Update Hikvision camera list (#5635)

This commit is contained in:
Olaf van Zandwijk 2018-06-30 16:36:16 +02:00 committed by Fabian Affolter
parent 74d6bbec71
commit a340cb8cbc

View File

@ -18,7 +18,7 @@ The Hikvision Binary Sensor is a platform that parses the event stream of a [Hik
The platform will automatically add all sensors to Home Assistant that are configured within the camera/nvr interface to "Notify the surveillance center" as a trigger. If you would like to hide a sensor type you can do so by either unchecking "Notify the surveillance center" in the camera configuration or by using the "ignored" customize option detailed below.
<p class='note'>
In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section.
In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section.
</p>
For example, if you configure a camera with the name "Front Porch" that has motion detection and line crossing events enabled to notify the surveillance center the following binary sensors will be added to Home Assistant:
@ -44,6 +44,7 @@ This platform should work with all Hikvision cameras and nvrs, and has been conf
- DS-2CD2032-I
- DS-2CD2042WD-I
- DS-2CD2142FWD-I
- DS-2CD2155FWD-IS
To enable this sensor, the following lines are required in your `configuration.yaml` file: