Merge branch 'main' into 0_15

- LED settings update (limit to available outputs)
- minor fixes

.github/stale.yml

@@ -1,20 +0,0 @@
-# Number of days of inactivity before an issue becomes stale
-daysUntilStale: 120
-# Number of days of inactivity before a stale issue is closed
-daysUntilClose: 7
-# Issues with these labels will never be considered stale
-exemptLabels:
-  - pinned
-  - keep
-  - enhancement
-  - confirmed
-# Label to use when marking an issue as stale
-staleLabel: stale
-# Comment to post when marking an issue as stale. Set to `false` to disable
-markComment: >
-  Hey! This issue has been open for quite some time without any new comments now.
-  It will be closed automatically in a week if no further activity occurs.
-  
-  Thank you for using WLED!
-# Comment to post when closing a stale issue. Set to `false` to disable
-closeComment: false

.github/workflows/stale.yml

@@ -0,0 +1,30 @@
+name: 'Close stale issues and PRs'
+on:
+  schedule:
+    - cron: '0 12 * * *'
+  workflow_dispatch:
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v9
+        with:
+          days-before-stale: 120
+          days-before-close: 7
+          stale-issue-label: 'stale'
+          stale-pr-label: 'stale'
+          exempt-issue-labels: 'pinned,keep,enhancement,confirmed'
+          exempt-pr-labels: 'pinned,keep,enhancement,confirmed'
+          exempt-all-milestones: true
+          operations-per-run: 1000
+          stale-issue-message: >
+            Hey! This issue has been open for quite some time without any new comments now.
+            It will be closed automatically in a week if no further activity occurs.
+            
+            Thank you for using WLED! ✨
+          stale-pr-message: >
+            Hey! This pull request has been open for quite some time without any new comments now.
+            It will be closed automatically in a week if no further activity occurs.
+            
+            Thank you for contributing to WLED! ❤️

.github/workflows/wled-ci.yml

@@ -1,4 +1,4 @@
-name: PlatformIO CI
+name: WLED CI
 
 on: [push, pull_request]
 
@@ -8,17 +8,11 @@ jobs:
     name: Gather Environments
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v3
-    - name: Cache pip
-      uses: actions/cache@v3
+    - uses: actions/checkout@v4
+    - uses: actions/setup-python@v5
       with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
-    - uses: actions/setup-python@v4
-      with:
-        python-version: '3.9'
+        python-version: '3.12'
+        cache: 'pip'
     - name: Install PlatformIO
       run: pip install -r requirements.txt
     - name: Get default environments
@@ -38,54 +32,63 @@ jobs:
       matrix:
         environment: ${{ fromJSON(needs.get_default_envs.outputs.environments) }}
     steps:
-    - uses: actions/checkout@v3
-    - name: Cache pip
-      uses: actions/cache@v3
+    - uses: actions/checkout@v4
+    - name: Set up Node.js
+      uses: actions/setup-node@v4
       with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
+        cache: 'npm'
+    - run: npm ci
     - name: Cache PlatformIO
-      uses: actions/cache@v3
+      uses: actions/cache@v4
       with:
-        path: ~/.platformio
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+        path: |
+              ~/.platformio/.cache
+              ~/.buildcache
+              build_output
+        key: pio-${{ runner.os }}-${{ matrix.environment }}-${{ hashFiles('platformio.ini', 'pio-scripts/output_bins.py') }}-${{ hashFiles('wled00/**', 'usermods/**') }}
+        restore-keys: pio-${{ runner.os }}-${{ matrix.environment }}-${{ hashFiles('platformio.ini', 'pio-scripts/output_bins.py') }}-
     - name: Set up Python
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
       with:
-          python-version: '3.9'
+          python-version: '3.12'
+          cache: 'pip'
     - name: Install PlatformIO
       run: pip install -r requirements.txt
     - name: Build firmware
-      env:
-        WLED_RELEASE: True
       run: pio run -e ${{ matrix.environment }}
-    - uses: actions/upload-artifact@v2
+    - uses: actions/upload-artifact@v4
       with:
         name: firmware-${{ matrix.environment }}
         path: |
-          build_output/firmware/*.bin
-          build_output/firmware/*.gz
-    - uses: actions/upload-artifact@v2
-      if: startsWith(github.ref, 'refs/tags/')
-      with:
-        name: firmware-release
-        path: build_output/release/*.bin
+          build_output/release/*.bin
+          build_output/release/*_ESP02*.bin.gz
   release:
     name: Create Release
     runs-on: ubuntu-latest
-    needs: [get_default_envs, build]
+    needs: build
     if: startsWith(github.ref, 'refs/tags/')
     steps:
-    - uses: actions/download-artifact@v2
+    - uses: actions/download-artifact@v4
       with:
-        name: firmware-release
+        merge-multiple: true
     - name: Create draft release
       uses: softprops/action-gh-release@v1
       with:
         draft: True
         files: |
           *.bin
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          *.bin.gz
+
+
+  testCdata:
+    name: Test cdata.js
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Use Node.js
+        uses: actions/setup-node@v4
+        with:
+          node-version: '20.x'
+          cache: 'npm'
+      - run: npm ci
+      - run: npm test

.gitignore

@@ -1,21 +1,24 @@
-.pio
 .cache
+.clang-format
+.direnv
+.DS_Store
+.idea
+.pio
 .pioenvs
 .piolibdeps
 .vscode
-/wled00/Release
-/wled00/extLibs
-/platformio_override.ini
-/wled00/my_config.h
-/build_output
-.DS_Store
-.gitignore
-.clang-format
-node_modules
-.idea
-.direnv
-wled-update.sh
+
 esp01-update.sh
-/wled00/LittleFS
+platformio_override.ini
 replace_fs.py
-wled00/wled00.ino.cpp
+wled-update.sh
+
+/build_output/
+/node_modules/
+
+/wled00/extLibs
+/wled00/LittleFS
+/wled00/my_config.h
+/wled00/Release
+/wled00/wled00.ino.cpp
+/wled00/html_*.h

.vscode/tasks.json

@@ -9,8 +9,8 @@
       ],
       "dependsOrder": "sequence",
       "problemMatcher": [
-        "$platformio",
-      ],
+        "$platformio"
+      ]
     },
     {
       "type": "PlatformIO",
@@ -18,7 +18,7 @@
       "task": "Build",
       "group": {
         "kind": "build",
-        "isDefault": true,
+        "isDefault": true
       },
       "problemMatcher": [
         "$platformio"

CHANGELOG.md

@@ -1,7 +1,380 @@
 ## WLED changelog
 
-#### Build 2306180
+#### Build 2406290
+-   WLED 0.15.0-b4 release
+-   LED settings bus management update (WARNING only allow available outputs)
+-   Add ETH support for LILYGO-POE-Pro (#4030 by @rorosaurus)
+-   Update usermod_sn_photoresistor (#4017 by @xkvmoto)
+-   Several internal fixes and optimisations
+    - move LED_BUILTIN handling to BusManager class
+    - reduce max panels (web server limitation)
+    - edit WiFi TX power (ESP32)
+    - keep current ledmap ID in UI
+    - limit outputs in UI based on length
+    - wifi.ap addition to JSON Info (JSON API)
+    - relay pin init bugfix
+    - file editor button in UI
+    - ESP8266: update was restarting device on some occasions
+    - a bit of throttling in UI (for ESP8266)
 
+#### Build 2406120
+-   Update NeoPixelBus to v2.8.0
+-   Increased LED outputs one ESP32 using parallel I2S (up to 17)
+    - use single/mono I2S + 4x RMT for 5 outputs or less
+    - use parallel x8 I2S + 8x RMT for >5 outputs (limit of 300 LEDs per output)
+-   Fixed code of Smartnest and updated documentation (#4001 by @DevilPro1)
+-   ESP32-S3 WiFi fix (#4010 by @cstruck)
+-   TetrisAI usermod fix (#3897 by @muebau)
+-   ESP-NOW usermod hook
+-   Update wled.h regarding OTA Password (#3993 by @gsieben)
+-   Usermod BME68X Sensor Implementation (#3994 by @gsieben)
+-   Add a usermod for AHT10, AHT15 and AHT20 temperature/humidity sensors (#3977 by @LordMike)
+-   Update Battery usermod documentation (#3968 by @adamsthws)
+-   Add INA226 usermod for reading current and power over i2c (#3986 by @LordMike)
+-   Bugfixes: #3991
+-   Several internal fixes and optimisations (WARNING: some effects may be broken that rely on overflow/narrow width)
+    - replace uint8_t and uint16_t with unsigned
+    - replace in8_t and int16_t with int
+    - reduces code by 1kB
+
+#### Build 2405180
+-   WLED 0.14.4 release
+-   Fix for #3978
+-   Official 0.15.0-b3 release
+-   Merge 0.14.3 fixes into 0_15
+-   Added Pinwheel Expand 1D->2D effect mapping mode (#3961 by @Brandon502)
+-   Add changeable i2c address to BME280 usermod (#3966 by @LordMike)
+-   Effect: Firenoise - add palette selection
+-   Experimental parallel I2S support for ESP32 (compile time option)
+    - increased outputs to 17
+    - increased max possible color order overrides
+    - use WLED_USE_PARALLEL_I2S during compile
+    WARNING: Do not set up more than 256 LEDs per output when using parallel I2S with NeoPixelBus less than 2.9.0
+-   Update Usermod: Battery (#3964 by @adamsthws)
+-   Update Usermod: BME280 (#3965 by @LordMike)
+-   TM1914 chip support (#3913)
+-   Ignore brightness in Peek
+-   Antialiased line & circle drawing functions
+-   Enabled some audioreactive effects for single pixel strips/segments (#3942 by @gaaat98)
+-   Usermod Battery: Added Support for different battery types, Optimized file structure (#3003 by @itCarl)
+-   Skip playlist entry API (#3946 by @freakintoddles2)
+-   various optimisations and bugfixes (#3987, #3978)
+
+#### Build 2405030
+-   Using brightness in analog clock overlay (#3944 by @paspiz85)
+-   Add Webpage shortcuts (#3945 by @w00000dy)
+-   ArtNet Poll reply (#3892 by @askask)
+-   Improved brightness change via long button presses (#3933 by @gaaat98)
+-   Relay open drain output (#3920 by @Suxsem)
+-   NEW JSON API: release info (update page, `info.release`)
+-   update esp32 platform to arduino-esp32 v2.0.9 (#3902)
+-   various optimisations and bugfixes (#3952, #3922, #3878, #3926, #3919, #3904 @DedeHai)
+
+#### Build 2404120
+-   v0.15.0-b3
+-   fix for #3896 & WS2815 current saving
+-   conditional compile for AA setPixelColor()
+
+#### Build 2404100
+-   Internals: #3859, #3862, #3873, #3875
+-   Prefer I2S1 over RMT on ESP32
+-   usermod for Adafruit MAX17048 (#3667 by @ccruz09)
+-   Runtime detection of ESP32 PICO, general PSRAM support
+-   Extend JSON API "info" object
+    - add "clock" - CPU clock in MHz
+    - add "flash" - flash size in MB
+-   Fix for #3879
+-   Analog PWM fix for ESP8266 (#3887 by @gaaat98)
+-   Fix for #3870 (#3880 by @DedeHai)
+-   ESP32 S3/S2 touch fix (#3798 by @DedeHai)
+-   PIO env. PSRAM fix for S3 & S3 with 4M flash
+    - audioreactive always included for S3 & S2
+-   Fix for #3889
+-   BREAKING: Effect: modified KITT (Scanner) (#3763)
+
+#### Build 2404040
+-   WLED 0.14.3 release
+-   Fix for transition 0 (#3854, #3832, #3720)
+-   Fix for #3855 via #3873 (by @willmmiles)
+
+#### Build 2403280
+-   Individual color channel control for JSON API (fixes #3860)
+    - "col":[int|string|object|array, int|string|object|array, int|string|object|array]
+        int = Kelvin temperature or 0 for black
+        string = hex representation of [WW]RRGGBB
+        object = individual channel control {"r":0,"g":127,"b":255,"w":255}, each being optional (valid to send {})
+        array = direct channel values [r,g,b,w] (w element being optional)
+-   runtime selection for CCT IC (Athom 15W bulb)
+-   #3850 (by @w00000dy)
+-   Rotary encoder palette count bugfix
+-   bugfixes and optimisations
+
+#### Build 2403240
+-   v0.15.0-b2
+-   WS2805 support (RGB + WW + CW, 600kbps)
+-   Unified PSRAM use
+-   NeoPixelBus v2.7.9
+-   Ubiquitous PSRAM mode for all variants of ESP32
+-   SSD1309_64 I2C Support for FLD Usermod (#3836 by @THATDONFC)
+-   Palette cycling fix (add support for `{"seg":[{"pal":"X~Y~"}]}` or `{"seg":[{"pal":"X~Yr"}]}`)
+-   FW1906 Support (#3810 by @deece and @Robert-github-com)
+-   ESPAsyncWebServer 2.2.0 (#3828 by @willmmiles)
+-   Bugfixes: #3843, #3844
+
+#### Build 2403190
+-   limit max PWM frequency (fix incorrect PWM resolution)
+-   Segment UI bugfix
+-   Updated AsyncWebServer (by @wlillmmiles)
+-   Simpler boot preset (fix for #3806)
+-   Effect: Fix for 2D Drift animation (#3816 by @BaptisteHudyma)
+-   Effect: Add twin option to 2D Drift
+-   MQTT cleanup
+-   DDP: Support sources that don't push (#3833 by @willmmiles)
+-   Usermod: Tetris AI usermod (#3711 by @muebau)
+
+#### Build 2403171
+-   merge 0.14.2 changes into 0.15
+
+#### Build 2403070
+-   Add additional segment options when controlling over e1.31 (#3616 by @demophoon)
+-   LockedJsonResponse: Release early if possible (#3760 by @willmmiles)
+-   Update setup-node and cache usermods in wled-ci.yml (#3737 by @WoodyLetsCode)
+-   Fix preset sorting (#3790 by @WoodyLetsCode)
+-   compile time button configuration #3792
+-   remove IR config if not compiled
+-   additional string optimisations
+-   Better low brightness level PWM handling (fixes #2767, #2868)
+
+#### Build 2402290
+-   Multiple analog button fix for #3549
+-   Preset caching on chips with PSRAM (credit @akaricchi)
+-   Fixing stairway usermod and adding buildflags (by @lost-hope)
+-   ESP-NOW packet modification
+-   JSON buffer lock error messages / Reduce wait time for lock to 100ms
+-   Reduce string RAM usage for ESP8266
+-   Fixing a potential array bounds violation in ESPDMX
+-   Move timezone table to PROGMEM (#3766 by @willmmiles)
+-   Reposition upload warning message. (fixes #3778)
+-   ABL display fix & optimisation
+-   Add virtual Art-Net RGBW option (#3783 by @shammy642)
+
+#### Build 2402090
+-   Added new Ethernet controller RGB2Go Tetra (duplicate of ESP3DEUXQuattro)
+-   Usermod: httpPullLightControl (#3560 by @roelbroersma)
+-   DMX: S2 & C3 support via modified ESPDMX
+-   Bugfix: prevent cleaning of JSON buffer after a failed lock attempt (BufferGuard)
+-   Product/Brand override (API & AP SSID) (#3750 by @moustachauve)
+
+#### Build 2402060
+-   WLED version 0.15.0-b1
+-   Harmonic Random Cycle palette (#3729 by @dedehai)
+-   Multi PIR sensor usermod (added support for attaching multiple PIR sensors)
+-   Removed obsolete (and nonfunctional) usermods
+
+#### Build 2309120 till build 2402010
+-   WLED version 0.15.0-a0
+-   Multi-WiFi support. Add up to 3 (or more via cusom compile) WiFis to connect to (with help from @JPZV)
+-   Temporary AP. Use your WLED in public with temporary AP.
+-   Github CI build system enhancements (#3718 by @WoodyLetsCode)
+-   Accessibility: Node list ( #3715 by @WoodyLetsCode)
+-   Analog clock overlay enhancement (#3489 by @WoodyLetsCode)
+-   ESP32-POE-WROVER from Olimex ethernet support (#3625 by @m-wachter)
+-   APA106 support (#3580 by @itstefanjanos)
+-   BREAKING: Effect: updated Palette effect to support 2D (#3683 by @TripleWhy)
+-   "SuperSync" from WLED MM (by @MoonModules)
+-   Effect: DNA Spiral Effect Speed Fix (#3723 by @Derek4aty1)
+-   Fix for #3693
+-   Orange flash fix (#3196) for transitions
+-   Add own background image upload (#3596 by @WoodyLetsCode)
+-   WLED time overrides (`WLED_NTP_ENABLED`, `WLED_TIMEZONE`, `WLED_UTC_OFFSET`, `WLED_LAT` and `WLED_LON`)
+-   Better sorting and naming of static palettes (by @WoodyLetsCode)
+-   ANIMartRIX usermod and effects (#3673 by @netmindz)
+-   Use canvas instead of CSS gradient for liveview (#3621 by @zanhecht)
+-   Fix for #3672
+-   ColoOrderMap W channel swap (color order overrides now have W swap)
+-   En-/disable LED maps when receiving realtime data (#3554 by @ezcGman)
