* Improve handling of empty results from Rejseplanen (Fixes#25566)
* Exclude attributes with null value
* Add period back into docstring
* Fix formatting
* Add in a switch to control lights and sirens
* Improve the way sensors are updated
* fixes following flake8
* remove light platform, and fix breaking test.
* Resolve issues with tests
* add tests for the switch platform
* fix up flake8 errors
* fix the long strings
* fix naming on private method.
* updates following p/r
* further fixes following pr
* removed import
* add additional tests to improve code coverage
* forgot to check this in
* remove myself from CODEOWNDERS
Sorry, I do not have time right now to work on HomeAssistant, so I'm removing myself from the CODEOWNERS.
* Update manifest.json
* Improve and align Rejseplanen with other transport components (Breaking)
* Fix empty list check
* Remove pointless list cast
* Clean up redundant definition of transport types
* Add docstring
* Simplify _times check
* Log failures to load plaforms
* Drop unused exception variable
* Also load pip requirements with check config
* Fix lint
* More lint
* Drop invalid parameters for error call
* Fix Ecobee HVAC action + available presets
* Update python-ecobee-api to 0.0.21
* Include proper operation list.
* Allows pass on preset to set_climate_hold
* Remove aux heat as a preset
* Fix test
* Add some try excepts for velbus as the python-velbus lib is not good in handling these
* Only catch velbusExceptions
* only wrap the lines that can cause the exception
* Fix indentation mixup
* pylutron PyPI update
We've been working with the original maintainer of pylutron, and they've published an update to PyPI to support a couple different things: homeowner keypads, main repeater keypads
* added requirements
* Initial work on config_flow
* Finish config flow
* Pylint checks, make sure the import only happens once
* Added support for unloading, small fixes
* Check in the hassfest output files
* Flake8 fixes
* pylint mistake after flake8 fixes
* Work on comments
* Abort the import if it is already imported
* More comments resolved
* Added testcases for velbus config flow
* Fix pylint and flake8
* Added connection test to the config flow
* More sugestions
* renamed the abort reason
* excluded all but the config_flow.py from the velbus component in coveragerc
* Rewrote testcases with a patched version of _test_connection
* Docstyle fixes
* Updated the velbus testcases
* just yield
* flake8 fixes
* Add last_run_error boolean attribute to Switchbot entity to allow for trapping of errors
* Add last_run_success boolean attribute to Switchbot for error trapping
* Add last_run_success boolean attribute to Switchbot for error trapping
* Support multiple Elk instances
* Allow more than one Elk M1 alarm system to be integrated into a single hass instance.
* Introduces new "devices" schema at the top level, each of which has
the prior configuration schema.
* Requires new version of elkm1, 0.7.14, that gwww and I just updated (thanks Glen!)
QUESTION: Should the "devices" section be optional to avoid breaking
old configuration files? I chose not to do that for simplicity and
because I was following the doorbird code which requires the "devices"
section for all configurations even with only one device.
* Fixed a bunch of hound-raised issues
Fixed issues raised by hound -- there was clearly
a tool I was supposed to run to get those warnings
before submitting the PR. Sorry!
Updated REQUIREMENTS.
* Fixed whitespace and line-length mistakes
Also fixed unused prefix local variable lint warning.
* Fixed missing blank line
* Fixed more lint warnings.
Not sure if I missed these on the first pass or if the linter stopped
after a certain number of warnings or something else.
Switched logging to use %d and %s instead of string concatenation (per
lint request and because I imagine it migth be better performing
in some (oldish, I presume) implementations of python.
* Fixed typo in last commit.
* Eliminate devices subsection in config schema
This eliminates the breaking change for configurations wanting a
singleton elk m1 instance (the majority of users, no doubt). I did
not do it like this before because I was following the lead of the
doorbird component which introduced a devices: section when moving
to support multiple doorbells. But Rohan Kapoor kindly pointed me
at the zoneminder component which sets the other (IMO) preferable
precedent. Will update the docs change shortly.
* Call async_add_entities once for all the elk controllers.
Just move async_add_entities() outside of the loops across the elk m1
controllers, so it's called once for each platform.
* Call async_add_entities only once per platform.
Move it to after the loop, so it's called only once
per platform even when there are multiple elk m1 controllers.
* Various improvements to be more idiomatic python + bug fixes
Thanks to Martin Hjelmare for the careful review and suggestions.
(All mistaken improvements and new bugs are my own.)
* Removed semicolon that lint caught.
* Idiomatic python improvements
Use dict.values() (instead of making it easier to add local looping variable
on the keys by using _, bar = ...items())
Use [] when the key is known to exist.
* Support multiple Elk instances
* Allow more than one Elk M1 alarm system to be integrated into a single hass instance.
* Introduces new "devices" schema at the top level, each of which has
the prior configuration schema.
* Requires new version of elkm1, 0.7.14, that gwww and I just updated (thanks Glen!)
QUESTION: Should the "devices" section be optional to avoid breaking
old configuration files? I chose not to do that for simplicity and
because I was following the doorbird code which requires the "devices"
section for all configurations even with only one device.
* Fixed a bunch of hound-raised issues
Fixed issues raised by hound -- there was clearly
a tool I was supposed to run to get those warnings
before submitting the PR. Sorry!
Updated REQUIREMENTS.
* Fixed whitespace and line-length mistakes
Also fixed unused prefix local variable lint warning.
* Fixed missing blank line
* Fixed more lint warnings.
Not sure if I missed these on the first pass or if the linter stopped
after a certain number of warnings or something else.
Switched logging to use %d and %s instead of string concatenation (per
lint request and because I imagine it migth be better performing
in some (oldish, I presume) implementations of python.
* Fixed typo in last commit.
* Eliminate devices subsection in config schema
This eliminates the breaking change for configurations wanting a
singleton elk m1 instance (the majority of users, no doubt). I did
not do it like this before because I was following the lead of the
doorbird component which introduced a devices: section when moving
to support multiple doorbells. But Rohan Kapoor kindly pointed me
at the zoneminder component which sets the other (IMO) preferable
precedent. Will update the docs change shortly.
* Call async_add_entities once for all the elk controllers.
Just move async_add_entities() outside of the loops across the elk m1
controllers, so it's called once for each platform.
* Call async_add_entities only once per platform.
Move it to after the loop, so it's called only once
per platform even when there are multiple elk m1 controllers.
* Various improvements to be more idiomatic python + bug fixes
Thanks to Martin Hjelmare for the careful review and suggestions.
(All mistaken improvements and new bugs are my own.)
* Removed semicolon that lint caught.
* Idiomatic python improvements
Use dict.values() (instead of making it easier to add local looping variable
on the keys by using _, bar = ...items())
Use [] when the key is known to exist.
* Use dict[key] instead of .get (incl. fixing typo). Use .values() instead of .items() when ignoring keys.
* Gotta use devices.get(prefix) since we use no prefix for the singleton elk instance
* fix requirement to use newer elkm1 that supports my changes for multiple elk devices
* Removed spurious + between a string broken between two lines for formatting; was failing a lint check about logging needing to use %s
* Remove REQUIREMENTS and DEPENDENCIES since those are now taken care of by the manifest.json file.
* Add configuration check that the prefixes are all unique
* Use new dependency 'getmac' to get mac address of Elk M1 controllers and use that for uniqueid if possible, else use None. Also removed some procedural checking of unique prefix since that's now handled at schema check time.
* Whitespace changes to make style checker happy and code more consistent
* Removed unused variable, added blank line
* Make getmac a requirement not dependency
I should've RTFM.
* ws only change; I really need to get Emacs to understand these style guidelines
* Ran script/gen_requirements_all.py; script/setup needed to be run so that was failing.
* More style check fixes and one bug fix.
* Incomplete set of changes from last push
* More conform-to-hass-style changes: use caps to start log message (and do not use function name even for debug message. And do not use string concatenation; prefer new-style .format.
* Style fixes.
* Switch back to using the prefix config field for setting the unique_id since the mac address approach has numerous shortcomings including: 1) new dependency; 2) lack of reliability; 3) doesn't work for serial connections; 4) breaks when a layer 4+ networking entity intermediates the elk m1 connection.
* Reran to update (removing getmac dependency)
* Skipped trailing ','; keep forgetting which languages are forgiving about this practical nicety of allowing trailing commas without changing the semantics.
* Validate uniqueness on lowercase versions of the prefix since we're gonna use .lower() on creating the entity id that has to be unique; do the _has_all_unique_prefixes check last so we get errors from the device schema before complaining about the uniqueness problem, if any
* Use vol.Lower to convert to lowercase instead of the map. Also fixed a pair of bugs for the alarm control panel display message service -- since data templates always generate strings, the values subject to range/set restrictions need to be coerced to their proper type before the check
* Fix some flake8 warnings.
* Fixed typo; it's Coerce not coerce.
* Use elkm1m_ string to start unique_id when and only when there is a non-empty prefix given; this enables backward compatibility to avoid a breaking change by letting the elkm1_ start to unique_id keep working exactly as it used to.
* minor comment tweak to force automation tests to run again since they failed for unrelated reasons last time
* There's actually been a 0.7.15 release which was meta-information and tidying only so we might as well depend on it
* Forgot to update this with gen_requirements_all.py
* Initial commit of De Lijn (Flemish Public Transport) component
* Code corrections as per HA dev's requests
* changes to variable naming, setting attribution and states, plus some smaller optimizations
* Overlooked some linting issues, these are now fixed
* Updated pydelijn version requirement to 0.5.1 so UTC timestamps can be used instead of relative/local times.
Removed unused definition
* Updated pydelijn version requirement to 0.5.1 in requirements_all.txt
* Update the self._attributes dict directly instead of replacing it
Assign ATTRIBUTION while creating the _attributes dict
Remove the ATTRIBUTION assignment in device_state_attributes as it's updated in the async_update now.
* Linting issue (lenght of 2 lines) solved
* Removed a relative time attribute
Updated a linting issue in the LOGGER (used % instead of the format)
* Run mypy on homeassistant.scripts, disabling bunch of checks for now
* Declare async_initialize in AuthProvider
* Add some type hints
* Remove unreachable code
* Help mypy out
* Script docstring fixes
* fix preset documentation
* Use pydaikin set holiday method
* update temperature readings, code simplification
* more temperature cleanup
* cleanup HVAC_MODE
* remove get() method and move code to respectivly place
* remove string constant in code
* remove get() method and move code to respectivly place
* isort results
* fixes in state method
* Rename traffic_statistics to monitoring_traffic_statistics
For better consistency with huawei-lte-api.
* Add default device name for sensors
In case the actual device name cannot be accessed for some reason.
* Support device class in sensor metadata
* Mark known signal strength sensors as such
* Add suez water sensor
* flake8 test
* pylint test
* edition to fix flake8 and pylint issues
* edition to be okay with the musts
* Added a blank line to __init.py__ for flake8
* added blank line for flake8
* changer scan interval from 10 to 720 minutes
* use of pysuez
* bug fix and isort
* use of pysuez
* fixed flake8 and pylint errors
* update requirements_all.txt
* added a method to test login/password befire adding device
* flake8 edition
* update requirements_all.txt
* add of .coveragerc file with untested files
* update of .coveragerc
* Update homeassistant/components/suez_water/__init__.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update homeassistant/components/suez_water/sensor.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update homeassistant/components/suez_water/sensor.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update homeassistant/components/suez_water/sensor.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update homeassistant/components/suez_water/sensor.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update homeassistant/components/suez_water/sensor.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* bug fix in check credentials
* flake8 and pylint fixes
* fix codeowner
* update requirements_all.txt
* Sorted suez_water line
* edition to answer comments from @MartinHjelmare on #23844
* Attribute keys formatting to lowercase snakecase, name and icon constants returned directly, and remove of attribute. Update of .
* pylint edition
* correction wrong keys in client attributes
* remove of unnedeed return and move add_entities
* Vallox: Increase robustness on startup
Experiments showed that timing of websocket requests to the Vallox firmware is
critical when fetching new metrics. Tests on different Raspberry Pis and x86
machines showed that those machines with little processing power tend to fail
the timing requirments during the busy startup phase of Home Assistant,
resulting in the Vallox integration failing to set itself up.
This patch catches Websocket's InvalidMessage, which is a symptom of failing the
timing requirements. Experiments again showed that on the Raspberry's, this
exception is catched once at startup, but the integration is running fine
afterwards.
* Update __init__.py
* Bump to new 2.1.0 version of api.
* Bump to api 2.2.0
* Update Python-HPILO to 4.3
Update of Python-HPILO requirement to 4.3 to resolve outstanding SSL connections for older HP servers (ILO 3)
* Update requirements_all.txt
Update HPILO to 4.3
* Stub for polling from a central location
* Allow connection to know the entity objects attached to it
* Move polling logic to connection
* Don't poll if no characteristics selected
* Loosen coupling between entity and HKDevice
* Disable track_time_interval when removing entry
* Revert self.entities changes
* Use @callback for async_state_changed
* Split out unload and remove and add a test
* Test that entity is gone and fix docstring
* Add add_torrent service to Transmission
* Fix services.yaml format
* Verify that torrent is whitelisted
* Add logging if adding failed
* Change warn to warning
* Type check all helpers, add inline exclusions for work in progress
* Remove unused Script._template_cache
* Add some missing type hints
* Remove unneeded type: ignore
* Type hint fixes
* Mypy assistance tweaks
* Don't look for None in deprecated config "at most once" check
* Avoid None name slugify attempt when generating entity id
* Avoid None state store attempt on entity remove
* Reformat saved media data/ fix load + save helpers
* Add url constant
* Reformat saved media data
* Add tests for media data
* Refactor
* Revert deleted lines
* Set attrs after checking for lock
* Patch load games.
* remove unneeded imports
* fix tests
* Correct condition
* Handle errors with loading games
* Correct condition
* Fix select source
* add test
* Remove unneeded vars
* line break
* cleanup loading json
* remove test
* move check for dict
* Set games to {}
* Revert "Change Ambient solar radiation units to lx (#24690)"
This reverts commit 40fa4463de.
* Re-add sensor for Ambient PWS outdoor brightness (W/m^2)
* Corrected available and comments
* Member feedback
* Member comments
* Add support for Rainforest Eagle-200
* Removed direct access selector to monitored conditions
* Refactored code to use throttle on the update function
* Fixed issue in new code to use only one EagleReader instance
* Resolve comments
* Resolved comments
* Resolved comments and added Debug statement
* Added return statements
* Fixed typo
* Resolved comments and added debug statements
* Moved get_status method into Data object and decorated it with @staticmethod
* Resolved comments
* Update climate.py
Added support for Fan Only State
Added additional missing modes and states this should correct issue #25216
* Correct line lint error
* Corrected mode spelling
* Lint
* Update climate.py
Added support for Fan Only State
Added additional missing modes and states this should correct issue #25216
* Correct line lint error
* Corrected mode spelling
* Lint
* Bump simplisafe-python to 4.0.0 + add additional SimpliSafe attributes
* Fixed incorrect attr assignment
* Member comments
* Add system ID as a state attribute
* de-lint
* use _evo_tcs instead of _evo_device for TCS
* add hvac_action to zones, remove target_temp from controller
* fix incorrect hvac_action
* de-lint
* added login_method config option to fix login issue with RouterOS Version > 6.43
* minor changes so that users don't have to change their config
* removed default config value to make the fallback without config change work as expected
* de-lint
* use _evo_tcs instead of _evo_device for TCS
* add hvac_action to zones, remove target_temp from controller
* fix incorrect hvac_action
* de-lint
* Add severe weather alert sensor to Dark Sky
* fixup test case
* address review comments and fixup testcases
* address comments, fix assertion order
* remove extra line
* remove index increment
Using port on bridge initialization
Service: check_connection
Attribute: available
Updated requeriments_all.txt
Change unlatch service for open service
Removed extra info
nuki_lock_n_go renamed to lock_n_go
nuki_check_connection renamed to check_connection
* Add Fortigate integration
* added feedback changes
* removed the only case
* fixed a description
* removed the CONFIG_PLATFORM
* deleted README
* added return from setup
* added return from setup
* fixed reviews
* Link updated
* Rename var and a couple of other minor changes
* Typos
* adding custom service to Spotify component to allow to play random playlist music
* fixing findings
* improving naming
* improving way of using required parameters
* add hmip climate services
* Rename accesspoint_id to hapid
to comply with config
* Revert "Rename accesspoint_id to hapid"
This reverts commit 4a3cd14e1482fb508273c728ad8020945b02e426.
* Move device tracker to use config entry
* Remove monitored conditions attributes based on ADR0003
* Add support for import of device tracker config to be backwards compatible
* Remove unnecessary configuration options from device tracker
* Add component configuration support
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Add support for French
* Move labels to env_canada
* Bump env_canada to 0.0.17, change update frequency to 1 minute
* Update requirements_all.txt
* Set entity IDs separate from labels
* Flake error
* Remove monitored conditions
* Use next hourly forecast for missing conditions
* Switch sensors to unique_id
* Flake error
* Requested changes
* Simplify setting location parameters
* Added code to support entity and domain filters in the config for splunk component, and the code to enforce the filter.
* * Moved code for posting splunk request to separate function, primarily to more easily write a test case where I can mock the point where the post would occur and validate that filtering is working correctly.
* Test cases created for full config check and to test the filtering
* Correcting static check errors/issues
* Correcting flake8 static check issue (introduced when addressing prior static check issues)
* Removing unused parameter to setup function - cleanup from reviewer request.
* Fix valve/thermostat out of reach
* Fix boost for valves
* Set netatmo default max temp to 30
* Remove unnecessary get
* Remove unnecessary default value
* Readd get
* initial commit
* refactor for sync
* minor tweak
* refactor convert code
* fix regression
* remove bad await
* de-lint
* de-lint 2
* address edge case - invalid tokens
* address edge case - delint
* handle no schedule
* improve support for RoundThermostat
* tweak logging
* delint
* refactor for greatness
* use time_zone: for state attributes
* small tweak
* small tweak 2
* have datetime state attributes as UTC
* have datetime state attributes as UTC - delint
* have datetime state attributes as UTC - tweak
* missed this - remove
* de-lint type hint
* use parse_datetime instead of datetime.strptime)
* remove debug code
* state atrribute datetimes are UTC now
* revert
* de-lint (again)
* tweak type hints
* de-lint (again, again)
* tweak type hints
* Convert datetime closer to sending it out
* initial commit
* refactor for sync
* minor tweak
* refactor convert code
* fix regression
* remove bad await
* de-lint
* de-lint 2
* address edge case - invalid tokens
* address edge case - delint
* handle no schedule
* improve support for RoundThermostat
* tweak logging
* delint
* refactor for greatness
* use time_zone: for state attributes
* small tweak
* small tweak 2
* have datetime state attributes as UTC
* have datetime state attributes as UTC - delint
* have datetime state attributes as UTC - tweak
* missed this - remove
* de-lint type hint
* use parse_datetime instead of datetime.strptime)
* remove debug code
* state atrribute datetimes are UTC now
* revert
* de-lint (again)
* tweak type hints
* de-lint (again, again)
* tweak type hints
* Convert datetime closer to sending it out
* Fix valve/thermostat out of reach
* Fix boost for valves
* Set netatmo default max temp to 30
* Remove unnecessary get
* Remove unnecessary default value
* Readd get
* update component for xknx 0.11.0
- expose sensor state is not casted to float anymore
- climate mode operation list has no more None values
- light supports white_value (rgbw)
- sensor expects `group_address_state` now instead of `group_address`
- sensor forwards device_class if available
* update manifest to use xknx 0.11.0
* update requirements_all for xknx 0.11.0
* update for xknx 0.11.1
- require xknx 0.11.1
- use 'state_address' instead of 'address' in sensor and binary_sensor configuration
- optional 'sync_state' for sensors and binary_sensors
* remove questionable `del kwargs`
* add hmip climate services
* Rename accesspoint_id to hapid
to comply with config
* Revert "Rename accesspoint_id to hapid"
This reverts commit 4a3cd14e1482fb508273c728ad8020945b02e426.
* Correct google calendar test name
* Rewrite calendar component
* Save component in hass.data.
* Rename device_state_attributes to state_attributes.
* Remove offset attribute from base state_attributes.
* Extract offset helpers to calendar component.
* Clean imports.
* Remove stale constants.
* Remove name and add async_get_events.
* Add normalize_event helper function. Copied from #21495.
* Add event property to base entity.
* Use event property for calendar state.
* Ensure event start and end.
* Remove entity init.
* Add comment about event data class.
* Temporary keep old start and end datetime format.
* Convert demo calendar
* Convert google calendar
* Convert google calendar.
* Clean up google component.
* Keep offset feature by using offset helpers.
* Convert caldav calendar
* Clean up caldav calendar.
* Update caldav cal on addition.
* Bring back offset to caldav calendar.
* Copy caldav event on update.
* Convert todoist calendar
Persons are now threated the same as device trackers, so the logbook states
"<name> is at <location>" or "<name> is away" instead of "<name> changed to <location|not_home>"
Binary sensors now show phrases that relate to their device_class attribute.
So "Front door is closed" instead of "Front door turned off" or "Hallway PIR detected movement"
instead of "Hallway PIR turned on"
* Add support for World Wide Lightning Location Network
* Updated .coveragerc
* Added test
* Updated requirements
* Fixed tests
* Use local time for nearest strike
* Base geo location in place
* Finished geolocation work
* Fixed tests
* Cleanup
* Removed no-longer-needed method
* Updated requirements
* Add support for window and attrs
* Add strike ID to entity name
* Member comments
* Added CT80 Current Humidity Support
Added a check for if device is a CT80, and if so, queries the humidity object to get the current measured humidity reading.
* Update climate.py
Removed whitespace on line 229
* Update climate.py
Added humidity property. Version on local machine had that from previous tinkering.
* Update climate.py
Removed whitespace
* Update climate.py
Fixed tstat error handling for humidity data.
* Renames internal climate state variable to preset
* Shorten function comments
* Updates local variables on preset and temp changes
* Adds support for hvac_action
* Support populating list of flows from custom components
* Re-allow custom component config flows
* Add tests for custom component retrieval
* Don't crash view if no handler exist
* Use get_custom_components instead fo resolve_from_root
* Switch to using an event instead of lock
* Leave list of integrations as set
* The returned list is not guaranteed to be ordered
Backend uses a set to represent them.
* Add arcam_fmj support
* Just use use state in player avoid direct client access
* Avoid leaking exceptions on invalid data
* Fix return value for volume in case of 0
* Mark component as having no coverage
* Add new requirement
* Add myself as maintainer
* Correct linting errors
* Use async_create_task instead of async_add_job
* Use new style string format instead of concat
* Don't call init of base class without init
* Annotate callbacks with @callback
Otherwise they won't be called in loop
* Reduce log level to debug
* Use async_timeout instead of wait_for
* Bump to version of arcam_fmj supporting 3.5
* Fix extra spaces
* Drop somewhat flaky unique_id
* Un-blackify ident to satisy pylint
* Un-blackify ident to satisy pylint
* Move default name calculation to config validation
* Add test folder
* Drop unused code
* Add tests for config flow import
* bump envoy_reader version to 0.4
* bump dependency envoy_reader to 0.4
* Enphase envoy get individual inverter production
* Add period in function description
* Fix dumb typo
* Define _attributes in __init__
* Better error messages, make update async
* Fix format error
* Fix pylint errors
* set unknown state to None
* Bump envoy_reader version to 0.8
* Change attributes to separate sensors
* Fix dumb thing
* Improve platform_setup for inverters
* Remove unneeded self._attributes, refactor platform setup
* Refactor platform setup
* Implement Twilio SMS notify MediaUrl support
Adds support for setting the `media_url` parameter of the twilio API
client with an optional attribute under the notify `data`
attribute.
Per the twilio docs (https://www.twilio.com/docs/sms/send-messages#include-medi$
this feature is only available in the US and Canada, for
GIF, PNG, or JPEG content.
* lint: fix 80 char ruler
* use kwargs to set the media_url
after testing locally, seems like the previous way of using
object() was not working. this seems to be working
* re-use the ATTR_MEDIAURL attribute
* Make sure we use same family for ssl socket and connection
getaddrinfo result could be different from what connection
was made with. It also blocks potential use of
happy eye balls algorithm
This also fixes lingering sockets until python garbage
collection.
* Add availability value if unable to get expiry
* Fix lint issue
* Add support for aurora ABB Powerone solar photovoltaic inverter
* Add support for aurora ABB Powerone solar photovoltaic inverter
* Update stale docstring
* Fixed whitespace lint errors
* Remove test code
* Delete README.md
Website documentation contains setup instructions. README not needed here.
* Only close the serial line once.
* Correct newlines between imports
* Change add_devices to add_entites and remove unnecessary logging.
* Use new style string formatting instead of concatenation
* Directly access variables rather than via config.get
* Update sensor.py
* Update sleepyq to 0.7
Fixes crash when working with a single sleeper.
* sleepiq: Handle null side definitions
These happen if no sleeper is defined for a side of the bed. Don't
create sensors for null sides; they'll crash every time we try to use
them.
* sleepiq: Fix urls mocked to match sleepyq 0.7
* sleepi: Fix test_sensor.TestSleepIQSensorSetup
Sleepyq 0.7 throws on empty strings, so we have to specify them.
* sleepiq: Test for ValueError thrown by sleepyq 0.7
* sleepiq: Drop no longer used HTTPError import
* sleepiq: Add tests for single sleeper case
* sleepiq: Shorten comments to not overflow line length
* sleepiq: Use formatted string literals for adding suffixes to test files
* sleepiq: Use str.format() for test suffixing
* Add sonos.play_queue service
* Add SERVICE_PLAY_QUEUE import in alphabetical order
* Add queue_position parameter for sonos.play_queue service
* Move queue_position default to schema definition
* initial implementation for zha device trackers
* constant
* review comments
* Revert "review comments"
This reverts commit 2130823566820dfc114dbeda08fcdf76ed47a4e7.
* rename device tracker entity
* update trackers
* raise when not implemented
* Update homeassistant/components/device_tracker/config_entry.py
Review comment
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* move source type to base state attrs
* review comments
* review comments
* review comments
* fix super call
* fix battery and use last seen from device
* add test
* cleanup and add more to test
* cleanup post zha entity removal PR
* add tests for base entities
* rework entity tests
* move availability handling to device
* update last_seen format
* add battery sensor
* fix interval
* fix battery reporting now that it is a sensor
* remove zha entities and add battery sensor
* Added ability to send attachments in pushover notifications
* Added full name for exception to satisfy static check
* Fixed hanging indent lint problem
* Added path checking, removed import re, changed url check method to use
startswith.
* Removed argument from logging statement.
* Changed IOError to OSError, fixed logging, added logging statement.
* tweak battery icons according to device state/availability
* tweak battery icons according to device state/availability 2
* make dt objects aware
* make dt objects aware 2
* woops - use util.dt in favour of datetime
* woops - use util.dt in favour of datetime 2
* refactor battery icon code, remove parallel_updates
PR #22457 added some code that used new methods in `sisyphus-control` 2.2.
Unfortunately, because of the move to manifests it was merged still depending
on 2.1.
Fixes#24834
* Add template vacuum component
* Fix linting issues
* Make vacuum state optional
* Fix pylint issues
* Add context to template vacuum service calls
* Added tests to template vacuum
* Fix indent
* Fix docstrings
* Move files for new component folder structure
* Revert additions for template_vacuum tests to common.py
* Use existing constants for template vacuum config
* Handle invalid templates
* Add tests for unused services
* Add test for invalid templates
* Fix line too long
* Do not start template change tracking in case of MATCH_ALL
* Resolve review comments
* Zestimate fix for issue #23837
removed references to MIN_TIME_BETWEEN_UPDATES
and replaced with SCAN_INTERVAL
* Zestimate fix for issue #23837
removed references to MIN_TIME_BETWEEN_UPDATES
and replaced with SCAN_INTERVAL
* Add time delta option when searching for connections
Add another option 'in' to search for upcoming connections in the future.
Handy if you need a few minutes to get to the train station and need to add that to the queried departure time.
* correct style errors
* rename new option
* rename new option (2/2)
* add offset correctly
* Cleanup ZHA entities model and manufacturer usage.
Zigpy includes manufacturer and model as attributes of a zigpy
Device class, which simplifies handling of manufacturer and/or model
derived properties for the ZHA platform.
* Sort ZHA imports.
* Lint.
* Fixed integration with ESPhome, which caused an error if ESPhome did not update fast enough on startup
* Set state to problem if sensor is unavailable
* Fix line length.
* Option to change sensor names
* Python 3.5 compatibility
* Oops
* Get serial number at start
* Remove config opportunity
* Oops comma
* Changes from review
* Check yourself before you commit.
* Added Trafikverket train component
* Updated manifest with proper name and codeowner
* Updated requirements and manifest
* Updated CODEOWNERS
* Corrected requirements
* Added trafikverket_train/sensor.py to .coveragerc
* Added error handling and log if API call fails
* Corrected styles, removed dev log, improved validation
* Method calls to async_update(), improved error handling
* Minor cleanup/reorg for effeciency
* Added station cache and corrected to fit standards
* Simplified trainstop id and cleaned up dict.get
* Corrected mistake after change from dict to array
* Change device class to timestamp
* Add a test for see service gaurd
* Guard from seeing devices part of entity registry
* Await registry task early
* Lint
* Correct comment
* Clean up wait for registry
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Vlc telnet first commit
First functional version, remains to add more functionality.
* New functions added and bugfixes
* Compliance with dev checklist
* Compliance with dev checklist
* Compliance with pydocstyle
* Removed unused import
* Fixed wrong reference for exception
* Module renamed
* Fixed module rename in other
* Fixed wrong reference for exception
Module renamed
Fixed module rename in other
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Suggestions by @OttoWinter
+Manage error when the VLC dissapears to show status unavailable.
* Removed error log, instead set unavailable state
* Changes suggested by @pvizeli
-Import location
-Use of constants
* Implemented available method
* Improved available method
* Vlc telnet first commit
First functional version, remains to add more functionality.
* New functions added and bugfixes
* Compliance with dev checklist
* Compliance with dev checklist
* Compliance with pydocstyle
* Removed unused import
* Fixed wrong reference for exception
* Module renamed
* Fixed module rename in other
* Fixed wrong reference for exception
Module renamed
Fixed module rename in other
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Suggestions by @OttoWinter
+Manage error when the VLC dissapears to show status unavailable.
* Removed error log, instead set unavailable state
* Changes suggested by @pvizeli
-Import location
-Use of constants
* Implemented available method
* Improved available method
* Breaking change: Rewrite opentherm_gw to add support for more than one OpenTherm Gateway.
Breaks config layout and child entity ids and adds a required parameter to all service calls (gateway_id).
* Add schema and parameter description for service opentherm_gw.reset_gateway.
* Add optional name attribute in config to be used for friendly names.
Fix bugs in binary_sensor and climate platforms.
* pylint fixes
* Remove unused variables.
* Update manifest.json, remove REQUIREMENTS from .py file
* Update CODEOWNERS
* Address issues that were brought up (requested changes):
- Move imports to module level
- Change certain functions from async to sync
- Move constants to const.py (new file)
- Call gateway setup from outside of __init__()
- Move validation of monitored_variables to config schema
* Address requested changes:
- Make module imports relative
- Move more functions from async to sync, decorate with @callback where necessary
- Remove monitored_variables option, add all sensors by default
* Add a test for see service gaurd
* Guard from seeing devices part of entity registry
* Await registry task early
* Lint
* Correct comment
* Clean up wait for registry
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixing tplink issues with offline devices during setup.
* Fixing circleci errors.
* Adding code to defer the creation of entities that are not online.
* Addressing code review changes and cleaning up a little.
* Fixing tests and static analysis.
* Adding test to satisfy coverage requirements.
* Resolving merge conflicts.
* Fixing issue where lights don't appear in the integration page.
* Using pyHS100 properties for most sysinfo.
Addressing some PR feedback.
* Addressing some PR feedback.
* Better testing async_add_entities_retry
Testing for static dimmers.
Making greater use of conf constants.
* Fixing all static analysis issues.
* Adding non-blocking call for getting discovering devices.
* Address PR feedback
* Quick & Dirty weather alert integration
* Add attributes in weather alert sensor.
* MeteoFranceUpdate returns dept to init the alert watcher
* add rain forecast to weather attribute
* Add checks when no weather alert data are available
* Improve date and state when online source is unreachable
* update to take into account new API of vigilancemeteo 3.0.0
* Clean local patchs and put requirements in manfiest.json
* Use only one proxy for weather alerts to avoid too much HTTP requests
* linting and comments style corrections
* Add error catching and debug logging
* Correction following PR checklist
* Add code owners
* Update requirements_all.txt
* Comment style
* Update CODEOWNERS after rebaseline with dev branch
* update requirements_all.txt
* initial version of qfes bushfire geolocation platform
* removed all occurrences of legally protected names; using new georss library
* regenerated codeowners
* fixed pylint
* added one more valid category
* moved library import to top and ran isort
* Fix validator for lcn.send_keys service
* Removed lowercase table names from send_keys and lock_keys validators
* Revert lowercase regex.
* Fixed table name regex.
* change us-based default temps to Fahrenheit
* update CODEOWNERS
* update CODEOWNERS
* tweak docstring
* tweak docstring
* Coerce Fahrenheit Temps to int
* Adds integration for Plaato Airlock
* Updates codeowners and coveragerc
* Fixes lint errors
* Fixers lint check error
* Removed sv translation file
* Adds en translation file
* Sets config flow to true in manifest
* Moves config flow and domain to seperate files
* Fixes lint errors
* Runs hassfest to regenerate config_flows.py
* Adds should poll property and fixes for loop
* Only log a warning when webhook data was broken
* Fixes static test failure
* Moves state update from async_update to state prop
* Unsubscribes the dispatch signal listener
* Update sensor.py
* Added toggle service to cover
* Added toggle tilt service and tilt closed property
* Added is_tilt_closed so tilt can be toggled
* Added toggle services
* Added toggle tilt service
* Removed spaces
* Added tests for tilt services
* Updated tests
* Added range conversion in comparison
* Added tests to cover broken areas
* Fixed open/close tilt values and added toggle function
* Added default toggle behavior using tilt_position of 0, reverted other changes
* blank space
* Added constants and swapped assert comparisons
* Fixed attribute name
* Added mqtt responses in test
* Added constants
* Space
* Fix tilt_optimistic flag being ignored if status topic set
* Added more tests
* Changed async toggle call
* Updated group tilt test
* Updated format of asserts
* Updated states calls
* Updated function variables
* merge fixes
* Added blank line
* Changed calls to async
* More async updates
* Extract const to a const file, Add battery as tracker attribute, add accuracy filter option
* Update homeassistant/components/traccar/device_tracker.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/traccar/device_tracker.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/traccar/device_tracker.py
Use [] syntax for keys that are in the validated data.
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Fix indentation
* Update aioswitcher requirement to 2019.4.26.
* Removed unnecessary legacy function call.
* Fixed log message capital first letter.
* Replaced None argument with empty dict.
* Replaced guard.
* Added ServiceCallType.
* Added set_auto_off and update_device_name services to the component.
* Added test cases for service calls.
* Conditioned the component services registry with the platform discovery.
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Resolved change requests.
* Added ContextType.
* Addes permission verification for service calls.
* Added test cases for permision verification and more.
* Replaced POLICY_CONTROL with the more suited POLICY_EDIT.
* More appropriate function name.
* Added domain and entity_id validation for calling services.
* Removed service for setting the vendor's device name.
* Added name to sensors
Added name to sensors, should allow for multiple devices.
This should fix#22571 and #21591
* Update sensor.py
Fixed spelling issue, and line too long
* Update sensor.py
Removed _ as it is a friendly name
* Separate yeelight light classes
* Removed not used variable
* Allow to create device right away, when model is declared
* Lint fixes
* Use correct brightness, when nightlight mode is on
* Pylint fix
* Add power property
* Fix imports
* Update homeassistant/components/yeelight/light.py
Co-Authored-By: Teemu R. <tpr@iki.fi>
* Small PR fixes
* Simplify device to yeelight class mapping
* Simplify device initialization code
* Fix comment
Some location update messages do not contain the 't' (trigger) key. Before the change in 0.94 to
entity based trackers, these would default to source_type of 'gps' (due to default parameter
value in async_see method.) To mirror this behavior in the new entity based tracker, the
source_type property should default to SOURCE_TYPE_GPS under the same conditions.
Some location update messages do not contain the 't' (trigger) key. Before the change in 0.94 to
entity based trackers, these would default to source_type of 'gps' (due to default parameter
value in async_see method.) To mirror this behavior in the new entity based tracker, the
source_type property should default to SOURCE_TYPE_GPS under the same conditions.
* Add camera for buienradar radar
* Use asyncio.Conditions instead of asyncio.Lock
* Add test and fix python 3.5 compatibility
* rename interval to delta for consistency with BOM integration
* fix linting error introduced during rebase
* Improved buienradar.camera documentation and tests
* Incorporated one comment on a redundant/cargo cult function
* Improved documentation
* Increase test coverage by fixing one test by making it a coroutine
(to make it actually run), adding another test case, and changing
the flow in the implementation.
* style changes after review, additional test case
* Use python 3.5 style mypy type annotations in __init__
* Remove explicit passing of event loop
* Adopt buienradar camera as codeowner
* Update manifest.json
* Update CODEOWNERS through hassfest
Updated CODEOWNERS through hassfest (instead of manually), thanks to
@balloob for the hint.
* Support ZLO device types
Support the device types that are added in https://github.com/zigpy/zigpy/pull/176
so newer Zigbee devices can be supported.
* Remove BINARY_SENSOR mappings
* Add back ON_OFF_LIGHT_SWITCH, DIMMER_SWITCH and COLOR_DIMMABLE_LIGHT
Since they are target devices I've added them as switch and lights,
which matches the Zigbee documentation.
