Bump version 1.6

* Update rpi kernel 4.14.54 / Firmware / wifi

Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>

* Fix patch

* Update bluetooth-bcm43xx.mk

* Update bluetooth-bcm43xx.mk

* Update bluetooth-bcm43xx.mk

.dockerignore

@@ -1,3 +1,3 @@
-# Ignore everything except what we really need
-*
-!scripts/
+buildroot
+buildroot-external
+buildroot-patches

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,113 +0,0 @@
-name: Bug Report Form
-description: Report an issue related to the Home Assistant Operating System.
-labels: bug
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Make sure to test with the last version of the Operating System before reporting a bug.
-        If the bug appears to be a regression, make sure to check if the bug indeed disappears
-        from the previous version. Use `ha os update --version x.y` command to downgrade.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Describe the issue you are experiencing
-      description: Provide a clear and concise description of what the bug is.
-  - type: markdown
-    attributes:
-      value: |
-        ## Environment
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: What operating system image do you use?
-      options:
-        - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - generic-aarch64 (Generic UEFI capable aarch64 systems)
-        - khadas-vim3 (Khadas VIM3)
-        - odroid-c2 (Hardkernel ODROID-C2)
-        - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-m1 (Hardkernel ODROID-M1)
-        - odroid-n2 (Hardkernel ODROID-N2/N2+)
-        - odroid-xu4 (Hardkernel ODROID-XU4)
-        - ova (for Virtual Machines)
-        - rpi2 (Raspberry Pi 2)
-        - rpi3 (Raspberry Pi 3 32-bit OS)
-        - rpi3-64 (Raspberry Pi 3 64-bit OS)
-        - rpi4  (Raspberry Pi 4/400 32-bit OS)
-        - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
-        - tinker (ASUS Tinker Board/Tinker Board S)
-        - yellow (Home Assistant Yellow)
-        - green (Home Assistant Green)
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
-
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: input
-    validations:
-      required: true
-    attributes:
-      label: What version of Home Assistant Operating System is installed?
-      placeholder: "6.6"
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: Did you upgrade the Operating System.
-      options:
-        - "Yes"
-        - "No"
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Supervisor logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Supervisor` in the top right.
-
-        [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/supervisor_logs/)
-      render: txt
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Host logs that might be useful for us?
-      description: >
-        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/)
-        then choose `Host` in the top right.
-      render: txt
-  - type: textarea
-    attributes:
-      label: System information
-      description: >
-        **Optional** Copy the full System Health in this text area.
-
-        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
-        Click the copy button at the bottom of the pop-up and paste it here.
-        
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: >
-        **Optional** If you have any additional information for us, use the field below.
-        Please note, you can attach screenshots or screen recordings here, by
-        dragging and dropping files in the field below.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,21 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Report incorrect or missing information on our documentation
-    url: https://github.com/home-assistant/home-assistant.io/issues
-    about: Our documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant/issues
-    about: Our developer documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Request a feature for the Operating System
-    url: https://community.home-assistant.io/c/feature-requests
-    about: Request an new feature for the Operating System.
-
-  - name: I have a question or need support
-    url: https://www.home-assistant.io/help
-    about: We use GitHub for tracking bugs, check our website for resources on getting help.
-
-  - name: I'm unsure where to go?
-    url: https://www.home-assistant.io/join-chat
-    about: If you are unsure where to go, then joining our chat is recommended; Just ask!

.github/actions/bump-rpi-imager-version/action.yml

@@ -1,95 +0,0 @@
-name: 'Bump RPi Imager OS version'
-description: 'Bump version of Home Assistant OS in RPi Imager'
-inputs:
-  version:
-    required: true
-    description: "Version of Home Assistant OS to bump to."
-  release-date:
-    required: true
-    description: "Release date as ISO 8601 date string."
-runs:
-  using: "composite"
-  steps:
-    - shell: bash
-      id: validate-input
-      env:
-        INPUTS_DATE: ${{ inputs.release-date }}
-      run: |
-        if [[ -z "$INPUTS_DATE" ]] || [[ ! "$INPUTS_DATE" =~ ^([0-9]{4})-([0-9]{2})-([0-9]{2})T([0-9]{2}):([0-9]{2}):([0-9]{2})Z$ ]]; then
-          echo "::error::Argument 'release-date' must be an ISO 8601 date string."
-          exit 1
-        else
-          echo "date=$(date --date=${INPUTS_DATE} +'%Y-%m-%d')" >> "$GITHUB_OUTPUT"
-        fi
-
-    - shell: bash
-      run: git clone --depth 1 https://github.com/home-assistant/version.git /tmp/version
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        function bump_entry() {
-          json=$1
-          version=$2
-          release_date=$3
-          image_id=$4
-          image_name=$5
-          url="https://github.com/home-assistant/operating-system/releases/download/${version}/haos_${image_id}-${version}.img.xz"
-          temp_image=$(mktemp --suffix=.img.xz)
-          temp_out=$(mktemp)
-
-          curl -fsL -o "$temp_image" "$url"
-          image_download_size=$(stat --printf="%s" "$temp_image")
-          image_download_sha256=$(sha256sum "$temp_image" | awk '{print $1}')
-          unxz "$temp_image"
-          temp_unpacked="${temp_image%.*}"
-          extract_size=$(stat --printf="%s" "$temp_unpacked")
-          extract_sha256=$(sha256sum "$temp_unpacked" | awk '{print $1}')
-
-          entry_name="Home Assistant OS ${version} (${image_name})"
-
-            jq '
-              . as $data
-              | $data
-              | .os_list = [
-                  .os_list[]
-                  | if .name | test("Home Assistant OS .* \\(" + $image_name + "\\)") then
-                    .name = "Home Assistant OS " + $version + " (" + $image_name + ")"
-                    | .url = $url
-                    | .extract_size = ($extract_size | tonumber)
-                    | .extract_sha256 = $extract_sha256
-                    | .release_date = $release_date
-                    | .image_download_size = ($image_download_size | tonumber)
-                    | .image_download_sha256 = $image_download_sha256
-                  else .
-                  end
-                ]' \
-              --arg version "$version" \
-              --arg image_name "$image_name" \
-              --arg entry_name "$entry_name" \
-              --arg release_date "$release_date" \
-              --arg url "$url" \
-              --arg image_download_size "$image_download_size" \
-              --arg image_download_sha256 "$image_download_sha256" \
-              --arg extract_size "$extract_size" \
-              --arg extract_sha256 "$extract_sha256" \
-              "$json" > "$temp_out"
-
-          mv "$temp_out" "$json"
-          rm -rf "$temp_unpacked" "$temp_out"
-        }
-
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi3-64" "RPi 3"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi4-64" "RPi 4/400"
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        cd /tmp/version
-        git commit -am "Bump Home Assistant OS to ${INPUTS_VERSION} for RPi Imager"
-        git push
-
-    - shell: bash
-      run: rm -rf /tmp/version

.github/dependabot.yml

@@ -1,6 +0,0 @@
-version: 2
-updates:
-- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-      interval: "weekly"

.github/label-actions.yml

@@ -1,59 +0,0 @@
-assume-fixed:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    This issue is assumed to be fixed in the latest stable release. Please
-    reopen in case you can still reproduce the issue with the latest stable
-    release. You can find the latest stable release at
-    https://github.com/home-assistant/operating-system/releases/latest
-  close: true
-  close-reason: not planned
-
-core-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Core. Please check
-    the [Home Assistant Core](https://github.com/home-assistant/core/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-frontend-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Frontend. Please
-    check the [Home Assistant Frontend](https://github.com/home-assistant/frontend/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-supervisor-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Supervisor. Please
-    check the [Home Assistant Supervisor](https://github.com/home-assistant/supervisor/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-new-feature:
-  comment: >
-    :wave: @{issue-author}, thanks for your input!
-
-    We use this issue tracker to track issues of currently supported features.
-    Your request appears to request a new feature. We track potential new
-    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
-    Please check if someone already requested a similar feature, or create
-    a new feature request with the "haos" tag in that forum. Thank you!
-  close: true
-  close-reason: not planned

.github/move.yml

@@ -0,0 +1,13 @@
+# Configuration for move-issues - https://github.com/dessant/move-issues
+
+# Delete the command comment. Ignored when the comment also contains other content
+deleteCommand: true
+# Close the source issue after moving
+closeSourceIssue: true
+# Lock the source issue after moving
+lockSourceIssue: false
+# Set custom aliases for targets
+# aliases:
+#   r: repo
+#   or: owner/repo
+

.github/release-drafter.yml

@@ -1,36 +0,0 @@
-name-template: Home Assistant OS $RESOLVED_VERSION
-tag-template: $RESOLVED_VERSION
-version-template: "$MAJOR.$MINOR"
-categories:
-  - title: 'Home Assistant Operating System'
-    label: 'os'
-  - title: 'Build System'
-    label: 'build'
-  - title: 'Raspberry Pi'
-    label: 'board/raspberrypi'
-  - title: 'Home Assistant Yellow'
-    label: 'board/yellow'
-  - title: 'Home Assistant Green'
-    label: 'board/green'
-  - title: 'Open Virtual Appliance'
-    label: 'board/ova'
-  - title: 'Generic x86-64'
-    label: 'board/generic-x86-64'
-  - title: 'Hardkernel ODROID'
-    label: 'board/odroid'
-  - title: 'ASUS Tinker'
-    label: 'board/tinker'
-  - title: 'Khadas VIM Series'
-    label: 'board/khadas'
-  - title: 'Generic aarch64'
-    label: 'board/generic-aarch64'
-filter-by-commitish: true
-template: |
-  ## Changes
-
-  $CHANGES
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  default: minor

.github/workflows/artifacts-index.yaml

@@ -1,93 +0,0 @@
-name: Update artifacts index
-
-on:
-  # Manual run for specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-    secrets:
-      R2_OS_ARTIFACTS_ID:
-        required: true
-      R2_OS_ARTIFACTS_KEY:
-        required: true
-      R2_OS_ARTIFACTS_BUCKET:
-        required: true
-      R2_OS_ARTIFACTS_ENDPOINT:
-        required: true
-      CF_ZONE:
-        required: true
-      CF_PURGE_TOKEN:
-        required: true
-
-env:
-  PYTHON_VERSION: "3.10"
-
-jobs:
-  build-index:
-    name: Build Home Assistant OS artifacts index
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        run: pip install awscli
-
-      - name: Create build index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "${{ github.event.inputs.version }}/" \
-            --query 'Contents[].Key' | jq 'map(split("/")[1]) | sort' > "${{ github.event.inputs.version }}.json"
-          aws s3 cp \
-            "${{ github.event.inputs.version }}.json" \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/indexes/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}"
-
-      - name: Regenerate artifacts index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "indexes/" \
-            --query 'Contents[].Key' | jq 'map(capture("indexes/(?<version>[[:digit:]].+).json").version) | sort' > .os-artifacts/index.json
-          aws s3 sync \
-            .os-artifacts/ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-
-      - name: Flush CloudFlare cache
-        run: |
-          curl --silent --show-error --fail -X POST \
-            "https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache" \
-            -H "Authorization: Bearer ${{ secrets.CF_PURGE_TOKEN }}" \
-            -H "Content-Type: application/json" \
-            --data '{"files": [
-              "https://os-artifacts.home-assistant.io/index.html",
-              "https://os-artifacts.home-assistant.io/index.json"
-            ] }'

.github/workflows/build.yaml

@@ -1,303 +0,0 @@
-# Home Assistant Operating System build workflow
-
-name: OS build
-
-on:
-  release:
-    types: [published]
-  workflow_dispatch:
-    inputs:
-      boards:
-        description: 'List of boards to build (comma separated identifiers)'
-        required: false
-        type: string
-
-env:
-  PYTHON_VERSION: "3.10"
-
-jobs:
-  prepare:
-    name: Prepare build
-    runs-on: ubuntu-22.04
-    permissions:
-      contents: read
-      pull-requests: read
-      packages: write
-    outputs:
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}
-      version_main: ${{ steps.version.outputs.version_main }}
-      version_full: ${{ steps.version.outputs.version_full }}
-      channel: ${{ steps.channel.outputs.channel }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-      build_container_image: ghcr.io/${{ github.repository_owner }}/haos-builder@${{ steps.build_haos_builder.outputs.digest }}
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Generate development version
-        shell: bash
-        id: version_dev
-        if: ${{ github.event_name != 'release' }}
-        run: |
-          version_dev="dev$(date --utc +'%Y%m%d')"
-          echo "Development version \"${version_dev}\""
-          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ steps.version_dev.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: Get version
-        id: version
-        run: |
-          . ${GITHUB_WORKSPACE}/buildroot-external/meta
-          echo "version_main=${VERSION_MAJOR}.${VERSION_MINOR}" >> $GITHUB_OUTPUT
-          if [ -z "${VERSION_SUFFIX}" ]; then
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}"
-          else
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_SUFFIX}"
-          fi
-          echo "version_full=${version_full}" >> $GITHUB_OUTPUT
-          echo "Full version number of this release is \"${version_full}\"."
-
-      - name: Validate version
-        id: version_check
-        if: ${{ github.event_name == 'release' }}
-        run: |
-          if [ "${{ steps.version.outputs.version_full }}" != "${{ github.event.release.tag_name }}" ]; then
-            echo "Version number in Buildroot metadata does not match tag (${{ steps.version.outputs.version_full }} vs ${{ github.event.release.tag_name }})."
-            exit 1
-          fi
-
-      - name: Get channel
-        id: channel
-        run: |
-          if [[ "${{ github.event_name }}" == "release" ]]; then
-            if [[ "${{ github.event.release.prerelease }}" == "true" ]]; then
-              echo "channel=beta" >> "$GITHUB_OUTPUT"
-            else
-              echo "channel=stable" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            echo "channel=dev" >> "$GITHUB_OUTPUT"
-          fi
-
-      - name: Create build matrix
-        uses: actions/github-script@v6
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            if ("${{ github.event_name }}" == "release") {
-              return { "board": boards }
-            }
-
-            const boardFilter = "${{ github.event.inputs.boards }}"
-            if (boardFilter == "") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            } else {
-              console.log("Run partial build")
-              const boardSet = new Set(boardFilter.split(","))
-              const buildBoards = boards.filter(b => boardSet.has(b.id))
-              return { "board": buildBoards }
-            }
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.0.0
-      - name: Log in to the GitHub container registry
-        uses: docker/login-action@v3.0.0
-        with:
-            registry: ghcr.io
-            username: ${{ github.repository_owner }}
-            password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and Push
-        uses: docker/build-push-action@v5.0.0
-        id: build_haos_builder
-        with:
-          context: .
-          file: Dockerfile
-          tags: ghcr.io/${{ github.repository_owner }}/haos-builder
-          cache-from: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version_main.outputs.version_main }}
-          cache-to: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version_main.outputs.version_main }}
-          push: true
-
-  build:
-    name: Build for ${{ matrix.board.id }}
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
-    needs: prepare
-    strategy:
-      fail-fast: ${{ github.event_name == 'release' }}
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
-    runs-on: ubuntu-22.04
-
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          submodules: true
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        if: ${{ github.event_name != 'release' }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        if: ${{ github.event_name != 'release' }}
-        run: pip install awscli
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ needs.prepare.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: 'Add release PKI certs'
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Free space on build drive
-        run: |
-          # Inspired by https://github.com/easimon/maximize-build-space/blob/v7/action.yml
-          sudo rm -rf /usr/local/lib/android/sdk/ndk
-          sudo rm -rf /opt/hostedtoolcache/CodeQL
-          # Make sure cache action can restore this lcoation
-          sudo mkdir /mnt/cache
-          sudo chown -R runner:runner /mnt/cache
-
-      - name: "Restore cache: object files"
-        uses: actions/cache/restore@v3
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}
-
-      - name: Build
-        run: |
-          BUILDER_UID="$(id -u)"
-          BUILDER_GID="$(id -g)"
-          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
-            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
-            -v "/mnt/cache:/cache" \
-            ${{ needs.prepare.outputs.build_container_image }} \
-            make BUILDDIR=/build ${{ matrix.board.defconfig }}
-
-      - name: Upload artifacts
-        if: ${{ github.event_name != 'release' }}
-        working-directory: output/images/
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3 sync \
-            ./ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/${{ needs.prepare.outputs.version_full }}/ \
-            --exclude "*" \
-            --include "haos_*" \
-            --endpoint-url ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-
-      - name: Upload release assets
-        if: ${{ github.event_name == 'release' }}
-        uses: shogo82148/actions-upload-release-asset@v1
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: output/images/haos_*
-
-      - name: Print cache stats
-        run: |
-          echo "Cache size: $(du -sh /mnt/cache/cc)"
-          echo "Files total: $(find /mnt/cache/cc -mindepth 1 -type f | wc -l)"
-          echo "Old files: $(find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile | wc -l)"
-
-      - name: "Save cache: object files"
-        if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@v3
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}-${{ github.run_id }}
-
-      - name: Upload ova image to artifacts for test job
-        uses: actions/upload-artifact@v3
-        if: ${{ matrix.board.id == 'ova' }}
-        with:
-          name: ova-image
-          path: |
-            output/images/haos_ova*.qcow2.xz
-
-  test:
-    name: Test OS image
-    needs: [ build, prepare ]
-    uses: ./.github/workflows/test.yaml
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-
-  update_index:
-    name: Update artifacts index
-    if: ${{ github.event_name != 'release' }}
-    needs: [ build, prepare ]
-    uses: home-assistant/operating-system/.github/workflows/artifacts-index.yaml@dev
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-    secrets:
-      R2_OS_ARTIFACTS_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-      R2_OS_ARTIFACTS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-      R2_OS_ARTIFACTS_BUCKET: ${{ secrets.R2_OS_ARTIFACTS_BUCKET }}
-      R2_OS_ARTIFACTS_ENDPOINT: ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-      CF_ZONE: ${{ secrets.CF_ZONE }}
-      CF_PURGE_TOKEN: ${{ secrets.CF_PURGE_TOKEN }}
-
-  bump_version:
-    name: Bump ${{ needs.prepare.outputs.channel }} channel version
-    if: ${{ github.repository == 'home-assistant/operating-system' }}
-    environment: ${{ needs.prepare.outputs.channel }}
-    needs: [ build, prepare ]
-    runs-on: ubuntu-22.04
-
-    steps:
-    - name: Checkout source
-      uses: actions/checkout@v4
-      with:
-        persist-credentials: false
-
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS ${{ needs.prepare.outputs.channel }} channel version
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: ${{ needs.prepare.outputs.channel }}
-
-    - name: Bump Home Assistant OS beta channel version on stable release
-      if: ${{ needs.prepare.outputs.channel == 'stable' }}
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: beta
-
-    - name: Bump stable Home Assistant version for RPi Imager
-      if: ${{ github.event_name == 'release' && needs.prepare.outputs.channel == 'stable' }}
-      uses: "./.github/actions/bump-rpi-imager-version"
-      with:
-        version: ${{ needs.prepare.outputs.version_full }}
-        release-date: ${{ github.event.release.published_at }}

.github/workflows/label-actions.yml

@@ -1,17 +0,0 @@
-name: 'Label Actions'
-
-on:
-  issues:
-    types: [labeled, unlabeled]
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-  discussions: write
-
-jobs:
-  action:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/label-actions@v3.1.0

.github/workflows/matrix.json

@@ -1,104 +0,0 @@
-[
-  {
-    "id": "ova",
-    "defconfig": "ova",
-    "architecture": "x86-64",
-    "label": "board/ova"
-  },
-  {
-    "id": "generic-x86-64",
-    "defconfig": "generic_x86_64",
-    "architecture": "x86-64",
-    "label": "board/generic-x86-64"
-  },
-  {
-    "id": "generic-aarch64",
-    "defconfig": "generic_aarch64",
-    "architecture": "aarch64",
-    "label": "board/generic-aarch64"
-  },
-  {
-    "id": "khadas-vim3",
-    "defconfig": "khadas_vim3",
-    "architecture": "aarch64",
-    "label": "board/khadas"
-  },
-  {
-    "id": "odroid-c2",
-    "defconfig": "odroid_c2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-c4",
-    "defconfig": "odroid_c4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1",
-    "defconfig": "odroid_m1",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-n2",
-    "defconfig": "odroid_n2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-xu4",
-    "defconfig": "odroid_xu4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "rpi2",
-    "defconfig": "rpi2",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3",
-    "defconfig": "rpi3",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3-64",
-    "defconfig": "rpi3_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4",
-    "defconfig": "rpi4",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4-64",
-    "defconfig": "rpi4_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "yellow",
-    "defconfig": "yellow",
-    "architecture": "aarch64",
-    "label": "board/yellow"
-  },
-  {
-    "id": "green",
-    "defconfig": "green",
-    "architecture": "aarch64",
-    "label": "board/green"
-  },
-  {
-    "id": "tinker",
-    "defconfig": "tinker",
-    "architecture": "arm",
-    "label": "board/tinker"
-  }
-]

.github/workflows/pr-checks.yml

@@ -1,28 +0,0 @@
-# Home Assistant Operating System pull-request checks
-
-name: PR checks
-
-on: [pull_request]
-
-jobs:
-  linters:
-    runs-on: ubuntu-22.04
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v4
-      with:
-        submodules: true
-
-    - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.5.0
-      with:
-        dockerfile: Dockerfile
-
-    - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@2.0.0
-      with:
-        ignore: buildroot
-
-    - name: Check buildroot-external packages
-      run: |
-        buildroot/utils/check-package --exclude PackageHeader --br2-external buildroot-external/package/*/*

.github/workflows/release-drafter.yml

@@ -1,18 +0,0 @@
-name: Release Drafter
-
-on:
-  push:
-    branches:
-      - dev
-      - rel-*
-
-jobs:
-  update_release_draft:
-    permissions:
-      contents: write  # for release-drafter/release-drafter to create a github release
-      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
-    runs-on: ubuntu-latest
-    steps:
-      - uses: release-drafter/release-drafter@v5
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/stale.yml

@@ -1,50 +0,0 @@
-name: Stale
-
-# yamllint disable-line rule:truthy
-on:
-  schedule:
-    - cron: "40 5 * * *"
-  workflow_dispatch:
-
-jobs:
-  stale:
-    permissions:
-      issues: write  # for actions/stale to close stale issues
-      pull-requests: write  # for actions/stale to close stale PRs
-    runs-on: ubuntu-latest
-    steps:
-      # The 90 day stale policy
-      # Used for:
-      # - Issues & PRs
-      # - No PRs marked as no-stale or pinned
-      # - No issues marked as no-stale, help-wanted or pinned
-      - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v8.0.0
-        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 90
-          days-before-close: 7
-          operations-per-run: 150
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,pinned,enhancement"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. To keep our
-            backlog manageable we have to clean old issues, as many of them have
-            already been resolved with the latest updates.
-
-            Please make sure to update to the latest Home Assistant OS version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-          stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale,pinned"
-          stale-pr-message: >
-            There hasn't been any activity on this pull request recently. This
-            pull request has been automatically marked as stale because of that
-            and will be closed if no further activity occurs within 7 days.
-
-            Thank you for your contributions.

.github/workflows/test.yaml

@@ -1,94 +0,0 @@
-name: Test HAOS image
-run-name: "Test HAOS ${{ inputs.version || format('(OS build #{0})', github.event.workflow_run.run_number) }}"
-
-on:
-  # Manual test of specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to test
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      use-artifact:
-        # Workaround for GH weirdness: https://github.com/actions/runner/discussions/1884
-        description: Download OS image using actions/download-artifact
-        required: false
-        type: boolean
-        default: true
-
-jobs:
-  test:
-    if: ${{ github.event_name != 'workflow_run' || github.event.workflow_run.conclusion == 'success' }}
-
-    env:
-      NO_KVM: 1
-
-    name: Test in QEMU
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Install system dependencies
-        run: |
-          sudo apt update
-          sudo apt install -y qemu-system-x86 ovmf
-
-      - name: Setup Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: 3.12
-
-      - name: Install Python requirements
-        run:
-          pip install -r tests/requirements.txt
-
-      - name: Download HAOS image
-        if: ${{ !inputs.use-artifact }}
-        run: |
-          curl -sfL -o haos.qcow2.xz  https://os-artifacts.home-assistant.io/${{github.event.inputs.version}}/haos_ova-${{github.event.inputs.version}}.qcow2.xz
-
-      - name: Get OS image artifact
-        if: ${{ inputs.use-artifact }}
-        uses: actions/download-artifact@v3
-        with:
-          name: ova-image
-
-      - name: Extract OS image
-        run: |
-          xz -dc haos*.qcow2.xz > tests/haos.qcow2
-          rm haos*.qcow2.xz
-
-      - name: Run tests
-        run: |
-          ./tests/run_tests.sh
-
-      - name: Archive logs
-        uses: actions/upload-artifact@v3
-        if: always()
-        with:
-          name: logs
-          path: |
-            tests/lg_logs/**
-
-      - name: Archive JUnit reports
-        uses: actions/upload-artifact@v3
-        if: always()
-        with:
-          name: junit_reports
-          path: |
-            tests/junit_reports/*.xml
-
-      - name: Publish test report
-        uses: mikepenz/action-junit-report@v4
-        if: always()
-        with:
-          report_paths: 'tests/junit_reports/*.xml'
-          annotate_only: true
-          detailed_summary: true

.gitignore

@@ -1,12 +1,2 @@
-# OS generated files
-.DS_Store
-
-# Build output dirs
 /release
-output*/
-
-# Certificates
 *.pem
-
-# vscode generated files
-.vscode*

.gitmodules

@@ -1,4 +0,0 @@
-[submodule "buildroot"]
-	path = buildroot
-	url = https://github.com/home-assistant/buildroot.git
-	branch = 2022.02.x-haos

.hadolint.yaml

@@ -1,2 +0,0 @@
-ignored:
-  - DL3008

.os-artifacts/index.html

@@ -1,82 +0,0 @@
-<!DOCTYPE html>
-<html>
-    <head>
-        <title>Home Assistant OS - development builds</title>
-        <link rel="shortcut icon" href="https://brands.home-assistant.io/homeassistant/icon.png">
-        <style>
-            body {
-                font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif;
-            }
-
-            .error {
-                color: maroon;
-            }
-            </style>
-    </head>
-    <body>
-        <h1>Home Assistant OS - development builds</h1>
-        <select id="os-builds"></select>
-        <div id="os-builds-list"></div>
-        <script>
-            const buildSelect = document.getElementById('os-builds');
-            const osBuildsList = document.getElementById('os-builds-list');
-
-            const fillVersions = async () => {
-                try {
-                    const response = await fetch('/index.json');
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = "Could not load version index file.";
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const items = await response.json();
-                    items.reverse();
-
-                    items.forEach(buildVersion => {
-                        buildSelect.appendChild(new Option(buildVersion, buildVersion));
-                    });
-
-                    buildSelect.dispatchEvent(new Event('change'));
-                } catch (error) {
-                    console.error('Error fetching data:', error);
-                }
-            }
-
-            buildSelect.addEventListener('change', async function() {
-                osBuildsList.innerHTML = '';
-
-                const buildVersion = this.value;
-
-                try {
-                    const response = await fetch(`/indexes/${buildVersion}.json`);
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = `Could not load index file for version ${buildVersion}.`;
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const images = await response.json();
-
-                    const ul = document.createElement('ul');
-                    images.forEach(image => {
-                        const li = document.createElement('li');
-                        const a = document.createElement('a');
-                        a.href =`/${buildVersion}/${image}`;
-                        a.textContent = image;
-                        li.appendChild(a);
-                        ul.appendChild(li);
-                    });
-
-                    osBuildsList.appendChild(ul);
-                } catch (error) {
-                    console.error('Error fetching images:', error);
-                }
-            });
-
-            fillVersions();
-        </script>
-    </body>
-</html>

Dockerfile

@@ -1,51 +1,21 @@
-FROM debian:bullseye
-
-# Set shell
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
+FROM ubuntu:16.04
 
 # Docker
-RUN apt-get update && apt-get install -y --no-install-recommends \
+RUN apt-get update && apt-get install -y \
         apt-transport-https \
         ca-certificates \
         curl \
-        gpg-agent \
-        gpg \
-        dirmngr \
         software-properties-common \
-    && curl -fsSL https://download.docker.com/linux/debian/gpg | apt-key add - \
-    && add-apt-repository "deb https://download.docker.com/linux/debian $(lsb_release -cs) stable" \
-    && apt-get update && apt-get install -y --no-install-recommends \
-        docker-ce \
+    && rm -rf /var/lib/apt/lists/* \
+    && curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - \
+    && add-apt-repository "deb https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" \
+    && apt-get update && apt-get install -y docker-ce \
     && rm -rf /var/lib/apt/lists/*
 
-# Build tools
-RUN apt-get update && apt-get install -y --no-install-recommends \
-        bash \
-        bc \
-        binutils \
-        build-essential \
-        bzip2 \
-        cpio \
-        file \
-        git \
-        graphviz \
-        jq \
-        make \
-        ncurses-dev \
-        openssh-client \
-        patch \
-        perl \
-        python3 \
-        python3-matplotlib \
-        python-is-python3 \
-        qemu-utils \
-        rsync \
-        skopeo \
-        sudo \
-        unzip \
-        vim \
-        wget \
-        zip \
+# Build Tools
+RUN apt-get update && apt-get install -y \
+        wget patch vim cpio python unzip rsync bc bzip2 ncurses-dev \
+        git make g++ file perl bash binutils locales qemu-utils \
     && rm -rf /var/lib/apt/lists/*
 
 # Init entry

Documentation/README.md

@@ -1,9 +0,0 @@
-# Documentation
-
-## Contents
-
-- [Configuration](./configuration.md) - how users can configure HAOS
-- [Network](./network.md) - approach to networking
-- [Bluetooth](./bluetooth.md) - approach to bluetooth
-- [Kernel](./kernel.md) - kernel versions
-- [Boards](./boards/README.md) - board specific documentation

Documentation/bluetooth.md

@@ -1,9 +1,9 @@
 # Bluetooth
 
-We support `bluetoothctl` on the host. Later we want to support Bluetooth through the UI.
+We support `bluetoothctl` on host. Later we want also support bluetooth trought UI.
 All pairs and settings are persistent over reboots and updates.
 
-If you want to setup Bluetooth on the host, use the `bluetoothctl` utility.
+If you want setup bluetooth on host, use the *bluetoothctl* utility.
 
 ## Scan devices
 

Documentation/boards/README.md

@@ -1,54 +0,0 @@
-# Boards
-
-## Overview
-
-The following boards/devices are supported:
-
-- Raspberry Pi
-  - Pi 4 Model B ([1 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-1gb), [2 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-2gb), [4 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-4gb) and [8 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-8gb) model) 32-bit or 64-bit (recommended)
-  - [Pi 3 Model B](https://www.raspberrypi.com/products/raspberry-pi-3-model-b/) and [B+](https://www.raspberrypi.com/products/raspberry-pi-3-model-b-plus/) 32-bit or 64-bit (recommended)
-  - [Pi 2](https://www.raspberrypi.com/products/raspberry-pi-2-model-b/) (not recommended)
-  - [Pi Zero-W](https://www.raspberrypi.com/products/raspberry-pi-zero-w/) (not recommended)
-  - [Pi](https://www.raspberrypi.com/products/raspberry-pi-1-model-b-plus/) (not recommended)
-- Hardkernel
-  - [ODROID-C2](https://www.hardkernel.com/shop/odroid-c2/) (discontinued)
-  - [ODROID-C4](https://www.hardkernel.com/shop/odroid-c4/)
-  - [ODROID-M1](https://www.hardkernel.com/shop/odroid-m1/)
-  - [ODROID-N2](https://www.hardkernel.com/shop/odroid-n2/) (discontinued)
-  - ODROID-N2+ [2 GB](https://www.hardkernel.com/shop/odroid-n2-with-2gbyte-ram-2/) or [4 GB](https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2/)
-  - [ODROID-XU4](https://www.hardkernel.com/shop/odroid-xu4-special-price/)
-- Asus
-  - [Tinker Board](https://tinker-board.asus.com/product/tinker-board.html)
-- Generic x86-64 (UEFI, not suited for virtualization)
-  - [Intel NUC5CPYH](https://www.intel.com/content/www/us/en/products/sku/85254/intel-nuc-kit-nuc5cpyh/specifications.html)
-  - [Intel NUC6CAYH](https://www.intel.com/content/www/us/en/products/sku/95062/intel-nuc-kit-nuc6cayh/specifications.html)
-  - [Intel NUC10I3FNK2](https://www.intel.com/content/www/us/en/products/sku/195503/intel-nuc-10-performance-kit-nuc10i3fnk/specifications.html)
-  - [Gigabyte GB-BPCE-3455](https://www.gigabyte.com/Mini-PcBarebone/GB-BPCE-3455-rev-10/sp#sp)
-  - Computers supporting x86-64 architecture and UEFI boot should generally work
-- Virtual appliance (x86_64/UEFI):
-  - VMDK
-  - OVA ?
-  - VHDX ?
-  - VDI ?
-  - QCOW2 ?
-
-Notes:
-  - see ? above: are these currently supported? see ova documentation which explains issues with previous OVA distribution)
-
-## Board specifics
-
-|Board|Build|Config|Docs|
-|-----|----|------|----|
-|Pi4B 64-bit   |`make rpi4_64`       |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 32-bit   |`make rpi4`          |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|ODROID-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-M1     |`make odroid_m1`     |[odroid_m1](../../buildroot-external/configs/odroid_m1_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
-|OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|

Documentation/boards/asus/README.md

@@ -1,31 +0,0 @@
-# Tinker Board
-
-## Supported Hardware
-
-| Device         | Release Date  | Support | Config   |
-|----------------|---------------|---------|----------|
-| Tinker RK3288  | April 2017    | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
-| Tinker S RK3288| January 2018  | yes     | [tinker](../../../buildroot-external/configs/tinker_defconfig) |
-| Tinker Edge T  | November 2019 | no?     |          |
-| Tinker Edge R  | November 2019 | no?     |          |
-
-## eMMC
-
-eMMC support is provided with the same image. Just flash the image to the eMMC by connecting your Tinker Board S to your PC via Micro-USB. Refer to the Tinkerboard documentation how-to flash using Micro-USB and UMS.
-
-The Home Assistant OS provided U-Boot does support UMS as well,
-however manual intervention is necessary:
-
- 1. Set the jumper between Micro-USB and HDMI the maskrom mode
- 2. Insert SD card and connect the board via Micro-USB to your PC
- 3. Continusly press Ctrl+C to interrupt boot
- 4. Set the jumper back to the park position
- 5. Start UMS using:
-```
-ums 0 mmc 0
-```
- 6. A mass storage device should appear. Flash Home Assistant OS to it.
-
-## Serial console
-
-To access the terminal over serial console, add `console=ttyS2,115200` to `cmdline.txt`. GPIO pins are: 34 = GND / 32 = UART TXD / 33 = UART RXD.

Documentation/boards/generic-aarch64/README.md

@@ -1,36 +0,0 @@
-# Generic aarch64
-
-## Supported Hardware
-
-This board configuration aims to support most aarch64 systems with UEFI boot
-Hardware it has been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| QEMU                  | QEMU         | yes     | [generic_aarch64](../../../buildroot-external/configs/generic_aarch64_defconfig) |
-
-
-## Requirements
-
-- aarch64 support
-- UEFI boot
-
-## Wifi
-
-WiFi is untested.
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live environment using PXE or USB
-- Copy or download the Home Assistant OS image into your live environment
-- unxz the image and dd to the local hard disk
-- Reboot

Documentation/boards/generic-x86-64/README.md

@@ -1,62 +0,0 @@
-# Generic x86-64
-
-## Supported Hardware
-
-This board configuration aims to support most x86-64 systems with UEFI boot. The
-main aim is to support Intel NUC mini PCs and similar systems. Hardware it has
-been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYS        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-
-\* needs 'nomodeset' in cmdline.txt if you want a console
-
-
-## Requirements
-
-- x86-64 support
-- UEFI boot
-- SATA/AHCI or eMMC storage
-- Supported NIC:
-  - Intel Gigabit NIC (e1000, igb - via Linux mainline)
-  - Intel PCIe Gigabit NIC (e1000e - via out-of-tree module in *buildroot-external/package/intel-e1000e*)
-  - Realtek Gigabit NIC (r8169)
-  - Intel Wireless Wifi 802.11ac (iwlwifi, see below)
-
-## Wifi
-
-The following cards are supported:
-
-- Intel Wireless 3160
-- Intel Wireless 7260
-- Intel Wireless 7265
-- Intel Wireless-AC 3165
-- Intel Wireless-AC 3168
-- Intel Wireless-AC 8260
-- Intel Wireless-AC 8265
-- Intel Wireless-AC 9260
-- Intel Wireless-AC 9461
-- Intel Wireless-AC 9462
-- Intel Wireless-AC 9560
-
-## Bluetooth
-
-Bluetooth integrated in Intel Wireless cards working OK, other options untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
-- Boot PC to live environment using PXE or USB
-- Copy or download the Home Assistant OS image into your live environment
-- unxz the image and dd to the local hard disk
-- Reboot

Documentation/boards/hardkernel/README.md

@@ -1,27 +0,0 @@
-# ODROID
-
-## Supported Hardware
-
-| Device         | Release Date  | Support      | Config    |
-|----------------|---------------|--------------|-----------|
-| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | yes          | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
-| ODROID-M1      | 2022          | yes          | [odroid_m1](../../../buildroot-external/configs/odroid_m1_defconfig) |
-| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
-| ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
-
-See separate documentation for each board.
-
-## Connectivity devices
-
-### Wi-Fi
-
-The following devices have been tested on Home Assistant OS 5.8:
-
-- [Bluetooth Module 2](https://www.hardkernel.com/shop/bluetooth-module-2/)
-- [WiFi Module 3](https://www.hardkernel.com/shop/wifi-module-3/)
-
-The [WiFi Module 5A](https://www.hardkernel.com/shop/wifi-module-5a/) is not
-recommended as there is no upstream driver support available. The driver
-currently compatible with recent Linux kernel version seems to have issues
-connecting to 5GHz networks.

Documentation/boards/hardkernel/odroid-c2.md

@@ -1,22 +0,0 @@
-# ODROID-C2
-
-## eMMC
-
-eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card.
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter.
-eg. `console=ttyAML0,115200n8 console=tty0`
-
-## USB
-
-A long-standing kernel bug currently results in some odd behavior. To use the USB, a device must be plugged into one of the USB ports at hard boot. If all devices are removed from the USB ports, the USB will cease to function until a reboot.
-
-### OTG
-
-The OTG USB is untested.
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c2/hardware/expansion_connectors).

Documentation/boards/hardkernel/odroid-c4.md

@@ -1,16 +0,0 @@
-# ODROID-C4
-
-## Experimental
-
-ODROID-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
-
-Please also refer to the documentation pages for the [ODROID-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
-
-Common C4 issues that have been specifically tested and appear to be working:
-- boot from SD
-- boot from eMMC
-- MAC address obtained from eFuse
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c4/hardware/expansion_connectors).

Documentation/boards/hardkernel/odroid-m1.md

@@ -1,50 +0,0 @@
-# ODROID-M1
-
-Home Assistant OS 10 and newer support the ODROID-M1 board.
-
-## SD-card
-
-SD-card boot is supported via on-board bootloader (SPL) or recovery button.
-
-## eMMC
-
-eMMC boot via on-board bootloader requires the latest version of Petitboot
-(spiboot 20230328). To install the latest version download the SPI boot image
-from [linuxfactory.or.kr][1] as follows:
-
-1. Download `spiupdate_odroidm1_20220304.img.xz`
-2. Use balenaEtcher or another tool to flash the updater onto an SD card
-3. Download `spiboot-20230328.img`
-4. Rename the `spiboot-20230328.img` file to`spiboot.img`.
-5. Paste the `spiboot.img` file onto the FAT partition of that same SD card.
-6. Plug-in that SD card to your ODROID-M1. Petitboot will update itself, you can verify the progress on the HDMI output.
-7. If you see the version 20230328 in the top right corner, the installation was successful.
-  * If you see any other version there, the installation failed. 
-
-Once Petitboot is updated you can flash Home Assistant OS directly onto an eMMC.
-
-## NVMe
-
-Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
-
-## Technical notes on boot flow
-
-The Home Assistant OS image is bootable by the SoC directly. This means that no help
-from the Hardkernel provided and pre-installed bootloader Petitboot is necessary.
-However, the ODROID-M1 automatically boots from internal SPI. To boot
-directly off the SD-card or eMMC you need to press the recovery button.
-
-The SPI flashed U-Boot SPL tries searches for an U-Boot binary on the SD-card
-(and from eMMC with Petitboot 20230328 and later). This mechanism allows you to
-boot the Home Assistant OS U-Boot without pressing the recovery button.
-
-## Console
-
-By default, console access is available on the serial header (CON1) and on HDMI.
-The serial console's baudrate is 1500000 by default.
-
-The systemd startup messages will only appear on the serial console by default.
-To show the messages on the HDMI console instead, add the console manually
-to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).
-
-[1]: http://ppa.linuxfactory.or.kr/images/petitboot/odroidm1/

Documentation/boards/hardkernel/odroid-n2.md

@@ -1,18 +0,0 @@
-# ODROID-N2
-
-## eMMC
-
-eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card.
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter.
-eg. `console=ttyAML0,115200n8 console=tty0`
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-n2/hardware/expansion_connectors).
-At this point not all functionality is supported by the upstream kernel used
-by Home Assistant OS.
-
-The GPIO on pin 11 is used as a low active power button input.

Documentation/boards/hardkernel/odroid-xu4.md

@@ -1,29 +0,0 @@
-# ODROID-XU4
-
-## eMMC
-
-The ODROID XU4 uses the eMMC boot partition to boot from. Typically eMMC readers can't write to this eMMC boot partition. There are a couple of possibilities:
-
-1. **Working** e.g. the eMMC already had a working image before flashing HassOS:
-   - It will be booting to U-Boot (but no further).
-     - If you have the serial adapter, you should be able to enter `distro_bootcmd` at the uboot prompt to continue booting.
-     - If not, flash the HassOS image to an SD card and boot off that temporarily (while the eMMC is also plugged in).
-   - Once booted, login at the prompts and then enter `dd if=/dev/mmcblk0 of=/dev/mmcblk0boot0 bs=512 skip=63 seek=62 count=1440` at the linux prompt.
-   - Reboot with eMMC (don't forget to flip the boot switch to eMMC)
-2. **Not Working** e.g. a clean/wiped/corruped eMMC boot partition:
-   - You'll need to follow [Hardkernel's instructions](https://forum.odroid.com/viewtopic.php?f=53&t=6173) to get a working boot sector. Then flash HassOS and follow instructions above.
-   - Alternatively, you can try flash HassOS to both an SD and eMMC, then boot off the SD with the eMMC also plugged in, then run `dd if=/dev/mmcblk1 of=/dev/mmcblk0boot0 bs=512 skip=1 seek=0 count=16381` at the Linux prompt. Note that this is untested, but in theory should work..
-
-If you are getting permissions issues when using the dd command, try disabling RO:
-`echo 0 > /sys/block/mmcblk0boot0/force_ro`
-to re-enable after running dd:
-`echo 1 > /sys/block/mmcblk0boot0/force_ro`
-
-## Console
-
-By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the SAC2 console if you don't plan on using the serial adapter.
-eg. `console=tty1 console=ttySAC2,115200`
-
-## GPIO
-
-Refer to [the odroid wiki](https://wiki.odroid.com/odroid-xu4/hardware/expansion_connectors).