+-   Added PWM frequency selection to UI (Settings)
+-   Automatically build UI before compiling (#3598, #3666 by @WoodyLetsCode)
+-   Internal: Added *suspend* API to `strip` (`WS2812FX class`)
+-   Possible fix for #3589 & partial fix for #3605
+-   MPU6050 upgrade (#3654 by @willmmiles)
+-   UI internals (#3656 by @WoodyLetsCode)
+-   ColorPicker fix (#3658 by @WoodyLetsCode)
+-   Global JSON buffer guarding (#3648 by @willmmiles, resolves #3641, #3312, #3367, #3637, #3646, #3447)
+-   Effect: Fireworks 1D (fix for matrix trailing strip)
+-   BREAKING: Reduced number of segments (12) on ESP8266 due to less available RAM
+-   Increased available effect data buffer (increases more if board has PSRAM)
+-   Custom palette editor mobile UI enhancement (by @imeszaros)
+-   Per port Auto Brightness Limiter (ABL)
+-   Use PSRAM for JSON buffer (double size, larger ledmaps, up to 2k)
+-   Reduced heap fragmentation by allocating ledmap array only once and not deallocating effect buffer
+-   HTTP retries on failed UI load
+-   UI Search: scroll to top (#3587 by @WoodyLetsCode)
+-   Return to inline iro.js and rangetouch.js (#3597 by @WoodyLetsCode)
+-   Better caching (#3591 by @WoodyLetsCode)
+-   Do not send 404 for missing `skin.css` (#3590 by @WoodyLetsCode)
+-   Simplified UI rework (#3511 by @WoodyLetsCode)
+-   Domoticz device ID for PIR and Temperature usermods
+-   Bugfix for UCS8904 `hasWhite()`
+-   Better search in UI (#3540 by @WoodyLetsCode)
+-   Seeding FastLED PRNG (#3552 by @TripleWhy)
+-   WIZ Smart Button support (#3547 by @micw)
+-   New button type (button switch, fix for #3537)
+-   Pixel Magic Tool update (#3483 by @ajotanc)
+-   Effect: 2D Matrix fix for gaps
+-   Bugfix #3526, #3533, #3561
+-   Spookier Halloween Eyes (#3501)
+-   Compile time options for Multi Relay usermod (#3498)
+-   Effect: Fix for Dissolve (#3502)
+-   Better reverse proxy support (nested paths)
+-   Implement global JSON API boolean toggle (i.e. instead of "var":true or "var":false -> "var":"t").
+-   Sort presets by ID
+-   Fix for #3641, #3312, #3367, #3637, #3646, #3447, #3632, #3496, #2922, #3593, #3514, #3522, #3578 (partial), #3606 (@WoodyLetsCode)
+-   Improved random bg image and added random bg image options (@WoodyLetsCode, #3481)
+-   Audio palettes (Audioreactive usermod, credit @netmindz)
+-   Better UI tooltips (@ajotnac, #3464)
+-   Better effect filters (filter dropdown)
+-   UDP sync fix (for #3487)
+-   Power button override (solves #3431)
+-   Additional HTTP request throttling (ESP8266)
+-   Additional UI/UX improvements
+-   Segment class optimisations (internal)
+-   ESP-NOW sync
+-   ESP-NOW Wiz remote JSON overrides (similar to IR JSON) & bugfixes
+-   Gamma correction for custom palettes (#3399).
+-   Restore presets from browser local storage
+-   Optional effect blending
+-   Restructured UDP Sync (internal)
+    -   Remove sync receive
+    -   Sync clarification
+-   Disallow 2D effects on non-2D segments
+-   Return of 2 audio simulations
+-   Bugfix in sync #3344 (internal)
+    -   remove excessive segments
+    -   ignore inactive segments if not syncing bounds
+    -   send UDP/WS on segment change
+    -   pop_back() when removing last segment
+
+#### Build 2403170
+-   WLED 0.14.2 release
+
+#### Build 2403110
+-   Beta WLED 0.14.2-b2
+-   New AsyncWebServer (improved performance and reduced memory use)
+-   New builds for ESP8266 with 160MHz CPU clock
+-   Fixing stairway usermod and adding buildflags (#3758 by @lost-hope)
+-   Fixing a potential array bounds violation in ESPDMX
+-   Reduced RAM usage (moved strings and TZ data (by @willmmiles) to PROGMEM)
+-   LockedJsonResponse: Release early if possible (by @willmmiles)
+
+#### Build 2402120
+-   Beta WLED 0.14.2-b1
+-   Possible fix for #3589 & partial fix for #3605
+-   Prevent JSON buffer clear after failed lock attempt
+-   Multiple analog button fix for #3549
+-   UM Audioreactive: add two compiler options (#3732 by @wled-install)
+-   Fix for #3693
+
+#### Build 2401141
+-   Official release of WLED 0.14.1
+-   Fix for #3566, #3665, #3672
+-   Sorting of palettes in custom palette editor (#3674 by @WoodyLetsCode)
+
+#### Build 2401060
+-   Version bump: 0.14.1-b3
+-   Global JSON buffer guarding (#3648 by @willmmiles, resolves #3641, #3312, #3367, #3637, #3646, #3447)
+-   Fix for #3632
+-   Custom palette editor mobile UI enhancement (#3617 by @imeszaros)
+-   changelog update
+
+#### Build 2312290
+-   Fix for #3622, #3613, #3609
+-   Various tweaks and fixes
+-   changelog update
+
+#### Build 2312230
+-   Version bump: 0.14.1-b2
+-   Fix for Pixel Magic button
+-   Fix for #2922 (option to force WiFi PHY mode to G on ESP8266)
+-   Fix for #3601, #3400 (incorrect sunrise/sunset, #3612 by @softhack007)
+
+#### Build 2312180
+-   Bugfixes (#3593, #3490, #3573, #3517, #3561, #3555, #3541, #3536, #3515, #3522, #3533, #3508)
+-   Various other internal cleanups and optimisations
+
+#### Build 2311160
+-   Version bump: 0.14.1-b1
+-   Bugfixes (#3526, #3502, #3496, #3484, #3487, #3445, #3466, #3296, #3382, #3312)
+-   New feature: Sort presets by ID
+-   New usermod: LDR sensor (#3490 by @JeffWDH)
+-   Effect: Twinklefox & Tinklecat metadata fix
+-   Effect: separate #HH and #MM for Scrolling Text (#3480)
+-   SSDR usermod enhancements (#3368)
+-   PWM fan usermod enhancements (#3414)
+
+#### Build 2310010, build 2310130
+-   Release of WLED version 0.14.0 "Hoshi"
+-   Bugfixes for #3400, #3403, #3405
+-   minor HTML optimizations
+-   audioreactive: bugfix for UDP sound sync (partly initialized packets)
+
+#### Build 2309240
+-   Release of WLED beta version 0.14.0-b6 "Hoshi"
+-   Effect bugfixes and improvements (Meteor, Meteor Smooth, Scrolling Text)
+-   audioreactive: bugfixes for ES8388 and ES7243 init; minor improvements for analog inputs
+
+#### Build 2309100
+-   Release of WLED beta version 0.14.0-b5 "Hoshi"
+-   New standard esp32 build with audioreactive
+-   Effect blending bugfixes, and minor optimizations
+
+#### Build 2309050
+-   Effect blending (#3311) (finally effect transitions!)
+    *WARNING*: May not work well with ESP8266, with plenty of segments or usermods (low RAM condition)!!!
+-   Added receive and send sync groups to JSON API (#3317) (you can change sync groups using preset)
+-   Internal temperature usermod (#3246)
+-   MQTT server and topic length overrides (#3354) (new build flags)
+-   Animated Staircase usermod enhancement (#3348) (on/off toggle/relay control)
+-   Added local time info to Info page (#3351)
+-   New effect: Rolling Balls (a.k.a. linear bounce) (#1039)
+-   Various bug fixes and enhancements.
+
+#### Build 2308110
+-   Release of WLED beta version 0.14.0-b4 "Hoshi"
+-   Reset effect data immediately upon mode change
+
+#### Build 2308030
+-   Improved random palette handling and blending
+-   Soap bugfix
+-   Fix ESP-NOW crash with AP mode Always
+
+#### Build 2307180
+-   Bus-level global buffering (#3280)
+-   Removed per-segment LED buffer (SEGMENT.leds)
+-   various fixes and improvements (ESP variants platform 5.3.0, effect optimizations, /json/cfg pin allocation)
+
+#### Build 2307130
+-   larger `oappend()` stack buffer (3.5k) for ESP32
+-   Preset cycle bugfix (#3262)
+-   Rotary encoder ALT fix for large LED count (#3276)
+-   effect updates (2D Plasmaball), `blur()` speedup
+-   On/Off toggle from nodes view (may show unknown device type on older versions) (#3291)
+-   various fixes and improvements (ABL, crashes when changing presets with different segments)
+
+#### Build 2306270
+-   ESP-NOW remote support (#3237)
+-   Pixel Magic tool (display pixel art) (#3249)
+-   Websocket (peek) fallback when connection cannot be established, WS retries (#3267)
+-   Add WiFi network scan RPC command to Improv Serial (#3271)
+-   Longer (custom option available) segment name for ESP32
+-   various fixes and improvements
+
+#### Build 2306210
+-   0.14.0-b3 release
+-   respect global I2C in all usermods (no local initialization of I2C bus)
+-   Multi relay usermod compile-time enabled option (-D MULTI_RELAY_ENABLED=true|false)
+
+#### Build 2306180
 -   Added client-side option for applying effect defaults from metadata
 -   Improved ESP8266 stability by reducing WebSocket response resends
 -   Updated ESP8266 core to 3.1.2
@@ -24,7 +397,7 @@
 
