Check simlink (#90)

* Fix time on overlay

* Fix rights

* Fix timesync

.dockerignore

@@ -1,12 +1,3 @@
-# We don't need this folder because we map the hole folder
-buildroot/
-buildroot-external/
-buildroot-patches/
-
-# Output/Release directory gets created using build scripts
-output*/
-release/
-
-# Ignore hidden directories as well
-.git/
-.github/
+buildroot
+buildroot-external
+buildroot-patches

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,105 +0,0 @@
-name: Bug Report Form
-description: Report an issue related to the Home Assistant Operating System.
-labels: bug
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Make sure to test with the last version of the Operating System before reporting a bug.
-        If the bug appears to be a regression, make sure to check if the bug indeed disappears
-        from the previous version. Use `ha os update --version x.y` command to downgrade.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Describe the issue you are experiencing
-      description: Provide a clear and concise description of what the bug is.
-  - type: markdown
-    attributes:
-      value: |
-        ## Environment
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: What operating system image do you use?
-      options:
-        - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - khadas-vim3 (Khadas VIM3)
-        - odroid-c2 (Hardkernel ODROID-C2)
-        - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-n2 (Hardkernel ODROID-N2/N2+)
-        - odroid-xu4 (Hardkernel ODROID-XU4)
-        - ova (for Virtual Machines)
-        - rpi2 (Raspberry Pi 2)
-        - rpi3 (Raspberry Pi 3 32-bit OS)
-        - rpi3-64 (Raspberry Pi 3 64-bit OS)
-        - rpi4  (Raspberry Pi 4/400 32-bit OS)
-        - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
-        - tinker (ASUS Tinker Board/Tinker Board S)
-      description: >
-        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Board` value.
-
-        [![Open your Home Assistant instance and show your Home Assistant version information.](https://my.home-assistant.io/badges/info.svg)](https://my.home-assistant.io/redirect/info/)
-  - type: input
-    validations:
-      required: true
-    attributes:
-      label: What version of Home Assistant Operating System is installed?
-      placeholder: "6.6"
-      description: >
-        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Host Operating System` value.
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: Did you upgrade the Operating System.
-      options:
-        - "Yes"
-        - "No"
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Supervisor logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found under [Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Supervisor`.
-
-        [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
-      render: txt
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Host logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found under [Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Host`.
-      render: txt
-  - type: textarea
-    attributes:
-      label: System Health information
-      description: >
-        **Optional** Copy the full System Health in this text area.
-
-        Can be found in the [Configuration panel -> Info](https://my.home-assistant.io/redirect/info/).
-        Use the copy icon on top right and choose `For GitHub`.
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: >
-        **Optional** If you have any additional information for us, use the field below.
-        Please note, you can attach screenshots or screen recordings here, by
-        dragging and dropping files in the field below.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,21 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Report incorrect or missing information on our documentation
-    url: https://github.com/home-assistant/home-assistant.io/issues
-    about: Our documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant.io/issues
-    about: Our developer documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Request a feature for the Operating System
-    url: https://community.home-assistant.io/c/feature-requests
-    about: Request an new feature for the Operating System.
-
-  - name: I have a question or need support
-    url: https://www.home-assistant.io/help
-    about: We use GitHub for tracking bugs, check our website for resources on getting help.
-
-  - name: I'm unsure where to go?
-    url: https://www.home-assistant.io/join-chat
-    about: If you are unsure where to go, then joining our chat is recommended; Just ask!

.github/label-actions.yml

@@ -1,32 +0,0 @@
-assume-fixed:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    This issue is assumed to be fixed in the latest stable release. Please
-    reopen in case you can still reproduce the issue with the latest stable
-    release. You can find the latest stable release at
-    https://github.com/home-assistant/operating-system/releases/latest
-  close: true
-
-core-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Core. Please check
-    the [Home Assistant Core](https://github.com/home-assistant/core/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-
-supervisor-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Supervisor. Please
-    check the [Home Assistant Supervisor](https://github.com/home-assistant/supervisor/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true

.github/move.yml

@@ -0,0 +1,13 @@
+# Configuration for move-issues - https://github.com/dessant/move-issues
+
+# Delete the command comment. Ignored when the comment also contains other content
+deleteCommand: true
+# Close the source issue after moving
+closeSourceIssue: true
+# Lock the source issue after moving
+lockSourceIssue: false
+# Set custom aliases for targets
+# aliases:
+#   r: repo
+#   or: owner/repo
+

.github/release-drafter.yml

@@ -1,23 +0,0 @@
-categories:
-  - title: 'Home Assistant Operating System'
-    label: 'os'
-  - title: 'Build System'
-    label: 'build'
-  - title: 'Raspberry Pi'
-    label: 'board/raspberrypi'
-  - title: 'Open Virtual Appliance'
-    label: 'board/ova'
-  - title: 'Generic x86-64'
-    label: 'board/generic-x86-64'
-  - title: 'Hardkernel ODROID'
-    label: 'board/odroid'
-  - title: 'ASUS Tinker'
-    label: 'board/tinker'
-  - title: 'Khadas VIM Series'
-    label: 'board/khadas'
-filter-by-commitish: true
-commitish: dev
-template: |
-  ## Changes
-
-  $CHANGES

.github/workflows/dev.yml

@@ -1,143 +0,0 @@
-# Home Assistant Operating System build workflow
-
-name: Development build
-
-on:
-  workflow_dispatch:
-  pull_request_target:
-    types: [opened,synchronize,labeled]
-
-jobs:
-  prepare:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Prepare build
-    runs-on: [ "ubuntu-20.04" ]
-    outputs:
-      version_main: ${{ steps.version_main.outputs.version_main }}
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}${{ steps.version_pr.outputs.version_pr }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-    steps:
-      - name: Generate Development build version
-        shell: bash
-        id: version_dev
-        run: |
-          version_dev="dev$(date --utc +'%Y%m%d')"
-          echo "Development version \"${version_dev}\""
-          echo "::set-output name=version_dev::${version_dev}"
-      - name: Generate Development build version for PR
-        if: ${{ github.event.pull_request }}
-        shell: bash
-        id: version_pr
-        run: |
-          version_pr=$(printf "%05d" ${{ github.event.pull_request.number }})
-          echo "Development build for PR #${{ github.event.pull_request.number }}"
-          echo "::set-output name=version_pr::${version_pr}"
-      - uses: actions/checkout@v2
-      - name: Get Major/Minor version
-        id: version_main
-        run: |
-          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
-          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          echo "::set-output name=version_main::${major}.${build}"
-      - name: Create build matrix
-        uses: actions/github-script@v4
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-
-            if (context.eventName == "workflow_dispatch") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            }
-
-            const labels = context.payload.pull_request.labels.map(l => l.name)
-            const labelsSet = new Set(labels)
-            const buildBoards = boards.filter(b => labelsSet.has(b.label))
-
-            return { "board": buildBoards }
-
-  build:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Development build for ${{ matrix.board.id }}
-    environment: "dev_build"
-    needs: prepare
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
-    runs-on: ${{ matrix.board.runner }}
-
-    steps:
-      - name: Define git reference
-        uses: actions/github-script@v4
-        id: generate_gitref
-        with:
-          script: |
-            if (context.eventName == "workflow_dispatch")
-              return { "ref": context.ref }
-            return { "ref": context.payload.pull_request.head.sha }
-
-      # Make sure directories of potentially removed submodules are cleaned correctly
-      - name: Cleanup git submodules
-        run: find . -name .git -type f -exec rm {} \;
-
-      - name: Checkout source
-        uses: actions/checkout@v2
-        with:
-          submodules: true
-          persist-credentials: false
-          ref: ${{ fromJSON(steps.generate_gitref.outputs.result).ref }}
-
-      - name: Build container
-        run: docker build -t haos-builder .
-
-      - name: 'Add release PKI certs'
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Build
-        run: |
-          BUILDER_UID="$(id -u)"
-          BUILDER_GID="$(id -g)"
-          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
-            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-            -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.prepare.outputs.version_dev }} ${{ matrix.board.defconfig }}
-
-      - name: Upload images
-        uses: burnett01/rsync-deployments@4.1
-        with:
-          rsh: -q
-          switches: -aW --ignore-existing
-          path: release/
-          remote_path: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}/
-          remote_host: ${{ secrets.DEV_HOST }}
-          remote_port: ${{ secrets.DEV_PORT }}
-          remote_user: ${{ secrets.DEV_USERNAME }}
-          remote_key: ${{ secrets.DEV_SSH_KEY }}
-
-  bump_version:
-    name: Bump dev channel version
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [ build, prepare ]
-    runs-on: [ "ubuntu-20.04" ]
-
-    steps:
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS dev channel version to ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
-        channel: "dev"

.github/workflows/label-actions.yml

@@ -1,17 +0,0 @@
-name: 'Label Actions'
-
-on:
-  issues:
-    types: [labeled, unlabeled]
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-  discussions: write
-
-jobs:
-  action:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/label-actions@v2

.github/workflows/matrix.json

@@ -1,80 +0,0 @@
-[
-  {
-    "id": "ova",
-    "defconfig": "ova",
-    "runner": "x86-64-runner",
-    "label": "board/ova"
-  },
-  {
-    "id": "generic-x86-64",
-    "defconfig": "generic_x86_64",
-    "runner": "x86-64-runner",
-    "label": "board/generic-x86-64"
-  },
-  {
-    "id": "khadas-vim3",
-    "defconfig": "khadas_vim3",
-    "runner": "aarch64-runner",
-    "label": "board/khadas"
-  },
-  {
-    "id": "odroid-c2",
-    "defconfig": "odroid_c2",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-c4",
-    "defconfig": "odroid_c4",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-n2",
-    "defconfig": "odroid_n2",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-xu4",
-    "defconfig": "odroid_xu4",
-    "runner": "aarch64-runner",
-    "label": "board/odroid"
-  },
-  {
-    "id": "rpi2",
-    "defconfig": "rpi2",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3",
-    "defconfig": "rpi3",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3-64",
-    "defconfig": "rpi3_64",
-    "runner": "aarch64-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4",
-    "defconfig": "rpi4",
-    "runner": "arm-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4-64",
-    "defconfig": "rpi4_64",
-    "runner": "aarch64-runner",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "tinker",
-    "defconfig": "tinker",
-    "runner": "arm-runner",
-    "label": "board/tinker"
-  }
-]

.github/workflows/pr-checks.yml

@@ -1,28 +0,0 @@
-# Home Assistant Operating System pull-request checks
-
-name: PR checks
-
-on: [pull_request]
-
-jobs:
-  linters:
-    runs-on: ubuntu-20.04
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v2
-      with:
-        submodules: true
-
-    - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.1.0
-      with:
-        dockerfile: Dockerfile
-
-    - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@1.1.0
-      with:
-        ignore: buildroot buildroot-external/package/xe-guest-utilities
-
-    - name: Check buildroot-external packages
-      run: |
-        buildroot/utils/check-package --exclude PackageHeader --br2-external buildroot-external/package/*/*