* Upgrade to zigpy-homeassistant v0.5.0
To be able to use the new DeviceTypes
* Add Linky sensors : yesterday + months + years
- SCAN_INTERVAL to 4 hours
- Always close_session after getting the data
- Add username attr
- Fix not updating Linky sensor when Enedis API fails
* Fix @balloob review: remove monitored_conditions
* Add APRS device tracker component
This component keeps open a connection to the APRS-IS infrastructure so
messages generated by filtered callsigns can be immediately acted upon.
Any messages with certain values for the 'format' key are position
reports and are parsed into device tracker entities.
* Log errors and return if startup failure
* Fix unit tests
* CREATE Somfy component
* CREATE cover Somfy platform
* USE somfy id as unique id
* UPDATE all the devices in one call to limit the number of call
* FIX Don't load devices if not yet configured
* IMP Replace configurator by a simple notification
* ADD log in case state does not match
* IMP wording
* REMOVE debug stuf
* ADD support for tilt position
* UPDATE requirements
* FIX Use code instead of authorization response
- Will allow to setup Somfy without https
* HANDLE stateless devices (Somfy RTS)
* FIX import locally 3rd party library
* UPDATE pymfy to 0.4.3
* ADD missing docstring
* FIX For Somfy 100 means closed and 0 opened
* FIX position can be None
* ENHANCE error management when error 500 occurs at setup
* FIX indent
* ROLLBACK tilt modification
- See https://community.home-assistant.io/t/somfy-tahoma-official-api/61448/90?u=tetienne
* FIX Look for capability instead of state
* DON'T use exception to test if a feature is available
* UPDATE dependency
* ADD device_info property
* AVOID object creation in each method
* REMOVE unused constants
* ADD missing doc
* IMP Only make one call to add_entities
* USE dict[key] instead of get method
* IMP Don't pass hass object to the entities
* FIX Don't end logging messages with period
* USE config entries instead of a cache file
* IMPLEMENT async_unload_entry
* CONSOLIDATE package
- see home-assistant/architecture#124
* UPDATE to pymfy 0.5.1
* SIMPLIFY config flow
* ADD French translation
* FIX 80 vs 79 max length
* ABORT flow asap
* FIX A tupple was returned
* MIGRATE to manifest.json
* ADD a placeholder async_setup_platform coroutine
- It's currently required and expected by the platform helper.
* FIX codeowner
* ADD missing translations file
* USE new external step
* UPGRADE pymfy version
* Close Somfy tab automatically
* ADD manufacturer
- Somfy only for the moment.
* HANDLE missing code or state in Somfy request
* REMOVE unused strings
* DECLARE somfy component to use config_flow
* APPLY static check remarks
* FIX async method cannot be called from sync context
* FIX only unload what has been loaded during entry setup
* DON't catch them all
* DON'T log full stacktrace
* ABORT conflig flow if configuration missing
* OMIT Somfy files for coverage
* ADD tests about Somfy config flow
* ADD pymfy to the test dependencies
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
Was improperly generating a warning each restart.
Was not properly handling a password change in configuration.
Was not properly removing config entries for accounts removed from configuration.
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
* Improve amcrest error handling and bump amcrest package to 1.5.3
amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter.
Get rid of persistent_notification.
Errors at startup, other than login errors, are no longer fatal.
Display debug messages about how many times an error has occurred in a row.
Remove initial communications test. If camera is off line at startup this just delays the component setup.
Handle urllib3 errors when getting data from commands that were sent with stream=True.
If errors occur during camera update, try repeating until it works or the camera is determined to be off line.
Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions.
Make entities unavailable if too many errors occur in a row.
Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again.
Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.)
* Update per review comments
Remove max_errors and recheck_interval configuration variables and used fixed values instead.
Move definition of AmcrestChecker class to module level.
Change should_poll in camera.py to return a fixed value of True and move logic to update method.
* Use LAN status instead of wireless status for DD-WRT device tracking
* Use the previous DD-WRT device tracker behavior unless specified in the configuration
* Add support for DoorLock cluster
* Add test for zha lock
* Change lock_state report to REPORT_CONFIG_IMMEDIATE
* Update channel command wrapper to return the entire result
This allows for return values other than result[1]
* Fix tests
* Fix lint
* Update DoorLock test to work with updated zigpy schema
* Fix lint
* Fix unlock test
* Refactor Waze Travel Time & Update Requirements
Refactored Waze Travel Time to contain a data object.
Changed error retrieving data to a warning.
Added distance conversion depending on region.
Removed dependency on TRACKABLE_DOMAINS list.
Update to use WazeRouteCalculator 0.10
3rd time's a charm. Deleted fork, caused last PR to screw up. So here we are.
* Update requirements_all.txt
* Revert package upgrade.
* Revert package upgrade.
* Bring the Sisyphus integration to silver quality
Checklist:
- [x] (N/A - push integration) Set an appropriate SCAN_INTERVAL (if a polling integration)
- [x] Raise PlatformNotReady if unable to connect during platform setup
- [x] (N/A - no credentials) Handles expiration of auth credentials. Refresh if possible or print correct error and fail setup. If based on a config entry, should trigger a new config entry flow to re-authorize.
- [x] (N/A - local integration) Handles internet unavailable. Log a warning once when unavailable, log once when reconnected.
- [x] Handles device/service unavailable. Log a warning once when unavailable, log once when reconnected.
- [x] Set available property to False if appropriate
- [x] Entities have unique ID (if available)
* Feedback (fix a couple verbose places)
* Use a task instead of a lock
* Initialize field in constructor
* Revert package upgrade.
* Add Streamlabs Water Monitor
* Fail Streamlabswater component setup when given invalid parameters
The Streamlabs Water component is unable to recover if it is given
an invalid API key or location id so this change is to ensure
we validate they are correct during setup and return a failure
if they are not.
* Prime Streamlabswater component sensors so data is available immediately
The sensors for the component were not causing an immediate load of
data from the API when being set up so there was some lag after
startup before values would show up. This change does an explicit
update when the sensors are setup to ensure data is viewable
immediately after startup.
* Switch Streamlabswater logging to use %s for string formatting
* Update Streamlabswater component with correct dependencies
Dependencies were incorrectly specified using DEPENDS rather
than DEPENDENCIES
* Streamlabswater pull request feedback
Remove detailed class docstrings since they're in the documentation,
reduce code duplication in sensor classes, and remove periods from
the end of log messages.
* Reduce line length in Streamlabswater sensor
* Add docstring on Streamlabswater service callback method
* Get rid of unnecessary initializers in Streamlabswater sensor
* Add manifest file for Streamlabs Water Monitor
* Remove unused REQUIREMENTS
* Added Google Cloud TTS service component feature
* Added Neutral voice gender
* Added line break at the end of files
* Updated CODEOWNERS, reqirements_all.txt and .coveragerc
* Fixed some ci/circleci: static-check errors
* Fixed some ci/circleci: static-check error
* Fixed some ci/circleci: pylint errors
* Fixed some ci/circleci: pylint errors
* * made supported_options const
* fixed direct env variable access
* Fixed import order
* * Component renamed
* Added encoding parameter
* Other fixes
* Changed folder name in .coveragerc
* * Removed whitespaces in blank lines
* Split long line
* Removed whitespaces in blank lines
* ci/circleci: static-check
* Fixed requirements_all.txt
* Added speed, pitch and gain parameters
* Added speed, pitch and gain as supported options
* Split too long line
* * Added profiles parameter
* Changed supported languages and encodings values
* Added parameters validations
* Fixes
* Fixes
* Fixes
* Fixes
* Fixes
* Changed options validation
* Added ToggleEntity save and restore state mechanism
* Revert "Added ToggleEntity save and restore state mechanism"
This reverts commit 0e275014
* Basic local SolarEdge monitoring for energy / power
* Basic local SolarEdge monitoring for energy / power
* generated CODEOWNERS, requirements, excluded tests
* generated CODEOWNERS, requirements, excluded tests
* lint fixes, etc
* lint fixes, etc
* Fix docstyle for init
Of course thats the file I forgot to run tests on
* Load all sensors by default
They use the same API endpoint. This changes was made per https://github.com/home-assistant/architecture/pull/244
* remve unneded date/time
* ran hassfest again
* add throttle when updating
* readd solax, mistakenly removed
* Update sensor.py
* Add support for learning new commands
This update creates a generic service in the 'remote' component to enable remote control platforms to learn new commands.
* Update __init__.py with the proposed changes
- Add 'supported_features' property and a constant related to the 'learn_command' functionality.
- Redefine 'async_learn_command' function as a coroutine.
* Update __init__.py
* Fix assertion error
Adding the 'supported_features' attribute generated an assertion error on the 'Demo Remote' platform. This update fixes this.
* Fix duplicated 'hass' object
This update fixes a typo that occurred at the last update.
* Update cover.py
Blinds, Rollingshutters and Awnings did not set their respective device_class attribute
Previously they would all appear as device_class "window"
* fallback device class is always 'window'
fallback device class is always 'window' in the event we have an unknown cover type
* trailing whitespace removed, trimmed as well
* Update cover.py
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Add service for adding event to google component
* Add service examples for google.add_event
* add refactoring based on reviews
* Fix too long lines
* Order import
* Move to move line
* Remove parenthesis
* Add service for adding event to google component
* Add service examples for google.add_event
* add refactoring based on reviews
* Add check for correct scopes, otherwise re-authenticate
* fix build failure
* fix build failure
* Adds AdGuard Home integration
* 👕 Addresses linting warnings
* 🚑 Fixes typehint in async_setup_entry
* 👕 Take advantage of Python's coalescing operators
* 👕 Use adguard instance from outer scope directly in service calls
* 👕 Use more sensible scan_interval default for sensors
* 👕 Adds specific files to .coveragerc
* ☔ Added tests and small changes to improve coverage
* 🔨 Import adguardhome dependencies at the top
* 🚑 Converted service handlers to be async
* 🔥 Removed init step from config flow
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
Enable feature by default but allow it to be disabled by "control_light: false" in config.
Get brand from camera instead of assuming Amcrest (since this works with other cameras, too.)
Retrieve RTSP URL in update method instead of in stream_source property and in handle_async_mjpeg_stream method.
Move amcrest imports from methods to global.
* Fixing tplink issues with offline devices during setup.
* Fixing circleci errors.
* Adding code to defer the creation of entities that are not online.
* Addressing code review changes and cleaning up a little.
* Fixing tests and static analysis.
* Adding test to satisfy coverage requirements.
* Resolving merge conflicts.
* Fixing issue where lights don't appear in the integration page.
* Using pyHS100 properties for most sysinfo.
Addressing some PR feedback.
* Addressing some PR feedback.
* Better testing async_add_entities_retry
Testing for static dimmers.
Making greater use of conf constants.
* Fixing all static analysis issues.
* Adding non-blocking call for getting discovering devices.
* Address PR feedback
* Revert back to previously used library
* Fix test
* Remove unused import
* Fix import
* Update __init__.py
* Update __init__.py
* Fix test after rebase
* Move tradfri component to use new zeroconf discovery
* Will this work?
* Remove prints
* Correct order in generated zeroconf
* Update test_init.py
* Update test_init.py
* Update test_init.py
* Update test_init.py
* Extract exposed devices function
* Add might_2fa info to trait
* Do not filter with should_expose in Google helper func
* Cloud: allow setting if Google entity is exposed
* Allow disabling 2FA via config
* Cloud: allow disabling 2FA
* Lint
* More changes
* Fix typing
* Bumped to version 2.0
* Updated requirements
* Updated requirements and coveragerc
* Removed long lines, changes to coveragerc and requirements
* Fixed under-indented lines
* Fixed invalid syntax
* Updated .coveragerc to include repetier/__init__.py and sensor.py
* Module update
* Rebased to latest dev
* Blank lines fix
* Add missing manifest.json
* Update requirements
* Bumped component to new API module style
* Removed whitespaces and line feeds
* Added missing newline
* Added missing heated chamber sensor
* Fixed wrong indentation
* Various fixes
* Various build fixes
* Clean up
* Load platform only once
* Sort imports
* Add printer api
* Clean up
* Build out sensor classes
* Clarify temperature sensor variable names
* Move constants
* Clean up name
* Run script/gen_requirements_all.py
* Working code, missing auto add of new sensors
* Updated code to return proper device_class and timestamp
* Removed unnessecary code
* Renamed elapsed and remaining sensors
* Dynamically adding sensors as they become available
* Rebased .coveragerc due to conflicts
* Code changes and cleanup
* Removed whitespace and code simplification
* Use global import for ESPHome
* Add aioesphomeapi to test requirements
aioesphomeapi is also shipped as a pure-python wheel, so this should not impact test install time
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* Use central polling to update entities
* Fix for line length
* Remove unnecessary import
* Use interval
* Trigger entity refreshes after commands
* Lint
* v1 of Azure Event Hub History component
* updates to EH
* small fix
* small updates and changed requirements_all
* new version of Event Hub component
* redid config to just ask names
* small edit
* latest version of EH component
* updated codeowners
* codeowner fix
* typo in domain
* updates based on reviews.
* using built-in jsonencoder for DT
* delete unused import
* Solax inverter direct API
* Linter compliance
* lint++
* move api communication to external lib
* lint++
* requirements
* Revert "requirements"
This reverts commit 82a6c0c095.
* potentially?
* Addressing review comments
* Also update CODEOWNERS
* Only update sensor state if data has changed
* Moved helper functions to const.py
* Removed pypck attribute from LcnDevice
* Bump to pypck==0.6.0
* Added myself as a codeowner
* Moved helper functions to helpers.py
* Added support for MCP23017 I2C GPIO extender.
* Updated .coveragerc to exclude mcp23017 component from tests.
* Generated CODEOWNERS for mcp23017 usign script.
* Removed .svn folder that had been accidentally uploaded.
* Added link to www.home-assistant.io docs in manifest.json
* Fixed logic error in switch platform.
* Cleaned up code and removed unnecessary should_poll() function.
* Limited the options for pull mode to UP and DOWN
* Fixed line too long in binary sensor.
* Fixed line too long on switch.py
* Changed to setup_platform.
* Reorder constants
* Change timeout from 5 seconds to 10 seconds
Underpowered platforms timeout during configuration/discovery of a Hue bridge on a new install. Increasing this timeout fixes this.
* Add 'adb_response' attribute to Android TV / Fire TV
* Use None instead of empty string for empty ADB responses
* Initialize self._adb_response as None, not empty string
* Update the state after sending an ADB command
This ensures that the `'adb_response'` attribute contains the response to the latest command
* Zestimate: fix for issue #23757
Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
Also removed MIN_TIME_BETWEEN_UPDATES in
favor of SCAN_INTERVAL per suggestion from
amelchio#9580 on Discord
* Zestimate fix for issue #23757
Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
* Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
* moved code fix to the correct function
* removed code change from unique_id function
* Fix entity id naming when not using first install
Currently, the verisure component will use the alias of the first
installation to decide entity id of the alarm_control_panel even though
a different installation is configured through a specified giid. This
fixes that
* Fixed pulled request review comments
* Remove trailing whitespace
* Fix remaining pylint errors
* Proof of concept
* Follow comments
* Fix line length and bad imports
* Move imports to top
* Exception handling for unicode decoding
Create debug print for new service types
Add empty test files
* First try at a test
* Add type and name to service info
Fix static check
* Add aiozeroconf to test dependencies
* Use HA defined timezone
* Cleanup
* Use homeassistant.util.dt.now to get the correct time.
* Update homeassistant/components/vasttrafik/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Remove schedule management. Allow custom HTTP events defined in the configuration
* Consolidate doorbird request handling. Make token a per device configuration item.
* Lint fixes
* Do not register dummy listener
* Remove punctuation
* Split up method to allow caching event
* Lower frequency of updates.
* Code review patches.
* Minor changes to test
* Skip end of period at fixed multiple of delta.
Improved documentation.
* Initial commit
* add lastComms and de-lint
* dummy commit
* dummy commit 2
* refactor to temp in favour of battery
* back to battery, and no temp
* use snake_case
* Bump client
* only v3 API exposes device attributes
* delint
* delint2
* Change GeniusSwitch to GensiusBinarySensor
* Use aiozeroconf in preparation for new zeroconf discovery
* Update requirements
* Remove sleep
* Make stop zeroconf a coroutine
* Remove unused import
* Fix aiozeroconf dependency in default_config tests
* updated list of supported fan_modes
* AirBase units does not support Holiday-mode
* AirBase units does not support outside temp
* pydaikin version bump
* don't modify constant
* Start moving parts of yaml utils to own module
Move parts of yaml loader out of the single large file and start
to create the structure of the yaml loaders in Ansible [0].
[0]: https://github.com/ansible/ansible/tree/devel/lib/ansible/parsing/yaml
* Finish yaml migration, update tests and mocks
* Move code around to finish the migration
* Update the mocks so that `open` is patched in
`homeassistant.util.yaml.loader` instead of
`homeassistant.util.yaml`.
* Updated mypy ignores
* Updated external API of `homeasistant.util.yaml`, see below:
Checked what part of the api of `homeassistant.util.yaml` was actually
called from outside the tests and added an `__ALL__` that contains only
these elements.
Updated the tests so that references to internal parts of the API (e.g.
the yaml module imported into `homeassistant.util.yaml.loader`) are
referenced directly from `homeassistant.util.yaml.loader`.
In `tests/test_yaml.py` the import `yaml` refers to
`homeassistant.util.yaml` and `yaml_loader` refers to `~.loader`.
Future work that remains for the next iteration is to create a custom
SafeConstructor and refers to that instead of monkey patching `yaml` with
custom loaders.
* Update mocks in yaml dumper, check_config
* Update Sesame component to use Candy House's library using the V3 API
* Updated requirements_all.txt
* Fix pylint warning
* Revert back to ATTR_DEVICE_ID
* Try to make the process more readable and paritioned.
* Validate child values using set message.
* Only validate using relevant schemas.
* Extract node validation.
* Rework const types and schemas.
* Rework child validator.
* Enhance warning logging message.
* Return an extra oauth2 auth code during onboarding
* Areas in const
* Add integration step
* Lint
* Fix tests
* Fix test
* Verify integration added to done
* Verify step is marked as done
* Added new component meteoalarm
* Update sensor.py
* Update manifest.json
* Update manifest.json
* Update manifest.json
* Added file CODEOWNERS
* Modified some code, thanks @amelchio
* removed Throttle because is not being used anymore
* Update _attributes ad _state
* some cleanup
* Update sensor.py
Change sensor to binarysensor
* Rename sensor.py to binary_sensor.py
rename the file
* Update binary_sensor.py
Removed BinarySensorDevice from class
* Update binary_sensor.py
Made a mistake with BinarySensorDevice
* Update binary_sensor.py
clean up white spaces
* Update binary_sensor.py
Fix BinarySensorDevice
* Update binary_sensor.py
cleanup the import libs
* modified __init__
* fix
* final fix, thanks @amelchio
* forgot to change the sensor.py
* correct some typo in text
* fix typos
* fix another typo
* fix typo
* Add TTL custom support and custom headers support.
* fix pywebpush version
* removed whitespaces surrounding docstrings.
* fixes for tests
* priority option to data
* checking of ATTR_ENDPOINT
* change checking of target to vol.Schema
* more tests
* Clean and fix google calendar tests
* Extract test calendar constant for google test
* Rewrite google calendar tests
* Clean and fix google calendar tests
* Clean and fix google component tests
* Add google conftest
* Skip flaky google calendar test
* Fix google calendar bug
* Fix yield fixture
* Set fixture names to avoid lint warning
* Fix yield fixture
* Updated to the current version of dev
* Added the component to .coveragerc
* Added __init__.py and manifest.json
* Changed the manifest to comply the json format
* Changes in for complete the PEP8 Code
* Fixed the api call to use PyPI package
* Fixed API correrct call
* Fixes for complete the requirements
* Added dependencies in manifest.json
* Changed the __init__.py to complete PEP8
* Simplified the __init__.py
* Runned codeowner script
* executed gen_requirements_all.py
* Direct call for dicts and unit changed to minutes
* Fixed the optional dict call, sorry, my bad, I did not that
* Deleted unused vars
* Changed optional parameter to required
* Remove blank first line
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Use dt_util.utcnow
* Platform setup should not have a return value
* Remove explicit dependency to zeep[async]
* Bump onvif-zeep-async to 0.1.2
* Update requirements_all.txt
* Add exception handling
* Fix static checks
* Don't catch generic exceptions
* Update camera.py
* refactor - add const.py, change order of propertys, methods
* import client at top of file
* remove debug line
* de-lint
* delint
* add me as CODEOWNER
* remove lint hint
* delint
* Prevent turning on tellduslive lights with 0 brightness
It was possible for the light compontent to get in a state where the last_brightness was set to zero, and when turning on (by calling turn_on) it would call the TellStick with 0 dim level, ergo not turning on the light.
With this, it will fall back on a 75% dim level if the level is set to zero.
* Wrap long log line over two lines
And using a more proper way of formatting the message
* Fallback to 100% instead of 75%
* Make entity_filter be a modifiable builder
* Add render_with_collect method
* Use sync render_with_collect and non-class based test case
* Refactor: Template renders to RenderInfo
* Freeze with exception too
* Finish merging test changes
* Removed unused sync interface
* Final bits of the diff
* ptvsd debugger component.
* Add test case
* ptvsd as test dependency
* Fix for 3.5
* Fixed bootstrap test
* Use dict direct lookup.
* Don't need to load dependencies.
* Get the test working.
* 3.5 fix
* Set mock return value
* Put tests back, but skip them
* Change log level
fix check for already created entities
remove hepa and carbon filter
add AQI attribute
initial commit
fix check for already created entities
remove hepa and carbon filter
add AQI attribute
add air quality component tests
fix method call tests
fix line lengths
fix pylint issues
fix docstrings
revert fan related changes
remove whitespace change
fix fan update state test
add for loop for platform initialization
add requested changes to aiq platform
change string concatenation to new style string formatting
update air quality tests
update air quality tests
refactor sensor component changes
fix pylint issues
fix debug string in the air quality component
replace failing tests for older devices
fix line length fan tests
remove dependencies const and move imports
move back imports to methods
remove whitespace from blank line
* Always print invalide configuration data
* Print offending data as yaml
* Revert "Print offending data as yaml"
This reverts commit 01721a21a9ff918ed2c8595151ebfe55eb2f7d36.
* Do not print sensitive data
* Print MQTT topic
* Add line break
* Review comments
* review comments
Fixed AlexaPowerController to report power state for thermostats, to look if state is OFF return OFF, otherwise report ON as thermostats have multiple values for ON
* Don't send volume on volume set
This needs updated lib
* Bump version and avoid getting channels explicitly
* Add myself as codeowner
* Use version 0.0.8 instead which doesn't reuse session
Some TV's doesn't play nice with HTTP/1.1 connection
re-use.
* Add new requirement to requirements_all.txt
The config option 'max_result' was assigned to not existing 'max_result' variable, it should be assigned to 'maxResult'.
The current version causes an error when max_result option is used.
* Added option to use self-signed certificates
I defined a new option for configuration.yaml, 'verify_ssl', which is set to 'True' by default for obvious security reasons. However, in order to work with self-signed certificates, it is now possible to disable the certificate validation.(eg, I use a nextcloud instance with self-signed certificates)
Credit for code in line 57 goes to user 'gen2' on the homeassistant community, who suggested this solution.
https://community.home-assistant.io/t/caldav-configuration/38198/25
I only took it a step further and made it a config option.
* Update calendar.py
* Added the import of CONF_VERIFY_SSL
I hope this passes the test now...
* Update homeassistant/components/caldav/calendar.py
Cool! Didn't know about that possibility, my coding experience is literally two weeks. Thanks for sharing!
Co-Authored-By: anrudolph <49680492+anrudolph@users.noreply.github.com>
* Removed some lines of code
I think, in order for the last commit to work, these lines have to be removed. Correct?
* Trying to get this passing the checks
Trying around to get the simplified code to work
Improve sdcard sensor so it only sends one command to camera per update as opposed to the four it used to send to reduce network traffic and make data consistent. Also better handle returned values of 'unknown'.
* Refactor NETATMO_AUTH to use hass.data
* Minor cleanup
* Rename conf to auth and other suggestions by Martin
* Revert webhook name change
* Rename constant
* Move auth
* Don't use hass.data.get()
* Fix auth string
* Allow host/ipv6 address for broadlink service
This matches switch config and is a regression fix
* Restore padding of packets for broadlink
* Drop unused import
* Fix comment on test
* Bump Ecovacs dependency (sucks)
Update to new version of sucks, which switches to a custom-built SleekXMPP that turns off certificate validation. This is to fix issues caused by Ecovacs serving invalid certificates.
* Update requirements file
* Refactor NETATMO_AUTH to use hass.data
* Minor cleanup
* Rename conf to auth and other suggestions by Martin
* Revert webhook name change
* Rename constant
* Move auth
* Don't use hass.data.get()
* Fix auth string
* Allow host/ipv6 address for broadlink service
This matches switch config and is a regression fix
* Restore padding of packets for broadlink
* Drop unused import
* Fix comment on test
* Add amcrest camera services and deprecate switches
- Implement enabling and disabling motion detection from camera platform.
- Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function.
- Add camera attributes to indicate the state of the various camera settings controlled by the new services.
- Deprecate switches in favor of camera services and attributes.
* Rename services and move service handling to __init__.py
Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml.
Add services.yaml.
Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent.
Move service handling code to __init__.py from camera.py.
* Update per review comments, part 1
- Rebase
- Add permission checking to services
- Change cv.ensure_list_csv to cv.ensure_list
- Add comment for "pointless-statement" in setup
- Change handler_services to handled_services
- Remove check if services have alreaday been registered
- Pass ffmpeg instead of hass to AmcrestCam __init__
- Remove writing motion_detection attr from device_state_attributes
- Change service methods from callbacks to coroutines
* Update per review comments, part 2
- Use dispatcher to signal camera entities to run services.
- Reorganize a bit, including moving a few things to new modules const.py & helpers.py.
* Update per review comments, part 3
Move call data extraction from camera.py to __init__.py.
tox fails due to being unable to reference the `script` module when
trying to run `script/gen_requirements_all.py`. Instead it needs to be
run as a module.
* Implement EnOcean temperature and humidity sensors.
* Bump EnOcean version to 0.50
* Refactor components for more generic device handling
* Move radio packet data interpretation to specific devices
* Update CODEOWNERS
* Implement code review changes
* Bump Ecovacs dependency (sucks)
Update to new version of sucks, which switches to a custom-built SleekXMPP that turns off certificate validation. This is to fix issues caused by Ecovacs serving invalid certificates.
* Update requirements file
* Fix non syncthru-syncthru supporting printers
* Formatting
* Update requirements_all
* Update syncthru.py
* Fix component to be async (as is the used SyncThru implementation)
* Add async syntax
* Omit loop passing
* Don't await async_add_platform
* Generate new all requirements
* Explain, why exception is caught in setuExplain, why exception is caught in setupp
* Handle failing initial setup correctly
* Formatting
* Formatting
* Fix requested changes
* Update requirements and add nielstron as codeowner
* Run codeowners script
* Make notification about missing syncthru support a warning
* Revert pure formatting
* Fix logging
* Expose door cover/binary_sensor as door type
More logical to ask "What doors are open" than "What sensors are open"
* Add test for binary_sensor device_classes
* Cosmetic flake8
* Add test for device class for cover
* Add action.devices.traits.Volume
* Drop media player from brightness trait
* Factor out commands into separate functions
* Drop support for explicit mute
* Expose door cover/binary_sensor as door type
More logical to ask "What doors are open" than "What sensors are open"
* Add test for binary_sensor device_classes
* Cosmetic flake8
* Add test for device class for cover
* reorg HmiP Imports after introduction of manifests
* add type to some functions
* fix usage of dimLevel (HomematicipDimmer,HomematicipNotificationLight)
* align naming to HomematicipMultiSwitch: channel_index -> channel for (HomematicipNotificationLight)
* fix lint
* Fix is_on for dimmers
* fix lint
* Drop unused constant
* Don't default to localhost
A philips tv will never run on localhost
* Use library internal state
* Add play media support for channels
* Control update manually
This allow us to delay update of state when we perform
and action.
* Bump version for support for api v1 again
* Consider missing source and only channels as channels
* Fix some flake8 tasks
* Fix some pylint errors
* Adjust requirements_all file
* Switch to async_add_executor_job
* Assume device turns of off a sucessfull standby call
* Hass.io Add-on panel support for Ingress
* Revert part of discovery startup handling
* Add type
* Fix tests
* Add tests
* Fix lint
* Fix lint on test
* Added component named switcher_kis switcher water heater integration.
* Fixed conflicts.
* Updated requirements.
* Added manifest.json file and updated CODEOWNERS.
* Fixed requirements_all.txt.
* Better component tests.
* Removed unnecessary parameter from fixture function.
* Removed tests section from mypy.ini.
* Remove unused ENTITY_ID_FORMAT.
* Stop udp bridge when failed to setup the component.
* Replace DISCOVERY_ constants prefix with DATA_.
* Various change requests.
* Fixed constant name change remifications.
* Added explicit name to fixture.
* Various change requests.
* More various change requests.
* Added EventType for homeassistant.core.Event.
* Switched from event driven data distribution to dispatcher type plus clean-ups.
* Removed name and icon keys from the component configuration.
* Various change requests.
* Various change reqeusts and clean-ups.
* Removed unnecessary DEPENDENCIES constant from swith platform.
* Replaced configuration data guard with assert.
* Removed unused constants.
* Removed confusing type casting for mypy sake.
* Refactor property device_name to name.
* Removed None guard effecting mypy only.
* Removed unnecessary function from switch entity.
* Removed None guard in use by mypy only.
* Removed unused constant.
* Removed unnecessary context manager.
* Stopped messing around with mypy.ini.
* Referring to typing.TYPE_CHECKING for non-runtime imports.
* Added test requierment correctyly.
* Replaced queue.get() with queue.get_nowait() to avoid backing up intervals requests.
* Revert changes in mypy.ini.
* Changed attributes content to device properties instead of entity properties.
* Fixed typo in constant name.
* Remove unnecessary async keyword from callable.
* Waiting for tasks on event loop to end.
* Added callback decorator to callable.
* Fix read gps position accuracy & read device status
* Fix: W291 trailing whitespace & E501 line too long (80 > 79 characters)
* Upgrade pytraccar dependency to 0.7.0
* met snake case
* Hass.io Add-on panel support for Ingress
* Revert part of discovery startup handling
* Add type
* Fix tests
* Add tests
* Fix lint
* Fix lint on test
* Remove archived 17track packages from the entity registry
* Fix incorrect __init__.py
* Member comments
* Member comments
* Fix too many params
* Member comments
* Member comments
* Set default value for input_datetime
If no initial value is set and no value is available to be restored, set the default value as specified in the docs to 1970-01-01 00:00.
* Use regular if statement
Ternary statements can be tricky if you try to keep the value the same if not something
* Add test for default values
Check that if no initial value is set, state returns 1970-01-01 at 00:00
* Fix tests - was passing wrong args to time/date
* Verify we get a timestamp attribute for input_datetime
This adds a check that when using the default timestamp of 1970-1-1 00:00:00, we
get a timestamp attribute. This is waht prompted this PR in the first place, as
when specifying an automation trying to access the timestamp attribute for a non-
initialized input_datetime HASS wouldn't start.
* Simplify the change for a default value
Based on @balloob comment. Simplifying the code
* Revert "Simplify the change for a default value"
This reverts commit c2d67f19a6.
* update vizio component to support latest pyvizio with soundbar support
* Resolved Hound issues
* Additional Hound issue
* Updated based on feedback
* Style updates
* Additional code styling changes
* Added check for auth token not being set for tv device_class
* Limited lines to 80 characters
* moved MAX_VOLUME into base package
* fixed supported commands
* styling changes
* fix styling yet again
* remove unnecessary elif
* removed play/pause since I can't get current state
* changed value access method from config dict
* fixed flake failures
* try to fix docstring
* try to fix docstring
* fixed auth token validation
* rebase and regenerate requirements_all.txt
* updated log text
* line length fix
* added config validation to handle conditionally optional parameter
* updated validate setup log message and string formatting based on review
* fix pylint error
* less ugly
* handle the off part of on with timed off command
* use correct var
* only bind / configure cluster once
* clean up channel configuration
* additional debug logging
* add guard
* prevent multiple discoveries for a device
* cleanup and still configure on rejoin
* Skip entity if no device type found
* Add test for potentially skipped binary sensors
* Reorg code, add tests to ensure all exposed things have types
* Lint
* Fix tests
* Lint
* Add basic support for native Hue sensors
* Update coveragerc
* Simplify attributes
* Remove config option
* Refactor and document device-ness and update mechanism
* Entity docstrings
* Remove lingering config for sensors
* Whitespace
* Remove redundant entity ID generation and hass assignment.
* More meaningful variable name.
* Add new 'not-darkness' pseudo-sensor.
* Refactor sensors into separate binary, non-binary, and shared modules.
* formatting
* make linter happy.
* Refactor again, fix update mechanism, and address comments.
* Remove unnecessary assignment
* Small fixes.
* docstring
* Another refactor: only call API once and make testing easier
* Tests & test fixes
* Flake & lint
* Use gather and dispatcher
* Remove unnecessary whitespace change.
* Move component related stuff out of the shared module
* Remove unused remnant of failed approach.
* Increase test coverage
* Don't get too upset if we're already trying to update an entity before it has finished adding
* relative imports
* Kill bluetooth LE scanning gracefully when asked to shut down.
* Add missing argument.
* Refactor to use data instead of passing nonlocal variables about.
* Fix typo.
* Skip entity if no device type found
* Add test for potentially skipped binary sensors
* Reorg code, add tests to ensure all exposed things have types
* Lint
* Fix tests
* Lint
* Add basic support for native Hue sensors
* Update coveragerc
* Simplify attributes
* Remove config option
* Refactor and document device-ness and update mechanism
* Entity docstrings
* Remove lingering config for sensors
* Whitespace
* Remove redundant entity ID generation and hass assignment.
* More meaningful variable name.
* Add new 'not-darkness' pseudo-sensor.
* Refactor sensors into separate binary, non-binary, and shared modules.
* formatting
* make linter happy.
* Refactor again, fix update mechanism, and address comments.
* Remove unnecessary assignment
* Small fixes.
* docstring
* Another refactor: only call API once and make testing easier
* Tests & test fixes
* Flake & lint
* Use gather and dispatcher
* Remove unnecessary whitespace change.
* Move component related stuff out of the shared module
* Remove unused remnant of failed approach.
* Increase test coverage
* Don't get too upset if we're already trying to update an entity before it has finished adding
* relative imports
* Kill bluetooth LE scanning gracefully when asked to shut down.
* Add missing argument.
* Refactor to use data instead of passing nonlocal variables about.
* Fix typo.
* Pass host string instead of forcing an ip-address
Pass the configured host (https://www.home-assistant.io/components/homematic/#host) instead of always forcing an ip-address. This is required to get SSL certificate validation working.
* Remove unused 'socket' import
Because Luftdaten assigns separate ids for particle and weather
measurements, most if not all stations added with config flow will
have non-functional sensors, as mentioned in #19591. This change
prevents the creation of sensors without data.
There was a potential unique ID collission which caused problems for some users, as scenes and devices are enumerated separately, so the same ID could be assigned to in they are unnamed.
So I changed the unique ID generation for scenes to avoid this, which is a breaking change wrt scenes.
* STATE_UNCERTAIN for Homematic Lock devices introduced
Homematic Lock devices provides an uncertain flag if the lock was opened manually an the lock is uncertain regards the status.
The other necassary functionality was implemented in pyhomematic by Daniel earlier...
* enabled attribute transition in light service for homematic dimmer devices
* Update light.py
* Revert "Update light.py"
This reverts commit f5565a006d.
* Revert "Revert "Update light.py""
This reverts commit 2c264826ef.
* fix for line too long error
* trailing whitespace
* Adding Genius Hub
* Added Genius hub
* Correct hound errors
* Correct hound errors.
* Correct tox errors.
* Fix travis errors
* Correct sensor names
* Correct travis errors
* Correct hound errors
* Follow up from code review by Martin Hjelmare
* More changes from code review.
* Attempt to resolve conflicts in requirements_all
* de-lint for the houndci-bot
* better logging message, and small tidy-up
* minor refactor and de-lint
* domain name should be the same as the component name
* use self where appropriate
* minor de-lint
* add entities as a single call
* de-lint
* all read-only attrs almost done
* refactor - near the end
* change state/,ode mapping
* override temp from curr_temp
* all read-only properties working
* working now
* ready for PR, but need to remove logging
* de-lint
* de-linted, ready for merge
* de-linted, ready for merge 2
* didn't like import in climate/__init__
* improve footprint logic
* add manifest.json
* add manifest.json 2
* correct a regression
* fix regression with device.is_on()
* use latest client library
* update to latest client library, 3.3.6
* delint and shoudl be OK to go
* Add target_temp_high/low and current_temperature
water_heater piggy back on climate(thermostat) component in gui,
so these things are already supported by frontend for display
purposes.
* Drop support tags for target high/low
* Remove explicit declaration of automatic found devices as RGBW
* fixes for Magic Home only-white controllers
* mode is now set to None instead of removed entirely
* flux_led now changes no values when turned on from off state.
* better checking for changed values in turn_on
* Reduce waiting time to 1 second
* Correction of turn on logic
* Remove accidentally inserted 'not'
* Remove lint
* Remove redundant code
* load cleanups
* Remove unused methods
* Allow importing requirements at the top of a file
* Fix test
* Lint
* Install reqs ASAP when loading platforms
* Added basic Supla (https://www.supla.org) support (covers)
* PySupla upgrade, minor spelling corrections and .coveragerc update
* Linter errors cleanup
* More linter cleanups.
