Add missing version to test action

* Improve handling of timeouts in tests

Make timeout handling in tests more transparent. Added a custom shell
driver that allows to define global timeout for commands in the config
file, and replaced for/sleep constructs with infinite loops that will be
eventually terminated by pytest-timeout plugin. Current timeouts taken
from last runs on Github CI with some extra headroom.

* test_supervisor_is_updated shouldn't be skipped if no update was needed

* Allow more time for system startup

* Allow even more time for system startup

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -29,6 +29,7 @@ body:
         - khadas-vim3 (Khadas VIM3)
         - odroid-c2 (Hardkernel ODROID-C2)
         - odroid-c4 (Hardkernel ODROID-C4)
+        - odroid-m1 (Hardkernel ODROID-M1)
         - odroid-n2 (Hardkernel ODROID-N2/N2+)
         - odroid-xu4 (Hardkernel ODROID-XU4)
         - ova (for Virtual Machines)
@@ -39,10 +40,11 @@ body:
         - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
         - tinker (ASUS Tinker Board/Tinker Board S)
         - yellow (Home Assistant Yellow)
+        - green (Home Assistant Green)
       description: >
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Board` value.
+        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
 
-        [![Open your Home Assistant instance and show your Home Assistant version information.](https://my.home-assistant.io/badges/info.svg)](https://my.home-assistant.io/redirect/info/)
+        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
   - type: input
     validations:
       required: true
@@ -50,7 +52,7 @@ body:
       label: What version of Home Assistant Operating System is installed?
       placeholder: "6.6"
       description: >
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/). It is listed as the `Host Operating System` value.
+        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
   - type: dropdown
     validations:
       required: true
@@ -78,7 +80,8 @@ body:
     attributes:
       label: Anything in the Supervisor logs that might be useful for us?
       description: >
-        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Supervisor`.
+        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
+        then choose `Supervisor` in the top right.
 
         [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
       render: txt
@@ -88,16 +91,19 @@ body:
     attributes:
       label: Anything in the Host logs that might be useful for us?
       description: >
-        Supervisor Logs can be found under [Configuration panel -> Add-ons, Backup & Supervisor -> System](https://my.home-assistant.io/redirect/supervisor_logs/), then choose Log Provider `Host`.
+        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
+        then choose `Host` in the top right.
       render: txt
   - type: textarea
     attributes:
-      label: System Health information
+      label: System information
       description: >
         **Optional** Copy the full System Health in this text area.
 
-        Can be found in the [Configuration panel -> Settings -> Info](https://my.home-assistant.io/redirect/info/).
-        Use the copy icon on top right and choose `For GitHub`.
+        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
+        Click the copy button at the bottom of the pop-up and paste it here.
+        
+        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
   - type: textarea
     attributes:
       label: Additional information

.github/actions/bump-rpi-imager-version/action.yml

@@ -0,0 +1,95 @@
+name: 'Bump RPi Imager OS version'
+description: 'Bump version of Home Assistant OS in RPi Imager'
+inputs:
+  version:
+    required: true
+    description: "Version of Home Assistant OS to bump to."
+  release-date:
+    required: true
+    description: "Release date as ISO 8601 date string."
+runs:
+  using: "composite"
+  steps:
+    - shell: bash
+      id: validate-input
+      env:
+        INPUTS_DATE: ${{ inputs.release-date }}
+      run: |
+        if [[ -z "$INPUTS_DATE" ]] || [[ ! "$INPUTS_DATE" =~ ^([0-9]{4})-([0-9]{2})-([0-9]{2})T([0-9]{2}):([0-9]{2}):([0-9]{2})Z$ ]]; then
+          echo "::error::Argument 'release-date' must be an ISO 8601 date string."
+          exit 1
+        else
+          echo "date=$(date --date=${INPUTS_DATE} +'%Y-%m-%d')" >> "$GITHUB_OUTPUT"
+        fi
+
+    - shell: bash
+      run: git clone --depth 1 https://github.com/home-assistant/version.git /tmp/version
+
+    - shell: bash
+      env:
+        INPUTS_VERSION: ${{ inputs.version }}
+      run: |
+        function bump_entry() {
+          json=$1
+          version=$2
+          release_date=$3
+          image_id=$4
+          image_name=$5
+          url="https://github.com/home-assistant/operating-system/releases/download/${version}/haos_${image_id}-${version}.img.xz"
+          temp_image=$(mktemp --suffix=.img.xz)
+          temp_out=$(mktemp)
+
+          curl -fsL -o "$temp_image" "$url"
+          image_download_size=$(stat --printf="%s" "$temp_image")
+          image_download_sha256=$(sha256sum "$temp_image" | awk '{print $1}')
+          unxz "$temp_image"
+          temp_unpacked="${temp_image%.*}"
+          extract_size=$(stat --printf="%s" "$temp_unpacked")
+          extract_sha256=$(sha256sum "$temp_unpacked" | awk '{print $1}')
+
+          entry_name="Home Assistant OS ${version} (${image_name})"
+
+            jq '
+              . as $data
+              | $data
+              | .os_list = [
+                  .os_list[]
+                  | if .name | test("Home Assistant OS .* \\(" + $image_name + "\\)") then
+                    .name = "Home Assistant OS " + $version + " (" + $image_name + ")"
+                    | .url = $url
+                    | .extract_size = ($extract_size | tonumber)
+                    | .extract_sha256 = $extract_sha256
+                    | .release_date = $release_date
+                    | .image_download_size = ($image_download_size | tonumber)
+                    | .image_download_sha256 = $image_download_sha256
+                  else .
+                  end
+                ]' \
+              --arg version "$version" \
+              --arg image_name "$image_name" \
+              --arg entry_name "$entry_name" \
+              --arg release_date "$release_date" \
+              --arg url "$url" \
+              --arg image_download_size "$image_download_size" \
+              --arg image_download_sha256 "$image_download_sha256" \
+              --arg extract_size "$extract_size" \
+              --arg extract_sha256 "$extract_sha256" \
+              "$json" > "$temp_out"
+
+          mv "$temp_out" "$json"
+          rm -rf "$temp_unpacked" "$temp_out"
+        }
+
+        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi3-64" "RPi 3"
+        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi4-64" "RPi 4/400"
+
+    - shell: bash
+      env:
+        INPUTS_VERSION: ${{ inputs.version }}
+      run: |
+        cd /tmp/version
+        git commit -am "Bump Home Assistant OS to ${INPUTS_VERSION} for RPi Imager"
+        git push
+
+    - shell: bash
+      run: rm -rf /tmp/version

.github/label-actions.yml

@@ -8,6 +8,7 @@ assume-fixed:
     release. You can find the latest stable release at
     https://github.com/home-assistant/operating-system/releases/latest
   close: true
+  close-reason: not planned
 
 core-issue:
   comment: >
@@ -19,6 +20,19 @@ core-issue:
     repository, the issue might have been reported already. Open a new issue
     in that repository if you can't find a matching issue.
   close: true
+  close-reason: not planned
+
+frontend-issue:
+  comment: >
+    :wave: @{issue-author}, thanks for reporting an issue!
+
+
+    It looks like this issue is related to Home Assistant Frontend. Please
+    check the [Home Assistant Frontend](https://github.com/home-assistant/frontend/issues)
+    repository, the issue might have been reported already. Open a new issue
+    in that repository if you can't find a matching issue.
+  close: true
+  close-reason: not planned
 
 supervisor-issue:
   comment: >
@@ -30,3 +44,16 @@ supervisor-issue:
     repository, the issue might have been reported already. Open a new issue
     in that repository if you can't find a matching issue.
   close: true
+  close-reason: not planned
+
+new-feature:
+  comment: >
+    :wave: @{issue-author}, thanks for your input!
+
+    We use this issue tracker to track issues of currently supported features.
+    Your request appears to request a new feature. We track potential new
+    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
+    Please check if someone already requested a similar feature, or create
+    a new feature request with the "haos" tag in that forum. Thank you!
+  close: true
+  close-reason: not planned

.github/release-drafter.yml

@@ -1,4 +1,5 @@
-name-template: Home Assistant OS $NEXT_MINOR_VERSION
+name-template: Home Assistant OS $RESOLVED_VERSION
+tag-template: $RESOLVED_VERSION
 version-template: "$MAJOR.$MINOR"
 categories:
   - title: 'Home Assistant Operating System'
@@ -9,6 +10,8 @@ categories:
     label: 'board/raspberrypi'
   - title: 'Home Assistant Yellow'
     label: 'board/yellow'
+  - title: 'Home Assistant Green'
+    label: 'board/green'
   - title: 'Open Virtual Appliance'
     label: 'board/ova'
   - title: 'Generic x86-64'
@@ -26,3 +29,8 @@ template: |
   ## Changes
 
   $CHANGES
+version-resolver:
+  major:
+    labels:
+      - 'major'
+  default: minor

.github/workflows/artifacts-index.yaml

@@ -0,0 +1,93 @@
+name: Update artifacts index
+
+on:
+  # Manual run for specified version
+  workflow_dispatch:
+    inputs:
+      version:
+        description: Version of HAOS to build index for
+        required: true
+        type: string
+
+  # Called by other workflows (e.g. build.yaml)
+  workflow_call:
+    inputs:
+      version:
+        description: Version of HAOS to build index for
+        required: true
+        type: string
+    secrets:
+      R2_OS_ARTIFACTS_ID:
+        required: true
+      R2_OS_ARTIFACTS_KEY:
+        required: true
+      R2_OS_ARTIFACTS_BUCKET:
+        required: true
+      R2_OS_ARTIFACTS_ENDPOINT:
+        required: true
+      CF_ZONE:
+        required: true
+      CF_PURGE_TOKEN:
+        required: true
+
+env:
+  PYTHON_VERSION: "3.10"
+
+jobs:
+  build-index:
+    name: Build Home Assistant OS artifacts index
+    runs-on: ubuntu-22.04
+    steps:
+      - name: Checkout source
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Setup Python version ${{ env.PYTHON_VERSION }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: ${{ env.PYTHON_VERSION }}
+
+      - name: Install AWS CLI
+        run: pip install awscli
+
+      - name: Create build index
+        env:
+          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
+        run: |
+          aws s3api list-objects-v2 \
+            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
+            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
+            --prefix "${{ github.event.inputs.version }}/" \
+            --query 'Contents[].Key' | jq 'map(split("/")[1]) | sort' > "${{ github.event.inputs.version }}.json"
+          aws s3 cp \
+            "${{ github.event.inputs.version }}.json" \
+            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/indexes/ \
+            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}"
+
+      - name: Regenerate artifacts index
+        env:
+          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
+        run: |
+          aws s3api list-objects-v2 \
+            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
+            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
+            --prefix "indexes/" \
+            --query 'Contents[].Key' | jq 'map(capture("indexes/(?<version>[[:digit:]].+).json").version) | sort' > .os-artifacts/index.json
+          aws s3 sync \
+            .os-artifacts/ \
+            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/ \
+            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
+
+      - name: Flush CloudFlare cache
+        run: |
+          curl --silent --show-error --fail -X POST \
+            "https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache" \
+            -H "Authorization: Bearer ${{ secrets.CF_PURGE_TOKEN }}" \
+            -H "Content-Type: application/json" \
+            --data '{"files": [
+              "https://os-artifacts.home-assistant.io/index.html",
+              "https://os-artifacts.home-assistant.io/index.json"
+            ] }'

.github/workflows/build.yaml

@@ -0,0 +1,303 @@
+# Home Assistant Operating System build workflow
+
+name: OS build
+
+on:
+  release:
+    types: [published]
+  workflow_dispatch:
+    inputs:
+      boards:
+        description: 'List of boards to build (comma separated identifiers)'
+        required: false
+        type: string
+
+env:
+  PYTHON_VERSION: "3.10"
+
+jobs:
+  prepare:
+    name: Prepare build
+    runs-on: ubuntu-22.04
+    permissions:
+      contents: read
+      pull-requests: read
+      packages: write
+    outputs:
+      version_dev: ${{ steps.version_dev.outputs.version_dev }}
+      version_main: ${{ steps.version.outputs.version_main }}
+      version_full: ${{ steps.version.outputs.version_full }}
+      channel: ${{ steps.channel.outputs.channel }}
+      matrix: ${{ steps.generate_matrix.outputs.result }}
+      build_container_image: ghcr.io/${{ github.repository_owner }}/haos-builder@${{ steps.build_haos_builder.outputs.digest }}
+    steps:
+      - name: Checkout source
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Generate development version
+        shell: bash
+        id: version_dev
+        if: ${{ github.event_name != 'release' }}
+        run: |
+          version_dev="dev$(date --utc +'%Y%m%d')"
+          echo "Development version \"${version_dev}\""
+          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
+
+      - name: Set version suffix
+        if: ${{ github.event_name != 'release' }}
+        env:
+          VERSION_DEV: ${{ steps.version_dev.outputs.version_dev }}
+        run: |
+          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
+
+      - name: Get version
+        id: version
+        run: |
+          . ${GITHUB_WORKSPACE}/buildroot-external/meta
+          echo "version_main=${VERSION_MAJOR}.${VERSION_MINOR}" >> $GITHUB_OUTPUT
+          if [ -z "${VERSION_SUFFIX}" ]; then
+            version_full="${VERSION_MAJOR}.${VERSION_MINOR}"
+          else
+            version_full="${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_SUFFIX}"
+          fi
+          echo "version_full=${version_full}" >> $GITHUB_OUTPUT
+          echo "Full version number of this release is \"${version_full}\"."
+
+      - name: Validate version
+        id: version_check
+        if: ${{ github.event_name == 'release' }}
+        run: |
+          if [ "${{ steps.version.outputs.version_full }}" != "${{ github.event.release.tag_name }}" ]; then
+            echo "Version number in Buildroot metadata does not match tag (${{ steps.version.outputs.version_full }} vs ${{ github.event.release.tag_name }})."
+            exit 1
+          fi
+
+      - name: Get channel
+        id: channel
+        run: |
+          if [[ "${{ github.event_name }}" == "release" ]]; then
+            if [[ "${{ github.event.release.prerelease }}" == "true" ]]; then
+              echo "channel=beta" >> "$GITHUB_OUTPUT"
+            else
+              echo "channel=stable" >> "$GITHUB_OUTPUT"
+            fi
+          else
+            echo "channel=dev" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Create build matrix
+        uses: actions/github-script@v6
+        id: generate_matrix
+        with:
+          script: |
+            const boards = require('./.github/workflows/matrix.json')
+            if ("${{ github.event_name }}" == "release") {
+              return { "board": boards }
+            }
+
+            const boardFilter = "${{ github.event.inputs.boards }}"
+            if (boardFilter == "") {
+              console.log("Run full build for all boards")
+              return { "board": boards }
+            } else {
+              console.log("Run partial build")
+              const boardSet = new Set(boardFilter.split(","))
+              const buildBoards = boards.filter(b => boardSet.has(b.id))
+              return { "board": buildBoards }
+            }
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3.0.0
+      - name: Log in to the GitHub container registry
+        uses: docker/login-action@v3.0.0
+        with:
+            registry: ghcr.io
+            username: ${{ github.repository_owner }}
+            password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and Push
+        uses: docker/build-push-action@v5.0.0
+        id: build_haos_builder
+        with:
+          context: .
+          file: Dockerfile
+          tags: ghcr.io/${{ github.repository_owner }}/haos-builder
+          cache-from: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version_main.outputs.version_main }}
+          cache-to: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version_main.outputs.version_main }}
+          push: true
+
+  build:
+    name: Build for ${{ matrix.board.id }}
+    permissions:
+      contents: write  # for actions/upload-release-asset to upload release asset
+    needs: prepare
+    strategy:
+      fail-fast: ${{ github.event_name == 'release' }}
+      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
+    runs-on: ubuntu-22.04
+
+    steps:
+      - name: Checkout source
+        uses: actions/checkout@v4
+        with:
+          submodules: true
+          persist-credentials: false
+
+      - name: Setup Python version ${{ env.PYTHON_VERSION }}
+        if: ${{ github.event_name != 'release' }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: ${{ env.PYTHON_VERSION }}
+
+      - name: Install AWS CLI
+        if: ${{ github.event_name != 'release' }}
+        run: pip install awscli
+
+      - name: Set version suffix
+        if: ${{ github.event_name != 'release' }}
+        env:
+          VERSION_DEV: ${{ needs.prepare.outputs.version_dev }}
+        run: |
+          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
+
+      - name: 'Add release PKI certs'
+        env:
+          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
+          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
+        run: |
+          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
+          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
+
+      - name: Free space on build drive
+        run: |
+          # Inspired by https://github.com/easimon/maximize-build-space/blob/v7/action.yml
+          sudo rm -rf /usr/local/lib/android/sdk/ndk
+          sudo rm -rf /opt/hostedtoolcache/CodeQL
+          # Make sure cache action can restore this lcoation
+          sudo mkdir /mnt/cache
+          sudo chown -R runner:runner /mnt/cache
+
+      - name: "Restore cache: object files"
+        uses: actions/cache/restore@v3
+        with:
+          path: /mnt/cache/cc
+          key: haos-cc-${{ matrix.board.id }}
+
+      - name: Build
+        run: |
+          BUILDER_UID="$(id -u)"
+          BUILDER_GID="$(id -g)"
+          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
+            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
+            -v "/mnt/cache:/cache" \
+            ${{ needs.prepare.outputs.build_container_image }} \
+            make BUILDDIR=/build ${{ matrix.board.defconfig }}
+
+      - name: Upload artifacts
+        if: ${{ github.event_name != 'release' }}
+        working-directory: output/images/
+        env:
+          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
+        run: |
+          aws s3 sync \
+            ./ \
+            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/${{ needs.prepare.outputs.version_full }}/ \
+            --exclude "*" \
+            --include "haos_*" \
+            --endpoint-url ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
+
+      - name: Upload release assets
+        if: ${{ github.event_name == 'release' }}
+        uses: shogo82148/actions-upload-release-asset@v1
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: output/images/haos_*
+
+      - name: Print cache stats
+        run: |
+          echo "Cache size: $(du -sh /mnt/cache/cc)"
+          echo "Files total: $(find /mnt/cache/cc -mindepth 1 -type f | wc -l)"
+          echo "Old files: $(find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile | wc -l)"
+
+      - name: "Save cache: object files"
+        if: github.ref == 'refs/heads/dev'
+        uses: actions/cache/save@v3
+        with:
+          path: /mnt/cache/cc
+          key: haos-cc-${{ matrix.board.id }}-${{ github.run_id }}
+
+      - name: Upload ova image to artifacts for test job
+        uses: actions/upload-artifact@v3
+        if: ${{ matrix.board.id == 'ova' }}
+        with:
+          name: ova-image
+          path: |
+            output/images/haos_ova*.qcow2.xz
+
+  test:
+    name: Test OS image
+    needs: [ build, prepare ]
+    uses: ./.github/workflows/test.yaml
+    with:
+      version: ${{ needs.prepare.outputs.version_full }}
+
+  update_index:
+    name: Update artifacts index
+    if: ${{ github.event_name != 'release' }}
+    needs: [ build, prepare ]
+    uses: home-assistant/operating-system/.github/workflows/artifacts-index.yaml@dev
+    with:
+      version: ${{ needs.prepare.outputs.version_full }}
+    secrets:
+      R2_OS_ARTIFACTS_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
+      R2_OS_ARTIFACTS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
+      R2_OS_ARTIFACTS_BUCKET: ${{ secrets.R2_OS_ARTIFACTS_BUCKET }}
+      R2_OS_ARTIFACTS_ENDPOINT: ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
+      CF_ZONE: ${{ secrets.CF_ZONE }}
+      CF_PURGE_TOKEN: ${{ secrets.CF_PURGE_TOKEN }}
+
+  bump_version:
+    name: Bump ${{ needs.prepare.outputs.channel }} channel version
+    if: ${{ github.repository == 'home-assistant/operating-system' }}
+    environment: ${{ needs.prepare.outputs.channel }}
+    needs: [ build, prepare ]
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Checkout source
+      uses: actions/checkout@v4
+      with:
+        persist-credentials: false
+
+    - name: Initialize git
+      uses: home-assistant/actions/helpers/git-init@master
+      with:
+        name: ${{ secrets.GIT_NAME }}
+        email: ${{ secrets.GIT_EMAIL }}
+        token: ${{ secrets.GIT_TOKEN }}
+
+    - name: Bump Home Assistant OS ${{ needs.prepare.outputs.channel }} channel version
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.prepare.outputs.version_full }}
+        channel: ${{ needs.prepare.outputs.channel }}
+
+    - name: Bump Home Assistant OS beta channel version on stable release
+      if: ${{ needs.prepare.outputs.channel == 'stable' }}
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.prepare.outputs.version_full }}
+        channel: beta
+
+    - name: Bump stable Home Assistant version for RPi Imager
+      if: ${{ github.event_name == 'release' && needs.prepare.outputs.channel == 'stable' }}
+      uses: "./.github/actions/bump-rpi-imager-version"
+      with:
+        version: ${{ needs.prepare.outputs.version_full }}
+        release-date: ${{ github.event.release.published_at }}

.github/workflows/dev.yml

@@ -1,143 +0,0 @@
-# Home Assistant Operating System build workflow
-
-name: Development build
-
-on:
-  workflow_dispatch:
-  pull_request_target:
-    types: [opened,synchronize,labeled]
-
-jobs:
-  prepare:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Prepare build
-    runs-on: [ "ubuntu-20.04" ]
-    permissions:
-      contents: read
-      pull-requests: read
-    outputs:
-      version_main: ${{ steps.version_main.outputs.version_main }}
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}${{ steps.version_pr.outputs.version_pr }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-    steps:
-      - name: Generate Development build version
-        shell: bash
-        id: version_dev
-        run: |
-          version_dev="dev$(date --utc +'%Y%m%d')"
-          echo "Development version \"${version_dev}\""
-          echo "::set-output name=version_dev::${version_dev}"
-      - name: Generate Development build version for PR
-        if: ${{ github.event.pull_request }}
-        shell: bash
-        id: version_pr
-        run: |
-          version_pr=$(printf "%05d" ${{ github.event.pull_request.number }})
-          echo "Development build for PR #${{ github.event.pull_request.number }}"
-          echo "::set-output name=version_pr::${version_pr}"
-      - uses: actions/checkout@v3
-      - name: Get Major/Minor version
-        id: version_main
-        run: |
-          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
-          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          echo "::set-output name=version_main::${major}.${build}"
-      - name: Create build matrix
-        uses: actions/github-script@v6
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-
-            if (context.eventName == "workflow_dispatch") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            }
-
-            const labels = context.payload.pull_request.labels.map(l => l.name)
-            const labelsSet = new Set(labels)
-            const buildBoards = boards.filter(b => labelsSet.has(b.label))
-
-            return { "board": buildBoards }
-
-  build:
-    if: ${{ github.event_name == 'workflow_dispatch' || contains(github.event.pull_request.labels.*.name, 'run-dev-build') }}
-    name: Development build for ${{ matrix.board.id }}
-    environment: "dev_build"
-    needs: prepare
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
-    runs-on: ${{ matrix.board.runner }}
-
-    steps:
-      - name: Define git reference
-        uses: actions/github-script@v6
-        id: generate_gitref
-        with:
-          script: |
-            if (context.eventName == "workflow_dispatch")
-              return { "ref": context.ref }
-            return { "ref": context.payload.pull_request.head.sha }
-
-      - name: Checkout source
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          persist-credentials: false
-          ref: ${{ fromJSON(steps.generate_gitref.outputs.result).ref }}
-
-      - name: Build container
-        run: docker build -t haos-builder .
-
-      - name: 'Add release PKI certs'
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Build
-        run: |
-          BUILDER_UID="$(id -u)"
-          BUILDER_GID="$(id -g)"
-          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
-            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-            -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.prepare.outputs.version_dev }} ${{ matrix.board.defconfig }}
-
-      - name: Upload images
-        uses: burnett01/rsync-deployments@5.2
-        with:
-          rsh: -q
-          switches: -aW
-          path: release/
-          remote_path: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}/
-          remote_host: ${{ secrets.DEV_HOST }}
-          remote_port: ${{ secrets.DEV_PORT }}
-          remote_user: ${{ secrets.DEV_USERNAME }}
-          remote_key: ${{ secrets.DEV_SSH_KEY }}
-
-  bump_version:
-    name: Bump dev channel version
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [ build, prepare ]
-    runs-on: [ "ubuntu-20.04" ]
-
-    steps:
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS dev channel version to ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_main }}.${{ needs.prepare.outputs.version_dev }}
-        channel: "dev"

.github/workflows/label-actions.yml

@@ -14,4 +14,4 @@ jobs:
   action:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/label-actions@v2
+      - uses: dessant/label-actions@v3.1.0

.github/workflows/matrix.json

@@ -2,91 +2,103 @@
   {
     "id": "ova",
     "defconfig": "ova",
-    "runner": "x86-64-runner",
+    "architecture": "x86-64",
     "label": "board/ova"
   },
   {
     "id": "generic-x86-64",
     "defconfig": "generic_x86_64",
-    "runner": "x86-64-runner",
+    "architecture": "x86-64",
     "label": "board/generic-x86-64"
   },
   {
     "id": "generic-aarch64",
     "defconfig": "generic_aarch64",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/generic-aarch64"
   },
   {
     "id": "khadas-vim3",
     "defconfig": "khadas_vim3",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/khadas"
   },
   {
     "id": "odroid-c2",
     "defconfig": "odroid_c2",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/odroid"
   },
   {
     "id": "odroid-c4",
     "defconfig": "odroid_c4",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
+    "label": "board/odroid"
+  },
+  {
+    "id": "odroid-m1",
+    "defconfig": "odroid_m1",
+    "architecture": "aarch64",
     "label": "board/odroid"
   },
   {
     "id": "odroid-n2",
     "defconfig": "odroid_n2",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/odroid"
   },
   {
     "id": "odroid-xu4",
     "defconfig": "odroid_xu4",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/odroid"
   },
   {
     "id": "rpi2",
     "defconfig": "rpi2",
-    "runner": "arm-runner",
+    "architecture": "arm",
     "label": "board/raspberrypi"
   },
   {
     "id": "rpi3",
     "defconfig": "rpi3",
-    "runner": "arm-runner",
+    "architecture": "arm",
     "label": "board/raspberrypi"
   },
   {
     "id": "rpi3-64",
     "defconfig": "rpi3_64",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/raspberrypi"
   },
   {
     "id": "rpi4",
     "defconfig": "rpi4",
-    "runner": "arm-runner",
+    "architecture": "arm",
     "label": "board/raspberrypi"
   },
   {
     "id": "rpi4-64",
     "defconfig": "rpi4_64",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/raspberrypi"
   },
   {
     "id": "yellow",
     "defconfig": "yellow",
-    "runner": "aarch64-runner",
+    "architecture": "aarch64",
     "label": "board/yellow"
   },
+  {
+    "id": "green",
+    "defconfig": "green",
+    "architecture": "aarch64",
+    "label": "board/green"
+  },
   {
     "id": "tinker",
     "defconfig": "tinker",
-    "runner": "arm-runner",
+    "architecture": "arm",
     "label": "board/tinker"
   }
 ]

.github/workflows/pr-checks.yml

@@ -6,10 +6,10 @@ on: [pull_request]
 
 jobs:
   linters:
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
     - name: Check out code
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         submodules: true
 
@@ -19,9 +19,9 @@ jobs:
         dockerfile: Dockerfile
 
     - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@1.1.0
+      uses: ludeeus/action-shellcheck@2.0.0
       with:
-        ignore: buildroot buildroot-external/package/xe-guest-utilities
+        ignore: buildroot
 
     - name: Check buildroot-external packages
       run: |

.github/workflows/release-drafter.yml

@@ -3,6 +3,7 @@ name: Release Drafter
 on:
   push:
     branches:
+      - dev
       - rel-*
 
 jobs:

.github/workflows/release.yml

@@ -1,177 +0,0 @@
-# Home Assistant Operating System release build workflow
-
-name: Release build
-
-on:
-  release:
-    types: [published]
-
-jobs:
-  validate_release:
-    name: Validate release
-    runs-on: [ "ubuntu-20.04" ]
-    outputs:
-      version: ${{ steps.version_check.outputs.version }}
-      version_dev: ${{ steps.version_check.outputs.version_dev }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-    steps:
-      - uses: actions/checkout@v3
-      - name: Validate version
-        id: version_check
-        run: |
-          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
-          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
-          tag_major=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 1)
-          tag_build=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 2)
-          tag_dev=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 3)
-          if [ "${major}.${build}" != "${tag_major}.${tag_build}" ]; then
-            echo "Version number in Buildroot metadata is does not match tag (${major}.${build} vs ${{ github.event.release.tag_name }})."
-            exit 1
-          fi
-          if [ "" != "${tag_dev}" ]; then
-            echo "Note: Release build with custom dev part: ${tag_dev}."
-            echo "::set-output name=version::${major}.${build}.${tag_dev}"
-          else
-            echo "::set-output name=version::${major}.${build}"
-          fi
-          echo "::set-output name=version_dev::${tag_dev}"
-      - name: Create build matrix
-        uses: actions/github-script@v6
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            return { "board": boards }
-
-  build:
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
-    name: Release build for ${{ matrix.board.id }}
-    needs: validate_release
-    strategy:
-      matrix: ${{ fromJson(needs.validate_release.outputs.matrix) }}
-    runs-on: ${{ matrix.board.runner }}
-
-    steps:
-      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
-      - uses: actions/checkout@v3
-        with:
-          submodules: true
-
-      - name: Build container
-        run: docker build -t haos-builder .
-
-      - name: 'Add release PKI certs'
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Build
-        run: |
-          BUILDER_UID="$(id -u)"
-          BUILDER_GID="$(id -g)"
-          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
-            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-            -v "${{ matrix.board.runner }}-build-cache:/cache" \
-            -v "/build/output" \
-            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.defconfig }}
-
-      - name: Upload disk image
-        if: ${{ matrix.board.id != 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.img.xz
-          asset_content_type: application/x-xz
-
-      - name: Upload rauc update
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.raucb
-          asset_content_type: application/octet-stream
-
-      - name: Upload ova image
-        if: ${{ matrix.board.id == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.ova
-          asset_content_type: application/x-tar
-
-      - name: Upload qcow2 image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
-          asset_content_type: application/x-xz
-
-      - name: Upload vdi image
-        if: ${{ matrix.board.id == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vdi.zip
-          asset_content_type: application/zip
-
-      - name: Upload vhdx image
-        if: ${{ matrix.board.id == 'ova' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
-          asset_content_type: application/zip
-
-      - name: Upload vmdk image
-        if: ${{ matrix.board.id == 'ova' || matrix.board.id == 'generic-aarch64' }}
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_name: haos_${{ matrix.board.id }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
-          asset_content_type: application/zip
-
-  bump_version:
-    name: Bump dev version to ${{ needs.validate_release.outputs.version }}
-    needs: [ build, validate_release ]
-    runs-on: [ "ubuntu-20.04" ]
-
-    steps:
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS beta version
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.validate_release.outputs.version }}
-        channel: "beta"

.github/workflows/stale.yml

@@ -3,7 +3,7 @@ name: Stale
 # yamllint disable-line rule:truthy
 on:
   schedule:
-    - cron: "0 * * * *"
+    - cron: "40 5 * * *"
   workflow_dispatch:
 
 jobs:
@@ -19,7 +19,7 @@ jobs:
       # - No PRs marked as no-stale or pinned
       # - No issues marked as no-stale, help-wanted or pinned
       - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v5
+        uses: actions/stale@v8.0.0
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 90

.github/workflows/test.yaml

@@ -0,0 +1,94 @@
+name: Test HAOS image
+run-name: "Test HAOS ${{ inputs.version || format('(OS build #{0})', github.event.workflow_run.run_number) }}"
+
+on:
+  # Manual test of specified version
+  workflow_dispatch:
+    inputs:
+      version:
+        description: Version of HAOS to test
+        required: true
+        type: string
+
+  # Called by other workflows (e.g. build.yaml)
+  workflow_call:
+    inputs:
+      use-artifact:
+        # Workaround for GH weirdness: https://github.com/actions/runner/discussions/1884
+        description: Download OS image using actions/download-artifact
+        required: false
+        type: boolean
+        default: true
+
+jobs:
+  test:
+    if: ${{ github.event_name != 'workflow_run' || github.event.workflow_run.conclusion == 'success' }}
+
+    env:
+      NO_KVM: 1
+
+    name: Test in QEMU
+    runs-on: ubuntu-22.04
+    steps:
+      - name: Checkout source
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Install system dependencies
+        run: |
+          sudo apt update
+          sudo apt install -y qemu-system-x86 ovmf
+
+      - name: Setup Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: 3.12
+
+      - name: Install Python requirements
+        run:
+          pip install -r tests/requirements.txt
+
+      - name: Download HAOS image
+        if: ${{ !inputs.use-artifact }}
+        run: |
+          curl -sfL -o haos.qcow2.xz  https://os-artifacts.home-assistant.io/${{github.event.inputs.version}}/haos_ova-${{github.event.inputs.version}}.qcow2.xz
+
+      - name: Get OS image artifact
+        if: ${{ inputs.use-artifact }}
+        uses: actions/download-artifact@v3
+        with:
+          name: ova-image
+
+      - name: Extract OS image
+        run: |
+          xz -dc haos*.qcow2.xz > tests/haos.qcow2
+          rm haos*.qcow2.xz
+
+      - name: Run tests
+        run: |
+          ./tests/run_tests.sh
+
+      - name: Archive logs
+        uses: actions/upload-artifact@v3
+        if: always()
+        with:
+          name: logs
+          path: |
+            tests/lg_logs/**
+
+      - name: Archive JUnit reports
+        uses: actions/upload-artifact@v3
+        if: always()
+        with:
+          name: junit_reports
+          path: |
+            tests/junit_reports/*.xml
+
+      - name: Publish test report
+        uses: mikepenz/action-junit-report@v4
+        if: always()
+        with:
+          report_paths: 'tests/junit_reports/*.xml'
+          annotate_only: true
+          detailed_summary: true

.gitignore

@@ -1,4 +1,12 @@
+# OS generated files
 .DS_Store
+
+# Build output dirs
 /release
-*.pem
 output*/
+
+# Certificates
+*.pem
+
+# vscode generated files
+.vscode*

.gitmodules

@@ -1,4 +1,4 @@
 [submodule "buildroot"]
 	path = buildroot
 	url = https://github.com/home-assistant/buildroot.git
-	branch = 2021.02.x-haos
+	branch = 2022.02.x-haos

.os-artifacts/index.html

@@ -0,0 +1,82 @@
+<!DOCTYPE html>
+<html>
+    <head>
+        <title>Home Assistant OS - development builds</title>
+        <link rel="shortcut icon" href="https://brands.home-assistant.io/homeassistant/icon.png">
+        <style>
+            body {
+                font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif;
+            }
+
+            .error {
+                color: maroon;
+            }
+            </style>
+    </head>
+    <body>
+        <h1>Home Assistant OS - development builds</h1>
+        <select id="os-builds"></select>
+        <div id="os-builds-list"></div>
+        <script>
+            const buildSelect = document.getElementById('os-builds');
+            const osBuildsList = document.getElementById('os-builds-list');
+
+            const fillVersions = async () => {
+                try {
+                    const response = await fetch('/index.json');
+                    if (!response.ok) {
+                        const p = document.createElement('p');
+                        p.className = "error";
+                        p.textContent = "Could not load version index file.";
+                        osBuildsList.appendChild(p);
+                        return;
+                    }
+                    const items = await response.json();
+                    items.reverse();
+
+                    items.forEach(buildVersion => {
+                        buildSelect.appendChild(new Option(buildVersion, buildVersion));
+                    });
+
+                    buildSelect.dispatchEvent(new Event('change'));
+                } catch (error) {
+                    console.error('Error fetching data:', error);
+                }
+            }
+
+            buildSelect.addEventListener('change', async function() {
+                osBuildsList.innerHTML = '';
+
+                const buildVersion = this.value;
+
+                try {
+                    const response = await fetch(`/indexes/${buildVersion}.json`);
+                    if (!response.ok) {
+                        const p = document.createElement('p');
+                        p.className = "error";
+                        p.textContent = `Could not load index file for version ${buildVersion}.`;
+                        osBuildsList.appendChild(p);
+                        return;
+                    }
+                    const images = await response.json();
+
+                    const ul = document.createElement('ul');
+                    images.forEach(image => {
+                        const li = document.createElement('li');
+                        const a = document.createElement('a');
+                        a.href =`/${buildVersion}/${image}`;
+                        a.textContent = image;
+                        li.appendChild(a);
+                        ul.appendChild(li);
+                    });
+
+                    osBuildsList.appendChild(ul);
+                } catch (error) {
+                    console.error('Error fetching images:', error);
+                }
+            });
+
+            fillVersions();
+        </script>
+    </body>
+</html>

Documentation/boards/README.md

@@ -5,26 +5,25 @@
 The following boards/devices are supported:
 