.github/workflows/release-drafter.yml

@@ -1,15 +0,0 @@
-name: Release Drafter
-
-on:
-  push:
-    branches:
-      - dev
-      - rel-4
-
-jobs:
-  update_release_draft:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: release-drafter/release-drafter@v5
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -1,184 +0,0 @@
-# Home Assistant Operating System release build workflow
-
-name: Release build
-
-on:
-  release:
-    types: [published]
-
-jobs:
-  validate_release:
-    name: Validate release
-    runs-on: [ "ubuntu-20.04" ]
-    outputs:
-      version: ${{ steps.version_check.outputs.version }}
-      version_dev: ${{ steps.version_check.outputs.version_dev }}
-    steps:
-      - uses: actions/checkout@v2
-      - name: Validate version
-        id: version_check
-        run: |
-          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
-          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          tag_major=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 1)
-          tag_build=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 2)
-          tag_dev=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 3)
-          if [ "${major}.${build}" != "${tag_major}.${tag_build}" ]; then
-            echo "Version number in Buildroot metadata is does not match tag (${major}.${build} vs ${{ github.event.release.tag_name }})."
-            exit 1
-          fi
-          if [ "" != "${tag_dev}" ]; then
-            echo "Note: Release build with custom dev part: ${tag_dev}."
-            echo "::set-output name=version::${major}.${build}.${tag_dev}"
-          else
-            echo "::set-output name=version::${major}.${build}"
-          fi
-          echo "::set-output name=version_dev::${tag_dev}"
-
-  build:
-    name: Release build for ${{ matrix.board.name }}
-    needs: validate_release
-    strategy:
-      matrix:
-        board:
-          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
-          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
-          - {"name": "khadas_vim3", "output": "khadas-vim3", "runner": "aarch64-runner"}
-          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
-          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
-          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
-          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
-          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
-          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
-          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
-          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
-          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
-          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
-    runs-on: ${{ matrix.board.runner }}
-
-    steps:
-      # Make sure directories of potentially removed submodules are cleaned correctly
-      - name: Cleanup git submodules
-        run: find . -name .git -type f -exec rm {} \;
-
-      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
-      - uses: actions/checkout@v2
-        with:
-          submodules: true
-
-      - name: Build container
-        run: docker build -t haos-builder .
-
-      - name: 'Add release PKI certs'
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Build
-        run: |
-          BUILDER_UID="$(id -u)"
-          BUILDER_GID="$(id -g)"
-          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
-            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-            -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.name }}
-
-      - name: Upload disk image
-        if: ${{ matrix.board.name != 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_content_type: application/x-xz
-
-      - name: Upload rauc update
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_content_type: application/octet-stream
-
-      - name: Upload ova image
-        if: ${{ matrix.board.name == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_content_type: application/x-tar
-
-      - name: Upload qcow2 image
-        if: ${{ matrix.board.name == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_content_type: application/x-xz
-
-      - name: Upload vdi image
-        if: ${{ matrix.board.name == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_content_type: application/zip
-
-      - name: Upload vhdx image
-        if: ${{ matrix.board.name == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_content_type: application/zip
-
-      - name: Upload vmdk image
-        if: ${{ matrix.board.name == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_content_type: application/zip
-
-  bump_version:
-    name: Bump dev version to ${{ needs.validate_release.outputs.version }}
-    needs: [ build, validate_release ]
-    runs-on: [ "ubuntu-20.04" ]
-
-    steps:
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS beta version
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.validate_release.outputs.version }}
-        channel: "beta"

.github/workflows/stale.yml

@@ -1,47 +0,0 @@
-name: Stale
-
-# yamllint disable-line rule:truthy
-on:
-  schedule:
-    - cron: "0 * * * *"
-  workflow_dispatch:
-
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    steps:
-      # The 90 day stale policy
-      # Used for:
-      # - Issues & PRs
-      # - No PRs marked as no-stale or pinned
-      # - No issues marked as no-stale, help-wanted or pinned
-      - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v4
-        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 90
-          days-before-close: 7
-          operations-per-run: 150
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,pinned,enhancement"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. To keep our
-            backlog manageable we have to clean old issues, as many of them have
-            already been resolved with the latest updates.
-
-            Please make sure to update to the latest Home Assistant OS version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-          stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale,pinned"
-          stale-pr-message: >
-            There hasn't been any activity on this pull request recently. This
-            pull request has been automatically marked as stale because of that
-            and will be closed if no further activity occurs within 7 days.
-
-            Thank you for your contributions.

.gitignore

@@ -1,4 +1,2 @@
-.DS_Store
 /release
 *.pem
-output*/

.gitmodules

@@ -1,4 +0,0 @@
-[submodule "buildroot"]
-	path = buildroot
-	url = https://github.com/home-assistant/buildroot.git
-	branch = 2021.02.x-haos

.hadolint.yaml

@@ -1,2 +0,0 @@
-ignored:
-  - DL3008

Dockerfile

@@ -1,54 +1,21 @@
-FROM debian:bullseye
-
-# Set shell
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
+FROM ubuntu:16.04
 
 # Docker
-RUN apt-get update && apt-get install -y --no-install-recommends \
+RUN apt-get update && apt-get install -y \
         apt-transport-https \
         ca-certificates \
         curl \
-        gpg-agent \
-        gpg \
-        dirmngr \
         software-properties-common \
-    && curl -fsSL https://download.docker.com/linux/debian/gpg | apt-key add - \
-    && add-apt-repository "deb https://download.docker.com/linux/debian $(lsb_release -cs) stable" \
-    && apt-get update && apt-get install -y --no-install-recommends \
-        docker-ce \
+    && rm -rf /var/lib/apt/lists/* \
+    && curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - \
+    && add-apt-repository "deb https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" \
+    && apt-get update && apt-get install -y docker-ce \
     && rm -rf /var/lib/apt/lists/*
 
-# Build tools
-RUN apt-get update && apt-get install -y --no-install-recommends \
-        bash \
-        bc \
-        binutils \
-        build-essential \
-        bzip2 \
-        cpio \
-        file \
-        git \
-        make \
-        ncurses-dev \
-        patch \
-        perl \
-        python3 \
-        python3-matplotlib \
-        python-is-python3 \
-        graphviz \
-        rsync \
-        sudo \
-        unzip \
-        zip \
-        wget \
-        qemu-utils \
-        openssh-client \
-        vim \
-    && rm -rf /var/lib/apt/lists/*
-
-RUN apt-get update && apt-get install -y --no-install-recommends \
-	skopeo \
-	jq \
+# Build Tools
+RUN apt-get update && apt-get install -y \
+        wget patch vim cpio python unzip rsync bc bzip2 ncurses-dev \
+        git make g++ file perl bash binutils locales qemu-utils \
     && rm -rf /var/lib/apt/lists/*
 
 # Init entry

Documentation/README.md

@@ -1,9 +0,0 @@
-# Documentation
-
-## Contents
-
-- [Configuration](./configuration.md) - how users can configure HAOS
-- [Network](./network.md) - approach to networking
-- [Bluetooth](./bluetooth.md) - approach to bluetooth
-- [Kernel](./kernel.md) - kernel versions
-- [Boards](./boards/README.md) - board specific documentation

Documentation/bluetooth.md

@@ -1,12 +0,0 @@
-# Bluetooth
-
-We support `bluetoothctl` on the host. Later we want to support Bluetooth through the UI.
-All pairs and settings are persistent over reboots and updates.
-
-If you want to setup Bluetooth on the host, use the `bluetoothctl` utility.
-
-## Scan devices
-
-```
-[bluetooth]# scan on
-```

Documentation/boards/README.md

@@ -1,55 +0,0 @@
-# Boards
-
-## Overview
-
-The following boards/devices are supported:
-
-- Raspberry Pi
-  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 32-bit
-  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 64-bit (recommended)
-  - Pi 3 Model B and B+ 32-bit
-  - Pi 3 Model B and B+ 64-bit (recommended)
-  - Pi 2 (not recommended)
-  - Pi Zero-W (not recommended)
-  - Pi (not recommended)
-- Hardkernel
-  - Odroid-C2
-  - Odroid-C4 (_experimental_)
-  - Odroid-N2
-  - Odroid-XU4
-- Generic x86-64 (UEFI, not suited for virtualization)
-  - Intel NUC5CPYH
-  - Intel NUC6CAYH
-  - Intel NUC10I3FNK2
-  - Gigabyte GB-BPCE-3455
-  - Computers supporting x86-64 architecture and UEFI boot should generally work
-- Asus
-  - Tinker Board
-- Virtual appliance (x86_64/UEFI):
-  - VMDK
-  - OVA ?
-  - VHDX ?
-  - VDI ?
-  - QCOW2 ?
-
-Notes:
-  - see ? above: are these currently supported? see ova documentation which explains issues with previous OVA distribution)
-
-## Board specifics
-
-|Board|Build|Config|Docs|
-|-----|----|------|----|
-|Pi4B 32-bit    |`make rpi4`           |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 64-bit    |`make rpi4_64`        |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit    |`make rpi3`           |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit    |`make rpi3_64`        |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2            |`make rpi2`           |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi Zero        |`make rpi0_w`         |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi             |`make rpi`            |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
-|Odroid-C2      |`make odroid_c2`      |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C4      |`make odroid_c4`      |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-N2      |`make odroid_n2`      |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-XU4     |`make odroid_xu4`     |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|Tinker Board   |`make tinker`         |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|Generic x86-64 |`make generic_x86_64` |[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
-|OVA            |`make ova`            |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/asus/README.md

@@ -1,31 +0,0 @@
-# Tinker Board
-
-## Supported Hardware
-
-| Device         | Release Date  | Support | Config   |
-|----------------|---------------|---------|----------|
-| Tinker RK3288  | April 2017    | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
-| Tinker S RK3288| January 2018  | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
-| Tinker Edge T  | November 2019 | no?     |          |
-| Tinker Edge R  | November 2019 | no?     |          |
-
-## eMMC
-
-eMMC support is provided with the same image. Just flash the image to the eMMC by connecting your Tinker Board S to your PC via Micro-USB. Refer to the Tinkerboard documentation how-to flash using Micro-USB and UMS.
-
-The Home Assistant OS provided U-Boot does support UMS as well,
-however manual intervention is necessary:
-
- 1. Set the jumper between Micro-USB and HDMI the maskrom mode
- 2. Insert SD card and connect the board via Micro-USB to your PC
- 3. Continusly press Ctrl+C to interrupt boot
- 4. Set the jumper back to the park position
- 5. Start UMS using:
-```
-ums 0 mmc 0
-```
- 6. A mass storage device should appear. Flash Home Assistant OS to it.
-
-## Serial console
-
-To access the terminal over serial console, add `console=ttyS2,115200` to `cmdline.txt`. GPIO pins are: 34 = GND / 32 = UART TXD / 33 = UART RXD.