* Documentation link removal and import sorting
* Docstring formatting
* PR suggestions
* Styling and linting
* PySupla version update
* Removal of ALLOW_EXTRA in SERVER_CONFIG
* Return False on failed connection validation, function order cleanup
* Component manifest
* Missing return None and different way of setting unique_id
* CODEOWNERS update
* CircleCI nudge
* Update config flow to support updating host address
Improve tests
* Update gateway to handle new address signal
* Improve description why whe need to keep step_init
* Corrections and test
* Raise error if does not support setting position
* Raising error for stateless and assumed state covers
* Fix pylint
* Tests
* Update test_trait.py
* Start with Stiebel Eltron heatpump
* STE HP
* Add read of operating mode
* Add read-write operation mode
* Further extract ModBus access
* Separation of platform and API
* Last changes
* Use modbus hub
* Update module doc with config
* Clean up platform code
* Cleanup and update to dev2 of pystiebeleltron
* Remove slave configuration
* Add translation of states
* Make name parameter optional
* Consolidate platform
* Correct .coveragerc after conflict
* Prepare component for sensor platform
* Fix issues found in review
* Remove custom states and map to existing HA states
* Force update, when values are modified
* Update CODEOWNERS and requirements_all.txt
* Fix .coveragerc file
* Exclude stiebel_eltron components in .coveragerc
* Break out to module level constant
* Rename constant
* Removed REQ and DEP constant.
Loading a component defined in a registration didn't actually work and was undocumented, so let's just remove it instead of fixing #23005.
## Checklist:
- [X] The code change is tested and works locally.
- [X] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [X] There is no commented out code in this PR.
* Load dependencies from manifests. Fallback to current DEPENDENCIES
* Fix typing
* Ignore typing correctly
* Split out dependency processing to a new method
* Fix tests
* Only pull from manifest if dependencies is non empty
* Inline temporary function
* Fix light tests [skip ci]
* Fix tests/common
* Fix some mqtt tests [skip ci]
* Fix tests and component manifests which have only one platform
* Fix rflink tests
* Fix more tests and manifests
* Readability over shorthand format
* Fix demo/notify tests
* Load dependencies from manifests. Fallback to current DEPENDENCIES
* Load requirements from manifests. Fallback to current REQUIREMENTS
* Fix typing
* Ignore typing correctly
* Split out dependency processing to a new method
* Only pull from manifest if dependencies is non empty
* Inline temporary function
* Fix tests and component manifests which have only one platform
* Fix rflink tests
* Readability over shorthand format
* Clean up requirements
* Use integration to resolve deps/reqs
* Lint
* Lint
* revert a change
* Revert a test change
* Fix types
* Fix types
* Add back cache for load component
* Fix test_component_not_found
* Move light.test and device_tracker.test into test package instead with manifest to fix tests
* Fix broken device_tracker tests
* Add docstrings to __init__
* Fix all of the light tests that I broke earlier
* Embed the test.switch platform to fix other tests
* Embed and fix the test.imagimage_processing platform
* Fix tests for nx584
* Add dependencies from platform file's DEPENDENCIES
* Try to setup component when entity_platform is setting up
Fix tests in helpers folder
* Rewrite test_setup
* Simplify
* Lint
* Disable demo component if running in test
Temp workaround to unblock CI tests
* Skip demo tests
* Fix config entry test
* Fix repeat test
* Clarify doc
* One extra guard
* Fix import
* Lint
* Workaround google tts
* Bump pyubee to 0.4, support more models and detect model automatically
* Update requirements_all.txt
* Check for supported models
* Add model aliases
* Code clean-up
* Updated code to meet reviewer's requests.
* Updated code to meet reviewer's requests.
* Minor update
* Minor update
* Populate mac2name dict
* Return list of MAC addresses, not dict
Co-Authored-By: mzdrale <mzdrale@gmail.com>
* Minor update
* Fix for network issues
Fix for network issues
* Further changes to network connection
* websession is created in pymyq
websession is created in pymyq instead.
Added call on stop event to close web session.
* Updated requirements file
* Added comment
* Changed back to use aiohttp_client
* Cleanup closed sockets in aiohttp
Enable automatic cleanup of closed sockets in aiohttp client helper.
* Updated manifest & requirements
* Updated comment block
* Ensure we only add a sensor once
* Ensure that we dont process updates for entities that arent what we were setup for
* Add debug logging to ease development of apps
* Use str representation
* Bugfix - binary_sensor.py
* Added features to Concord232 Alarm Panel
* Added New Line End Of File
* Deleted Whitespace
* Back to original
Removed added feature and sticking to bugfix
* Add amcrest binary_sensors
Add binary_sensors with option motion_detected. Deprecate motion_detector sensor.
* Update per review
* Update per review
Add custom validators to make sure camera names are unique, and to issue warning if deprecated sensors option motion_detector is used.
async_setup_platform should not return a value.
* Another review update
Since there is only one type of binary_sensor, remove type test in update method.
* Logi Circle now uses OAuth2 for authentication, added config flow.
* Service calls now dispatched to camera entities via signalled events
* Update from PR review
* Add unit tests for config flow
* Updated CODEOWNERS
* Reverted change to .coveragerc
* Improved test coverage of config flow
* Work on PR comments
* Work on PR comments
* Update imports
* Work on schema validation
* Fix package
* Add bomradarcam to .coveragerc
* Improve error message for location
* Delinting
* Correct module name in .coveragerc
* Add manifest.json
* Update requirements_all.txt
* Merge bomradarcam into existing bom integration
* Added features to Concord232 Alarm Panel
* Update homeassistant/components/concord232/alarm_control_panel.py
Deleted 'or None' as per @syssi suggestion.
* Ensure we only add a sensor once
* Ensure that we dont process updates for entities that arent what we were setup for
* Add debug logging to ease development of apps
* Use str representation
* Added MyLink component
* Updated requirements.txt
* Fix lint issues
* Removed ‘Scene’ functionality
* Removed state restoration, as state is no longer tracked
* Add component manifest
* Remove documentation links in Docstring
* Removed redundant try/except block
* Removed default dict
* Removed features already implemented in default CoverDevice
* Removed attributes for tracking state
* Simplified loading of covers
No options exist other than reversal, so just check reversal status directly and update if needed
* Reimplemented is_closed property
* Import ENTITY_ID_FORMAT from base component
* Removed misc unused vars
* Update module docstrings to one line
* Removed too many blank lines, giving one back :)
* Return none on TimeoutError
* Added component to .coveragerc
* Fix light tests [skip ci]
* Fix tests/common
* Fix some mqtt tests [skip ci]
* Fix tests and component manifests which have only one platform
* Fix more tests and manifests
* Fix demo/notify tests
* Rollback test for demo.geo_location
* Initial version of climate
* initial commit of climate device support
* Fixed opmode and fanmode
* Cleanup
* meh
* added back all other components
Oops
* wider support for thermostats
Added one more identifier for thermostats to broaden compatibility
* Added even more climate types
* Reworked detection mechanism
Better support for combined devices
* Added additional modes
* force visibility on climate
* Changed logging of device data
* Improved operatingmode support
Improved operatingmode support
* Updated logic for opmode/fanmode list creation
Implemented a universal mapping logic for opmode and fanmode, to make it more widely compatible
Improved mapping of Fibaro FGT devices
* Lint fixes
* bump
* Fixes based on code review
* Fixes
* Moved to fibaro folder
* lint inspired cosmetic changes
* Mapped all operating modes to existing HA ones
Mapped all operating modes to existing HA ones
* Improved compatibility with Heatit thermostats
Thanks to astrandb for testing, debugging and fixing my code
* Changes based on code review
Changes based on code review
* more fixes based on more code review
more fixes based on more code review
* Support stream source for doorbird live camera
* Support stream source for doorbird live camera
* Support stream component on Doorbird camera entities
* Bump library version
* Update manifest
* Lint
* Correct parameter order
* Bugfix - binary_sensor.py
* Added features to Concord232 Alarm Panel
* Added New Line End Of File
* Deleted Whitespace
* Back to original
Removed added feature and sticking to bugfix
## Description:
Adds a new `mobile_app` webhook command, `get_zones`, which just returns all zones.
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Added option to use manual authentication for google hangout component
See: https://hangups.readthedocs.io/en/latest/user_guide.html#logging-in for manual log in example
Bumped up version of hangups to 0.4.9
* Updated components/hangouts/strings.json and generated translation string by running script/translations_develop
Reduced verbosity of modifications to components/hangouts/config_flow.py
* Added option to use manual authentication for google hangout component
See: https://hangups.readthedocs.io/en/latest/user_guide.html#logging-in for manual log in example
Bumped up version of hangups to 0.4.9
* Updated components/hangouts/strings.json and generated translation string by running script/translations_develop
Reduced verbosity of modifications to components/hangouts/config_flow.py
* fixing missing rebase
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* changing logic for success and return none
* Update Foscam stream for newer models
* change if to or
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* changing logic for success and return none
* Update Foscam stream for newer models
* change if to or
## Description:
Update the PR template to point requirements to the new manifest requirements.
**Related issue (if applicable):** relates to #22700
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** https://github.com/home-assistant/developers.home-assistant/pull/214
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Add support for services to specify bridgeid
## Description:
Mikrotik does some stupid stuff with character encoding that can screw up the DHCP responses. See #15257 for more detail.
**Related issue (if applicable):** fixes#15257
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Raise ConfigEntryNotReady for connection exception
Raise ConfigEntryNotReady for the connection exception like if the MQTT Server container/device is being restarted or was unavailable on boot.
* Add new exception
* grammar fix
* Possibly resolve hound comments
* raise `ConfigEntryNotReady` for mqtt connection error
* revert exceptions.py
* Update exceptions.py
* modify test to handle exception
* use constants to control exception scope
* Raise ConfigEntryNotReady for connection exception
Raise ConfigEntryNotReady for the connection exception like if the MQTT Server container/device is being restarted or was unavailable on boot.
* Add new exception
* Add new exception
* grammar fix
* Possibly resolve hound comments
* raise `ConfigEntryNotReady` for mqtt connection error
* revert exceptions.py
* Update exceptions.py
* modify test to handle exception
* use constants to control exception scope
* revert test change as it's not the same thing
* Update test_init.py
* Add test for MQTT OSError
* revert file changes from a bad rebase
* Rewrite test with valid syntax
* rewrite test to be less ambiguous
* add empty line
* add back 'axis'
* Remove empty line
* Update tests and undo merge from earlier
* correctly restore test for no connect broker
* fix test mock correctly
* line was too long. hit enter.
* Increase aioharmony version to 0.1.11
Update aioharmony version to 0.1.11, this new update contains fixes for websocket connection losses.
* Update requirements_all
* Set up Circleci workflow
* Update python tag
* Add pre-test job to cache the requirements
* Upgrade pip itself
* Use 3.7 for lint
* Parallelize pylint
* Tweak run gen_requirements_all
* tweak cache key
* Add circleci support
* Add buildpack-deps
* Install libudev-dev
* sudo
* always run test
* Add test report
* no sugar
* quite pytest
* better junit test result
* Add $CODE_COVERAGE env var
* Dont use DATA_ROOM_SETPOINT_OVRD in climate.opentherm_gw as it is unreliable with some thermostats.
* Show new target temperature immediately until the backend notices a change
* Only update target temp on the gateway if the value differs from the current target_temperature.
* Add mobile_app notify platform
* Requested changes
* Fix incorrect param for status code
* Move push_registrations to notify platform file
* Trim down registration information sent in push
* quotes
* Use async version of load_platform
* Add warning for duplicate device names
* Switch to async_get_service
* add mobile_app.notify test
* Update tests/components/mobile_app/test_notify.py
* Update tests/components/mobile_app/test_notify.py
* Add mobile_app notify platform
* Requested changes
* Fix incorrect param for status code
* Move push_registrations to notify platform file
* Trim down registration information sent in push
* quotes
* Use async version of load_platform
* Add warning for duplicate device names
* Switch to async_get_service
* add mobile_app.notify test
* Update tests/components/mobile_app/test_notify.py
* Update tests/components/mobile_app/test_notify.py
* Rebrand Cisco Spark notify to be Cisco Webex Teams
* Remove property from class
* Switch to use html for api
* Update notify.py
* Rename CONF_ROOMID to CONF_ROOM_ID
* updated
* Fix lint errors
* Update notify.py
* Update notify.py
* Also validate room ID
* Update notify.py
* Update .coveragerc
* Update notify.py
* Dont use DATA_ROOM_SETPOINT_OVRD in climate.opentherm_gw as it is unreliable with some thermostats.
* Show new target temperature immediately until the backend notices a change
* Only update target temp on the gateway if the value differs from the current target_temperature.
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* changing logic for success and return none
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* [Hue API] Add color support
Adds color support to the hue api (specifically hue/saturation). Switched from using a tuple to convey state internally to using a dict to make adding new fields easier.
* [Hue API] Add unit test for color support
* Rewrite Osram Lightify component
* Update python-lightify version to 1.0.7.2
* Remove unneeded code
* 1. Remove changes in light/__init__.py, 2. Set properties to None by default
* Fix typo
* Implement missing features (including scenes)
* Make input parameters to setup_platform standardized
* Discovery can update host on existing entries
* Add support in device to update host on entry update
* Fix tests and listener
* Fix hound comment
* Fix failing tests from cleanup
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* changing logic for success and return none
* Use latest client library, evohomeclient v0.3.1
* Fix issue #22097: Failed to call service climate/turn_on...
* BUGFIX: handle case where a Zone doesn't have a temperature
* BUGFIX: missing exception handler, and inappropriate delint hints
* Improve exception handling, and also better messages
* improve code (REDACT secrets); remove TODOs
* minor refactor - improve error message
* more refactoring - improve error message
* remove TODOs
* update to latest evohomeclient library
* Use latest client library, evohomeclient v0.3.1
* Fix issue #22097: Failed to call service climate/turn_on...
* BUGFIX: handle case where a Zone doesn't have a temperature
* BUGFIX: missing exception handler, and inappropriate delint hints
* Improve exception handling, and also better messages
* improve code (REDACT secrets); remove TODOs
* minor refactor - improve error message
* more refactoring - improve error message
* remove TODOs
* update to latest evohomeclient library
* fix requests for houndci-bot
* Tidy up requests exception handling
* Correct lint error
* update to latest client library
* minor de-lint
* more cleanup of exceptions, messages
* refactored for new exception
* fix error in requirements*_all.txt
* de-lint
* delint unused import
* import 3rd-party library only inside methods
* change honeywell tests
* delint, fix typo
* we dont log usernames, passwords, etc.
* de-lint
* Amcrest: Add on/off support & attributes to camera entity. Bump amcrest package to 1.3.0.
Add support for turn_on & turn_off services.
Add implementation of is_recording method, as well as brand, model, hardware_version, machine_name, serial_number, software_build and software_version attributes.
Bump amcrest package to 1.3.0 required for above changes and also handles errors in storage commands which resolves#19982.
* Update per review
Rebase to upstream/dev.
Remove video_enabled property and setter and replace with _enable_video_stream
method.
Remove static attributes from camera and sensors.
* initial commit
initial commit
rewrite tests
fix merge issue with fan component
fix merge issue with fan component
* correct line length
* change to sync_setup_component for tests
* rename services and move services.yaml
* move hepa and carbon filter state from sensor to fan
* add test for duplicate entities
* fix method call tests
* fix docstring
* Add select source support
* Review feedback changes
* Removed unused import
* Ignore 'umused' import used in typing
* Only include trace back on useful errors
* Remove return from play_source
self._brightness max is 255 and hsv brightness max is 100. Assigning 255 based brightness value directly with 100 based hsv reduces brightness eventually to zero.
## Description:
Adds a new `mobile_app` webhook command, `get_zones`, which just returns all zones.
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Update Onvif component to SUPPORT_STREAM
* Update camera.py
* Update camera.py
* Update camera.py
Remove extra spaces.
* lookup URL when camera is added to hass and add extra guards
* Add permission checking to all RainMachine services
* Linting
* Some initial work
* Owner comments
* Test in place (I think)
* Linting
* Update conftest.py
* Update Onvif component to SUPPORT_STREAM
* Update camera.py
* Update camera.py
* Update camera.py
Remove extra spaces.
* lookup URL when camera is added to hass and add extra guards
* Also retry Influxdb at setup()
* Use event.call_later() for retry setup Influxdb
* Fix max line length in setup() in Influxdb
* Add extra space before comment
* Fix sec -> seconds and add return True
* Code Cleanup
- removed unused constants
- more icons on binary_sensor groups
- alligned code for device_state_attributes
- fixed temperature unit origin for weather
* removed icons
* Update Foscam to support stream source
* Removing spaces and tabs
* Changing to Python3-style string formatting
* Adding '_media_port' to hopefully cover other models
* Added transition support for nanoleaf
* Formatting for comments
* Inline comment instead of additional line
* Set color_temp before starting transition
* Option to send pin code with the MQTT payload for MQTT alarm
* publish code via json
Add publish code via json
add code_disarm_required
* publish code via json
Add publish code via json
add code_disarm_required
* implemented command_template
* Fix issue with night arm and add template test
* implemented value_template for mqtt alarm
* Fixed merge errors
* Requested changes
* Resolve lint errors
* Resolve hound issues
* Fix test formatting
* Set up Circleci workflow
* Update python tag
* Add pre-test job to cache the requirements
* Upgrade pip itself
* Use 3.7 for lint
* Parallelize pylint
* Tweak run gen_requirements_all
* tweak cache key
## Description:
Fix a lint issue in credstash script.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
## Description:
Fix a lint issue in credstash script.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
* Add circleci support
* Add buildpack-deps
* Install libudev-dev
* sudo
* always run test
* Add test report
* no sugar
* quite pytest
* better junit test result
* Add $CODE_COVERAGE env var
* Split out mopar into a component and sensor platform
* Add the mopar switch platform
* Add the mopar lock platform
* Clean up and bump version
* Update per review
* Re-add service to trigger horn
* Clean up again
* Don't call async from sync context
* Lint
* Implement changes from review
* Lint
* A little more clean up
* The Great Migration
* removed outdated tests
* Upgraded enturclient to v0.2.0
- client has gone async
- configurable if non boarding departures should be omitted from result
- configurable how many departures should be shown
- more clear which attributes are included and when
* reduced nesting and clearing of attributes
* Removed test data
* ensure attribution and stop id in attributes
* docstring fixes
* fix rebase errors
went a bit too fast on continue on one of the conflicts..
* fix test requirements comment from gen
* Remove check for public key
* Remove has_adb_files, directly call cv.isfile
* Check for missing adbkey.pub, create dummy if not found
* Reorder imports
* Bumped androidtv library version, deactivated pubkey test
* Code works without pubkey, removed function
* Removed "import os", not needed anymore
* Bump library version
## Description:
Current sensor updates run 7 additional SQLite database queries to populate attributes, on top of the bus schedule queries themselves. Double that if you have two sensors. That leads to a lot of slowdowns for everything else when using an SD card!
Considering that some data never changes (agency, routes...) and that others like departure times are good until invalidated, let's fetch such metadata at first then only when relevant changes do occur.
**Breaking Change:**
GTFS sensor attributes are now named using the standard snake_case format.
### Work performed:
- All metadata queries are now cached.
- Metadata queries are now all regrouped in the `update()` method.
- Attributes assembling is now done in ~~`device_state_attributes()` where it belongs.~~ in a utility method called from `update()`, for code clarity and since there is potential I/O from SQLAlchemy.
- As a bonus, many metadata entries with cryptic values have complementary entries added that provide easier to use data:
- .\* Stop Drop Off Type: .\* Stop Drop Off Type **State** -> (string, unknown)
- .\* Stop Pickup Type: .\* Stop Pickup Type **State** -> (string, unknown)
- .\* Stop Timepoint: .\* Stop Timepoint **Exact** -> boolean
- .\* Station Location Type: .\* Station Location Type **Name** -> string
- .\* Wheelchair Boarding: .\* Wheelchair Boarding **Available** -> (boolean, unknown)
- Route Type: Route Type **Name** (string)
- Trip Bikes Allowed: Trip Bikes Allowed **State** -> (boolean, unknown)
- Trip Wheelchair Access: Trip Wheelchair Access **Available** -> (boolean, unknown)
- Attribute names are now using snake_case.
- Added type hints.
**Related issue (if applicable):** fixes#21222
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Remove unused hass parameter for SolarEdgeData
* Add factory to create different types of sensors
Rename SolarEdgeSensor to SolarEdgeOverviewSensor
Rename SolarEdgeData to SolarEdgeOverviewDataService
Remove unused hass parameter in SolarEdgeOverviewDataService
* Add SolarEdgeDetailsDataService to retrieve details data
Add SolarEdgeDetailsSensor to report details data
Add abstract class SolarEdgeSensor
Add details sensor types
* Combine multiple details sensor into one sensor with attributes
* Fix pylint and flake8 errors
* Resolve conflict with solaredge component update
* Add SolarEdgeInventoryDataService to retrieve inventory information
Add SolarEdgeInventorySensor to view inventory information
Add inverters to monitored_conditions
* Fix pylint and flake8 errors
* Add additional monitored variables for solaredge
* Add new sensors to solaredge component
* Add SolarEdgePowerFlowDataService
Add SolarEdgePowerFlowSensor
Add new monitored_conditions for power consumption and grid, load and
solar power production/consumption
* Set entity_id for each sensor based on platform and sensor type
* Fix flake8 and pylint errors
* Add check for connections in return data
* Fix pylint and flake8 errors
* Renamed state_attributes to device_state_attributes
Moved request import to top
* Remove explicit definition of entity_id
* Fix pylint and flake8 errors
* Add check for None before adding sensor
* Update SolarEdgeSensorFactory with initial dict which maps sensor_key to
entity class and data service
* Update attribute values to snakecase
Added stingcase as requirement
* Update requirements_all.txt to include stringcase for solaredge
* Update some initial values for data and unit_of_measurement
Update sensor factory
* Improve fix in c90f0d5 (#22106). Schedule connect coroutine directly on the loop rather than waiting for EVENT_HOMEASSISTANT_START.
* Remove unused import.
## Description:
For RTSP streams, set the `prefer_tcp` FFMPEG flag. This should resolve some of the "green feed" issues that some users are reporting, likely due to packets being lost over UDP on their network.
Resources: [FFMPEG protocols documentation](https://ffmpeg.org/ffmpeg-protocols.html#rtsp)
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* initial commit for camera preferences and preload stream
* cleanup and add tests
* respect camera preferences on each request stream call
* return the new prefs after update
* Set default parallel_update value should base on async_update
* Set default parallel_update value should base on async_update
* Delay the parallel_update_semaphore creation
* Remove outdated comment
* Add import_events(), small refactoring, traccar_id
I isolated the code that imports traccar tracking data and added a new function that imports the traccar events to make them run in parallel and reduce delay. The events that are imported in hass, will be fired with the prefix "traccar_". Furthermore a traccar_id is now imported in hass entities, useful for matching the traccar hass entities with the traccar hass events in the most accurate way.
* bump pytraccar version
* Code format fix
* Code format fix 2
* Code format fix 3
* Implement requested changes
* Add new traccar dependency
* Fix line too long
* Update device_tracker.py
* Update requirements_all.txt
Catch RequestException instead of ConnectionError
In some cases TpLinkDeviceScanner throws various successors of
RequestException. They should be caught.
* Allow panels to indicate they are meant for admins
* Panels to indicate when they require admin access
* Do not return admin-only panels to non-admin users
* Fix flake8
## Description:
This is a follow up to #22171. There we set the name of an entity based on the `accessory-information` homekit service, rather than using the zeroconf/avahi name metadata. Unfortunately Lock also sets its name from zeroconf directly, rather than picking it up from the base class. This test updates it to be like the other homekit entities and use the base class.
(This is from my ongoing homekit_controller configentry branch).
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* removed "from" parameter from ClickSend API call
Removed "from" parameter from API call to let ClickSend choose a random number and be more compliant with some cellular networks that do not allow incoming calls from the same recipient number.
* fixed "line too long (94 > 79 characters)" houndci code review
fixed "line too long (94 > 79 characters)" houndci code review
* Added new component optional parameter "caller".
If defined is used to override default logic that uses recipient phone number in "from" API call parameter
* Removed default value for CALLER parameter. If not defined then will take the RECIPIENT value.
* ecobee: expose detailed equipment status
* Fix#18244 for ecobee by moving current_operation property to current_operation_mode which is more accurate and defining current_operation properly, thanks @ZetaPhoenix
* fix docstring and lint issue
* Revert "fix docstring and lint issue"
This reverts commit d3a645f075.
* Revert "Fix #18244 for ecobee by moving current_operation property to current_operation_mode which is more accurate and defining current_operation properly, thanks @ZetaPhoenix"
This reverts commit bfd90551ef.
* Check if mac is set when more than 2 gateways
When more than 2 gateways mac is required for each of them. Now voluptuous will require it.
* fix line length
* remove trailing whitespace
* Make it more readable
## Description:
Add support for AC-models that follows the Tfiac protocol. Built together with @mellado.
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#8910
## Example entry for `configuration.yaml` (if applicable):
```yaml
climate:
platform: tfiac
host: 192.168.10.26
```
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [x] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [x] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [x] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [x] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [x] New files were added to `.coveragerc`.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
Co-authored-by: Robbie Trencheny <me@robbiet.us>
* Properly connect sensors to hub
Refs #20958
* Don't connect (merge) with main device
* Provide manufacturer
* Linting
* Do connect upnp-sensors to main device
* Linting
* Fix requirements_all.txt
* Turn the TV on via remote
* Turn the TV on via remote
* Use turn_on() from panasonic-viera==0.3.2
* make power option configurable
* add app_power as argument
* formatting
## Description:
For RTSP streams, set the `prefer_tcp` FFMPEG flag. This should resolve some of the "green feed" issues that some users are reporting, likely due to packets being lost over UDP on their network.
Resources: [FFMPEG protocols documentation](https://ffmpeg.org/ffmpeg-protocols.html#rtsp)
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Initial draft
* Add tests for init
Fix hound comments
* Add tests for device
Change parameter handling to make device easier to test
* Remove superfluous functionality per Martins request
* Fix hound comments
* Embedded platforms
* Fix device import
* Config flow retry
* Options default values will be set automatically to options in config entry before component can be used
* Clean up init
Add populate options
Fix small issues in config flow
Add tests covering init
* Improve device tests
* Add config flow tests
* Fix hound comments
* Rebase miss
* Initial tests for binary sensors
* Clean up
More binary sensor tests
* Hound comments
* Add camera tests
* Fix initial state of sensors
* Bump dependency to v17
* Fix pylint and flake8
* Fix comments
## Description:
Passing in a configuration for the embedded MQTT server has been broken for a while. This fixes that. See related issue number for further details.
**Related issue (if applicable):** fixes#18228
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
## Description:
Switches elevation helper to use [Open Elevation](https://open-elevation.com/) instead of Google Maps API which now requires a API key. It's a drop in replacement for Google Maps too!
**Related issue (if applicable):** fixes#19860
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
## Description:
Sort the code oweners list alphabetically.
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
```yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L14
[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard/__init__.py#L23
## Description:
Fix Prometheus casting issues
**Related issue (if applicable):** fixes#8659.
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Return current position and last updated timestamp needed by UI
* Add throttling to position updating
* Simplify logic, don't clear position when refreshing
* Use seconds
* Update homeassistant/components/plex/media_player.py
Co-Authored-By: jjlawren <jjlawren@users.noreply.github.com>
* Add throttling to position updating
* Simplify logic, don't clear position when refreshing
* Fire events with websocket messages.
* Added tests to validate
* Fixed api_streams sensor to use new sensor
* Delete from coverageac as now works.
* Removed websocket request event.
* Use dispatcher instead of events.
* Moved sensor to under websocket_api
* Changes as per code review
* Fixed tests.
* Modified test
* Patch
* Bump python-miio version
* Rename speed property to motor_speed
* Enable set_led service of the Air Humidifier
* Allow a favorite level in [0...17]
* Allow a scene in [0...6]
* Fix breaking on HTML email without images
If using html emails with no images the code breaks since it is not tested for empty (uninitialized) key images.
* fixed long line
* Implemented suggested better solution
Better solution to allow data -> html email without images.
* Protecting data -> without html key from crashing
If the data key does not contain the html key, sending the email would crash this "script". Preventing this by returning an default empty array.
* Moved climate components with tests into platform dirs.
* Updated tests from climate component.
* Moved binary_sensor components with tests into platform dirs.
* Updated tests from binary_sensor component.
* Moved calendar components with tests into platform dirs.
* Updated tests from calendar component.
* Moved camera components with tests into platform dirs.
* Updated tests from camera component.
* Moved cover components with tests into platform dirs.
* Updated tests from cover component.
* Moved device_tracker components with tests into platform dirs.
* Updated tests from device_tracker component.
* Moved fan components with tests into platform dirs.
* Updated tests from fan component.
* Moved geo_location components with tests into platform dirs.
* Updated tests from geo_location component.
* Moved image_processing components with tests into platform dirs.
* Updated tests from image_processing component.
* Moved light components with tests into platform dirs.
* Updated tests from light component.
* Moved lock components with tests into platform dirs.
* Moved media_player components with tests into platform dirs.
* Updated tests from media_player component.
* Moved scene components with tests into platform dirs.
* Moved sensor components with tests into platform dirs.
* Updated tests from sensor component.
* Moved switch components with tests into platform dirs.
* Updated tests from sensor component.
* Moved vacuum components with tests into platform dirs.
* Updated tests from vacuum component.
* Moved weather components with tests into platform dirs.
* Fixed __init__.py files
* Fixes for stuff moved as part of this branch.
* Fix stuff needed to merge with balloob's branch.
* Formatting issues.
* Missing __init__.py files.
* Fix-ups
* Fixup
* Regenerated requirements.
* Linting errors fixed.
* Fixed more broken tests.
* Missing init files.
* Fix broken tests.
* More broken tests
* There seems to be a thread race condition.
I suspect the logger stuff is running in another thread, which means waiting until the aio loop is done is missing the log messages.
Used sleep instead because that allows the logger thread to run. I think the api_streams sensor might not be thread safe.
* Disabled tests, will remove sensor in #22147
* Updated coverage and codeowners.
* Consolidate
* Fix tests
* Update imports
* Fix import
* Use importlib because integration and package share name
* Fix more tests
* Update .coveragerc and CODEOWNERS
* Improve fix in c90f0d5 (#22106). Schedule connect coroutine directly on the loop rather than waiting for EVENT_HOMEASSISTANT_START.
* Remove unused import.
amcrest 1.2.7 now includes camera's configured RTSP port in generated URL. Necessary to make new stream component work correctly if camera does not use default RTSP port.
* Telegram_bot: Allow fetching data from unverified SSL endpoints (#22067)
This patch adds an extra option to the payload that describes the
resource to send to disable the SSL server verification when polling
data from URLs.
* Use the boolean interpretation of the variable directly
Co-Authored-By: nbarrientos <nacho@criptonita.com>
## Description:
**Related issue (if applicable):** fixes#21782
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Register devices into the registry
* Switch to device ID instead of webhook ID
* Rearchitect mobile_app to support config entries
* Kill DATA_REGISTRATIONS by migrating registrations into config entries
* Fix tests
* Improve how we get the config_entry_id
* Remove single_instance_allowed
* Simplify setup_registration
* Move webhook registering functions into __init__.py since they are only ever used once
* Kill get_registration websocket command
* Support description_placeholders in async_abort
* Add link to mobile_app implementing apps in abort dialog
* Store config entry and device registry entry in hass.data instead of looking it up
* Add testing to ensure that the config entry is created at registration
* Fix busted async_abort test
* Remove unnecessary check for entry is None
* Update location schema
* Generate a random device ID at registration time for later use with device_tracker.see
* Remove host name from device_tracker.see payload
* Drop consider_home from the payload
* Remove stale consider_home in schema
* Remove source_type
## Description:
**Related issue (if applicable):** fixes#21758
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
## Description:
**Related issue (if applicable):** fixes#21782
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
* Register devices into the registry
* Switch to device ID instead of webhook ID
* Rearchitect mobile_app to support config entries
* Kill DATA_REGISTRATIONS by migrating registrations into config entries
* Fix tests
* Improve how we get the config_entry_id
* Remove single_instance_allowed
* Simplify setup_registration
* Move webhook registering functions into __init__.py since they are only ever used once
* Kill get_registration websocket command
* Support description_placeholders in async_abort
* Add link to mobile_app implementing apps in abort dialog
* Store config entry and device registry entry in hass.data instead of looking it up
* Add testing to ensure that the config entry is created at registration
* Fix busted async_abort test
* Remove unnecessary check for entry is None
* Update location schema
* Generate a random device ID at registration time for later use with device_tracker.see
* Remove host name from device_tracker.see payload
* Drop consider_home from the payload
* Remove stale consider_home in schema
* Remove source_type
## Description:
**Related issue (if applicable):** fixes#21758
## Checklist:
- [x] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [x] There is no commented out code in this PR.
For example Discord webhooks returns a 204 success code as response, which gets logged as an error in the log, even though it is successful.
Update the allowed statuses to accept all 2xx responses as successful.
* Cleaned up named sensor handling for future
Breaking change for tellstick sensor configuration.
* Fixed linting of long lines and closing bracket
Linting warning for long line and not using best practice for visual indentation of closing bracket.
Who's a good boy..
* Whitespace on line was not cleaned.
* Removed spaces to clean up
* More.. whitespace. Sloppy.
* Constants from const, altered loops, added dictionary for sensor names.
* Fixed whitespace
* Inverted condition and created guard clause
* Changed condition from not ... in to not in.
* Fixed bad indentation on L91 and 92
* Working on adding androidtv functionality to firetv component
* 'should_poll' must return True
* Change 'properties' to 'device_properties'
* Also mention 'Android TV' in services.yaml
* Use GitHub for 'androidtv' requirement
* Add 'androidtv==0.0.10' to requirements, remove 'firetv==1.0.9'
* Add 'GET_PROPERTIES' adb command option; use pypi for REQUIREMENTS
* Rename integration from 'firetv' to 'androidtv'
* Change default name to 'Android TV'
* Rename integration from 'firetv' to 'androidtv'
* Change firetv to androidtv in .coveragerc
* Change firetv to androidtv in requirements_all.txt
* Remove 'DEFAULT_APPS'
* Update registration schema to add os_name (required) and make app_name required
* Ensure that a provided app_component is valid and available
* Ensure that component DEPENDENCIES declares mobile_app
* Update homeassistant/helpers/config_validation.py
* Standardize error responses
* Dont generalize REGISTER_BAD_COMPONENT
* Fix tests after merge
* bug fixing for MagicHome LEDs with flux_led component.
* corrections of the fixes for flux_led
* now asyncio sleep and turn on with brigthness possible
* indention fix with flux_led
* async now works
* houndci fixes
* little fixes for flux_led
* self._color fix for flux_led
* Add docstring
Assume a snapshot state with three speakers in two groups, AB and C. They will
be playing the A and C queues, respectively. The B queue exists but is hidden
in this topology.
Unjoin B and form a new group BC, playing the B queue (now with the C queue
hidden).
To restore the snapshot we would join B back to A. The BC group would now only
contain the C speaker, still playing the B queue. The C queue has been lost :-(
The problem is that unjoining a coordinator will elect a new coordinator that
inherits the group queue and thus has its hidden queue overwritten.
This commit avoids the situation by having restore unjoin all slaves. Above, C
would be unjoined before joining B to A. This restores the C queue and since B
is then alone, it can be joined to A without having to transfer its playing
queue to remaining speakers.
* initial commit of streams
* refactor stream component
* refactor so stream formats are not considered a platform
* initial test and minor refactor
* fix linting
* update requirements
* need av in tests as well
* fix import in class def vs method
* fix travis and docker builds
* address code review comments
* fix logger, add stream start/stop logs, listen to HASS stop
* address additional code review comments
* beef up tests
* fix tests
* fix lint
* add stream_source to onvif camera
* address pr comments
* add keepalive to camera play_stream service
* remove keepalive and move import
* implement registry and have output provider remove itself from stream after idle, set libav log level to error
Nanoleaf component now supports both nanoleaf lights, Aurora and Canvas
Changed the dependency to pynanoleaf, nanoleaf does not seem to be
maintained anymore
* Don't hang forever if manually added cast is down
* Adapt to pychromecast
* Do not set available until connected
* Update __init__.py
* Update requirements
* Lint, tests
* Fix tests
* Deprecated http.api_password
* Deprecated ApiConfig.api_password
GitHub Drafted PR would trigger CI after changed it to normal PR.
I have to commit a comment change to trigger it
* Trigger CI
* Adjust if- elif chain in auth middleware
## Description:
* Bump version to latest version of pyvlx: 0.2.10. Library more failure tolerant, when detecting an unsupported device.
* When calling API (e.g. run scene, change position) don't wait until device has reached target position (This caused HASS to be flaky while the device was moving)
* Support for vertical and horizontal awnings.
* timediff is of type timedelta. Divide by timedelta does not work.
- convert a timedelta to int
- make sure the test inputs real timestamps
* Convert the total_seconds to decimal and round the result
readings are of type Decimal, so fix test to reflect that
* split line into multiple statements
Line too long
* use total_seconds instead of timediff
* Make both values float instead of Decimal
* First webhook commands for getting and deleting single registrations
* Keep a list of deleted webhook IDs so we can 410 if the webhook receives traffic in the future
* Return a empty JSON object instead of None
* Split up mobile_app bits into individual files
* Add typing
* Sort keys
* Remove unused async_setup_entry
* New decorator method of registering webhooks
* Add tests for cloud hook forwarding and improve error handling for cloud hooks
* Initial implementation of platform specific logic
* Add get registrations by user ID websocket call, minor style fixes
* Stop using resp dictionary during registration
* Move mobile_app/ios.py to ios/mobile_app.py
* Log any errors encountered during webhook
* Improve update registration call
* Split up mobile_app tests to match split up component
* Fix tests
* Remove integration_map in favor of component name in registration
* Add a few helper functions for custom logic components to use
* Load the app_component platform at device registration or component setup time
* Remove extraneous function
* Use guard function for checking if component is in device
* Inline websocket schemas
* Rename ATTR_s used in storage to DATA_ prefix
* squash flake8 and pylint issues
* Remove ios.mobile_app platform
* Dont mark websocket_api as a dependency
* Return standard empty_okay_response with 400 if no JSON sent
* Ensure deleted webhook IDs are registered at launch
* Remove the creation of cloudhooks during handle_webhook
* Rename device to registration everywhere applicable
* Dont check if cloud is logged in, just check if cloud is in components
* Dont ever use cloudhook_id
* Remove component loading logic for a later PR
* Cast exception to string
* Remove unused functions
* fix empty TOPIC_BASE issue
if the value of the TOPIC_BASE is empty then we need to remove "~" from the topic value if it exists.
by doing `if base:` on line 239 the condition will be false if the value is empty so the '~' will not be stripped from the topic value.