 #### Build 2306020
 -   Support for segment sets (PR #3171)
--   Reduce sound simulation modes to 2 to facilitiate segment sets
+-   Reduce sound simulation modes to 2 to facilitate segment sets
 -   Trigger button immediately on press if all configured presets are the same (PR #3226)
 -   Changes for allowing Alexa to change light color to White when auto-calculating from RGB (PR #3211)
 
@@ -361,7 +734,7 @@
 
 -   Added application level pong websockets reply (#2139)
 -   Use AsyncTCP 1.0.3 as it mitigates the flickering issue from 0.13.0-b2
--   Fixed transition manually updated in preset overriden by field value
+-   Fixed transition manually updated in preset overridden by field value
 
 #### Build 2108050
 
@@ -890,7 +1263,7 @@
 
 #### Build 2011040
 
--   Inversed Rain direction (fixes #1147)
+-   Inverted Rain direction (fixes #1147)
 
 #### Build 2011010
 
@@ -1101,7 +1474,7 @@
 
 -   Added module info page to web UI
 -   Added realtime override functionality to web UI
--   Added individial segment power and brightness to web UI
+-   Added individual segment power and brightness to web UI
 -   Added feature to one-click select single segment only by tapping segment name
 -   Removed palette jumping to default if color is changed
 

CONTRIBUTING.md

@@ -2,6 +2,20 @@
 
 Here are a few suggestions to make it easier for you to contribute!
 
+### Describe your PR
+
+Please add a description of your proposed code changes. It does not need to be an exhaustive essay, however a PR with no description or just a few words might not get accepted, simply because very basic information is missing.
+
+A good description helps us to review and understand your proposed changes. For example, you could say a few words about
+* what you try to achieve (new feature, fixing a bug, refactoring, security enhancements, etc.)
+* how your code works (short technical summary - focus on important aspects that might not be obvious when reading the code)
+* testing you performed, known limitations, open ends you possibly could not solve.
+* any areas where you like to get help from an experienced maintainer (yes WLED has become big 😉)
+
+### Target branch for pull requests
+
+Please make all PRs against the `0_15` branch.
+
 ### Code style
 
 When in doubt, it is easiest to replicate the code style you find in the files you want to edit :)
@@ -14,7 +28,7 @@ You are all set if you have enabled `Editor: Detect Indentation` in VS Code.
 
 #### Blocks
 
-Whether the opening bracket of e.g. an `if` block is in the same line as the condition or in a separate line is up to your discretion. If there is only one statement, leaving out block braches is acceptable.
+Whether the opening bracket of e.g. an `if` block is in the same line as the condition or in a separate line is up to your discretion. If there is only one statement, leaving out block brackets is acceptable.
 
 Good:  
 ```cpp
@@ -35,7 +49,7 @@ if (a == b) doStuff(a);
 ```
 
 There should always be a space between a keyword and its condition and between the condition and brace.  
-Within the condition, no space should be between the paranthesis and variables.  
+Within the condition, no space should be between the parenthesis and variables.  
 Spaces between variables and operators are up to the authors discretion.
 There should be no space between function names and their argument parenthesis.
 
