592,36 @@ &uart2 {
- 	status = "okay";
- };
- 
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
- &vop {
- 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0009-arm64-dts-rockchip-Enable-the-USB-3.0-ports-on-ODROI.patch

@@ -1,114 +0,0 @@
-From d8abc451c669a8fd36b31db5cb96ec49da819124 Mon Sep 17 00:00:00 2001
-Message-Id: <d8abc451c669a8fd36b31db5cb96ec49da819124.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:43 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals
-are connected to a PHY providing one host-only port and one OTG port.
-The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY.
-
-The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals
-connected to the two combo PHYs. For the USB 2.0 signals, one connector
-is connected to the host-only PHY and uses the same power switch as the
-USB 2.0 ports. The other connector has its own power switch and is
-connected to the OTG PHY, which is also connected to a device only
-micro-USB connector. The purpose of this micro-USB connector is for
-firmware update using the Rockusb vendor specific USB class. Therefore
-it does not make sense to enable this port on Linux, and the PHY is
-forced to host mode.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-11-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 49 ++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2e4cc20bd676..9a84a7e76d7a 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -127,6 +127,30 @@ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
- 		regulator-max-microvolt = <5000000>;
- 		vin-supply = <&vcc5v0_sys>;
- 	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
- };
- 
- &cpu0 {
-@@ -490,7 +514,7 @@ usb {
- 		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
- 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
--		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-@@ -600,6 +624,11 @@ &usb_host0_ohci {
- 	status = "okay";
- };
- 
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
- &usb_host1_ehci {
- 	status = "okay";
- };
-@@ -608,6 +637,24 @@ &usb_host1_ohci {
- 	status = "okay";
- };
- 
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
- &usb2phy1 {
- 	status = "okay";
- };
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0010-arm64-dts-rockchip-Add-SATA-support-to-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From 2f6d4521403932ca22cb4dabef9033f1d52232ba Mon Sep 17 00:00:00 2001
-Message-Id: <2f6d4521403932ca22cb4dabef9033f1d52232ba.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:44 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add SATA support to ODROID-M1
-
-Enable the Combo PHY and SATA nodes in ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-12-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 9a84a7e76d7a..bd24ccf94e76 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -153,6 +153,11 @@ &combphy1 {
- 	status = "okay";
- };
- 
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vdd_cpu>;
- };
-@@ -538,6 +543,10 @@ &saradc {
- 	status = "okay";
- };
- 
-+&sata2 {
-+	status = "okay";
-+};
-+
- &sdhci {
- 	bus-width = <8>;
- 	max-frequency = <200000000>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0011-arm64-dts-rockchip-Add-PCIEe-v3-nodes-to-ODROID-M1.patch

@@ -1,80 +0,0 @@
-From 1572a9c5d9fa9f654fbc1909528ae5940ad34aa3 Mon Sep 17 00:00:00 2001
-Message-Id: <1572a9c5d9fa9f654fbc1909528ae5940ad34aa3.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:45 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1
-
-Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-13-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 34 +++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index bd24ccf94e76..2f685c606bb9 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -96,6 +96,19 @@ simple-audio-card,codec {
- 		};
- 	};
- 
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -479,6 +492,18 @@ rgmii_phy0: ethernet-phy@0 {
- 	};
- };
- 
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
- &pinctrl {
- 	fspi {
- 		fspi_dual_io_pins: fspi-dual-io-pins {
-@@ -503,6 +528,15 @@ led_work_pin: led-work-pin {
- 		};
- 	};
- 
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	pmic {
- 		pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0012-arm64-dts-rockchip-Add-IR-receiver-node-to-ODROID-M1.patch

@@ -1,54 +0,0 @@
-From b2eae73eeb32dd9383571de6af18fc8bd39aac3a Mon Sep 17 00:00:00 2001
-Message-Id: <b2eae73eeb32dd9383571de6af18fc8bd39aac3a.1678107917.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1678107917.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:46 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add IR receiver node to ODROID-M1
-
-Add the infrared receiver and its associated pinctrl entry. Note that
-there is an external pullup to VCC3V3_SYS.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-14-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2f685c606bb9..59ecf868dbd0 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -49,6 +49,13 @@ hdmi_con_in: endpoint {
- 		};
- 	};
- 
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -519,6 +526,13 @@ fspi_dual_io_pins: fspi-dual-io-pins {
- 		};
- 	};
- 
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0001-arm64-dts-rockchip-rk3568-Add-ODROID-M1-board-suppor.patch