I simply removed the `if base:` line and added `if TOPIC_BASE in payload:`
* Update homeassistant/components/mqtt/discovery.py
Co-Authored-By: engrbm87 <engrbm87@gmail.com>
* Quick return if attr is null
There are some case where attr is null. Returning null doesn't change anything (in my case this is mapped to a volume that doesn't exist, not sure what others are seeing).
If you have confirmed you hass instance for C instead of F you do not see this error.
* update == to is
* whitespace
* Move cisco me to new layout
* Add docstring
* Move items out of init method and pass the controller instance to the scanner in get_scanner
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Update homeassistant/components/cisco_mobility_express/device_tracker.py
Co-Authored-By: fbradyirl <fbradyirl@users.noreply.github.com>
* Fix build error
* Cleanup based on comments.
* Add Time of Flight Sensor using VL53L1X
* Fix issues found by bot
* Fix issues from bot
* Remove extra logs
* Keep removing logs dependencies not used
* Remove log from update
* Add logger info to async_update
* Fix over-indented line
* Fix pylint error
* Remove logger reporting successful operation
* Update requirements
* Update requirements_all.txt
* Update requirements_test_all.txt
* Used isort to keep imports and added STMicroelectronics to docstring
* Replace time.sleep by asyncio.sleep
* Add requirements to COMMENT_REQUIREMENTS and fix typo
* Using async_add_executor_job to schedule the call in the pool
* Fix typo
* Optimize async_update
* Updated requirements files
* Group and schedule calls that should be run sequentially
* Fix lint errors
* Revision showing development history
* Cleaning and typos
* Cleaning and typos
* Fix wrong-import-order
* Fix gen_requirements_all
* Schedule rpi_gpio I/O on the executor thread pool
* Fix partial parameters
* Fix bot error - add blank line
* Fix lint error
* Remove dependencies from requirements
* Review initial commits
* Move all device I/O to async_update
* Update requirements_all.txt
* Revised header with no url to the docs
* Use async_added_to_hass to add and initialize the sensor
* Add docstring to init()
* Move sensor.open() to async_setup_platform
* Remove logging and async
* Fix typo
* Move sensor.open to safe initialization
* Fix typo
* Fix typo
* Add the new tof module to .coveragerc
* Move the sensor platform under a tof package
* Update .coveragerc and requirements_all for tof package
* Fix Name of Accesspoint if name is configured
* fix lint
* Simplyfied naming
* applied suggestion
Co-Authored-By: SukramJ <markus@mm-jankowski.de>
* update comment
* Fix Name of Accesspoint if name is configured
* fix lint
* Simplyfied naming
* applied suggestion
Co-Authored-By: SukramJ <markus@mm-jankowski.de>
* update comment
* Added updating alarm state after start of the HA. Still rough and dirty.
* Fixed initialization of the panel and binary sensor. Before cleanup.
* Added alarm clearing, linting fixes.
* Removed dead code, added style changes.
* Updated requirements
* Fixed linting errors.
* Fixed linting errors
* Fixed linter errors.
* Fixed hopefully last linter errors.
* Fixes after code review, imports sorted.
* Removed init debugging
* Start preparing for homekit_controller config entries
* Review feedback
* Review feedback
* Only use the vol.strip validator for pairing_code
* CV not required now
* Changes from review
* Changes after review
The REST notification component only allows 200 + 201 as a successful
response code to the submission. notify.me returns a 202 (Accepted)
response, which works fine but gets logged as a warning in the log.
Update the allowed statuses to treat the 202 as ok.
* Serialize snapshot commands and bump amcrest package to 1.2.4
Attempting to send a snapshot command when a previous one hasn't finished will result in warnings and/or errors. This can happen when the camera picture is clicked on in the frontend, resulting in the thread that updates the thumbnail in the background every 10 seconds to sometimes collide with the thread that updates the large picture in the foreground quickly. An automation that calls the camera.snapshot service in yet another thread can make the situation worse. Fix by adding a thread lock to serialize snapshot commands. Also bump the amcrest package to 1.2.4 which fixes error handling in the command method and improves performance by reusing requests sessions.
* Update amcrest package to 1.2.4
* Initial pass of a mobile_app component
* Fully support encryption, validation for the webhook payloads, and other general improvements
* Return same format as original API calls
* Minor encryption fixes, logging improvements
* Migrate Owntracks to use the superior PyNaCl instead of libnacl, mark it as a requirement in mobile_app
* Add mobile_app to .coveragerc
* Dont manually b64decode on OT
* Initial requested changes
* Round two of fixes
* Initial mobile_app tests
* Dont allow making registration requests for same/existing device
* Test formatting fixes
* Add mobile_app to default_config
* Add some more keys allowed in registration payloads
* Add support for getting a single device, updating a device, getting all devices. Also change from /api/mobile_app/register to /api/mobile_app/devices
* Change device_id to fingerprint
* Next round of changes
* Add keyword args and pass context on all relevant calls
* Remove SingleDeviceView in favor of webhook type to update registration
* Only allow some properties to be updated on registrations, rename integration_data to app_data
* Add call service test, ensure events actually fire, only run the encryption tests if sodium is installed
* pylint
* Fix OwnTracks test
* Fix iteration of devices and remove device_for_webhook_id
* Add SmartThingsAccelCluster to binary_sensor
* Make corrections per discussion with @dmulcahey
* Add missing const to gateway.py
* Remove Acceleration from no sensor
* mvp basic temperature sensor support
* support for DHT temperature & humidity
* add support for ds18b20 sensors
* improve resolution of device settings
* update requirements_all.txt
* re-organize new file
* don't use filter(lambda: syntax
* set unique_id on entities to allow renaming in the UI
* leverage base Entity module to do C to F conversion
* add option for setting poll_interval
* use handler pattern to handle updates from Konnected device
* cleanups from code review
* node descriptor implementation
add info to device info
disable pylint rule
check for success
* review comments
* send manufacturer code for get attr value for mfg clusters
* ST report configs
* do zdo task first
* add guard
* use faster reporting config
* disable false positive pylint
* fix derived rate, fixes#20097
* fix derived rate, fixes#20097
* Fix typo
thnx @amelchio
* Make the test more realistic
Took values from my own smart meter for the test
* Update test to ignore rounding issues
* climate/netatmo: Added support for muletiple thermostats/valves
* Adjusted the update interval throttle to 10 seconds
* Avoid returning 'homes' without 'therm_schedules'
* Requires home to have 'modules' as well as 'therm_schedules'; Using pyatmo 1.7
* Support multiple homes
* Fix nest level too deep issue
* Fix crashing bug when discovery is true
* Fix crashing bug when discovery is true
* Modifications according to review comments
* Resolve format issue
* Fix mode name issue
* Revisions according to review's suggestions
* Revisions according to review's comments
* Revisions according to review's comments
* Update requirements
Updated requirements
* Small bump for aioharmony
Small version bump increase for aioharmony
* Add attributes
Add firmware and config version attributes
* Add hold for button press on send_command
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Revert rebase changes
Revert some changes that should have been reverted back as part of rebase.
* Updated based on review
Removed HOLD_SECS from platform schema (configuration)
Updated getting kwargs in async_send_command
Updated debug log to include delay_secs
* do not report on 0x1000 LightLink cluster
* don't flood Zigbee network during configuration or initialization
* add lifeline of 60 minutes to lights
* use ootb polling
* Change dependency to pyvesync-v2 for vesync switch
* Update requirements_all.txt
* Update Version - Wall Switch Support
Update required version for vesync outlets and switches. Eliminate API call for energy usage for wall switches that do not have that feature
* fix name convention
* Initial pass of a mobile_app component
* Fully support encryption, validation for the webhook payloads, and other general improvements
* Return same format as original API calls
* Minor encryption fixes, logging improvements
* Migrate Owntracks to use the superior PyNaCl instead of libnacl, mark it as a requirement in mobile_app
* Add mobile_app to .coveragerc
* Dont manually b64decode on OT
* Initial requested changes
* Round two of fixes
* Initial mobile_app tests
* Dont allow making registration requests for same/existing device
* Test formatting fixes
* Add mobile_app to default_config
* Add some more keys allowed in registration payloads
* Add support for getting a single device, updating a device, getting all devices. Also change from /api/mobile_app/register to /api/mobile_app/devices
* Change device_id to fingerprint
* Next round of changes
* Add keyword args and pass context on all relevant calls
* Remove SingleDeviceView in favor of webhook type to update registration
* Only allow some properties to be updated on registrations, rename integration_data to app_data
* Add call service test, ensure events actually fire, only run the encryption tests if sodium is installed
* pylint
* Fix OwnTracks test
* Fix iteration of devices and remove device_for_webhook_id
* Add support for separate on/off ids on manual configured IHC lights.
This makes it easier to support IHC code units thats relies on being
turned on and off through specific inputs.
Also adds a pulse service (ihc.pulse) that supports sending a short on/off pulse to an IHC input.
* Fix
* Lint fix
* Add on/off id support in switch
* Make pulse async
* Code review fixes
* Added value_template config for parsing json value from state topic
Added arm_code_required to avoid code enter when arming
* Renamed config parameter to code_arm_required
* Fix for discovery update compatibility
* Fixed lint error
* Added test
* Register 'media_player.firetv_adb_cmd' service
* Wrap the 'firetv_adb_cmd' service with 'adb_decorator'
* Address reviewer comments
* Move firetv to its own platform
* Move 'adb_command' service description
* Rename DOMAIN to FIRETV_DOMAIN
* Import KEYS in __init__ method
* Change 'self.KEYS' to 'self.keys'
* Update firetv in .coveragerc
* 'homeassistant.components.media_player.firetv' -> 'homeassistant.components.firetv'
* 'homeassistant.components.firetv' -> 'homeassistant.components.firetv.media_player'
* add device_info to device
* added checks
* Fixes based on feedback
* Fix spelling
* Simplified implementation
On homematicip devices and the ap are created
* small fix with device.id
* hub/ap device creation moved to __init__.py
* Fixed result handling
* fixes after review.
* Fix test
* Refactor async_turn_on() for ZHA Light.
Use "move_to_level_with_on_off" if brightness or transition attributes
are present in the service call data, otherwise issue "On" Zigbee
command.
Allow brightness of 0 for service call -- effectively turning the light
off.
Send color commands only after the light was turned on.
* Fix zha.light tests.
* Fix HomeKit missing humidity issue
When using HomeKit components, MiTemp BT's humidity state will not display in Home.app.
After Added home-assistant device class into property, this problem is solved.
* Add Device_Class_Battery to property
* Break long lines.
* Lint
* Add the destination stations to the attributes
* Add support for showing station on map
* Add option to exclude via connections
* Cleanup the live sensor
* Perform better checking against false i/o None values
* Add support for excluding vias
* Add more details for via trains
* Lint file
* Update logger level
* 🚜 Rewrite of Toon component
* 🔥 Removed manual state from list
* 👕 Addresses code review comments
* 🔥 Removes a log line that should not have been left behind
* 👕 Addresses linting warnings
* 👕 Addresses Hound CI warning
* 👕 Fixes small code styling issues
* ✨ Sets an appropriate SCAN_INTERVAL
* ✨ Sets min/max temperature for climate platform
* 👕 Makes imports more consistent with codebase
* 🚑 Fixes incorrect SCAN_INTERVAL value in climate platform
* 🚑 Uses OrderedDict for config_flow schema
* 👕 Adds return types for min/max temp
* 🚜 Refactors entities into their actual devices
* ⬆️ Updates toonapilib to 3.0.7
* 🚜 Refactors binary sensor state inversion
* 🚑 Fixes states of OpenTherm connection and Hot Tap Water
* ✨ Adds Boiler Preheat binary sensor
* ✨ Adds Toon Thermostat Program binary sensor
* ✨ Adds Boiler Modulation Level sensor
* ✨ Adds Daily Power Cost sensor
* 🔥 Cleanup of Toon Thermostat climate attributes
* 🚜 Adjusts config_flow with Tenant selection
* 🙋 Adds myself to codeowners file as maintainer
* ⬆️ Gen requirements
* ⬆️ Updates toonapilib to 3.0.9
* ☔ Adds config_flow tests
* Add additional device classes to Cover component; Add SmartThings cover platform; Improve lock test coverage
* Enhance cover platform to support position and battery level reporting.
* Add additional classes
* Removed device class descriptions
* Updates based on review feedback
* Add test case for closed
* Bump firetv to 1.0.8
* Update the 'update' function for Fire TV
* Return None for properties when unavailable
* Remove 'self.adb_lock' attribute
* Remove threading import
* Update configuration for Fire TV component
* Clarify 'python-adb' vs. 'pure-python-adb'
* Rename '__adb_decorator' to '_adb_exception_catcher'
* Don't check 'self._available' in properties
* Bump firetv to 1.0.9
* Switch to SCAN_INTERVAL instead of throttle
This allows forced update of state
* Don't change tv on/off state in services
* Drop unused variables
* Only send mute if different from current state
* No need to update variables, will behandled on update
* Drop unused import
The Velux ACTIVE gateway uses `C#` rather than `c#` as the name of
the property that holds the count of accessories. Apple's HomeKit docs
suggest that properties should be case-insensitive, so update the
code to not assume the property names are lower case.
* Generate new sensors for discogs:
- Generate collection sensor
- Generate wantlist sensor
- Generate random record sensor
- Removes the option to set a name
* Make it so name can still be configured
* Fix invalid syntax
* Use shared data object + 1 sensor
* Linting
* Remove straying comment
* Dont use async for non-async stuff
* Don't use separate list for conf already in dict
* Use consts for keys
* Copy dict to list for sensors
* Fix syntax for computed keys in SENSORS dict
* Adding custom and zone cleaning to Neato Vacuums
* Fixing line length and missing imports
* Line too long
* Adding details to the custom service
* Fix linting issues
* Reverting ACTION
* Code cleanup
* Typo
* Requested modifications
* Changing the custom service domain
* No service schema depency anymore
* Removing useless code
* Linting
* Requested changes
* Requested changes for domain
* Revert the service domain back to vacuum
* Move iperf3 sensor to a standalone component
* Split out iperf3 into a component with a sensor platform
* Update coverage and requirements
* Add services.yaml
* Clean up a little bit
* Lint
* Lint
* * bump pip module version.
* moved named tuple into the module.
* pass SSL bool into the object init.
* support get_extra_attributes
* Update homeassistant/components/device_tracker/luci.py
* Allow the utility_meter to net meter rather than only allow increases.
* Fix PR issues around CI.
* Fix line length fallout.
* Change rollover to net_consumption. Add unit tests.
* Fix test style issues.
* Fix style in tests.
* Add LCN cover platform
* Removed unused default value
* Moved cover component to lcn platform directory. Small changes due to change request
* Closed state is set before updating
* Remove unneeded returns from handle_update()
* Start __init__() params with hass.
* Remove excess logging and downgrade remaining logging.
* Remove period from end of comment
* Decorate callback with @callback
* Use more descriptive variables than key and value.
* Inherit from BinarySensorDevice and overwrite is_on rather than state.
* Removed uncheckedreturn values.
* Use super() rather than explicit object.
* Use add_entities instead of add_devices.
* Don't use listener when calling immediately.
* Remove some excess logging.
* Switch to sync since pycarwings2 is sync.
* Remove RuntimeError exception matching.
* Add temporary reviewer comments.
* Add UI help descriptions for update service.
* Fix hound errors.
* Replaced time.sleep() with await asyncio.sleep()
* Removed location_updateon_on attribute since on device_tracker.
* Use async_added_to_hass() and async_dispatcher_connect().
* Use dict[key] because schema key is required.
* Clarify variable names.
* Remove icon for charging switch.
* Convert LeafChargeSwitch into service and sensor.
* Use async_dispatcher_send().
* Add guard checks for discovery_info. Consistent logs.
* Use async_schedul_update_ha_state().
* Device tracker should return true.
* Remove icon for climate control.
* Really remove icon for climate control.
* Use register() instead of async_register().
* Add guard on device tracker if discovery_info is None.
* {switch,light}.tplink: use deviceid as unique id, fetch name from the device during initialization
* raise PlatformNotReady when no device is available
* Use mac instead of deviceid
* remove name option as obsolete
* Add support for configuration flow / integration
Allows activating automatic discovery of supported devices from the configuration
* Fix linting, update requirements_all.txt
* start cleaning up tplink component based on feedback
* add device info, improve config handling
* Allow overriding detected devices via configuration file
* Update requirements.txt
* Remove debug logging
* make hound happy
* Avoid I/O during init and simplify the code, remove remains of leds_on
* Fix issues based on feedback, use consistent quotation marks for device info
* add async_setup_platform emiting a deprecation warning
* Avoid blocking the I/O, check for None on features
* handle some Martin's comments, schema-validation is still missing
* use async_create_task instead of async_add_job, let core validate the schema
* simplify configuration handling by storing the configuration data separately from initialized instances
* add default values to schema, make hound happy
* with defaults set by schema, simplify the checks. add async_unload_entry
* Use constant for data structure access
* REWORD add a short note about async_unload_entry
* handle feedback from Martin, config_data is checked against Noneness
* use pop to remove the domain on unload
* First steps to add tests for the new tplink component
* embed platforms under the component directory
* Fix tests by mocking the pyhs100 internals
* Fix linting
* Test against multiple instances of devices, tidy up
* (hopefully) final linting round
* Add pyHS100 to test requirements
* log always the warnings occured during an update to make them easy to see
* revert back the warning behavior (requirement for silver level in IQS)
* Unload only when an entry is being loaded and add tests for that
Thanks @MartinHjelmare for pointing this out!
* Fix linting
* Bump the upstream lib, fixes most prominently the HSV setting on bulbs
* Test unloading for all platforms, clear the data storage instead of popping it out, making it possible to reconfigure after removal without restarting hass first
* Use class variables instead of instance variables for bulb states, required for HS220
* Use new-style format string
* Fix indenting, uppercase the mock constant
* Run black on test_init, hopefully that will finally fix the weird formatting (pycharm, pylint and hound seems to have different opinions...)
* Add a prompt if bridge update is available.
* Change logger warning for light update
The self.light.swupdatestate only checks for updates of that specific light, it does not check for updates of the bridge.
Theirfore the warning message schould be updated.
* add space
* fix tests
* rename to swupdate2_bridge_state
* update aiohue to v1.9.1
* update aiohue to v1.9.1
* update aiohue to v1.9.1
* Fix for #19072
PR #19072 introduced the custom_effect feature but it didnt make it optional as the documentation states.
This causes error on startup and the component does not work.
```
Error while setting up platform flux_led
Traceback (most recent call last):
File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/helpers/entity_platform.py", line 128, in _async_setup_platform
SLOW_SETUP_MAX_WAIT, loop=hass.loop)
File "/usr/lib/python3.5/asyncio/tasks.py", line 400, in wait_for
return fut.result()
File "/usr/lib/python3.5/asyncio/futures.py", line 293, in result
raise self._exception
File "/usr/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/light/flux_led.py", line 135, in setup_platform
device[CONF_CUSTOM_EFFECT] = device_config[CONF_CUSTOM_EFFECT]
KeyError: 'custom_effect'
```
Changing this line to make the custom_effect optional as the original intention.
* Update flux_led.py
* Improve component setup error logging/notification
* Prevent capabilities from being represented my multiple platforms
* Improved logging of received updates
* Updates based on review feedback
* Fix for #19072
PR #19072 introduced the custom_effect feature but it didnt make it optional as the documentation states.
This causes error on startup and the component does not work.
```
Error while setting up platform flux_led
Traceback (most recent call last):
File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/helpers/entity_platform.py", line 128, in _async_setup_platform
SLOW_SETUP_MAX_WAIT, loop=hass.loop)
File "/usr/lib/python3.5/asyncio/tasks.py", line 400, in wait_for
return fut.result()
File "/usr/lib/python3.5/asyncio/futures.py", line 293, in result
raise self._exception
File "/usr/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/light/flux_led.py", line 135, in setup_platform
device[CONF_CUSTOM_EFFECT] = device_config[CONF_CUSTOM_EFFECT]
KeyError: 'custom_effect'
```
Changing this line to make the custom_effect optional as the original intention.
* Update flux_led.py
* Fix#20900: RSSI_PEER and RSSI_DEVICE are different things
This change is fixing issue #20900.
Wireless actors are having two RSSI values. The way the component was programmed one of them was overwritten.
* Added deprecation comment
* Fixed long line
* Fix: pylint comment
* Lint
* flake8
* flake8 again
* Update __init__.py
* Add traccar monitored_conditions option
User defined additional parameters to track from the traccar platform
* Version bump for pytraccar client
* Update traccar.py
* Remove default value
* Update homeassistant/components/device_tracker/traccar.py
Co-Authored-By: lapy <lapy@users.noreply.github.com>
* Update traccar.py
* Deprecate update_interval and replace with scan_interval
* Update tests
* Fix Darksky tests
* Fix Darksky tests correctly
This reverts commit a73384a223ba8a93c682042d9351cd5a7a399183.
* Provide the default for the non deprecated option
* Don't override default schema for sensors
* Deprecate update_interval and replace with scan_interval
* Update tests
* Fix Darksky tests
* Fix Darksky tests correctly
This reverts commit a73384a223ba8a93c682042d9351cd5a7a399183.
* Provide the default for the non deprecated option
* Don't override default schema for sensors
* Add index parameter to scrape sensor
The scrape sensor selects the first element of the list returned by
BeautifulSoup. This commit adds an optional index parameter to allow the
selection of a different element from the list of results. To make this
a non-breaking change, if no index value is configured, the sensor
defaults to the previous behaviour of returning the first element.
* Set default value for index to avoid later checks
This sets the uvloop version in Docker containers to 0.11.3, which is the
same version that hass.io uses.
uvloop might be causing issues with some Docker containers on some host
systems, as reported in #20829
This sets the uvloop version in Docker containers to 0.11.3, which is the
same version that hass.io uses.
uvloop might be causing issues with some Docker containers on some host
systems, as reported in #20829
* Updated per review feedback.
* Fixed line length
* Review comments and lint error
* Fixed mypy typeing error
* Moved migration logic to setup
* Use new migration error state
* Fix bug and ignore mypy type error
* Removed SmartThings example and added unit tests.
* Fixed test comments.
* Improve component setup error logging/notification
* Prevent capabilities from being represented my multiple platforms
* Improved logging of received updates
* Updates based on review feedback
* Add switch platform for Danfoss Air and additional sensors.
* Solve lint issues.
* Correct style.
* Minor changes
* Minor changes
* Minor changes
* Update file header
* Remove space
* Remove space
* Added work so far.
* Change interval so nobody drains their battery when I put this online
* Added the warning notice.
* Async setup
* Still broken, but we're getting there.
* Back to synchronous, moved refresh stuff into DataStore
* Functional sensors!
* Added working switches, tweaked intervals a bit
* Fixed turn off result
* Moved plug status to binary_sensor, added smart intervals
* Documentation and car nickname stuff
* Syntax fixes and coveragerc additions
* Style fixes
* Fixing the final line length
* Fixed an issue with newer models and bad climate data
* Forgot to check my line endings.
* New icons for most of the components
* Hotfix for handling Nissan's awful servers
* Merge in fixes made by Phil Cole
Remove invalid FIXMEs and update TODOs
Fixes for pylint and test for CarwingsError exception rather than Exception
Flake8 fixes
Add pycarwings2 to requirements_all.txt
Add extra configuration documentation.
Use pycarwings2 from pip. Check server dates between requests.
Add sensor device class for battery.
Async conversion fixes
flake8 fixes and docstrings
Non-async charging is OK
Handle multiple cars in the configuration
Convert to async. Better imports for platforms
Fix scanning interval & prevent extra refreshes. async switchover
Check discovery_info to prevent load of platforms
Ensure update frequency is always above a minimum interval (1 min).
Platforms don't have return values
Use values() instead of items() when not using key
Use snake_case (LeafCore becomes leaf_core)
commit 418b6bbcc49cf2909aac85869440435410abf3fd
* Add pycarwings2 to requirements_all.txt
* Make stopping charge error an 'info'. Remove TODO.
* Request update from car after sending start charging command.
* Delay initial (slow) update for 15 seconds and make async
* Flake8 line length fixes
* Try to fix D401 'imperative mood' git diff tox errors
* Try to fix more D401 'imperative mood' tox errors
* Default interval of an hour in code, to match comments.
* Update to pycarwings2 2.3
* Update to pycarwings2 2.3 in requirements_all.txt
* Remove documentation, instead refering to home-assistant.io
* Remove unneeded dispatcher_send()
* Remove unneeded requirements comments
* Combine excess debugging.
* Remove single line method signal_components()
* Bump to version 2.4 of pycarwings2
* Remove unused dispatcher_send
* Simplify logging of LeafEntity registration
* Update requirements_all.txt
* Multiple changes
Increase timeout to 30 seconds
Only consider battery_status
Fix plugged in status
Better attempts at try/exception handling
* Fix line length
* Use pycarwings 2.5
* Remove pointless 'is True'
* Remove unnecessary 'is True/False'
* Remove unnecessary 'is True/False'
* Use LENGTH_MILES and LENGTH_KILOMETERS
* Remove excess logging in setup_platform()
* Remove unnecessary 'is True'
* Use pycarwings2 version 2.6
* Require pycarwings2 version 2.7.
* Increase sleep delay for climate and location reponses.
* Remove unnecessary 'is True'
* Increase frequent polling warning to _LOGGER.warning()
* Use DEVICE_CLASS_BATTERY
* Remove extraneous 'is True'.
* Move icon strings to constants.
* Remove unneeded key.
* LeafRangeSensor ac_on property is internal.
* Flake8 missing line
* Remove homebridge attributes.
* Remove round battery % and range to whole numbers
* Use pycarwings2 2.8
* Move to embedded component model
* Reduce maximum attempts to 10 (5 mins)
* Include attempt count in 'waiting' log message
* Use await instead of yield. Remove @asyncio.coroutine decorators.
* Add @filcole as nissan_leaf codeowner
* Fix checking for if not data returned from vehicle. Don't double send signal on location update.
* Exposed updated_on, update_in_progress and next_update attributes.
* Add nissan_leaf.update service that triggers an update.
* Flake8 line fixes
* Remove excess and double logging.
* Add updated_on attribute for device tracker.
* Fix crash if pycarwings2 doesn't provide cruising ranges.
* Minor changes
* Minor changes
* Minor changes
* Minor changes
* Minor changes
* First commit
* Times of the Day binary sensor added
* Python 3.5 fixes and logging removed
* Code refactored according to reviewer's suggestions
* Fixed config template with friendly name support
* Finall pep8 fixes
* Removed async_generate_entity_id and moved initial calculation to async_added_to_hass
* Change the configuration schema to follow the current requirements
* Update according latest suggestsion
* Fix typos and minor changes
* Fix lint issue
* initial working example of alarm_control
* fixes for alarm_control
* arm home is the same as arm away
* updated documentation
* final fixes
* pypoint version up
* fixes for Martin
* new weather component for meteofrance
* linting
* upgrade meteofrance package version
* Update .coveragerc
* Remove updates to the weather component architecture
* Rewrite Météo-France as a component
* Update .coveragerc
* Update requirements_all.txt
* remove Weather Card option
* Update conf name
Changing conf name to something more universal for worldwide weather forecast (postal code was only relevent for France)
* Update meteofrance pypi package
* fix line too long
* Update requirements_all.txt
* prevent from calling an API endpoint if not in monitored conditions
* fix stale url and remove blank line
* Insure that all cities are unique
* rename CONF_ATTRIBUTION
* Updating data from component setup
* fix missing extra lines
* Bumped pysmartthings version to 0.6.1
* Added Lock to supported platforms
* Added SmartThings Lock component
* Updated lock to eagerly set state
* Updated requirements_all.txt & requirements_test_all.txt with pysmartthings==0.6.1
* Added SmartThings Lock tests
* Removed inapplicable comment
* Removed unused import (STATE_UNLOCKED)
* Populated device_state_attributes with values provided by SmartThings
* Condensed if_lock assertion function
* Updated gathered attributes
* Fixed typo
* Updated tests to use new setup_platform
* Updated assignment of device state attributes
* Updated tests to utilise the LOCK_DOMAIN constant where suitable
* Fixed false positive for Switch test: (test_unload_config_entry)
* Implemented constant to contain expected SmartThings state for is_locked check
* Improved allocation of State Attributes
* Improved allocation of state attributes
* Fixed lint error (was running lint checks against the wrong file, whoops)
* Added test for unloading lock config
* Use isinstance instead of type()
* Updated device state to explicitly check for is not None instead of a truthy value
* Add Rejseplanen danish public transport sensor component
* Removed commented out code and fixed style errors
* Use rjpl pypi package for API calls.
* Fix platform schema config and code cleanup.
* Use updated rjpl library with specific exceptions
* API error message is now logged, unknown state attributes excluded
* Make monitored_conditions more specific in Ambient PWS
* Revert messing around with storing monitored_conditions elsewhere
* Come on, Aaron
* Fix bug with monitored_conditions in Ambient PWS
* working unique ids for august
* cleanup blank lines
* cleanup blank lines
* cleanup blank lines
* rebase
* get the oneline back in
* blank line stuff
* whitespace cleanup
* Blank Line .
* blank line again
* modbus: support multiple modbus hub
* update data after entities added
* pass hub object to each entity. and save hub to hass.data but not in module level
* add hub_client setup log
* don't update when adding device, because hub_client is not ready right now
* support restore last state
* remove useless func
* compatible with python35
* removed unrelated style changes
* Update flexit for multi-device modbus
* change how hubs are referenced in the configuration
* Also update climate/modbus.py
* Remove unwanted whitescapce
* Defined common constants centrally
* Update DOMAIN in climate and switch components
* Removed unnecessary vol.schema
* Make hub name optional
* Add name property to ModbusHub
* set cover level using emulated_hue
* changed mapping for service turn_on/off for cover.
* removed whitespace for the sake of hound
* using const for domains instead of hardcoded strings.
* change length of lines for the sake of hound
* fixed under-intended line
* changed intent for the sake of hound
* Fixed Thethingsnetwork sensor issue so that it takes the most recent (last) item from the TTN data storage query result instead of the first.
* Update sensor.py
More pythonic way to get the last item of the sensor value list.
* Added support from HmIP-BSL
* Fixed setup of initial on
* Minor changes
Removed Black from Dictionary
added extra case to turn_on
added comments
* moved 3rd party libraries inside methods
* Fixed comment
* Removed code block to keep component behavior consisten to other dimmers
Minimum brightness is 10, otherwise the led is not visible anymore
* moved 3rd party libraries inside methods 2nd
* corrected spelling and variable assignment
* implemented feedback
* removed own state implementation
it is the same as in parent class
* reduced device_state_attributes
brightness is alread in parent class
* On/Off is only determined by brightness now
turn_off sets brightness to 0.
turn_on now uses the previous used color an sets the brightness to 255
* Fixed string sorting of unique_id
* improved usage of base class
* Update code after review by MartinHjelmare
* Fix for the hound
* Fix waze_travel_time component ERROR on startup
Fix the unhandled exception with Waze Travel Time sensor upon startup,
by adding Throttle before update_interval are starting.
* add missing whitespace after ','
* fix line too long (80 > 79 characters)
* lint
* fix interval to use const
* Change to Throttle as a decorator to update
Change to Throttle as a decorator to update instead of self.update = Throttle(interval)(self.update)
remove unnecessary code.
* fix indentations
* Update waze_travel_time.py
* Update waze_travel_time.py
* Update waze_travel_time.py
* Forbid duplicate IDs
* Allow loading persons from storage
* Convert to PersonManager
* Add storage support and WS commands to Person component
* Convert list command to differentiate types
* Allow loading person component without defining persons
* Fix cleanups after update/delete
* Address comments
* Start tracking when HA started
The available state for the August Doorbell is currently set based on the state of the binary ding sensor. This means that if there is no door bell rings in a while on startup the doorbell is shown as Unavailable (#20421) . This ties the availability of the doorbell to the actual online state thats in the device information retrieved from august so that even if there has not been a doorbell ring activity on a while the device shows as online when it is.
* Move more constants to const.py
* Import constants directly from const
* ATTR_ENTITY_ID is not defined in media_player
* MEDIA_PLAYER_PLAY_MEDIA_SCHEMA is still in __init__.py
* Correct imports in tts
* PLATFORM_SCHEMA, SCHEMA is still defined in __init__.py
* Pandora imports several services
* Some additional fixes for move of const in media_player
* Fix hound lengths
* Fix init of TransmissionData
Fix in order to avoid null object on first update of Turtle Mode Switch
* Using async functionality
* Various fix
* HoundBot fix
* Removed some async calls
* Fix compilation Error
* Fix
* PEP fix
* Add better handling of deprecated configs
* Embed the call to has_at_most_one_key in deprecated
* Add tests for checking the deprecated logs
* Add thoroughly documented tests
* Always check has_at_most_one_key
* Fix typing
* Move logging helpers to homea new logging helper
* Lint
* Rename to KeywordMessage instead of BraceMessage
* Remove unneeded KeywordStyleAdapter
* Lint
* Use dict directly rather than dict.keys() when creating set
* Patch the version in unit tests, update logging and use parse_version
* Re-add KeywordStyleAdapter and fix tests
* Lint
* Lint
* KNX: Bumped version to 0.9.4 and added support for tunable white and color temperature for lights.
* Updated to the latest changes
* return None when ct value is unknown
- return None instead of default value when ct is unknown
- remove DEFAULT_COLOR_TEMPERATURE
* use Kelvin as base for relative color temperature
use Kelvin as base for relative color temperature instead of Mireds
* moved fallback value tests for clarity
* Update request from oliverblaha
Co-Authored-By: marvin-w <marvin@fam-wichmann.de>
* Address suggested changes
* Update homeassistant/components/knx/light.py
Co-Authored-By: marvin-w <marvin@fam-wichmann.de>
* Update homeassistant/components/knx/light.py
Co-Authored-By: marvin-w <marvin@fam-wichmann.de>
* Add person component
* Required first name.
* Optional last name and user id.
* Optionally track device trackers. Last device tracker state change will
set state.
* Set device tracker state entity_id as source attribute.
* Set coordinates of device tracker state as state attributes.
* Restore state.
* Parse restored state too
* Clean up
* Add missing property decorator
* Validate source entities as device trackers
* Only use name instead of first and last name
* Add user_id validation
* Add unique_id
* Remove not needed properties
* Uniform docstrings
* Fail component setup if no valid entities
* Add tests
* Add id and use that for unique_id
* Clean up
* added xs1 main component
added implementations for switch, sensor, climate and binary_sensor
* updated code
fixed styling
added comments
removed binary_sensor (wasn't working)
* ran "gen_requirements_all.py" script
* fixed linting issues
* added config options for port and ssl
small fixes
* use already defined config constants instead of defining new ones
* avoid passing in hass to the entity
* use async keyword and proper asyncio calls
limit updates with a global lock to prevent overwhelming the gateway with concurrent requests
change info logger calls to debug
* update dependency
* removed unneeded constant
* fix lint issues
* updated requirements
* removed unused imports
* fixed some flake8 errors
* fixed some flake8 errors
* changed imports to absolute paths
* fixed some lint errors
* fixed some lint errors
* fix update of attached sensor
* reordered imports
added config defaults
check if platform is available
changed docstring
* lint fix
* review fixes
* isort
* import fix
* review fix
* review fix
* review fix
* removed unused imports
* lint fix
* lint fix
* climate fix
exclude sensors that will be used in climate component from default sensor category
* .coveragerc fix
* lint fix
* moved platform to it's own package
* Fix binary sensor in Ambient PWS
* Correctly load entities
* Corrected what on and off means for existing sensor
* Make sure to return a boolean
* Member comments
* Binary sensor doesn't need state property
* Added external auth provider that calls a configurable program
Closes#19975
* Raise proper InvalidAuth exception on OSError during program execution
* Changed name of external auth provider to command_line
* Renamed program config option to command in command_line auth provider
* Made meta variable parsing in command_line auth provider optional
* Added tests for command_line auth provider
* Fixed indentation
* Suppressed wrong pylint warning
* Fixed linting
* Added test for command line auth provider login flow
* Log error when user fails authentication
* Use %r formatter instead of explicit repr()
* Mix all used names of typing module into module namespace
I consider this nasty and bad coding style, but was requested by
@awarecan for consistency with the remaining codebase.
* Small code style change
* Strip usernames with command_line auth provider
* use async_call_later for update
* no need to timeout
* fixes
* move init tasks to hass.loop
* version bump of tellduslive
* fixes for @MartinHjelmare
* fixes task cancel
* don't return from new client
* Allow both VOLUME_STEP and VOLUME_SET
Seems like it should be possible to support both at the same time.
* Update test to allow VOLUME_SET and VOLUME_STEP
* fix state update when no cleaning is yet performed
allow pause vacuum when returning to base
* revert checking of atttribute updates. Will be fixed in upstream lib.
* remove unnecesarry if on pause_commadn
* Fix waze_travel_time component ERROR on startup
Fix the unhandled exception with Waze Travel Time sensor upon startup,
by adding Throttle before update_interval are starting.
* add missing whitespace after ','
* fix line too long (80 > 79 characters)
* lint
* fix interval to use const
* Change to Throttle as a decorator to update
Change to Throttle as a decorator to update instead of self.update = Throttle(interval)(self.update)
remove unnecessary code.
* fix indentations
* Update waze_travel_time.py
* Update waze_travel_time.py
* Update waze_travel_time.py
Flux Led controllers support defining a custom effect. User may define
up to 16 colors, speed of switching between them, and transition type.
Additional changes:
- add support for reporting currently running effect on the controller.