Documentation/boards/ova.md

@@ -0,0 +1,16 @@
+# OVA
+
+The OVA stay for open virtual appliance. Currently we had remove the ova files and publish a vmdk virtual disk,
+until we have better OVF template to generate our OVA. This vmdk work with (maybe you need convert the disk):
+- HyperV
+- VirtualBox
+- VMware
+
+## Virtual Machine
+
+You can use this vmdk in a virtual machine with follow requirements:
+- OS: Linux 64bit
+- UEFI boot
+- min. 1GB RAM
+- 2x vcpu
+- 1x Network

Documentation/boards/ova/README.md

@@ -1,22 +0,0 @@
-# Virtual Machine
-
-## Supported Hypervisors
-
-| Hypervisor          | Vendor    | Support         | Config             |
-|---------------------|-----------|-----------------|--------------------|
-| HyperV              | Microsoft | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-| VirtualBox          | Oracle    | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-| VMware              | VMware    | yes, via VMDK   | [ova](../../../buildroot-external/configs/ova_defconfig)              |
-
-Currently we only publish a VMDK virtual disk due to issues with our previous OVA distribution. We are investigating our options to bring back the OVA distribution, however, the VMDK works for the hypervisors listed above.
-
-## Requirements
-
-Using this VMDK in a virtual machine requires the following:
-
-- Operating system: Other 4.x or later Linux (64-bit)
-- Enabled support for UEFI boot
-- SATA disk controller
-- Minimal of 1GB RAM
-- At least 2x vCPU
-- An assigned network

Documentation/boards/raspberrypi.md

@@ -0,0 +1,19 @@
+# Raspberry PI
+
+Supported Hardware:
+
+| Device | Board | 
+|--------|-----------|
+| Raspberry Pi A+/B/B+| rpi |
+| Raspberry Pi Zero | rpi |
+| Raspberry Pi Zero W | rpi0-w |
+| Raspberry Pi 2 B | rpi2 |
+| Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |
+
+## Serial console
+
+For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.
+
+## Tweaks
+
+If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.

Documentation/boards/raspberrypi/README.md

@@ -1,50 +0,0 @@
-# Raspberry PI
-
-## Supported Hardware
-
-| Device              | Release Date  | Support         | Config             |
-|---------------------|---------------|-----------------|--------------------|
-| Raspberry Pi B/B+/A+|2012/2014/2014 | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
-| Raspberry Pi 2 B    |2015           | not recommended | [rpi2](../../../buildroot-external/configs/rpi2_defconfig)             |
-| Raspberry Pi 3 B/B+ |2016/2018      | yes             | [rpi3](../../../buildroot-external/configs/rpi3_defconfig) / [rpi3_64](../../../buildroot-external/configs/rpi3_64_defconfig) |
-| Raspberry Pi 4 B    |2019           | yes             | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
-
-## Serial console
-
-For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1`, `dtoverlay=pi3-disable-bt` into `config.txt`. GPIO pins are: 6 = GND / 8 = UART TXD / 10 = UART RXD.
-
-## I2C
-
-Add `dtparam=i2c1=on` and `dtparam=i2c_arm=on` to `config.txt`. After that we create a module file on host with [config usb stick][config] or direct into `/etc/modules-load.d`.
-
-rpi-i2c.conf:
-```
-i2c-dev
-i2c-bcm2708
-```
-
-## USB Boot
-
-USB mass storage boot is available on Raspberry Pi 4 (64-bit only), 3B, 3B+, 3A+, and 2B v1.2.
-
-For Raspberry 3B, 3A+ and 2B v1.2, to enable USB boot, add `program_usb_boot_mode=1` into `config.txt`. Note that this **permanently** alters the one-time programmable memory of the device.
-
-For Raspberry 4
-
-* Make sure to update the bootloader to a stable release supporting USB mass storage boot (see [bcm2711_bootloader_config.md](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md#usbmassstorageboot)). 
-* If no SD card is used add `sd_poll_once=on` to `dtparam` in `config.txt` (comma separated). This gets rid of `mmc0: timeout waiting for hardware interrupt` kernel errors.
-* If install still fails, then your SSD likely needs quirks enabled to work correctly (see [Finding the VID and PID of your USB SSD](https://www.raspberrypi.org/forums/viewtopic.php?t=245931)). Once you find your adapter's ID, add the quirks parameter in `cmdline.txt`. 
-
-For more information see [RaspberryPi](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md).
-
-### Caveats
-
-* All bootable SD cards must be removed.
-* Boot time can be significantly longer with USB. This is due to the boot process first attempting to boot from SD card, failing, and resorting to USB.
-* Many USB drives simply do not work for boot. This is likely due to minimal driver support in uboot and will not be fixed. If you can't get it to boot on one drive, try a different brand/model. SanDisk Cruzer drives seem to have a higher rate of issues.
-
-## Tweaks
-
-If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
-
-[config]: ../../configuration.md#automatic

Documentation/build.md

@@ -0,0 +1,21 @@
+# Building
+
+Running `sudo ./enter.sh` will get you into the build Docker container.   
+`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+
+## Scripts
+
+
+
+## Helpers
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig`
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config`

Documentation/configuration.md

@@ -2,62 +2,39 @@
 
 ## Automatic
 
-You can use an USB drive with HassOS to configure network options, SSH access to the host and to install updates.
-Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG` (in all capitals). Alternative you can create a `CONFIG` folder inside the `boot` partition. Use the following directory structure within the USB drive:
+You can use a USB drive with HassOS to configure network options, ssh access to the host, and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Use the following directory structure within the USB drive:
 
-```text
+```
 network/
 modules/
-modprobe/
-udev/
 authorized_keys
-timesyncd.conf
 hassos-xy.raucb
 ```
 
-- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md].
+- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
 - The `modules` folder is for modules-load configuration files.
-- The `modprobe` folder is for modules configuration files (/etc/modprobe.d)
-- The `udev` folder is for udev rules files.
-- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Home Assistant][debug-homeassistant].
-- The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
-- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page.
+- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 
 
-Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
-
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later using `ha os import` from the CLI or by calling `systemctl restart hassos-config` on the OS shell. *The USB Stick just needs to be inserted to the device during this setup process and can be removed afterwards.*
+You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host.
 
 ## Local
 
 ### Bootargs
 
-You can edit or create a `cmdline.txt` in your boot partition. That will be read from the bootloader.
+You can edit or create a `cmdline.txt` into your boot partition. That will be read from our bootloader.
 
 ### Kernel-Module
 
-The kernel module folder `/etc/modules-load.d` is persistent and you can add your configuration files there. See [Systemd modules load][systemd-modules]. You can add the modules configuration files in `/etc/modprobe.d` that is also persistent.
-
-### Udev rules
-
-The udev rules folder `/etc/udev/rules.d` is persistent and you can add your configuration files there.
+The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].
 
 ### Network
 
-You can manual add, edit or remove connections configurations from `/etc/NetworkManager/system-connections`.
-
-### NTP
-
-You can manual edit the systemd timesync file on `/etc/systemd/timesyncd.conf`.
-
-Our default NTP configuration look like:
-
-```
-[Time]
-NTP=time.cloudflare.com
-FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
-```
+You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.
 
 [systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
 [network.md]: network.md
 [hassos-release]: https://github.com/home-assistant/hassos/releases/
-[debug-homeassistant]: https://developers.home-assistant.io/docs/operating-system/debugging
+[debug-hassio]: https://developers.home-assistant.io/docs/en/hassio_debugging.html

Documentation/deployment.md

@@ -0,0 +1,27 @@
+# Deployment
+
+We know 3 types of release builds:
+- development (beta/dev)
+- staging (rc)
+- production (stable)
+
+## Versioning
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development use here own major number they will be bump for the stable version and the development version go to next major number.
+
+```
+0.x = development
+1.x = stable
+2.x = development
+3.x = stable
+```
+
+## GIT Branch/Tag
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch hould the development
+version from they we build a beta release.
+
+If we create a new staging/productive release, we create a new branch `rel-{MAJOR}`. They will be used for the hole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.

Documentation/kernel.md

@@ -1,24 +0,0 @@
-
-# Kernel Version
-
-Default Kernel tree: 6.1
-
-| Board | Version |
-|-------|---------|
-| Open Virtual Appliance | 6.1.60 |
-| Raspberry Pi | 6.1.58 |
-| Raspberry Pi 0-W | 6.1.58 |
-| Raspberry Pi 2 | 6.1.58 |
-| Raspberry Pi 3 | 6.1.58 |
-| Raspberry Pi 4 | 6.1.58 |
-| Home Assistant Yellow | 6.1.58 |
-| Home Assistant Green | 6.1.60 |
-| Tinker Board | 6.1.60 |
-| ODROID-C2 | 6.1.60 |
-| ODROID-C4 | 6.1.60 |
-| ODROID-M1 | 6.1.60 |
-| ODROID-N2 | 6.1.60 |
-| ODROID-XU4 | 6.1.60 |
-| Generic aarch64 | 6.1.60 |
-| Generic x86-64 | 6.1.60 |
-| Khadas VIM3 | 6.1.60 |

Documentation/network.md

@@ -1,52 +1,20 @@
 # Network
 
-Home Assistant Operating System uses NetworkManager to control the host network.
+HassOS uses NetworkManager to control the host network. In future releases, you can set up the configuration using the API/UI.
+Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
 
-## Configure network
+## Configuration Examples
 
-By default the device will be in DHCP state.
-
-Basic network settings can be set through the Supervisor frontend in the System
-tab. Advanced configurations such as VLAN are also available through the
-`ha network` CLI command.
-
-To restore the default configuration the `ha network` CLI command can be used as
-well:
-
-```
-ha network update default --ipv4-method auto
-```
-
-If more advanced network settings are required network connection files can be
-placed on a USB drive and imported to the host as described in
-[Configuration][configuration-usb].
-
-## Manual Network Configuration
-
-If the frontend or `ha network` CLI cannot meet your use case, it is still
-possible to configure the underlying NetworkManager manually.
-
-You can read the [NetworkManager manual][nm-manual] or find many configuration
-examples across the internet. Note that changes to `NetworkManager.conf` are
-not supported currently, only connection keyfiles are supported. Keep in mind
-that the system is read-only. If you don't want the IP address to change on
-every boot, you should modify the UUID property to a generic [UUID4][uuid].
-Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a
-file called `my-network` and add the appropriate contents below:
-
-**NOTE: Please make sure to save this file with UNIX line endings (LF, and not Windows' default CRLF endings). You can do this using Notepad these days!**
+You can look also into [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you not want change the IP address every boot, you should set the uuid property with a generic [UUID4][uuid].
 
 ### Default
 
-A preinstalled connection profile for wired network is active by default:
-
-```ini
+We have a preinstalled connection profile:
+```
 [connection]
-id=Home Assistant OS default
+id=HassOS default
 uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
 type=802-3-ethernet
-llmnr=2
-mdns=2
 
 [ipv4]
 method=auto
@@ -56,15 +24,12 @@ addr-gen-mode=stable-privacy
 method=auto
 ```
 
-### Wired connection to the LAN
-
+### LAN
 ```ini
 [connection]
-id=my-network
+id=hassos-network
 uuid=d55162b4-6152-4310-9312-8f4c54d86afa
 type=802-3-ethernet
-llmnr=2
-mdns=2
 
 [ipv4]
 method=auto
@@ -74,24 +39,21 @@ addr-gen-mode=stable-privacy
 method=auto
 ```
 