 - Raspberry Pi
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 64-bit (recommended)
-  - Pi 4 Model B (1 GB, 2 GB, 4 GB and 8 GB model) 32-bit
-  - Pi 3 Model B and B+ 64-bit (recommended)
-  - Pi 3 Model B and B+ 32-bit
-  - Pi 2 (not recommended)
-  - Pi Zero-W (not recommended)
-  - Pi (not recommended)
+  - Pi 4 Model B ([1 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-1gb), [2 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-2gb), [4 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-4gb) and [8 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-8gb) model) 32-bit or 64-bit (recommended)
+  - [Pi 3 Model B](https://www.raspberrypi.com/products/raspberry-pi-3-model-b/) and [B+](https://www.raspberrypi.com/products/raspberry-pi-3-model-b-plus/) 32-bit or 64-bit (recommended)
+  - [Pi 2](https://www.raspberrypi.com/products/raspberry-pi-2-model-b/) (not recommended)
+  - [Pi Zero-W](https://www.raspberrypi.com/products/raspberry-pi-zero-w/) (not recommended)
+  - [Pi](https://www.raspberrypi.com/products/raspberry-pi-1-model-b-plus/) (not recommended)
 - Hardkernel
-  - Odroid-N2
-  - Odroid-N2+
-  - Odroid-C2
-  - Odroid-C4
-  - Odroid-XU4
+  - [ODROID-C2](https://www.hardkernel.com/shop/odroid-c2/) (discontinued)
+  - [ODROID-C4](https://www.hardkernel.com/shop/odroid-c4/)
+  - [ODROID-M1](https://www.hardkernel.com/shop/odroid-m1/)
+  - [ODROID-N2](https://www.hardkernel.com/shop/odroid-n2/) (discontinued)
+  - ODROID-N2+ [2 GB](https://www.hardkernel.com/shop/odroid-n2-with-2gbyte-ram-2/) or [4 GB](https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2/)
+  - [ODROID-XU4](https://www.hardkernel.com/shop/odroid-xu4-special-price/)
 - Asus
-  - Tinker Board
+  - [Tinker Board](https://tinker-board.asus.com/product/tinker-board.html)
 - Generic x86-64 (UEFI, not suited for virtualization)
-  - Intel NUC5CPYH
-  - Intel NUC6CAYH
-  - Intel NUC10I3FNK2
-  - Gigabyte GB-BPCE-3455
+  - [Intel NUC5CPYH](https://www.intel.com/content/www/us/en/products/sku/85254/intel-nuc-kit-nuc5cpyh/specifications.html)
+  - [Intel NUC6CAYH](https://www.intel.com/content/www/us/en/products/sku/95062/intel-nuc-kit-nuc6cayh/specifications.html)
+  - [Intel NUC10I3FNK2](https://www.intel.com/content/www/us/en/products/sku/195503/intel-nuc-10-performance-kit-nuc10i3fnk/specifications.html)
+  - [Gigabyte GB-BPCE-3455](https://www.gigabyte.com/Mini-PcBarebone/GB-BPCE-3455-rev-10/sp#sp)
   - Computers supporting x86-64 architecture and UEFI boot should generally work
 - Virtual appliance (x86_64/UEFI):
   - VMDK
@@ -45,10 +44,11 @@ Notes:
 |Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
 |Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
 |Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|Odroid-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|Odroid-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|ODROID-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|ODROID-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|ODROID-M1     |`make odroid_m1`     |[odroid_m1](../../buildroot-external/configs/odroid_m1_defconfig)|[hardkernel](./hardkernel/)|
+|ODROID-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|ODROID-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
 |Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
 |Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
 |OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/hardkernel/README.md

@@ -4,10 +4,11 @@
 
 | Device         | Release Date  | Support      | Config    |
 |----------------|---------------|--------------|-----------|
-| ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
 | ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-C4      | 2020          | yes          | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-M1      | 2022          | yes          | [odroid_m1](../../../buildroot-external/configs/odroid_m1_defconfig) |
 | ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
+| ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
 
 See separate documentation for each board.
 

Documentation/boards/hardkernel/odroid-c2.md

@@ -1,4 +1,4 @@
-# Odroid-C2
+# ODROID-C2
 
 ## eMMC
 

Documentation/boards/hardkernel/odroid-c4.md

@@ -1,10 +1,10 @@
-# Odroid-C4
+# ODROID-C4
 
 ## Experimental
 
-Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
+ODROID-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
 
-Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
+Please also refer to the documentation pages for the [ODROID-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
 
 Common C4 issues that have been specifically tested and appear to be working:
 - boot from SD

Documentation/boards/hardkernel/odroid-m1.md

@@ -0,0 +1,50 @@
+# ODROID-M1
+
+Home Assistant OS 10 and newer support the ODROID-M1 board.
+
+## SD-card
+
+SD-card boot is supported via on-board bootloader (SPL) or recovery button.
+
+## eMMC
+
+eMMC boot via on-board bootloader requires the latest version of Petitboot
+(spiboot 20230328). To install the latest version download the SPI boot image
+from [linuxfactory.or.kr][1] as follows:
+
+1. Download `spiupdate_odroidm1_20220304.img.xz`
+2. Use balenaEtcher or another tool to flash the updater onto an SD card
+3. Download `spiboot-20230328.img`
+4. Rename the `spiboot-20230328.img` file to`spiboot.img`.
+5. Paste the `spiboot.img` file onto the FAT partition of that same SD card.
+6. Plug-in that SD card to your ODROID-M1. Petitboot will update itself, you can verify the progress on the HDMI output.
+7. If you see the version 20230328 in the top right corner, the installation was successful.
+  * If you see any other version there, the installation failed. 
+
+Once Petitboot is updated you can flash Home Assistant OS directly onto an eMMC.
+
+## NVMe
+
+Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
+
+## Technical notes on boot flow
+
+The Home Assistant OS image is bootable by the SoC directly. This means that no help
+from the Hardkernel provided and pre-installed bootloader Petitboot is necessary.
+However, the ODROID-M1 automatically boots from internal SPI. To boot
+directly off the SD-card or eMMC you need to press the recovery button.
+
+The SPI flashed U-Boot SPL tries searches for an U-Boot binary on the SD-card
+(and from eMMC with Petitboot 20230328 and later). This mechanism allows you to
+boot the Home Assistant OS U-Boot without pressing the recovery button.
+
+## Console
+
+By default, console access is available on the serial header (CON1) and on HDMI.
+The serial console's baudrate is 1500000 by default.
+
+The systemd startup messages will only appear on the serial console by default.
+To show the messages on the HDMI console instead, add the console manually
+to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).
+
+[1]: http://ppa.linuxfactory.or.kr/images/petitboot/odroidm1/

Documentation/boards/hardkernel/odroid-n2.md

@@ -1,4 +1,4 @@
-# Odroid-N2
+# ODROID-N2
 
 ## eMMC
 

Documentation/configuration.md

@@ -25,8 +25,7 @@ hassos-xy.raucb
 
 Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
 
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
-API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*
+You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later using `ha os import` from the CLI or by calling `systemctl restart hassos-config` on the OS shell. *The USB Stick just needs to be inserted to the device during this setup process and can be removed afterwards.*
 
 ## Local
 
@@ -54,7 +53,7 @@ Our default NTP configuration look like:
 
 ```
 [Time]
-NTP=time1.google.com time2.google.com time3.google.com
+NTP=time.cloudflare.com
 FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
 ```
 

Documentation/kernel.md

@@ -1,22 +1,24 @@
 
 # Kernel Version
 
-Default Kernel tree: 5.15
+Default Kernel tree: 6.1
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.15.64 |
-| Raspberry Pi | 5.15.32 |
-| Raspberry Pi 0-W | 5.15.32 |
-| Raspberry Pi 2 | 5.15.32 |
-| Raspberry Pi 3 | 5.15.32 |
-| Raspberry Pi 4 | 5.15.32 |
-| Home Assistant Yellow | 5.15.32 |
-| Tinker Board | 5.15.64 |
-| Odroid-C2 | 5.15.64 |
-| Odroid-C4 | 5.15.64 |
-| Odroid-N2 | 5.15.64 |
-| Odroid-XU4 | 5.15.64 |
-| Generic aarch64 | 5.15.64 |
-| Generic x86-64 | 5.15.64 |
-| Khadas VIM3 | 5.15.64 |
+| Open Virtual Appliance | 6.1.60 |
+| Raspberry Pi | 6.1.58 |
+| Raspberry Pi 0-W | 6.1.58 |
+| Raspberry Pi 2 | 6.1.58 |
+| Raspberry Pi 3 | 6.1.58 |
+| Raspberry Pi 4 | 6.1.58 |
+| Home Assistant Yellow | 6.1.58 |
+| Home Assistant Green | 6.1.60 |
+| Tinker Board | 6.1.60 |
+| ODROID-C2 | 6.1.60 |
+| ODROID-C4 | 6.1.60 |
+| ODROID-M1 | 6.1.60 |
+| ODROID-N2 | 6.1.60 |
+| ODROID-XU4 | 6.1.60 |
+| Generic aarch64 | 6.1.60 |
+| Generic x86-64 | 6.1.60 |
+| Khadas VIM3 | 6.1.60 |

Documentation/network.md

@@ -188,6 +188,6 @@ If you now view the default connection `cat /etc/NetworkManager/system-connectio
 
 Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.
 
-[nm-manual]: https://developer.gnome.org/NetworkManager/stable/manpages.html
+[nm-manual]: https://networkmanager.dev/docs/api/1.40/manpages.html
 [configuration-usb]: configuration.md
-[uuid]: https://www.uuidgenerator.net/
+[uuid]: https://www.uuidgenerator.net/version4

Makefile

@@ -1,11 +1,8 @@
 BUILDDIR:=$(shell pwd)
-RELEASE_DIR = $(BUILDDIR)/release
 
 BUILDROOT=$(BUILDDIR)/buildroot
 BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
 DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
-VERSION_DATE := $(shell date --utc +'%Y%m%d')
-VERSION_DEV := "dev$(VERSION_DATE)"
 
 TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
 TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
@@ -23,9 +20,6 @@ endif
 
 all: $(TARGETS)
 
-$(RELEASE_DIR):
-	mkdir -p $(RELEASE_DIR)
-
 savedefconfig:
 	@echo "config $*"
 	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "savedefconfig"
@@ -34,10 +28,9 @@ $(TARGETS_CONFIG): %-config:
 	@echo "config $*"
 	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
 
-$(TARGETS): %: $(RELEASE_DIR) %-config
+$(TARGETS): %: %-config
 	@echo "build $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
-	cp -f $(O)/images/haos_* $(RELEASE_DIR)/
+	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
 
 	# Do not clean when building for one target
 ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)

README.md

@@ -2,7 +2,7 @@
 
 Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
 
-Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
+Home Assistant Operating System uses Docker as its container engine. By default it deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
 
 ## Features
 
@@ -55,4 +55,4 @@ The Home Assistant Operating System documentation can be found on the [Home Assi
 
 The Development build GitHub Action Workflow is a manually triggered workflow
 which creates Home Assistant OS development builds. The development builds are
-available at [os-builds.home-assistant.io](https://os-builds.home-assistant.io/).
+available at [https://os-artifacts.home-assistant.io/index.html](https://os-artifacts.home-assistant.io/index.html).

buildroot-external/Config.in

@@ -8,10 +8,11 @@ source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8821cu/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"

buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg

@@ -15,34 +15,52 @@ for SLOT in $ORDER; do
         INDEX=0
         OK=$A_OK
         TRY=$A_TRY
-        A_TRY=1
     fi
     if [ "$SLOT" == "B" ]; then
         INDEX=1
         OK=$B_OK
         TRY=$B_TRY
-        B_TRY=1
     fi
-    if [ "$OK" -eq 1 -a "$TRY" -eq 0 ]; then
+    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
         default=$INDEX
+
+        # increment attempts and save back to slot
+        if [ "$TRY" -eq 1 ]; then
+            TRY=2
+        elif [ "$TRY" -eq 2 ]; then
+            TRY=3
+	else
+            TRY=1
+        fi
+
+	if [ "$SLOT" == "A" ]; then
+            A_TRY=$TRY
+        fi
+	if [ "$SLOT" == "B" ]; then
+            B_TRY=$TRY
+        fi
+
         break
     fi
 done
 
-# reset booted flags
+# No bootable slot found, choose rescue...
 if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 -a "$A_TRY" -eq 1 ]; then
-        A_TRY=0
+    if [ "$A_OK" -eq 1 ]; then
+        default=2
     fi
-    if [ "$B_OK" -eq 1 -a "$B_TRY" -eq 1 ]; then
-        B_TRY=0
+    if [ "$B_OK" -eq 1 ]; then
+        default=3
     fi
-    default=0
+fi
+
+if [ "$MACHINE_ID" == "" ]; then
+    boot_condition="systemd.condition-first-boot=true"
 fi
 
 save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
 
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=$MACHINE_ID cgroup_enable=memory fsck.repair=yes"
+default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
 file_env -f ($root)/cmdline.txt cmdline
 
 # root is a full HDD/partition definition in GRUB format like hd0,gpt1
@@ -57,3 +75,11 @@ menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
 menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
     linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
 }
+
+menuentry "Slot A (rescue shell)" {
+    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
+}
+
+menuentry "Slot B (rescue shell)" {
+    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
+}

buildroot-external/board/arm-uefi/generic-aarch64/kernel.config

@@ -18,3 +18,15 @@ CONFIG_BLK_DEV_NVME=y
 CONFIG_NVME_HWMON=y
 
 CONFIG_DRM_VIRTIO_GPU=m
+
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_HYPERV=y
+CONFIG_HYPERV_UTILS=m
+CONFIG_HYPERV_BALLOON=m
+CONFIG_HYPERV_KEYBOARD=m
+CONFIG_HYPERV_STORAGE=y
+CONFIG_HYPERV_NET=y
+CONFIG_HYPERV_VSOCKETS=m
+CONFIG_PCI_HYPERV=m
+CONFIG_PCI_HYPERV_INTERFACE=m
+CONFIG_FB_HYPERV=y

buildroot-external/board/arm-uefi/generic-aarch64/meta

@@ -4,6 +4,7 @@ CHASSIS=embedded
 BOOTLOADER=grub
 KERNEL_FILE=Image
 BOOT_SYS=efi
+BOOT_SIZE=32M
 BOOT_SPL=false
 DISK_SIZE=6
 SUPERVISOR_MACHINE=qemuarm-64

buildroot-external/board/asus/tinker/meta

@@ -4,7 +4,9 @@ CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
 BOOT_SYS=hybrid
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x8000
 SUPERVISOR_MACHINE=tinker
 SUPERVISOR_ARCH=armv7

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,5 +1,5 @@
-From ff0c5c49024da05b47d4fcc4d115761c43eef7a6 Mon Sep 17 00:00:00 2001
-Message-Id: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 3553f8a938dbb498aa1846a37ea343b7f53739da Mon Sep 17 00:00:00 2001
+Message-Id: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Feb 2021 19:55:41 +0100
 Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
@@ -11,7 +11,7 @@ This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
  1 file changed, 8 deletions(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 4dcdcf17c977..ff6faa82192b 100644
+index 487b0e03d4b4..1569b1824c89 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
 @@ -378,8 +378,6 @@ uart0: serial@ff180000 {
@@ -51,5 +51,5 @@ index 4dcdcf17c977..ff6faa82192b 100644
  		pinctrl-0 = <&uart4_xfer>;
  		status = "disabled";
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,7 +1,7 @@
-From e73b4b762a0842cc75b2784e4c4267f6f4fc50c4 Mon Sep 17 00:00:00 2001
-Message-Id: <e73b4b762a0842cc75b2784e4c4267f6f4fc50c4.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 695638c05c0bb6f7bcc65e172dd132b3aa280b47 Mon Sep 17 00:00:00 2001
+Message-Id: <695638c05c0bb6f7bcc65e172dd132b3aa280b47.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:15:14 +0100
 Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
@@ -21,10 +21,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 19 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 9c1e38c54eae..cf278bcc91ad 100644
+index 09618bb7d872..30430d2e64b9 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -485,6 +485,25 @@ &sdio0 {
+@@ -483,6 +483,25 @@ &sdio0 {
  	status = "okay";
  };
  
@@ -51,5 +51,5 @@ index 9c1e38c54eae..cf278bcc91ad 100644
  	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
  	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,7 +1,7 @@
-From 00de5155d12a178b83961f459ddccd7fa08ec25c Mon Sep 17 00:00:00 2001
-Message-Id: <00de5155d12a178b83961f459ddccd7fa08ec25c.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From d04122215cb56b57458e05b475e41744b8126533 Mon Sep 17 00:00:00 2001
+Message-Id: <d04122215cb56b57458e05b475e41744b8126533.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 4 Sep 2020 21:57:55 +0200
 Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
@@ -14,10 +14,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 8 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index cf278bcc91ad..f23c6efd39d4 100644
+index 30430d2e64b9..395afc2b2283 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -344,10 +344,18 @@ regulator-state-mem {
+@@ -342,10 +342,18 @@ regulator-state-mem {
  	};
  };
  
@@ -37,5 +37,5 @@ index cf278bcc91ad..f23c6efd39d4 100644
  	status = "okay";
  };
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch

@@ -1,7 +1,7 @@
-From e45da42e71e4f92995d5ec11679ca00b0971dbfe Mon Sep 17 00:00:00 2001
-Message-Id: <e45da42e71e4f92995d5ec11679ca00b0971dbfe.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 7d37754f29c379c5066c6abf38c8d01d654b1613 Mon Sep 17 00:00:00 2001
+Message-Id: <7d37754f29c379c5066c6abf38c8d01d654b1613.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Thu, 19 Oct 2017 21:24:47 +0200
 Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
@@ -17,7 +17,7 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index ff6faa82192b..5061c5418d75 100644
+index 1569b1824c89..478fd1bb85df 100644
 --- a/arch/arm/boot/dts/rk3288.dtsi
 +++ b/arch/arm/boot/dts/rk3288.dtsi
 @@ -311,7 +311,7 @@ spi2: spi@ff130000 {
@@ -30,5 +30,5 @@ index ff6faa82192b..5061c5418d75 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,7 +1,7 @@
-From e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0 Mon Sep 17 00:00:00 2001
-Message-Id: <e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 05fde1d1dbbe7805a58a8c445b8fb19e0df59826 Mon Sep 17 00:00:00 2001
+Message-Id: <05fde1d1dbbe7805a58a8c445b8fb19e0df59826.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 20:16:05 +0100
 Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
@@ -14,10 +14,10 @@ Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index f23c6efd39d4..cdff130d1292 100644
+index 395afc2b2283..c7e79e594720 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -186,7 +186,7 @@ vdd_cpu: DCDC_REG1 {
+@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
  				regulator-always-on;
  				regulator-boot-on;
  				regulator-min-microvolt = <750000>;
@@ -27,5 +27,5 @@ index f23c6efd39d4..cdff130d1292 100644
  				regulator-ramp-delay = <6000>;
  				regulator-state-mem {
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch

@@ -1,7 +1,7 @@
-From e073d75cd0dbfbcbbf1b46e565b326db37b75e6a Mon Sep 17 00:00:00 2001
-Message-Id: <e073d75cd0dbfbcbbf1b46e565b326db37b75e6a.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 940d61e1e04929166d5a2bcbc1934aa931952ca5 Mon Sep 17 00:00:00 2001
+Message-Id: <940d61e1e04929166d5a2bcbc1934aa931952ca5.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: Myy Miouyouyou <myy@miouyouyou.fr>
 Date: Sun, 7 Jan 2018 01:52:44 +0100
 Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
@@ -24,7 +24,7 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
  1 file changed, 66 insertions(+)
 
 diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index d36991acd6df..a526927e29df 100644
+index 2a99f15f527f..181718374429 100644
 --- a/drivers/mmc/host/dw_mmc-rockchip.c
 +++ b/drivers/mmc/host/dw_mmc-rockchip.c
 @@ -12,6 +12,11 @@
@@ -39,7 +39,7 @@ index d36991acd6df..a526927e29df 100644
  #include "dw_mmc.h"
  #include "dw_mmc-pltfm.h"
  
-@@ -330,6 +335,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
+@@ -340,6 +345,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
  };
  MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
  
@@ -106,7 +106,7 @@ index d36991acd6df..a526927e29df 100644
  static int dw_mci_rockchip_probe(struct platform_device *pdev)
  {
  	const struct dw_mci_drv_data *drv_data;
-@@ -357,6 +422,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+@@ -367,6 +432,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
  	}
  
  	pm_runtime_put_autosuspend(&pdev->dev);
@@ -115,5 +115,5 @@ index d36991acd6df..a526927e29df 100644
  	return 0;
  }
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch

@@ -1,7 +1,7 @@
-From 392472dc977300a9f2a62159c105a6dfed878643 Mon Sep 17 00:00:00 2001
-Message-Id: <392472dc977300a9f2a62159c105a6dfed878643.1652225232.git.stefan@agner.ch>
-In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
-References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
+From 479e2acb95c09b15382b3766391294790ebd200b Mon Sep 17 00:00:00 2001
+Message-Id: <479e2acb95c09b15382b3766391294790ebd200b.1676488094.git.stefan@agner.ch>
+In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
+References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Tue, 10 May 2022 22:57:26 +0200
 Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
@@ -15,10 +15,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 26 insertions(+)
 
 diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index cdff130d1292..e904c130dedc 100644
+index c7e79e594720..5d261fae6e72 100644
 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
 +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -388,6 +388,20 @@ bl_en: bl-en {
+@@ -386,6 +386,20 @@ bl_en: bl-en {
  		};
  	};
  
@@ -39,7 +39,7 @@ index cdff130d1292..e904c130dedc 100644
  	buttons {
  		pwrbtn: pwrbtn {
  			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -520,6 +534,18 @@ &tsadc {
+@@ -518,6 +532,18 @@ &tsadc {
  
  &uart0 {
  	status = "okay";
@@ -59,5 +59,5 @@ index cdff130d1292..e904c130dedc 100644
  
  &uart1 {
 -- 
-2.36.1
+2.39.1
 

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -16,8 +16,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/kernel-amlogic.config

@@ -145,7 +145,6 @@ CONFIG_CGROUP_WRITEBACK=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 # CONFIG_CGROUP_RDMA is not set
 CONFIG_CGROUP_FREEZER=y
@@ -1617,8 +1616,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 CONFIG_FW_LOADER_PAGED_BUF=y
 CONFIG_EXTRA_FIRMWARE=""
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 # CONFIG_FW_LOADER_COMPRESS is not set
 CONFIG_FW_CACHE=y
 # end of Firmware loader

buildroot-external/board/hardkernel/odroid-c2/meta

@@ -1,10 +1,12 @@
 BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel Odroid-C2"
+BOARD_NAME="Hardkernel ODROID-C2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -18,8 +18,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -1,10 +1,12 @@
 BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel Odroid-C4"
+BOARD_NAME="Hardkernel ODROID-C4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c4
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -18,8 +18,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+# shellcheck disable=SC2155
+
+function hassos_pre_image() {
+    local BOOT_DATA="$(path_boot_dir)"
+    local SPL_IMG="$(path_spl_img)"
+
+    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
+    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
+
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
+    dd if="${BINARIES_DIR}/u-boot.itb" of="${SPL_IMG}" conv=notrunc bs=512 seek=16384
+}
+
+
+function hassos_post_image() {
+    convert_disk_image_xz
+}
+

buildroot-external/board/hardkernel/odroid-m1/kernel.config

@@ -0,0 +1,11 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+
+CONFIG_THERMAL_GOV_BANG_BANG=y
+CONFIG_SENSORS_GPIO_FAN=y
+
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+
+CONFIG_MMC_SDHCI_OF_DWCMSHC=y
+
+# CONFIG_DW_WATCHDOG is not set

buildroot-external/board/hardkernel/odroid-m1/meta

@@ -0,0 +1,12 @@
+BOARD_ID=odroid-m1
+BOARD_NAME="Hardkernel ODROID-M1"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=Image
+BOOT_SYS=gpt
+BOOT_SIZE=16M
+BOOT_SPL=true
+BOOT_SPL_SIZE=16M
+BOOT_ENV_SIZE=0x8000
+SUPERVISOR_MACHINE=odroid-m1
+SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0001-arm64-dts-rockchip-Add-Hardkernel-ODROID-M1-board.patch

@@ -0,0 +1,455 @@
+From d388735d551e09b00317a509859fca51776b9826 Mon Sep 17 00:00:00 2001
+Message-ID: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Dongjin Kim <tobetter@gmail.com>
+Date: Fri, 30 Sep 2022 07:12:35 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
+
+This patch is to add a device tree for new board Hardkernel ODROID-M1
+based on Rockchip RK3568, includes basic peripherals -
+uart/eMMC/uSD/i2c and on-board ethernet.
+
+Signed-off-by: Dongjin Kim <tobetter@gmail.com>
+[aurelien@aurel32.net: addressed issues from initial review]
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 414 ++++++++++++++++++
+ 2 files changed, 415 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+
+diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
+index 8c15593c0ca4..5dc1607b3ecf 100644
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -71,4 +71,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+new file mode 100644
+index 000000000000..b3016437640b
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -0,0 +1,414 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Hardkernel Co., Ltd.
++ *
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include "rk3568.dtsi"
++
++/ {
++	model = "Hardkernel ODROID-M1";
++	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
++
++	aliases {
++		ethernet0 = &gmac0;
++		i2c0 = &i2c3;
++		i2c3 = &i2c0;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc0;
++		serial0 = &uart1;
++		serial1 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	dc_12v: dc-12v-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "dc_12v";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <12000000>;
++		regulator-max-microvolt = <12000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_power: led-0 {
++			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_POWER;
++			color = <LED_COLOR_ID_RED>;
++			default-state = "keep";
++			linux,default-trigger = "default-on";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_power_pin>;
++		};
++		led_work: led-1 {
++			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_HEARTBEAT;
++			color = <LED_COLOR_ID_BLUE>;
++			linux,default-trigger = "heartbeat";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_work_pin>;
++		};
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&dc_12v>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "output";
++	phy-handle = <&rgmii_phy0>;
++	phy-mode = "rgmii";
++	phy-supply = <&vcc3v3_sys>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac0_miim
++		     &gmac0_tx_bus2
++		     &gmac0_rx_bus2
++		     &gmac0_rgmii_clk
++		     &gmac0_rgmii_bus>;
++	status = "okay";
++
++	tx_delay = <0x4f>;
++	rx_delay = <0x2d>;
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc3v3_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int_l>;
++		rockchip,system-power-controller;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-always-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-always-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&mdio0 {
++	rgmii_phy0: ethernet-phy@0 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x0>;
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&pinctrl {
++	leds {
++		led_power_pin: led-power-pin {
++			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		led_work_pin: led-work-pin {
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_3v3>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
++	disable-wp;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	sd-uhs-sdr50;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0002-arm64-dts-rockchip-add-thermal-support-to-ODROID-M1.patch

@@ -0,0 +1,38 @@
+From 24048c1753916bd983746542b16d19d2b399eeb7 Mon Sep 17 00:00:00 2001
+Message-ID: <24048c1753916bd983746542b16d19d2b399eeb7.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:36 +0200
+Subject: [PATCH] arm64: dts: rockchip: add thermal support to ODROID-M1
+
+Add the thermal nodes for the ODROID-M1.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-4-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index b3016437640b..112c65af3f55 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -409,6 +409,12 @@ &sdmmc0 {
+ 	status = "okay";
+ };
+ 
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
+ &uart2 {
+ 	status = "okay";
+ };
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0003-arm64-dts-rockchip-Add-NOR-flash-to-ODROID-M1.patch

@@ -0,0 +1,103 @@
+From 982bb2beab8e38a7c0a365770be2ad9c5221a650 Mon Sep 17 00:00:00 2001
+Message-ID: <982bb2beab8e38a7c0a365770be2ad9c5221a650.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:37 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add NOR flash to ODROID-M1
+
+Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add
+the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode
+and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn
+pin.
+
+The partitions addresses and sizes are taken from the ODROID-M1
+Partition Table page on the ODROID wiki.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-5-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 58 +++++++++++++++++++
+ 1 file changed, 58 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 112c65af3f55..94e839c9afab 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -351,6 +351,20 @@ rgmii_phy0: ethernet-phy@0 {
+ };
+ 
+ &pinctrl {
++	fspi {
++		fspi_dual_io_pins: fspi-dual-io-pins {
++			rockchip,pins =
++				/* fspi_clk */
++				<1 RK_PD0 1 &pcfg_pull_none>,
++				/* fspi_cs0n */
++				<1 RK_PD3 1 &pcfg_pull_none>,
++				/* fspi_d0 */
++				<1 RK_PD1 1 &pcfg_pull_none>,
++				/* fspi_d1 */
++				<1 RK_PD2 1 &pcfg_pull_none>;
++		};
++	};
++
+ 	leds {
+ 		led_power_pin: led-power-pin {
+ 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+@@ -409,6 +423,50 @@ &sdmmc0 {
+ 	status = "okay";
+ };
+ 
++&sfc {
++	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
++	pinctrl-0 = <&fspi_dual_io_pins>;
++	pinctrl-names = "default";
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <100000000>;
++		spi-rx-bus-width = <2>;
++		spi-tx-bus-width = <1>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "SPL";
++				reg = <0x0 0xe0000>;
++			};
++			partition@e0000 {
++				label = "U-Boot Env";
++				reg = <0xe0000 0x20000>;
++			};
++			partition@100000 {
++				label = "U-Boot";
++				reg = <0x100000 0x200000>;
++			};
++			partition@300000 {
++				label = "splash";
++				reg = <0x300000 0x100000>;
++			};
++			partition@400000 {
++				label = "Filesystem";
++				reg = <0x400000 0xc00000>;
++			};
++		};
++	};
++};
++
+ &tsadc {
+ 	rockchip,hw-tshut-mode = <1>;
+ 	rockchip,hw-tshut-polarity = <0>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0004-arm64-dts-rockchip-Add-analog-audio-on-ODROID-M1.patch

@@ -0,0 +1,102 @@
+From ae25f92a09abb7dd16a9ad3b74e0c105b385f214 Mon Sep 17 00:00:00 2001
+Message-ID: <ae25f92a09abb7dd16a9ad3b74e0c105b385f214.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:38 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add analog audio on ODROID-M1
+
+On the ODROID-M1, the I2S1 TDM controller is connected to the rk809
+codec in I2S mode. It is used to provide a stereo headphones output and
+a mono speaker output. A GPIO with an external pullup is used as an
+headphone detection input.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-6-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 43 ++++++++++++++++++-
+ 1 file changed, 42 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 94e839c9afab..634c1bd80b4e 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -59,6 +59,31 @@ led_work: led-1 {
+ 		};
+ 	};
+ 
++	rk809-sound {
++		compatible = "simple-audio-card";
++		pinctrl-names = "default";
++		pinctrl-0 = <&hp_det_pin>;
++		simple-audio-card,name = "Analog RK817";
++		simple-audio-card,format = "i2s";
++		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
++		simple-audio-card,mclk-fs = <256>;
++		simple-audio-card,widgets =
++			"Headphone", "Headphones",
++			"Speaker", "Speaker";
++		simple-audio-card,routing =
++			"Headphones", "HPOL",
++			"Headphones", "HPOR",
++			"Speaker", "SPKO";
++
++		simple-audio-card,cpu {
++			sound-dai = <&i2s1_8ch>;
++		};
++
++		simple-audio-card,codec {
++			sound-dai = <&rk809>;
++		};
++	};
++
+ 	vcc3v3_sys: vcc3v3-sys-regulator {
+ 		compatible = "regulator-fixed";
+ 		regulator-name = "vcc3v3_sys";
+@@ -131,10 +156,15 @@ rk809: pmic@20 {
+ 		reg = <0x20>;
+ 		interrupt-parent = <&gpio0>;
+ 		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
++		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ 		#clock-cells = <1>;
++		clock-names = "mclk";
++		clocks = <&cru I2S1_MCLKOUT_TX>;
+ 		pinctrl-names = "default";
+-		pinctrl-0 = <&pmic_int_l>;
++		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+ 		rockchip,system-power-controller;
++		#sound-dai-cells = <0>;
+ 		vcc1-supply = <&vcc3v3_sys>;
+ 		vcc2-supply = <&vcc3v3_sys>;
+ 		vcc3-supply = <&vcc3v3_sys>;
+@@ -340,6 +370,11 @@ regulator-state-mem {
+ 	};
+ };
+ 
++&i2s1_8ch {
++	rockchip,trcm-sync-tx-only;
++	status = "okay";
++};
++
+ &mdio0 {
+ 	rgmii_phy0: ethernet-phy@0 {
+ 		compatible = "ethernet-phy-ieee802.3-c22";
+@@ -379,6 +414,12 @@ pmic_int_l: pmic-int-l {
+ 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ 		};
+ 	};
++
++	rk809 {
++		hp_det_pin: hp-det-pin {
++			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
+ };
+ 
+ &pmu_io_domains {
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0005-arm64-dts-rockchip-Enable-vop2-and-hdmi-tx-on-ODROID.patch

@@ -0,0 +1,97 @@
+From 3a1be3d8719ef6335385d4e5e456371e7bf7383f Mon Sep 17 00:00:00 2001
+Message-ID: <3a1be3d8719ef6335385d4e5e456371e7bf7383f.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:39 +0200
+Subject: [PATCH] arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1
+
+Enable the RK356x Video Output Processor (VOP) 2 on ODROID M1.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-7-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 47 +++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 634c1bd80b4e..126b893048fe 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -8,6 +8,7 @@
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
+ #include "rk3568.dtsi"
+ 
+ / {
+@@ -37,6 +38,17 @@ dc_12v: dc-12v-regulator {
+ 		regulator-max-microvolt = <12000000>;
+ 	};
+ 
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -131,6 +143,24 @@ &gmac0_rgmii_clk
+ 	rx_delay = <0x2d>;
+ };
+ 
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
+ &i2c0 {
+ 	status = "okay";
+ 
+@@ -517,3 +547,20 @@ &tsadc {
+ &uart2 {
+ 	status = "okay";
+ };
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0006-arm64-dts-rockchip-Enable-HDMI-audio-on-ODROID-M1.patch

@@ -0,0 +1,48 @@
+From ded87dc761951205b8b9ba8ee4081e28a850a3db Mon Sep 17 00:00:00 2001
+Message-ID: <ded87dc761951205b8b9ba8ee4081e28a850a3db.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:40 +0200
+Subject: [PATCH] arm64: dts: rockchip: Enable HDMI audio on ODROID-M1.
+
+This enables the i2s0 controller and the hdmi-sound node on the
+ODROID-M1.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-8-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 126b893048fe..ac4e94d18feb 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -161,6 +161,10 @@ hdmi_out_con: endpoint {
+ 	};
+ };
+ 
++&hdmi_sound {
++	status = "okay";
++};
++
+ &i2c0 {
+ 	status = "okay";
+ 
+@@ -400,6 +404,10 @@ regulator-state-mem {
+ 	};
+ };
+ 
++&i2s0_8ch {
++	status = "okay";
++};
++
+ &i2s1_8ch {
+ 	rockchip,trcm-sync-tx-only;
+ 	status = "okay";
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0007-arm64-dts-rockchip-Enable-the-GPU-on-ODROID-M1.patch

@@ -0,0 +1,37 @@
+From 13438a717627cae086cc3a1126552cffa2f4bd16 Mon Sep 17 00:00:00 2001
+Message-ID: <13438a717627cae086cc3a1126552cffa2f4bd16.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:41 +0200
+Subject: [PATCH] arm64: dts: rockchip: Enable the GPU on ODROID-M1
+
+Enable the GPU core on the Rockchip RK3568 ODROID-M1.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-9-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index ac4e94d18feb..e4b7699d3eea 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -143,6 +143,11 @@ &gmac0_rgmii_clk
+ 	rx_delay = <0x2d>;
+ };
+ 
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
+ &hdmi {
+ 	avdd-0v9-supply = <&vdda0v9_image>;
+ 	avdd-1v8-supply = <&vcca1v8_image>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0008-arm64-dts-rockchip-Enable-the-USB-2.0-ports-on-ODROI.patch

@@ -0,0 +1,111 @@
+From 0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c Mon Sep 17 00:00:00 2001
+Message-ID: <0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:42 +0200
+Subject: [PATCH] arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1
+
+The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
+providing one host-only port and one OTG port. On the ODROID-M1, they
+are both used in host mode. The USB ports are powered by a DC/DC
+converter providing 5V and named VCC5V0_SYS on the schematics, followed
+by a power switch.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 61 +++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index e4b7699d3eea..2e4cc20bd676 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -105,6 +105,28 @@ vcc3v3_sys: vcc3v3-sys-regulator {
+ 		regulator-max-microvolt = <3300000>;
+ 		vin-supply = <&dc_12v>;
+ 	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb_host";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
+ };
+ 
+ &cpu0 {
+@@ -463,6 +485,15 @@ hp_det_pin: hp-det-pin {
+ 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+ 	};
++
++	usb {
++		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
+ };
+ 
+ &pmu_io_domains {
+@@ -561,6 +592,36 @@ &uart2 {
+ 	status = "okay";
+ };
+ 
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
+ &vop {
+ 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0009-arm64-dts-rockchip-Enable-the-USB-3.0-ports-on-ODROI.patch