- make effects list sorted, so it's easier to find specific effect in
the list.
* Move group to it's own setup
* Let each component to handle restore of state
* Move constants for climate into const.py
For now import all into __init__.py to keep backword compat
* Move media plyaer constants to const.py file
For now import all constants into __init__.py to keep
backword compatibility
* Move media player to it's own file
* Move climate to it's own file
* Remove ecobee service from common components
BREAKING CHANGE
* Add tests for climate
* Add test for media_player
* Make sure we clone timestamps of state
* Add tests for groups
* Remove old tests for media player, it's handled by other tests
* Add tests for calls to component functions
* Add docstring for climate const
* Add docstring for media_player const
* Explicitly import constants in climate
* Explicitly import constants in media_player
* Add period to climate const
* Add period to media_player const
* Fix some lint errors in climate
* Fix some lint errors in media_player
* Fix lint warnings on climate tests
* Fix lint warnings on group tests
* Fix lint warnings on media_player tests
* Fix lint warnings on state tests
* Adjust indent for state tests
* use async_call_later for update
* no need to timeout
* fixes
* move init tasks to hass.loop
* version bump of tellduslive
* fixes for @MartinHjelmare
* fixes task cancel
* don't return from new client
**Description:**
I modified the file because it should not disable a MTU based on voltage or power. If one has programmed a certain amount of MTUs in his Gateway, they should be all visible and show 0W or 0V.
The problem arises when you have a device that shuts off at night (e.g.: pool pump). It pulls 0W for a while, I don't want my interface to show a big yellow error during that time because the sensor no longer exists. Even the 0V is not a good idea because we can use it to indicate the breaker has tripped.
Hopefully it would be accepted :-)
* Add ffmpeg version
* Add ffmpeg stream content type
* Change ffmpeg camera stream content type
* Change ffmpeg stream content type
* Lint
* Add a none guard
* Fix
* Fix
* Update onvif.py
* Fix version match regrex
* Fix regrex
* Upgrade ha-ffmpeg to 1.11
* Lint
* Get ffmpeg version in ffmpeg component setup
* Add ffmpeg version
* Add ffmpeg stream content type
* Change ffmpeg camera stream content type
* Change ffmpeg stream content type
* Lint
* Add a none guard
* Fix
* Fix
* Update onvif.py
* Fix version match regrex
* Fix regrex
* Upgrade ha-ffmpeg to 1.11
* Lint
* Get ffmpeg version in ffmpeg component setup
* Move sensor.speedtest to the new speedtestdotnet component.
* Split out speedtest.net into a component and sensor platform
* Remove the throttle and add async_track_time_interval
* Add should_poll and cleanup
* Update requirements_all.txt
* Move time interval tracking out of the data class and into the setup method
* Add now=None argument to update
* Change foscam python library to pyfoscam, which is more up to date and has several critical bug fixes.
* Update requirements_all.txt to match.
* Inserting automatically generated requirements.txt
* Revert changes until pyfoscam captures recent bug fixes. The pyfoscam version pulled by pip is currently broken.
* Updated requirements_all.txt based on changing pyfoscam back to libpyfoscam.
* Change foscam python library to pyfoscam, which is more up to date and has several critical bug fixes.
* Update requirements_all.txt to match.
* Inserting automatically generated requirements.txt
* Revert changes until pyfoscam captures recent bug fixes. The pyfoscam version pulled by pip is currently broken.
* Updated requirements_all.txt based on changing pyfoscam back to libpyfoscam.
The 'Loading [wireless] devices from Mikrotik ([ip address])' message
is incredibly spammy at the info log level, such that in the last 24
hours on my installation, that log message has appeared 6732 times,
versus 70 for every other log message. I've moved this message to the
debug log level as I don't believe it adds anything at the info level,
and makes it harder to diagnose other problems.
* start test setup
test cleanup
test deps
update switch test
actually update test deps
cleanup and remove switch from coveragerc
comment
refactor to use fixtures and shared components
lint
* remove availability part that isn't in zha yet
* review comments and cleanup
* review comments
* add switch back unil post reorg merge
* Add SmartThings Light platform and tests
* Cleaned a few awk comments
* Updates per review feedback
* Switched to super
* Changes per review feedback
* Add SmartThings Light platform and tests
* Cleaned a few awk comments
* Updates per review feedback
* Switched to super
* Changes per review feedback
* Split out fastdotcom into a component and a sensor platform
* Update .coveragerc
* Switching to async and using a Throttle
* Add the async_track_time_interval call
* Remove the throttle
* Reorder sensor methods and add should_poll property
* Fix issue #16606
Some projectors do not respond to pjlink requests during a short period after the status changes or when its in standby, resulting in pypjlink2 throwing an error. This fix catches these errors. Furthermore, only the status 'on' and 'warm-up' is interpreted as switched on, because 'cooling' is actually a switched off status.
* Update pjlink.py
Improved error handling
* Update pjlink.py
Improved error handling
* Update pjlink.py
Clean up
* Fix issue #16606
Some projectors do not respond to pjlink requests during a short period after the status changes or when its in standby, resulting in pypjlink2 throwing an error. This fix catches these errors. Furthermore, only the status 'on' and 'warm-up' is interpreted as switched on, because 'cooling' is actually a switched off status.
* Update pjlink.py
Improved error handling
* Update pjlink.py
Improved error handling
* Update pjlink.py
Clean up
When xiaomi_aqara services with one gateway, the default should be set
to the sid of the gateway, not the python object itself, otherwise the
call fails.
* Support for new velux api, added cover.velux
* More steps on new velux covers.
* correct position handling of velux windows
* Following suggestion from hound.
* bumped version
* added cover stop
* bumped version of pyvlx
* Bumped version to 0.2.8
* removed log_frames parameter
* Move mqtt_mock to tests/components/mqtt/conftest.py
* Move mqtt room presence sensor test to tests/components/mqtt
* Revert "Move mqtt room presence sensor test to tests/components/mqtt"
This reverts commit e08bc143
* Decouple mqtt room presence sensor test and mqtt_mock
* Add component for googlehome
* Add missing name in CODEOWNERS
* Linting issues
* googledevices version bump
* Use NAME from component instead of DOMAIN
* Cleaner handling of accepted devices in for loop
* Fixes one linting issue
* Validate device_types
* Fixes one linting issue
* Fixes linting issue
* Revert 0abb642 and import DOMAIN as GOOGLEHOME_DOMAIN
* Return false if discovery_info is None
* Combine if's in for loop
* Use async_load_platfrom
* Fix line length
* Add error message to user
* Shorter log message
* error -> warning, remove period
* Update .coveragerc
* Move to correct place
* Added SmartThings component and switch platform
* Corrected comment typos.
* Embedded switch platform.
* Replaced custom view usage with webhook component.
* Replaced urls with tokens in strings.
* Fixed line length.
* Use generated webhook id instead of static one.
* Reuse core constant instead of defining again.
* Optimizations in anticipation of future platforms.
* Use async_generate_path instead of hard-coded path.
* Fixed line length.
* Updates per review feedback.
* Updates per latest review feedback.
* Use same data schema for configflow, make sensor_id a positive integer.
* Change sensor_id to int and remove duplicate Luftdaten config entries.
This fixes#18838, and also fixes the root cause
of #19981 and #19622.
* Use pure type for boolean.
* Adding sensor for SolarEdge Monitoring API support
* Adding support for Rova garbage calendar
* Added Rova platform to retrieve garbage pickup times
* Update async to new syntax
Added async_update to sensor class
Added Throttle to Rova update function
Minor code style changes
* Small style fixes
* Removed domain
* Update debug to error messages
Change CONF_MONITORED_VARIABLES to CONF_MONITORED_CONDITIONS
Update async update call to normal update
* Update requirements to rova v0.0.2
Add address check to see if ROVA collects in the given area
* Rename entity names to English
Add json_key to Sensor entities
* Add device_class to the RovaSensor
* Fix pylint and flake8 messages
* Add check for None in case collection date is unknown
* Return device class constant
* New Transmission component and interaction
First commit for New Transmission component and interaction
* Fix commit
* Fix commit
* Fix + Switch checkin
Fix according to failed build and request, first checkin for Turtle Mode Switch in Transmission, still have to figure it out why it's not working.
* Bugfixing
* Fix commit
Multiple fix
* Fix
* fix for missing config
* Update on requirements_all.txt
* Fix in requirements_all.txt
* Fix
* Fix for build
* fix
* Fix
* Fix (again)
* Fix
* Fix indentation
* Fix indentation
* Fix Throttle
* Update .coveragerc
* Fix import and coveragerc
* Added Recollect Waste Curbside Collection sensor for tracking next collection date and for which types of waste.
* Added missing schema attributes.
* Adding requirements and coverage entries for Recollect Waste platform.
* Added exception handling, some other fixes and suggestions from code review.
* Fixed reference to incorrect exception type.
* Updated requirements_all.txt with new version of recollect-waste.
* Added true to add_entities. Created constant for default time interval. Used different pylint exclusion comment.
* Using HA's CONF_SCAN_INTERVAL now. Unique_id is now set in @property.
* Changed parameter of timedelta from seconds to days.
* Added test run of recollect client during setup_platform. Using built in SCAN_INTERVAL now.
* Return nothing in setup_platform if there is an exception.
* First draft of area registry
* Refactor based on input
* Add tests for areas
Add tests for updating device
* Updating a device shouldn't require area
* Fix Martins comment
* Require admin
* Save after deleting
* Rename read to list_areas
Fix device entry_dict
Remove area id from device when deleting area
* Fix tests
* Moving existing sensor file
* Initial functionality in place
* Added test for config flow
* Updated coverage and CODEOWNERS
* Linting
* Linting
* Member comments
* Hound
* Moving socket disconnect on HASS stop
* Member comments
* Removed unnecessary dispatcher call
* Config entry fix
* Added support in config flow for good accounts with no devices
* Hound
* Updated comment
* Member comments
* Stale docstrings
* Stale docstring
* Only fetch values of characteristics we are tracking.
* Use callbacks on subclasses to update individual values
* Update alarm_control_panel to use update callbacks
* Update climate to use update callbacks
* Update cover to use update callbacks
* Update light to use update callbacks
* Update lock to use update callbacks
* Update switch to use update callbacks
* Remove compatibility code as all entities migrated
* pylint by name rather than code
* Define the characteristics to poll (or subscribe to) up front
* Configure characteristics immediately instead of during first poll
* Do as much cover configuration upfront as possible
* Remove test workaround as no longer needed
* Remove switch code that is already handled by HomeKitEntity
* Remove lock code already handled by HomeKitEntity
* Remove light code already handled by HomeKitEntity
* Remove alarm code already handled by HomeKitEntity
* Remove climate code already handled by HomeKitEntity
* homekit_controller tests: automatically find entity ids in tests
Some entities use dynamic ids because of the nature of the test fakes it is
hard to predict the name of the entity that will be created. This inspects the
EntityComponent of the domain to find the freshly created entity.
* homekit_controller: Tests can now define their own Service models.
All existing tests use models as defined upstream. But upstream only defines a
few service models. This adds a generic model helper for creating test
service/characteristic models.
* homekit_controller: Add cover tests
* homekit_controller: Add lock tests
* homekit_controller: Add alarm_control_panel tests
* homekit_controller: Update light tests for color_temp.
* Revert "homekit_controller tests: automatically find entity ids in tests"
This reverts commit 506caa4c3e.
* homekit_controller: Mock entity name so entity_id is consistent.
Also remove spurious subclass overrides that are identical to parent class.
* homekit_controler: Make tests less awkward as allowed top level imports
* Reset the incident types count every day
* Remove functionality that was never implemented
We don't need to keep track of previous incidents because it's not used
anywhere.
* Create empty dictionary with a pair of braces: {}
* Change foscam python library to pyfoscam, which is more up to date and has several critical bug fixes.
* Update requirements_all.txt to match.
* Inserting automatically generated requirements.txt
* Embed device_tracker in locative
* Load/unload locative entities correctly between component and platform
* Await the coroutine directly
* Await the correct coroutine
* Add nilu air_pollutants platform
* Code Review - validation, DRYs, rm state override, new attr
- Repeated code moved to own method.
- Removed override of state property.
- New attr for showing nilu pollution recommendations.
- More validation of stations input.
- Minor fixes and typos.
* Removed unused prop
* Check for none result from client before entity add
* Moved platform to air_quality component
* Updated outdated docstrings
* Minor changes
* Add a test for a homekit_controller switch
* Add a test for a homekit_controller lightbulb
* Add a test for homekit_controller thermostat
* Changes from review
* Patch utcnow to known time in HK tests
* Neater fixture use per review
* Split out dovado to a component and sensor platform
* Lint
* Address code review comments (#20339)
* Switch to using a notify platform for dovado SMS (#20339)
* Optimizing imports
* Remove return on `setup_platform`.
* Clean up unneeded constants
* Include exception details in the error log
I see this error quite often in my HA logs and this will be helpful for anyone who is attempting to debug this.
* Minor change
* Remove line break
* fix for smoke detection
* a tilted window is now considered as "open"/on
* changed comparison to enum
* line length
* insert brackets for line length and comparison
* indentation should now be ok for hound
changed api version to 0.10.4
* indentation should now be ok for hound
changed api version to 0.10.4
* updating requirement files
* satisfy lint
* Cleanup if discovered mqtt light can't be added
* No bare except
* Clear ALREADY_DISCOVERED list with helper
* Use constant instead of string literal
for white hue bulbs and bulbs from other brands like Ikea and Innr, this warning will be issued while this is not really a problem.
So just remove the warning.
for white hue bulbs and bulbs from other brands like Ikea and Innr, this warning will be issued while this is not really a problem.
So just remove the warning.
* SongPal: error handling if active_source can't be detected
* sonpal: Add comment to the use of getattr() for property source
* songpal: make comment single-line
Sessions were timing out and requiring a HA restart in order to restore
functionality. Network disconnects are now handled and sessions will be
automatically recovered after they fail.
* Add support for Danfoss Air HRV systems.
* Correct lint errors after initial commit of Danfoss Air HRV support.
* A couple of lint fixes for danfoss_air.
* Refactor to comply with HA standards.
* Style fix.
* Use wildcard for danfoss_air in .coveragerc.
* Remove config example from header documentation.
Correct import name for platforms.
* Add data/data_template/title to alert component
* Fix line length
* Fix tests
* Fix lint
* fix line length
* Fix tests, make title templatable
* Fix test
* Fix test
* Optimize data, make title templated
* Fix line length
* Add title template
* typo
* Fix tests
* Starting work on ecoal boiler controller iface.
* Sending some values/states to controller.
* Basic status parsing, and simple settings.
* Platform configuration.
* Temp sensors seems be working.
* Switch from separate h/m/s to datetime.
* Vocabulary updates.
* secondary_central_heating_pump -> central_heating_pump2
* Pumps as switches.
* Optional enabling pumps via config.
* requests==2.20.1 added to REQUIREMENTS.
* Optional enabling temp sensors from configuration yaml.
* autopep8, black, pylint.
* flake8.
* pydocstyle
* All style checkers again.
* requests==2.20.1 required by homeassistant.components.sensor.ecoal_boiler.
* Verify / set switches in update().
Code cleanup.
* script/lint + travis issues.
* Cleanup, imperative mood.
* pylint, travis.
* Updated .coveragerc.
* Using configuration consts from homeassistant.const
* typo.
* Replace global ECOAL_CONTR with hass.data[DATA_ECOAL_BOILER].
Remove requests from REQUIREMENTS.
* Killed .update()/reread_update() in Entities __init__()s.
Removed debug/comments.
* Removed debug/comments.
* script/lint fixes.
* script/gen_requirements_all.py run.
* Travis fixes.
* Configuration now validated.
* Split controller code to separate package.
* Replace in module docs with link to https://home-assistant.io .
* Correct component module path in .coveragerc.
More vals from const.py.
Use dict[key] for required config keys.
Check if credentials are correct during component setup.
Renamed add_devices to add_entities.
* Sensor/switch depends on ecoal_boiler component.
EcoalSwitch inherits from SwitchDevice.
Killed same as default should_poll().
Remove not neede schedule_update_ha_state() calls from turn_on/off.
* lint fixes.
* Move sensors/switches configuration to component setup.
* Lint fixes.
* Invalidating ecoal iface cache instead of force read in turn_on/off().
* Fail component setup before adding any platform entities.
Kill NOTE.
* Disallow setting entity names from config file, use code defined default names.
* Rework configuration file to use monitored_conditions like in rainmachine component.
* Killed pylint exception.
Log error when connection to controller fails.
* A few fixes.
* Linted.
* Added device tracker support for EE Brightbox 2
* removed timeago dependency
* get scanner checks and improved tests
* fixed lint issues
* removed redundant timeago from test requirements
* fixed variable naming in test
* removed unecessary blank line
* Fix type C02 to CO2 and added VOC to air quality platform
* singularized volatile_organic_compound
* Remove VOC prop
* Update __init__.py
* Update __init__.py
* Added state method to return current operating state to fix#18244 for radiotherm component.
* Changed to set the is_on property when actively heating or cooling.
* EverLights light integration. Supports single color (with color and brightness parameters) or saved pattern (with effect parameter).
* Fix pylint parameter name warning.
* Code review feedback.
* Add tests for the two helper functions of EverLights component.
* Fixes for review feedback.
* Change test style.
* Style fixes for hound.
Handle the case of async_render_with_possible_json_value's value argument
being something other than a string. This can happen, e.g., when using the
SQL sensor to extract a datetime column such as last_changed and also using
its value_template to convert that datetime to another format. This was
causing a TypeError from json.loads, but async_render_with_possible_json_value
was only catching ValueError's.
Handle the case of async_render_with_possible_json_value's value argument
being something other than a string. This can happen, e.g., when using the
SQL sensor to extract a datetime column such as last_changed and also using
its value_template to convert that datetime to another format. This was
causing a TypeError from json.loads, but async_render_with_possible_json_value
was only catching ValueError's.
* Add binary sensor for Lutron RadioRA2 keypad buttons
Allow automations to be triggered from RadioRA2 keypads by exposing
each button as a binary sensor.
* Remove binary sensor component; fire events directly instead.
* Address comments from code review
* Added relay ports to LCN lights platform
* Exchanged validation for ports with uppercase validator. Makes interfacing with pypck enums much more simple.
* Removed supported_features property as it is correctly inherited from parent
* Removed type annotations.
* Added Search Configuration to IMAP Sensor
The IMAP sensor currently only counts unread emails in a folder. By exposing the IMAP search parameter, the sensor can be used to count other results:
- All emails in an inbox
- Emails sent from an address
- Emails matching a subject
- Other advanced searches, especially with vendor-specific extensions. Gmail in particular supports X-GM-RAW, which lets you use any Gmail search directly ("emails with X label older than 14 days with", etc)
For my use case, I just wanted total emails in a folder, to show an "X/Y" counter for total/unread. I started work on a one-off script to throw the data in, but figured I'd try to extend Home Assistant more directly, especially since this IMAP sensor correctly handles servers that push data. This is my first Home Assistant contribution, so apologies in advance if something is out of place! It's a pretty minimal modification.
* Added Server Response Checking
Looks like no library exception is thrown, so check for response text before parsing out results (previous code just counts spaces, so an error actually returns a state value of 4).
* IMAP Warning -> Error, Count Initializes to None
IMAP search response parsing throws an error instead of a warning.
Email count initializes as None instead 0.
Email count is untouched in case of failure to parse response (i.e. if server is temporarily down or throwing errors, or maybe due to user updating their authentication/login/etc).
Fixed line length on error so it fits under 80 characters.
* Fixed Indent on Logger Error
Sorry about the churn! Python is pretty far from my daily-use language. (I did run this one through pep8, at least)
* Use local_ip from config to discover IGD device
In case of multi-homed server UPNP discovery finds IGD device on some "default" interface. WIth this modification discovery will be performed from 'local_ip'.
* Update device.py
* Changed version of async_upnp_client in requirements
* Used aysnc_upnp_client==0.14.0
* Changed requirement to async_upnp_client==0.14.0.dev0
* Changed requirement to async_upnp_client==0.14.0.dev0
* Changed requirement to async_upnp_client==0.14.0.dev0
* Fixed code style
* Fixed code style
* Changed version of async_upnp_client in requerements
* Changed version of async_upnp_client in requirements
* Regenerated requirements (new async_upnp_client)
* Regenerated requirements (new async_upnp_client)
* Changed requirement to async_upnp_client=0.14.1
* Changed requirement to async_upnp_client=0.14.1
* Updated requirements
* Updated requirements.txt
* Corrected requirements
* Corrected import of DeviceState
* Constants changed according new async_upnp_client
* Upgraded for async_upnp_client==0.14.2
Calling clear all is enough to turn off the light. Calling the color
command makes the light no longer function until clear all is called
again. The component calls clear all beforing turning it on which is
why it works through home assistant. However if you try to control the
light via the hyperion app or through kodi after it has been turned off
via home assistant it will not function until you call clear all again.
* Switch locative to use the webhook component
* Lint
* Remove dead test code
* Use voluptuous to validate the webhook schema
* Validate test mode schema as well
* Lint
* Remove allow_extra
* Return web.Response correctly
* #20043: Remove superfluous dict in WEBHOOK_SCHEMA validation
The previous symbol used for degrees was U+00BA, the "Masculine Ordinal Indicator". This patch changes the symbol to U+00B0, "Degree Sign", to match the rest of the Home Assistant system.
* Update requirements
Updated requirements
* Add attributes
Add firmware and config version attributes
* Small bump for aioharmony
Small version bump increase for aioharmony
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Fix for send command with named device
* Update requirements to get reconnect fix
* Set aioharmony version to 0.1.4
Version 0.1.4 has additional small fixes.
* Keep trying to connect on startup
Keep trying to connect to the HUB on startup
* Revert rebase changes
Revert some changes that should have been reverted back as part of rebase.
* PlatformNotReady if unable to connect on startup
Will call PlatformNotReady if unable to connect to Hub on startup
* Increase aioharmony requirement to 0.1.5
Increase aioharmony requirement to 0.1.5
* Register callbacks when entity added to HASS
Register the callbacks only once the entity has been added to HASS instead of during setup of platform.
* Removed debug log in __init__
Removed debug log in __init__
Set color only if light supports color mode.
Set color temp only light supports color temp.
Update entity's brightness only if Zigbee command to set the brightness
was sent successfuly.
* Add notify.html5_dismiss service
* fix test
* add can_dismiss
* fix service data payload
* fix hasattr -> getattr
* fixes
* move dismiss service to html5
* fix services.yaml
* fix line to long
* Add gamut capability to color util
* Include gamut in hue_test
* Improve Philips Hue color conversion
* correct import for new location hue.light
* include file changes between PR's
* update aiohue version
* update aiohue version
* update aiohue version
* fix hue_test
Now Idea why it failed compared to the previous time
* Include gamut in hue_test
* fix hue_test
* Try to test hue gamut conversion
supply a color that is well outside the color gamut of the light, and see if the response is correctly converted to within the reach of the light.
* switch from gamut A to gamut B for the tests.
* remove white space in blanck line
* Fix gamut hue test
* Add Gamut tests for the util.color
* fix hue gamut test
* fix hue gamut test
* Improve Philips Hue color conversion
* fix for #19954, discovered tellsticks shows up to be configured
* fix for #19954, authentication issues
* updated tests
* move I/O to executer thread pool
* Apply suggestions from code review
Co-Authored-By: fredrike <fredrik.e@gmail.com>
* Adjust OpenUV integration for upcoming API limit changes
* Added fix for "Invalid API Key"
* Bugfix
* Add initial nighttime check
* Move from polling to a service-based model
* Fixed test
* Removed unnecessary scan interval
* Fixed test
* Moving test imports
* Member comments
* Hound
* Removed unused import
* Change return text code for alarmdotcom
* Change return text code for ialarm
* Change return text code for IFTTT
* Change return text code for manual alarm panel
* Change return text code for manual MQTT alarm
* Change return text code for MQTT
* Change return text code for Simplisafe
* Added support for HomeKit Controller covers
* removed copied code
* more linting fixes
* added device type to service info
* added checks for value in characteristics
* added state stopped parsing
* removed logger
* removed unused args
* fixed inits
* removed unused imports
* fixed lint issues
* fixed lint issues
* remove state_unknown
* remove validation of kwargs in homekit controller covers
* guarantee tilt position is not none before setting
The battery level sensor is broken because the logic for determining
if the battery is charged accessed the wrong variable. This one
character fix makes it work again.
* Update requirements
Updated requirements
* Add attributes
Add firmware and config version attributes
* Small bump for aioharmony
Small version bump increase for aioharmony
* Order ATTR constants
* Add the service
Add service change_channel
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Updates based on review
* Upgrade greeneye_monitor to 1.0
This is a breaking change; it causes the `serial_number` field in
configuration to be treated as the full 8-digit serial number rather
than the last 5 digits as was previously done, which results in the unique
identifiers for the sensors being different. (Fixing them up in
`config/.storage/core.entity_registry` before rebooting into the updated
version seems to prevent any weirdness.)
The last-5-digits behavior was a result of me misunderstanding the packet
format docs and not realizing that the true serial number was split across
two fields. In addition to being confusing (see
https://community.home-assistant.io/t/brultech-greeneye-issues/86852), it
was technically incorrect. The `greeneye_monitor` platform was just introduced
in 0.82, so it seems like the kind of thing that's best to fix now while
adoption is relatively low rather than later when somebody runs into it
as more than just a point of confusion.
* Switch to 8-character string
* Coerce to int
* Remove now-unnecessary cast
* Update doorbird events to include URLs on event_data as shown in documentation.
(cherry picked from commit 2405bc96fe)
* Format timestamp
* Update timestamp
* Lint
* catch TypeError's in addition to ValueError's in response from unifi access point
sometimes unifi's access point returns incomplete json which results in a TypeError because ssid_table is None
* fix syntax error
* Preparing for transition to config flow
Added multiple gateway support
Reworked parameter flow to platforms to enable multiple controllers
Breaking change to config, now a list of gateways is expected instead of a single config
* Updated coveragerc
Added new location of fibaro component
* Fixes based on code review and extended logging
Addressed issues raised by code review
Added extended debug logging to get better reports from users if the device type mapping is not perfect
* Changhes based on code review
Changes to how configuration is read and schemas
Fix to device type mapping logic
* simplified reading config
* oops
oops
* grr
grr
* change based on code review
* changes based on code review
changes based on code review
This lane ended up calling vars(transport) on an asyncio Transport
object. In a standard setup, that's a python object provided by syncio,
and it works. Home Assistant injects uvloop into asyncio, which makes this
a Python C object, and those don't support vars().
* Add mysensors state update delay
* Schedule state update after delay to avoid updating state multiple
times during the same short timespan.
* Code review
* reconfigure zha device service
add log line to reconfigure service for consistency
* add entity functions to support new services
* added new services and web socket api and split them into their own module
* support manufacturer code
logging to debug
get safe value for manufacturer
* update services.yaml
* add comma back
* update coveragerc
* remove blank line
* fix type
* api cleanup - review comments
* move static method to helpers - review comment
* convert reconfigure service to websocket command - review comment
* change path
* fix attribute
* Change state() to try/except to catch KeyError
When Tautulli is up but Plex is down, the API doesn't return a 'stream_count' key. This causes calls to state() to raise KeyError exceptions. The new code includes a try/except to catch the KeyError and return -1 signifying that the Tautulli API cannot talk to Plex
* Update tautulli.py
If a network_key is not configuired, the following error is logged:
TypeError: expected bytes, NoneType found
Exception ignored in: 'libopenzwave.str_to_cppstr'
TypeError: expected bytes, NoneType found
We don't need to set the key if it's None, let's skip in that case.
* fix cla-bot
* fix bug introduced after linter complaint
* merge two components into one
support telnet port configuration
* remove obsolete nadtcp component. nad component must be used instead.
* back to correct nad_receiver version
* Initial pass of cleanup for shabbat_times
* Switch to async defs
* First pass of unit tests + fixture data
* Completion of first round of unit tests, 100% passing
* Unit tests for state restoring
* Style fixes
* More style fixes
* Lint fix
* Add upcoming candelighting and havdalah sensors
* Add unit tests, remove havdalah offset
* More unit tests + small bugfix for weekly_portion
* Add issur melacha sensor
* Remove old shabbat_times work-in-progress files
* Bump required version of hdate
* Add havdalah offset config parameter
* Bump hdate version required
* Pin hdate requirement
* Lint fixes
* Changes based on review + API changes for hdate 0.8.7
* Add three-day holiday unit tests
* Remove debugging line
* Add missing docstring
* Fix doc lint comment
* Update googlehome.py
Added name from bluetooth device to attributes
* Update homeassistant/components/device_tracker/googlehome.py
Check if key exists before assigning name
Co-Authored-By: cliffordwhansen <clifford@nighthawk.co.za>
* Dont load if not in config
* Adding config options for sensors
* Fixed mistake with iterating over wrong things
* lint
* lint
* Setting None state
* Using .get when fetching optional config
The mychevy service is notoriously unreliable, often only having 50% uptime.
Previously a persistent notification was emitted when the platform errored out.
Users have found that is happening too often, so instead log an error when
this happens instead.
The accent must be removed (Léa -> Lea) just like the other voices (eg. Celine, Peneloppe) to match with Amazon voices ID.
Fun fact: there is no alternative name for "Léa" on Amazon Polly documentation: https://docs.aws.amazon.com/en_us/polly/latest/dg/voicelist.html, probably just omitted.
Mitigation: alternative voices (with and without accents) can be put into `SUPPORTED_VOICES`, both `voice.get('Id')` and `voice.get('Name')` must be then checked for a match.
This fixes#19802.
Thank you 👍
* added zwave lock state from alarm type workaround
* fixed test indents
* more linting fixes
* one more linting fix
* simplified logic
* fixed lint new lines
* fixed merge conflict issue
* fixed definition of _alarm_type_workaround in zwave lock
* added support for homekit security systems
* fixed linting issues
* fixed indentation issues
* simplifired logic on homekit_controller alarm controller panel
* cleaned up battery level const on homekit controller alarm control panel
* Add optional country parameter
mychevy 1.2.0 provides the ability to work in canada as well as the us
(there are different service urls for each region). This creates a new
config option to enable it.
* Update mychevy.py
* Moved component to a package and added a services.yaml file.
* Fixing coverage issue and grammar issue on the services.yaml file.
* Fixed typo in the services.yaml file.
* Alexa: implement auth and proactive ChangeReport messages
* refactor after rebase from dev to use the new AlexaDirective and Response classes
* move to aiohttp; cleanup
* better function name
* move endpoint to config
* allow passing token function
* remove uneeded state get
* use iterable directly
Co-Authored-By: abmantis <abmantis@users.noreply.github.com>
* missing delete from previous commit
* checks for when user has no auth config
* update cloud component
* PR suggestions
* string lint
* Revert "string lint"
This reverts commit a05a1f134c9ebc7a6e67c093009744f142256365.
* linters are now happier
* more happy linters
* use internal date parser; improve json response handling
* remove unused import
* use await instead of async_add_job
* protect access token update method
* add test_report_state
* line too long
* add docstring
* Update test_smart_home.py
* test accept grant api
* init prefs if None
* add tests for auth and token requests
* replace global with hass.data
* doc lint
* awair: do not choke on no data
The awair API returns an empty response for various air data queries
when a device is offline. The underlying library (python_awair) does
not directly inform us that a device is offline, since we really can
only infer it from an empty response - there is no online/offline
indicator in the graphql API.
So - we should just ensure that we do not attempt to update device state
from an empty response. This ensures that the platform does not crash
when starting up with offline devices, and also ensures that the
platform is marked unavailable once devices go offline.
* Fix typo
Further proof that coding after 10pm is rolling the dice.
* Added a new service for calling custom PGM functions.
* Fixed lint issues
* Fixed lint issues reported by travis-CI
* Fixed style issue.
* Complete rename of attribute.
* Add ness alarm control panel using nessclient
* indenting
* .
* Remove availability functionality, will improve and add back in another PR
* Use call_count
* lint
* lint
* Review changes
* Lint
* Bump nessclient to 0.9.8
* Bump nessclient to 0.9.9
* Remove from .coveragerc
* some minor tests refactor
* async/await refactor
* toggle have not brightness
* test for race condition in unknown device
* test for 'no_command' and 'not_connected'
* test for race condition in unknown device
* sensor events are handled in sensor devices, RflinkDevice handle
command events
* test race conditions & bogus entity remove
* two more tests
* Test race condition for unknown components
* Test cleanup for `commands events` and `sensor events`
* ADS light breaks if optional parameter adsvar_brightness is not set
Just a small change to prevent exception if optional parameter adsvar_brightness is not set
* corrected blank lines
* Use aioharmony for async
Use aioharmony to interact with Harmony hub. Due to this following improvements:
-) Setting of available state for entity
-) Automatic config update if configuration changes (including updating file containing config)
-) Allow using of device name instead of number
-) When sending command with repeat, nothing else will be able to put a IR command in between
* Requirements updated
* Version update for fix
* Mainly cleanup
* Update requirements
Updated requirements
* Fixed lint issue
* Small bump for aioharmony
Small version bump increase for aioharmony
* Updated based on review
* added components and requirement
* change config to allow the definition of multiple switches without redefining the gateway
* dont assume false state
fix default value
* added exclude to coveragerc
* sorted imports
* review fixes
* review fixes
* bugfix
review fixes
* review fix
* Updated version to 0.9.3
Adjusted climate component due to changes in the underlying library.
* Climate.KNX: fix updating view when operation mode is changed due to refactoring
* Addressed review comments
* Added validation for config.
Rewrote the tests a bit
the 'wait for the timer to finish' part of the test is now it's own test.
The rest is a sequence of fire/assert. Which i rewrote to a loop to
reduce the amount of duplicate code
* Initial commit of LCN component and light platform
* Corrected pre-review comments
* Fixed dimming behaviour in combination with transitions for lcn lights
* Removed unused logger
* Combined __init__.py and core.py into lcn.py component. Bumped to pypck==0.5.6
* Fixed .coveragerc
* Bumped to pypck==0.5.7
* Bump to pypck==0.5.8
* Fixed requirements_all.txt
* Moved unique generation of connection names to config schema's validator
* Minor changes due to review comments.
Bump to pypck==0.5.9.
* Address_connection is passed into LcnDevice
* Set should_poll property on LcnDevice to return False
* Moved platform config validation to component. Load platform using discovery helper
* Furtehr changes due to the review
* Light configuration is set required as there are no other platforms up to now
* Fix shuffle/random status
MPD always shows true for shuffle. For some reason casting the 0 or 1 as a boolean does not work. Now returns 'true' or 'false' based on the value of 'random'.
* Update homeassistant/components/media_player/mpd.py
Change to correct way of returning shuffle boolean. 'random' needs to be cast as an integer before being cast as a boolean.
Co-Authored-By: apetrycki <34962392+apetrycki@users.noreply.github.com>
* Remove incorrect string code
Original fix method returns a string instead of a boolean. Removed in favor of MartinHjelmare's method.
* Update pylaunches dependency to 0.2.0
Update launch library to use pylaunches 0.2.0 as a dependency. launch_time sensor attribute will now be passed in ISO format, allowing for templating/easier automating with this attribute.
* Update pylaunches to 0.2.0
* Bluetooth tracker: add device_id configuration option
Makes the device id that bluetooth tracker is using configurable instead
of using the first available device.
* Remove unncessary default in config.get
It is already handled in the configuration validation.
* Improve Lutron RadioRA2 support, adding switch and scene support.
- Update the version of pylutron to 0.2 which has various bug fixes.
- Switch to pylutron's per-device subscribe
- Add switch support, and configure any non-dimmable output as a switch.
- Add scene support, using any configured keypad button with a corresponding LED as a scene.
* Fixes for comments in pull request home-assistant/home-assistant#18330
* More fixes for comments in pull request #18330
* Remove unused imports
* Cleanup in docstrings for Lutron scene support.
* add hub- and device-info
* attempt to make I/O outside event loop
* add_executer_job
* coroutines
* async_get_hubs
Co-Authored-By: fredrike <fredrik.e@gmail.com>
* asyncio fixes
* do device_info IO when device is discovered
* it's called async_add_executor_job
* nicer unique_id
* add comment
* it's called `async_add_executor_job`
* hub always contains 'name'
* await each new device
* add comment to why gather is bad
The subnode id for the motion enable node of Insteon 2844-222 motion sensor II on the ISY is 'D'. The binary_sensory/isy994.py assumed this value will be an integer rather than hex and fails. Changing line 55 to subnode_id = int(node.nid[-1], 16) fixes the issue.
* Remove timer logic from sensor class
Proposed fix for issue #10500
* Updating the tests to remove timer logic
* Removing unecessary dependancy
* Fixing requested changes
* Commit to try to fix the CLA ?
* Added Lutron Homeworks components.
* Made all requested changes other than config.
* Removed commented out code.
* Removed binary_sensor.
Implemented new signal/events for button presses.
Cleaned up some data passing.
* Fixed minor formatting.
* Got rid of unused config stuff.
Reordered imports.
* Missed removing vol, and forgot an extra line.
* More requested changes
Removed HomeworksController, it wasn't needed.
* Removed stale code.
* Imperative doc change.
* Disable creating port mappings from UI, add discovery from component
* Remove unused constant
* Upgrade to async_upnp_client==0.13.6 and use manufacturer from device
* Upgrade to async_upnp_client==0.13.7
In HomeAssistant 0.84.3, the range filter would not work due to the unexpected precision filter parameter.
The default range scheme has been edited to remove the unexpected precision parameter.
Verified and tested.
* added new sensor platform to expose Islamic prayer times
* added new sensor platform to expose Islamic prayer times
* updated tests according to feedback
* make prayer_times_info a public attribute
* remove stale comments
* * Rename ocr.png to ssocr-(entity_name).png to allow multiple seven_segments instances to run without overwrting each other's data.
* Update seven_segments.py
* Update seven_segments.py
* Use string formatting
* Add Mythic Beasts DNSAPI Component
* Added timeout, and tests for exceptions while updating
* Move API to external module
* Move mbddns import into function
* Updated tests to mock out mbddns library
* Implement async_configure() method for ZHA entities.