-### Wireless LAN WPA/PSK
-
+### Wireless WPA/PSK
 ```ini
 [connection]
-id=my-network
+id=hassos-network
 uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
 type=802-11-wireless
 
-[802-11-wireless]
+[wifi]
 mode=infrastructure
 ssid=MY_SSID
-# Uncomment below if your SSID is not broadcasted
-#hidden=true
 
-[802-11-wireless-security]
+[wifi-security]
 auth-alg=open
 key-mgmt=wpa-psk
-psk=MY_WLAN_SECRET_KEY
+psk=MY_WLAN_SECRED_KEY
 
 [ipv4]
 method=auto
@@ -103,91 +65,34 @@ method=auto
 
 ### Static IP
 
-Replace the following configuration:
-
+Replace follow configs:
 ```ini
 [ipv4]
 method=manual
-address=192.168.1.111/24;192.168.1.1
+address1=192.168.1.111/24,192.168.1.1
 dns=8.8.8.8;8.8.4.4;
 ```
 
-For `address`, the value before the semicolon is the IP address and subnet prefix bitlength. The second value (after the semicolon) is the IP address of the local gateway.
-
 ## Tips
 
 ### Reset network
 
-If you want to reset the network configuration back to the default connection
-profile using DHCP, use the following commands on the host console:
-
+If you want reset the network configuration to default, use follow commands on host:
 ```bash
-# rm -r /mnt/overlay/etc/NetworkManager/system-connections
-# reboot
+$ rm /etc/NetworkManager/system-connections/*
+$ cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
+$ nmcli con reload
 ```
 
-Home Assistant OS will recreate the default connection profile during boot.
-
-### Enabling Wi-Fi
-
-Wi-Fi is discouraged for reliability reasons. However, if you still prefer to use Wi-Fi, you can us the `ha network` command to set up Wi-Fi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports Wi-Fi and the name of the Wi-Fi device):
-
-```bash
-ha network update wlan0 --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid "MY-SSID" --wifi-psk MY_PASS
-````
-
 ### Powersave
 
-If you have trouble with powersave then apply the following changes:
-
+If you have trouble with powersave you can do following:
 ```ini
 [wifi]
 # Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
 powersave=0
 ```
 
-## Using `nmcli` to set a static IPv4 address
-
-Log into the the Home Assistant OS base system via a console:
-
-```bash
-Welcome to Home Assistant
-homeassistant login:
-```
-
-- Login as `root` (no password needed). At the `ha >` prompt, type `login` (as instructed).
-
-From there you use the `nmcli` configuration tool.
-
-- `# nmcli con show` will list the "Home Assistant OS default" connection in use.
-- `# nmcli con show "Home Assistant OS default"` will list all the properties of the connection.
-
-To start editing the configuration setting for "Home Assistant OS default":
-
-```bash
-# nmcli con edit "Home Assistant OS default"
-```
-
-To add your static IP address (select 'yes' for manual method);
-
-```bash
-nmcli> set ipv4.addresses 192.168.100.10/24
-Do you also want to set 'ipv4.method' to 'manual'? [yes]:
-```
-
-In addition, it's recommended to set the DNS server and the local gateway. For most home routers the DNS server will have the same IP address as the router itself. If you are using Pi-Hole or a third-party DNS system then you can set the DNS server to that.
-
-```bash
-nmcli> set ipv4.dns 192.168.100.1
-nmcli> set ipv4.gateway 192.168.100.1
-```
-
-`nmcli> print ipv4` will show you the IPv4 properties of this connection. With `nmcli> save` you will save the changes afterwards.
-
-If you now view the default connection `cat /etc/NetworkManager/system-connections/default` you should see the method is manual and the address is set.
-
-Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.
-
-[nm-manual]: https://networkmanager.dev/docs/api/1.40/manpages.html
+[keyfile]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
 [configuration-usb]: configuration.md
-[uuid]: https://www.uuidgenerator.net/version4
+[uuid]: https://www.uuidgenerator.net/

Makefile

@@ -1,50 +0,0 @@
-BUILDDIR:=$(shell pwd)
-
-BUILDROOT=$(BUILDDIR)/buildroot
-BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
-DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
-
-TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-
-# Set O variable if not already done on the command line
-ifneq ("$(origin O)", "command line")
-O := $(BUILDDIR)/output
-else
-override O := $(BUILDDIR)/$(O)
-endif
-
-.NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) all
-
-.PHONY: $(TARGETS) $(TARGETS_CONFIG) all clean help
-
-all: $(TARGETS)
-
-savedefconfig:
-	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "savedefconfig"
-
-$(TARGETS_CONFIG): %-config:
-	@echo "config $*"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
-
-$(TARGETS): %: %-config
-	@echo "build $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
-
-	# Do not clean when building for one target
-ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)
-	@echo "clean $@"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
-endif
-	@echo "finished $@"
-
-clean:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
-
-help:
-	@echo "Supported targets: $(TARGETS)"
-	@echo "Run 'make <target>' to build a target image."
-	@echo "Run 'make all' to build all target images."
-	@echo "Run 'make clean' to clean the build output."
-	@echo "Run 'make <target>-config' to configure buildroot for a target."

README.md

@@ -1,58 +1,14 @@
-# Home Assistant Operating System
+# HassOS
+Hass.io OS based on [buildroot](https://buildroot.org/). It's a hypervisor for Docker and supports various kind of IoT hardware. It is also available as virtual appliance. The whole system is optimized for embedded system and  security. You can update the system simple with OTA updates or offline updates.
 
-Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
+## Focus
 
-Home Assistant Operating System uses Docker as its container engine. By default it deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
-
-## Features
-
-- Lightweight and memory-efficient
-- Minimized I/O
-- Over The Air (OTA) updates
-- Offline updates
-- Modular using Docker container engine
-
-## Supported hardware
-
-- Raspberry Pi
-- Hardkernel ODROID
-- Asus Tinker Board
-- Generic x86-64 (e.g. Intel NUC)
-- Virtual appliances
-
-See the full list and specific models [here](./Documentation/boards/README.md)
-
-## Getting Started
-
-If you just want to use Home Assistant the official [getting started guide](https://www.home-assistant.io/getting-started/) and [installation instructions](https://www.home-assistant.io/hassio/installation/) take you through how to download Home Assistant Operating System and get it running on your machine.
-
-If you're interested in finding out more about Home Assistant Operating System and how it works read on...
-
-## Development
-
-If you don't have experience with embedded systems, Buildroot or the build process for Linux distributions it is recommended to read up on these topics first (e.g. [Bootlin](https://bootlin.com/docs/) has excellent resources).
-
-The Home Assistant Operating System documentation can be found on the [Home Assistant Developer Docs website](https://developers.home-assistant.io/docs/operating-system).
-
-### Components
-
-- **Bootloader:**
-  - [Barebox](https://barebox.org/) for devices that support UEFI
-  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support UEFI
-- **Operating System:**
-  - [Buildroot](https://buildroot.org/) LTS Linux
-- **File Systems:**
-  - [SquashFS](https://www.kernel.org/doc/Documentation/filesystems/squashfs.txt) for read-only file systems (using LZ4 compression)
-  - [ZRAM](https://www.kernel.org/doc/Documentation/blockdev/zram.txt) for `/tmp`, `/var` and swap (using LZ4 compression)
-- **Container Platform:**
-  - [Docker Engine](https://docs.docker.com/engine/) for running Home Assistant components in containers
-- **Updates:**
-  - [RAUC](https://rauc.io/) for Over The Air (OTA) and USB updates
-- **Security:**
-  - [AppArmor](https://apparmor.net/) Linux kernel security module
-
-### Development builds
-
-The Development build GitHub Action Workflow is a manually triggered workflow
-which creates Home Assistant OS development builds. The development builds are
-available at [https://os-artifacts.home-assistant.io/index.html](https://os-artifacts.home-assistant.io/index.html).
+- Linux kernel 4.14 (LT)
+- Barebox as bootloader on EFI
+- U-Boot as bootloader on IoT
+- RAUC for OTA updates
+- SquashFS LZ4 as filesystem
+- Docker 18.03.1
+- AppArmor protected
+- ZRAM LZ4 for /tmp, /var, swap
+- Run every supervisor

buildroot-external/Config.in

@@ -1,18 +1,4 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/gasket/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hassos/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"

buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt

@@ -1 +0,0 @@
-console=tty1 console=ttyS0

buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg

@@ -1,85 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
-        default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
-        break
-    fi
-done
-
-# No bootable slot found, choose rescue...
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
-    fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
-    fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}

buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
-
-    mkdir -p "${BOOT_DATA}/EFI/BOOT"
-
-    cp "${BOARD_DIR}/grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" create
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual qcow2
-
-    convert_disk_image_zip vmdk
-    convert_disk_image_xz qcow2
-
-    convert_disk_image_xz
-}
-

buildroot-external/board/arm-uefi/generic-aarch64/kernel.config

@@ -1,32 +0,0 @@
-CONFIG_EFI_STUB=y
-
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_VIRTIO_INPUT=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_BLK_SCSI=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_VIRTIO_VSOCKETS=m
-CONFIG_VIRTIO_MMIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=y
-
-CONFIG_NVME_CORE=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_HWMON=y
-
-CONFIG_DRM_VIRTIO_GPU=m
-
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_HYPERV_KEYBOARD=m
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_VSOCKETS=m
-CONFIG_PCI_HYPERV=m
-CONFIG_PCI_HYPERV_INTERFACE=m
-CONFIG_FB_HYPERV=y

buildroot-external/board/arm-uefi/generic-aarch64/meta

@@ -1,11 +0,0 @@
-BOARD_ID=generic-aarch64
-BOARD_NAME="Generic aarch64"
-CHASSIS=embedded
-BOOTLOADER=grub
-KERNEL_FILE=Image
-BOOT_SYS=efi
-BOOT_SIZE=32M
-BOOT_SPL=false
-DISK_SIZE=6
-SUPERVISOR_MACHINE=qemuarm-64
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/asus/hassos-hook.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp -t "${BOOT_DATA}" \
-        "${BINARIES_DIR}/boot.scr" \
-        "${BINARIES_DIR}/rk3288-tinker.dtb" \
-        "${BINARIES_DIR}/rk3288-tinker-s.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-
-    echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=8192
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}

buildroot-external/board/asus/tinker/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/asus/tinker/meta

@@ -1,12 +0,0 @@
-BOARD_ID=tinker
-BOARD_NAME="Asus TinkerBoard"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=zImage
-BOOT_SYS=hybrid
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=tinker
-SUPERVISOR_ARCH=armv7

buildroot-external/board/asus/tinker/patches/README.md

@@ -1,5 +0,0 @@
-## Kernel
-https://github.com/armbian/build/tree/master/patch/kernel/rockchip-next
-
-## u-boot
-https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-rockchip/board_tinkerboard

buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch

@@ -1,55 +0,0 @@
-From 3553f8a938dbb498aa1846a37ea343b7f53739da Mon Sep 17 00:00:00 2001
-Message-Id: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 17 Feb 2021 19:55:41 +0100
-Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
- RK3288"
-
-This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
----
- arch/arm/boot/dts/rk3288.dtsi | 8 --------
- 1 file changed, 8 deletions(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 487b0e03d4b4..1569b1824c89 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -378,8 +378,6 @@ uart0: serial@ff180000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart0_xfer>;
- 		status = "disabled";
-@@ -393,8 +391,6 @@ uart1: serial@ff190000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart1_xfer>;
- 		status = "disabled";
-@@ -421,8 +417,6 @@ uart3: serial@ff1b0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart3_xfer>;
- 		status = "disabled";
-@@ -436,8 +430,6 @@ uart4: serial@ff1c0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- 		clock-names = "baudclk", "apb_pclk";
--		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
--		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart4_xfer>;
- 		status = "disabled";
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch

@@ -1,55 +0,0 @@
-From 695638c05c0bb6f7bcc65e172dd132b3aa280b47 Mon Sep 17 00:00:00 2001
-Message-Id: <695638c05c0bb6f7bcc65e172dd132b3aa280b47.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
-
-Taken from, and tested by @TonyMac32 .
-
-Well, the original one was tested by him but I had to adapt the
-registers definitions to the new 64-bits LPAE-compliant syntax.
-
-Therefore that *might* break, along with a few other patches.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
-[move change to rk3288-tinker.dtsi]
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 09618bb7d872..30430d2e64b9 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -483,6 +483,25 @@ &sdio0 {
- 	status = "okay";
- };
- 
-+&spi2 {
-+	max-freq = <50000000>;
-+	status = "okay";
-+
-+	spidev@0 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x0 0>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+
-+	spidev@1 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x1>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch

@@ -1,41 +0,0 @@
-From d04122215cb56b57458e05b475e41744b8126533 Mon Sep 17 00:00:00 2001
-Message-Id: <d04122215cb56b57458e05b475e41744b8126533.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
-
-Enable I2C devices which are accessible via 40-pin header.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 30430d2e64b9..395afc2b2283 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -342,10 +342,18 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2c1 {
-+	status = "okay";
-+};
-+
- &i2c2 {
- 	status = "okay";
- };
- 
-+&i2c4 {
-+	status = "okay";
-+};
-+
- &i2c5 {
- 	status = "okay";
- };
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch

@@ -1,34 +0,0 @@
-From 7d37754f29c379c5066c6abf38c8d01d654b1613 Mon Sep 17 00:00:00 2001
-Message-Id: <7d37754f29c379c5066c6abf38c8d01d654b1613.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
-
-The spi2_cs1 pin reference is missing in the spi2 first pin control
-definition.
-
-This patch is taken from the patches provided by the ARMbian team.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
-index 1569b1824c89..478fd1bb85df 100644
---- a/arch/arm/boot/dts/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rk3288.dtsi
-@@ -311,7 +311,7 @@ spi2: spi@ff130000 {
- 		dma-names = "tx", "rx";
- 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
- 		reg = <0x0 0xff130000 0x0 0x1000>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch

@@ -1,31 +0,0 @@
-From 05fde1d1dbbe7805a58a8c445b8fb19e0df59826 Mon Sep 17 00:00:00 2001