Documentation/boards/generic-x86-64/README.md

@@ -1,61 +0,0 @@
-# Generic x86-64
-
-## Supported Hardware
-
-This board configuration aims to support most x86-64 systems with UEFI boot. The
-main aim is to support Intel NUC mini PCs and similar systems. Hardware it has
-been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-
-\* needs 'nomodeset' in cmdline.txt if you want a console
-
-
-## Requirements
-
-- x86-64 support
-- UEFI boot
-- SATA/AHCI or eMMC storage
-- Supported NIC:
-  - Intel Gigabit NIC (e1000, igb - via Linux mainline)
-  - Intel PCIe Gigabit NIC (e1000e - via out-of-tree module in *buildroot-external/package/intel-e1000e*)
-  - Realtek Gigabit NIC (r8169)
-  - Intel Wireless Wifi 802.11ac (iwlwifi, see below)
-
-## Wifi
-
-The following cards are supported:
-
-- Intel Wireless 3160
-- Intel Wireless 7260
-- Intel Wireless 7265
-- Intel Wireless-AC 3165
-- Intel Wireless-AC 3168
-- Intel Wireless-AC 8260
-- Intel Wireless-AC 8265
-- Intel Wireless-AC 9260
-- Intel Wireless-AC 9461
-- Intel Wireless-AC 9462
-- Intel Wireless-AC 9560
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live environment using PXE or USB
-- Copy or download the Home Assistant OS image into your live environment
-- unxz the image and dd to the local hard disk
-- Reboot

Documentation/boards/hardkernel/README.md

@@ -1,26 +0,0 @@
-# ODROID
-
-## Supported Hardware
-
-| Device         | Release Date  | Support      | Config    |
-|----------------|---------------|--------------|-----------|
-| ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
-| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
-| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
-
-See separate documentation for each board.
-
-## Connectivity devices
-
-### Wi-Fi
-
-The following devices have been tested on Home Assistant OS 5.8:
-
-- [Bluetooth Module 2](https://www.hardkernel.com/shop/bluetooth-module-2/)
-- [WiFi Module 3](https://www.hardkernel.com/shop/wifi-module-3/)
-
-The [WiFi Module 5A](https://www.hardkernel.com/shop/wifi-module-5a/) is not
-recommended as there is no upstream driver support available. The driver
-currently compatible with recent Linux kernel version seems to have issues
-connecting to 5GHz networks.

Documentation/boards/hardkernel/odroid-c2.md

@@ -1,22 +0,0 @@
-# Odroid-C2
-
-## eMMC
-
-eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card.
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter.
-eg. `console=ttyAML0,115200n8 console=tty0`
-
-## USB
-
-A long-standing kernel bug currently results in some odd behavior. To use the USB, a device must be plugged into one of the USB ports at hard boot. If all devices are removed from the USB ports, the USB will cease to function until a reboot.
-
-### OTG
-
-The OTG USB is untested.
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c2/hardware/expansion_connectors).

Documentation/boards/hardkernel/odroid-c4.md

@@ -1,16 +0,0 @@
-# Odroid-C4
-
-## Experimental
-
-Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
-
-Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
-
-Common C4 issues that have been specifically tested and appear to be working:
-- boot from SD
-- boot from eMMC
-- MAC address obtained from eFuse
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c4/hardware/expansion_connectors).

Documentation/boards/hardkernel/odroid-n2.md

@@ -1,18 +0,0 @@
-# Odroid-N2
-
-## eMMC
-
-eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card.
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter.
-eg. `console=ttyAML0,115200n8 console=tty0`
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-n2/hardware/expansion_connectors).
-At this point not all functionality is supported by the upstream kernel used
-by Home Assistant OS.
-
-The GPIO on pin 11 is used as a low active power button input.

Documentation/boards/hardkernel/odroid-xu4.md

@@ -1,29 +0,0 @@
-# ODROID-XU4
-
-## eMMC
-
-The ODROID XU4 uses the eMMC boot partition to boot from. Typically eMMC readers can't write to this eMMC boot partition. There are a couple of possibilities:
-
-1. **Working** e.g. the eMMC already had a working image before flashing HassOS:
-   - It will be booting to U-Boot (but no further).
-     - If you have the serial adapter, you should be able to enter `distro_bootcmd` at the uboot prompt to continue booting.
-     - If not, flash the HassOS image to an SD card and boot off that temporarily (while the eMMC is also plugged in).
-   - Once booted, login at the prompts and then enter `dd if=/dev/mmcblk0 of=/dev/mmcblk0boot0 bs=512 skip=63 seek=62 count=1440` at the linux prompt.
-   - Reboot with eMMC (don't forget to flip the boot switch to eMMC)
-2. **Not Working** e.g. a clean/wiped/corruped eMMC boot partition:
-   - You'll need to follow [Hardkernel's instructions](https://forum.odroid.com/viewtopic.php?f=53&t=6173) to get a working boot sector. Then flash HassOS and follow instructions above.
-   - Alternatively, you can try flash HassOS to both an SD and eMMC, then boot off the SD with the eMMC also plugged in, then run `dd if=/dev/mmcblk1 of=/dev/mmcblk0boot0 bs=512 skip=1 seek=0 count=16381` at the Linux prompt. Note that this is untested, but in theory should work..
-
-If you are getting permissions issues when using the dd command, try disabling RO:
-`echo 0 > /sys/block/mmcblk0boot0/force_ro`
-to re-enable after running dd:
-`echo 1 > /sys/block/mmcblk0boot0/force_ro`
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the SAC2 console if you don't plan on using the serial adapter.
-eg. `console=tty1 console=ttySAC2,115200`
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-xu4/hardware/expansion_connectors).

Documentation/boards/ova.md

@@ -0,0 +1,16 @@
+# OVA
+
+The OVA stay for open virtual appliance. Currently we had remove the ova files and publish a vmdk virtual disk,
+until we have better OVF template to generate our OVA. This vmdk work with (maybe you need convert the disk):
+- HyperV
+- VirtualBox
+- VMware
+
+## Virtual Machine
+
+You can use this vmdk in a virtual machine with follow requirements:
+- OS: Linux 64bit
+- UEFI boot
+- min. 1GB RAM
+- 2x vcpu
+- 1x Network

Documentation/boards/ova/README.md

@@ -1,22 +0,0 @@
-# Virtual Machine
-
-## Supported Hypervisors
-
-| Hypervisor          | Vendor    | Support         | Config             |
-|---------------------|-----------|-----------------|--------------------|
-| HyperV              | Microsoft | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-| VirtualBox          | Oracle    | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-| VMware              | VMware    | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-
-Currently we only publish a VMDK virtual disk due to issues with our previous OVA distribution. We are investigating our options to bring back the OVA distribution, however, the VMDK works for the hypervisors listed above.
-
-## Requirements
-
-Using this VMDK in a virtual machine requires the following:
-
-- Operating system: Other 4.x or later Linux (64-bit)
-- Enabled support for UEFI boot
-- SATA disk controller
-- Minimal of 1GB RAM
-- At least 2x vCPU
-- An assigned network

Documentation/boards/raspberrypi.md

@@ -0,0 +1,5 @@
+# Raspberry PI
+
+## Serial console
+
+For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.

Documentation/boards/raspberrypi/README.md

@@ -1,58 +0,0 @@
-# Raspberry PI
-
-## Supported Hardware
-
-| Device              | Release Date  | Support         | Config             |
-|---------------------|---------------|-----------------|--------------------|
-| Raspberry Pi B/B+/A+|2012/2014/2014 | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
-| Raspberry Pi 2 B    |2015           | not recommended | [rpi2](../../../buildroot-external/configs/rpi2_defconfig)             |
-| Raspberry Pi Zero   |2015           | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
-| Raspberry Pi Zero W |2017           | not recommended | [rpi0_w](../../../buildroot-external/configs/rpi0_w_defconfig)           |
-| Raspberry Pi 3 B/B+ |2016/2018      | yes             | [rpi3](../../../buildroot-external/configs/rpi3_defconfig) / [rpi3_64](../../../buildroot-external/configs/rpi3_64_defconfig) |
-| Raspberry Pi 4 B    |2019           | yes*            | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
-
-\*1,2 and 4 GiB versions of the Raspberry Pi 4 B are supported. Support for the 8 GiB version is coming soon is part of #740.
-
-## Limitation 64bit
-
-The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
-
-## Serial console
-
-For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1`, `dtoverlay=pi3-disable-bt` into `config.txt`. GPIO pins are: 6 = GND / 8 = UART TXD / 10 = UART RXD.
-
-## I2C
-
-Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`.
-
-rpi-i2c.conf:
-```
-i2c-dev
-i2c-bcm2708
-```
-
-## USB Boot
-
-USB mass storage boot is available on Raspberry Pi 4 (64-bit only), 3B, 3B+, 3A+, and 2B v1.2.
-
-For Raspberry 3B, 3A+ and 2B v1.2, to enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
-
-For Raspberry 4
-
-* Make sure to update the bootloader to a stable release supporting USB mass storage boot (see [bcm2711_bootloader_config.md](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md#usbmassstorageboot)). 
-* If no SD card is used add `sd_poll_once=on` to `dtparam` in `config.txt` (comma separated). This gets rid of `mmc0: timeout waiting for hardware interrupt` kernel errors.
-* If install still fails, then your SSD likely needs quirks enabled to work correctly (see [Finding the VID and PID of your USB SSD](https://www.raspberrypi.org/forums/viewtopic.php?t=245931)). Once you find your adapter's ID, add the quirks parameter in `cmdline.txt`. 
-
-For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
-
-### Caveats
-
-* All bootable SD cards must be removed.
-* Boot time can be significantly longer with USB. This is due to the boot process first attempting to boot from SD card, failing, and resorting to USB.
-* Many USB drives simply do not work for boot. This is likely due to minimal driver support in uboot and will not be fixed. If you can't get it to boot on one drive, try a different brand/model. SanDisk Cruzer drives seem to have a higher rate of issues.
-
-## Tweaks
-
-If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
-
-[config]: ../../configuration.md#automatic

Documentation/build.md

@@ -0,0 +1,21 @@
+# Building
+
+Running `sudo ./enter.sh` will get you into the build Docker container.   
+`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+
+## Scripts
+
+
+
+## Helpers
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig`
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config`

Documentation/configuration.md

@@ -2,61 +2,39 @@
 
 ## Automatic
 
-You can use an USB drive with HassOS to configure network options, SSH access to the host and to install updates.
-Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG` (in all capitals). Alternative you can create a `CONFIG` folder inside the `boot` partition. Use the following directory structure within the USB drive:
+You can use a USB drive with HassOS to configure network options, ssh access to the host, and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Use the following directory structure within the USB drive:
 