Allow attribute reporting configuration to be stored as dict of zha
entity.
* Update ZHA platform to use new attribute reporting configuration.
* Use const declaration instead of magic numbers.
* Add support for manufacturer_id in ZCL attribute reporting configuration.
* Refactor async_configure() method.
Rename attribute reporting dict to zcl_reporting_config.
* Updates to Harmony for web sockets
Updates to harmony to use web sockets with async
* Lint
* Small fixes
* Fix send_command
Continued improvements:
-) Fixed send_command
-) Get HUB configuration during update in case it was not retrieved earlier (i.e. HUB unavailable)
* Further improvements
Completely removed dependency on __main__ for pyharmony, instead everything is now done from the HarmonyClient class.
Writing out Harmony configuration file as a JSON file.
Using same functionality to determine if activity provided is an ID or name for device, allowing send_command to receive a device ID or device name.
* Point requirements to updated pyharmony repo
Updated REQUIREMENTS to point to repository containing the updates for pyharmony.
* lint
lint
* Small fix for device and activity ID
Small fix in checking if provided device or activity ID is valid.
* Pin package version
* No I/O in event loop
* Point at HA fork with correct version bump
* Fix req
* Updates to Harmony for web sockets
Updates to harmony to use web sockets with async
* Lint
* Small fixes
* Fix send_command
Continued improvements:
-) Fixed send_command
-) Get HUB configuration during update in case it was not retrieved earlier (i.e. HUB unavailable)
* Further improvements
Completely removed dependency on __main__ for pyharmony, instead everything is now done from the HarmonyClient class.
Writing out Harmony configuration file as a JSON file.
Using same functionality to determine if activity provided is an ID or name for device, allowing send_command to receive a device ID or device name.
* Point requirements to updated pyharmony repo
Updated REQUIREMENTS to point to repository containing the updates for pyharmony.
* lint
lint
* Small fix for device and activity ID
Small fix in checking if provided device or activity ID is valid.
* Pin package version
* No I/O in event loop
* Point at HA fork with correct version bump
* Fix req
* Adding sensor for SolarEdge Monitoring API support
* Adding support for Rova garbage calendar
* Update solaredge to pass lint and flake8
* Added solaredge.py to .coveragerc
* Added extend for Voluptuous schema
* Fixed styling issues
* Removed rova.py for later feature
* Replaced API requests with python pip package
* Fixed styling issues
* Updated to new async syntax
Added async_update to sensor class
Added Throttle to SolarEdge data update
Added CONF_NAME to platform settings
Added credentials check for api
Minor code style changes
* Remove unnecessary debug logging
* Updated dict keys
* Added SCAN_INTERVAL
Updated platform setup
* Remove DOMAIN variable
Correct import for PLATFORM_SCHEMA
* Change some debug to error messages
Correct return statements
Remove initial update call
* Fix pylint and flake8 errors
* WeMo - Various fixes and improvements
Various fixes & improvements to the WeMo components, including:
-- Fixes to rediscovery
-- New reset filter service for the WeMo Humidifier
-- Switched the remainder of the WeMo components to async IO
-- Removed any remaining IO in entity properties and moved them to the polling/subscription update process
* WeMo - Fix pywemo version and remove test code from WeMo fan component
* WeMo Humidifier - Add services.yaml entry for reset filter life service
* WeMo - Update binary_sensor component to use asyncio
* WeMo - Add available property to binary_sensor component
* WeMo - Fixed line length issue
* WeMo - Fix issue with discovering the same device multiple times
* WeMo - Fix for the fix for discovering devices multiple times
* WeMo - Fix long lines
* WeMo - Fixes from code review
* WeMo - Breaking Change - entity_ids is now required on wemo_set_humidity
* WeMo - Code review fixes
* WeMo - Code review fixes
* WeMo - Code review fixes
* complete(?)
* fixed linting
* update requirements
* added to coveragerc
* fixed linting
* added ability to set custom name
* fixed linting
* added filter
* spacing
* Added list of possible fuels
* Minor updates
In HomeAssistant 0.84.3, the range filter would not work due to the unexpected precision filter parameter.
The default range scheme has been edited to remove the unexpected precision parameter.
Verified and tested.
* Adjusted api for new library version.
* Added support for output monitoring. Added initial status check for the alarm.
* Added default values to the configuration as per review notes.
* added gtt sensor
* removed trailing space
* updated requirements_all
* fixed two errors in the code style
* fixed imperative in docstring
* disabled pylint false positive
* fixed description on top of the file
* added files to .coveragerc
* fixes
* linting
* fixed linting 👍
* left a trailing space, now it's gone.
* fix
* Provide charging indicator for mychevy
This expands the mychevy sensor for the battery level to also know if
the system is currently charging to get the correct icon.
* address review feedback
When editing an entity in the frontend dialog, pressing save causes a "save failed: Entity is already registered" error. This is because the frontend always sets `name` and `new_entity_id` in the websocket command even if they haven't been changed. This adds a check that the `new_entity_id` is actually different from `entity_id` before erroring that the `new_entity_id` is already registered.
* Fixed manual alarm control panel restore state
* Revert "Fixed manual alarm control panel restore state"
This reverts commit 61c9faf434.
* Fixed manual alarm control panel's state restore
* Set lock status correctly for Schlage BE469 Z-Wave locks
PR #17386 attempted to improve the state of z-wave lock tracking for
some problematic models. However, it operated under a flawed
assumptions. Namely, that we can always trust `self.values` to have
fresh data, and that the Schlage BE469 sends alarm reports after every
lock event. We can't trust `self.values`, and the Schlage is very
broken. :)
When we receive a notification from the driver about a state change,
we call `update_properties` - but we can (and do!) have _stale_
properties left over from previous updates. #17386 really works best
if you start from a clean slate each time. However, `update_properties`
is called on every value update, and we don't get a reason why.
Moreover, values that weren't just refreshed are not removed. So blindly
looking at something like `self.values.access_control` when deciding to
apply a workaround is not going to always be correct - it may or may not
be, depending on what happened in the past.
For the sad case of the BE469, here are the Z-Wave events that happen
under various circumstances:
RF Lock / Unlock:
- Send: door lock command set
- Receive: door lock report
- Send: door lock command get
- Receive: door lock report
Manual lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Keypad lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Thus, this PR introduces yet another work around - we track the current
and last z-wave command that the driver saw, and make assumptions based
on the sequence of events. This seems to be the most reliable way to go
- simply asking the driver to refresh various states doesn't clear out
alarms the way you would expect; this model doesn't support the access
control logging commands; and trying to manually clear out alarm state
when calling RF lock/unlock was tricky.
The lock state, when the z-wave network restarts, may look out of sync
for a few minutes. However, after the full network restart is complete,
everything looks good in my testing.
* Fix linter
* Added motion, speed and battery attributes.
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
When editing an entity in the frontend dialog, pressing save causes a "save failed: Entity is already registered" error. This is because the frontend always sets `name` and `new_entity_id` in the websocket command even if they haven't been changed. This adds a check that the `new_entity_id` is actually different from `entity_id` before erroring that the `new_entity_id` is already registered.
* Added brottsplatskartan sensor
* Update brottsplatskartan sensor
* Remove redundant configuration checks.
* Set attributes during initialization.
* Setup brottsplatskartan module in setup_platform().
* Just do a simple return, no need for returning false.
* Remove file that was used during testing
* Better variable name and remove excessive newline.
* More updates to brottsplatskartan
* Import uuid at the top of the module.
* Use sensor as domain.
* Don't fire custom events.
* Remove period from logging message.
* Adding validation for area parameter
* Validate empty area configuration
* Fixing indentation.
* Fixing the config schema
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Adding ambient_station.py sensor and updating requirements file
* Cleaning up code and fixing flake8 warnings
* Fixing flake8 and pylint warnings
* Fixing bug, things are working well now
* removing nosetests file
* Adding changes as requested in pull request #18551
* Updating with more change requests from PR code review
* Removing SCAN_INTERVAL from PLATFORM_SCHEMA
* Removing unused import
* Adding platform schema validation for monitored_conditions and conf_units
* Updating link to documentation in doc-string. File already named in doc repo
* Only setup platform if component can successfully communicate with API
* Inverting check for platform setup success
* Adding basic Plum Lightpad support - https://plumlife.com/
* Used Const values
is_on is a bool
* Added LightpadPowerMeter Sensor to the plum_lightpad platform
* Moved to async setup, Introduced a PlumManager, events, subscription, Light and Power meter working
* Added PlumMotionSensor
* Added Glow Ring support
* Updated plum library and re-normalized
* set the glow-ring's icon
* Naming the glow ring
* Formatting and linting
* Cleaned up a number of linting issues. Left a number of documentation warnings
* setup_platform migrated to async_setup_platform Plum discovery run as a job
* bumped plumlightpad version
* On shutdown disconnect the telnet session from each plum lightpad
* Cleanup & formatting. Worked on parallell cloud update
* Moved setup from async to non-async
* Utilize async_call_later from the helpers
* Cleanedup and linted, down to documentation & one #TODO
* Remove commented out debug lines
* Fixed Linting issues
* Remove TODO
* Updated comments & fixed Linting issues
* Added plumlightpad to requirements_all.txt
* Fixing imports with isort
* Added components to .coveragerc
* Added PLUM_DATA constant for accessing hass.data[PLUM_DATA]
* used dictionary syntax vs get(...) for config
* Linting needed an additonal line
* Fully async_setup now. removed @callback utilize bus events for detecting new devices found.
* Upgraded to plumlightpad 0.0.10
* Removed extra unused PLATFORM_SCHEMA declarations
* Moved listener attachment to `async_added_to_hass` and removed unused properties & device_state_attributes
* Utilized Discovery when devices were located
* Linting and cleanup
* used `hass.async_create_task` instead of `hass.async_add_job` per Martin
* Removed redundant criteria in if block
* Without discovery info, there is no need to setup
* Better state management and async on/off for Glow Ring
* renamed async_set_config back to set_config, fixed cleanup callback and Plum Initialization
* Fixed flake8 linting issues
* plumlightpad package update
* Add 'motion' device_class to Motion Sensor
* Fixed last known Linting issue
* let homeassistant handle setting the brightness state
* String formatting vs concatenation
* use shared aiohttp session from homeassistant
* Updating to use new formatting style
* looks like @cleanup isn't neccesary
* ditch the serial awaits
* Ensure async_add_entities is only called once per async_setup_platform
* Creating tasks to wait for vs coroutines
* Remove unused white component in the GlowRing
* Used local variables for GlowRing colors & added a setter for the hs_color property to keep the values in sync
* Linted and added docstring
* Update the documentation path to point to the component page
* Removed the extra sensor and binary_sensor platforms as requested. (To be added in later PRs)
* Update plum_lightpad.py
* Update plum_lightpad.py
* Fixed manual alarm control panel restore state
* Revert "Fixed manual alarm control panel restore state"
This reverts commit 61c9faf434.
* Fixed manual alarm control panel's state restore
* Set InsteonEntity name to be combo of description and address.
ie "LampLinc Dimmer 26453a" or "Keypad Dimmer 291abb_2"
Using a centralized network name
* Updated the name to have a more contextual references for device
functions then just the group id.
* Cleanup for hound
* Removed the _generate_network_address function. Not used anymore
* Cleanup for lint
* clean for hound
* Moved descriptor mapper to be a class variable of the InsteonEntity in order to fix lib loading issue for lint
* Well, moved DescriptorMapper instance to a function variable now...
* fix hound
* Lint Cleanup
* Clean up docstrings
* Simplify Label lookup based on state name
* Add custom component to core
* Add pyrail to reqs
* Format & lint
* Sort nmbs.py into place on coveragerc
* Only set up station live if provided
* Only set up sensor if config is provided
* Fix line too long linting error
* PR Remarks
* Add docstrings
* Fix hound line to long error
* Fix quotes
* Rebase coveragerc
* PR Review
* Init empty attrs
* Dont include delay if there is none
* PR review
* Safer check
* Rebase reqs
* Generate req
* Update homeassistant/components/sensor/nmbs.py
Co-Authored-By: thibmaek <thibault.maekelbergh@iCloud.com>
* PR remarks
* Update synology_chat.py
* Added verify_ssl option to notify.synology_chat
Python requests will verify ssl by default, this configuration options allows the user to specify if they want to verify ssl or not. Non breaking change, default is True - do verify ssl.
* Feature: support for the HK AVR
* Remove testcode
* Feature: support for the HK AVR
* Remove testcode
* Added checklist
* Review fixes whitespaces
* Lint fixes
* Review fixes, add current source
* Remove unused imports
* Review fixes; State constants, dict[key]
* More review fixes, Unknown state and Sources
* Review fix; rename devices to entities
* Add websocket-based non-polling variant for songpal
* linting fixes
* changes based on Martin's feedback
* Fix linting
* add backoff timer for reconnects, fix variable naming (I thought that this wouldn't matter for internals..)
* Remove poll configuration variable
* bump the version just to be sure, the previous release lacked a version file (required for setup.py)
* event foundation
* implement quirks
* lock zha-quirks version
* allow quirks handling to be toggled on and off
* revert event commit
* disable warning
* update requirements_all
* Remove fix in favor of #19141#19141 should be what ultimately corrects this issue.
* review comment
* Enable alarmdecoder to see open/close state of bypassed zones when armed
The alarmdecoder component already reported RF state bits as attributes. If the user knows which loop is set up for the zone in the alarm panel, they can use that information to tell whether the zone is open or closed even when the system is armed by monitoring the appropriate attribute. That’s awkward, so this commit enables the user to simply configure which loop is used and the component will update the state itself.
* Simplify, also it's more correct to treat it as a state change rather than a
permanent state, since it's possible the decoder might miss some events.
* Remove relative import
* Add MVP
* Remove unused code
* Fix
* Add force back
* Fix tests
* Storage keyed
* Error out when storage doesnt find config
* Use old load_yaml
* Set config for panel correct
* Use instance cache var
* Make config option
* Add MVP
* Remove unused code
* Fix
* Add force back
* Fix tests
* Storage keyed
* Error out when storage doesnt find config
* Use old load_yaml
* Set config for panel correct
* Use instance cache var
* Make config option
This works by adding `?check_same_thread=False` to the sqlite
connection string, as suggested by robbiet480@.
It upgrades pygtfs from homeassitant's forked 0.1.3 version to 0.1.5.
Fixes#15725
* radiotherm: bump version to 2.0.0
* radiotherm: change handling of transient errors from tstat
Radiotherm 2.0.0 now throws an exception when a transient error is
detected, instead of returning -1 for the field where the error was
detected. This change supports handling the exception.
* Fix google assistant request sync service call
* More descriptive services.yaml
* Update services.yaml
* Update __init__.py
* Update request sync service call timeout
Change from 5s to 15s to allow Google to respond. 5s was too short. The service would sync but the service call would time out and throw the error.
* Add Philips Moonlight Bedside Lamp support
* Update comment
* Make hound happy
* Wrap the call that could raise the exception only
* Remote blank line
* Use updated python-miio API
* Set lock status correctly for Schlage BE469 Z-Wave locks
PR #17386 attempted to improve the state of z-wave lock tracking for
some problematic models. However, it operated under a flawed
assumptions. Namely, that we can always trust `self.values` to have
fresh data, and that the Schlage BE469 sends alarm reports after every
lock event. We can't trust `self.values`, and the Schlage is very
broken. :)
When we receive a notification from the driver about a state change,
we call `update_properties` - but we can (and do!) have _stale_
properties left over from previous updates. #17386 really works best
if you start from a clean slate each time. However, `update_properties`
is called on every value update, and we don't get a reason why.
Moreover, values that weren't just refreshed are not removed. So blindly
looking at something like `self.values.access_control` when deciding to
apply a workaround is not going to always be correct - it may or may not
be, depending on what happened in the past.
For the sad case of the BE469, here are the Z-Wave events that happen
under various circumstances:
RF Lock / Unlock:
- Send: door lock command set
- Receive: door lock report
- Send: door lock command get
- Receive: door lock report
Manual lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Keypad lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Thus, this PR introduces yet another work around - we track the current
and last z-wave command that the driver saw, and make assumptions based
on the sequence of events. This seems to be the most reliable way to go
- simply asking the driver to refresh various states doesn't clear out
alarms the way you would expect; this model doesn't support the access
control logging commands; and trying to manually clear out alarm state
when calling RF lock/unlock was tricky.
The lock state, when the z-wave network restarts, may look out of sync
for a few minutes. However, after the full network restart is complete,
everything looks good in my testing.
* Fix linter
* Automatically detect if ipv4/ipv6 is used for cert_expiry
Fixes#18818
Python sockets use ipv4 per default. If the domain which should be checked
only has an ipv6 record, socket creation errors out with
`[Errno -2] Name or service not known`
This fix tries to guess the protocol family and creates the socket
with the correct family type
* Fix line length violation
* Fix unavailable
Change setting to unavailable when getting request exceptions only after 1 minute has past since 1st occurrence.
* Put common code in _check_state_available
Put common code to determine if available should be set to False in method _check_state_available
* Unique ID support
New unique ID support, based on hub's serial number and device's permanent ID
* Fixes, showing attributes
Minor fixes
Showing room, hub, fibaro_id for easier mapping and finding of devices
* Update fibaro.py
* Add support for multiple RainMachine controllers
* Member comments
* Member comments
* Member comments
* Cleanup
* More config flow cleanup
* Member comments
This bumps to the new version of the waterfurnace API. In the new
version the unit id is no longer manually set by the user, instead it
is retrieved from the service after login. This is less error prone as
it turns out discovering the correct unit id is hard from an end user
perspective.
Breaking change on the config, as the unit parameter is removed from
config. However I believe the number of users is very low (possibly
only 2), so adaptation should be easy.
This bumps to the new version of the waterfurnace API. In the new
version the unit id is no longer manually set by the user, instead it
is retrieved from the service after login. This is less error prone as
it turns out discovering the correct unit id is hard from an end user
perspective.
Breaking change on the config, as the unit parameter is removed from
config. However I believe the number of users is very low (possibly
only 2), so adaptation should be easy.
After six months the chevy website finally has been reimplemented to
something that seems to work and is stable. The backend library has
been updated thanks to upstream help, and now is working again.
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* remove the need to have query feature support
Some InfluxDB servers don't have /query support feature but are still valid servers for storing data.
Usually those servers are proxies to others timeseries databases.
The change proposes to still validate the configuration but with less requirements on the server side.
* `.query` call is replaced by `.write_points`
* no more query call in the influxdb component. remove test
* reset mock after the setup and before the test
* remove unused import
* reset mock stats after component setup
* Updated Yale Smart Alarm platform to use Yale's new API which replaces the deprecated version. Bumped yalesmartalarmclient to v0.1.5.
* Update requirements
* Add new events for automation trigger and script run, fix context for image processing, add tests to ensure same context
* remove custom logbook entry for automation and add new automation event to logbook
* code review updates
* Initial scene support
Added initial support for fibaro scenes
* removed comments
* cleanup based on code review
* Removed unused functions
* grrr, my mistake.
My local pylint and flake8 are playing tricks with me
* Update homeassistant/components/scene/fibaro.py
* fixes based on code review
ABC ordered the list of platforms
changed setup platform to async
removed overloaded name property as the FibaroDevice parent class already provides this
Changed to new style string formatting
* Update homeassistant/components/scene/fibaro.py
Co-Authored-By: pbalogh77 <peter.balogh2@gmail.com>
The `Config` object specific to the `google_assistant` component
had a default value for `allow_unlock`. We were not overriding this
default when constructing the Config object during `google_assistant`
component setup, whereas we do when setting up the `cloud` component.
To fix, we thread the `allow_unlock` parameter down through http setup,
and ensure that it's set correctly. Moreover, we also change the
ordering of the `Config` parameters, and remove the default. Future
refactoring should not miss it, as it is now a required parameter.
* Initial hlk-sw16 relay switch support
* remove entity_id and validate relay id's
* Bump hlk-sw16 library version and cleanup component
* refactor hlk-sw16 switch platform loading
* Use voluptuous to coerce relay id to string
* remove force_update for SW16Switch
* Move to callback based hlk-sw16 relay state changes
* fix hlk-sw16 default port and cleanup some unused variables
* Refactor to allow registration of multiple HLK-SW16 device
* Store protocol in instance variable instead of class variable
* remove is_connected
* flake8 style fix
* Move reconnect logic into HLK-SW16 client library
* Cleanup and improve logging
* Load hlk-sw16 platform entities at same time per device
* scope SIGNAL_AVAILABILITY to device_id
* Fixes for connection resume
* move device_client out of switches loop
* Add timeout for commands and keep alive
* remove unused variables
* Allow verisure locks to be configured with a default code
* linting fix
* PR feedback
* PR feedback - try harder to prevent future typos
A python mock is a magical thing, and will respond to basicaly
any method you call on it. It's somewhat better to assert against
an explicit variable named 'mock', rather than to assert on the
method name you wanted to mock... could prevent a typo from messing up
tests.
* PR feedback: convert tests to integration-style tests
Set up a fake verisure hub, stub out a _lot_ of calls, then test
after platform discovery and service calls.
It should be noted that we're overriding the `update()` calls in
these tests. This was done to prevent even further mocking of
the verisure hub's responses.
Hopefully, this'll be a foundation for people to write more tests.
* more pr feedback
* Added lightwave components for switches and lights.
* Address warnings raised by Hound
* Correcting lint messages and major typo. This time tested before commit.
* Trying to fix author
* Minor lint changes
* Attempt to correct other lint error.
* Another lint attempt.
* More lint issues.
* Last two lint errors! Hurrah.
* Changes after review from fabaff.
* Moved device dependent code to PyPi.
* Replaced DEPENDENCIES with REQUIREMENTS
* Updated following code review from Martin Hjelmare.
* Added lightwave to requirements_all.txt
* Omit lightwave from tests.
* Updated requirements_all.txt
* Refactored how lightwave lights and switches load.
* Removed imports that were no longer required.
* Add guard for no discovery_info.
* Make it a guard clause and save indentation. Rename LRFxxx to LWRFxxx.
* Sorted imports to match style guidelines.
* Correct return value.
* Update requirements_all.txt
* Catch case where we have no lights or switches configured.
* Improve configuration validation.
The `Config` object specific to the `google_assistant` component
had a default value for `allow_unlock`. We were not overriding this
default when constructing the Config object during `google_assistant`
component setup, whereas we do when setting up the `cloud` component.
To fix, we thread the `allow_unlock` parameter down through http setup,
and ensure that it's set correctly. Moreover, we also change the
ordering of the `Config` parameters, and remove the default. Future
refactoring should not miss it, as it is now a required parameter.
* Fibaro HC connection, initial commit
Very first steps working, connects, fetches devices, represents sensors, binary_sensors and lights towards HA.
* Cover, switch, bugfixes
Initial support for covers
Initial support for switches
Bugfixes
* Some cleanup and improved lights
pylint based cleanup
light switches handled properly
light features reported correctly
* Added status updates and actions
Lights, Blinds, Switches are mostly working now
* Code cleanup, fiblary3 req
Fiblary3 is now in pypi, set it as req
Cleanup based on pylint
* Included in .coveragerc and added how to use guide
Included the fibaro component in coveragerc
Added usage instructions to file header
* PyLint inspired fixes
Fixed pylint warnings
* PyLint inspired fixes
PyLint inspired fixes
* updated to fiblary3 0.1.5
* Minor fixes to finally pass pull req
Fixed fiblary3 to work with python 3.5
Updated fiblary3 to 0.1.6
(added energy and batteryLevel dummies)
* module import and flake8 fixes
Finally (hopefully) figured out what lint is complaining about
* Fixed color support for lights, simplified callback
Fixed color support for lights
Simplified callback for updates
Uses updated fiblary3 for color light handling
* Lean and mean refactor
While waiting for a brave reviewer, I've been making the code smaller and easier to understand.
* Minor fixes to please HoundCI
* Removed unused component
Scenes are not implemented yet
* Nicer comments.
* DEVICE_CLASS, ignore plugins, improved mapping
Added support for device class and icons in sensors and binary_sensors
Improved mapping of sensors and added heuristic matching
Added support for hidden devices
Fixed conversion to float in sensors
* Fixed dimming
Fibaro apparently does not need, nor like the extra turnOn commands for dimmers
* flake8
* Cleanup, Light fixes, switch power
Cleanup of the component to separate init from connect, handle connection error better
Improved light handling, especially for RGBW strips and working around Fibaro quirks
Added energy and power reporting to switches
* Missing comment added
Missing comment added to please flake8
* Removed everything but bin.sensors
Stripdown, hoping for a review
* better aligned comments
OMG
* Fixes based on code review
Fixes based on code review
* Implemented stopping
Implemented stopping of StateHandler thread
Cleanup for clarity
* Minor fix
Removed unnecessary list copying
* Nicer wording on shutdown
* Minor changes based on code review
* minor fixes based on code review
* removed extra line break
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improved support for Fibaro UBS
Improved support for Fibaro Universal Binary Sensor, when configured to flood sensor or motion sensor.
* netatmo: make module type identification more consistent
For the interpretation of voltage values the different types of netatmo
modules need to be distinguished. This is currently done by selecting
the second character of the modules '_id'. The _id-field actually
contains a mac address. This is an undocumented way of identifying the
module_type.
The netatmo API also delivers a field called 'type' which provides a
more consistent way to differentiate the fields. This commit introduces
a differentiation which uses this provided type. This should improve
readability.
Also the field module_id is renamed to module_type which should better
resemble what it actually represents.
* netatmo: reintroduce unique_id using actual module mac address
Each netatmo module features a unique MAC-Address. The base station uses
an actual assigned MAC Address it also uses on the Wifi it connects to.
All other modules have unique MAC Addresses which are only assigned and
used by Netatmo on the internal Wireless-Network. All theses Addresses
are exposed via the API. So we could use the combination
MAC-Address-Sensor_type as unique_id.
In a previous commit this had already been tried but there was a
misunderstanding in what the 'module_id' represented. It was actually
only a module_type representation so it clashed when two modules of the
same type where used.
* Netatmo: fixed line length
* added additional filters
Added base64_encode, base64_decode and ordinal filters.
* added test cases
added test cases for base64_encode, base64_decode and ordinal filters.
* forgot to add filters :)
* Create test for platform
Created test for platform.
Added media_stop to common.py test
* Multiple improvements
Fixed lint issue in common.py
Fixed lint issues in test_directv.py
Improved patching import using modile_patcher.start() and stop()
Added asserts for service calls.
* Updates based on Martin's review
Updates based on Martin's review.
* Updated test based on PR#18474
Updated test to use service play_media instead of select_source based on change from PR18474
* Lint issues
Lint issues
* Further updates based on feedback
Updates based on feedback provided.
* Using async_load_platform for discovery test
Using async_load_platform for discovery tests.
Added asserts to ensure entities are created with correct names.
* Used HASS event_loop to setup component
Use HASS event_loop to setup the component async.
* Updated to use state machine for # entities
Updated to use state machine to count # entities instead of entities.
* Use hass.loop instead of getting current loop
Small update to use hass.loop instead, thanks Martin!
* Forgot to remove asyncio
Removed asyncio import.
* Added fixtures
Added fixtures.
* Remove not needed updates and assertions
* Return mocked dtv instance from side_effect
* Fix return correct fixture instance
* Clean up assertions
* Fix remaining patches
* Mock time when setting up component in fixture
* Patch time correctly
* Attribute _last_update should return utcnow
* Added Entur departure information sensor.
* Fixed houndci-bot comments.
* Removed tailing whitespace.
* Fixed some comments from tox lint.
* Improved docstring, i think.
* Fix for C1801
* Unit test for entur platform setup
* Rewritten entur component to have pypi dependecy.
* Propper client id for api usage.
* Minor cleanup of usage of constants.
* Made location output configurable.
* Cleaned up usage of constants.
* Moved logic to be contained within setup or update methods.
* Moved icon consts to root in module.
* Using config directly in test
* Minor changes
* Store state last seen time separately
This ensures that infrequently updated entities aren't accidentally
dropped from the restore states store
* Fix mock restore cache
* Quickfix for crash with virtual devices
Added try/except to critical loops of processing
Reinforced read_devices, map_device_to_type and update processing
* oops
* Quickfix for crash with virtual devices
Added try/except to critical loops of processing
Reinforced read_devices, map_device_to_type and update processing
* oops
* BUGFIX: add support for extra fan speeds.
* Drop extra fan speeds.
Remove catch all, drop missing fan speeds.
* fix self.speed_synonyms call. Remove un-needed keys() call
* BUGFIX: add support for extra fan speeds.
* Drop extra fan speeds.
Remove catch all, drop missing fan speeds.
* fix self.speed_synonyms call. Remove un-needed keys() call
* Add support for Mode trait in Google Assistant.
* Simplify supported logic.
* Fix SUPPORTED_MODE_SETTINGS to correct rip failures.
* more stray commas
* update tests.
Add the following sensors that provide interesting data when using a variable speed geothermal system:
* Compressor Power
* Fan Power
* Aux Power
* Loop Pump Power
* Compressor Speed
* Fan Speed
* Fix statistics for binary sensor
-) Binary sensors have 'on' and 'off' for state resulting in issue as numbers were expected. Fixed so that it works with non-numeric states as well.
-) Added check to skip unknown states.
-) Updates test so that binary sensor test will use non-numeric values for states.
* Using guard clause and changed debug to error
Changed to use a guard clause for state unknown.
Writing error on value error instead of debug.
* Add docstring
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Moved stop method and registering outside of init
Moved the cleanup to a seperate method and perform registering for the event in setup.
* Removed use of global variable
Removed use of global variable.
* Removed API_SESSIONS
Removed unused declaration API_SESSIONS.
* Add permission checks to Rest API
* Clean up unnecessary method
* Remove all the tuple stuff from entity check
* Simplify perms
* Correct param name for owner permission
* Hass.io make/update user to be admin
* Types
* Enable Google Assistant OnOffTrait for climate devices that support them
This commit enables the OnOffTrait for climate devices that have the SUPPORT_ON_OFF feature. I have tested this locally with a Sensibo device which supports ON_OFF and a nest device that does not.
* Update trait.py
* Add tests for onoff_climate
* Add OnOff trait to climate.heatpump
* Add on status to heatpump in google_assistant tests
* code cleanup to make use of new externalised feed manager
* fixed lint
* revert change, keep asynctest
* using asynctest
* changed unit test from mocking to inspecting dispatcher signals
* code clean-up
* Added Zones, and removed available() logic
flesh out Zones
tidy up init
some more tidying up
Nearly there - full functionality
passed txo - ready to send PR
Ready to PR, except to remove logging
Add Zones and associated functionality to evohome component
Add Zones to evohome (some more tidying up)
Add Zones to evohome (Nearly there - full functionality)
Add Zones to evohome (passed tox)
Add Zones to evohome (except to remove logging)
Add Zones and associated functionality to evohome component
Revert _LOGGER.warn to .debug, as it should be
Cleanup stupid REBASE
* removed a duplicate/unwanted code block
* tidy up comment
* use async_added_to_hass instead of bus.listen
* Pass evo_data instead of hass when instntiating
* switch to async version of setup_platform/add_entities
* Remove workaround for bug in client library
- using github version for now, as awaiting new PyPi package
* Avoid invalid-name lint - use 'zone_idx' instead of 'z'
* Fix line too long error
* remove commented-out line of code
* fix a logic error, improve REDACTION of potentially-sensitive infomation
* restore use of EVENT_HOMEASSISTANT_START to improve HA startup time
* added a docstring to _flatten_json
* Switch instantiation from component to platform
* Use v0.2.8 of client api (resolves logging bug)
* import rather than duplicate, and de-lint
* We use evohomeclient v0.2.8 now
* remove all the api logging
* Changed scan_interal to Throttle
* added a configurable scan_interval
* small code tidy-up, removed sub-function
* tidy up update() code
* minimize use of self.hass.data[]
* remove lint
* remove unwanted logging
* remove debug code
* correct a small coding error
* small tidyup of code
* remove flatten_json
* add @callback to _first_update()
* switch back to load_platform
* adhere to standards fro logging
* use new format string formatting
* minor change to comments
* convert scan_interval to timedelta from int
* restore rounding up of scan_interval
* code tidy up
* sync when in sync context
* fix typo
* remove raises not needed
* tidy up typos, etc.
* remove invalid-name lint
* tidy up exception handling
* de-lint/pretty-fy
* move 'status' to a JSON node, so theirs room for 'config', 'schedule' in the future
* Use asyncio Lock for fibaro light
* line length and empty line at end
* async turn_off
Turned the turn_off into async as well
* bless you, blank lines...
My local flake8 lies to me. Not cool.
* Add cloud webhook support
* Simplify payload
* Add cloud http api tests
* Fix tests
* Lint
* Handle cloud webhooks
* Fix things
* Fix name
* Rename it to cloudhook
* Final rename
* Final final rename?
* Fix docstring
* More tests
* Lint
* Add types
* Fix things
* Use asyncio Lock for fibaro light
* line length and empty line at end
* async turn_off
Turned the turn_off into async as well
* bless you, blank lines...
My local flake8 lies to me. Not cool.
* Add permission checks to Rest API
* Clean up unnecessary method
* Remove all the tuple stuff from entity check
* Simplify perms
* Correct param name for owner permission
* Hass.io make/update user to be admin
* Types
* Fix false log message on CAPsMAN only devices
False debug log message appeared on CAPsMAN only devices without physichal wireless interfaces. This fix eliminates them.
* Fixed indentation to pass flake8 test
* Awair Sensor Platform
This commit adds a sensor platform for Awair devices, by accessing
their beta API. Awair heavily rate-limits this API, so we throttle
updates based on the number of devices found. We also allow for the
user to bypass API device listing entirely, because the device list
endpoint is limited to only 6 calls per day. A crashing or restarting
server would quickly hit that limit.
This sensor platform uses the python_awair library (also written
as part of this PR), which is available for async usage.
* Disable pylint warning for broad try/catch
It's true that this is generally not a great idea, but we really don't
want to crash here. If we can't set up the platform, logging it and
continuing is the right answer.
* Add space to satisfy the linter
* Awair platform PR feedback
- Bump python_awair to 0.0.2, which has support for more granular exceptions
- Ensure we have python_awair available in test
- Raise PlatformNotReady if we can't set up Awair
- Make the 'Awair score' its own sensor, rather than exposing it other ways
- Set the platform up as polling, and set a sensible default
- Pass in throttling parameters to the underlying data class, rather
than use hacky global variable access to dynamically set the interval
- Switch to dict access for required variables
- Use pytest coroutines, set up components via async_setup_component,
and test/modify/assert in generally better ways
- Commit test data as fixtures
* Awair PR feedback, volume 2
- Don't force updates in test, instead modify time itself and let
homeassistant update things "normally".
- Remove unneeded polling attribute
- Rename timestamp attribute to 'last_api_update', to better reflect
that it is the timestamp of the last time the Awair API servers
received data from this device.
- Use that attribute to flag the component as unavailable when data
is stale. My own Awair device periodically goes offline and it really
hardly indicates that at all.
- Dynamically set fixture timestamps to the test run utcnow() value,
so that we don't have to worry about ancient timestamps in tests
blowing up down the line.
- Don't assert on entities directly, for the most part. Find desired
attributes in ... the attributes dict.
* Patch an instance of utcnow I overlooked
* Switch to using a context manager for timestream modification
Honestly, it's just a lot easier to keep track of patches. Moreover,
the ones I seem to have missed are now caught, and tests seem to
consistently pass.
Also, switch test_throttle_async_update to manipulating time more
explicitly.
* Missing blank line, thank you hound
* Fix pydocstyle error
I very much need to set up a script to do this quickly w/o tox, because
running flake8 is not enough!
* PR feedback
* PR feedback
Remove the return value from setup_platform
Convert LutronLight.__init__ to use super() when referencing the parent class.
Change device_state_attributes() to use lowercase snakecase (Rename 'Lutron Integration ID' to 'lutron_integration_id')
* Added support for cropping pictures in proxy camera
This includes extending the configuration to introduce a mode
(either 'resize', default, or 'crop') and further coordinates
for the crop operation.
* Also fixed async job type, following code review
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improvements based on code review
Improvements based on code review
* Fixes based on code review
Fixes based on code review
* Changes to light behavior based on code review
Changes to light behavior based on code review
* Internal changes
Changed how brightness is represented internally.
It should have no impact on functionality.
* Use service play_media instead of select_source
Use service play_media instead of select_source to change the channel as play_media is the right service for that.
* Log error on invalid media type
Log an error instead of raising a NotImplementedError if an invalid media type is provided.
* Changed so that success is not in else statement
Updated so that if media_type is channel that it is not in the else of an if.
* Update directv.py
Removed SELECT_SOURCE as supported feature.
* Rebased
Re-based with dev
* Add websocket calls to shopping-list
Plan to deprecate API calls once shopping-list panel is removed from UI and replaced fully by Lovelace card
* Address ci-bot issues
* Fix violations
* Address travis complaints
* Address review comments
* Update test_shopping_list.py
* Update mikrotik.py
* Update mikrotik.py
* Added basic api_ssl support
Added preliminary support to use api_ssl instead of api. It don't check the validity of the certificate need it.