-Message-Id: <05fde1d1dbbe7805a58a8c445b8fb19e0df59826.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:16:05 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
-
-Taken from the various patches provided by @TonyMac32 .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index 395afc2b2283..c7e79e594720 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
- 				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <750000>;
--				regulator-max-microvolt = <1400000>;
-+				regulator-max-microvolt = <1450000>;
- 				regulator-name = "vdd_arm";
- 				regulator-ramp-delay = <6000>;
- 				regulator-state-mem {
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch

@@ -1,119 +0,0 @@
-From 940d61e1e04929166d5a2bcbc1934aa931952ca5 Mon Sep 17 00:00:00 2001
-Message-Id: <940d61e1e04929166d5a2bcbc1934aa931952ca5.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Sun, 7 Jan 2018 01:52:44 +0100
-Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
-
-On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
-rebooting, the system will be dead, as the SDMMC is the only way to
-boot anything, and the hardware doesn't power up the SDMMC hardware
-automatically when rebooting.
-
-So, when using an ASUS Tinkerboard system, a new reboot handler is
-installed. This reboot handler takes care of powering the SDMMC
-hardware again before restarting the system, resolving the issue.
-
-The code was inspired by the pwrseq_emmc.c, which seems to overcome
-similar effects with eMMC hardware.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
----
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
-diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index 2a99f15f527f..181718374429 100644
---- a/drivers/mmc/host/dw_mmc-rockchip.c
-+++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -12,6 +12,11 @@
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- 
-+#include <linux/regulator/consumer.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include "../core/core.h"
-+
- #include "dw_mmc.h"
- #include "dw_mmc-pltfm.h"
- 
-@@ -340,6 +345,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
- };
- MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
- 
-+struct dw_mci_rockchip_broken_boards_data {
-+	struct notifier_block reset_nb;
-+	struct platform_device *pdev;
-+};
-+
-+/* This reboot handler handles cases where disabling the SDMMC on
-+ * reboot will cause the hardware to be unable to start correctly
-+ * after rebooting.
-+ * 
-+ * This happens with Tinkerboard systems...
-+ */
-+static int dw_mci_rockchip_broken_boards_reset_nb(
-+	struct notifier_block *this,
-+	unsigned long mode, void *cmd)
-+{
-+	struct dw_mci_rockchip_broken_boards_data const *data =
-+		container_of(this,
-+			struct dw_mci_rockchip_broken_boards_data,
-+			reset_nb);
-+	struct dw_mci *host = platform_get_drvdata(data->pdev);
-+	struct mmc_host *mmc = host->slot->mmc;
-+
-+	printk(KERN_ERR "Meow.\n");
-+
-+	mmc_power_off(mmc);
-+
-+	mdelay(20);
-+
-+	if (!IS_ERR(mmc->supply.vmmc))
-+		regulator_enable(mmc->supply.vmmc);
-+
-+	if (!IS_ERR(mmc->supply.vqmmc))
-+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
-+
-+	printk(KERN_ERR "woeM.\n");
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
-+	struct platform_device *pdev)
-+{
-+	struct dw_mci_rockchip_broken_boards_data *data;
-+
-+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
-+		return;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return;
-+
-+	data->reset_nb.notifier_call =
-+		dw_mci_rockchip_broken_boards_reset_nb;
-+	data->reset_nb.priority = 255;
-+	register_restart_handler(&data->reset_nb);
-+
-+	data->pdev = pdev;
-+}
-+
- static int dw_mci_rockchip_probe(struct platform_device *pdev)
- {
- 	const struct dw_mci_drv_data *drv_data;
-@@ -367,6 +432,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
- 	}
- 
- 	pm_runtime_put_autosuspend(&pdev->dev);
-+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
- 
- 	return 0;
- }
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch

@@ -1,63 +0,0 @@
-From 479e2acb95c09b15382b3766391294790ebd200b Mon Sep 17 00:00:00 2001
-Message-Id: <479e2acb95c09b15382b3766391294790ebd200b.1676488094.git.stefan@agner.ch>
-In-Reply-To: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-References: <3553f8a938dbb498aa1846a37ea343b7f53739da.1676488094.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 10 May 2022 22:57:26 +0200
-Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
-
-Enable Bluetooth support via UART0. Use the existing bindings
-for Realtek rtl8723bs Bluetooth device.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm/boot/dts/rk3288-tinker.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
-index c7e79e594720..5d261fae6e72 100644
---- a/arch/arm/boot/dts/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
-@@ -386,6 +386,20 @@ bl_en: bl-en {
- 		};
- 	};
- 
-+	bluetooth {
-+		bt_enable_pin: bt-enable-pin {
-+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_device_wake_pin: bt-device-wake-pin {
-+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_host_wake_pin: bt-host-wake-pin {
-+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	buttons {
- 		pwrbtn: pwrbtn {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -518,6 +532,18 @@ &tsadc {
- 
- &uart0 {
- 	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+	uart-has-rtscts;
-+
-+	bluetooth {
-+		compatible = "realtek,rtl8723bs-bt";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
-+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-+		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &uart1 {
--- 
-2.39.1
-

buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch

@@ -1,19 +0,0 @@
-diff --git a/sound/usb/card.c b/sound/usb/card.c
-index 2bfe4e80a..cea93aaf5 100644
---- a/sound/usb/card.c
-+++ b/sound/usb/card.c
-@@ -382,6 +382,14 @@ static void usb_audio_make_shortname(struct usb_device *dev,
- 	}
- 
- 	strim(card->shortname);
-+
-+	/* Tinker Board ALC4040 CODEC	*/
-+
-+	if(USB_ID_VENDOR(chip->usb_id) == 0x0bda &&
-+		USB_ID_PRODUCT(chip->usb_id) == 0x481a) {
-+			strlcat(card->shortname, " OnBoard", sizeof(card->shortname));
-+	}
-+	
- }
- 
- static void usb_audio_make_longname(struct usb_device *dev,

buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch

@@ -1,37 +0,0 @@
-From 966cd1782632bc8279667955ec315e93c89495e6 Mon Sep 17 00:00:00 2001
-Message-Id: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 12:41:50 +0000
-Subject: [PATCH 1/2] SPL: modify load address of U-Boot
-
-Default load address of U-Boot is at sector 16384, which is where HAOS
-has its first partition. Use 0x2000 (8192) instead.
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- configs/tinker-rk3288_defconfig   | 1 +
- configs/tinker-s-rk3288_defconfig | 1 +
- 2 files changed, 2 insertions(+)
-
-diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
-index a9c9a122f6..b839fdb570 100644
---- a/configs/tinker-rk3288_defconfig
-+++ b/configs/tinker-rk3288_defconfig
-@@ -92,3 +92,4 @@ CONFIG_VIDEO_ROCKCHIP=y
- CONFIG_DISPLAY_ROCKCHIP_HDMI=y
- CONFIG_CMD_DHRYSTONE=y
- CONFIG_ERRNO_STR=y
-+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
-diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
-index f367c9370f..c52b0753ec 100644
---- a/configs/tinker-s-rk3288_defconfig
-+++ b/configs/tinker-s-rk3288_defconfig
-@@ -94,3 +94,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
- CONFIG_CONSOLE_SCROLL_LINES=10
- CONFIG_CMD_DHRYSTONE=y
- CONFIG_ERRNO_STR=y
-+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
--- 
-2.35.1
-

buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch

@@ -1,68 +0,0 @@
-From 98674c65a6595e7ac554f7ec9d6f0228556756f6 Mon Sep 17 00:00:00 2001
-Message-Id: <98674c65a6595e7ac554f7ec9d6f0228556756f6.1645627366.git.stefan@agner.ch>
-In-Reply-To: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
-References: <966cd1782632bc8279667955ec315e93c89495e6.1645627366.git.stefan@agner.ch>
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
----
- board/rockchip/tinker_rk3288/tinker-rk3288.c | 37 ++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-index f85209c649..6fa1bb0c66 100644
---- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
-+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-@@ -13,6 +13,7 @@
- #include <netdev.h>
- #include <asm/arch-rockchip/bootrom.h>
- #include <asm/io.h>
-+#include <power/regulator.h>
- 
- static int get_ethaddr_from_eeprom(u8 *addr)
- {
-@@ -48,3 +49,39 @@ int mmc_get_env_dev(void)
- 
- 	return 1;
- }
-+
-+
-+#ifdef CONFIG_DM_PMIC
-+static int rockchip_set_regulator_on(const char *name, uint uv)
-+{
-+	struct udevice *dev;
-+	int ret;
-+
-+	ret = regulator_get_by_platname(name, &dev);
-+	if (ret) {
-+		debug("%s: Cannot find regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_value(dev, uv);
-+	if (ret) {
-+		debug("%s: Cannot set regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_enable(dev, 1);
-+	if (ret) {
-+		debug("%s: Cannot enable regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+int power_init_board(void)
-+{
-+	int ret = rockchip_set_regulator_on("vcc33_mipi", 3300000);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+#endif
--- 
-2.35.1
-

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -1,99 +0,0 @@
-
-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-if test "$devnum" = "0"; then
-  setenv fdtfile "rk3288-tinker-s.dtb"
-else
-  setenv fdtfile "rk3288-tinker.dtb"
-fi
-
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/asus/tinker/uboot.config

@@ -1,3 +0,0 @@
-# CONFIG_USB_STORAGE is not set
-# CONFIG_DOS_PARTITION is not set
-CONFIG_OF_LIBFDT_OVERLAY=y

buildroot-external/board/hardkernel/odroid-c2/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c2/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
-    local UBOOT_GXBB="${BINARIES_DIR}/u-boot.gxbb"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=1 count=440
-    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=512 skip=1 seek=1
-    dd if="${UBOOT_GXBB}" of="${SPL_IMG}" conv=notrunc bs=512 seek=97
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-c2/meta

@@ -1,12 +0,0 @@
-BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel ODROID-C2"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=mbr
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c2
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -1,107 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-gxbb-odroidc2.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-c2/uboot.config

@@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y

buildroot-external/board/hardkernel/odroid-c4/boot-env.txt

@@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod

buildroot-external/board/hardkernel/odroid-c4/cmdline.txt

@@ -1 +0,0 @@
-console=tty0 console=ttyAML0,115200n8

buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh

@@ -1,26 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local UBOOT_SM1="${BINARIES_DIR}/u-boot.sm1"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${UBOOT_SM1}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}

buildroot-external/board/hardkernel/odroid-c4/meta

@@ -1,12 +0,0 @@
-BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel ODROID-C4"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=mbr
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c4
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -1,107 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-sm1-odroid-c4.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset

buildroot-external/board/hardkernel/odroid-c4/uboot.config

@@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y

buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh

@@ -1,25 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local SPL_IMG="$(path_spl_img)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-
-    # SPL
-    create_spl_image
-
-    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
-    dd if="${BINARIES_DIR}/u-boot.itb" of="${SPL_IMG}" conv=notrunc bs=512 seek=16384
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-

buildroot-external/board/hardkernel/odroid-m1/kernel.config

@@ -1,11 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-
-# CONFIG_DW_WATCHDOG is not set

buildroot-external/board/hardkernel/odroid-m1/meta

@@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1
-BOARD_NAME="Hardkernel ODROID-M1"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-BOOT_SYS=gpt
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0001-arm64-dts-rockchip-Add-Hardkernel-ODROID-M1-board.patch

@@ -1,455 +0,0 @@
-From d388735d551e09b00317a509859fca51776b9826 Mon Sep 17 00:00:00 2001
-Message-ID: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Dongjin Kim <tobetter@gmail.com>
-Date: Fri, 30 Sep 2022 07:12:35 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
-
-This patch is to add a device tree for new board Hardkernel ODROID-M1
-based on Rockchip RK3568, includes basic peripherals -
-uart/eMMC/uSD/i2c and on-board ethernet.
-
-Signed-off-by: Dongjin Kim <tobetter@gmail.com>
-[aurelien@aurel32.net: addressed issues from initial review]
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile         |   1 +
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 414 ++++++++++++++++++
- 2 files changed, 415 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-
-diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
-index 8c15593c0ca4..5dc1607b3ecf 100644
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -71,4 +71,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-new file mode 100644
-index 000000000000..b3016437640b
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -0,0 +1,414 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		#clock-cells = <1>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>;
-+		rockchip,system-power-controller;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pinctrl {
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0002-arm64-dts-rockchip-add-thermal-support-to-ODROID-M1.patch

@@ -1,38 +0,0 @@
-From 24048c1753916bd983746542b16d19d2b399eeb7 Mon Sep 17 00:00:00 2001
-Message-ID: <24048c1753916bd983746542b16d19d2b399eeb7.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:36 +0200
-Subject: [PATCH] arm64: dts: rockchip: add thermal support to ODROID-M1
-
-Add the thermal nodes for the ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-4-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index b3016437640b..112c65af3f55 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -409,6 +409,12 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
- &uart2 {
- 	status = "okay";
- };
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0003-arm64-dts-rockchip-Add-NOR-flash-to-ODROID-M1.patch

@@ -1,103 +0,0 @@
-From 982bb2beab8e38a7c0a365770be2ad9c5221a650 Mon Sep 17 00:00:00 2001
-Message-ID: <982bb2beab8e38a7c0a365770be2ad9c5221a650.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:37 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add NOR flash to ODROID-M1
-
-Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add
-the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode
-and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn
-pin.
-
-The partitions addresses and sizes are taken from the ODROID-M1
-Partition Table page on the ODROID wiki.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-5-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 58 +++++++++++++++++++
- 1 file changed, 58 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 112c65af3f55..94e839c9afab 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -351,6 +351,20 @@ rgmii_phy0: ethernet-phy@0 {