-```text
+```
 network/
 modules/
-modprobe/
-udev/
 authorized_keys
-timesyncd.conf
 hassos-xy.raucb
 ```
 
-- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md].
+- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
 - The `modules` folder is for modules-load configuration files.
-- The `modprobe` folder is for modules configuration files (/etc/modprobe.d)
-- The `udev` folder is for udev rules files.
-- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Home Assistant][debug-homeassistant].
-- The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
-- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page.
+- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 
 
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
-API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*
+You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host.
 
 ## Local
 
 ### Bootargs
 
-You can edit or create a `cmdline.txt` in your boot partition. That will be read from the bootloader.
+You can edit or create a `cmdline.txt` into your boot partition. That will be read from our bootloader.
 
 ### Kernel-Module
 
-The kernel module folder `/etc/modules-load.d` is persistent and you can add your configuration files there. See [Systemd modules load][systemd-modules]. You can add the modules configuration files in `/etc/modprobe.d` that is also persistent.
-
-### Udev rules
-
-The udev rules folder `/etc/udev/rules.d` is persistent and you can add your configuration files there.
+The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].
 
 ### Network
 
-You can manual add, edit or remove connections configurations from `/etc/NetworkManager/system-connections`.
-
-### NTP
-
-You can manual edit the systemd timesync file on `/etc/systemd/timesyncd.conf`.
-
-Our default NTP configuration look like:
-
-```
-[Time]
-NTP=time1.google.com time2.google.com time3.google.com
-FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
-```
+You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.
 
 [systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
 [network.md]: network.md
 [hassos-release]: https://github.com/home-assistant/hassos/releases/
-[debug-homeassistant]: https://developers.home-assistant.io/docs/operating-system/debugging
+[debug-hassio]: https://developers.home-assistant.io/docs/en/hassio_debugging.html

Documentation/deployment.md

@@ -0,0 +1,23 @@
+# Deployment
+
+We know 3 types of release builds:
+- development (beta/dev)
+- staging (rc)
+- production (stable)
+
+## Versioning
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development use here own major number they will be bump for the stable version and the development version go to next major number.
+
+```
+0.x = development
+1.x = stable
+2.x = development
+3.x = stable
+```
+
+## GIT Branch/Tag
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch hould the development
+version from they we build a beta release.
+
+If we create a new staging/productive release, we create a new branch `rel-{MAJOR}`. They will be used for the hole cycle of this release.

Documentation/kernel.md

@@ -1,19 +0,0 @@
-
-# Kernel Version
-
-Default Kernel tree: 5.10
-
-| Board | Version |
-|-------|---------|
-| Open Virtual Appliance | 5.10.96 |
-| Raspberry Pi | 5.10.92 |
-| Raspberry Pi 0-W | 5.10.92 |
-| Raspberry Pi 2 | 5.10.92 |
-| Raspberry Pi 3 | 5.10.92 |
-| Raspberry Pi 4 | 5.10.92 |
-| Tinker Board | 5.10.96 |
-| Odroid-C2 | 5.10.96 |
-| Odroid-C4 | 5.10.96 |
-| Odroid-N2 | 5.10.96 |
-| Odroid-XU4 | 5.10.96 |
-| Generic x86-64 | 5.10.96 |

Documentation/network.md

@@ -1,52 +1,20 @@
 # Network
 
-Home Assistant Operating System uses NetworkManager to control the host network.
+HassOS uses NetworkManager to control the host network. In future releases, you can set up the configuration using the API/UI.
+Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
 
-## Configure network
+## Configuration Examples
 
-By default the device will be in DHCP state.
-
-Basic network settings can be set through the Supervisor frontend in the System
-tab. Advanced configurations such as VLAN are also available through the
-`ha network` CLI command.
-
-To restore the default configuration the `ha network` CLI command can be used as
-well:
-
-```
-ha network update default --ipv4-method auto
-```
-
-If more advanced network settings are required network connection files can be
-placed on a USB drive and imported to the host as described in
-[Configuration][configuration-usb].
-
-## Manual Network Configuration
-
-If the frontend or `ha network` CLI cannot meet your use case, it is still
-possible to configure the underlying NetworkManager manually.
-
-You can read the [NetworkManager manual][nm-manual] or find many configuration
-examples across the internet. Note that changes to `NetworkManager.conf` are
-not supported currently, only connection keyfiles are supported. Keep in mind
-that the system is read-only. If you don't want the IP address to change on
-every boot, you should modify the UUID property to a generic [UUID4][uuid].
-Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a
-file called `my-network` and add the appropriate contents below:
-
-**NOTE: Please make sure to save this file with UNIX line endings (LF, and not Windows' default CRLF endings). You can do this using Notepad these days!**
+You can look also into [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you not want change the IP address every boot, you should set the uuid property with a generic [UUID4][uuid].
 
 ### Default
 
-A preinstalled connection profile for wired network is active by default:
-
-```ini
+We have a preinstalled connection profile:
+```
 [connection]
-id=Home Assistant OS default
+id=HassOS default
 uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
 type=802-3-ethernet
-llmnr=2
-mdns=2
 
 [ipv4]
 method=auto
@@ -56,15 +24,12 @@ addr-gen-mode=stable-privacy
 method=auto
 ```
 
-### Wired connection to the LAN
-
+### LAN
 ```ini
 [connection]
-id=my-network
+id=hassos-network
 uuid=d55162b4-6152-4310-9312-8f4c54d86afa
 type=802-3-ethernet
-llmnr=2
-mdns=2
 
 [ipv4]
 method=auto
@@ -74,24 +39,21 @@ addr-gen-mode=stable-privacy
 method=auto
 ```
 