At Home Assistant side add ssl = true to your sensor configuration, and don't forget to change the port too (to 8729 by default):
device_tracker:
- platform: mikrotik
host: 192.168.88.1
port: 8729
ssl: true
username: homeassistant
password: TopSecret
At MikroTik side you have to add or generate a certificate, and configure api_ssl to use it. Here is an example:
/certificate add common-name="Self signed demo certificate for API" days-valid=3650 name="Self signed demo certificate for API" key-usage=digital-signature,key-encipherment,tls-server,key-cert-sign,crl-sign
/certificate sign "Self signed demo certificate for API"
/ip service set api-ssl certificate="Self signed demo certificate for API"
/ip service enable api-ssl
/ip service disable api
/user group add name=homeassistant policy=read,api,!local,!telnet,!ssh,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!sensitive,!romon,!dude,!tikapp
/user add group=homeassistant name=homeassistant
/user set password="TopSecret" homeassistant
* Fixed import missind ssl lib
* SSL support code cleanup, use ssl-api port by default if ssl enabled
* Restored accidentalli deleted method parameter
* Fixed Python 3.5.3 compilation errors
Fixed Python 3.5.3 compilation errors reported by Travis CI
* Removed duplicated MTK_DEFAULT_API_PORT
* Recreate component if discovery info is changed
* Update component instead of remove+add
* Set name and unique_id in __init__
* Update unit test
* Cleanup
* More cleanup
* Refactor according to review comments
* Change discovery_hash
* Review comments, add tests
* Fix handling of value_template
Dark Sky Sensor didn't expose conditions for day 0 (today forecast) that
had the same name as current conditions. With this change all conditions
form day 0 (today) forecast are exposed the same way as conditions for
the rest of the days (1..7): as `dark_sky_<condition>_<day>`. As a
consequence, conditions for day 0 that were already exposed now have
`_0` suffix. This actually improves the code by removing most of
special handling, based on condition name.
To get day 0 conditions the user now has to add `- 0` to `forecast`
configuration parameter.
Conditions, for which suffix `_0` appeared: `precip_accumulation`,
`temperature_high`, `temperature_low`, `apparent_temperature_high`,
`apparent_temperature_low`, `precip_intensity_max`, `moon_phase`.
This is a breaking change!
Closes#18205
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Added available property
Added available property
* Disable feature TURN_ON and TURN_OFF for DVR clients
Disable the feature turn_on and turn_off for DVR clients.
* self._is_client and raise NotImplementedError
Updated setting self._is_client
Raise NotImplementedError if turn_on or turn_off is called for clients.
* Log delay and wait_template steps in scripts
Help improve script debugging by logging delay and wait_template steps in scripts.
* Update tests
* Fix lint issue
This avoids a race between multiple concurrent calls to
entity_platform.async_add_entities() which may cause
entities to be created with non-unique entity_id
* Enable native support + ADB authentication for Fire TV
* Remove unnecessary underscore assignments
* Bump firetv to 1.0.5.3
* Change requirements to 'firetv>=1.0.6'
* Change requirement from 'firetv>=1.0.6' to 'firetv==1.0.6'
* Address pylint errors
* Ran 'python script/gen_requirements_all.py'
* Address some minor reviewer comments
* Run 'python script/gen_requirements_all.py'
* Just use the 'requirements_all.txt' and 'requirements_test_all.txt' from the 'dev' branch...
* Edit the 'requirements_all.txt' file manually
* Pass flake8 tests
* Pass pylint tests, add extended description for 'select_source'
* More precise exception catching
* More Pythonic returns
* Import exceptions inside '__init__'
* Remove 'time.sleep' command
* Sort the imports
* Use 'config[key]' instead of 'config.get(key)'
* Remove accessing of hidden attributes; bump firetv version to 1.0.7
* Bump firetv to 1.0.7 in 'requirements_all.txt'
* Don't access 'self.firetv._adb', use 'self.available' instead
* Remove '_host' and '_adbkey' attributes
* Create the 'FireTV' object in 'setup_platform' and check the connection before instantiating the entity
* Fixed config validation for 'adbkey'
* add_devices -> add_entities
* Remove 'pylint: disable=no-name-in-module'
* Don't assume the device is available after attempting to connect
* Update the state after reconnecting
* Modifications to 'adb_decorator'
* Modifications to 'setup_platform'
* Don't update the state if the ADB reconnect attempt was unsuccessful
* 'return None' -> 'return'
* Use 'threading.Lock()' instead of a boolean for 'adb_lock'
* Use a non-blocking 'threading.Lock'
Show excited, happy, neutral, sad, dead emoticon, or biohazard icon,
based on air pollution level.
Also, fix a small typo and change air quality index icon to
`mdi:chart-line`. Seems a bit more logical.
* Remove notify schema from hangouts platform
* Notify platforms shouldn't overwrite the notify component service
schema. That has no effect.
* Fix hangouts service data key value
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
* Fibaro HC connection, initial commit
Very first steps working, connects, fetches devices, represents sensors, binary_sensors and lights towards HA.
* Cover, switch, bugfixes
Initial support for covers
Initial support for switches
Bugfixes
* Some cleanup and improved lights
pylint based cleanup
light switches handled properly
light features reported correctly
* Added status updates and actions
Lights, Blinds, Switches are mostly working now
* Code cleanup, fiblary3 req
Fiblary3 is now in pypi, set it as req
Cleanup based on pylint
* Included in .coveragerc and added how to use guide
Included the fibaro component in coveragerc
Added usage instructions to file header
* PyLint inspired fixes
Fixed pylint warnings
* PyLint inspired fixes
PyLint inspired fixes
* updated to fiblary3 0.1.5
* Minor fixes to finally pass pull req
Fixed fiblary3 to work with python 3.5
Updated fiblary3 to 0.1.6
(added energy and batteryLevel dummies)
* module import and flake8 fixes
Finally (hopefully) figured out what lint is complaining about
* Fixed color support for lights, simplified callback
Fixed color support for lights
Simplified callback for updates
Uses updated fiblary3 for color light handling
* Lean and mean refactor
While waiting for a brave reviewer, I've been making the code smaller and easier to understand.
* Minor fixes to please HoundCI
* Removed unused component
Scenes are not implemented yet
* Nicer comments.
* DEVICE_CLASS, ignore plugins, improved mapping
Added support for device class and icons in sensors and binary_sensors
Improved mapping of sensors and added heuristic matching
Added support for hidden devices
Fixed conversion to float in sensors
* Fixed dimming
Fibaro apparently does not need, nor like the extra turnOn commands for dimmers
* flake8
* Cleanup, Light fixes, switch power
Cleanup of the component to separate init from connect, handle connection error better
Improved light handling, especially for RGBW strips and working around Fibaro quirks
Added energy and power reporting to switches
* Missing comment added
Missing comment added to please flake8
* Removed everything but bin.sensors
Stripdown, hoping for a review
* better aligned comments
OMG
* Fixes based on code review
Fixes based on code review
* Implemented stopping
Implemented stopping of StateHandler thread
Cleanup for clarity
* Minor fix
Removed unnecessary list copying
* Nicer wording on shutdown
* Minor changes based on code review
* minor fixes based on code review
* removed extra line break
* Update query to include maxAge
Updated the query from recorded to include MaxAge if set; reducing the amount of records retrieved that would otherwise be purged anyway for the sensor.
* Initialization upon HASS start
Register the state listener and read previous information from recorder once HASS is started.
* Updated test_statistics.py for HASS start
Updated test_statistics.py to start HASS and wait it is completed before running test.
* Added newline in docstring
Added newline in docstring.
* Added start of HASS to test_initialize_from_database_with_maxage
Added start of HASS to new test test_initialize_from_database_with_maxage.
* Updates based on review
Following updates based on review:
-) Removed self._hass and passing hass
-) Changed async_add_job to async_create_task
-) For state update, calling async_schedule_update_ha_state
Only add sensor entities for accounts with the specified currencies.
This is a none breaking change.
If it's not specified then all account wallets will be loaded.
* Fix and improvment of Swiss Hydrological Data component
* changed component to get data from a REST API rather than from crawling the website
* fixed several issues and lint errors
* Fix and improvment of Swiss Hydrological Data component
* Minor changes
- Simplify the sensor configuration (expose value as attributes rather than sensor)
- Make the setup fail if station is not available
- Add unique ID
- Prepare for config flow
* Remove notify schema from hangouts platform
* Notify platforms shouldn't overwrite the notify component service
schema. That has no effect.
* Fix hangouts service data key value
* Update query to include maxAge
Updated the query from recorded to include MaxAge if set; reducing the amount of records retrieved that would otherwise be purged anyway for the sensor.
* Added newline in docstring
Added newline in docstring.
* Add test + small fix
Added test to ensure query works correctly
Query should be greater then or equal instead of greater then. Fixed.
* Fixed lint issue
Fixed lint issue.
* Add srp_energy
* Update message on TypeError. Add check for None state.
* Add check for none in history
* Add srpenergy to Test requirements.
* Add srpenergy to requirments.
* Change = to ==.
* Change import for srpenergy
* Fix Flak8 errors
* Add srp to gen requirements script
* Change config name.
* Add daily usage test
* Add test for daily usage.
* Fix Flake8 message.
* Remove blank after docstring.
* Add srpenergy to coverage
* Bump requires version to srpenergy
* Fix type in coverage. Import from Sensor. Use dict.
* Update to 1.0.5. Check credentials on setup. Standalone test.
* Fix formating.
* Remove period. Rename _ variables.
* Fix rebase merge
* Add rebase requirement
* Improve Mock Patching.
* Initial commit of w800rf32 component and binary_sensor.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Initial commit of w800rf32 switch platform.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Remove unused code.
* Additions for w800rf32 component and platform code
* Fix w800rf32 minor lint issues and make sure gen_requirements.py correctlly adds w800rf32
* Added dispatch_connect/send and refactor somewhat
* Fix missed indentation lint
* Removed shared entity dict and use async_dispatch code
* Fix long line not caught by lint
* One more line too long, missed it
* Remove unused code and changes for async
* Remove @callback that shouldn't be there.
* Remove switch platform, can't have read only switch.
* Remove unused CONF_DEBUG
* Remove used vars and make CONF_DEVICES required
* Move CONF_OFF_DELAY to platform, only used there
* Add new launch sensor to keep track of space launches.
* Added attribution to Launch Library.
* Adds data class and throtle, reuse aiohttp session.
* Add one extra blank line before the new class..
* Change throttle to simpler SCAN_INTERVAL.
* Remove the usage of the LaunchData class.
* Bump pylaunches, remove . from log, fix line breaker for agency_country_code, remove CONF_ from ATTRIBUTION.
This is easier to handle than raising an exception: a circular
dependency causes multiple error entries in the log, which is what we
want.
This is harder to achieve with an exception. Since there is only one
user of this code, I choose to fix the documentation -- instead of
adding a lot of mostly-useless exception handling.
Closes: #13147
* Add read only and admin policies
* Migrate to 2 system groups
* Add system groups
* Add system groups admin & read only
* Dont' mutate parameters
* Fix types
* Adds upload and download sensors for asuswrt and makes it a component.
* Rebase
* removes warnings
* Fixing review issues
* More robust connection phase
* Generate dependencies
* Not needed try catch
* Rename sensors
* Revorked tests so they can be turned on again
* Using component setup
* Test through correct setup
* Forgot we dont need to worry about older py
In 0.7.x the API to HDate was cleaned up so as to move logic from homeassistant to
the HDate external library.
This commit removes all the superfluous code, updates the required tests and changes the
requirement from version 0.6.5 to 0.7.5
* Validate value against valid list
* Show correct name
Constants in alphabetical order.
Added default name when not showing the local/current version.
* Add icon
Icon was already defined but not set
* Unnecessary "elif" after "return" (no-else-return)
* Adds support for Lupusec alarm control panel
* fixed various mostly cosmetic issues
* fixed generic type of binary sensors
* fixed some formatting; removed scan interval completely -> defaults now to 2 secs
* removed unused data caches; added check if binary sensor class exists
* cosmetics
* generic type fix
* small fix
* small fixes
* guard clause added
* small fixes
* Split out geofency with a component and platform
* Make geofency component/device_tracker more async
* Move geofency tests to new package
* Remove coroutine in geofency callback
* Lint
* Fix coroutine in geofency callback
* Fix incorrect patch
* Add Norwegian Public Transportation sensor (Ruter).
* Corrected typo.
* change stopid to stop_id, actually use attributes, changed logging, corrected link, removed unused variable.
* Change to RuterSensor for the class, and move logic to me more readable.
* Use correct sensor class.
* Add return if blank list, remove else
Along with hopefully helping resolve these actual problems, a nudge for people to look at their own code might help catch other quick fixes before anyone else has to review a PR.
* Add attributes of ARP table
This adds the device attributes available in the ARP table and a few more. Implementation is inspired by the nmap scanner.
* lint spaces
* Added eco mode option to Ziggo Mediabox XL
* Changed eco_mode_on to eco_mode
* Removed eco_mode option, the player is unavailable when offline
* Timeout on connection, on/off states are handled via update
* Improved state detection and added available property
* Melissa attributes
* overide device_state_attributes rather than state_attributes
* Selected attributes
* Adding current humidity rather than a state_attribute
* Add support for Google Home device tracking.
* Use dict[key] for options.
* Delete googlehome.py.save
* Change stylling of name, and attr mac_address to btle_mac_address, removed unesssesarry attributes copying.
* Add additional property to HomeKitSwitch to show whether the Homekit outlet is in use or not
* Fix issues from review - Remove unused property, simplify and rename the device_state_attributes method
* Add keepalive support
- adds keepalive support
- adds debug messages
- corrects CONF_PHONEBOOK and CONF_PREFIXES constants
* Add keepalive config constant
* Fix default value
* More visual indentation
* move to platform
* Move to platform
* Make keepalive default and remove option
* Forgot a few lines
* Add workaround to use notification state for zwave lock state
There are several zwave lock models out there which do not seem to
update the lock state on non-rf events (see #11934#14632#14534 for
examples) including kwikset smartkey zwave plus locks (which I own).
In these cases it seems that the notifications for non-rf events the
access_control value is updated but not the primary value for the
lock state, which is what is used to set the is_locked property. To
properly have the lock state accurate for all types of notifications
on these models we need to use the access_control field. This commit
adds a workaround for the 4 models reported to exhibit this behavior
so that home-assistant will reliably set the lock state for all
device notifications.
* Add YRD220 as per adrum to workaround list
* Inline constants
* Add support for locks in google assistant component
This is supported by the smarthome API, but there is no documentation
for it. This work is based on an article I found with screenshots of
documentation that was erroneously uploaded:
https://www.androidpolice.com/2018/01/17/google-assistant-home-can-now-natively-control-smart-locks-august-vivint-first-supported/
Google Assistant now supports unlocking certain locks - Nest and August
come to mind - via this API, and this commit allows Home Assistant to
do so as well.
Notably, I've added a config option `allow_unlock` that controls
whether we actually honor requests to unlock a lock via the google
assistant. It defaults to false.
Additionally, we add the functionNotSupported error, which makes a
little more sense when we're unable to execute the desired state
transition.
https://developers.google.com/actions/reference/smarthome/errors-exceptions#exception_list
* Fix linter warnings
* Ensure that certain groups are never exposed to cloud entities
For example, the group.all_locks entity - we should probably never
expose this to third party cloud integrations. It's risky.
This is not configurable, but can be extended by adding to the
cloud.const.NEVER_EXPOSED_ENTITIES array.
It's implemented in a modestly hacky fashion, because we determine
whether or not a entity should be excluded/included in several ways.
Notably, we define this array in the top level const.py, to avoid
circular import problems between the cloud/alexa components.
* Add config flow step for manual input
Remove support for loading discovery config from json file
* Small cleanup
Fix all translations to step user instead of step init
* Revert to using step_init
* Small cleanup
Add test_gateway that was forgotten in a previous PR
* Fix hound comment
* Fix empty pydocstring
Added debug log information for when records are purged and added entity_id to existing debug information to identify the entity the debug information is for.
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Fix issue in checking if DTV device is already configured
If a DTV device was configured before, then discovery would add this device again seperately if the name specified in the configuration is different from the name on the DTV.
This issue is fixed now. Part of the fix also ensure to allow multiple "primary" devices on the network to be discovered.
Further also added debug logging to the setup_platform.
* Further improvements
Some additional improvements related to handling the DATA_DIRECTV in hass.data.
* Fixed flake8 issue
Fixed flake8 issue
* Added available property
Added available property
* Updated to use get_locations()
Replaced doing the request for getLocations with the get_locations() API from DirectPy instead.
* Fix for checking if device is available
Fix for checking if device is available and small update to debug log message.
* Fixed lint issue
Fixed lint issue with unused variable by adding ingore for it as this is for a enumerate
* Updated try/except and removed available
Updated tr/except having the except by the statement we're doing except on.
Removed available, will be a different PR.
* Updated known_devices to be tupples in a set
Updated known_devices to be a tupple in a set, removing loop to determine if client was already added.
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Fix issue in checking if DTV device is already configured
If a DTV device was configured before, then discovery would add this device again seperately if the name specified in the configuration is different from the name on the DTV.
This issue is fixed now. Part of the fix also ensure to allow multiple "primary" devices on the network to be discovered.
Further also added debug logging to the setup_platform.
* Further improvements
Some additional improvements related to handling the DATA_DIRECTV in hass.data.
* Fixed flake8 issue
Fixed flake8 issue
* Added available property
Added available property
* Updated to use get_locations()
Replaced doing the request for getLocations with the get_locations() API from DirectPy instead.
* Fix for checking if device is available
Fix for checking if device is available and small update to debug log message.
* Fixed lint issue
Fixed lint issue with unused variable by adding ingore for it as this is for a enumerate
* Updated try/except and removed available
Updated tr/except having the except by the statement we're doing except on.
Removed available, will be a different PR.
* Add available property
Add the available property to the entiry.
* Implemented tplink_lte components and notify service
* Device discovery for the notify component
* Improved the config schema. Small fixes
* Improved login retry mechanism
* Log successful connection only on retries
* Removed CancelledError handlers and small fixes
* Test typing for helpers.__init__ and temperature
* Add type hints to helpers.sun
* Add type hints to helpers.signal
* Add type hints to helpers.entity_values
* Add type hints to helpers.dispatcher
* Refactor mysensors message handling
* Add handler module and register handlers per message type or message
sub-type. This will allow easier extension of message handling in the
future.
* Move some common functions to a helpers module.
* Add node handler and signal
* Fix inconsistent return
* Upgrade pymysensors to 0.18.0
* Fix bug in message modification.
* notify.xmpp: first working http upload
* extension guessing for upload
* docstrings, flake8, pylint
* hass.async_add_executor_job(...)
* catch more errors, allow unverified SSL request
allow user to specify unverified SSL request to URL
cleaner code
catch more exceptions
* pylint
* catching XMPP exceptions, timeout for requests call
removed calls for roster and presence
added timeout for upload request call
cleared up debug, info, warning messages
cleared up requests call for secure and insecure retrieval of image
catching IqError, IqTimeout, XMPPError from slixmpp
docstring updated
* added timout for http upload of local files
* timeout, mimetypes, random filenames
guessing filetypes and mimetypes with stdlib mimetypes
setting a random filename for privacy
working around slixmpp timeout issues with asyncio.wait_for
* code cleanup
* added file upload for rooms/groupchats
* version bump for slixmpp to 1.4.1
added NotConnectedError, removed double catches of IqErrors
removed asyncio import
* slixmpp 1.4.1 in requirements_all
* added url and path templating
* Minor changes
* fixed review requests
fixed possible path issue for foo/../bar/ paths
fixed possible access for non-whitelisted files
fixed None or X
fixed try-else block, moved else block into try
fixed raising error in upload_file if url is None
fixed using data.get after it's already been checked
fixed added docstring for tiny get_url function
* Adds Tautulli as a sensor platform.
* Remove blank last line.
* Rewrite the platform to comply with review.
* Linting issues.
* Remove tailing newline.
* Corrected typo
* Correcte check_connection, removed wierd defaults, added line in imports, removed unused var, use the correct user list.
* Use dict[key] for required config options.
* Minor changes
* Remove FFmpeg input tests
* Not needed here
* Removing tests for removed functionality
* Minor lint
* Fix tests to reflect removed config option
* Remove async service registration by request
* More lint
* Unused imports
* Make it a non-breaking change
* Update ffmpeg.py
* Remove FFmpeg input tests
* Not needed here
* Removing tests for removed functionality
* Minor lint
* Fix tests to reflect removed config option
* Remove async service registration by request
* More lint
* Unused imports
* Make it a non-breaking change
* Update ffmpeg.py
* initial tensorflow image_processing component
* linting fixes
* make displayed attribute a summary of objects
* fix missed merge conflict and add warning supression back in for CPU type
* restructure tensorflow component to install on the fly, remove from Docker
* add both matches and summary as attributes
* address review comments
* do not use deps folder as default, as it should only be managed by HA. Update to have tensorflow in root config directory
* Added service select_video_output and video_out attribute
* Fixed white lines and long lines
* Made line shorter
* Added period to comment according to flake8 rules
* Imported domain const
* Prefixed service with platform name
* changed "video output" to "hdmi output" to better reflect eiscp cammand
* video_output to hdmi_output rename
* Allow Microsoft face detection to handle updating entities when no face is detected
* Remove microsoft_face_detect_no_face_detected.json and hard code in simple empty list into the tests
* Added error handling for sense API timeouts
* Moved imports in function
* Moved imports to more appropriate function
* Change exception to custom package version
* Updated sense_energy library to 0.4.2
* Added binary sensors for individual devices
* Whitespace updates
* Split into component, sensors, binary sensors
* Fixed whitespace
* Fixed whitespace
* Moved time constant into sensor file
* Regenerated requirements
* Fixed whitespace
* Updated component dependency
* Fixed whitespace
* Code cleanup
* High and low target temps are also supported if target is supported
* Revert "High and low target temps are also supported if target is supported"
This reverts commit 66b33dc2b8.
* Added all sense components to .coveragerc
* Added check authentication exception
* binary/sensor platforms loaded in setup
* Changed to add all detected devices
* Changed to add all sensors on setup
* Code cleanup
* Whitespace
* Whitespace
* Added sense as requirement for platform
* pylint fixes
* Whitespace
* Switched requirement to dependency
* Made non-class function
* Whitespace
* Removed unneeded checks
* Increased API delay to 60 seconds
* Added guard clause for discovery_info
* Tidy code
* Whitespace
* Add surround programs to zone 2+
Add surround programs and surround program to any zone that supports it.
* Update yamaha.py
removed double fetching.
* Ignore min_cycle_duration when manually controlling the thermostat.
* style
* Generic thermostat: add minimum cycle duration to keep-alive tests.
There was a bug in previous versions of the code, that would not execute
the keep-alive action if the minimum cycle duration hasn't passed.
This test verifies that the keep-alive action is executed correctly.
* Generic thermostat: added tests to verify that changing the
thermostat mode manually triggers the switch, regardless of
minimum cycle duration.
* Updated tests to use `common` module instead of the deprecated `climate`
* Change of behaviour. Allow user to configure either a position topic or a state topic but not
both.
* optimistic mode in set_cover and tests added
* optimistic mode in set_cover_position using percentage_position
* fixes accroding to Martin review.
* added validation schema for set_position_topic and get_position_topic
* check only set_position_topic in supported_features.
* Multidoc string fix.
* Add a component for GreenEye Monitor
[GreenEye Monitor](http://www.brultech.com/greeneye/) is an energy
monitor that can monitor emergy usage of individual circuits, count pulses
from things like water or gas meters, and monitor temperatures. This component
exposes these various sensors in Home Assistant, for both data tracking and
automation triggering purposes.
* Consolidate sensors
* lint
* .coveragerc
* - cv.ensure_list
- DOMAIN, where appropriate
- defaults to schema
- single invocation of async_load_platform
- async_create_task instead of async_add_job
- fail if no sensors
- monitors required
- async_add_entities
- call add_devices once
- remove unused schema
- use properties rather than set fields
- move _number and unique_id to GEMSensor
- remove unnecessary get(xxx, None)
- keep params on one line when possible
- new-style string format
* Fix `ensure_list` usage, log message
* Pass config through
* Add problem text to message if available
* Revert "Add problem text to message if available"
This reverts commit 7be519bf7f.
* Cleanup setup
* Add message template support
* Fix for failing test
* Added tests
* Refactor changes
* Fix lint violation
* Fix failing tests
* Unify handling for message and done_message parameter and sending function
* Update tests
* Fix lint warnings
* Added functionality to the version sensor.
* Corrected typo.
* Change default name to not cause a breaking change.
* Use vol.lower in the schema.
* Add missing blank line.
* Change order of cv.string and vol.Lower.
We were erroneously reporting the _previous_ mode. So if the thermostat was off
and the user asks, "Alexa, set the thermostat to heat", the thermostat would be
set to heat but Alexa would respond, "The thermostat is off."
Bug caught by @Thunderbird2086 at
https://github.com/home-assistant/home-assistant/pull/17969#issuecomment-434654345
* Move components/opentherm_gw.py to components/opentherm_gw/__init__.py
* Update requirements-all.txt
* Await set_clock coroutine rather than scheduling it.
* Create task for async_load_platform
* Upgrade to asuswrt 1.1.1 to better handle mac addresses with letters in them
Signed-off-by: Gavin Mogan <git@gavinmogan.com>
* Update requirements_all as well
Signed-off-by: Gavin Mogan <git@gavinmogan.com>
* Fix Vera climate component to use correct states
Changed the Vera climate component so it uses the STATE_* states from the base climate component. This will allow it to work with Google Assistant.
* Wemo Humidifier - Initial Commit
* WeMo Humidifier - First draft of component
* WeMo Humidifier - Removed direct IO from property
* WeMo Humidifier - Trivial comment change
* Added myself as codeowner for WeMo
* WeMo Humidifier - Fixed various syntax & lint issue
* WeMo Humidifier - Small comment addition
* WeMo Humidifier - Fix TypeError: 'WemoHumidifier' object is not iterable
* WeMo Humidifier - Rename set humidity service
* WeMo Humidifier - Add to .coveragerc
* WeMo Humidifier - Fixed lint/pylint issues
* WeMo Humidifier - First round of requested changes
* WeMo Humidifier - Round two of requested changes
* WeMo Humidifier - Third round of requested changes
* WeMo Humidifier - Fixed whitespace issue on dict comprehension
* WeMo Humidifier - Fourth round of requested changes
* WeMo Humidifier - Corrected typo in async_add_executor_job call
* WeMo Humidifier - Fixed spacing before inline comments
* Change date at sunset
* Fix tests to actually run and add fix to component
* Make tests pass
* Use get_astral_event_next instead of get_astral_event_date
* Revert to using get_astral_event_date
* Make tox happy: reset state on tearDown
* Switch mailgun webhooks to the webhook api
* Change mailgun strings to indicate application/json is in use
* Lint
* Revert Changes to .translations.
* Don't fail if the API key isn't set
* Reverse out change #14234 BOM Weather throttle fix
Reverted back to original throttle code to ensure sensors are updated on time.
* Fixed lint issues
* Review as a commit
* Use last_updated for attributes
* lint
* lint
* Refactor Alexa API to use objects for requests
This introduces _AlexaDirective to stand in for the previous model of passing
basic dict and list data structures to and from handlers. This gives a more
expressive platform for functionality common to most or all handlers.
I had two use cases in mind:
1) Most responses should include current properties. In the case of locks and
thermostats, the response must include the properties or Alexa will give the
user a vague error like "Hmm, $device is not responding." Locks currently work,
but thermostats do not. I wanted a way to automatically include properties in
all responses. This is implemented in a subsequent commit.
2) The previous model had a 1:1 mapping between Alexa endpoints and Home
Assistant entities. This works most of the time, but sometimes it's not so
great. For example, my Z-wave thermostat shows as three devices in Alexa: one
for the temperature sensor, one for the heat, and one for the AC. I'd like to
merge these into one device from Alexa's perspective. I believe this will be
facilitated with the `endpoint` attribute on `_AlexaDirective`.
* Include properties in all Alexa responses
The added _AlexaResponse class provides a richer vocabulary for handlers.
Among that vocabulary is .merge_context_properties(), which is invoked
automatically for any request directed at an endpoint. This adds all supported
properties to the response as recommended by the Alexa API docs, and in some
cases (locks, thermostats at least) the user will get an error "Hmm, $device is
not responding" if properties are not provided in the response.
* Fix setting temperature with Alexa thermostats
Fixes https://github.com/home-assistant/home-assistant/issues/16577
* Update Avi-On to work with the API.
* Use voluptuous defaults instead of .get()
* Bump library version.
* Remove unnecessary voluptuous defaults. Fix manually-configured devices.
API-discovered devices are already Avion objects, but manually-configured devices need to be instantiated as Avion objects first.
* Use .get() where appropriate.
* Remove default
* 🌧 Meteo France rain forecast
* do not fail on wrong config
* Update name of sensor class
* do not show sensor if not working
* Update .coveragerc
* ability to submit insee location code without final 0 needed by meteo-france
* Lynting
* more lynting
* update comment
* block comment linting
* reducing length of long lines
* linting
* Update météo-france platform
Now work with pypi package and monitored conditions
* remove error log
* Update requirements_all.txt
* Increase scan interval to 5 minutes
* Update meteo_france according to review
* better error handling of location missing some monitored conditions
* fix lint error
* moving error log
Errors are now catched at sensor initialization and state is set when updating the data
* Update updating of sensor
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Attribute last position update only updated when position changed.
The attribute media_position_updated_at will only be updated if the position changed (thus media is playing for recorded or live TV).
Added assumed_state; will be set to False if in standby or when a recorded show is watched. For live TV it will be set to True.
* Added some empty lines for easier reading
Added some empty lines before returns to improve readability.
* Seperated words in constants
Seperated the words in constants.
* Fix _lastupdate to _last_update
Split words in _lastupdate to _last_update as I missed it.
* Add type hints to helpers.intent and location
* Test typing for helpers.icon, json, and typing
* Add type hints to helpers.state
* Add type hints to helpers.translation
* Migrate dialogflow over to the new webhook component
* Updating dialogflow unit tests
* Lint
* Revert changes to HomeAssistantView
* Use json_response from aiohttp
* Raise PlatformNotReady if API not available
* Delete whitespaces
* Revert unwanted breaking changes
* Revert deleted line
* Update homeassistant/components/sensor/rmvtransport.py
* Use await asyncio.wait
* Add test that tests unloading on remove
* Add more test things
* Untangle entity remove code from entity platform
* Don't add default implementation of async_will_remove
* Keep entity weakref alive
* Add test that tests unloading on remove
* Add more test things
* Untangle entity remove code from entity platform
* Don't add default implementation of async_will_remove
* Keep entity weakref alive
* Restore manual alarm-control-panel state using async_get_last_state
This is to address issue #10793
* Added tests for restoring manual alarm state on startup
* Cleaned up test formatting
* Fixed more linting errors
* Changed async methods to use asynch/await syntax
* Removed unused asyncio import
Zigbee Alliance has changed their stylized writing (and logo) of the Zigbee name from “ZigBee” to “Zigbee”, as in they are no longer writing Zigbee with a capital “B” in the middle of the name.
* Fix discovery-dependency for upnp
* Only delete port mappings on EVENT_HOMEASSISTANT_STOP + refactoring MockDevice
* Call and store local_ip from async_setup
* Don't depend on http-component
* Remove discovery dependency
* Bug fix
Current version causes 500 error since it is sending an array of from numbers to ClickSend. Changing the from number to 'hass' identifies all messages as coming from Home Assistant making them more recognisable and removes the bug.
* Amendment
Changed it to use 'hass' as the default instead of defaulting to the recipient which is the array. Would have worked if users set their own name but users who were using the default were experiencing the issue.
* Added DEFAULT_SENDER variable
* Add ws get, set card
* lint+fix test
* Add test for set
* Added more tests, catch unsupported yaml constructors
Like !include will now give an error in the frontend.
* lint
* zone trigger supports entity id pattern
* fixed lint error
* fixed test code
* initial version of new geo_location trigger
* revert to original
* simplified code and added tests
* refactored geo_location trigger to be based on a source defined by the entity
* amended test cases
* small refactorings
Will set the available property to False if unable to communicate with August lock or doorbell.
HTTP request errors (i.e. timeout, connection error, HTTP error) will not result in traceback. Instead an error will be logged.
This prevents the following traceback that will otherwise occur.
Traceback (most recent call last):
File "/usr/local/lib/python3.6/concurrent/futures/thread.py", line 56, in run
result = self.fn(*self.args, **self.kwargs)
File "/usr/local/lib/python3.6/site-packages/homeassistant/components/device_tracker/bluetooth_le_tracker.py", line 107, in update_ble
see_device(address, devs[address], new_device=True)
File "/usr/local/lib/python3.6/site-packages/homeassistant/components/device_tracker/bluetooth_le_tracker.py", line 47, in see_device
see(mac=BLE_PREFIX + address, host_name=name.strip("\x00"),
AttributeError: 'NoneType' object has no attribute 'strip'
* Switch mailgun to use webhook api
* Generalize webhook_config_entry_flow
* Add tests for webhook_config_entry_flow
* Add tests for mailgun
* Remove old mailgun file from .coveragerc
* Refactor WebhookFlowHandler into config_entry_flow
* Remove test of helper func from IFTTT
* Lint
* Bug fix
Current version causes 500 error since it is sending an array of from numbers to ClickSend. Changing the from number to 'hass' identifies all messages as coming from Home Assistant making them more recognisable and removes the bug.
* Amendment
Changed it to use 'hass' as the default instead of defaulting to the recipient which is the array. Would have worked if users set their own name but users who were using the default were experiencing the issue.
* Added DEFAULT_SENDER variable
* Resolves /home-assistant/home-assistant#17433
Away mode temperature issue fix for generic_thermostat
* Debug messages removed from generic_thermostat.py
* Test for repeat away_mode set
Test for fix of generic thermostat issue when away_mode was set several times in a row.
* Code style fix in generic_thermostat
* Remove blank line in the end of generic_thermostat
* Fix style
* zone trigger supports entity id pattern
* fixed lint error
* fixed test code
* initial version of new geo_location trigger
* revert to original
* simplified code and added tests
* refactored geo_location trigger to be based on a source defined by the entity
* amended test cases
* small refactorings
* Add ws get, set card
* lint+fix test
* Add test for set
* Added more tests, catch unsupported yaml constructors
Like !include will now give an error in the frontend.
* lint
* New rtorrent sensor
* Fix lint issue
* Fix another lint issue
* Fix pylint issue
* how many python linters do you guys use
* Cleanup code
* python linting
* newline
* Added support for dyson hot+cool fan as climate device
* Removed decimal place in kelvin units conversion
Minor edits to be consistent with Dyson's internal conversion of temperature from kelvin to celsius. It does not include decimal place to convert between kelvin and celsius.
* made changes according to comments
* Refactored target temp logics, fixed enum issues
* changed name of component to entity
* removed temperature conversion for min/max property
* changed back to 644 permission
* added extra tests for almost-all coverage
* changed assert method to avoid lack of certain method in py35
* added test_setup_component
* shorten line length
* fixed mock spec and added checking of message listener is called
* added doc string and debug msg
* shorten line length
* removed pending target temp
* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* Fix linky sensor login error
* Make platform fail-safe
Adding following enhancements:
* Make sure the platform loads correctly by making the first API request in setup_platform.
* Close the session after each API call.
* Use timeout parameter everywhere.
* Fix Hound CI error: line too long.
* Update pylinky library
* Remove LinkyClient from update()
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '
* Add doorsense sensor for August 3rd Gen Smart Lock Pro
Add a binary sensor to August for the August 3rd Gen Smart Lock Pro doorsense sensor.
This is a re-do from PR 17116 https://github.com/home-assistant/home-assistant/pull/17116 that I closed due to rebase issue on my end.
* Changed to use snjoetw provided code
Going through the py-august I found that snjoetw had provided updated versions for the august component (august.py and binary_sensor/august.py) to include DoorSense sensor.
Changed what I did to to what snjoetw provided instead as he split it into 2 classes; much cleaner I think.
I modified his coding with:
Fixes that were done to the August component and not part of the coding snjoetw provided.
Added the debug logging improvement I had done in the code.
Note, fix I committed earlier for lock atribute (lock/august.py) is thus still the same.
* Reverted change from add_device to add_entities
Missed an item when merging snjoetw's code with current. Fixed.
* Updated call from add_devices to add_entities as well
Updated the call from add_devices to add_entities.
* Fixed permissions on files
Fixed permissions on components/august.py and binary_snesor/august.py
* Changed if/else to if/continue
Changed logic so that if the door sensor state is unknown during initalization the debug log is written and then continue the loop instead of using if/else logic.
* Added available property for Door Sensor
Added the available property for the Door Sensor and setting it to False if a status unknown is received.
* Updated setting self._available
Changed line for setting self._available to what Martin provided. Much more efficient to read. :-)
* Add OpenTherm Gateway sensor platform.
* Add OTGW_ variables to list of supported sensors.
* Order imports.
* Add OpenTherm Gateway binary sensor support.
* Revert "Add OpenTherm Gateway binary sensor support."
This reverts commit 115acaa912.
* Import COMP_SENSOR from sensor component rather than defining it.
* Update opentherm_gw sensor platform docs url.
* Update dependency to v0.2b1
Old version had incorrect variable names for some of the sensors
* Update requirements_all.txt
* Address review findings.
* Update .coveragerc
* Add LG soundbar support
We can autodiscover these, so for now let's skip any local configuration.
Currently we expose volume, source and equaliser preset - we can expose the
other volume controls and options as well if necessary, but I don't know
whether it's worth it.
* Add discovery of LG devices
This is a generic discovery type that doesn't obviously contain enough
information to identify whether we're talking to a speaker system or any
other kind of device - on the other hand I haven't been able to find any
other LG devices that respond like this, so we can cross that bridge when
we get to it.
* Lint
- Bump twilio requirement to latest 6.19.1 version
- The generic response type is gone in the latest
versions of the twilio package. It appears we were
generating an empty response just to get the empty
xml body. TwilML is the new base class all responses
inherit from. So I've switched the code over to using
and empty TwilML object instead.
- The exception type was moved to a different location.
* Validate ports as port
Better than just a positive integer since it limits the range from 1 to 65535.
* Validate port for Axis
* Validate port for Xiaomi Home Camera
* Validate port for Modbus
* Validate port for Yamaha MusicCast Receivers
* Update zhong_hong.py
Validate port as a port, the gateway address as positive_int
Also moved the default values to their variable
* Validate port for the Asterisk Voicemail interface
* Fix lint
* Validate port for Xiaomi Cameras
* Initial changes to resolve issue 16733
Added logic to ensure that if the state is unknown during startup that the error about being unable to parse the value is not logged.