- };
- 
- &pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-@@ -409,6 +423,50 @@ &sdmmc0 {
- 	status = "okay";
- };
- 
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>;
- 	rockchip,hw-tshut-polarity = <0>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0004-arm64-dts-rockchip-Add-analog-audio-on-ODROID-M1.patch

@@ -1,102 +0,0 @@
-From ae25f92a09abb7dd16a9ad3b74e0c105b385f214 Mon Sep 17 00:00:00 2001
-Message-ID: <ae25f92a09abb7dd16a9ad3b74e0c105b385f214.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:38 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add analog audio on ODROID-M1
-
-On the ODROID-M1, the I2S1 TDM controller is connected to the rk809
-codec in I2S mode. It is used to provide a stereo headphones output and
-a mono speaker output. A GPIO with an external pullup is used as an
-headphone detection input.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-6-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 43 ++++++++++++++++++-
- 1 file changed, 42 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 94e839c9afab..634c1bd80b4e 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -59,6 +59,31 @@ led_work: led-1 {
- 		};
- 	};
- 
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -131,10 +156,15 @@ rk809: pmic@20 {
- 		reg = <0x20>;
- 		interrupt-parent = <&gpio0>;
- 		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
- 		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
- 		pinctrl-names = "default";
--		pinctrl-0 = <&pmic_int_l>;
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
- 		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
- 		vcc1-supply = <&vcc3v3_sys>;
- 		vcc2-supply = <&vcc3v3_sys>;
- 		vcc3-supply = <&vcc3v3_sys>;
-@@ -340,6 +370,11 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
- &mdio0 {
- 	rgmii_phy0: ethernet-phy@0 {
- 		compatible = "ethernet-phy-ieee802.3-c22";
-@@ -379,6 +414,12 @@ pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- 		};
- 	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0005-arm64-dts-rockchip-Enable-vop2-and-hdmi-tx-on-ODROID.patch

@@ -1,97 +0,0 @@
-From 3a1be3d8719ef6335385d4e5e456371e7bf7383f Mon Sep 17 00:00:00 2001
-Message-ID: <3a1be3d8719ef6335385d4e5e456371e7bf7383f.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:39 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1
-
-Enable the RK356x Video Output Processor (VOP) 2 on ODROID M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-7-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 634c1bd80b4e..126b893048fe 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -8,6 +8,7 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/leds/common.h>
- #include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
- #include "rk3568.dtsi"
- 
- / {
-@@ -37,6 +38,17 @@ dc_12v: dc-12v-regulator {
- 		regulator-max-microvolt = <12000000>;
- 	};
- 
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -131,6 +143,24 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -517,3 +547,20 @@ &tsadc {
- &uart2 {
- 	status = "okay";
- };
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0006-arm64-dts-rockchip-Enable-HDMI-audio-on-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From ded87dc761951205b8b9ba8ee4081e28a850a3db Mon Sep 17 00:00:00 2001
-Message-ID: <ded87dc761951205b8b9ba8ee4081e28a850a3db.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:40 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable HDMI audio on ODROID-M1.
-
-This enables the i2s0 controller and the hdmi-sound node on the
-ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-8-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 126b893048fe..ac4e94d18feb 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -161,6 +161,10 @@ hdmi_out_con: endpoint {
- 	};
- };
- 
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
- &i2c0 {
- 	status = "okay";
- 
-@@ -400,6 +404,10 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
- &i2s1_8ch {
- 	rockchip,trcm-sync-tx-only;
- 	status = "okay";
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0007-arm64-dts-rockchip-Enable-the-GPU-on-ODROID-M1.patch

@@ -1,37 +0,0 @@
-From 13438a717627cae086cc3a1126552cffa2f4bd16 Mon Sep 17 00:00:00 2001
-Message-ID: <13438a717627cae086cc3a1126552cffa2f4bd16.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:41 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the GPU on ODROID-M1
-
-Enable the GPU core on the Rockchip RK3568 ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-9-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index ac4e94d18feb..e4b7699d3eea 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -143,6 +143,11 @@ &gmac0_rgmii_clk
- 	rx_delay = <0x2d>;
- };
- 
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
- &hdmi {
- 	avdd-0v9-supply = <&vdda0v9_image>;
- 	avdd-1v8-supply = <&vcca1v8_image>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0008-arm64-dts-rockchip-Enable-the-USB-2.0-ports-on-ODROI.patch

@@ -1,111 +0,0 @@
-From 0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c Mon Sep 17 00:00:00 2001
-Message-ID: <0f0a85a289b4d0fbd5c39eb5ddbb681a37ad490c.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:42 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
-providing one host-only port and one OTG port. On the ODROID-M1, they
-are both used in host mode. The USB ports are powered by a DC/DC
-converter providing 5V and named VCC5V0_SYS on the schematics, followed
-by a power switch.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index e4b7699d3eea..2e4cc20bd676 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -105,6 +105,28 @@ vcc3v3_sys: vcc3v3-sys-regulator {
- 		regulator-max-microvolt = <3300000>;
- 		vin-supply = <&dc_12v>;
- 	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
- };
- 
- &cpu0 {
-@@ -463,6 +485,15 @@ hp_det_pin: hp-det-pin {
- 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &pmu_io_domains {
-@@ -561,6 +592,36 @@ &uart2 {
- 	status = "okay";
- };
- 
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
- &vop {
- 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0009-arm64-dts-rockchip-Enable-the-USB-3.0-ports-on-ODROI.patch

@@ -1,114 +0,0 @@
-From d8abc451c669a8fd36b31db5cb96ec49da819124 Mon Sep 17 00:00:00 2001
-Message-ID: <d8abc451c669a8fd36b31db5cb96ec49da819124.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:43 +0200
-Subject: [PATCH] arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1
-
-The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals
-are connected to a PHY providing one host-only port and one OTG port.
-The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY.
-
-The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals
-connected to the two combo PHYs. For the USB 2.0 signals, one connector
-is connected to the host-only PHY and uses the same power switch as the
-USB 2.0 ports. The other connector has its own power switch and is
-connected to the OTG PHY, which is also connected to a device only
-micro-USB connector. The purpose of this micro-USB connector is for
-firmware update using the Rockusb vendor specific USB class. Therefore
-it does not make sense to enable this port on Linux, and the PHY is
-forced to host mode.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-11-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 49 ++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2e4cc20bd676..9a84a7e76d7a 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -127,6 +127,30 @@ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
- 		regulator-max-microvolt = <5000000>;
- 		vin-supply = <&vcc5v0_sys>;
- 	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
- };
- 
- &cpu0 {
-@@ -490,7 +514,7 @@ usb {
- 		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
- 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
--		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- 		};
- 	};
-@@ -600,6 +624,11 @@ &usb_host0_ohci {
- 	status = "okay";
- };
- 
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
- &usb_host1_ehci {
- 	status = "okay";
- };
-@@ -608,6 +637,24 @@ &usb_host1_ohci {
- 	status = "okay";
- };
- 
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
- &usb2phy1 {
- 	status = "okay";
- };
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0010-arm64-dts-rockchip-Add-SATA-support-to-ODROID-M1.patch

@@ -1,48 +0,0 @@
-From 2f6d4521403932ca22cb4dabef9033f1d52232ba Mon Sep 17 00:00:00 2001
-Message-ID: <2f6d4521403932ca22cb4dabef9033f1d52232ba.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:44 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add SATA support to ODROID-M1
-
-Enable the Combo PHY and SATA nodes in ODROID-M1.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-12-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 9a84a7e76d7a..bd24ccf94e76 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -153,6 +153,11 @@ &combphy1 {
- 	status = "okay";
- };
- 
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vdd_cpu>;
- };
-@@ -538,6 +543,10 @@ &saradc {
- 	status = "okay";
- };
- 
-+&sata2 {
-+	status = "okay";
-+};
-+
- &sdhci {
- 	bus-width = <8>;
- 	max-frequency = <200000000>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0011-arm64-dts-rockchip-Add-PCIEe-v3-nodes-to-ODROID-M1.patch

@@ -1,80 +0,0 @@
-From 1572a9c5d9fa9f654fbc1909528ae5940ad34aa3 Mon Sep 17 00:00:00 2001
-Message-ID: <1572a9c5d9fa9f654fbc1909528ae5940ad34aa3.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:45 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1
-
-Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-13-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 34 +++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index bd24ccf94e76..2f685c606bb9 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -96,6 +96,19 @@ simple-audio-card,codec {
- 		};
- 	};
- 
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
- 	vcc3v3_sys: vcc3v3-sys-regulator {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc3v3_sys";
-@@ -479,6 +492,18 @@ rgmii_phy0: ethernet-phy@0 {
- 	};
- };
- 
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
- &pinctrl {
- 	fspi {
- 		fspi_dual_io_pins: fspi-dual-io-pins {
-@@ -503,6 +528,15 @@ led_work_pin: led-work-pin {
- 		};
- 	};
- 
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	pmic {
- 		pmic_int_l: pmic-int-l {
- 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/linux/0012-arm64-dts-rockchip-Add-IR-receiver-node-to-ODROID-M1.patch

@@ -1,54 +0,0 @@
-From b2eae73eeb32dd9383571de6af18fc8bd39aac3a Mon Sep 17 00:00:00 2001
-Message-ID: <b2eae73eeb32dd9383571de6af18fc8bd39aac3a.1688490481.git.stefan@agner.ch>
-In-Reply-To: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-References: <d388735d551e09b00317a509859fca51776b9826.1688490481.git.stefan@agner.ch>
-From: Aurelien Jarno <aurelien@aurel32.net>
-Date: Fri, 30 Sep 2022 07:12:46 +0200
-Subject: [PATCH] arm64: dts: rockchip: Add IR receiver node to ODROID-M1
-
-Add the infrared receiver and its associated pinctrl entry. Note that
-there is an external pullup to VCC3V3_SYS.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
-Tested-by: Dan Johansen <strit@manjaro.org>
-Link: https://lore.kernel.org/r/20220930051246.391614-14-aurelien@aurel32.net
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-index 2f685c606bb9..59ecf868dbd0 100644
---- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
-@@ -49,6 +49,13 @@ hdmi_con_in: endpoint {
- 		};
- 	};
- 
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -519,6 +526,13 @@ fspi_dual_io_pins: fspi-dual-io-pins {
- 		};
- 	};
- 
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	leds {
- 		led_power_pin: led-power-pin {
- 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0001-ata-dwc_ahci-Fix-support-for-other-platforms.patch

@@ -1,48 +0,0 @@
-From acadbae38f91965f204d6a5d49eb8b578970b818 Mon Sep 17 00:00:00 2001
-Message-ID: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
-From: Jonas Karlman <jonas@kwiboo.se>
-Date: Sun, 2 Jul 2023 20:47:17 +0000
-Subject: [PATCH] ata: dwc_ahci: Fix support for other platforms
-
-The dwc_ahci driver use platform specific defines, place the platform
-specific code behind a ifdef CONFIG_ARCH_OMAP2PLUS to allow build and
-use of the driver on Rockchip platform.
-
-Fixes: 02a4b4297901 ("drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device")
-Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
----
- drivers/ata/dwc_ahci.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
-index 826fea71cc..1dc91e7fce 100644
---- a/drivers/ata/dwc_ahci.c
-+++ b/drivers/ata/dwc_ahci.c
-@@ -13,7 +13,9 @@
- #include <ahci.h>
- #include <scsi.h>
- #include <sata.h>
-+#ifdef CONFIG_ARCH_OMAP2PLUS
- #include <asm/arch/sata.h>
-+#endif
- #include <asm/io.h>
- #include <generic-phy.h>
- 
-@@ -72,12 +74,14 @@ static int dwc_ahci_probe(struct udevice *dev)
- 		return ret;
- 	}
- 
-+#ifdef CONFIG_ARCH_OMAP2PLUS
- 	if (priv->wrapper_base) {
- 		u32 val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
- 
- 		/* Enable SATA module, No Idle, No Standby */
- 		writel(val, priv->wrapper_base + TI_SATA_SYSCONFIG);
- 	}
-+#endif
- 
- 	return ahci_probe_scsi(dev, (ulong)priv->base);
- }
--- 
-2.41.0
-

buildroot-external/board/hardkernel/odroid-m1/patches/uboot/0002-board-rockchip-Add-Hardkernel-ODROID-M1.patch

@@ -1,990 +0,0 @@
-From e52e7ff196b942c8bf8bee9e74d4f24619934a1b Mon Sep 17 00:00:00 2001
-Message-ID: <e52e7ff196b942c8bf8bee9e74d4f24619934a1b.1689147150.git.stefan@agner.ch>
-In-Reply-To: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
-References: <acadbae38f91965f204d6a5d49eb8b578970b818.1689147150.git.stefan@agner.ch>
-From: Jonas Karlman <jonas@kwiboo.se>
-Date: Sun, 2 Jul 2023 20:47:19 +0000
-Subject: [PATCH] board: rockchip: Add Hardkernel ODROID-M1
-
-Hardkernel ODROID-M1 is a single board computer with a RK3568B2 SoC,
-a slightly modified version of the RK3568 SoC.
-
-Features tested on a ODROID-M1 8GB v1.0 2022-06-13:
-- SD-card boot
-- eMMC boot
-- SPI Flash boot
-- PCIe/NVMe/AHCI
-- SATA port
-- USB host
-
-Device tree is imported from linux v6.4.
-
-Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
----
- arch/arm/dts/Makefile                     |   1 +
- arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi |  46 ++
- arch/arm/dts/rk3568-odroid-m1.dts         | 744 ++++++++++++++++++++++
- board/rockchip/evb_rk3568/MAINTAINERS     |   7 +
- configs/odroid-m1-rk3568_defconfig        | 103 +++
- doc/board/rockchip/rockchip.rst           |   1 +
- 6 files changed, 902 insertions(+)
- create mode 100644 arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
- create mode 100644 arch/arm/dts/rk3568-odroid-m1.dts
- create mode 100644 configs/odroid-m1-rk3568_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 480269fa60..334c1bafda 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -169,6 +169,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
- 	rk3566-anbernic-rgxx3.dtb \
- 	rk3566-radxa-cm3-io.dtb \
- 	rk3568-evb.dtb \
-+	rk3568-odroid-m1.dtb \
- 	rk3568-rock-3a.dtb
- 
- dtb-$(CONFIG_ROCKCHIP_RK3588) += \
-diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-new file mode 100644
-index 0000000000..dc8ad98715
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-@@ -0,0 +1,46 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+#include "rk356x-u-boot.dtsi"
-+
-+/ {
-+	aliases {
-+		spi0 = &sfc;
-+	};
-+
-+	chosen {
-+		stdout-path = &uart2;
-+	};
-+};
-+
-+&fspi_dual_io_pins {
-+	bootph-all;
-+};
-+
-+&sdhci {
-+	cap-mmc-highspeed;
-+	mmc-ddr-1_8v;
-+	mmc-hs200-1_8v;