-### Wireless LAN WPA/PSK
-
+### Wireless WPA/PSK
 ```ini
 [connection]
-id=my-network
+id=hassos-network
 uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
 type=802-11-wireless
 
-[802-11-wireless]
+[wifi]
 mode=infrastructure
 ssid=MY_SSID
-# Uncomment below if your SSID is not broadcasted
-#hidden=true
 
-[802-11-wireless-security]
+[wifi-security]
 auth-alg=open
 key-mgmt=wpa-psk
-psk=MY_WLAN_SECRET_KEY
+psk=MY_WLAN_SECRED_KEY
 
 [ipv4]
 method=auto
@@ -103,83 +65,34 @@ method=auto
 
 ### Static IP
 
-Replace the following configuration:
-
+Replace follow configs:
 ```ini
 [ipv4]
 method=manual
-address=192.168.1.111/24;192.168.1.1
+address1=192.168.1.111/24,192.168.1.1
 dns=8.8.8.8;8.8.4.4;
 ```
 
-For `address`, the value before the semicolon is the IP address and subnet prefix bitlength. The second value (after the semicolon) is the IP address of the local gateway.
-
 ## Tips
 
 ### Reset network
 
-If you want to reset the network configuration back to the default connection
-profile using DHCP, use the following commands on the host console:
-
+If you want reset the network configuration to default, use follow commands on host:
 ```bash
-# rm -r /mnt/overlay/etc/NetworkManager/system-connections
-# reboot
+$ rm /etc/NetworkManager/system-connections/*
+$ cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
+$ nmcli con reload
 ```
 
-Home Assistant OS will recreate the default connection profile during boot.
-
 ### Powersave
 
-If you have trouble with powersave then apply the following changes:
-
+If you have trouble with powersave you can do following:
 ```ini
 [wifi]
 # Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
 powersave=0
 ```
 
-## Using `nmcli` to set a static IPv4 address
-
-Log into the the Home Assistant OS base system via a console:
-
-```bash
-Welcome to Home Assistant
-homeassistant login:
-```
-
-- Login as `root` (no password needed). At the `ha >` prompt, type `login` (as instructed).
-
-From there you use the `nmcli` configuration tool.
-
-- `# nmcli con show` will list the "Home Assistant OS default" connection in use.
-- `# nmcli con show "Home Assistant OS default"` will list all the properties of the connection.
-
-To start editing the configuration setting for "Home Assistant OS default":
-
-```bash
-# nmcli con edit "Home Assistant OS default"
-```
-
-To add your static IP address (select 'yes' for manual method);
-
-```bash
-nmcli> set ipv4.addresses 192.168.100.10/24
-Do you also want to set 'ipv4.method' to 'manual'? [yes]:
-```
-
-In addition, it's recommended to set the DNS server and the local gateway. For most home routers the DNS server will have the same IP address as the router itself. If you are using Pi-Hole or a third-party DNS system then you can set the DNS server to that.
-
-```bash
-nmcli> set ipv4.dns 192.168.100.1
-nmcli> set ipv4.gateway 192.168.100.1
-```
-
-`nmcli> print ipv4` will show you the IPv4 properties of this connection. With `nmcli> save` you will save the changes afterwards.
-
-If you now view the default connection `cat /etc/NetworkManager/system-connections/default` you should see the method is manual and the address is set.
-
-Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.
-
-[nm-manual]: https://developer.gnome.org/NetworkManager/stable/manpages.html
+[keyfile]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
 [configuration-usb]: configuration.md
 [uuid]: https://www.uuidgenerator.net/

Makefile

@@ -1,53 +0,0 @@
-BUILDDIR:=$(shell pwd)
-RELEASE_DIR = $(BUILDDIR)/release
-
-BUILDROOT=$(BUILDDIR)/buildroot
-BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
-DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
-VERSION_DATE := $(shell date --utc +'%Y%m%d')
-VERSION_DEV := "dev$(VERSION_DATE)"
-
-TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-
-# Set O variable if not already done on the command line
-ifneq ("$(origin O)", "command line")
-O := $(BUILDDIR)/output
-else
-override O := $(BUILDDIR)/$(O)
-endif
-
-.NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) all
-
-.PHONY: $(TARGETS) $(TARGETS_CONFIG) all clean help
-
-all: $(TARGETS)
-
-$(RELEASE_DIR):
-	mkdir -p $(RELEASE_DIR)
-
-$(TARGETS_CONFIG): %-config:
-	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
-
-$(TARGETS): %: $(RELEASE_DIR) %-config
-	@echo "build $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
-	cp -f $(O)/images/haos_* $(RELEASE_DIR)/
-
-	# Do not clean when building for one target
-ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)
-	@echo "clean $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
-endif
-	@echo "finished $@"
-
-clean:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
-
-help:
-	@echo "Supported targets: $(TARGETS)"
-	@echo "Run 'make <target>' to build a target image."
-	@echo "Run 'make all' to build all target images."
-	@echo "Run 'make clean' to clean the build output."
-	@echo "Run 'make <target>-config' to configure buildroot for a target."

README.md

@@ -1,58 +1,14 @@
-# Home Assistant Operating System
+# HassOS
+Hass.io OS based on [buildroot](https://buildroot.org/). It's a hypervisor for Docker and supports various kind of IoT hardware. It is also available as virtual appliance. The whole system is optimized for embedded system and  security. You can update the system simple with OTA updates or offline updates.
 
-Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
+## Focus
 
-Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
-
-## Features
-
-- Lightweight and memory-efficient
-- Minimized I/O
-- Over The Air (OTA) updates
-- Offline updates
-- Modular using Docker container engine
-
-## Supported hardware
-
-- Raspberry Pi
-- Hardkernel ODROID
-- Intel NUC
-- Asus Tinker Board
-- Virtual appliances
-
-See the full list and specific models [here](./Documentation/boards/README.md)
-
-## Getting Started
-
-If you just want to use Home Assistant the official [getting started guide](https://www.home-assistant.io/getting-started/) and [installation instructions](https://www.home-assistant.io/hassio/installation/) take you through how to download Home Assistant Operating System and get it running on your machine.
-
-If you're interested in finding out more about Home Assistant Operating System and how it works read on...
-
-## Development
-
-If you don't have experience with embedded systems, Buildroot or the build process for Linux distributions it is recommended to read up on these topics first (e.g. [Bootlin](https://bootlin.com/docs/) has excellent resources).
-
-The Home Assistant Operating System documentation can be found on the [Home Assistant Developer Docs website](https://developers.home-assistant.io/docs/operating-system).
-
-### Components
-
-- **Bootloader:**
-  - [Barebox](https://barebox.org/) for devices that support UEFI
-  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support UEFI
-- **Operating System:**
-  - [Buildroot](https://buildroot.org/) LTS Linux
-- **File Systems:**
-  - [SquashFS](https://www.kernel.org/doc/Documentation/filesystems/squashfs.txt) for read-only file systems (using LZ4 compression)
-  - [ZRAM](https://www.kernel.org/doc/Documentation/blockdev/zram.txt) for `/tmp`, `/var` and swap (using LZ4 compression)
-- **Container Platform:**
-  - [Docker Engine](https://docs.docker.com/engine/) for running Home Assistant components in containers
-- **Updates:**
-  - [RAUC](https://rauc.io/) for Over The Air (OTA) and USB updates
-- **Security:**
-  - [AppArmor](https://apparmor.net/) Linux kernel security module
-
-### Development builds
-
-The Development build GitHub Action Workflow is a manually triggered workflow
-which creates Home Assistant OS development builds. The development builds are
-available at [os-builds.home-assistant.io](https://os-builds.home-assistant.io/).
+- Linux kernel 4.14 (LT)
+- Barebox as bootloader on EFI
+- U-Boot as bootloader on IoT
+- RAUC for OTA updates
+- SquashFS LZ4 as filesystem
+- Docker 18.03.1
+- AppArmor protected
+- ZRAM LZ4 for /tmp, /var, swap
+- Run every supervisor

buildroot-external/Config.in

@@ -1,14 +1,3 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hassos/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"

buildroot-external/board/asus/hassos-hook.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp -t "${BOOT_DATA}" \
-        "${BINARIES_DIR}/boot.scr" \
-        "${BINARIES_DIR}/rk3288-tinker.dtb" \
-        "${BINARIES_DIR}/rk3288-tinker-s.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-
-    echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=8192
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}

buildroot-external/board/asus/tinker/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/asus/tinker/meta

@@ -1,10 +0,0 @@
-BOARD_ID=tinker
-BOARD_NAME="Asus TinkerBoard"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=zImage
-BOOT_SYS=hybrid
-BOOT_SPL=true
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=tinker
-SUPERVISOR_ARCH=armv7

buildroot-external/board/asus/tinker/patches/README.md

@@ -1,5 +0,0 @@
-## Kernel
-https://github.com/armbian/build/tree/master/patch/kernel/rockchip-next
-
-## u-boot
-https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-rockchip/board_tinkerboard

buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch

@@ -1,64 +0,0 @@
-From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
-Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:03:26 +0100
-Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
-
-The most essential being the RTS pin, which is clearly needed to
-upload the initial configuration into the Realtek Bluetooth
-chip, and make the Bluetooth chip work.
-
-Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
-I'll see how I do that through the DTS file in a near future.
-
-The 3 GPIOS being :
-Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
-Bluetooth Wake  : <&gpio4 26 GPIO_ACTIVE_HIGH>
-Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
-
-These are currently setup manually, through scripts. But it seems that
-GPIO handling through /sys entries might not be possible in the long
-term, the replacement being libgpio.
-Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
-here are the commands :
-
-cd /sys/class/gpio &&
-echo 146 > export &&
-echo 149 > export &&
-echo 151 > export &&
-echo high > gpio146/direction &&
-echo high > gpio149/direction &&
-echo high > gpio151/direction
-
-Resetting the chip is done like this :
-
-echo "Resetting the Bluetooth chip"
-cd /sys/class/gpio/gpio149 &&
-echo 0 > value &&
-sleep 1 &&
-echo 1 > value &&
-sleep 1
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
-[move change to rk3288-tinker.dtsi]
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index acfaa12ec239..284e7982925d 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -492,6 +492,8 @@ &tsadc {
- };
- 
- &uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
- 	status = "okay";
- };
- 
--- 
-2.28.0
-

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,55 +0,0 @@
-From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
-Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 17 Feb 2021 19:55:41 +0100
-Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
- RK3288"
-
-This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
----
- arch/arm/boot/dts/rk3288.dtsi | 8 --------
- 1 file changed, 8 deletions(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 8fa80facc8cd..8636d95c45e1 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart0_xfer>;
- 		status = "disabled";
-@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart1_xfer>;
- 		status = "disabled";
-@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart3_xfer>;
- 		status = "disabled";
-@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart4_xfer>;
- 		status = "disabled";
--- 
-2.30.1
-

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,55 +0,0 @@
-From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
-Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
-In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
-References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface
-
-Taken from, and tested by @TonyMac32 .
-
-Well, the original one was tested by him but I had to adapt the