@@ -0,0 +1,114 @@
+From d8abc451c669a8fd36b31db5cb96ec49da819124 Mon Sep 17 00:00:00 2001
+Message-ID: <d8abc451c669a8fd36b31db5cb96ec49da819124.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:43 +0200
+Subject: [PATCH] arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1
+
+The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals
+are connected to a PHY providing one host-only port and one OTG port.
+The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY.
+
+The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals
+connected to the two combo PHYs. For the USB 2.0 signals, one connector
+is connected to the host-only PHY and uses the same power switch as the
+USB 2.0 ports. The other connector has its own power switch and is
+connected to the OTG PHY, which is also connected to a device only
+micro-USB connector. The purpose of this micro-USB connector is for
+firmware update using the Rockusb vendor specific USB class. Therefore
+it does not make sense to enable this port on Linux, and the PHY is
+forced to host mode.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-11-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 49 ++++++++++++++++++-
+ 1 file changed, 48 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 2e4cc20bd676..9a84a7e76d7a 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -127,6 +127,30 @@ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+ 		regulator-max-microvolt = <5000000>;
+ 		vin-supply = <&vcc5v0_sys>;
+ 	};
++
++	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb_otg";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++};
++
++&combphy0 {
++	/* Used for USB3 */
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&combphy1 {
++	/* Used for USB3 */
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
+ };
+ 
+ &cpu0 {
+@@ -490,7 +514,7 @@ usb {
+ 		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+ 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+-		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
++		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
+ 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+ 	};
+@@ -600,6 +624,11 @@ &usb_host0_ohci {
+ 	status = "okay";
+ };
+ 
++&usb_host0_xhci {
++	dr_mode = "host";
++	status = "okay";
++};
++
+ &usb_host1_ehci {
+ 	status = "okay";
+ };
+@@ -608,6 +637,24 @@ &usb_host1_ohci {
+ 	status = "okay";
+ };
+ 
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
++};
++
+ &usb2phy1 {
+ 	status = "okay";
+ };
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0010-arm64-dts-rockchip-Add-SATA-support-to-ODROID-M1.patch

@@ -0,0 +1,48 @@
+From 2f6d4521403932ca22cb4dabef9033f1d52232ba Mon Sep 17 00:00:00 2001
+Message-ID: <2f6d4521403932ca22cb4dabef9033f1d52232ba.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:44 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add SATA support to ODROID-M1
+
+Enable the Combo PHY and SATA nodes in ODROID-M1.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-12-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 9a84a7e76d7a..bd24ccf94e76 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -153,6 +153,11 @@ &combphy1 {
+ 	status = "okay";
+ };
+ 
++&combphy2 {
++	/* used for SATA */
++	status = "okay";
++};
++
+ &cpu0 {
+ 	cpu-supply = <&vdd_cpu>;
+ };
+@@ -538,6 +543,10 @@ &saradc {
+ 	status = "okay";
+ };
+ 
++&sata2 {
++	status = "okay";
++};
++
+ &sdhci {
+ 	bus-width = <8>;
+ 	max-frequency = <200000000>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0011-arm64-dts-rockchip-Add-PCIEe-v3-nodes-to-ODROID-M1.patch

@@ -0,0 +1,80 @@
+From 1572a9c5d9fa9f654fbc1909528ae5940ad34aa3 Mon Sep 17 00:00:00 2001
+Message-ID: <1572a9c5d9fa9f654fbc1909528ae5940ad34aa3.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:45 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1
+
+Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-13-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 34 +++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index bd24ccf94e76..2f685c606bb9 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -96,6 +96,19 @@ simple-audio-card,codec {
+ 		};
+ 	};
+ 
++	vcc3v3_pcie: vcc3v3-pcie-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_pcie";
++		enable-active-high;
++		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <5000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
+ 	vcc3v3_sys: vcc3v3-sys-regulator {
+ 		compatible = "regulator-fixed";
+ 		regulator-name = "vcc3v3_sys";
+@@ -479,6 +492,18 @@ rgmii_phy0: ethernet-phy@0 {
+ 	};
+ };
+ 
++&pcie30phy {
++	status = "okay";
++};
++
++&pcie3x2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie_reset_pin>;
++	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
+ &pinctrl {
+ 	fspi {
+ 		fspi_dual_io_pins: fspi-dual-io-pins {
+@@ -503,6 +528,15 @@ led_work_pin: led-work-pin {
+ 		};
+ 	};
+ 
++	pcie {
++		pcie_reset_pin: pcie-reset-pin {
++			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
++			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
+ 	pmic {
+ 		pmic_int_l: pmic-int-l {
+ 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0012-arm64-dts-rockchip-Add-IR-receiver-node-to-ODROID-M1.patch

@@ -0,0 +1,54 @@
+From b2eae73eeb32dd9383571de6af18fc8bd39aac3a Mon Sep 17 00:00:00 2001
+Message-ID: <b2eae73eeb32dd9383571de6af18fc8bd39aac3a.1688490481.git.stefan@agner.ch>
+In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
+From: Aurelien Jarno <aurelien@aurel32.net>
+Date: Fri, 30 Sep 2022 07:12:46 +0200
+Subject: [PATCH] arm64: dts: rockchip: Add IR receiver node to ODROID-M1
+
+Add the infrared receiver and its associated pinctrl entry. Note that
+there is an external pullup to VCC3V3_SYS.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+Tested-by: Dan Johansen <strit@manjaro.org>
+Link: https://lore.kernel.org/r/20220930051246.391614-14-aurelien@aurel32.net
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 2f685c606bb9..59ecf868dbd0 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -49,6 +49,13 @@ hdmi_con_in: endpoint {
+ 		};
+ 	};
+ 
++	ir-receiver {
++		compatible = "gpio-ir-receiver";
++		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&ir_receiver_pin>;
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -519,6 +526,13 @@ fspi_dual_io_pins: fspi-dual-io-pins {
+ 		};
+ 	};
+ 
++	ir-receiver {
++		ir_receiver_pin: ir-receiver-pin {
++			/* external pullup to VCC3V3_SYS */
++			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
+ 	leds {
+ 		led_power_pin: led-power-pin {
+ 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0001-ata-dwc_ahci-Fix-support-for-other-platforms.patch

@@ -0,0 +1,48 @@
+From acadbae38f91965f204d6a5d49eb8b578970b818 Mon Sep 17 00:00:00 2001
+Message-ID: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Sun, 2 Jul 2023 20:47:17 +0000
+Subject: [PATCH] ata: dwc_ahci: Fix support for other platforms
+
+The dwc_ahci driver use platform specific defines, place the platform
+specific code behind a ifdef CONFIG_ARCH_OMAP2PLUS to allow build and
+use of the driver on Rockchip platform.
+
+Fixes: 02a4b4297901 ("drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device")
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+---
+ drivers/ata/dwc_ahci.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
+index 826fea71cc..1dc91e7fce 100644
+--- a/drivers/ata/dwc_ahci.c
++++ b/drivers/ata/dwc_ahci.c
+@@ -13,7 +13,9 @@
+ #include <ahci.h>
+ #include <scsi.h>
+ #include <sata.h>
++#ifdef CONFIG_ARCH_OMAP2PLUS
+ #include <asm/arch/sata.h>
++#endif
+ #include <asm/io.h>
+ #include <generic-phy.h>
+ 
+@@ -72,12 +74,14 @@ static int dwc_ahci_probe(struct udevice *dev)
+ 		return ret;
+ 	}
+ 
++#ifdef CONFIG_ARCH_OMAP2PLUS
+ 	if (priv->wrapper_base) {
+ 		u32 val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+ 
+ 		/* Enable SATA module, No Idle, No Standby */
+ 		writel(val, priv->wrapper_base + TI_SATA_SYSCONFIG);
+ 	}
++#endif
+ 
+ 	return ahci_probe_scsi(dev, (ulong)priv->base);
+ }
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0002-board-rockchip-Add-Hardkernel-ODROID-M1.patch

@@ -0,0 +1,990 @@
+From e52e7ff196b942c8bf8bee9e74d4f24619934a1b Mon Sep 17 00:00:00 2001
+Message-ID: <e52e7ff196b942c8bf8bee9e74d4f24619934a1b.1689147150.git.stefan@agner.ch>
+In-Reply-To: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
+References: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Sun, 2 Jul 2023 20:47:19 +0000
+Subject: [PATCH] board: rockchip: Add Hardkernel ODROID-M1
+
+Hardkernel ODROID-M1 is a single board computer with a RK3568B2 SoC,
+a slightly modified version of the RK3568 SoC.
+
+Features tested on a ODROID-M1 8GB v1.0 2022-06-13:
+- SD-card boot
+- eMMC boot
+- SPI Flash boot
+- PCIe/NVMe/AHCI
+- SATA port
+- USB host
+
+Device tree is imported from linux v6.4.
+
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+---
+ arch/arm/dts/Makefile                     |   1 +
+ arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi |  46 ++
+ arch/arm/dts/rk3568-odroid-m1.dts         | 744 ++++++++++++++++++++++
+ board/rockchip/evb_rk3568/MAINTAINERS     |   7 +
+ configs/odroid-m1-rk3568_defconfig        | 103 +++
+ doc/board/rockchip/rockchip.rst           |   1 +
+ 6 files changed, 902 insertions(+)
+ create mode 100644 arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
+ create mode 100644 arch/arm/dts/rk3568-odroid-m1.dts
+ create mode 100644 configs/odroid-m1-rk3568_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 480269fa60..334c1bafda 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -169,6 +169,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
+ 	rk3566-anbernic-rgxx3.dtb \
+ 	rk3566-radxa-cm3-io.dtb \
+ 	rk3568-evb.dtb \
++	rk3568-odroid-m1.dtb \
+ 	rk3568-rock-3a.dtb
+ 
+ dtb-$(CONFIG_ROCKCHIP_RK3588) += \
+diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
+new file mode 100644
+index 0000000000..dc8ad98715
+--- /dev/null
++++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
+@@ -0,0 +1,46 @@
++// SPDX-License-Identifier: GPL-2.0+
++
++#include "rk356x-u-boot.dtsi"
++
++/ {
++	aliases {
++		spi0 = &sfc;
++	};
++
++	chosen {
++		stdout-path = &uart2;
++	};
++};
++
++&fspi_dual_io_pins {
++	bootph-all;
++};
++
++&sdhci {
++	cap-mmc-highspeed;
++	mmc-ddr-1_8v;
++	mmc-hs200-1_8v;
++	mmc-hs400-1_8v;
++	mmc-hs400-enhanced-strobe;
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++};
++
++&sfc {
++	bootph-pre-ram;
++	u-boot,spl-sfc-no-dma;
++
++	flash@0 {
++		bootph-pre-ram;
++	};
++};
++
++&uart2 {
++	bootph-all;
++	clock-frequency = <24000000>;
++	status = "okay";
++};
++
++&vcc5v0_usb_host {
++	/* Workaround until regulator implement basic reference counter */
++	regulator-always-on;
++};
+diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
+new file mode 100644
+index 0000000000..59ecf868db
+--- /dev/null
++++ b/arch/arm/dts/rk3568-odroid-m1.dts
+@@ -0,0 +1,744 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Hardkernel Co., Ltd.
++ *
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++	model = "Hardkernel ODROID-M1";
++	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
++
++	aliases {
++		ethernet0 = &gmac0;
++		i2c0 = &i2c3;
++		i2c3 = &i2c0;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc0;
++		serial0 = &uart1;
++		serial1 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	dc_12v: dc-12v-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "dc_12v";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <12000000>;
++		regulator-max-microvolt = <12000000>;
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	ir-receiver {
++		compatible = "gpio-ir-receiver";
++		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&ir_receiver_pin>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_power: led-0 {
++			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_POWER;
++			color = <LED_COLOR_ID_RED>;
++			default-state = "keep";
++			linux,default-trigger = "default-on";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_power_pin>;
++		};
++		led_work: led-1 {
++			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_HEARTBEAT;
++			color = <LED_COLOR_ID_BLUE>;
++			linux,default-trigger = "heartbeat";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_work_pin>;
++		};
++	};
++
++	rk809-sound {
++		compatible = "simple-audio-card";
++		pinctrl-names = "default";
++		pinctrl-0 = <&hp_det_pin>;
++		simple-audio-card,name = "Analog RK817";
++		simple-audio-card,format = "i2s";
++		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
++		simple-audio-card,mclk-fs = <256>;
++		simple-audio-card,widgets =
++			"Headphone", "Headphones",
++			"Speaker", "Speaker";
++		simple-audio-card,routing =
++			"Headphones", "HPOL",
++			"Headphones", "HPOR",
++			"Speaker", "SPKO";
++
++		simple-audio-card,cpu {
++			sound-dai = <&i2s1_8ch>;
++		};
++
++		simple-audio-card,codec {
++			sound-dai = <&rk809>;
++		};
++	};
++
++	vcc3v3_pcie: vcc3v3-pcie-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_pcie";
++		enable-active-high;
++		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <5000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb_host";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb_otg";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++};
++
++&combphy0 {
++	/* Used for USB3 */
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&combphy1 {
++	/* Used for USB3 */
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
++};
++
++&combphy2 {
++	/* used for SATA */
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "output";
++	phy-handle = <&rgmii_phy0>;
++	phy-mode = "rgmii";
++	phy-supply = <&vcc3v3_sys>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac0_miim
++		     &gmac0_tx_bus2
++		     &gmac0_rx_bus2
++		     &gmac0_rgmii_clk
++		     &gmac0_rgmii_bus>;
++	status = "okay";
++
++	tx_delay = <0x4f>;
++	rx_delay = <0x2d>;
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc3v3_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
++		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
++		#clock-cells = <1>;
++		clock-names = "mclk";
++		clocks = <&cru I2S1_MCLKOUT_TX>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
++		rockchip,system-power-controller;
++		#sound-dai-cells = <0>;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-always-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-always-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&i2s0_8ch {
++	status = "okay";
++};
++
++&i2s1_8ch {
++	rockchip,trcm-sync-tx-only;
++	status = "okay";
++};
++
++&mdio0 {
++	rgmii_phy0: ethernet-phy@0 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x0>;
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&pcie30phy {
++	status = "okay";
++};
++
++&pcie3x2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie_reset_pin>;
++	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
++&pinctrl {
++	fspi {
++		fspi_dual_io_pins: fspi-dual-io-pins {
++			rockchip,pins =
++				/* fspi_clk */
++				<1 RK_PD0 1 &pcfg_pull_none>,
++				/* fspi_cs0n */
++				<1 RK_PD3 1 &pcfg_pull_none>,
++				/* fspi_d0 */
++				<1 RK_PD1 1 &pcfg_pull_none>,
++				/* fspi_d1 */
++				<1 RK_PD2 1 &pcfg_pull_none>;
++		};
++	};
++
++	ir-receiver {
++		ir_receiver_pin: ir-receiver-pin {
++			/* external pullup to VCC3V3_SYS */
++			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	leds {
++		led_power_pin: led-power-pin {
++			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		led_work_pin: led-work-pin {
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pcie {
++		pcie_reset_pin: pcie-reset-pin {
++			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
++			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	rk809 {
++		hp_det_pin: hp-det-pin {
++			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_3v3>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sata2 {
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
++	disable-wp;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	sd-uhs-sdr50;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&sfc {
++	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
++	pinctrl-0 = <&fspi_dual_io_pins>;
++	pinctrl-names = "default";
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <100000000>;
++		spi-rx-bus-width = <2>;
++		spi-tx-bus-width = <1>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "SPL";
++				reg = <0x0 0xe0000>;
++			};
++			partition@e0000 {
++				label = "U-Boot Env";
++				reg = <0xe0000 0x20000>;
++			};
++			partition@100000 {
++				label = "U-Boot";
++				reg = <0x100000 0x200000>;
++			};
++			partition@300000 {
++				label = "splash";
++				reg = <0x300000 0x100000>;
++			};
++			partition@400000 {
++				label = "Filesystem";
++				reg = <0x400000 0xc00000>;
++			};
++		};
++	};
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};
+diff --git a/board/rockchip/evb_rk3568/MAINTAINERS b/board/rockchip/evb_rk3568/MAINTAINERS
+index 6b2e7c7575..a5b59da0f7 100644
+--- a/board/rockchip/evb_rk3568/MAINTAINERS
++++ b/board/rockchip/evb_rk3568/MAINTAINERS
+@@ -7,6 +7,13 @@ F:      configs/evb-rk3568_defconfig
+ F:	arch/arm/dts/rk3568-evb-boot.dtsi
+ F:	arch/arm/dts/rk3568-evb.dts
+ 
++ODROID-M1
++M:	Jonas Karlman <jonas@kwiboo.se>
++S:	Maintained
++F:	configs/odroid-m1-rk3568_defconfig
++F:	arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
++F:	arch/arm/dts/rk3568-odroid-m1.dts
++
+ RADXA-CM3
+ M:	Jagan Teki <jagan@amarulasolutions.com>
+ S:	Maintained
+diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
+new file mode 100644
+index 0000000000..d090196219
+--- /dev/null
++++ b/configs/odroid-m1-rk3568_defconfig
+@@ -0,0 +1,103 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_TEXT_BASE=0x00a00000
++CONFIG_SPL_LIBCOMMON_SUPPORT=y
++CONFIG_SPL_LIBGENERIC_SUPPORT=y
++CONFIG_NR_DRAM_BANKS=2
++CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
++CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
++CONFIG_SF_DEFAULT_SPEED=24000000
++CONFIG_SF_DEFAULT_MODE=0x1000
++CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
++CONFIG_ROCKCHIP_RK3568=y
++CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
++CONFIG_ROCKCHIP_SPI_IMAGE=y
++CONFIG_SPL_SERIAL=y
++CONFIG_SPL_STACK_R_ADDR=0x600000
++CONFIG_SPL_STACK=0x400000
++CONFIG_DEBUG_UART_BASE=0xFE660000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_SPL_SPI=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_FIT_SIGNATURE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_LEGACY_IMAGE_FORMAT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++CONFIG_SPL_MAX_SIZE=0x40000
++CONFIG_SPL_PAD_TO=0x7f8000
++CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
++CONFIG_SPL_BSS_START_ADDR=0x4000000
++CONFIG_SPL_BSS_MAX_SIZE=0x4000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_SPI_LOAD=y
++CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
++CONFIG_SPL_ATF=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_PMIC=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_OF_LIVE=y
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_SPL_REGMAP=y
++CONFIG_SPL_SYSCON=y
++CONFIG_AHCI_PCI=y
++CONFIG_DWC_AHCI=y
++CONFIG_SPL_CLK=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MISC=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_GMAC_ROCKCHIP=y
++CONFIG_NVME_PCI=y
++CONFIG_PCIE_DW_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_SPL_RAM=y
++CONFIG_SCSI=y
++CONFIG_DM_SCSI=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_ROCKCHIP_SFC=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_ERRNO_STR=y
+diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
+index 99376fb54c..b3de15b36a 100644
+--- a/doc/board/rockchip/rockchip.rst
++++ b/doc/board/rockchip/rockchip.rst
+@@ -95,6 +95,7 @@ List of mainline supported Rockchip boards:
+ 
+ * rk3568
+      - Rockchip Evb-RK3568 (evb-rk3568)
++     - Hardkernel ODROID-M1 (odroid-m1-rk3568)
+ 
+ * rk3588
+      - Rockchip EVB (evb-rk3588)
+-- 
+2.41.0
+

buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush

@@ -0,0 +1,98 @@
+part start mmc ${devnum} hassos-bootstate mmc_env
+mmc dev ${devnum}
+
+setenv loadbootstate " \
+    echo 'loading env...'; \
+    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
+    env import -c ${ramdisk_addr_r} 0x8000;"
+
+setenv storebootstate " \
+    echo 'storing env...'; \
+    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
+    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
+
+run loadbootstate
+test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
+test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
+test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
+
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
+# HassOS bootargs
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+
+# HassOS system A/B
+setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
+
+part number mmc ${devnum} hassos-boot boot_partnum
+
+# Load environment from haos-config.txt
+if test -e mmc ${devnum}:${boot_partnum} haos-config.txt; then
+  fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
+  env import -t ${ramdisk_addr_r} ${filesize}
+fi
+
+# Load extraargs
+fileenv mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
+
+# Load device tree
+setenv fdtfile rk3568-odroid-m1.dtb
+echo "Loading standard device tree ${fdtfile}"
+fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
+fdt addr ${fdt_addr_r}
+
+# load dt overlays
+fdt resize 65536
+for overlay_file in ${overlays}; do
+  if fatload mmc ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
+    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
+    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
+  fi
+done
+if test "${overlay_error}" = "true"; then
+  echo "Error applying DT overlays, restoring original DT"
+  fatload mmc ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
+fi
+
+setenv bootargs
+for BOOT_SLOT in "${BOOT_ORDER}"; do
+  if test "x${bootargs}" != "x"; then
+    # skip remaining slots
+  elif test "x${BOOT_SLOT}" = "xA"; then
+    if test ${BOOT_A_LEFT} -gt 0; then
+      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
+      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
+      part number mmc ${devnum} hassos-kernel0 kernel_partnum
+      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
+          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
+      fi
+    fi
+  elif test "x${BOOT_SLOT}" = "xB"; then
+    if test ${BOOT_B_LEFT} -gt 0; then
+      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
+      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
+      part number mmc ${devnum} hassos-kernel1 kernel_partnum
+      if load mmc ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
+          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
+      fi
+    fi
+  fi
+done
+
+if test -n "${bootargs}"; then
+  run storebootstate
+else
+  echo "No valid slot found, resetting tries to 3"
+  setenv BOOT_A_LEFT 3
+  setenv BOOT_B_LEFT 3
+  run storebootstate
+  reset
+fi
+
+echo "Starting kernel"
+booti ${kernel_addr_r} - ${fdt_addr_r}
+
+echo "Boot failed, resetting..."
+reset

buildroot-external/board/hardkernel/odroid-m1/uboot.config

@@ -0,0 +1,5 @@
+CONFIG_DOS_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

buildroot-external/board/hardkernel/odroid-n2/meta

@@ -1,10 +1,12 @@
 BOARD_ID=odroid-n2
-BOARD_NAME="Hardkernel Odroid-N2"
+BOARD_NAME="Hardkernel ODROID-N2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-n2
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -18,8 +18,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/odroid-xu4/kernel.config

@@ -0,0 +1 @@
+# CONFIG_S3C2410_WATCHDOG is not set

buildroot-external/board/hardkernel/odroid-xu4/meta

@@ -1,10 +1,12 @@
 BOARD_ID=odroid-xu4
-BOARD_NAME="Hardkernel Odroid-XU4"
+BOARD_NAME="Hardkernel ODROID-XU4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
 BOOT_SYS=mbr
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x4000
 SUPERVISOR_MACHINE=odroid-xu
 SUPERVISOR_ARCH=armv7

buildroot-external/board/hardkernel/odroid-xu4/patches/linux/0001-ODROID-XU4-regulator-s2mps11-add-ethernet-power-rese.patch

@@ -1,5 +1,5 @@
-From 1fb890d987088f5b6b4c165d8d05480e15b8882e Mon Sep 17 00:00:00 2001
-Message-Id: <1fb890d987088f5b6b4c165d8d05480e15b8882e.1662147854.git.stefan@agner.ch>
+From e7d59e0444170873e945a0675ed1565a65c99e17 Mon Sep 17 00:00:00 2001
+Message-Id: <e7d59e0444170873e945a0675ed1565a65c99e17.1676489173.git.stefan@agner.ch>
 From: memeka <mihailescu2m@gmail.com>
 Date: Fri, 18 Jan 2019 14:36:21 +1030
 Subject: [PATCH] ODROID-XU4: regulator: s2mps11: add ethernet power reset in
@@ -90,5 +90,5 @@ index ebc67e3ddd4f..51f128076db9 100644
  	kfree(rdata);
  
 -- 
-2.37.2
+2.39.1
 

buildroot-external/board/hardkernel/odroid-xu4/patches/uboot/0001-samsung-common-ignore-if-CROS-EC-is-not-supported.patch

@@ -0,0 +1,30 @@
+From 24252c65cfea76c5724044381bafb587a9fecd6a Mon Sep 17 00:00:00 2001
+Message-Id: <24252c65cfea76c5724044381bafb587a9fecd6a.1676446297.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 15 Feb 2023 08:30:41 +0100
+Subject: [PATCH] samsung: common: ignore if CROS EC is not supported
+
+If the CROS device class is not compiled in, uclass returns not
+supported. Ignore this case as well.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ board/samsung/common/board.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
+index 16ce5cb892..663d7ca991 100644
+--- a/board/samsung/common/board.c
++++ b/board/samsung/common/board.c
+@@ -223,7 +223,7 @@ int board_late_init(void)
+ 	char mmcbootdev_str[16];
+ 
+ 	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
+-	if (ret && ret != -ENODEV) {
++	if (ret && ret != -ENODEV && ret != -EPFNOSUPPORT) {
+ 		/* Force console on */
+ 		gd->flags &= ~GD_FLG_SILENT;
+ 
+-- 
+2.39.1
+

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -20,8 +20,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/hardkernel/patches/linux/0001-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,8 +1,8 @@
-From 9f8390a715bc58e7423b65a18c4499761c84b819 Mon Sep 17 00:00:00 2001
-Message-Id: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 86f6a398d2c080f92d51048ededf45efbe3a96d4 Mon Sep 17 00:00:00 2001
+Message-Id: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH 1/7] arm64: dts: meson: g12b: add power button support
+Subject: [PATCH] arm64: dts: meson: g12b: add power button support
 
 Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
 GPIO is low active, e.g. when connecting with pin 9 (GND) a power
@@ -14,7 +14,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index d33e54b5e196..5f0f036b1265 100644
+index fd3fa82e4c33..06bdba57b04c 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -36,5 +36,5 @@ index d33e54b5e196..5f0f036b1265 100644
  		compatible = "gpio-leds";
  
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0002-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,10 +1,10 @@
-From 26917e25696e7156a85d4dfcc578cb4cf4f42dde Mon Sep 17 00:00:00 2001
-Message-Id: <26917e25696e7156a85d4dfcc578cb4cf4f42dde.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From e269c47ef68371dbed1ff5919a67fcc385d8c6da Mon Sep 17 00:00:00 2001
+Message-Id: <e269c47ef68371dbed1ff5919a67fcc385d8c6da.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH 2/7] arm64: dts: meson: g12b: add GPIO fan support
+Subject: [PATCH] arm64: dts: meson: g12b: add GPIO fan support
 
 Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
 pad used to control the fan does not support real PWM, hence the RPM
@@ -16,7 +16,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 5f0f036b1265..36dbd2666015 100644
+index 06bdba57b04c..bcf6d8eacd6e 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
@@ -38,5 +38,5 @@ index 5f0f036b1265..36dbd2666015 100644
  		compatible = "gpio-keys-polled";
  		poll-interval = <100>;
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0003-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,11 +1,10 @@
-From 5b2b8c960269eba18f0557bf49990b9c28e5e6af Mon Sep 17 00:00:00 2001
-Message-Id: <5b2b8c960269eba18f0557bf49990b9c28e5e6af.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 8c3e65cf09d62797a2fe50234f30f33f6e4eda44 Mon Sep 17 00:00:00 2001
+Message-Id: <8c3e65cf09d62797a2fe50234f30f33f6e4eda44.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH 3/7] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
- device
+Subject: [PATCH] arm64: dts: meson: g12b: odroid-n2: add fan as cooling device
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -21,10 +20,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 38 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 36dbd2666015..5ca75696bd5c 100644
+index bcf6d8eacd6e..6dcf990e0efc 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -388,6 +388,44 @@ &clkc_audio {
+@@ -390,6 +390,44 @@ &clkc_audio {
  	status = "okay";
  };
  
@@ -70,5 +69,5 @@ index 36dbd2666015..5ca75696bd5c 100644
  	cpu-supply = <&vddcpu_b>;
  	operating-points-v2 = <&cpu_opp_table_0>;
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-add-uart_A-node.patch

@@ -1,10 +1,10 @@
-From fee88e0053de7878977913311bdb153494aa6c61 Mon Sep 17 00:00:00 2001
-Message-Id: <fee88e0053de7878977913311bdb153494aa6c61.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 433c5a06b1195e2e689f8d260ec471caca2fa1b6 Mon Sep 17 00:00:00 2001
+Message-Id: <433c5a06b1195e2e689f8d260ec471caca2fa1b6.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH 4/7] arm64: dts: meson: add uart_A node
+Subject: [PATCH] arm64: dts: meson: add uart_A node
 
 The UART_A is available through J3 pin 8/10 and documented to be
 available as UART by default.
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 5ca75696bd5c..738eb0339333 100644
+index 6dcf990e0efc..7eaaced7893b 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -12,6 +12,7 @@
@@ -26,7 +26,7 @@ index 5ca75696bd5c..738eb0339333 100644
  		ethernet0 = &ethmac;
  		rtc0 = &rtc;
  		rtc1 = &vrtc;
-@@ -728,6 +729,12 @@ &toddr_c {
+@@ -730,6 +731,12 @@ &toddr_c {
  	status = "okay";
  };
  
@@ -40,5 +40,5 @@ index 5ca75696bd5c..738eb0339333 100644
  	status = "okay";
  	pinctrl-0 = <&uart_ao_a_pins>;
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,10 +1,10 @@
-From 51ded393003a60d3932081114bff142c4c69b293 Mon Sep 17 00:00:00 2001
-Message-Id: <51ded393003a60d3932081114bff142c4c69b293.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From 00129576fb656015b66958f4d7370ee7e2d990e2 Mon Sep 17 00:00:00 2001
+Message-Id: <00129576fb656015b66958f4d7370ee7e2d990e2.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH 5/7] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+Subject: [PATCH] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
 
 The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
 are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
@@ -16,10 +16,10 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 6 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 738eb0339333..2e9fefc20b19 100644
+index 7eaaced7893b..8d183253389c 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -586,6 +586,12 @@ &ir {
+@@ -588,6 +588,12 @@ &ir {
  	linux,rc-map-name = "rc-odroid";
  };
  
@@ -33,5 +33,5 @@ index 738eb0339333..2e9fefc20b19 100644
  	status = "okay";
  	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0006-ODROID-C4-arm64-dts-add-uart_A-node.patch

@@ -1,17 +1,17 @@
-From 0ad900b2d6e895b1f1788d51e471863743727d71 Mon Sep 17 00:00:00 2001
-Message-Id: <0ad900b2d6e895b1f1788d51e471863743727d71.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From d6b1ddfb5816b887470452920d273661e361632d Mon Sep 17 00:00:00 2001
+Message-Id: <d6b1ddfb5816b887470452920d273661e361632d.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Tue, 1 Mar 2022 21:51:50 +0100
-Subject: [PATCH 6/7] ODROID-C4: arm64/dts: add uart_A node
+Subject: [PATCH] ODROID-C4: arm64/dts: add uart_A node
 
 ---
  arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index 76ad052fbf0c..690e4823a9d0 100644
+index ddb1b345397f..49b88c1e11cd 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 @@ -10,8 +10,9 @@
@@ -25,7 +25,7 @@ index 76ad052fbf0c..690e4823a9d0 100644
  	};
  
  	chosen {
-@@ -436,6 +437,12 @@ &tohdmitx {
+@@ -450,6 +451,12 @@ &tohdmitx {
  	status = "okay";
  };
  
@@ -39,5 +39,5 @@ index 76ad052fbf0c..690e4823a9d0 100644
  	status = "okay";
  	pinctrl-0 = <&uart_ao_a_pins>;
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0007-ODROID-C4-arm64-dts-add-i2c2-i2c3-node.patch

@@ -1,17 +1,17 @@
-From 105003d49a505e0f0e033a6f3d945f745912c7b1 Mon Sep 17 00:00:00 2001
-Message-Id: <105003d49a505e0f0e033a6f3d945f745912c7b1.1646168061.git.stefan@agner.ch>
-In-Reply-To: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
-References: <9f8390a715bc58e7423b65a18c4499761c84b819.1646168061.git.stefan@agner.ch>
+From a78a968b4a51a32f44c170c591a46b27326b97f2 Mon Sep 17 00:00:00 2001
+Message-Id: <a78a968b4a51a32f44c170c591a46b27326b97f2.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Tue, 1 Mar 2022 21:53:32 +0100
-Subject: [PATCH 7/7] ODROID-C4: arm64/dts: add i2c2, i2c3 node
+Subject: [PATCH] ODROID-C4: arm64/dts: add i2c2, i2c3 node
 
 ---
  .../boot/dts/amlogic/meson-sm1-odroid.dtsi    | 53 +++++++++++++++++++
  1 file changed, 53 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
-index 690e4823a9d0..85637c1c846b 100644
+index 49b88c1e11cd..b8d88310ae3a 100644
 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
 @@ -11,6 +11,8 @@
@@ -23,7 +23,7 @@ index 690e4823a9d0..85637c1c846b 100644
  		serial0 = &uart_AO;
  		serial1 = &uart_A;
  	};
-@@ -373,6 +375,57 @@ &ir {
+@@ -387,6 +389,57 @@ &ir {
  	pinctrl-names = "default";
  };
  
@@ -82,5 +82,5 @@ index 690e4823a9d0..85637c1c846b 100644
  	pinctrl-0 = <&pwm_ao_d_e_pins>;
  	pinctrl-names = "default";
 -- 
-2.35.1
+2.39.1
 

buildroot-external/board/hardkernel/patches/linux/0008-arm64-dts-amlogic-add-uartA-uartC-to-ODROID-C2.patch

@@ -0,0 +1,48 @@
+From 8263e17f170296c28d3a781d5b05e59778fe4a27 Mon Sep 17 00:00:00 2001
+Message-Id: <8263e17f170296c28d3a781d5b05e59778fe4a27.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 15 Feb 2023 20:15:07 +0100
+Subject: [PATCH] arm64: dts: amlogic: add uartA/uartC to ODROID-C2
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+index 201596247fd9..b2cb12fb46fd 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+@@ -17,6 +17,8 @@ / {
+ 
+ 	aliases {
+ 		serial0 = &uart_AO;
++		serial1 = &uart_A;
++		serial2 = &uart_C;
+ 		ethernet0 = &ethmac;
+ 	};
+ 
+@@ -399,6 +401,18 @@ &uart_AO {
+ 	pinctrl-names = "default";
+ };
+ 
++&uart_A {
++	status = "disabled";
++	pinctrl-0 = <&uart_a_pins>;
++	pinctrl-names = "default";
++};
++
++&uart_C {
++	status = "disabled";
++	pinctrl-0 = <&uart_c_pins>;
++	pinctrl-names = "default";
++};
++
+ &usb0_phy {
+ 	status = "disabled";
+ 	phy-supply = <&usb_otg_pwr>;
+-- 
+2.39.1
+

buildroot-external/board/hardkernel/patches/linux/0009-arm64-dts-amlogic-meson-gx-add-missing-pins-for-I2C-.patch

@@ -0,0 +1,38 @@
+From ceef8d62bcf0c2c7b3e96831e85a872009657cf0 Mon Sep 17 00:00:00 2001
+Message-Id: <ceef8d62bcf0c2c7b3e96831e85a872009657cf0.1676488652.git.stefan@agner.ch>
+In-Reply-To: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+References: <86f6a398d2c080f92d51048ededf45efbe3a96d4.1676488652.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 15 Feb 2023 20:16:29 +0100
+Subject: [PATCH] arm64: dts: amlogic: meson-gx: add missing pins for I2C A/B
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+index 7c029f552a23..b3c22861b022 100644
+--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
++++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+@@ -333,6 +333,8 @@ &hwrng {
+ 
+ &i2c_A {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_a_pins>;
+ };
+ 
+ &i2c_AO {
+@@ -341,6 +343,8 @@ &i2c_AO {
+ 
+ &i2c_B {
+ 	clocks = <&clkc CLKID_I2C>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c_b_pins>;
+ };
+ 
+ &i2c_C {
+-- 
+2.39.1
+

buildroot-external/board/hardkernel/patches/linux/board-odroidc2-add-uartA-uartC.patch

@@ -1,32 +0,0 @@
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-index 1cc9dc6..9f48dff 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
-@@ -16,6 +16,8 @@
- 
- 	aliases {
- 		serial0 = &uart_AO;
-+		serial1 = &uart_A;
-+		serial2 = &uart_C;
- 		ethernet0 = &ethmac;
- 	};
- 
-@@ -290,6 +355,18 @@
- 	pinctrl-names = "default";
- };
- 
-+&uart_A {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_a_pins>;
-+	pinctrl-names = "default";
-+};
-+
-+&uart_C {
-+	status = "disabled";
-+	pinctrl-0 = <&uart_c_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &usb0_phy {
- 	status = "okay";
- 	phy-supply = <&usb_otg_pwr>;

buildroot-external/board/hardkernel/patches/linux/general-meson64-i2cX-missing-pins.patch