@@ -73,6 +87,6 @@ Good:
 <!-- This is an HTML comment -->
 ```
 
-There is no set character limit for a comment within a line,
-though as a rule of thumb you should wrap your comment if it exceeds the width of your editor window.  
+There is no hard character limit for a comment within a line,
+though as a rule of thumb consider wrapping after 120 characters.
 Inline comments are OK if they describe that line only and are not exceedingly wide.

package.json

@@ -1,6 +1,6 @@
 {
   "name": "wled",
-  "version": "0.14.0-b3",
+  "version": "0.15.0-b4",
   "description": "Tools for WLED project",
   "main": "tools/cdata.js",
   "directories": {
@@ -9,6 +9,7 @@
   },
   "scripts": {
     "build": "node tools/cdata.js",
+    "test": "node --test",
     "dev": "nodemon -e js,html,htm,css,png,jpg,gif,ico,js -w tools/ -w wled00/data/ -x node tools/cdata.js"
   },
   "repository": {
@@ -22,10 +23,9 @@
   },
   "homepage": "https://github.com/Aircoookie/WLED#readme",
   "dependencies": {
-    "clean-css": "^4.2.3",
-    "html-minifier-terser": "^5.1.1",
+    "clean-css": "^5.3.3",
+    "html-minifier-terser": "^7.2.0",
     "inliner": "^1.13.1",
-    "nodemon": "^2.0.20",
-    "zlib": "^1.0.5"
+    "nodemon": "^3.0.2"
   }
 }

pio-scripts/build_ui.py

@@ -0,0 +1,3 @@
+Import('env')
+
+env.Execute("npm run build")

pio-scripts/obj-dump.py

@@ -1,9 +1,24 @@
 # Little convenience script to get an object dump
+#   You may add "-S" to the objdump commandline (i.e. replace "-D -C " with "-d -S -C ") 
+#   to get source code intermixed with disassembly (SLOW !)
 
 Import('env')
 
 def obj_dump_after_elf(source, target, env):
+    platform = env.PioPlatform()
+    board = env.BoardConfig()
+    mcu = board.get("build.mcu", "esp32")
+
     print("Create firmware.asm")
-    env.Execute("xtensa-lx106-elf-objdump "+ "-D " + str(target[0]) + " > "+ "${PROGNAME}.asm")
-    
+    if mcu == "esp8266":
+        env.Execute("xtensa-lx106-elf-objdump "+ "-D -C " + str(target[0]) + " > "+ "$BUILD_DIR/${PROGNAME}.asm")
+    if mcu == "esp32":
+        env.Execute("xtensa-esp32-elf-objdump "+ "-D -C " + str(target[0]) + " > "+ "$BUILD_DIR/${PROGNAME}.asm")
+    if mcu == "esp32s2":
+        env.Execute("xtensa-esp32s2-elf-objdump "+ "-D -C " + str(target[0]) + " > "+ "$BUILD_DIR/${PROGNAME}.asm")
+    if mcu == "esp32s3":
+        env.Execute("xtensa-esp32s3-elf-objdump "+ "-D -C " + str(target[0]) + " > "+ "$BUILD_DIR/${PROGNAME}.asm")
+    if mcu == "esp32c3":
+        env.Execute("riscv32-esp-elf-objdump "+ "-D -C " + str(target[0]) + " > "+ "$BUILD_DIR/${PROGNAME}.asm")
+
 env.AddPostAction("$BUILD_DIR/${PROGNAME}.elf", [obj_dump_after_elf])

pio-scripts/output_bins.py

@@ -4,6 +4,7 @@ import shutil
 import gzip
 
 OUTPUT_DIR = "build_output{}".format(os.path.sep)
+#OUTPUT_DIR = os.path.join("build_output")
 
 def _get_cpp_define_value(env, define):
     define_list = [item[-1] for item in env["CPPDEFINES"] if item[0] == define]
@@ -13,57 +14,52 @@ def _get_cpp_define_value(env, define):
 
     return None
 
-def _create_dirs(dirs=["firmware", "map"]):
-    # check if output directories exist and create if necessary
-    if not os.path.isdir(OUTPUT_DIR):
-        os.mkdir(OUTPUT_DIR)
-
+def _create_dirs(dirs=["map", "release", "firmware"]):
     for d in dirs:
-        if not os.path.isdir("{}{}".format(OUTPUT_DIR, d)):
-            os.mkdir("{}{}".format(OUTPUT_DIR, d))
+        os.makedirs(os.path.join(OUTPUT_DIR, d), exist_ok=True)
+
+def create_release(source):
+    release_name = _get_cpp_define_value(env, "WLED_RELEASE_NAME")
+    if release_name:
+        version = _get_cpp_define_value(env, "WLED_VERSION")
+        release_file = os.path.join(OUTPUT_DIR, "release", f"WLED_{version}_{release_name}.bin")
+        release_gz_file = release_file + ".gz"
+        print(f"Copying {source} to {release_file}")
+        shutil.copy(source, release_file)
+        bin_gzip(release_file, release_gz_file)
+    else:
+        variant = env["PIOENV"]
+        bin_file = "{}firmware{}{}.bin".format(OUTPUT_DIR, os.path.sep, variant)
+        print(f"Copying {source} to {bin_file}")
+        shutil.copy(source, bin_file)
 
 def bin_rename_copy(source, target, env):
     _create_dirs()
     variant = env["PIOENV"]
+    builddir = os.path.join(env["PROJECT_BUILD_DIR"],  variant)
+    source_map = os.path.join(builddir, env["PROGNAME"] + ".map")
 
     # create string with location and file names based on variant
     map_file = "{}map{}{}.map".format(OUTPUT_DIR, os.path.sep, variant)
-    bin_file = "{}firmware{}{}.bin".format(OUTPUT_DIR, os.path.sep, variant)
 
-    release_name = _get_cpp_define_value(env, "WLED_RELEASE_NAME")
-
-    if release_name:
-        _create_dirs(["release"])
-        version = _get_cpp_define_value(env, "WLED_VERSION")
-        release_file = "{}release{}WLED_{}_{}.bin".format(OUTPUT_DIR, os.path.sep, version, release_name)
-        shutil.copy(str(target[0]), release_file)
-
-    # check if new target files exist and remove if necessary
-    for f in [map_file, bin_file]:
-        if os.path.isfile(f):
-            os.remove(f)
-
-    # copy firmware.bin to firmware/<variant>.bin
-    shutil.copy(str(target[0]), bin_file)
+    create_release(str(target[0]))
 
     # copy firmware.map to map/<variant>.map
     if os.path.isfile("firmware.map"):
-        shutil.move("firmware.map", map_file)
+        print("Found linker mapfile firmware.map")
+        shutil.copy("firmware.map", map_file)
+    if os.path.isfile(source_map):
+        print(f"Found linker mapfile {source_map}")
+        shutil.copy(source_map, map_file)
 
-def bin_gzip(source, target, env):
-    _create_dirs()
-    variant = env["PIOENV"]
-
-    # create string with location and file names based on variant
-    bin_file = "{}firmware{}{}.bin".format(OUTPUT_DIR, os.path.sep, variant)
-    gzip_file = "{}firmware{}{}.bin.gz".format(OUTPUT_DIR, os.path.sep, variant)
-
-    # check if new target files exist and remove if necessary
-    if os.path.isfile(gzip_file): os.remove(gzip_file)
-
-    # write gzip firmware file
-    with open(bin_file,"rb") as fp:
-        with gzip.open(gzip_file, "wb", compresslevel = 9) as f:
+def bin_gzip(source, target):
+    # only create gzip for esp8266
+    if not env["PIOPLATFORM"] == "espressif8266":
+        return
+    
+    print(f"Creating gzip file {target} from {source}")
+    with open(source,"rb") as fp:
+        with gzip.open(target, "wb", compresslevel = 9) as f:
             shutil.copyfileobj(fp, f)
 
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", [bin_rename_copy, bin_gzip])
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", bin_rename_copy)

platformio.ini

@@ -9,37 +9,8 @@
 # (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
 # ------------------------------------------------------------------------------
 
-# CI binaries
-;; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
-
-# Release binaries
-; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
-
-# Build everything
-; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0_6-rev2, codm-controller-0_6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
-
-# Single binaries (uncomment your board)
-; default_envs = elekstube_ips
-; default_envs = nodemcuv2
-; default_envs = esp8266_2m
-; default_envs = esp01_1m_full
-; default_envs = esp07
-; default_envs = d1_mini
-; default_envs = heltec_wifi_kit_8
-; default_envs = h803wf
-; default_envs = d1_mini_debug
-; default_envs = d1_mini_ota
-; default_envs = esp32dev
-; default_envs = esp8285_4CH_MagicHome
-; default_envs = esp8285_H801
-; default_envs = d1_mini_5CH_Shojo_PCB
-; default_envs = wemos_shield_esp32
-; default_envs = m5atom
-; default_envs = esp32_eth
-; default_envs = esp32dev_qio80
-; default_envs = esp32_eth_ota1mapp
-; default_envs = esp32s2_saola
+# CI/release binaries
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover
 
 src_dir  = ./wled00
 data_dir = ./wled00/data
@@ -58,9 +29,9 @@ extra_configs =
 arduino_core_2_6_3 = espressif8266@2.3.3
 arduino_core_2_7_4 = espressif8266@2.6.2
 arduino_core_3_0_0 = espressif8266@3.0.0
-arduino_core_3_2_0 = espressif8266@3.2.0
-arduino_core_4_1_0 = espressif8266@4.1.0
-arduino_core_3_1_2 = espressif8266@4.2.0
+arduino_core_3_0_2 = espressif8266@3.2.0
+arduino_core_3_1_0 = espressif8266@4.1.0
+arduino_core_3_1_2 = espressif8266@4.2.1
 
 # Development platforms
 arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
@@ -70,14 +41,13 @@ arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/
 platform_wled_default = ${common.arduino_core_3_1_2}
 # We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
 #platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
-platform_packages = platformio/framework-arduinoespressif8266
-                    platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
+platform_packages = platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
                     platformio/tool-esptool #@ ~1.413.0
                     platformio/tool-esptoolpy #@ ~1.30000.0
 
 ## previous platform for 8266, in case of problems with the new one
-## you'll need  makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_2_0, which does not support Ucs890x
-;; platform_wled_default = ${common.arduino_core_3_2_0}
+## you'll need  makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_0_2, which does not support Ucs890x
+;; platform_wled_default = ${common.arduino_core_3_0_2}
 ;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
 ;;                    platformio/toolchain-xtensa @ ~2.40802.200502
 ;;                    platformio/tool-esptool @ ~1.413.0
@@ -85,11 +55,13 @@ platform_packages = platformio/framework-arduinoespressif8266
 
 # ------------------------------------------------------------------------------
 # FLAGS: DEBUG
-#
+# esp8266 : see https://docs.platformio.org/en/latest/platforms/espressif8266.html#debug-level
+# esp32   : see https://docs.platformio.org/en/latest/platforms/espressif32.html#debug-level
 # ------------------------------------------------------------------------------
-debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
-#if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
-#-DDEBUG_ESP_CORE is not working right now
+debug_flags = -D DEBUG=1 -D WLED_DEBUG
+  -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM ;; for esp8266
+  # if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
+  # -DDEBUG_ESP_CORE is not working right now
 
 # ------------------------------------------------------------------------------
 # FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
@@ -114,7 +86,6 @@ debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT
 #  This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
 # ------------------------------------------------------------------------------
 build_flags =
-  -Wno-attributes
   -DMQTT_MAX_PACKET_SIZE=1024
   -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
   -DBEARSSL_SSL_BASIC
@@ -128,18 +99,10 @@ build_flags =
   -D DECODE_SONY=true
   -D DECODE_SAMSUNG=true
   -D DECODE_LG=true
-  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
   -DWLED_USE_MY_CONFIG
-  ; -D USERMOD_SENSORSTOMQTT
-  #For ADS1115 sensor uncomment following
-  ; -D USERMOD_ADS1115
 
 build_unflags =
 
-build_flags_esp8266 = ${common.build_flags}  ${esp8266.build_flags}
-build_flags_esp32   = ${common.build_flags}  ${esp32.build_flags}
-build_flags_esp32_V4= ${common.build_flags}  ${esp32_idf_V4.build_flags}
-
 ldscript_1m128k = eagle.flash.1m128.ld
 ldscript_2m512k = eagle.flash.2m512.ld
 ldscript_2m1m = eagle.flash.2m1m.ld
@@ -151,6 +114,8 @@ extra_scripts =
   post:pio-scripts/output_bins.py
   post:pio-scripts/strip-floats.py
   pre:pio-scripts/user_config_copy.py
+  pre:pio-scripts/build_ui.py
+  ; post:pio-scripts/obj-dump.py  ;; convenience script to create a disassembly dump of the firmware (hardcore debugging)
 
 # ------------------------------------------------------------------------------
 # COMMON SETTINGS:
@@ -159,10 +124,8 @@ extra_scripts =
 framework = arduino
 board_build.flash_mode = dout
 monitor_speed = 115200
-# slow upload speed (comment this out with a ';' when building for development use)
+# slow upload speed but most compatible (use platformio_override.ini to use faster speed)
 upload_speed = 115200
-# fast upload speed (remove ';' when building for development use)
-; upload_speed = 921600
 
 # ------------------------------------------------------------------------------
 # LIBRARIES: required dependencies
@@ -173,24 +136,42 @@ upload_speed = 115200
 # ------------------------------------------------------------------------------
 lib_compat_mode = strict
 lib_deps =
-    fastled/FastLED @ 3.5.0
+    fastled/FastLED @ 3.6.0
     IRremoteESP8266 @ 2.8.2
-    makuna/NeoPixelBus @ 2.7.5
-    https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
+    makuna/NeoPixelBus @ 2.8.0
+    #https://github.com/makuna/NeoPixelBus.git#CoreShaderBeta
+    https://github.com/Aircoookie/ESPAsyncWebServer.git @ 2.2.1
+  # for I2C interface
+    ;Wire
+  # ESP-NOW library
+    ;gmag11/QuickESPNow @ ~0.7.0
+    https://github.com/blazoncek/QuickESPNow.git#optional-debug
   #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
     #TFT_eSPI
   #For compatible OLED display uncomment following
-    #U8g2 #@ ~2.33.15
+    #olikraus/U8g2 #@ ~2.33.15
   #For Dallas sensor uncomment following
-    #OneWire @ ~2.3.7
+    #paulstoffregen/OneWire @ ~2.3.8
   #For BME280 sensor uncomment following
     #BME280 @ ~3.0.0
-    ; adafruit/Adafruit BMP280 Library @ 2.1.0
-    ; adafruit/Adafruit CCS811 Library @ 1.0.4
-    ; adafruit/Adafruit Si7021 Library @ 1.4.0
+    ;adafruit/Adafruit BMP280 Library @ 2.1.0
+    ;adafruit/Adafruit CCS811 Library @ 1.0.4
+    ;adafruit/Adafruit Si7021 Library @ 1.4.0
   #For ADS1115 sensor uncomment following
-    ; adafruit/Adafruit BusIO @ 1.13.2
-    ; adafruit/Adafruit ADS1X15 @ 2.4.0
+    ;adafruit/Adafruit BusIO @ 1.13.2
+    ;adafruit/Adafruit ADS1X15 @ 2.4.0
+  #For MAX1704x Lipo Monitor / Fuel Gauge uncomment following
+    ; https://github.com/adafruit/Adafruit_BusIO @ 1.14.5
+    ; https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2
+  #For MPU6050 IMU uncomment follwoing
+    ;electroniccats/MPU6050 @1.0.1
+  # For -D USERMOD_ANIMARTRIX
+  # CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms!
+    ;https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
+  # SHT85
+    ;robtillaart/SHT85@~0.3.3
+  # Audioreactive usermod
+    ;kosme/arduinoFFT @ 2.0.1
 
 extra_scripts = ${scripts_defaults.extra_scripts}
 
@@ -199,7 +180,7 @@ build_flags =
   -DESP8266
   -DFP_IN_IROM
   ;-Wno-deprecated-declarations
-  -Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
+  ;-Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
   ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
   -Wno-misleading-indentation
   ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
@@ -212,6 +193,10 @@ build_flags =
   -DVTABLES_IN_FLASH
   ; restrict to minimal mime-types
   -DMIMETYPE_MINIMAL
+  ; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html)
+  ; decrease code cache size and increase IRAM to fit all pixel functions
+  -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
+  ; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown
 
 lib_deps =
   #https://github.com/lorol/LITTLEFS.git
@@ -222,9 +207,7 @@ lib_deps =
 [esp32]
 #platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
 platform = espressif32@3.5.0
-
 platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4
-
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   #-DCONFIG_LITTLEFS_FOR_IDF_3_2
@@ -232,14 +215,19 @@ build_flags = -g
   #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
   -D LOROL_LITTLEFS
   ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-
+tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-
+extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
+big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv     ;; 1.8MB firmware, 256KB filesystem, coredump support
+large_partitions = tools/WLED_ESP32_8MB.csv
+extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv
 lib_deps =
   https://github.com/lorol/LITTLEFS.git
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
-
+# additional build flags for audioreactive
+AR_build_flags = -D USERMOD_AUDIOREACTIVE
+AR_lib_deps = kosme/arduinoFFT @ 2.0.1
 
 [esp32_idf_V4]
 ;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
@@ -247,25 +235,21 @@ lib_deps =
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-platform = espressif32@5.2.0
-platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
   -DARDUINO_ARCH_ESP32 -DESP32
-  #-DCONFIG_LITTLEFS_FOR_IDF_3_2
   -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 lib_deps =
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 
 [esp32s2]
 ;; generic definitions for all ESP32-S2 boards
-platform = espressif32@5.2.0
-platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S2
@@ -276,16 +260,14 @@ build_flags = -g
   -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-
 lib_deps =
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 
 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = espressif32@5.2.0
-platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32C3
@@ -295,16 +277,14 @@ build_flags = -g
   -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-
 lib_deps =
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = espressif32@5.2.0
-platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
@@ -315,7 +295,6 @@ build_flags = -g
   -DCO
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
-
 lib_deps =
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
@@ -331,102 +310,81 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
 lib_deps = ${esp8266.lib_deps}
 monitor_filters = esp8266_exception_decoder
 
+[env:nodemcuv2_160]
+extends = env:nodemcuv2
+board_build.f_cpu = 160000000L
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266_160 #-DWLED_DISABLE_2D
+
 [env:esp8266_2m]
 board = esp_wroom_02
 platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02
 lib_deps = ${esp8266.lib_deps}
 
+[env:esp8266_2m_160]
+extends = env:esp8266_2m
+board_build.f_cpu = 160000000L
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02_160
+
 [env:esp01_1m_full]
 board = esp01_1m
 platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
+  ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
 lib_deps = ${esp8266.lib_deps}
 
-[env:esp07]
-board = esp07
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-
-[env:d1_mini]
-board = d1_mini
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-upload_speed = 921600
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-monitor_filters = esp8266_exception_decoder
-
-[env:heltec_wifi_kit_8]
-board = d1_mini
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-
-[env:h803wf]
-board = d1_mini
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
-lib_deps = ${esp8266.lib_deps}
+[env:esp01_1m_full_160]
+extends = env:esp01_1m_full
+board_build.f_cpu = 160000000L
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01_160 -D WLED_DISABLE_OTA
+  ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
 
 [env:esp32dev]
 board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
 lib_deps = ${esp32.lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
 
-[env:esp32dev_qio80]
-board = esp32dev
-platform = ${esp32.platform}
-platform_packages = ${esp32.platform_packages}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
-lib_deps = ${esp32.lib_deps}
-monitor_filters = esp32_exception_decoder
-board_build.partitions = ${esp32.default_partitions}
-board_build.f_flash = 80000000L
-board_build.flash_mode = qio
-
-[env:esp32dev_V4_dio80]
-;; experimental ESP32 env using ESP-IDF V4.4.x
-;; Warning: this build environment is not stable!!
-;; please erase your device before installing.
+[env:esp32dev_8M]
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
 platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_8M #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
-board_build.partitions = ${esp32_idf_V4.default_partitions}
-board_build.f_flash = 80000000L
-board_build.flash_mode = dio
+board_build.partitions = ${esp32.large_partitions}
+; board_build.f_flash = 80000000L
+
+[env:esp32dev_audioreactive]
+board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32.lib_deps}
+  ${esp32.AR_lib_deps}
+monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32.default_partitions}
+; board_build.f_flash = 80000000L
+; board_build.flash_mode = dio
 
 [env:esp32_eth]
 board = esp32-poe
@@ -434,22 +392,26 @@ platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
+  -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
 lib_deps = ${esp32.lib_deps}
 board_build.partitions = ${esp32.default_partitions}
 
-[env:esp32s2_saola]
-board = esp32-s2-saola-1
-platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
-platform_packages =
-framework = arduino
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+[env:esp32_wrover]
+extends = esp32_idf_V4
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
+board = ttgo-t7-v14-mini32
+board_build.f_flash = 80000000L
 board_build.flash_mode = qio
-upload_speed = 460800
+board_build.partitions = ${esp32.default_partitions}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
-  -DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps = ${esp32s2.lib_deps}
+build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_WROVER
+  -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
+  -D LEDPIN=25
+  ; ${esp32.AR_build_flags}
+lib_deps = ${esp32_idf_V4.lib_deps}
+  ; ${esp32.AR_lib_deps}
 
 [env:esp32c3dev]
 extends = esp32c3
@@ -457,325 +419,101 @@ platform = ${esp32c3.platform}
 platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
+board_build.partitions = ${esp32.default_partitions}
+build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3
   -D WLED_WATCHDOG_TIMEOUT=0
-  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
-  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
+  -DLOLIN_WIFI_FIX ; seems to work much better with this
+  -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
+  ;-DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 lib_deps = ${esp32c3.lib_deps}
 
-[env:esp32s3dev_8MB]
-;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
-board = esp32-s3-devkitc-1
-platform = ${esp32s3.platform}
-platform_packages = ${esp32s3.platform_packages}
-upload_speed = 921600 ; or  460800
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags}
-  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  ;-D WLED_DEBUG
-lib_deps = ${esp32s3.lib_deps}
-board_build.partitions = tools/WLED_ESP32_8MB.csv
-board_build.f_flash = 80000000L
-board_build.flash_mode = qio
-; board_build.flash_mode = dio   ;; try this if you have problems at startup
-monitor_filters = esp32_exception_decoder
-
-[env:esp32s3dev_8MB_PSRAM]
-;; ESP32-TinyS3 development board, with 8MB FLASH and 8MB PSRAM (memory_type: qio_opi, qio_qspi, or opi_opi)
-;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
-;board = esp32s3box   ; -> error: 'esp32_adc2gpio' was not declared in this scope
-board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
+[env:esp32s3dev_16MB_opi]
+;; ESP32-S3 development board, with 16MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
 platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags}
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_16MB_opi
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  -D ARDUINO_USB_CDC_ON_BOOT=1  ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
-  -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
+  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
-board_build.partitions = tools/WLED_ESP32_8MB.csv
+  ${esp32.AR_lib_deps}
+board_build.partitions = ${esp32.extreme_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder
 
-[env:esp8285_4CH_MagicHome]
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_1m128k}
+[env:esp32s3dev_8MB_opi]
+;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
+platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
+upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
-lib_deps = ${esp8266.lib_deps}
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB_opi
+  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
+  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
+board_build.partitions = ${esp32.large_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+monitor_filters = esp32_exception_decoder
 
-[env:esp8285_H801]
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_1m128k}
+[env:esp32s3_4M_qspi]
+;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
+board = lolin_s3_mini ;; -S3 mini, 4MB flash 2MB PSRAM 
+platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
+upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
-lib_deps = ${esp8266.lib_deps}
-
-[env:d1_mini_5CH_Shojo_PCB]
-board = d1_mini
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
-lib_deps = ${esp8266.lib_deps}
-
-# ------------------------------------------------------------------------------
-# DEVELOPMENT BOARDS
-# ------------------------------------------------------------------------------
-
-[env:d1_mini_debug]
-board = d1_mini
-build_type = debug
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
-lib_deps = ${esp8266.lib_deps}
-
-[env:d1_mini_ota]
-board = d1_mini
-upload_protocol = espota
-# exchange for your WLED IP
-upload_port = "10.10.1.27"
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-
-[env:anavi_miracle_controller]
-board = d1_mini
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
-lib_deps = ${esp8266.lib_deps}
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_qspi
+  -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  -DBOARD_HAS_PSRAM
+  -DLOLIN_WIFI_FIX ; seems to work much better with this
+  -D WLED_WATCHDOG_TIMEOUT=0
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
+board_build.partitions = ${esp32.default_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+monitor_filters = esp32_exception_decoder
 
 [env:lolin_s2_mini]
 platform = ${esp32s2.platform}
 platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-build_unflags = ${common.build_unflags} -DARDUINO_USB_CDC_ON_BOOT=1
-build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=LolinS2
-  -DBOARD_HAS_PSRAM
-  -DARDUINO_USB_CDC_ON_BOOT=0
+board_build.partitions = ${esp32.default_partitions}
+board_build.flash_mode = qio
+board_build.f_flash = 80000000L
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2
+  -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MSC_ON_BOOT=0
   -DARDUINO_USB_DFU_ON_BOOT=0
+  -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
-  -D WLED_USE_PSRAM
   -D WLED_WATCHDOG_TIMEOUT=0
   -D CONFIG_ASYNC_TCP_USE_WDT=0
   -D LEDPIN=16
-  -D BTNPIN=18
-  -D RLYPIN=9
-  -D IRPIN=7
   -D HW_PIN_SCL=35
   -D HW_PIN_SDA=33
   -D HW_PIN_CLOCKSPI=7
   -D HW_PIN_DATASPI=11
   -D HW_PIN_MISOSPI=9
 ;  -D STATUSLED=15
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s2.lib_deps}
-
-# ------------------------------------------------------------------------------
-# custom board configurations
-# ------------------------------------------------------------------------------
-
-[env:esp32c3dev_2MB]
-;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
-;; this board need a specific partition file. OTA not possible.
-extends = esp32c3
-platform = ${esp32c3.platform}
-platform_packages = ${esp32c3.platform_packages}
-board = esp32-c3-devkitm-1
-build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
-  -D WLED_WATCHDOG_TIMEOUT=0
-  -D WLED_DISABLE_OTA
-  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
-  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
-build_unflags = ${common.build_unflags}
-upload_speed = 115200
-lib_deps = ${esp32c3.lib_deps}
-board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
-board_build.flash_mode = dio
-
-[env:wemos_shield_esp32]
-board = esp32dev
-platform = ${esp32.platform}
-platform_packages = ${esp32.platform_packages}
-upload_speed = 460800
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32}
-  -D LEDPIN=16
-  -D RLYPIN=19
-  -D BTNPIN=17
-  -D IRPIN=18
-  -D UWLED_USE_MY_CONFIG
-  -D USERMOD_DALLASTEMPERATURE
-  -D USERMOD_FOUR_LINE_DISPLAY
-  -D TEMPERATURE_PIN=23
-  -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
-  -D USERMOD_AUDIOREACTIVE
-lib_deps = ${esp32.lib_deps}
-  OneWire@~2.3.5
-  olikraus/U8g2 @ ^2.28.8
-  https://github.com/blazoncek/arduinoFFT.git
-board_build.partitions = ${esp32.default_partitions}
-
-[env:m5atom]
-board = esp32dev
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
-lib_deps = ${esp32.lib_deps}
-platform = ${esp32.platform}
-platform_packages = ${esp32.platform_packages}
-board_build.partitions = ${esp32.default_partitions}
-
-[env:sp501e]
-board = esp_wroom_02
-platform = ${common.platform_wled_default}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
-lib_deps = ${esp8266.lib_deps}
-
-[env:sp511e]
-board = esp_wroom_02
-platform = ${common.platform_wled_default}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
-lib_deps = ${esp8266.lib_deps}
-
-[env:Athom_RGBCW]        ;7w and 5w(GU10) bulbs
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
-                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
-lib_deps = ${esp8266.lib_deps}
-
-
-[env:Athom_15w_RGBCW]        ;15w bulb
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
-                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
-lib_deps = ${esp8266.lib_deps}
-
-
-[env:Athom_3Pin_Controller]        ;small controller with only data
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
-lib_deps = ${esp8266.lib_deps}
-
-
-[env:Athom_4Pin_Controller]       ; With clock and data interface