-registers definitions to the new 64-bits LPAE-compliant syntax.
-
-Therefore that *might* break, along with a few other patches.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
-[move change to rk3288-tinker.dtsi]
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 284e7982925d..d6cc66ab5bb1 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -485,6 +485,25 @@ &sdio0 {
- 	status = "okay";
- };
- 
-+&spi2 {
-+	max-freq = <50000000>;
-+	status = "okay";
-+
-+	spidev@0 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x0 0>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+
-+	spidev@1 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x1>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
--- 
-2.28.0
-

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,41 +0,0 @@
-From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
-Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
-In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
-References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
-
-Enable I2C devices which are accessible via 40-pin header.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index d6cc66ab5bb1..7af5818ac77c 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -344,10 +344,18 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2c1 {
-+	status = "okay";
-+};
-+
- &i2c2 {
- 	status = "okay";
- };
- 
-+&i2c4 {
-+	status = "okay";
-+};
-+
- &i2c5 {
- 	status = "okay";
- };
--- 
-2.28.0
-

buildroot-external/board/asus/tinker/patches/linux/1007-RK3288-DTSI-rk3288-Add-missing-SPI2-pinctrl.patch

@@ -1,31 +0,0 @@
-From 062488e4b8fd552c01e1104b3bc91a6f7ffe6c41 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH 10/28] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
-
-The spi2_cs1 pin reference is missing in the spi2 first pin control
-definition.
-
-This patch is taken from the patches provided by the ARMbian team.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 5b789528..9ed532cc 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -334,7 +334,7 @@
- 		dma-names = "tx", "rx";
- 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
- 		reg = <0x0 0xff130000 0x0 0x1000>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--- 
-2.11.0
-

buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

@@ -1,98 +0,0 @@
-From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 21:58:56 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
-
-Adding the appropriate nodes in order to exploit the WiFi capabilities
-of the board.
-Since these capabilities are provided through SDIO, and the SDIO
-nodes were not defined, these were added too.
-
-These seems to depend on each other so they are added in one big
-patch.
-
-Split if necessary.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
-index 1e43527aa..d4df13bed 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dts
-+++ b/arch/arm/boot/dts/rk3288-tinker.dts
-@@ -6,8 +6,70 @@
- /dts-v1/;
- 
- #include "rk3288-tinker.dtsi"
-+#include <dt-bindings/clock/rockchip,rk808.h>
- 
- / {
- 	model = "Rockchip RK3288 Asus Tinker Board";
- 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-+
-+	/* This is essential to get SDIO devices working.
-+	   The Wifi depends on SDIO ! */
-+	sdio_pwrseq: sdio-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rk808 RK808_CLKOUT1>;
-+		clock-names = "ext_clock";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
-+
-+		/*
-+		 * On the module itself this is one of these (depending
-+		 * on the actual card populated):
-+		 * - SDIO_RESET_L_WL_REG_ON
-+		 * - PDN (power down when low)
-+		 */
-+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	wireless-wlan {
-+		compatible = "wlan-platdata";
-+		rockchip,grf = <&grf>;
-+		sdio_vref = <1800>;
-+		status = "okay";
-+		wifi_chip_type = "8723bs";
-+		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&io_domains {
-+	wifi-supply = <&vcc_18>;
-+};
-+
-+&pinctrl {
-+	sdio-pwrseq {
-+		wifi_enable_h: wifienable-h {
-+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		chip_enable_h: chip-enable-h {
-+			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+};
-+
-+&sdio0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cap-sdio-irq;
-+	clock-frequency = <50000000>;
-+	clock-freq-min-max = <200000 50000000>;
-+	disable-wp;
-+	keep-power-in-suspend;
-+	mmc-pwrseq = <&sdio_pwrseq>;
-+	non-removable;
-+	num-slots = <1>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-+	sd-uhs-sdr104;
-+	status = "okay";
-+	supports-sdio;
- };
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,28 +0,0 @@
-From ebc29962ac27264772a4227f5abd6900cb72fa79 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:16:05 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
-
-Taken from the various patches provided by @TonyMac32 .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index aa107ee41..3da1c830f 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -164,7 +164,7 @@
- 				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <750000>;
--				regulator-max-microvolt = <1400000>;
-+				regulator-max-microvolt = <1450000>;
- 				regulator-name = "vdd_arm";
- 				regulator-ramp-delay = <6000>;
- 				regulator-state-mem {
--- 
-2.16.4
-

buildroot-external/board/asus/tinker/patches/linux/2005-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard.patch

@@ -1,116 +0,0 @@
-From 302cd9b8a9f1f8a7735fabea3b9a7645dc40f9cc Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Sun, 7 Jan 2018 01:52:44 +0100
-Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
-
-On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
-rebooting, the system will be dead, as the SDMMC is the only way to
-boot anything, and the hardware doesn't power up the SDMMC hardware
-automatically when rebooting.
-
-So, when using an ASUS Tinkerboard system, a new reboot handler is
-installed. This reboot handler takes care of powering the SDMMC
-hardware again before restarting the system, resolving the issue.
-
-The code was inspired by the pwrseq_emmc.c, which seems to overcome
-similar effects with eMMC hardware.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
-diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index a3f1c2b30..7eac1f221 100644
---- a/drivers/mmc/host/dw_mmc-rockchip.c
-+++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -16,6 +16,11 @@
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- 
-+#include <linux/regulator/consumer.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include "../core/core.h"
-+
- #include "dw_mmc.h"
- #include "dw_mmc-pltfm.h"
- 
-@@ -334,6 +339,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
- };
- MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
- 
-+struct dw_mci_rockchip_broken_boards_data {
-+	struct notifier_block reset_nb;
-+	struct platform_device *pdev;
-+};
-+
-+/* This reboot handler handles cases where disabling the SDMMC on
-+ * reboot will cause the hardware to be unable to start correctly
-+ * after rebooting.
-+ * 
-+ * This happens with Tinkerboard systems...
-+ */
-+static int dw_mci_rockchip_broken_boards_reset_nb(
-+	struct notifier_block *this,
-+	unsigned long mode, void *cmd)
-+{
-+	struct dw_mci_rockchip_broken_boards_data const *data =
-+		container_of(this,
-+			struct dw_mci_rockchip_broken_boards_data,
-+			reset_nb);
-+	struct dw_mci *host = platform_get_drvdata(data->pdev);
-+	struct mmc_host *mmc = host->slot->mmc;
-+
-+	printk(KERN_ERR "Meow.\n");
-+
-+	mmc_power_off(mmc);
-+
-+	mdelay(20);
-+
-+	if (!IS_ERR(mmc->supply.vmmc))
-+		regulator_enable(mmc->supply.vmmc);
-+
-+	if (!IS_ERR(mmc->supply.vqmmc))
-+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
-+
-+	printk(KERN_ERR "woeM.\n");
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
-+	struct platform_device *pdev)
-+{
-+	struct dw_mci_rockchip_broken_boards_data *data;
-+
-+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
-+		return;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return;
-+
-+	data->reset_nb.notifier_call =
-+		dw_mci_rockchip_broken_boards_reset_nb;
-+	data->reset_nb.priority = 255;
-+	register_restart_handler(&data->reset_nb);
-+
-+	data->pdev = pdev;
-+}
-+
- static int dw_mci_rockchip_probe(struct platform_device *pdev)
- {
- 	const struct dw_mci_drv_data *drv_data;
-@@ -361,6 +426,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
- 	}
- 
- 	pm_runtime_put_autosuspend(&pdev->dev);
-+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
- 
- 	return 0;
- }
--- 
-2.14.1
-

buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch

@@ -1,19 +0,0 @@
-diff --git a/sound/usb/card.c b/sound/usb/card.c
-index 2bfe4e80a..cea93aaf5 100644
---- a/sound/usb/card.c
-+++ b/sound/usb/card.c
-@@ -382,6 +382,14 @@ static void usb_audio_make_shortname(struct usb_device *dev,
- 	}
- 
- 	strim(card->shortname);
-+
-+	/* Tinker Board ALC4040 CODEC	*/
-+
-+	if(USB_ID_VENDOR(chip->usb_id) == 0x0bda &&
-+		USB_ID_PRODUCT(chip->usb_id) == 0x481a) {
-+			strlcat(card->shortname, " OnBoard", sizeof(card->shortname));
-+	}
-+	
- }
- 
- static void usb_audio_make_longname(struct usb_device *dev,

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -1,37 +0,0 @@
-From e18419a214ba872d14462354886148f976312e3c Mon Sep 17 00:00:00 2001
-Message-Id: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 12:41:50 +0000
-Subject: [PATCH 1/2] SPL: modify load address of U-Boot
-
-Default load address of U-Boot is at sector 16384, which is where HAOS
-has its first partition. Use 0x2000 (8192) instead.
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- configs/tinker-rk3288_defconfig   | 1 +
- configs/tinker-s-rk3288_defconfig | 1 +
- 2 files changed, 2 insertions(+)
-
-diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index 3ac314ab89..67ca98c383 100644
---- a/configs/tinker-rk3288_defconfig
-+++ b/configs/tinker-rk3288_defconfig
-@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
- CONFIG_DISPLAY_ROCKCHIP_HDMI=y
- CONFIG_CMD_DHRYSTONE=y
- CONFIG_ERRNO_STR=y
-+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
-diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
-index 35e84b7088..93cfe4f094 100644
---- a/configs/tinker-s-rk3288_defconfig
-+++ b/configs/tinker-s-rk3288_defconfig
-@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
- CONFIG_CONSOLE_SCROLL_LINES=10
- CONFIG_CMD_DHRYSTONE=y
- CONFIG_ERRNO_STR=y
-+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
--- 
-2.33.0
-

buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,68 +0,0 @@
-From 4c09e7741c219ef28be912e97a986b6402290c9b Mon Sep 17 00:00:00 2001
-Message-Id: <4c09e7741c219ef28be912e97a986b6402290c9b.1632758899.git.stefan@agner.ch>
-In-Reply-To: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
-References: <e18419a214ba872d14462354886148f976312e3c.1632758899.git.stefan@agner.ch>
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
----
- board/rockchip/tinker_rk3288/tinker-rk3288.c | 37 ++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-index f85209c649..6fa1bb0c66 100644
---- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
-+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-@@ -13,6 +13,7 @@
- #include <netdev.h>
- #include <asm/arch-rockchip/bootrom.h>
- #include <asm/io.h>
-+#include <power/regulator.h>
- 
- static int get_ethaddr_from_eeprom(u8 *addr)
- {
-@@ -48,3 +49,39 @@ int mmc_get_env_dev(void)
- 
- 	return 1;
- }
-+
-+
-+#ifdef CONFIG_DM_PMIC
-+static int rockchip_set_regulator_on(const char *name, uint uv)
-+{
-+	struct udevice *dev;
-+	int ret;
-+
-+	ret = regulator_get_by_platname(name, &dev);
-+	if (ret) {
-+		debug("%s: Cannot find regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_value(dev, uv);
-+	if (ret) {
-+		debug("%s: Cannot set regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_enable(dev, 1);
-+	if (ret) {
-+		debug("%s: Cannot enable regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+int power_init_board(void)
-+{
-+	int ret = rockchip_set_regulator_on("vcc33_mipi", 3300000);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+#endif
--- 
-2.33.0
-

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -1,96 +0,0 @@
-
-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-if test "$devnum" = "0"; then
-  setenv fdtfile "rk3288-tinker-s.dtb"
-else