@@ -1,899 +0,0 @@
-From 6819a79bdb3c6a63459622e894b8fea9f7f407c5 Mon Sep 17 00:00:00 2001
-Message-Id: <6819a79bdb3c6a63459622e894b8fea9f7f407c5.1678356433.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 6 Mar 2023 10:35:01 +0100
-Subject: [PATCH] arm64: dts: rockchip: rk3568: Add ODROID-M1 board support
-
-Add ODROID-M1 board support. Board device tree rk3568-odroid-m1.dts
-from v6.3-rc1.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/dts/Makefile                     |   1 +
- arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi |  28 +
- arch/arm/dts/rk3568-odroid-m1.dts         | 744 ++++++++++++++++++++++
- configs/odroid-m1_defconfig               |  74 +++
- 4 files changed, 847 insertions(+)
- create mode 100644 arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
- create mode 100644 arch/arm/dts/rk3568-odroid-m1.dts
- create mode 100644 configs/odroid-m1_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index c160e884bf..7958922b32 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -166,6 +166,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
- 
- dtb-$(CONFIG_ROCKCHIP_RK3568) += \
- 	rk3568-evb.dtb \
-+	rk3568-odroid-m1.dts \
- 	rk3566-radxa-cm3-io.dtb \
- 	rk3568-rock-3a.dtb
- 
-diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-new file mode 100644
-index 0000000000..83fa66d591
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-@@ -0,0 +1,28 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * (C) Copyright 2021 Rockchip Electronics Co., Ltd
-+ * (C) Copyright 2023 Akash Gajjar <gajjar04akash@gmail.com>
-+ */
-+
-+#include "rk356x-u-boot.dtsi"
-+
-+/ {
-+	chosen {
-+		stdout-path = &uart2;
-+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc0;
-+	};
-+};
-+
-+&sdmmc0 {
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	clock-frequency = <24000000>;
-+	bootph-all;
-+	u-boot,dm-pre-reloc;
-+};
-diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
-new file mode 100644
-index 0000000000..59ecf868db
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1.dts
-@@ -0,0 +1,744 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
-+		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
-+		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sata2 {
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
-diff --git a/configs/odroid-m1_defconfig b/configs/odroid-m1_defconfig
-new file mode 100644
-index 0000000000..82cceec01b
---- /dev/null
-+++ b/configs/odroid-m1_defconfig
-@@ -0,0 +1,74 @@
-+CONFIG_ARM=y
-+CONFIG_SKIP_LOWLEVEL_INIT=y
-+CONFIG_COUNTER_FREQUENCY=24000000
-+CONFIG_ARCH_ROCKCHIP=y
-+CONFIG_TEXT_BASE=0x00a00000
-+CONFIG_SPL_LIBCOMMON_SUPPORT=y
-+CONFIG_SPL_LIBGENERIC_SUPPORT=y
-+CONFIG_NR_DRAM_BANKS=2
-+CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
-+CONFIG_ROCKCHIP_RK3568=y
-+CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
-+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-+CONFIG_SPL_MMC=y
-+CONFIG_SPL_SERIAL=y
-+CONFIG_SPL_STACK_R_ADDR=0x600000
-+CONFIG_TARGET_EVB_RK3568=y
-+CONFIG_DEBUG_UART_BASE=0xFE660000
-+CONFIG_DEBUG_UART_CLOCK=24000000
-+CONFIG_SYS_LOAD_ADDR=0xc00800
-+CONFIG_DEBUG_UART=y
-+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-+CONFIG_FIT=y
-+CONFIG_FIT_VERBOSE=y
-+CONFIG_SPL_LOAD_FIT=y
-+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
-+# CONFIG_DISPLAY_CPUINFO is not set
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+CONFIG_SPL_MAX_SIZE=0x20000
-+CONFIG_SPL_PAD_TO=0x7f8000
-+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-+CONFIG_SPL_BSS_START_ADDR=0x4000000
-+CONFIG_SPL_BSS_MAX_SIZE=0x4000
-+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-+CONFIG_DM_PMIC=y
-+CONFIG_PMIC_RK8XX=y
-+CONFIG_SPL_PMIC_RK8XX=y
-+CONFIG_SPL_STACK=0x400000
-+CONFIG_SPL_STACK_R=y
-+CONFIG_SPL_ATF=y
-+CONFIG_CMD_I2C=y
-+CONFIG_CMD_GPT=y
-+CONFIG_CMD_MMC=y
-+# CONFIG_CMD_SETEXPR is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+CONFIG_SPL_OF_CONTROL=y
-+CONFIG_OF_LIVE=y
-+CONFIG_NET_RANDOM_ETHADDR=y
-+CONFIG_REGULATOR_RK8XX=y
-+CONFIG_SPL_REGMAP=y
-+CONFIG_SPL_SYSCON=y
-+CONFIG_SPL_CLK=y
-+CONFIG_ROCKCHIP_GPIO=y
-+CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_MISC=y
-+CONFIG_SUPPORT_EMMC_RPMB=y
-+CONFIG_MMC_DW=y
-+CONFIG_MMC_DW_ROCKCHIP=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_SDMA=y
-+CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_GMAC_ROCKCHIP=y
-+CONFIG_REGULATOR_PWM=y
-+CONFIG_PWM_ROCKCHIP=y
-+CONFIG_SPL_RAM=y
-+CONFIG_DM_RESET=y
-+CONFIG_BAUDRATE=1500000
-+CONFIG_DEBUG_UART_SHIFT=2
-+CONFIG_SYS_NS16550_MEM32=y
-+CONFIG_SYSRESET=y
-+# CONFIG_BINMAN_FDT is not set
-+CONFIG_ERRNO_STR=y
--- 
-2.39.2
-

buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush

@@ -1,98 +0,0 @@
-
-part start mmc ${devnum} hassos-bootstate mmc_env
-
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
-
-part number mmc ${devnum} hassos-boot boot_partnum
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:${boot_partnum} haos-config.txt; then
-  fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile rk3568-odroid-m1.dtb
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      part number mmc ${devnum} hassos-kernel0 kernel_partnum
-      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      part number mmc ${devnum} hassos-kernel1 kernel_partnum
-      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-m1/uboot.config

@@ -1,5 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

buildroot-external/board/hardkernel/odroid-n2/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh

@@ -12,7 +12,8 @@ function hassos_pre_image() {
     mkdir -p "${BOOT_DATA}/overlays"
     cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
     cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL
     create_spl_image

buildroot-external/board/hardkernel/odroid-n2/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-n2
-BOARD_NAME="Hardkernel ODROID-N2"
+BOARD_NAME="Hardkernel Odroid-N2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-n2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -18,11 +18,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-xu4/cmdline.txt

@@ -1 +0,0 @@
-console=tty1 console=ttySAC2,115200

buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh

@@ -11,7 +11,8 @@ function hassos_pre_image() {
 
     cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
     cp "${BINARIES_DIR}/exynos5422-odroidxu4.dtb" "${BOOT_DATA}/exynos5422-odroidxu4.dtb"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty1 console=ttySAC2,115200" > "${BOOT_DATA}/cmdline.txt"
 
     # SPL
     create_spl_image

buildroot-external/board/hardkernel/odroid-xu4/meta

@@ -1,12 +1,10 @@
 BOARD_ID=odroid-xu4
-BOARD_NAME="Hardkernel ODROID-XU4"
+BOARD_NAME="Hardkernel Odroid-XU4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
 BOOT_SYS=mbr
-BOOT_SIZE=24M
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x4000
 SUPERVISOR_MACHINE=odroid-xu
 SUPERVISOR_ARCH=armv7

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-regulator-s2mps11-add-ethernet-power-rese.patch