@@ -1,22 +0,0 @@
-diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-index 98cbba6..48ca119 100644
---- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
-@@ -321,6 +322,8 @@
- 
- &i2c_A {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_a_pins>;
- };
- 
- &i2c_AO {
-@@ -329,6 +332,8 @@
- 
- &i2c_B {
- 	clocks = <&clkc CLKID_I2C>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c_b_pins>;
- };
- 
- &i2c_C {

buildroot-external/board/khadas/kernel-vim.config

@@ -13,7 +13,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
@@ -164,8 +163,6 @@ CONFIG_PCIE_DW_PLAT_HOST=y
 # CONFIG_PCI_MESON is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
@@ -472,15 +469,19 @@ CONFIG_VIDEO_EM28XX_V4L2=m
 CONFIG_VIDEO_EM28XX_ALSA=m
 CONFIG_VIDEO_EM28XX_DVB=m
 CONFIG_MEDIA_PCI_SUPPORT=y
+CONFIG_CEC_CORE=m
+CONFIG_CEC_PIN=y
+CONFIG_MEDIA_CEC_RC=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_DW_HDMI_CEC=y
-CONFIG_DRM_MESON=y
+CONFIG_DRM_DW_HDMI=m
+CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
+CONFIG_DRM_MESON=m
+CONFIG_DRM_MESON_DW_HDMI=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_EFI=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_SOUND=y

buildroot-external/board/khadas/vim3/meta

@@ -4,7 +4,9 @@ CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
 BOOT_SYS=mbr
+BOOT_SIZE=24M
 BOOT_SPL=true
+BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=khadas-vim3
 SUPERVISOR_ARCH=aarch64

buildroot-external/board/khadas/vim3/uboot-boot.ush

@@ -18,8 +18,11 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
+# Allows ConditionFirstBoot=
+test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
+
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"

buildroot-external/board/nabucasa/green/hassos-hook.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+# shellcheck disable=SC2155
+
+function hassos_pre_image() {
+    local BOOT_DATA="$(path_boot_dir)"
+    local SPL_IMG="$(path_spl_img)"
+
+    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
+    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
+
+    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
+    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
+    dd if="${BINARIES_DIR}/u-boot.itb" of="${SPL_IMG}" conv=notrunc bs=512 seek=16384
+}
+
+
+function hassos_post_image() {
+    convert_disk_image_xz
+}
+

buildroot-external/board/nabucasa/green/kernel.config

@@ -0,0 +1,14 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+
+CONFIG_THERMAL_GOV_BANG_BANG=y
+CONFIG_SENSORS_GPIO_FAN=y
+
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+
+CONFIG_MMC_SDHCI_OF_DWCMSHC=y
+
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_RK860X=y
+
+# CONFIG_DW_WATCHDOG is not set

buildroot-external/board/nabucasa/green/meta

@@ -0,0 +1,12 @@
+BOARD_ID=green
+BOARD_NAME="Home Assistant Green"
+CHASSIS=embedded
+BOOTLOADER=uboot
+KERNEL_FILE=Image
+BOOT_SYS=gpt
+BOOT_SIZE=16M
+BOOT_SPL=true
+BOOT_SPL_SIZE=16M
+BOOT_ENV_SIZE=0x8000
+SUPERVISOR_MACHINE=green
+SUPERVISOR_ARCH=aarch64

buildroot-external/board/nabucasa/green/patches/linux/0001-drivers-regulator-Supports-rk860x.patch

@@ -0,0 +1,662 @@
+From b7957b94fe2649a1e8032b10ea293b106cda4532 Mon Sep 17 00:00:00 2001
+From: Zhangqun Ming <north_sea@qq.com>
+Date: Thu, 6 Jul 2023 10:04:39 +0000
+Subject: [PATCH 1/2] drivers: regulator: Supports rk860x
+
+---
+ drivers/regulator/Kconfig            |  11 +
+ drivers/regulator/Makefile           |   1 +
+ drivers/regulator/rk860x-regulator.c | 607 +++++++++++++++++++++++++++
+ 3 files changed, 619 insertions(+)
+ create mode 100644 drivers/regulator/rk860x-regulator.c
+
+diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
+index 070e4403c..6a3c00c24 100644
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -1047,6 +1047,17 @@ config REGULATOR_RK808
+ 	  through regulator interface. The device supports multiple DCDC/LDO
+ 	  outputs which can be controlled by i2c communication.
+ 
++config REGULATOR_RK860X
++	tristate "Rockchip RK860X Regulator"
++	depends on I2C
++	select REGMAP_I2C
++	help
++	  This driver supports Rockchip RK860X Digitally Programmable
++	  Buck Regulator. The RK860X is a step-down switching voltage
++	  regulator that delivers a digitally programmable output from an
++	  input voltage supply of 2.5V to 5.5V. The output voltage is
++	  programmed through an I2C interface.
++
+ config REGULATOR_RN5T618
+ 	tristate "Ricoh RN5T567/618 voltage regulators"
+ 	depends on MFD_RN5T618
+diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
+index 5962307e1..76a156e98 100644
+--- a/drivers/regulator/Makefile
++++ b/drivers/regulator/Makefile
+@@ -125,6 +125,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+ obj-$(CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY)  += rpi-panel-attiny-regulator.o
+ obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
+ obj-$(CONFIG_REGULATOR_RK808)   += rk808-regulator.o
++obj-$(CONFIG_REGULATOR_RK860X)	+= rk860x-regulator.o
+ obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+ obj-$(CONFIG_REGULATOR_ROHM)	+= rohm-regulator.o
+ obj-$(CONFIG_REGULATOR_RT4801)	+= rt4801-regulator.o
+diff --git a/drivers/regulator/rk860x-regulator.c b/drivers/regulator/rk860x-regulator.c
+new file mode 100644
+index 000000000..4596761bd
+--- /dev/null
++++ b/drivers/regulator/rk860x-regulator.c
+@@ -0,0 +1,607 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2021 Fuzhou Rockchip Electronics Co., Ltd
++ */
++#include <linux/err.h>
++#include <linux/gpio.h>
++#include <linux/i2c.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/of_gpio.h>
++#include <linux/param.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/regulator/driver.h>
++#include <linux/regulator/machine.h>
++#include <linux/regulator/of_regulator.h>
++#include <linux/slab.h>
++
++/* Voltage setting */
++
++#define RK860X_VSEL0_A		0x00
++#define RK860X_VSEL1_A		0x01
++#define RK860X_VSEL0_B		0x06
++#define RK860X_VSEL1_B		0x07
++#define RK860X_MAX_SET		0x08
++
++/* Control register */
++#define RK860X_CONTROL		0x02
++/* IC Type */
++#define RK860X_ID1		0x03
++/* IC mask version */
++#define RK860X_ID2		0x04
++/* Monitor register */
++#define RK860X_MONITOR		0x05
++
++/* VSEL bit definitions */
++#define VSEL_BUCK_EN		BIT(7)
++#define VSEL_MODE		BIT(6)
++#define VSEL_A_NSEL_MASK	0x3F
++#define VSEL_B_NSEL_MASK	0xff
++
++/* Chip ID */
++#define DIE_ID			0x0f
++#define DIE_REV			0x0f
++/* Control bit definitions */
++#define CTL_OUTPUT_DISCHG	BIT(7)
++#define CTL_SLEW_MASK		(0x7 << 4)
++#define CTL_SLEW_SHIFT		4
++#define CTL_RESET		BIT(2)
++
++#define RK860X_NVOLTAGES_64	64
++#define RK860X_NVOLTAGES_160	160
++
++/* IC Type */
++enum {
++	RK860X_CHIP_ID_00 = 0,
++	RK860X_CHIP_ID_01,
++	RK860X_CHIP_ID_02,
++	RK860X_CHIP_ID_03,
++};
++
++struct rk860x_platform_data {
++	struct regulator_init_data *regulator;
++	unsigned int slew_rate;
++	/* Sleep VSEL ID */
++	unsigned int sleep_vsel_id;
++	int limit_volt;
++	struct gpio_desc *vsel_gpio;
++};
++
++struct rk860x_device_info {
++	struct regmap *regmap;
++	struct device *dev;
++	struct regulator_desc desc;
++	struct regulator_dev *rdev;
++	struct regulator_init_data *regulator;
++	/* IC Type and Rev */
++	int chip_id;
++	/* Voltage setting register */
++	unsigned int vol_reg;
++	unsigned int sleep_reg;
++	unsigned int en_reg;
++	unsigned int sleep_en_reg;
++	unsigned int mode_reg;
++	unsigned int vol_mask;
++	unsigned int mode_mask;
++	unsigned int slew_reg;
++	unsigned int slew_mask;
++	unsigned int slew_shift;
++	/* Voltage range and step(linear) */
++	unsigned int vsel_min;
++	unsigned int vsel_step;
++	unsigned int n_voltages;
++	/* Voltage slew rate limiting */
++	unsigned int slew_rate;
++	struct gpio_desc *vsel_gpio;
++	unsigned int sleep_vsel_id;
++};
++
++static unsigned int rk860x_map_mode(unsigned int mode)
++{
++	return mode == REGULATOR_MODE_FAST ?
++		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
++}
++
++static int rk860x_get_voltage(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++	unsigned int val;
++	int ret;
++
++	ret = regmap_read(di->regmap, RK860X_MAX_SET, &val);
++	if (ret < 0)
++		return ret;
++	ret = regulator_get_voltage_sel_regmap(rdev);
++	if (ret > val)
++		return val;
++
++	return ret;
++}
++
++static int rk860x_set_suspend_voltage(struct regulator_dev *rdev, int uV)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++	int ret;
++
++	ret = regulator_map_voltage_linear(rdev, uV, uV);
++	if (ret < 0)
++		return ret;
++	ret = regmap_update_bits(di->regmap, di->sleep_reg,
++				 di->vol_mask, ret);
++	if (ret < 0)
++		return ret;
++
++	return 0;
++}
++
++static int rk860x_set_suspend_enable(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++
++	return regmap_update_bits(di->regmap, di->sleep_en_reg,
++				  VSEL_BUCK_EN, VSEL_BUCK_EN);
++}
++
++static int rk860x_set_suspend_disable(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++
++	return regmap_update_bits(di->regmap, di->sleep_en_reg,
++				  VSEL_BUCK_EN, 0);
++}
++
++static int rk860x_resume(struct regulator_dev *rdev)
++{
++	int ret;
++
++	if (!rdev->constraints->state_mem.changeable)
++		return 0;
++
++	ret = rk860x_set_suspend_enable(rdev);
++	if (ret)
++		return ret;
++
++	return regulator_suspend_enable(rdev, PM_SUSPEND_MEM);
++}
++
++static int rk860x_set_enable(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++
++	if (di->vsel_gpio) {
++		gpiod_set_raw_value(di->vsel_gpio, !di->sleep_vsel_id);
++		return 0;
++	}
++
++	return regmap_update_bits(di->regmap, di->en_reg,
++				  VSEL_BUCK_EN, VSEL_BUCK_EN);
++}
++
++static int rk860x_set_disable(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++
++	if (di->vsel_gpio) {
++		gpiod_set_raw_value(di->vsel_gpio, di->sleep_vsel_id);
++		return 0;
++	}
++
++	return regmap_update_bits(di->regmap, di->en_reg,
++				  VSEL_BUCK_EN, 0);
++}
++
++static int rk860x_is_enabled(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++	unsigned int val;
++	int ret = 0;
++
++	if (di->vsel_gpio) {
++		if (di->sleep_vsel_id)
++			return !gpiod_get_raw_value(di->vsel_gpio);
++		else
++			return gpiod_get_raw_value(di->vsel_gpio);
++	}
++
++	ret = regmap_read(di->regmap, di->en_reg, &val);
++	if (ret < 0)
++		return ret;
++	if (val & VSEL_BUCK_EN)
++		return 1;
++	else
++		return 0;
++}
++
++static int rk860x_set_mode(struct regulator_dev *rdev, unsigned int mode)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++
++	switch (mode) {
++	case REGULATOR_MODE_FAST:
++		regmap_update_bits(di->regmap, di->mode_reg,
++				   di->mode_mask, di->mode_mask);
++		break;
++	case REGULATOR_MODE_NORMAL:
++		regmap_update_bits(di->regmap, di->mode_reg, di->mode_mask, 0);
++		break;
++	default:
++		return -EINVAL;
++	}
++	return 0;
++}
++
++static unsigned int rk860x_get_mode(struct regulator_dev *rdev)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++	unsigned int val;
++	int ret = 0;
++
++	ret = regmap_read(di->regmap, di->mode_reg, &val);
++	if (ret < 0)
++		return ret;
++	if (val & di->mode_mask)
++		return REGULATOR_MODE_FAST;
++	else
++		return REGULATOR_MODE_NORMAL;
++}
++
++static const int slew_rates[] = {
++	64000,
++	32000,
++	16000,
++	 8000,
++	 4000,
++	 2000,
++	 1000,
++	  500,
++};
++
++static int rk860x_set_ramp(struct regulator_dev *rdev, int ramp)
++{
++	struct rk860x_device_info *di = rdev_get_drvdata(rdev);
++	int regval = -1, i;
++	const int *slew_rate_t;
++	int slew_rate_n;
++
++	slew_rate_t = slew_rates;
++	slew_rate_n = ARRAY_SIZE(slew_rates);
++
++	for (i = 0; i < slew_rate_n; i++) {
++		if (ramp <= slew_rate_t[i])
++			regval = i;
++		else
++			break;
++	}
++
++	if (regval < 0) {
++		dev_err(di->dev, "unsupported ramp value %d\n", ramp);
++		return -EINVAL;
++	}
++
++	return regmap_update_bits(di->regmap, di->slew_reg,
++				  di->slew_mask, regval << di->slew_shift);
++}
++
++static const struct regulator_ops rk860x_regulator_ops = {
++	.set_voltage_sel = regulator_set_voltage_sel_regmap,
++	.get_voltage_sel = rk860x_get_voltage,
++	.set_voltage_time_sel = regulator_set_voltage_time_sel,
++	.map_voltage = regulator_map_voltage_linear,
++	.list_voltage = regulator_list_voltage_linear,
++	.set_suspend_voltage = rk860x_set_suspend_voltage,
++	.enable = rk860x_set_enable,
++	.disable = rk860x_set_disable,
++	.is_enabled = rk860x_is_enabled,
++	.set_mode = rk860x_set_mode,
++	.get_mode = rk860x_get_mode,
++	.set_ramp_delay = rk860x_set_ramp,
++	.set_suspend_enable = rk860x_set_suspend_enable,
++	.set_suspend_disable = rk860x_set_suspend_disable,
++	.resume = rk860x_resume,
++};
++
++/* For 00,01 options:
++ * VOUT = 0.7125V + NSELx * 12.5mV, from 0.7125 to 1.5V.
++ * For 02,03 options:
++ * VOUT = 0.5V + NSELx * 6.25mV, from 0.5 to 1.5V.
++ */
++static int rk860x_device_setup(struct rk860x_device_info *di,
++			       struct rk860x_platform_data *pdata)
++{
++	int ret = 0;
++	u32 val = 0;
++
++	switch (di->chip_id) {
++	case RK860X_CHIP_ID_00:
++	case RK860X_CHIP_ID_01:
++		di->vsel_min = 712500;
++		di->vsel_step = 12500;
++		di->n_voltages = RK860X_NVOLTAGES_64;
++		di->vol_mask = VSEL_A_NSEL_MASK;
++		if (di->sleep_vsel_id) {
++			di->sleep_reg = RK860X_VSEL1_A;
++			di->vol_reg = RK860X_VSEL0_A;
++			di->mode_reg = RK860X_VSEL0_A;
++			di->en_reg = RK860X_VSEL0_A;
++			di->sleep_en_reg = RK860X_VSEL1_A;
++		} else {
++			di->sleep_reg = RK860X_VSEL0_A;
++			di->vol_reg = RK860X_VSEL1_A;
++			di->mode_reg = RK860X_VSEL1_A;
++			di->en_reg = RK860X_VSEL1_A;
++			di->sleep_en_reg = RK860X_VSEL0_A;
++		}
++		break;
++	case RK860X_CHIP_ID_02:
++	case RK860X_CHIP_ID_03:
++		di->vsel_min = 500000;
++		di->vsel_step = 6250;
++		di->n_voltages = RK860X_NVOLTAGES_160;
++		di->vol_mask = VSEL_B_NSEL_MASK;
++		if (di->sleep_vsel_id) {
++			di->sleep_reg = RK860X_VSEL1_B;
++			di->vol_reg = RK860X_VSEL0_B;
++			di->mode_reg = RK860X_VSEL0_A;
++			di->en_reg = RK860X_VSEL0_A;
++			di->sleep_en_reg = RK860X_VSEL1_A;
++		} else {
++			di->sleep_reg = RK860X_VSEL0_B;
++			di->vol_reg = RK860X_VSEL1_B;
++			di->mode_reg = RK860X_VSEL1_A;
++			di->en_reg = RK860X_VSEL1_A;
++			di->sleep_en_reg = RK860X_VSEL0_A;
++		}
++		break;
++	default:
++		dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id);
++		return -EINVAL;
++	}
++
++	di->mode_mask = VSEL_MODE;
++	di->slew_reg = RK860X_CONTROL;
++	di->slew_mask = CTL_SLEW_MASK;
++	di->slew_shift = CTL_SLEW_SHIFT;
++
++	if (pdata->limit_volt) {
++		if (pdata->limit_volt < di->vsel_min ||
++		    pdata->limit_volt > 1500000)
++			pdata->limit_volt = 1500000;
++		val = (pdata->limit_volt - di->vsel_min) / di->vsel_step;
++		ret = regmap_write(di->regmap, RK860X_MAX_SET, val);
++		if (ret < 0) {
++			dev_err(di->dev, "Failed to set limit voltage!\n");
++			return ret;
++		}
++	}
++
++	return ret;
++}
++
++static int rk860x_regulator_register(struct rk860x_device_info *di,
++				     struct regulator_config *config)
++{
++	struct regulator_desc *rdesc = &di->desc;
++
++	rdesc->name = "rk860x-reg";
++	rdesc->supply_name = "vin";
++	rdesc->ops = &rk860x_regulator_ops;
++	rdesc->type = REGULATOR_VOLTAGE;
++	rdesc->n_voltages = di->n_voltages;
++	rdesc->enable_reg = di->en_reg;
++	rdesc->enable_mask = VSEL_BUCK_EN;
++	rdesc->min_uV = di->vsel_min;
++	rdesc->uV_step = di->vsel_step;
++	rdesc->vsel_reg = di->vol_reg;
++	rdesc->vsel_mask = di->vol_mask;
++	rdesc->owner = THIS_MODULE;
++	rdesc->enable_time = 400;
++
++	di->rdev = devm_regulator_register(di->dev, &di->desc, config);
++	return PTR_ERR_OR_ZERO(di->rdev);
++}
++
++static const struct regmap_config rk860x_regmap_config = {
++	.reg_bits = 8,
++	.val_bits = 8,
++};
++
++static struct rk860x_platform_data *
++rk860x_parse_dt(struct device *dev, struct device_node *np,
++		const struct regulator_desc *desc)
++{
++	struct rk860x_platform_data *pdata;
++	int ret, flag, limit_volt;
++	u32 tmp;
++
++	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
++	if (!pdata)
++		return NULL;
++
++	pdata->regulator = of_get_regulator_init_data(dev, np, desc);
++	pdata->regulator->constraints.initial_state = PM_SUSPEND_MEM;
++
++	if (!(of_property_read_u32(np, "limit-microvolt", &limit_volt)))
++		pdata->limit_volt = limit_volt;
++
++	ret = of_property_read_u32(np, "rockchip,suspend-voltage-selector",
++				   &tmp);
++	if (!ret)
++		pdata->sleep_vsel_id = tmp;
++
++	if (pdata->sleep_vsel_id)
++		flag = GPIOD_OUT_LOW;
++	else
++		flag = GPIOD_OUT_HIGH;
++
++	pdata->vsel_gpio = devm_gpiod_get_index_optional(dev, "vsel", 0, flag);
++	if (IS_ERR(pdata->vsel_gpio)) {
++		ret = PTR_ERR(pdata->vsel_gpio);
++		dev_err(dev, "failed to get vesl gpio (%d)\n", ret);
++		pdata->vsel_gpio = NULL;
++	}
++
++	return pdata;
++}
++
++static const struct of_device_id rk860x_dt_ids[] = {
++	{
++		.compatible = "rockchip,rk8600",
++		.data = (void *)RK860X_CHIP_ID_00
++	},
++	{
++		.compatible = "rockchip,rk8601",
++		.data = (void *)RK860X_CHIP_ID_01
++	},
++	{
++		.compatible = "rockchip,rk8602",
++		.data = (void *)RK860X_CHIP_ID_02
++	},
++	{
++		.compatible = "rockchip,rk8603",
++		.data = (void *)RK860X_CHIP_ID_03
++	},
++
++	{ }
++};
++MODULE_DEVICE_TABLE(of, rk860x_dt_ids);
++
++static int rk860x_regulator_probe(struct i2c_client *client,
++				  const struct i2c_device_id *id)
++{
++	struct device_node *np = client->dev.of_node;
++	struct rk860x_device_info *di;
++	struct rk860x_platform_data *pdata;
++	struct regulator_config config = { };
++	unsigned int val;
++	int ret;
++
++	di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
++	if (!di)
++		return -ENOMEM;
++
++	di->desc.of_map_mode = rk860x_map_mode;
++
++	pdata = dev_get_platdata(&client->dev);
++	if (!pdata)
++		pdata = rk860x_parse_dt(&client->dev, np, &di->desc);
++
++	if (!pdata || !pdata->regulator) {
++		dev_err(&client->dev, "Platform data not found!\n");
++		return -ENODEV;
++	}
++
++	di->vsel_gpio = pdata->vsel_gpio;
++	di->sleep_vsel_id = pdata->sleep_vsel_id;
++
++	di->regulator = pdata->regulator;
++	if (client->dev.of_node) {
++		di->chip_id =
++			(unsigned long)of_device_get_match_data(&client->dev);
++	} else {
++		/* if no ramp constraint set, get the pdata ramp_delay */
++		if (!di->regulator->constraints.ramp_delay) {
++			int slew_idx = (pdata->slew_rate & 0x7)
++						? pdata->slew_rate : 0;
++
++			di->regulator->constraints.ramp_delay =
++				slew_rates[slew_idx];
++		}
++		di->chip_id = id->driver_data;
++	}
++
++	di->regmap = devm_regmap_init_i2c(client, &rk860x_regmap_config);
++	if (IS_ERR(di->regmap)) {
++		dev_err(&client->dev, "Failed to allocate regmap!\n");
++		return PTR_ERR(di->regmap);
++	}
++	di->dev = &client->dev;
++	i2c_set_clientdata(client, di);
++	/* Get chip ID */
++	ret = regmap_read(di->regmap, RK860X_ID1, &val);
++	if (ret < 0) {
++		dev_err(&client->dev, "Failed to get chip ID!\n");
++		return ret;
++	}
++
++	switch (di->chip_id) {
++	case RK860X_CHIP_ID_00:
++	case RK860X_CHIP_ID_01:
++		if ((val & DIE_ID) != 0x8) {
++			dev_err(&client->dev, "Failed to match chip ID!\n");
++			return -EINVAL;
++		}
++		break;
++	case RK860X_CHIP_ID_02:
++	case RK860X_CHIP_ID_03:
++		if ((val & DIE_ID) != 0xa) {
++			dev_err(&client->dev, "Failed to match chip ID!\n");
++			return -EINVAL;
++		}
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	/* Device init */
++	ret = rk860x_device_setup(di, pdata);
++	if (ret < 0) {
++		dev_err(&client->dev, "Failed to setup device!\n");
++		return ret;
++	}
++	/* Register regulator */
++	config.dev = di->dev;
++	config.init_data = di->regulator;
++	config.regmap = di->regmap;
++	config.driver_data = di;
++	config.of_node = np;
++
++	ret = rk860x_regulator_register(di, &config);
++	if (ret < 0)
++		dev_err(&client->dev, "Failed to register regulator!\n");
++
++	return ret;
++}
++
++static void rk860x_regulator_shutdown(struct i2c_client *client)
++{
++	struct rk860x_device_info *di;
++	int ret;
++
++	di = i2c_get_clientdata(client);
++
++	dev_info(di->dev, "rk860..... reset\n");
++
++	ret = regmap_update_bits(di->regmap, di->slew_reg,
++				 CTL_RESET, CTL_RESET);
++
++	if (ret < 0)
++		dev_err(di->dev, "force rk860x_reset error! ret=%d\n", ret);
++	else
++		dev_info(di->dev, "force rk860x_reset ok!\n");
++}
++
++static const struct i2c_device_id rk860x_id[] = {
++	{ .name = "rk8600", .driver_data = RK860X_CHIP_ID_00 },
++	{ .name = "rk8601", .driver_data = RK860X_CHIP_ID_01 },
++	{ .name = "rk8602", .driver_data = RK860X_CHIP_ID_02 },
++	{ .name = "rk8603", .driver_data = RK860X_CHIP_ID_03 },
++	{},
++};
++MODULE_DEVICE_TABLE(i2c, rk860x_id);
++
++static struct i2c_driver rk860x_regulator_driver = {
++	.driver = {
++		.name = "rk860-regulator",
++		.of_match_table = of_match_ptr(rk860x_dt_ids),
++	},
++	.probe = rk860x_regulator_probe,
++	.shutdown = rk860x_regulator_shutdown,
++	.id_table = rk860x_id,
++};
++
++module_i2c_driver(rk860x_regulator_driver);
++
++MODULE_AUTHOR("Elaine Zhang <zhangqing@rock-chips.com>");
++MODULE_DESCRIPTION("rk860x regulator driver");
++MODULE_LICENSE("GPL v2");
+-- 
+2.25.1
+