-  setenv fdtfile "rk3288-tinker.dtb"
-fi
-
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/asus/tinker/uboot.config

@@ -1,3 +0,0 @@
-# CONFIG_USB_STORAGE is not set
-# CONFIG_DOS_PARTITION is not set
-CONFIG_OF_LIBFDT_OVERLAY=y

buildroot-external/board/hardkernel/odroid-c2/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c2/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
-    local UBOOT_GXBB="${BINARIES_DIR}/u-boot.gxbb"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=1 count=440
-    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=512 skip=1 seek=1
-    dd if="${UBOOT_GXBB}" of="${SPL_IMG}" conv=notrunc bs=512 seek=97
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-c2/meta

@@ -1,10 +0,0 @@
-BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel Odroid-C2"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=mbr
-BOOT_SPL=true
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c2
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -1,104 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-gxbb-odroidc2.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-c2/uboot.config

@@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y

buildroot-external/board/hardkernel/odroid-c4/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c4/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh

@@ -1,26 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local UBOOT_SM1="${BINARIES_DIR}/u-boot.sm1"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${UBOOT_SM1}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -1,10 +0,0 @@
-BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel Odroid-C4"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=mbr
-BOOT_SPL=true
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c4
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -1,104 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-sm1-odroid-c4.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-c4/uboot.config

@@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y

buildroot-external/board/hardkernel/odroid-n2/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-n2/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local UBOOT_G12B="${BINARIES_DIR}/u-boot.g12b"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-	dd if="${UBOOT_G12B}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-n2/kernel.config

@@ -1,7 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y

buildroot-external/board/hardkernel/odroid-n2/meta

@@ -1,10 +0,0 @@
-BOARD_ID=odroid-n2
-BOARD_NAME="Hardkernel Odroid-N2"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=mbr
-BOOT_SPL=true
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-n2
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -1,109 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-if test "${soc_rev}" = "c"; then
-  setenv fdtfile "meson-g12b-odroid-n2-plus.dtb"
-else
-  setenv fdtfile "meson-g12b-odroid-n2.dtb"
-fi
-
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-n2/uboot.config

@@ -1,5 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

buildroot-external/board/hardkernel/odroid-xu4/cmdline.txt

@@ -1 +0,0 @@
-console=tty1 console=ttySAC2,115200

buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
-    local BL2="${BINARIES_DIR}/bl2.bin.hardkernel.720k_uboot"
-    local BLTZ="${BINARIES_DIR}/tzsw.bin.hardkernel"
-    local UBOOT="${BINARIES_DIR}/u-boot.bin"
-    local spl_img="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/exynos5422-odroidxu4.dtb" "${BOOT_DATA}/exynos5422-odroidxu4.dtb"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BL1}" of="${spl_img}" conv=notrunc bs=512 seek=1
-    dd if="${BL2}" of="${spl_img}" conv=notrunc bs=512 seek=31
-    dd if="${UBOOT}" of="${spl_img}" conv=notrunc bs=512 seek=63
-    dd if="${BLTZ}" of="${spl_img}" conv=notrunc bs=512 seek=1503
-    dd if=/dev/zero of="${spl_img}" conv=notrunc bs=512 count=32 seek=2015
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}

buildroot-external/board/hardkernel/odroid-xu4/meta

@@ -1,10 +0,0 @@
-BOARD_ID=odroid-xu4
-BOARD_NAME="Hardkernel Odroid-XU4"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=zImage
-BOOT_SYS=mbr
-BOOT_SPL=true
-BOOT_ENV_SIZE=0x4000
-SUPERVISOR_MACHINE=odroid-xu
-SUPERVISOR_ARCH=armv7

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-Update-hack-avoiding-the-invalid-temperat.patch

@@ -1,61 +0,0 @@
-From d6b82edb420c7df4fa8bb0924dae2476beb649a2 Mon Sep 17 00:00:00 2001
-Message-Id: <d6b82edb420c7df4fa8bb0924dae2476beb649a2.1622398359.git.stefan@agner.ch>
-From: "charles.park" <charles.park@hardkernel.com>
-Date: Fri, 1 Jun 2018 18:12:01 +0900
-Subject: [PATCH] ODROID-XU4: Update hack avoiding the invalid temperature by
- TMU broken
-
-Change-Id: I6092834427950a50746535458e99bf7089212044
----
- drivers/thermal/thermal_helpers.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
-index c94bc824e5d3..2880126c5861 100644
---- a/drivers/thermal/thermal_helpers.c
-+++ b/drivers/thermal/thermal_helpers.c
-@@ -75,6 +75,10 @@ EXPORT_SYMBOL(get_thermal_instance);
-  *
-  * Return: On success returns 0, an error code otherwise
-  */
-+
-+#define	CRITICAL_TEMP	120000
-+int thermal_zone_data[4] = { 0, };
-+
- int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
- {
- 	int ret = -EINVAL;
-@@ -108,6 +112,30 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
- 			*temp = tz->emul_temperature;
- 	}
- 
-+	/* save thermal_zone data */
-+	if (!ret)
-+		thermal_zone_data[tz->id] = *temp;
-+	/*
-+	 * This case is that the thermal sensor is broken.
-+	 * That's not real temperature. Set the fake temperature value in order to
-+	 * avoid reaching the ciritical temperature.
-+	 */
-+	if ((thermal_zone_data[tz->id] > CRITICAL_TEMP) && (tz->id != 4)) {
-+		int i, broken_sensor = 0, correct_temp = 0;
-+		for (i = 0; i < 4; i++) {
-+			if ((thermal_zone_data[i] <= CRITICAL_TEMP) &&
-+			    (correct_temp <= thermal_zone_data[i]))
-+				correct_temp = thermal_zone_data[i];
-+			if (thermal_zone_data[i] > CRITICAL_TEMP)
-+				broken_sensor++;
-+		}
-+		/*
-+		 * if all thermal sensor broken then critical temperature data send
-+		 * for system poweroff.
-+		 */
-+		*temp = (broken_sensor == 4) ? CRITICAL_TEMP : correct_temp;
-+	}
-+
- 	mutex_unlock(&tz->lock);
- exit:
- 	return ret;
--- 
-2.31.1
-

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -1,84 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-
-# Note that import is performed twice for backwards compatability.
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x20; \
-    env import -c ${ramdisk_addr_r} 0x4000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x4000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x20;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-fatload mmc ${devnum}:1 ${fdt_addr_r} exynos5422-odroidxu4.dtb
-fdt addr ${fdt_addr_r}
-
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-xu4/uboot.config

@@ -1,3 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -1,53 +0,0 @@
-From c7825747afd8bb975dc918f28e4afe8058a518f3 Mon Sep 17 00:00:00 2001
-Message-Id: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Christian Hewitt <christianshewitt@gmail.com>
-Date: Mon, 11 Jan 2021 13:58:31 +0000
-Subject: [PATCH 01/10] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases
- to ODROID-N2 dtsi
-
-Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
-common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
-
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
----
- .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 39a09661c5f6..b78be3e6974d 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -13,6 +13,8 @@ / {
- 	aliases {
- 		serial0 = &uart_AO;
- 		ethernet0 = &ethmac;
-+		rtc0 = &rtc;
-+		rtc1 = &vrtc;
- 	};
- 
- 	dioo2133: audio-amplifier-0 {
-@@ -478,6 +480,18 @@ &ir {
- 	linux,rc-map-name = "rc-odroid";
- };
- 
-+&i2c3 {
-+	status = "okay";
-+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
-+	pinctrl-names = "default";
-+
-+	rtc: rtc@51 {
-+		compatible = "nxp,pcf8563";
-+		reg = <0x51>;
-+		wakeup-source;
-+	};
-+};
-+
- &pwm_ab {
- 	pinctrl-0 = <&pwm_a_e_pins>;
- 	pinctrl-names = "default";
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -1,37 +0,0 @@
-From ec3b1240b428c5652ccb7fdadad217a2ff8ab4db Mon Sep 17 00:00:00 2001
-Message-Id: <ec3b1240b428c5652ccb7fdadad217a2ff8ab4db.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Wed, 7 Apr 2021 04:26:08 +0000
-Subject: [PATCH 02/10] arm64: dts: meson: add saradc node to ODROID N2/N2+
-
-Add the meson saradc node to the ODROID N2/N2+ common dtsi.
-
-Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index b78be3e6974d..8a5e132c4b79 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -508,6 +508,11 @@ &pwm_AO_cd {
- 	status = "okay";
- };
- 
-+&saradc {
-+	status = "okay";
-+	vref-supply = <&vddao_1v8>;
-+};
-+
- /* SD card */
- &sd_emmc_b {
- 	status = "okay";
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -1,78 +0,0 @@
-From 5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f Mon Sep 17 00:00:00 2001
-Message-Id: <5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Wed, 7 Apr 2021 04:26:09 +0000
-Subject: [PATCH 03/10] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
-
-Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
-
-Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
----
- .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 8a5e132c4b79..41b2f9c96b5f 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -446,6 +446,51 @@ &frddr_c {
- };
- 
- &gpio {
-+	gpio-line-names =
-+		/* GPIOZ */
-+		"", "", "", "", "", "", "", "",
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOH */
-+		"", "", "", "", "", "", "", "",
-+		"",
-+		/* BOOT */
-+		"", "", "", "", "", "", "", "",
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOC */
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOA */
-+		"PIN_44", /* GPIOA_0 */
-+		"PIN_46", /* GPIOA_1 */
-+		"PIN_45", /* GPIOA_2 */
-+		"PIN_47", /* GPIOA_3 */
-+		"PIN_26", /* GPIOA_4 */
-+		"", "", "", "", "", "",
-+		"PIN_42", /* GPIOA_11 */
-+		"PIN_32", /* GPIOA_12 */
-+		"PIN_7",  /* GPIOA_13 */
-+		"PIN_27", /* GPIOA_14 */
-+		"PIN_28", /* GPIOA_15 */
-+		/* GPIOX */
-+		"PIN_16", /* GPIOX_0 */
-+		"PIN_18", /* GPIOX_1 */
-+		"PIN_22", /* GPIOX_2 */
-+		"PIN_11", /* GPIOX_3 */
-+		"PIN_13", /* GPIOX_4 */
-+		"PIN_33", /* GPIOX_5 */
-+		"PIN_35", /* GPIOX_6 */
-+		"PIN_15", /* GPIOX_7 */
-+		"PIN_19", /* GPIOX_8 */
-+		"PIN_21", /* GPIOX_9 */
-+		"PIN_24", /* GPIOX_10 */
-+		"PIN_23", /* GPIOX_11 */
-+		"PIN_8",  /* GPIOX_12 */
-+		"PIN_10", /* GPIOX_13 */
-+		"PIN_29", /* GPIOX_14 */
-+		"PIN_31", /* GPIOX_15 */
-+		"PIN_12", /* GPIOX_16 */
-+		"PIN_3",  /* GPIOX_17 */
-+		"PIN_5",  /* GPIOX_18 */
-+		"PIN_36"; /* GPIOX_19 */
- 	/*
- 	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
- 	 * to be turned high in order to be detected by the USB Controller
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,42 +0,0 @@
-From 70e65f906389f7236fe9ad8e1c05dedac0d1988b Mon Sep 17 00:00:00 2001
-Message-Id: <70e65f906389f7236fe9ad8e1c05dedac0d1988b.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH 04/10] arm64: dts: meson: g12b: add power button support
-
-Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
-GPIO is low active, e.g. when connecting with pin 9 (GND) a power
-button press is triggered.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 41b2f9c96b5f..4b6bb7e74e25 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
- 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- 	};
- 
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		power-button {
-+			label = "power";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,42 +0,0 @@
-From 86d9151effff69d2a8fc2027a31dd60bd8c6eb05 Mon Sep 17 00:00:00 2001
-Message-Id: <86d9151effff69d2a8fc2027a31dd60bd8c6eb05.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH 05/10] arm64: dts: meson: g12b: add GPIO fan support
-
-Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
-pad used to control the fan does not support real PWM, hence the RPM
-cannot be modulated.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 4b6bb7e74e25..e8a3ede698b5 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