Further, also ensured that if an attribute is set to None it does not try to convert the None value to Fahrenheit as that will cause an error.
* Cleaned up and added few comments
Cleaned up some lines based on flake8 and pylint.
Added some comment lines on the items added.
* Changed to async and using async_added_to_hass
Changed sensor to use async.
Registering state tracking for sensors and initial setup is now done upon the home assistant start event.
* Updated test and small fix
Updated test to handle unavailable state of sensor and return of None for attributes when data is unavailable.
Ensured that atributes are set to None when state is unavailable due to incorrect data.
* Fixed some flake8 issues in test
Fixed some flake8 issues in test_moldindicator.py.
* Updates based on review
Updates based on review from MartinHjelmare
* Added sensor entity_id to logger errors
Added sensor entity_id to logger error messages
Update test to use constant STATE_UNKNOWN instead of fixed string.
* ID is added to cards without ID in ui-lovelace.yaml when loaded
* Hound
* Remove ui-lovelace.yaml
* Nicer get
* Update tests
* If YAML dump fails, config not gone
* Add tests
* Woof!
* Remove nosetests
* Address comments
* Woof...
* Delete test.yaml
* update rights to saved file
* fix
* line break
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* add capability for manually specifying IP and port of Konnected device(s)
* add config options for blink and discovery settings
* import konnected only in functions where needed
* updates from code review feedback
* convert manual_discovery to async
* code review updates; use correct sync vs async
I believe this adds registry support. The UI allows me to change
the entity ID now.
For example, a light bulb called "BasementHallLight" in the Vera
has an initial Entity ID like light.basementhalllight_108, where
108 is the unique ID that the Vera assigned the device when I
added it to the z-wave network.
Now I can use the UI to change the Entity ID to
light.basementhalllight and I can still turn it on and off.
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
* Fix rangefilter
RangeFilter would break for lower or upper bounds of 0, evaluating to False and thus not being handled correctly as bounds
* Add test for zero bounds
* Migrate CONF_WEBHOOK_ID to homeassistant.const
* Switch over all instances of webhook_id to the const
* Switch last instance of webhook_id to the const
* automation: conf constants for conf
* webhook: conf constants for conf
* new lib dependencies, working old xmpp
* non working aioxmpp
* reverting to sync xmpp
will try slixmpp instead of aioxmpp
reasons:
echo bot example of aioxmpp had blocking behavior (slixmpp echo bot works fine)
closer API to sleekxmpp
less dependencies than aioxmpp
* first working slixmpp version
* DEBUG messages, changed MUC call
the joinMUC method changed from sleekxmpp to slixmpp
added debug messages
better name for cleanup callback
* flake8
* little cleanup, tested MUC
* requirements_all
* dependencies managed by slixmpp, removed debug messages
* resource configurable by user, requirements updated
* changed __init__ parameter code format
* removed trailing dots from LOG messages
* changed super call to python3 format
* Clean up leftover config schema option
* Allow import groups via new config yaml setup
* Fix and add test
* Add a test without groups for legacy import
* Change default import groups to False
* Fix I/O in test
* Provide an individual color temperature range per Yeelight model
* Fix lint
* Bump yeelight version
* Remove unused const
* Enable SUPPORT_COLOR_TEMP for BulbType.WhiteTemp
* Add notify.homematic_signalgen
* Update homematic_signalgen.py, test_homematic_signalgen.py
* Added new files to .coveragerc
* Fixed review comments from houndci-bot
* Fixed pylint errors
* Regenerate requirements_test_all.txt by script/gen_requirements_all.py
* Fix flake8 warnings
* Renamed notify.homematic_signalgen to notify.homematic and made it generic
* Update .coveragerc and requirements_test_all.txt
* Removed the terms signal generator from the sources.
* Support abbreviations in discovery topic
* Add abbreviations for all words. Add testcase.
Add missing docstring.
* Add missing abbreviations
* Support topic prefix
* Update test case
* Restrict topic prefix
* Fix merge
* Simplify abbreviations expanding, assume TOPIC_PREFIX is one character long
* Support abbreviated keys instead of words
* Remove redundant abbreviations
* Remove extra spaces in abbreviation list
* Make topic prefix less restrictive
* Make topix prefix a bit more restrictive again
* Add permission foundation
* Address comments
* typing
* False > True
* Convert more lambdas
* Use constants
* Remove support for False
* Fix only allow True
* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Implement turn_off and turn_on actions for eq3btsmart
This commit implements the turn_off and turn_on methods for eq3btsmart. Turning the device off will set the thermostat to "OFF". Turning it on will set it to "AUTO".
* Add missing support flags for on/off feature
* Fix line length
* Enable BMW component to be unit system aware
* lint fixes
* use constants for config entries
* remove configuration from component and rely only on HA config of unit_system
* remove unused import
* update code to reflect feedback
* lint fixes
* remove unnecessary comments
* rework return statement to satisfy pylint
* more lint fixes
* add tests for volume utils
* lint fixes
* more lint fixes
* remove unnecessary comments
* Clean up leftover config schema option
* Allow import groups via new config yaml setup
* Fix and add test
* Add a test without groups for legacy import
* Change default import groups to False
* Fix I/O in test
* Made it possible to define multiple octoprint printers
* style fix
* Added configuration option for octoprint port
* SSL support in octoprint platform configuration
* Octoprint component now auto loads sensor and binary_sensor platforms
* preliminary support for auto discovery of octoprint servers
* Moved sensors and binary sensors configuration into main octoprint configuration
* Using base_url as the key for storing api in the octoprint component
* made sure to not supersede the platforms' domains
* bugfix: continue setting up other printers if one fails
* flake8 style correction
* Added icons to sensors
* Fail platform setup if no printers were successfully added
* Simplified custom validator
* Add support for sound_mode for Yamaha rxv media_player
* Catch ParseError Exeption on surround_program for unsupported models
* Catch all Exeptions from rxv
* only get sound mode list / current sound mode on main_zone
* Don't set initial temperature in non-optimistic mode
* Fix tests
* Don't set initial values in non-optimistic mode
For fan mode, current operation and swing mode
* Fix tests again
* Initial Z-Wave Config Entry Support
* Use conf.get() for config import
* Uncomment test
* Re-add line breaks
* tabs -> space
* Unused import cleanup & lint fixes
* Remove unused config flow link step
* Address comments
* Remove unused import
* Fix tests
* Check for valid usb_path
* Test for Z-Stick in config flow
* Pass config dir to ZWaveOption
* Auto-generate Network Key if none provided
* Test fixes
* Address comments & more start network service registration
* add_executor_job for options.lock()
* SMHI Component
* Clean up typos
* Fixed default values first config to home location (tests will follow)
* Fixed tests and removed unused function
* Minor fixup after comments from @kane610
* add support for precipitation in forecast
* Removed old async_step_init not needed.
* Add support for monitoring the temperature of a thermoworks smoke thermometer.
* Use string formatting.
* Add line break.
* Add error handling for authentication.
* Fix linting errors.
* Fix quotes.
* Bump thermoworks_smoke library version.
* Review changes for @MartinHjelmare
* Add unique id attribute and change battery attribute to the standard "battery_level".
* requested changes to snake case and monitored conditions
* fix lint error
* exclude firmware from state attrs. rename original_unit to unit_of_min_max so it's more clear what it is for.
* add device_info
* add regex validator for exclude
* undo device info stuff
* remove serial number from attributes even though other components are allowed to have it...
* exclude firmware
* Daikin Climate - Better integration with Climate base component
Made some modification in order to better integrate the Daikin AC Component with the base Climate Component.
Benefits are:
Support localization for Operation Mode
Support for Homekit Integration (if the AC is turned On, now the status is updated in Homekit)
* Build bug fixing
* Bug fixing in Set Operation_Mode functionality
Fixed to .title() functionality in matching the Operation_Mode
* Fix useless code
* Fix hound bug
* Bug fixing
Change in list of Operation Mode
* Trailing white space fix
* Compile fixing
* Whitespace fix
* Moved econet to water_heater
* Wink and Econet are now in water heater!
* Removed away mode from econet and added demo water heater
* Added demo tests
* Updated coveragerc
* Fix lint issues.
* updated requirements all
* Requirements all actually updated.
* Reset wink and econet and fixed service.
* Reset wink and econet to the correct dev state
* Reset requirements_all and .coveragerc and removed the new econet and wink water_heater files
* Removed @bind_hass service methods
* Actually reset the .coverage file
* Fixed the tests
* Addressed @MartinHjelmare's comments
* Removed unused import
* Switched to async_add_executor_job
* Fixed lint
* Removed is_on
* Added celsius demo water heater and tests.
* Removed metric import
* Add additional model name of the Xiaomi Aqara Button (WXKG11LM)
* Add additional model name of the Xiaomi Aqara Wireless Switch (WXKG02LM, WXKG03LM)
* Bump PyXiaomiGateway version
* Fix Todoist custom project update
Custom projects were not refreshing the API state and were using
local/stored state. This resulted in invalid tasks being retained upon
update. This change resets the local Todoist API state, syncs it, and
then continues normal update operation(s) on the Todoist project data
object.
* Remove blank line after docstring
* Update logging call
* Simplify logging
Allows the Danfoss/Devolo RS Room Sensor thermostat to be discovered as climate device in homeassistant.
This device is defined as GENERIC_TYPE_MULTILEVEL_SENSOR, and not GENERIC_TYPE_THERMOSTAT.
Ref: https://community.home-assistant.io/t/devolo-zwave-thermostat/58739
* YesssSMS handling more errors, upgrade to version 0.2.1
- handling missing internet connection nicely
- disabling login with non-working credentials (website locked account for 1 hour)
- upgrade to new upstream version of YesssSMS
* notify.yessssms tests
* test requirements
* flake8 fix
* fixing tests, new upstream version 0.2.3
fixing tests based on requested changes, coverage
* removing unmotivated print
* passing exception to ConnectionError and SMSSendingError logger
* Pass headers to webhook handler
* Refactors webhook component to post Request object instead of data
* Update webhook tests
* Cleanup webhook test and fix a bug in ifttt
* Address code review comments
* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
* Fixed file corruption bugs in private storage code.
* Restoring fixed test case.
* Implemented test suite for utils/json.py
* Added new unit test cases for util/json.py
* Dixed formatting nags
* Fixed more nags from the Hound
* Added doc strings to some very short functions
* Fixing lint's complains about my choice of parts of speach. Sigh.
* Moved atomic save operations down into util/json.py so that all benefit.
Added extra clean-up code to ensure that temporary files are removed in
case of errors.
Updated emulated_hue unit tests to avoid errors.
* Apparently 'e' is not allows as a variable name for an exception...
* Initial commit
* Sockets have been moved to separate component
* Sockets have been moved to separate component
* Fix const PLATFORM_SCHEMA
* Fix unique id
* Fix async_create_task
* Fix PLATFORM_SCHEMA
* Fix typo
* Remove pylint disable
* Google Maps supports battery level and charging.
With 3.0.2 locationsharinglib now the battery level and the charging attributes are available.
* Update google_maps.py
fix too long line error
* Update google_maps.py
Fix multi line import, and line length limit
* Update gen_requirements_all.py
Add locationsharinglib to gen_requirements_all
* update requirements_all
* Last try to fix requirements_all...
* Add zwave.network_complete_some_dead event
* add missing comma
* typo
* Add SIGNAL_AWAKE_NODES_QUERIED_SOME_DEAD Test
* Add blank lines
* fix linter warnings
Line too long
* remove trailing whitespace
* Change test signal
* Listen to other event
Add `unique_id` to all rachio entities
Add platform discovery to rachio component
Move config options from switch.rachio platform to the rachio component
* Add support for Honeywell evohome CH/DHW systems
More flake8 corrections
Passes Flake8 tests
Almost passed flake8.pylint!
Passed all tox tests
Now it needs serious testing!
Almost ready to submit
BUGFIX: DHW state now functional
More improvements to available()
Solved the DHW temp units problem!
Last minute bug squash
to improve dicts merge
Trying to rebase
fixing more rbase errors
revert to creating HTTP_error_code internally for now
ready to submit PR
Added support for Honeywell evohome CH/DHW systems
* Updated requirements_test_all.txt
* Fix: D401 First line should be in imperative mood
* Remove _LOGGER.info (replace with _LOGGER.debug)
* raise PlatformNotReady when RequestException during setup()
* Revert some LOGGER.debug to LOGGER.warning
* Improved logging levels, and removed some unwanted comments
* Improvments to logging - additional self._status info
* BUGFIX: DHW wrongly showing available = False (and some other tweaks)
* Fix trailing whitespace
* Remove state_attributes override and API_VER code
* Removed heating zones, DHW and heuristics to reduce # lines of code
* Removed some more lines of code
* Removed unused configuration parameters
* Remove some more un-needed lines
* Removed more (uneeded) lines of code & fixed two minor typos
* Improvements to debug logging of available() = False
* Improvements to code, and code clean-up
* Corrected a minor typo
* A small tidy up
* reduces precision of emulated temps floats to 0.1
* Some code improvements as suggested by JeardM
* Rewrite of exception handler
* Removed another unwanted logging in properties
* Remove async_ version of various methods
* moved available heuristics to update()
* Cleanup of code, and re-work linter hints
* fixed a minor documentation typo
* scan_interval is now no longer a configurable option
* Change from Master/Slave to Parent/Child
* Removed the last of the slaves
* Removed the last of the masters
* Move -PARALLEL_UPDATES to .\climate\evohome.py'
* main code moved to climate/evohome.py
* merge EvoEntity into EvoController class
* remove should_poll (for now)
* woops! left a hint in
* removed icon
* only log a WARNING the first time available = False
* cleanup dodgy exception handling
* Tidy up exception handling
* Many changes as suggested by @MartinHjelmare, thanks
* remove hass from init, part 1
* use async_added_to_hass instead of dispatcher_connect
* remove hass from init, part 2 (done)
* add 1-2 arrays, and tidied up some comments
* from dispatcher to async_added_to_hass
* cleaned up some logging, and removed others
* Many changes as request by @MartinHjelmare
* Homage to the lint
* Changed to the HA of doing operating_mode
* Now using update_before_add=True
* reduced logging further still...
* fixed minor lint
* fix a small logic error
* Add device_state_attributes to track actual operating mode
* Clean up doc quotes caused by previous changes
* Woops! removed some debug lines that shoudln't have stayed in
* Add a complete set of device_state_attributes
* Cleanup some constants
* Remove more legacy code
* domain_data to evo_data & this else should be a finally
* minor change for readability
* Minor change for readability #2
* removed unused code
* small tidy up - no code changes
* fix minor lint
* Correct URLs & descriptions in docstring
* whoops - fixed a typo in docstrings
* remove an unused line of cide & a small tidy-up
* Add services for getting and setting indicator values for Z-Wave
* Add service to manually refresh Z-Wave node value by value_id
* Remove refresh_indicator service
* Coerce to int
* Add generic set_node_value service
* Remove set_indicator service
* Addded support for private storage.
Include 'private' flag parameters to the Store class and save_json function.
Updated various authentication and onboarding classes to use private stores.
Fixed unit test for emulated_hue which used a mock patch on save_json().
* Fixed Hound formatting issues not detected by local linting.
* Updates to GitLab Sensor
* Updates to GitLab_CI sensor.
* Added GitLab_CI sensor.
* Updated interval to a more appropriate 300 seconds.
* Added GitLab_CI.py to ommitted files.
* Initial refactor to use python-gitlab PyPI module.
* Fixes to dict parsing.
* Updated required packages for GitLab_CI requirements.
* Updates and refactoring to more closely align with Home-Assistant standards.
* Moved import to init, removed unreachable requests exception.
* Removed references to STATE_UNKNOWN and replaced with None
* Removed extra whitespace
* Changed PLATFORM_SCHEMA and renamed add_devices.
Changed PLATFORM_SCHEMA to use SCAN_INTERVAL and add_devices to add_entities
* Added configurable name, changed logger and removed cruft.
* Removed _status to use _state instead, as both held same value.
* Fixed ATTR_BUILD_BRANCH, removed more extraneous cruft.
* Changed required config keys to dict[key] format.
* Removed extraneous CONF_SCAN_INTERVAL as it's already defined.
* Use pyspcwebgw library.
* Support alarm triggering.
* Update requirements.
* Add pyspcwebgw to test reqs.
* Also update script.
* Use dispatcher.
* Address review feedback.
* Add configurable host for bbox routers
Add configurable host for bbox router running on non-default IP addresses.
* Fix unused import
Fix unused import which also resolves "line too long"
* Fix wrong import order
* Update validation
* Bump sucks (Ecovacs) lib to 0.9.3
Changed code that was in place as a workaround pre-0.9.2. This version bump fixes a few issues.
* Update requirements_all
* initial version of geojson platform
* unit tests for geo json platform added; smaller bugfixes and code cleanups
* fixing pylint issues
* moved all code accessing the external feed into separate library; refactored platform and tests to work with that new library
* fixing lint
* small refactorings
* Refactored units and icons for the Dyson sensors
* Adapted unit tests to the new device names and unit of measurements
* Use None as empty unit of measurement
* Unrelated overall improvements following code review
* Adapted tests to new constructors as per previous commit
* Make sure the sensors have their `hass` attribute set in the test environment
* create binary sensor even if initial update fails
* fixed broken test assertion
* fixed broken test assertion
* avoid fetching resource twice - manually in the setup_platform and then through add_devices
* raising PlatformNotReady instead of creating the sensor if the initial rest call fails; throttling the update to avoid fetching the same resource again immediately after setting up sensor
* rolled back throttling of the rest update call; can still avoid updating the binary sensor's rest resoure twice; fixed tests
* typo
* switch.zha: Schedule state update.
if turning switch On or Off operation was successful, then schedule
state update
* switch.zha: Update debug logging.
* Added Logi Circle platform, camera and sensor
* Integrated with Logo Circle API’s feature detection to exclude sensors not supported by device. Added services for recording livestream and taking a snapshot from the livestream.
* Migrated livestream snapshot and recording functionality out of home assistant components and into the logi circle API wrapper. Added services.yaml entries for logi services.
* Added new Logi sensor types, updated to latest version of `logi_circle` and tidy up in preparation for pull request.
- Renamed `logi_set_mode` to `logi_set_config`.
- Live stream recording and snapshot methods now respect whitelisted path configuration.
- Added `streaming_mode` and `speaker_volume` sensors.
- Moved model-specific turn on/off logic to `logi_circle` library.
* Renamed `logi` component domain to `logi_circle`.
* Updates based on PR feedback
* Added timeout of 15s to logi_circle initial setup requests (login and grabbing cameras).
* Added unique ID (uses MAC address for camera platform, MAC address + sensor type for sensor platform).
* Added battery level and battery charging attributes to camera.
* Removed static attributes from device_state_attributes.
* Replaced STATE_UNKNOWN with None, replaced ‘on’ & ‘off’ with STATE_ON and STATE_OFF.
* Removed redundant SCAN_INTERVAL in sensor, removed redundant hass param from async_setup_platform in camera and sensor.
* Style tweaks.
* Replaced `asyncio.wait_for` with `async_timeout` to be consistent with other components.
* Add met.no weather component
* requirements .coveragerx
* use lib
* style
* style
* renam function to _fetch_data
* Only update once per hour
* style
* Sensor values to be updated only when required (only after the train has crossed).
Looking at the documentation on https://transport.opendata.ch/docs.html, delay information is available only on stationboard, so no need to query often if there is no "real"time info.
* Bumping up version of python_opendata_transport to 0.1.4 in order to catch client errors like throttling rejection (HTTP 429)
* pleasing the hound
* bumping python_opendata_transport to 0.1.4
* De-run_forever()-ization
* Use asyncio.run (or our own implementation on Python <3.7)
* hass.start is only used by tests
* setup_and_run_hass() is now async
* Add "main" async hass.run method
* move SIGINT handling to helpers/signal.py
* add flag to .run to disable hass's signal handlers
* Teach async_start and async_stop to not step on each other
(more than necessary)
* shorten over-long lines
* restore missing "import asyncio"
* move run_asyncio to homeassistant.util.async_
* LOGGER: warn => warning
* Add "force" flag to async_stop
only useful for testing
* Add 'attrs==18.2.0' to requirements_all.txt
Required for keeping requirements_test_all.txt in sync, where it is in
turn required to prevent auto-downgrading "attrs" during "pip install"
* Fixes for mypy
* Fix "mock_signal" fixture
* Revert mistaken edit
* Flake8 fixes
* mypy fixes
* pylint fix
* Revert adding attrs== to requirements_test*.txt
solved by using "pip -c"
* Rename "run" to "async_run", as per calling conventions
* Initial commit for jewish calendar sensor
* Make check for logging errors into it's own function
* Can't use f-strings as we need to support python3.5
* Implement basic functionality: printing of date
* Update requirements_all.txt
* Allow user to specify date for sensor
* Add hdate to test requirements
* Update to match pull request
* Support date output in hebrew
* Limit languages to english and hebrew
* Add name back to sensor
* Change icon to be calendar-today
* Add multiple sensors
* Fix tests
* Make Hound happy, remove unused imported class
* hdate expects datetime.date not datetime.datetime
* Return sensor name
* Times should be returned as time object, not datetime
* Add myself to codeowners for jewish calendar component
* Return actual reading, not index
* Add more tests. Currently failing.
Will need to update hdate API and version before continuing.
* Fix weekly portion test
* Make all tests pass
* Make travis happy and add a test so it doesnt happen again
* Remove defaults in __init__ method
* Change sensor state variable to local variable in update() method
* Minor changes
* Add endpoint entity
* Fix lint error
* Add nwk address as device state attribute
* Change to ZhaDeviceEntity
* Show last_seen only if offline
* Remove obsolete _discover_endpoint_info()
* Add bunch of RouterData tests
* Avoid raising AttributeError from RouterData.__getitem__
* Use new style string formatting
* Use {key: value} instead of dict(key=value)
* Migrating out the zoneminder platform (and camera.zoneminder) to a new library
* Clean up the global variable ZM usage
* Modify camera.zoneminder to use the new Monitor class implementation
* Refactor camera.zoneminder after latest refactor in zm-py
* Implementing changes to switch.zoneminder to use zm-py native methods
* Complete migrating over sensor.zoneminder to the zm-py library
* Tweaking ZoneMinder components from code review
* Linting fixes for the zoneminder components
* Directly assign value when turning on/off in switch.zoneminder
* Changing z-wave brightness calculation to respect 0x01 and 0x02 byte
values
* adding additional line breaks to satisfy houndci
* - Update comment style for linter
- Add additional unit test to increase code coverage
* Update zwave.py
* Added support for multiple tag managers. Fixed typo for signal strength.
* Corrected broken merge.
* Fixed flake8/pylint error.
* Improved docstring.
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Add zha.configure_reporting() method.
Binds a cluster and configures reporting for the specified attribute.
* git add homeassistant/components/binary_sensor/zha.py
* Refactor sensor.zha to use new 'configure_reporting() method.
* Zha configure reporting - switch (#1)
* use configure_reporting for zha switch
* lint fixes
* Rename variables/classes to properly reflect the content
* increasing python-websockets' version number so now it works with python 3.7
* required version for websockets increased to work with Python 3.7
* script/gen_requirements_all.py is done
* add 'default_conversations' parameter
* remove the empty message segment at the end of every message
* add 'HangoutsHelp' intent
* add hangouts/intents.py
* increasing python-websockets' version number so now it works with python 3.7
* required version for websockets increased to work with Python 3.7
* script/gen_requirements_all.py is done
* Update fan.zha platform.
switch from asyncio to async def()
catch DeliveryError exceptions
keep previous state, if reading 'fan_mode' attribute fails
* fan.zha: Use None for unknown state.
if we fail to read 'fan_mode' attribute, use None for state
* Allow create refresh_token with specific access_token_expiration
* Add token_type, client_name and client_icon
* Add unit test
* Add websocket API to create long-lived access token
* Allow URL use as client_id for long-lived access token
* Remove mutate_refresh_token method
* Use client name as id for long_lived_access_token type refresh token
* Minor change
* Do not allow duplicate client name
* Update docstring
* Remove unnecessary `list`
fixed get_camera_type as it was originally not consuming any input, was looping with all cameras and the first camera type was retutned, modified to call cameraType using provided camera name.
* Fix support for Hub version 1 (i.e. pre-2014 Hub model 2242)
* Bump insteonplm to 0.14.1
* Code review changes
* Clean up and better document set_default_port
* Simplify set_default_port based on code review
* Remove Callable type import
* Simplify port setup
* Use access_token and user provided token instead of api_password
* address comments by @awarecan
* new tests
* add extra checks and test
* lint
* add comment
* Allow create refresh_token with specific access_token_expiration
* Add token_type, client_name and client_icon
* Add unit test
* Add websocket API to create long-lived access token
* Allow URL use as client_id for long-lived access token
* Remove mutate_refresh_token method
* Use client name as id for long_lived_access_token type refresh token
* Minor change
* Do not allow duplicate client name
* Update docstring
* Remove unnecessary `list`
* Use access_token and user provided token instead of api_password
* address comments by @awarecan
* new tests
* add extra checks and test
* lint
* add comment
* Don't treat typing as an "in-between" module for import order
That was a < 3.5 era thing.
* Tighten scope of some pylint unused-import disables
To avoid isort moving a top level one around, undesirably broadening its
scope.
* Fix support for Hub version 1 (i.e. pre-2014 Hub model 2242)
* Bump insteonplm to 0.14.1
* Code review changes
* Clean up and better document set_default_port
* Simplify set_default_port based on code review
* Remove Callable type import
* Simplify port setup
fixed get_camera_type as it was originally not consuming any input, was looping with all cameras and the first camera type was retutned, modified to call cameraType using provided camera name.
* always export max_age/min_age
* downgrade errors of missing data
on start with empty recorder database these errors are logged multiple times:
ERROR (MainThread) [homeassistant.components.sensor.statistics] mean requires at least one data point
ERROR (MainThread) [homeassistant.components.sensor.statistics] variance requires at least two data points
downgrade them to debug as they are not meaningful to end users
* add change_rate attribute
this calculates the average change rate of all data points
* simplify count, reorder attribute calculation
* reorder initialization
* reorder attribute names
* don't use min/max for min_age/max_age
* add test case
* style
* style
* sort constants
* init variables with None
* add precision config setting
* round to precision
* test round
* Initial OpenTherm Gateway support.
* Fix coveragerc and requirements_all*.txt
Overall cleanup and polishing
* Make hound/flake/travis happy
* Basic improvements to comply with Home Assistant's style guidelines
Changed wording from "component" to more appropriate terms where necessary
Fixed small mistakes that snuck in during testing and/or due to my own ignorance ;)
* Fixed overwriting state property
* Fixed a bug with ROOM_SETPOINT_OVRD
Updated dependency pyotgw to latest version
* Remove unit_of_measurement from OpenThermGateway class
* Cleanup after previous commits
* Moved initialisation and configuration from async_setup_platform to async_added_to_hass
* Make travis happy
* Disable polling for this platform
Improve update flow
* Small improvements/optimisations
the two device_state_attributes don't return the current actual state (fan on/off, heat/cool), but rather the mode of the fan or thermostat (generally auto). As such this change makes the actual current state visible to the system, so you can do stuff when the fan turns on, for example. I suspect this is just a bug, but maybe it was intended NOT to be able to see the actual fan state?
* Add Smart Alarm Component
* Lint fixes
* Update coverage
* Update coverage with the correct file name
* PR Fixes. Update client version (to include timeouts). Cleaned up clien tcreation and improved authentication failure error. Added state map to replace nasty if blocks.
* PR Fixes. Update client version (to include timeouts). Cleaned up clien tcreation and improved authentication failure error. Added state map to replace nasty if blocks.
* Remove test file added in error.
* PR Fixes
* code not working
* did it all all at once
* removing debug stuff
* fixing lint issues
* fixing lint issues
* I am blind
* I felt small(80 by somthing) was to small, especily with lovelace
* fixing silly mistake
* this shouldnt be here
* made some changes
* corrrected client_id
* corrrected client_id
* less returns needed
* Fixing Small bugs and making stuff snake case
* Tweaking
* Added error handling for sense API timeouts
* Moved imports in function
* Moved imports to more appropriate function
* Change exception to custom package version
* Updated sense_energy library to 0.4.2
* fixed median was based on 1.5 minute interval, not 1 hour
* ignore median and set state from first value, when previous state was None
* update before add, removed unused 'retries' and 'ble_timeout', check if platform ready
* added missing blank line
* fixed too long line
* using modern python 3.5 features, changed comment to be less verbose
* continuation line fix
* removed DEFAULT_SCAN_INTERVAL in favor of existing SCAN_INTERVAL
* implement correct state for rflink cover
* Fix linting error
* invert logic as local testing pointed out it should be reversed
* add period at the end to satisfy the linter
* New service to load new devices from deCONZ without restarting HASS
* Do not use len to check if list is empty
* Add support for scenes to be updated as well
* Rework refresh devices method
* Fix test
* Test
* Ability to remove device
* Don't remove devices, instead remove config entry from device and entity registries
* Remove print
* Remove is not the same as unload
* Add tests
* Fix hound comment
* Add support for older Envoy models
* Stop requiring envoy model name in config
* Update to envoy_reader0.2
* Minor formatting fixes
* run script/gen_requirements_all.py
* Minor formatting fixes
* Change some strings to constants, use getattr to call function
The last_seen attribute was a datetime in the local timezone but with
no tzinfo (i.e., a "naive" datetime.) When state changes occurred it
would be printed incorrectly in homeassistant.log because
homeassistant.util.dt.as_local assumes any datetime without tzinfo is
UTC. Also most, if not all, datetime attributes are timezone aware in
UTC. So use homeassistant.util.dt.as_utc (which assumes a naive
datetime is local) to convert last_seen to a timezone aware datetime
in UTC.
A recent change caused an issue if a single static wemo device is offline and could not be reached, then the whole component would not initialize (and therefore all other wemo devices are not added).
A recent change caused an issue if a single static wemo device is offline and could not be reached, then the whole component would not initialize (and therefore all other wemo devices are not added).
* initial working version of a geo location component and georss platform
* ensure that custom attributes don't override built-in ones
* bugfixes and tests
* fixing tests because of introduction of new component using same fixture
* improving test cases
* removing potentially unavailable attribute from debug message output
* completing test suite
* cleaning up debug messages; sorting entries in group view by distance
* ability to define the desired state attribute and corresponding unit of measurement; sort devices in group by configured state; find centroid for map if event is defined by polygon; updated tests
* sort entries in group; code clean-ups
* fixing indentation
* added requirements of new component and platform
* fixed various lint issues
* fixed more lint issues
* introducing demo geo location platform; refactored geo location component and geo rss platform to fit
* removing geo rss events platform; added unit tests for geo location platform and demo platform
* reverting change in debug message for feedreader to avoid confusion with new geo location component
* updated requirements after removing georss platform
* removed unused imports
* fixing a lint issue and a test case
* simplifying component code; moving code into demo platform; fixing tests
* removed grouping from demo platform; small refactorings
* automating the entity id generation (the use of an entity namespace achieves the same thing)
* undoing changes made for the georss platform
* simplified test cases
* small tweaks to test case
* rounding all state attribute values
* fixing lint; removing distance from state attributes
* fixed test
* renamed add_devices to add_entities; tweaked test to gain more control over the timed update in the demo platform
* reusing utcnow variable instead of patched method
* fixed test by avoiding to make assumptions about order of list of entity ids
* adding test for the geo location event class
* Added support for Habitica
Second refactoring
Moved all config to component.
Sensors are autodiscovered.
Signed-off-by: delphi <cpp.create@gmail.com>
* Apply requested changes
Signed-off-by: delphi <cpp.create@gmail.com>
* Made event fire async. Made `sensors` config implicit and opt-out-style.
Signed-off-by: delphi <cpp.create@gmail.com>
* Removed unneeded check and await.
Signed-off-by: delphi <cpp.create@gmail.com>
* Moved into separate component package and added service.yaml
Signed-off-by: delphi <cpp.create@gmail.com>
* Fix coveralls
Signed-off-by: delphi <cpp.create@gmail.com>
* rewrite hangouts to use intents instead of commands
* small fixes
* remove configured_hangouts check and CONFIG_SCHEMA
* Lint
* add import from .config_flow
* Add device_tracker.bluetooth_update service
Will immediately scan for Bluetooth devices outside of the interval timer. Allows for less frequent scanning, with scanning on demand via automation.
* remove excess whitespace per bot comments
* Refactored update_bluetooth to call new function update_bluetooth_once
* Change service name to bluetooth_tracker_update to reflect platform name
* Reformat for line length
* Linting fix, pydoc, first line should end with a period
* Fixed a method call, and removed some more unsused parameters
* Added precipitation type from API
Enables users to see type of precipitation.
Value returned from API is a string in swedish.
* Corrected tox verification errors
Correction of tox findings
* Missed in tox - fixed
* Hound witespace fix
* Updated comment to trigger travis rebuild
Travis tox failed due to problem with tox build process.
Correcting in a comment to trigger retry in travis..
* Try to retrigger travis/tox successful rebuild
* Cleaning
* Cleaning more
* Trafikverket rebuilt for library
Extended pytrafikverket with weather sensor collction
Changed behaviour of sensor component to use pytrafikverket.
Added more sensors.
User need to change config to use new version.
[] Documentation needs to be updated
* Cleaned up based on Martins input
Appreciate the feedback
* Added support for velbus temperature sensors
* Bumped the required version
* updated requirements_all.txt
* Auto review comments fixed
* Updated after comments
* Updated after comments
* Fix travis
* Fix travis
* Replace pbkdf2 with bcrypt
bcrypt isn't inherently better than pbkdf2, but everything "just works"
out of the box.
* the hash verification routine now only computes one hash per call
* a per-user salt is built into the hash as opposed to the current
global salt
* bcrypt.checkpw() is immune to timing attacks regardless of input
* hash strength is a function of real time benchmarks and a
"difficulty" level, meaning we won't have to ever update the iteration
count
* WIP: add hash upgrade mechanism
* WIP: clarify decode issue
* remove stale testing code
* Fix test
* Ensure incorrect legacy passwords fail
* Add better invalid legacy password test
* Lint
* Run tests in async scope
* Inconsistent entity_id when multiple sensors
I am submitting a change to fix a [bug](https://github.com/home-assistant/home-assistant/issues/16204) for when there are several sensors for the same hostname. For example I want to track my IPv4 and IPv6 address. It creates two entities that regularly switch ids based on the order they get initialized.
To fix this I comform to the way other componnents have addressed the issue by adding an optional `name` attribute.
* Line too long
* Removing trailing whitespace
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
**Pull request in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io) with documentation (if applicable):** home-assistant/home-assistant.github.io#<home-assistant.github.ioPRnumbergoeshere>
**Pull request with documentation for [home-assistant.io](https://github.com/home-assistant/home-assistant.io) (if applicable):** home-assistant/home-assistant.io#<home-assistant.ioPRnumbergoeshere>
## Example entry for `configuration.yaml` (if applicable):
```yaml
@@ -13,18 +17,19 @@
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ]New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
- [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ]New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
- [ ][_The manifest file_][manifest-docs] has all fields filled out correctly. Update and include derived files by running `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `python3 -m script.gen_requirements_all`.
- [ ]Untested files have been added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
@@ -21,20 +21,14 @@ Featured integrations
|screenshot-components|
The system is built using a modular approach so support for other devices or actions can be implemented easily. See also the `section on architecture <https://home-assistant.io/developers/architecture/>`__ and the `section on creating your own
The system is built using a modular approach so support for other devices or actions can be implemented easily. See also the `section on architecture <https://developers.home-assistant.io/docs/en/architecture_index.html>`__ and the `section on creating your own
"verify_ssl":"AdGuard Home \u0438\u0437\u043f\u043e\u043b\u0437\u0432\u0430 \u043d\u0430\u0434\u0435\u0436\u0434\u0435\u043d \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
"existing_instance_updated":"Se actualiz\u00f3 la configuraci\u00f3n existente.",
"single_instance_allowed":"Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
},
"error":{
"connection_error":"Error al conectar."
},
"step":{
"hassio_confirm":{
"description":"\u00bfDesea configurar Home Assistant para conectarse a la p\u00e1gina principal de AdGuard proporcionada por el complemento Hass.io: {addon}?",
"title":"AdGuard Home a trav\u00e9s del complemento Hass.io"
},
"user":{
"data":{
"password":"Contrase\u00f1a",
"port":"Puerto",
"ssl":"AdGuard Home utiliza un certificado SSL",
"username":"Nombre de usuario",
"verify_ssl":"AdGuard Home utiliza un certificado adecuado"
},
"description":"Configure su instancia de AdGuard Home para permitir la supervisi\u00f3n y el control."
"existing_instance_updated":"D\u00e9i bestehend Konfiguratioun ass ge\u00e4nnert.",
"single_instance_allowed":"N\u00ebmmen eng eenzeg Konfiguratioun vun AdGuard Home ass erlaabt."
},
"error":{
"connection_error":"Feeler beim verbannen."
},
"step":{
"hassio_confirm":{
"description":"W\u00ebllt dir Home Assistant konfigur\u00e9iere fir sech mam AdGuard Home ze verbannen dee vum hass.io add-on {addon} bereet gestallt g\u00ebtt?",
"title":"AdGuard Home via Hass.io add-on"
},
"user":{
"data":{
"host":"Apparat",
"password":"Passwuert",
"port":"Port",
"ssl":"AdGuard Home benotzt een SSL Zertifikat",
"username":"Benotzernumm",
"verify_ssl":"AdGuard Home benotzt een eegenen Zertifikat"
},
"description":"Konfigur\u00e9iert \u00e4r AdGuard Home Instanz fir d'Iwwerwaachung an d'Kontroll z'erlaben.",
"ssl":"AdGuard Home \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442 SSL",
"username":"\u041b\u043e\u0433\u0438\u043d",
"verify_ssl":"AdGuard Home \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0441\u043e\u0431\u0441\u0442\u0432\u0435\u043d\u043d\u044b\u0439 \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