-+	mmc-hs400-1_8v;
-+	mmc-hs400-enhanced-strobe;
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
-+};
-+
-+&sfc {
-+	bootph-pre-ram;
-+	u-boot,spl-sfc-no-dma;
-+
-+	flash@0 {
-+		bootph-pre-ram;
-+	};
-+};
-+
-+&uart2 {
-+	bootph-all;
-+	clock-frequency = <24000000>;
-+	status = "okay";
-+};
-+
-+&vcc5v0_usb_host {
-+	/* Workaround until regulator implement basic reference counter */
-+	regulator-always-on;
-+};
-diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
-new file mode 100644
-index 0000000000..59ecf868db
---- /dev/null
-+++ b/arch/arm/dts/rk3568-odroid-m1.dts
-@@ -0,0 +1,744 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Hardkernel Co., Ltd.
-+ *
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+	model = "Hardkernel ODROID-M1";
-+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
-+
-+	aliases {
-+		ethernet0 = &gmac0;
-+		i2c0 = &i2c3;
-+		i2c3 = &i2c0;
-+		mmc0 = &sdhci;
-+		mmc1 = &sdmmc0;
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	dc_12v: dc-12v-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "dc_12v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <12000000>;
-+		regulator-max-microvolt = <12000000>;
-+	};
-+
-+	hdmi-con {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	ir-receiver {
-+		compatible = "gpio-ir-receiver";
-+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ir_receiver_pin>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_power: led-0 {
-+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_RED>;
-+			default-state = "keep";
-+			linux,default-trigger = "default-on";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_power_pin>;
-+		};
-+		led_work: led-1 {
-+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_BLUE>;
-+			linux,default-trigger = "heartbeat";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&led_work_pin>;
-+		};
-+	};
-+
-+	rk809-sound {
-+		compatible = "simple-audio-card";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&hp_det_pin>;
-+		simple-audio-card,name = "Analog RK817";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-+		simple-audio-card,mclk-fs = <256>;
-+		simple-audio-card,widgets =
-+			"Headphone", "Headphones",
-+			"Speaker", "Speaker";
-+		simple-audio-card,routing =
-+			"Headphones", "HPOL",
-+			"Headphones", "HPOR",
-+			"Speaker", "SPKO";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&i2s1_8ch>;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&rk809>;
-+		};
-+	};
-+
-+	vcc3v3_pcie: vcc3v3-pcie-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_pcie";
-+		enable-active-high;
-+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <5000>;
-+		vin-supply = <&vcc3v3_sys>;
-+	};
-+
-+	vcc3v3_sys: vcc3v3-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_sys: vcc5v0-sys-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_sys";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&dc_12v>;
-+	};
-+
-+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_host";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+
-+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc5v0_usb_otg";
-+		enable-active-high;
-+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		vin-supply = <&vcc5v0_sys>;
-+	};
-+};
-+
-+&combphy0 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&combphy1 {
-+	/* Used for USB3 */
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&combphy2 {
-+	/* used for SATA */
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-+	assigned-clock-rates = <0>, <125000000>;
-+	clock_in_out = "output";
-+	phy-handle = <&rgmii_phy0>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc3v3_sys>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac0_miim
-+		     &gmac0_tx_bus2
-+		     &gmac0_rx_bus2
-+		     &gmac0_rgmii_clk
-+		     &gmac0_rgmii_bus>;
-+	status = "okay";
-+
-+	tx_delay = <0x4f>;
-+	rx_delay = <0x2d>;
-+};
-+
-+&gpu {
-+	mali-supply = <&vdd_gpu>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	avdd-0v9-supply = <&vdda0v9_image>;
-+	avdd-1v8-supply = <&vcca1v8_image>;
-+	status = "okay";
-+};
-+
-+&hdmi_in {
-+	hdmi_in_vp0: endpoint {
-+		remote-endpoint = <&vp0_out_hdmi>;
-+	};
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&hdmi_sound {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	vdd_cpu: regulator@1c {
-+		compatible = "tcs,tcs4525";
-+		reg = <0x1c>;
-+		fcs,suspend-voltage-selector = <1>;
-+		regulator-name = "vdd_cpu";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <800000>;
-+		regulator-max-microvolt = <1150000>;
-+		regulator-ramp-delay = <2300>;
-+		vin-supply = <&vcc3v3_sys>;
-+
-+		regulator-state-mem {
-+			regulator-off-in-suspend;
-+		};
-+	};
-+
-+	rk809: pmic@20 {
-+		compatible = "rockchip,rk809";
-+		reg = <0x20>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
-+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
-+		#clock-cells = <1>;
-+		clock-names = "mclk";
-+		clocks = <&cru I2S1_MCLKOUT_TX>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
-+		rockchip,system-power-controller;
-+		#sound-dai-cells = <0>;
-+		vcc1-supply = <&vcc3v3_sys>;
-+		vcc2-supply = <&vcc3v3_sys>;
-+		vcc3-supply = <&vcc3v3_sys>;
-+		vcc4-supply = <&vcc3v3_sys>;
-+		vcc5-supply = <&vcc3v3_sys>;
-+		vcc6-supply = <&vcc3v3_sys>;
-+		vcc7-supply = <&vcc3v3_sys>;
-+		vcc8-supply = <&vcc3v3_sys>;
-+		vcc9-supply = <&vcc3v3_sys>;
-+		wakeup-source;
-+
-+		regulators {
-+			vdd_logic: DCDC_REG1 {
-+				regulator-name = "vdd_logic";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdd_gpu: DCDC_REG2 {
-+				regulator-name = "vdd_gpu";
-+				regulator-always-on;
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-initial-mode = <0x2>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vdd_npu: DCDC_REG4 {
-+				regulator-name = "vdd_npu";
-+				regulator-init-microvolt = <900000>;
-+				regulator-initial-mode = <0x2>;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1350000>;
-+				regulator-ramp-delay = <6001>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_1v8: DCDC_REG5 {
-+				regulator-name = "vcc_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_image: LDO_REG1 {
-+				regulator-name = "vdda0v9_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda_0v9: LDO_REG2 {
-+				regulator-name = "vdda_0v9";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vdda0v9_pmu: LDO_REG3 {
-+				regulator-name = "vdda0v9_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <900000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <900000>;
-+				};
-+			};
-+
-+			vccio_acodec: LDO_REG4 {
-+				regulator-name = "vccio_acodec";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vccio_sd: LDO_REG5 {
-+				regulator-name = "vccio_sd";
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_pmu: LDO_REG6 {
-+				regulator-name = "vcc3v3_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcca_1v8: LDO_REG7 {
-+				regulator-name = "vcca_1v8";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcca1v8_pmu: LDO_REG8 {
-+				regulator-name = "vcca1v8_pmu";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcca1v8_image: LDO_REG9 {
-+				regulator-name = "vcca1v8_image";
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc_3v3: SWITCH_REG1 {
-+				regulator-name = "vcc_3v3";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+
-+			vcc3v3_sd: SWITCH_REG2 {
-+				regulator-name = "vcc3v3_sd";
-+
-+				regulator-state-mem {
-+					regulator-off-in-suspend;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&i2s0_8ch {
-+	status = "okay";
-+};
-+
-+&i2s1_8ch {
-+	rockchip,trcm-sync-tx-only;
-+	status = "okay";
-+};
-+
-+&mdio0 {
-+	rgmii_phy0: ethernet-phy@0 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <0x0>;
-+		reset-assert-us = <20000>;
-+		reset-deassert-us = <100000>;
-+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-+	};
-+};
-+
-+&pcie30phy {
-+	status = "okay";
-+};
-+
-+&pcie3x2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_reset_pin>;
-+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+	vpcie3v3-supply = <&vcc3v3_pcie>;
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	fspi {
-+		fspi_dual_io_pins: fspi-dual-io-pins {
-+			rockchip,pins =
-+				/* fspi_clk */
-+				<1 RK_PD0 1 &pcfg_pull_none>,
-+				/* fspi_cs0n */
-+				<1 RK_PD3 1 &pcfg_pull_none>,
-+				/* fspi_d0 */
-+				<1 RK_PD1 1 &pcfg_pull_none>,
-+				/* fspi_d1 */
-+				<1 RK_PD2 1 &pcfg_pull_none>;
-+		};
-+	};
-+
-+	ir-receiver {
-+		ir_receiver_pin: ir-receiver-pin {
-+			/* external pullup to VCC3V3_SYS */
-+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	leds {
-+		led_power_pin: led-power-pin {
-+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		led_work_pin: led-work-pin {
-+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pcie {
-+		pcie_reset_pin: pcie-reset-pin {
-+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
-+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+
-+	rk809 {
-+		hp_det_pin: hp-det-pin {
-+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	usb {
-+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
-+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
-+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+};
-+
-+&pmu_io_domains {
-+	pmuio1-supply = <&vcc3v3_pmu>;
-+	pmuio2-supply = <&vcc3v3_pmu>;
-+	vccio1-supply = <&vccio_acodec>;
-+	vccio2-supply = <&vcc_1v8>;
-+	vccio3-supply = <&vccio_sd>;
-+	vccio4-supply = <&vcc_1v8>;
-+	vccio5-supply = <&vcc_3v3>;
-+	vccio6-supply = <&vcc_3v3>;
-+	vccio7-supply = <&vcc_3v3>;
-+	status = "okay";
-+};
-+
-+&saradc {
-+	vref-supply = <&vcca_1v8>;
-+	status = "okay";
-+};
-+
-+&sata2 {
-+	status = "okay";
-+};
-+
-+&sdhci {
-+	bus-width = <8>;
-+	max-frequency = <200000000>;
-+	non-removable;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
-+	vmmc-supply = <&vcc_3v3>;
-+	vqmmc-supply = <&vcc_1v8>;
-+	status = "okay";
-+};
-+
-+&sdmmc0 {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+	sd-uhs-sdr50;
-+	vmmc-supply = <&vcc3v3_sd>;
-+	vqmmc-supply = <&vccio_sd>;
-+	status = "okay";
-+};
-+
-+&sfc {
-+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
-+	pinctrl-0 = <&fspi_dual_io_pins>;
-+	pinctrl-names = "default";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <100000000>;
-+		spi-rx-bus-width = <2>;
-+		spi-tx-bus-width = <1>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "SPL";
-+				reg = <0x0 0xe0000>;
-+			};
-+			partition@e0000 {
-+				label = "U-Boot Env";
-+				reg = <0xe0000 0x20000>;
-+			};
-+			partition@100000 {
-+				label = "U-Boot";
-+				reg = <0x100000 0x200000>;
-+			};
-+			partition@300000 {
-+				label = "splash";
-+				reg = <0x300000 0x100000>;
-+			};
-+			partition@400000 {
-+				label = "Filesystem";
-+				reg = <0x400000 0xc00000>;
-+			};
-+		};
-+	};
-+};
-+
-+&tsadc {
-+	rockchip,hw-tshut-mode = <1>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+	status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+	status = "okay";
-+};
-+
-+&usb2phy0 {
-+	status = "okay";
-+};
-+
-+&usb2phy0_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+	phy-supply = <&vcc5v0_usb_otg>;
-+	status = "okay";
-+};
-+
-+&usb2phy1 {
-+	status = "okay";
-+};
-+
-+&usb2phy1_host {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+	phy-supply = <&vcc5v0_usb_host>;
-+	status = "okay";
-+};
-+
-+&vop {
-+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+	status = "okay";
-+};
-+
-+&vop_mmu {
-+	status = "okay";
-+};
-+
-+&vp0 {
-+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+		remote-endpoint = <&hdmi_in_vp0>;
-+	};
-+};
-diff --git a/board/rockchip/evb_rk3568/MAINTAINERS b/board/rockchip/evb_rk3568/MAINTAINERS
-index 6b2e7c7575..a5b59da0f7 100644
---- a/board/rockchip/evb_rk3568/MAINTAINERS
-+++ b/board/rockchip/evb_rk3568/MAINTAINERS
-@@ -7,6 +7,13 @@ F:      configs/evb-rk3568_defconfig
- F:	arch/arm/dts/rk3568-evb-boot.dtsi
- F:	arch/arm/dts/rk3568-evb.dts
- 
-+ODROID-M1
-+M:	Jonas Karlman <jonas@kwiboo.se>
-+S:	Maintained
-+F:	configs/odroid-m1-rk3568_defconfig
-+F:	arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
-+F:	arch/arm/dts/rk3568-odroid-m1.dts
-+
- RADXA-CM3
- M:	Jagan Teki <jagan@amarulasolutions.com>
- S:	Maintained
-diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
-new file mode 100644
-index 0000000000..d090196219
---- /dev/null
-+++ b/configs/odroid-m1-rk3568_defconfig
-@@ -0,0 +1,103 @@
-+CONFIG_ARM=y
-+CONFIG_SKIP_LOWLEVEL_INIT=y
-+CONFIG_COUNTER_FREQUENCY=24000000
-+CONFIG_ARCH_ROCKCHIP=y
-+CONFIG_TEXT_BASE=0x00a00000
-+CONFIG_SPL_LIBCOMMON_SUPPORT=y
-+CONFIG_SPL_LIBGENERIC_SUPPORT=y
-+CONFIG_NR_DRAM_BANKS=2
-+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-+CONFIG_SF_DEFAULT_SPEED=24000000
-+CONFIG_SF_DEFAULT_MODE=0x1000
-+CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
-+CONFIG_ROCKCHIP_RK3568=y
-+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-+CONFIG_ROCKCHIP_SPI_IMAGE=y
-+CONFIG_SPL_SERIAL=y
-+CONFIG_SPL_STACK_R_ADDR=0x600000
-+CONFIG_SPL_STACK=0x400000
-+CONFIG_DEBUG_UART_BASE=0xFE660000
-+CONFIG_DEBUG_UART_CLOCK=24000000
-+CONFIG_SPL_SPI_FLASH_SUPPORT=y
-+CONFIG_SPL_SPI=y
-+CONFIG_SYS_LOAD_ADDR=0xc00800
-+CONFIG_PCI=y
-+CONFIG_DEBUG_UART=y
-+CONFIG_AHCI=y
-+CONFIG_FIT=y
-+CONFIG_FIT_VERBOSE=y
-+CONFIG_SPL_FIT_SIGNATURE=y
-+CONFIG_SPL_LOAD_FIT=y
-+CONFIG_LEGACY_IMAGE_FORMAT=y
-+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
-+# CONFIG_DISPLAY_CPUINFO is not set
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+CONFIG_SPL_MAX_SIZE=0x40000
-+CONFIG_SPL_PAD_TO=0x7f8000
-+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-+CONFIG_SPL_BSS_START_ADDR=0x4000000
-+CONFIG_SPL_BSS_MAX_SIZE=0x4000
-+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-+CONFIG_SPL_STACK_R=y
-+CONFIG_SPL_SPI_LOAD=y
-+CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-+CONFIG_SPL_ATF=y
-+CONFIG_CMD_GPIO=y
-+CONFIG_CMD_GPT=y
-+CONFIG_CMD_I2C=y
-+CONFIG_CMD_MMC=y
-+CONFIG_CMD_PCI=y
-+CONFIG_CMD_USB=y
-+# CONFIG_CMD_SETEXPR is not set
-+CONFIG_CMD_PMIC=y
-+CONFIG_CMD_REGULATOR=y
-+# CONFIG_SPL_DOS_PARTITION is not set
-+CONFIG_SPL_OF_CONTROL=y
-+CONFIG_OF_LIVE=y
-+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-+CONFIG_SPL_REGMAP=y
-+CONFIG_SPL_SYSCON=y
-+CONFIG_AHCI_PCI=y
-+CONFIG_DWC_AHCI=y
-+CONFIG_SPL_CLK=y
-+CONFIG_ROCKCHIP_GPIO=y
-+CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_MISC=y
-+CONFIG_SUPPORT_EMMC_RPMB=y
-+CONFIG_MMC_DW=y
-+CONFIG_MMC_DW_ROCKCHIP=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_SDMA=y
-+CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-+CONFIG_SPI_FLASH_MACRONIX=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_GMAC_ROCKCHIP=y
-+CONFIG_NVME_PCI=y
-+CONFIG_PCIE_DW_ROCKCHIP=y
-+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
-+CONFIG_SPL_PINCTRL=y
-+CONFIG_DM_PMIC=y
-+CONFIG_PMIC_RK8XX=y
-+CONFIG_REGULATOR_RK8XX=y
-+CONFIG_PWM_ROCKCHIP=y
-+CONFIG_SPL_RAM=y
-+CONFIG_SCSI=y
-+CONFIG_DM_SCSI=y
-+CONFIG_BAUDRATE=1500000
-+CONFIG_DEBUG_UART_SHIFT=2
-+CONFIG_SYS_NS16550_MEM32=y
-+CONFIG_ROCKCHIP_SFC=y
-+CONFIG_SYSRESET=y
-+CONFIG_USB=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_GENERIC=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_OHCI_GENERIC=y
-+CONFIG_USB_DWC3=y
-+CONFIG_USB_DWC3_GENERIC=y
-+CONFIG_ERRNO_STR=y
-diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
-index 99376fb54c..b3de15b36a 100644
---- a/doc/board/rockchip/rockchip.rst
-+++ b/doc/board/rockchip/rockchip.rst
-@@ -95,6 +95,7 @@ List of mainline supported Rockchip boards:
- 
- * rk3568
-      - Rockchip Evb-RK3568 (evb-rk3568)
-+     - Hardkernel ODROID-M1 (odroid-m1-rk3568)
- 
- * rk3588
-      - Rockchip EVB (evb-rk3588)
--- 
-2.41.0
-