@@ -1,94 +0,0 @@
-From e7d59e0444170873e945a0675ed1565a65c99e17 Mon Sep 17 00:00:00 2001
-Message-Id: <e7d59e0444170873e945a0675ed1565a65c99e17.1676489173.git.stefan@agner.ch>
-From: memeka <mihailescu2m@gmail.com>
-Date: Fri, 18 Jan 2019 14:36:21 +1030
-Subject: [PATCH] ODROID-XU4: regulator: s2mps11: add ethernet power reset in
- shutdown function
-
-Ethernet device cannot be detected on warm boot sometimes. This patch is
-to add the power reset routines for ethernet device using PMIC. Then
-ethernet device can be reset hardware-wise.
-
-Change-Id: Iffbe2966da7e4679f63b91ab79241167391792df
-Signed-off-by: Brian Kim <brian.kim@hardkernel.com>
-Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
----
- drivers/regulator/s2mps11.c | 55 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 55 insertions(+)
-
-diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
-index ebc67e3ddd4f..51f128076db9 100644
---- a/drivers/regulator/s2mps11.c
-+++ b/drivers/regulator/s2mps11.c
-@@ -1117,6 +1117,57 @@ static const struct regulator_desc s2mpu02_regulators[] = {
- 	regulator_desc_s2mpu02_buck7(7),
- };
- 
-+static int s2mps11_pmic_ethonoff(struct platform_device *pdev, bool onoff)
-+{
-+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-+	unsigned int reg_val = 0;
-+	int ret = 0;
-+
-+	ret = regmap_read(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, &reg_val);
-+	if (ret) {
-+		dev_err(&pdev->dev, "failed to read S2MPS11_REG_L15CTRL value\n");
-+		return ret;
-+	}
-+
-+	ret = regmap_read(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, &reg_val);
-+	if (ret) {
-+		dev_err(&pdev->dev, "failed to read S2MPS11_REG_L17CTRL value\n");
-+		return ret;
-+	}
-+
-+	if (onoff) {
-+		/* ETH VDD0 ON */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, 0xFF, 0x72);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL15 register\n");
-+			return ret;
-+		}
-+
-+		/* ETH VDD1 ON */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, 0xFF, 0x72);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL17 register\n");
-+			return ret;
-+		}
-+	} else {
-+		/* ETH VDD0 OFF */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L15CTRL, 0x3F, 0x00);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL15 register\n");
-+			return ret;
-+		}
-+
-+		/* ETH VDD1 OFF */
-+		ret = regmap_update_bits(iodev->regmap_pmic, S2MPS11_REG_L17CTRL, 0x3F, 0x00);
-+		if (ret) {
-+			dev_err(&pdev->dev, "cannot update S2MPS11 LDO CTRL17 register\n");
-+			return ret;
-+		}
-+	}
-+
-+	return ret;
-+}
-+
- static int s2mps11_pmic_probe(struct platform_device *pdev)
- {
- 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-@@ -1219,6 +1270,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
- 		}
- 	}
- 
-+	dev_info(&pdev->dev, "Resetting Ethernet\n");
-+	s2mps11_pmic_ethonoff(pdev, false);
-+	mdelay(10);
-+	s2mps11_pmic_ethonoff(pdev, true);
- out:
- 	kfree(rdata);
- 
--- 
-2.39.1
-

buildroot-external/board/hardkernel/odroid-xu4/patches/uboot/0001-samsung-common-ignore-if-CROS-EC-is-not-supported.patch

@@ -1,30 +0,0 @@
-From 24252c65cfea76c5724044381bafb587a9fecd6a Mon Sep 17 00:00:00 2001
-Message-Id: <24252c65cfea76c5724044381bafb587a9fecd6a.1676446297.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 15 Feb 2023 08:30:41 +0100
-Subject: [PATCH] samsung: common: ignore if CROS EC is not supported
-
-If the CROS device class is not compiled in, uclass returns not
-supported. Ignore this case as well.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- board/samsung/common/board.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
-index 16ce5cb892..663d7ca991 100644
---- a/board/samsung/common/board.c
-+++ b/board/samsung/common/board.c
-@@ -223,7 +223,7 @@ int board_late_init(void)
- 	char mmcbootdev_str[16];
- 
- 	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
--	if (ret && ret != -ENODEV) {
-+	if (ret && ret != -ENODEV && ret != -EPFNOSUPPORT) {
- 		/* Force console on */
- 		gd->flags &= ~GD_FLG_SILENT;
- 
--- 
-2.39.1
-

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -20,11 +20,8 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,40 +0,0 @@
-From 86f6a398d2c080f92d51048ededf45efbe3a96d4 Mon Sep 17 00:00:00 2001
-Message-Id: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH] arm64: dts: meson: g12b: add power button support
-
-Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
-GPIO is low active, e.g. when connecting with pin 9 (GND) a power
-button press is triggered.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index fd3fa82e4c33..06bdba57b04c 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
- 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- 	};
- 
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		power-button {
-+			label = "power";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
--- 
-2.39.1
-