buildroot-external/board/nabucasa/green/patches/linux/0002-arm64-dts-rockchip-Add-NabuCasa-Green-board.patch

@@ -0,0 +1,714 @@
+From 2a76efca88402072b61e4cb83d6707400da8dfae Mon Sep 17 00:00:00 2001
+From: Zhangqun Ming <north_sea@qq.com>
+Date: Thu, 6 Jul 2023 10:05:04 +0000
+Subject: [PATCH 2/2] arm64: dts: rockchip: Add NabuCasa Green board
+
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3566-ha-green.dts     | 685 ++++++++++++++++++
+ 2 files changed, 686 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
+
+diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
+index 8c15593c0..997051975 100644
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -72,3 +72,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ha-green.dtb
+diff --git a/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts b/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
+new file mode 100644
+index 000000000..d0830df48
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
+@@ -0,0 +1,685 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2023 Seeed Co., Ltd.
++ *
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++
++/ {
++	model = "Home Assistant Green";
++	compatible = "rockchip,rk3566-ha-green", "rockchip,rk3566";
++
++	aliases {
++		ethernet0 = &gmac1;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc0;
++	};
++
++	chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	dc_12v: dc-12v-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "dc_12v";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <12000000>;
++		regulator-max-microvolt = <12000000>;
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_power: led-0 {
++			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_POWER;
++			color = <LED_COLOR_ID_RED>;
++			default-state = "keep";
++			linux,default-trigger = "default-on";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_power_pin>;
++		};
++		led_act: led-1 {
++			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_ACTIVITY;
++			color = <LED_COLOR_ID_GREEN>;
++			linux,default-trigger = "activity";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_act_pin>;
++		};
++		led_user: led-2 {
++			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_HEARTBEAT;
++			color = <LED_COLOR_ID_YELLOW>;
++			linux,default-trigger = "heartbeat";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_usr_pin>;
++		};
++	};
++
++	rk809-sound {
++		compatible = "simple-audio-card";
++		simple-audio-card,name = "Analog RK817";
++		simple-audio-card,format = "i2s";
++		simple-audio-card,mclk-fs = <256>;
++		simple-audio-card,widgets =
++			"Headphone", "Headphones",
++			"Speaker", "Speaker";
++		simple-audio-card,routing =
++			"Headphones", "HPOL",
++			"Headphones", "HPOR",
++			"Speaker", "SPKO";
++
++		simple-audio-card,cpu {
++			sound-dai = <&i2s1_8ch>;
++		};
++
++		simple-audio-card,codec {
++			sound-dai = <&rk809>;
++		};
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb_host";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac1 {
++	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "output";
++
++	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	/* Reset time is 20ms, 100ms for rtl8211f */
++	snps,reset-delays-us = <0 20000 100000>;
++
++	phy-handle = <&rgmii_phy1>;
++	phy-mode = "rgmii";
++
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac1m0_miim
++		     &gmac1m0_tx_bus2
++		     &gmac1m0_rx_bus2
++		     &gmac1m0_rgmii_clk
++		     &gmac1m0_rgmii_bus>;
++	status = "okay";
++
++	tx_delay = <0x47>;
++	rx_delay = <0x27>;
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: rk8601@41 {
++		compatible = "rockchip,rk8601";
++		reg = <0x41>;
++		vin-supply = <&vcc5v0_sys>;
++		regulator-compatible = "rk860x-reg";
++		regulator-name = "vdd_cpu";
++		regulator-min-microvolt = <712500>;
++		regulator-max-microvolt = <1500000>;
++		regulator-ramp-delay = <2300>;
++		rockchip,suspend-voltage-selector = <1>;
++		regulator-boot-on;
++		regulator-always-on;
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
++		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
++		#clock-cells = <1>;
++		clock-names = "mclk";
++		clocks = <&cru I2S1_MCLKOUT_TX>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
++
++		rockchip,system-power-controller;
++		#sound-dai-cells = <0>;
++		wakeup-source;
++
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-always-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-always-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&i2c1 {
++	clock-frequency = <400000>;
++	status = "okay";
++
++	rtc: rtc@51 {
++		compatible = "nxp,pcf8563";
++		reg = <0x51>;
++		#clock-cells = <0>;
++	};
++};
++
++&i2s0_8ch {
++	status = "okay";
++};
++
++&i2s1_8ch {
++	rockchip,trcm-sync-tx-only;
++	status = "okay";
++};
++
++&mdio1 {
++	rgmii_phy1: ethernet-phy@0 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x0>;
++	};
++};
++
++&pinctrl {
++	fspi {
++		fspi_dual_io_pins: fspi-dual-io-pins {
++			rockchip,pins =
++				/* fspi_clk */
++				<1 RK_PD0 1 &pcfg_pull_none>,
++				/* fspi_cs0n */
++				<1 RK_PD3 1 &pcfg_pull_none>,
++				/* fspi_d0 */
++				<1 RK_PD1 1 &pcfg_pull_none>,
++				/* fspi_d1 */
++				<1 RK_PD2 1 &pcfg_pull_none>;
++		};
++	};
++
++	ethernet {
++		eth_phy_rst: eth_phy_rst {
++			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	leds {
++		led_power_pin: led-power-pin {
++			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		led_act_pin: led-act-pin {
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++		led_usr_pin: led-user-pin {
++			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>; /* float */
++	vccio5-supply = <&vcc_1v8>;
++	vccio6-supply = <&vcc_1v8>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
++	disable-wp;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&sfc {
++	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
++	pinctrl-0 = <&fspi_dual_io_pins>;
++	pinctrl-names = "default";
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <100000000>;
++		spi-rx-bus-width = <4>;
++		spi-tx-bus-width = <1>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "SPL";
++				reg = <0x0 0xe0000>;
++			};
++			partition@e0000 {
++				label = "U-Boot Env";
++				reg = <0xe0000 0x20000>;
++			};
++			partition@100000 {
++				label = "U-Boot";
++				reg = <0x100000 0x200000>;
++			};
++			partition@300000 {
++				label = "splash";
++				reg = <0x300000 0x100000>;
++			};
++			partition@400000 {
++				label = "Filesystem";
++				reg = <0x400000 0xc00000>;
++			};
++		};
++	};
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++	phys = <&usb2phy0_host>;
++	phy-names = "usb2-phy";
++	snps,dis_u2_susphy_quirk;
++	extcon = <&usb2phy0>;
++	maximum-speed = "high-speed";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};
+-- 
+2.25.1
+

buildroot-external/board/nabucasa/green/patches/linux/0003-drivers-mfd-rk808-set-PWRON_LP_OFF_TIME-12s.patch

@@ -0,0 +1,41 @@
+From e86272fa8063a047a55a9548400a95742f1c2d2a Mon Sep 17 00:00:00 2001
+From: Zhangqun Ming <north_sea@qq.com>
+Date: Wed, 12 Jul 2023 02:33:03 +0000
+Subject: [PATCH] drivers: mfd: rk808: set PWRON_LP_OFF_TIME 12s
+
+---
+ drivers/mfd/rk808.c       | 1 +
+ include/linux/mfd/rk808.h | 5 +++++
+ 2 files changed, 6 insertions(+)
+
+diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
+index e00da7c7e..ae3c99809 100644
+--- a/drivers/mfd/rk808.c
++++ b/drivers/mfd/rk808.c
+@@ -300,6 +300,7 @@ static const struct rk808_reg_data rk817_pre_init_reg[] = {
+ 	{RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_L},
+ 	{RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK,
+ 					   RK817_HOTDIE_105 | RK817_TSD_140},
++	{RK817_PMIC_PWRON_KEY, RK817_PMIC_PWRON_KEY_MSK, RK817_PWRON_LP_OFF_TIME},
+ };
+ 
+ static const struct rk808_reg_data rk818_pre_init_reg[] = {
+diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
+index 9af1f3105..d02e56e09 100644
+--- a/include/linux/mfd/rk808.h
++++ b/include/linux/mfd/rk808.h
+@@ -644,6 +644,11 @@ enum rk809_reg_id {
+ #define RK817_ON_SOURCE_REG		0xf5
+ #define RK817_OFF_SOURCE_REG		0xf6
+ 
++#define RK817_PMIC_PWRON_KEY 	 0xf7
++#define RK817_PMIC_PWRON_KEY_MSK (0x3 << 4)
++/* 00: 6s, 01: 8s, 10: 10s, 11: 12s */
++#define RK817_PWRON_LP_OFF_TIME  (0x3 << 4)
++
+ /* INTERRUPT REGISTER */
+ #define RK817_INT_STS_REG0		0xf8
+ #define RK817_INT_STS_MSK_REG0		0xf9
+-- 
+2.25.1
+

buildroot-external/board/nabucasa/green/patches/linux/0004-arch-arm64-dts-green-Remove-spiflash-partitions.patch

@@ -0,0 +1,55 @@
+From 5f1f9863bf1031e608537945fdc97e099cb9e42c Mon Sep 17 00:00:00 2001
+From: Zhangqun Ming <north_sea@qq.com>
+Date: Sat, 15 Jul 2023 08:28:16 +0000
+Subject: [PATCH] arch: arm64: dts: green: Remove spiflash partitions
+
+---
+ .../boot/dts/rockchip/rk3566-ha-green.dts     | 31 ++-----------------
+ 1 file changed, 2 insertions(+), 29 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts b/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
+index d0830df48..66ef38600 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-ha-green.dts
+@@ -566,36 +566,9 @@ &sfc {
+ 	flash@0 {
+ 		compatible = "jedec,spi-nor";
+ 		reg = <0>;
+-		spi-max-frequency = <100000000>;
+-		spi-rx-bus-width = <4>;
++		spi-max-frequency = <25000000>;
++		spi-rx-bus-width = <1>;
+ 		spi-tx-bus-width = <1>;
+-
+-		partitions {
+-			compatible = "fixed-partitions";
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-
+-			partition@0 {
+-				label = "SPL";
+-				reg = <0x0 0xe0000>;
+-			};
+-			partition@e0000 {
+-				label = "U-Boot Env";
+-				reg = <0xe0000 0x20000>;
+-			};
+-			partition@100000 {
+-				label = "U-Boot";
+-				reg = <0x100000 0x200000>;
+-			};
+-			partition@300000 {
+-				label = "splash";
+-				reg = <0x300000 0x100000>;
+-			};
+-			partition@400000 {
+-				label = "Filesystem";
+-				reg = <0x400000 0xc00000>;
+-			};
+-		};
+ 	};
+ };
+ 
+-- 
+2.25.1
+

buildroot-external/board/nabucasa/green/patches/linux/0005-Input-rk805-pwrkey-reverse-polarity-of-pwrkey.patch

@@ -0,0 +1,41 @@
+From 32ee0c67a53f541f42b3a953e992bac12d5375d6 Mon Sep 17 00:00:00 2001
+Message-ID: <32ee0c67a53f541f42b3a953e992bac12d5375d6.1689754249.git.stefan@agner.ch>
+In-Reply-To: <fa0e84b5fbb7b6ce0b161bfcfe495f3648d02110.1689754249.git.stefan@agner.ch>
+References: <fa0e84b5fbb7b6ce0b161bfcfe495f3648d02110.1689754249.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 19 Jul 2023 10:08:06 +0200
+Subject: [PATCH] Input: rk805-pwrkey: reverse polarity of pwrkey
+
+The power key is low active. Reverse logic to avoid involuntary long
+press being reported to user space.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/input/misc/rk805-pwrkey.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/input/misc/rk805-pwrkey.c b/drivers/input/misc/rk805-pwrkey.c
+index 76873aa005b4..139419033c84 100644
+--- a/drivers/input/misc/rk805-pwrkey.c
++++ b/drivers/input/misc/rk805-pwrkey.c
+@@ -19,7 +19,7 @@ static irqreturn_t pwrkey_fall_irq(int irq, void *_pwr)
+ {
+ 	struct input_dev *pwr = _pwr;
+ 
+-	input_report_key(pwr, KEY_POWER, 1);
++	input_report_key(pwr, KEY_POWER, 0);
+ 	input_sync(pwr);
+ 
+ 	return IRQ_HANDLED;
+@@ -29,7 +29,7 @@ static irqreturn_t pwrkey_rise_irq(int irq, void *_pwr)
+ {
+ 	struct input_dev *pwr = _pwr;
+ 
+-	input_report_key(pwr, KEY_POWER, 0);
++	input_report_key(pwr, KEY_POWER, 1);
+ 	input_sync(pwr);
+ 
+ 	return IRQ_HANDLED;
+-- 
+2.41.0
+