- 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- 	};
- 
-+	/*
-+	 * 5V 80x80x10.8mm cooling fan from Hardkernel shop.
-+	 */
-+	fan0: gpio-fan {
-+		#cooling-cells = <2>;
-+		compatible = "gpio-fan";
-+		gpio-fan,speed-map = <0 0 1600 1>;
-+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
-+		status = "okay";
-+	};
-+
- 	gpio-keys-polled {
- 		compatible = "gpio-keys-polled";
- 		poll-interval = <100>;
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,74 +0,0 @@
-From f1120f132dbdf2e7f7acf328de55bbdce877d882 Mon Sep 17 00:00:00 2001
-Message-Id: <f1120f132dbdf2e7f7acf328de55bbdce877d882.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH 06/10] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
- device
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add the GPIO fan as a cooling device for the CPU thermal zone. Since we
-have only full fan speed available with this, set the tripping point to
-65°C which is the highest tripping point which Hardkernel used in their
-downstream kernel.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index e8a3ede698b5..dd345c6aa4b5 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -388,6 +388,44 @@ &clkc_audio {
- 	status = "okay";
- };
- 
-+&cpu_thermal {
-+	trips {
-+		cpu_warm: cpu_warm {
-+			hysteresis = <5000>;
-+			temperature = <65000>;
-+			type = "active";
-+		};
-+	};
-+
-+	cooling-maps {
-+		map0 {
-+			cooling-device =
-+				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+			trip = <&cpu_warm>;
-+		};
-+		map1 {
-+			trip = <&cpu_passive>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+		map2 {
-+			trip = <&cpu_hot>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+	};
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vddcpu_b>;
- 	operating-points-v2 = <&cpu_opp_table_0>;
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-add-uart_A-node.patch

@@ -1,44 +0,0 @@
-From dcaf2dc71dd62487eb37561682934414a5795e0e Mon Sep 17 00:00:00 2001
-Message-Id: <dcaf2dc71dd62487eb37561682934414a5795e0e.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH 07/10] arm64: dts: meson: add uart_A node
-
-The UART_A is available through J3 pin 8/10 and documented to be
-available as UART by default.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index dd345c6aa4b5..cec346178e3d 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -12,6 +12,7 @@
- / {
- 	aliases {
- 		serial0 = &uart_AO;
-+		serial1 = &uart_A;
- 		ethernet0 = &ethmac;
- 		rtc0 = &rtc;
- 		rtc1 = &vrtc;
-@@ -728,6 +729,12 @@ &toddr_c {
- 	status = "okay";
- };
- 
-+&uart_A {
-+	status = "okay";
-+	pinctrl-0 = <&uart_a_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &uart_AO {
- 	status = "okay";
- 	pinctrl-0 = <&uart_ao_a_pins>;
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,37 +0,0 @@
-From d5d2d8b9eb93eab85af12f1844975903a7c5a879 Mon Sep 17 00:00:00 2001
-Message-Id: <d5d2d8b9eb93eab85af12f1844975903a7c5a879.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH 08/10] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
-
-The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
-are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
-I2C instance. Enable i2c2 and use the appropriate pinmux.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index cec346178e3d..f1c3356c78a0 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -586,6 +586,12 @@ &ir {
- 	linux,rc-map-name = "rc-odroid";
- };
- 
-+&i2c2 {
-+	status = "okay";
-+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &i2c3 {
- 	status = "okay";
- 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0009-Revert-of-fdt-Make-sure-no-map-does-not-remove-alrea.patch

@@ -1,52 +0,0 @@
-From 19c34c0ceb6302b07e1017c426796c4cf7322d13 Mon Sep 17 00:00:00 2001
-Message-Id: <19c34c0ceb6302b07e1017c426796c4cf7322d13.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 26 Jul 2021 16:59:08 +0200
-Subject: [PATCH 09/10] Revert "of/fdt: Make sure no-map does not remove
- already reserved regions"
-
-U-Boot on Hardkernel ODROID-N2 adds fdt "memreserve" entries alongside
-the reserved-memory nodes present in upstream Linux. This causes
-reserving memory with the no-map flag to fail:
-[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
-
-This seems to cause kernel crashes such as:
-[129988.642342] SError Interrupt on CPU4, code 0xbf000000 -- SError
-
-Restore the bahavior of Linux kernel 5.9 and older and don't fail
-updating the mapping with no-map.
-
-This reverts commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- drivers/of/fdt.c | 10 +---------
- 1 file changed, 1 insertion(+), 9 deletions(-)
-
-diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
-index 57ff31b6b1e4..7ef2246e0b1e 100644
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1149,16 +1149,8 @@ int __init __weak early_init_dt_mark_hotplug_memory_arch(u64 base, u64 size)
- int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
- 					phys_addr_t size, bool nomap)
- {
--	if (nomap) {
--		/*
--		 * If the memory is already reserved (by another region), we
--		 * should not allow it to be marked nomap.
--		 */
--		if (memblock_is_region_reserved(base, size))
--			return -EBUSY;
--
-+	if (nomap)
- 		return memblock_mark_nomap(base, size);
--	}
- 	return memblock_reserve(base, size);
- }
- 
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/0010-Revert-drm-meson_drv-add-shutdown-function.patch

@@ -1,48 +0,0 @@
-From be21685475a0739d44ca4c63fcb7f50b324593c9 Mon Sep 17 00:00:00 2001
-Message-Id: <be21685475a0739d44ca4c63fcb7f50b324593c9.1642331593.git.stefan@agner.ch>
-In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1642331593.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Sun, 16 Jan 2022 12:12:29 +0100
-Subject: [PATCH 10/10] Revert "drm: meson_drv add shutdown function"
-
-This reverts commit d4ec1ffbdaa8939a208656e9c1440742c457ef16.
-
-It seems that this patch actually breaks reboot on ODROID-N2+.
----
- drivers/gpu/drm/meson/meson_drv.c | 12 ------------
- 1 file changed, 12 deletions(-)
-
-diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
-index 2753067c08e6..3d1de9cbb1c8 100644
---- a/drivers/gpu/drm/meson/meson_drv.c
-+++ b/drivers/gpu/drm/meson/meson_drv.c
-@@ -482,17 +482,6 @@ static int meson_probe_remote(struct platform_device *pdev,
- 	return count;
- }
- 
--static void meson_drv_shutdown(struct platform_device *pdev)
--{
--	struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
--
--	if (!priv)
--		return;
--
--	drm_kms_helper_poll_fini(priv->drm);
--	drm_atomic_helper_shutdown(priv->drm);
--}
--
- static int meson_drv_probe(struct platform_device *pdev)
- {
- 	struct component_match *match = NULL;
-@@ -564,7 +553,6 @@ static const struct dev_pm_ops meson_drv_pm_ops = {
- 
- static struct platform_driver meson_drm_platform_driver = {
- 	.probe      = meson_drv_probe,
--	.shutdown   = meson_drv_shutdown,
- 	.driver     = {
- 		.name	= "meson-drm",
- 		.of_match_table = dt_match,
--- 
-2.34.1
-

buildroot-external/board/hardkernel/patches/linux/board-odroidc2-add-uartA-uartC.patch

@@ -1,32 +0,0 @@
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-index 1cc9dc6..9f48dff 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-@@ -16,6 +16,8 @@
- 
- 	aliases {
- 		serial0 = &uart_AO;
-+		serial1 = &uart_A;
-+		serial2 = &uart_C;
- 		ethernet0 = &ethmac;
- 	};
- 
-@@ -290,6 +355,18 @@
- 	pinctrl-names = "default";
- };
- 
-+&uart_A {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_a_pins>;
-+	pinctrl-names = "default";
-+};
-+
-+&uart_C {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_c_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &usb0_phy {
- 	status = "okay";
- 	phy-supply = <&usb_otg_pwr>;

buildroot-external/board/hardkernel/patches/linux/general-meson64-i2cX-missing-pins.patch

@@ -1,22 +0,0 @@
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-index 98cbba6..48ca119 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-@@ -321,6 +322,8 @@
- 
- &i2c_A {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_a_pins>;
- };
- 
- &i2c_AO {
-@@ -329,6 +332,8 @@
- 
- &i2c_B {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_b_pins>;
- };
- 
- &i2c_C {

buildroot-external/board/hardkernel/patches/linux/hardkernel-0013-C4-arm64-dts-add-uart_A-node.patch

@@ -1,41 +0,0 @@
-From ca89096189299862a7b2b3123d96fc8bfbe74ce3 Mon Sep 17 00:00:00 2001
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Tue, 14 Apr 2020 14:15:25 +0900
-Subject: [PATCH 13/74] ODROID-C4: arm64/dts: add uart_A node
-
-Change-Id: Ib66a03da2fcf39fc459c20c9f98b1baca34dcf5b
----
- arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-index 1b749bd340ce..e5d73598c131 100644
---- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-@@ -14,8 +14,9 @@ / {
- 	model = "Hardkernel ODROID-C4";
- 
- 	aliases {
--		serial0 = &uart_AO;
- 		ethernet0 = &ethmac;
-+		serial0 = &uart_AO;
-+		serial1 = &uart_A;
- 	};
- 
- 	chosen {
-@@ -385,6 +386,12 @@ &sd_emmc_c {
- 	vqmmc-supply = <&flash_1v8>;
- };
- 
-+&uart_A {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart_a_pins>;
-+};
-+
- &uart_AO {
- 	status = "okay";
- 	pinctrl-0 = <&uart_ao_a_pins>;
--- 
-2.25.1
-

buildroot-external/board/hardkernel/patches/linux/hardkernel-0021-C4-arm64-dts-add-i2c2-i2c3-node.patch

@@ -1,85 +0,0 @@
-From 400645dd70ae5a0efbbce35067c8674d380ed2a7 Mon Sep 17 00:00:00 2001
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Wed, 13 May 2020 10:37:28 +0900
-Subject: [PATCH 21/74] ODROID-C4: arm64/dts: add i2c2, i2c3 node
-
-Change-Id: Id75f935111744ff6945791deefef20f897dc98ac
-(cherry picked from commit 3f4b2ffd0905946175c478baa65361695e78e0de)
----
- .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 53 +++++++++++++++++++
- 1 file changed, 53 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-index 831053aa6dff..5988dc5f34d0 100644
---- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
-@@ -16,6 +16,8 @@ / {
- 
- 	aliases {
- 		ethernet0 = &ethmac;
-+		i2c0 = &i2c2;
-+		i2c1 = &i2c3;
- 		serial0 = &uart_AO;
- 		serial1 = &uart_A;
- 		spi0 = &spicc0;
-@@ -434,6 +436,57 @@ &ir {
- 	linux,rc-map-name = "rc-odroid";
- };
- 
-+&i2c2 {
-+	status = "okay";
-+
-+	/*
-+	 * 40 Pin Header : SDA(GPIOX.17->3 Pin)
-+	 *		   SCL(GPIOX.18->5 Pin)
-+	 */
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_master_pins1>;
-+
-+	/* default 400k */
-+	clock-frequency = <400000>;
-+};
-+
-+&i2c3 {
-+	/* default i2c clock-frequency is 100Khz */
-+	status = "okay";
-+
-+	/*
-+	 * 40 Pin Header : SDA(GPIOA.14->27 Pin)
-+	 *		   SCL(GPIOA.15->28 Pin)
-+	 */
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c3_master_pins2>;
-+
-+	/* default 100k */
-+	clock-frequency = <100000>;
-+};
-+
-+&periphs_pinctrl {
-+	i2c2_master_pins1: i2c2-master-pins1 {
-+		mux {
-+			groups = "i2c2_sda_x",
-+				"i2c2_sck_x";
-+			function = "i2c2";
-+			bias-pull-up;
-+			drive-strength-microamp = <3000>;
-+		};
-+	};
-+
-+	i2c3_master_pins2: i2c3-master-pins2 {
-+		mux {
-+			groups = "i2c3_sda_a",
-+				"i2c3_sck_a";
-+			function = "i2c3";
-+			bias-pull-up;
-+			drive-strength-microamp = <3000>;
-+		};
-+	};
-+};
-+
- &pwm_AO_cd {
- 	pinctrl-0 = <&pwm_ao_d_e_pins>;
- 	pinctrl-names = "default";
--- 
-2.25.1
-

buildroot-external/board/hardkernel/patches/uboot/0001-HACK-mmc-meson-gx-limit-to-24MHz.patch

@@ -1,27 +0,0 @@
-From ff82d04354784cd982ab1a912c08d3eb22f82d13 Mon Sep 17 00:00:00 2001
-Message-Id: <ff82d04354784cd982ab1a912c08d3eb22f82d13.1632758701.git.stefan@agner.ch>
-From: Neil Armstrong <narmstrong@baylibre.com>
-Date: Mon, 2 Sep 2019 15:42:04 +0200
-Subject: [PATCH] HACK: mmc: meson-gx: limit to 24MHz
-
-Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
----
- drivers/mmc/meson_gx_mmc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
-index fcf4f03d1e..6ded4b619b 100644
---- a/drivers/mmc/meson_gx_mmc.c
-+++ b/drivers/mmc/meson_gx_mmc.c
-@@ -279,7 +279,7 @@ static int meson_mmc_probe(struct udevice *dev)
- 	cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
- 			MMC_MODE_HS_52MHz | MMC_MODE_HS;
- 	cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
--	cfg->f_max = 100000000; /* 100 MHz */
-+	cfg->f_max = SD_EMMC_CLKSRC_24M;
- 	cfg->b_max = 511; /* max 512 - 1 blocks */
- 	cfg->name = dev->name;
- 
--- 
-2.33.0
-