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
-lib_deps = ${esp8266.lib_deps}
-
-
-[env:Athom_5Pin_Controller]      ;Analog light strip controller
-board = esp8285
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
-lib_deps = ${esp8266.lib_deps}
-
-
-[env:MY9291]
-board = esp01_1m
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_1m128k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
-lib_deps = ${esp8266.lib_deps}
-
-# ------------------------------------------------------------------------------
-# codm pixel controller board configurations
-# codm-controller-0_6 can also be used for the TYWE3S controller
-# ------------------------------------------------------------------------------
-
-[env:codm-controller-0_6]
-board = esp_wroom_02
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_2m512k}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-
-[env:codm-controller-0_6-rev2]
-board = esp_wroom_02
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_4m1m}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-lib_deps = ${esp8266.lib_deps}
-
-# ------------------------------------------------------------------------------
-# EleksTube-IPS
-# ------------------------------------------------------------------------------
-[env:elekstube_ips]
-board = esp32dev
-platform = ${esp32.platform}
-platform_packages = ${esp32.platform_packages}
-upload_speed = 921600
-build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
-  -D USERMOD_RTC
-  -D USERMOD_ELEKSTUBE_IPS
-  -D LEDPIN=12
-  -D RLYPIN=27
-  -D BTNPIN=34
-  -D DEFAULT_LED_COUNT=6
-  # Display config
-  -D ST7789_DRIVER
-  -D TFT_WIDTH=135
-  -D TFT_HEIGHT=240
-  -D CGRAM_OFFSET
-  -D TFT_SDA_READ
-  -D TFT_MOSI=23
-  -D TFT_SCLK=18
-  -D TFT_DC=25
-  -D TFT_RST=26
-  -D SPI_FREQUENCY=40000000
-  -D USER_SETUP_LOADED
-monitor_filters = esp32_exception_decoder
-lib_deps =
-  ${esp32.lib_deps}
-  TFT_eSPI @ ^2.3.70
-board_build.partitions = ${esp32.default_partitions}
+  ${esp32.AR_lib_deps}

platformio_override.ini.sample

@@ -1,65 +0,0 @@
-# Example PlatformIO Project Configuration Override
-# ------------------------------------------------------------------------------
-# Copy to platformio_override.ini to activate overrides
-# ------------------------------------------------------------------------------
-# Please visit documentation: https://docs.platformio.org/page/projectconf.html
-
-[platformio]
-default_envs = WLED_tasmota_1M
-
-[env:WLED_tasmota_1M]
-board = esp01_1m
-platform = ${common.platform_wled_default}
-platform_packages = ${common.platform_packages}
-board_build.ldscript = ${common.ldscript_1m128k}
-lib_deps = ${esp8266.lib_deps}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
-; *********************************************************************
-; *** Use custom settings from file my_config.h
-   -DWLED_USE_MY_CONFIG
-; *********************************************************************
-;
-;
-; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
-; 
-; disable specific features
-;  -D WLED_DISABLE_OTA
-;  -D WLED_DISABLE_ALEXA
-;  -D WLED_DISABLE_HUESYNC
-;  -D WLED_DISABLE_INFRARED
-;  -D WLED_DISABLE_WEBSOCKETS
-; PIN defines - uncomment and change, if needed:
-;   -D LEDPIN=2
-;   -D BTNPIN=0
-;   -D TOUCHPIN=T0
-;   -D IRPIN=4
-;   -D RLYPIN=12
-;   -D RLYMDE=1
-; digital LED strip types - uncomment only one ! - this will disable WS281x / SK681x support
-;   -D USE_APA102
-;   -D USE_WS2801
-;   -D USE_LPD8806
-; PIN defines for 2 wire LEDs
-   -D CLKPIN=0
-   -D DATAPIN=2
-; to drive analog LED strips (aka 5050) hardware configuration is no longer necessary
-; configure the settings in the UI as follows (hard):
-;   for the Magic Home LED Controller use PWM pins 5,12,13,15
-;   for the H801 controller use PINs 15,13,12,14 (W2 = 04)
-;   for the BW-LT11 controller use PINs 12,4,14,5
-;   
-; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
-;   -D SERVERNAME="\"WLED\""
-;   
-; set the number of LEDs
-;   -D DEFAULT_LED_COUNT=30
-;   
-; set milliampere limit when using ESP pin to power leds
-;   -D ABL_MILLIAMPS_DEFAULT=850
-;
-; enable IR by setting remote type
-;   -D IRTYPE=0 ;0 Remote disabled | 1 24-key RGB | 2 24-key with CT | 3 40-key blue | 4 40-key RGB | 5 21-key RGB | 6 6-key black | 7 9-key red | 8 JSON remote
-;   
-; set default color order of your led strip
-;   -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB

platformio_override.sample.ini

@@ -0,0 +1,515 @@
+# Example PlatformIO Project Configuration Override
+# ------------------------------------------------------------------------------
+# Copy to platformio_override.ini to activate overrides
+# ------------------------------------------------------------------------------
+# Please visit documentation: https://docs.platformio.org/page/projectconf.html
+
+[platformio]
+default_envs = WLED_tasmota_1M  # define as many as you need
+
+#----------
+# SAMPLE
+#----------
+[env:WLED_generic8266_1M]
+extends = env:esp01_1m_full  # when you want to extend the existing environment (define only updated options)
+; board = esp01_1m  # uncomment when ou need different board
+; platform = ${common.platform_wled_default}  # uncomment and change when you want particular platform
+; platform_packages = ${common.platform_packages}
+; board_build.ldscript = ${common.ldscript_1m128k}
+; upload_speed = 921600 # fast upload speed (remove ';' if your board supports fast upload speed)
+# Sample libraries used for various usermods. Uncomment when using particular usermod.
+lib_deps = ${esp8266.lib_deps}
+;  olikraus/U8g2 # @~2.33.15
+;  paulstoffregen/OneWire@~2.3.8
+;  adafruit/Adafruit Unified Sensor@^1.1.4
+;  adafruit/DHT sensor library@^1.4.1
+;  adafruit/Adafruit BME280 Library@^2.2.2
+;  Wire
+;  robtillaart/SHT85@~0.3.3
+;  ;gmag11/QuickESPNow @ ~0.7.0 # will also load QuickDebug
+;  https://github.com/blazoncek/QuickESPNow.git#optional-debug  ;; exludes debug library
+;  ${esp32.AR_lib_deps} ;; used for USERMOD_AUDIOREACTIVE
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+;
+; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
+; 
+; Set a release name that may be used to distinguish required binary for flashing
+;   -D WLED_RELEASE_NAME=ESP32_MULTI_USREMODS
+;
+; disable specific features
+;   -D WLED_DISABLE_OTA
+;   -D WLED_DISABLE_ALEXA
+;   -D WLED_DISABLE_HUESYNC
+;   -D WLED_DISABLE_LOXONE
+;   -D WLED_DISABLE_INFRARED
+;   -D WLED_DISABLE_WEBSOCKETS
+;   -D WLED_DISABLE_MQTT
+;   -D WLED_DISABLE_ADALIGHT
+;   -D WLED_DISABLE_2D
+;   -D WLED_DISABLE_PXMAGIC
+;   -D WLED_DISABLE_ESPNOW
+;   -D WLED_DISABLE_BROWNOUT_DET
+;
+; enable optional built-in features
+;   -D WLED_ENABLE_PIXART
+;   -D WLED_ENABLE_USERMOD_PAGE # if created
+;   -D WLED_ENABLE_DMX
+;
+; PIN defines - uncomment and change, if needed:
+;   -D LEDPIN=2
+; or use this for multiple outputs
+;   -D DATA_PINS=1,3
+;   -D BTNPIN=0
+;   -D IRPIN=4
+;   -D RLYPIN=12
+;   -D RLYMDE=1
+;   -D RLYODRAIN=0
+;   -D LED_BUILTIN=2 # GPIO of built-in LED
+;
+; Limit max buses
+;   -D WLED_MAX_BUSSES=2
+;   -D WLED_MAX_ANALOG_CHANNELS=3   # only 3 PWM HW pins available
+;   -D WLED_MAX_DIGITAL_CHANNELS=2  # only 2 HW accelerated pins available
+;
+; Configure default WiFi
+;   -D CLIENT_SSID='"MyNetwork"'
+;   -D CLIENT_PASS='"Netw0rkPassw0rd"'
+;
+; Configure and use Ethernet
+;   -D WLED_USE_ETHERNET
+;   -D WLED_ETH_DEFAULT=5
+; do not use pins 5, (16,) 17, 18, 19, 21, 22, 23, 25, 26, 27 for anything but ethernet
+;   -D PHY_ADDR=0 -D ETH_PHY_POWER=5 -D ETH_PHY_MDC=23 -D ETH_PHY_MDIO=18
+;   -D ETH_CLK_MODE=ETH_CLOCK_GPIO17_OUT
+;
+; NTP time configuration
+;   -D WLED_NTP_ENABLED=true
+;   -D WLED_TIMEZONE=2
+;   -D WLED_LAT=48.86
+;   -D WLED_LON=2.33
+;
+; Use Watchdog timer with 10s guard
+;   -D WLED_WATCHDOG_TIMEOUT=10
+;
+; Create debug build (with remote debug)
+;   -D WLED_DEBUG
+;   -D WLED_DEBUG_HOST='"192.168.0.100"'
+;   -D WLED_DEBUG_PORT=7868
+;
+; Use Autosave usermod and set it to do save after 90s
+;   -D USERMOD_AUTO_SAVE
+;   -D AUTOSAVE_AFTER_SEC=90
+;
+; Use AHT10/AHT15/AHT20 usermod
+;   -D USERMOD_AHT10
+;
+; Use INA226 usermod
+;   -D USERMOD_INA226
+;
+; Use 4 Line Display usermod with SPI display
+;   -D USERMOD_FOUR_LINE_DISPLAY
+;   -D USE_ALT_DISPlAY # mandatory
+;   -DFLD_SPI_DEFAULT
+;   -D FLD_TYPE=SSD1306_SPI64
+;   -D FLD_PIN_CLOCKSPI=14
+;   -D FLD_PIN_DATASPI=13
+;   -D FLD_PIN_DC=26
+;   -D FLD_PIN_CS=15
+;   -D FLD_PIN_RESET=27
+;
+; Use Rotary encoder usermod (in conjunction with 4LD)
+;   -D USERMOD_ROTARY_ENCODER_UI
+;   -D ENCODER_DT_PIN=5
+;   -D ENCODER_CLK_PIN=18
+;   -D ENCODER_SW_PIN=19
+;
+; Use Dallas DS18B20 temperature sensor usermod and configure it to use GPIO13
+;   -D USERMOD_DALLASTEMPERATURE
+;   -D TEMPERATURE_PIN=13
+;
+; Use Multi Relay usermod and configure it to use 6 relays and appropriate GPIO
+;   -D USERMOD_MULTI_RELAY
+;   -D MULTI_RELAY_MAX_RELAYS=6
+;   -D MULTI_RELAY_PINS=12,23,22,21,24,25
+;
+; Use PIR sensor usermod and configure it to use GPIO4 and timer of 60s
+;   -D USERMOD_PIRSWITCH
+;   -D PIR_SENSOR_PIN=4   # use -1 to disable usermod
+;   -D PIR_SENSOR_OFF_SEC=60
+;   -D PIR_SENSOR_MAX_SENSORS=2 # max allowable sensors (uses OR logic for triggering)
+;
+; Use Audioreactive usermod and configure I2S microphone
+;   -D USERMOD_AUDIOREACTIVE
+;   -D AUDIOPIN=-1
+;   -D DMTYPE=1     # 0-analog/disabled, 1-I2S generic, 2-ES7243, 3-SPH0645, 4-I2S+mclk, 5-I2S PDM
+;   -D I2S_SDPIN=36
+;   -D I2S_WSPIN=23
+;   -D I2S_CKPIN=19
+;
+; Use PWM fan usermod
+;   -D USERMOD_PWM_FAN
+;   -D TACHO_PIN=33
+;   -D PWM_PIN=32
+;
+; Use built-in or custom LED as a status indicator (assumes LED is connected to GPIO16)
+;   -D STATUSLED=16
+;   
+; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
+;   -D SERVERNAME="\"WLED\""
+;   
+; set the number of LEDs
+;   -D DEFAULT_LED_COUNT=30
+; or this for multiple outputs
+;   -D PIXEL_COUNTS=30,30
+;
+; set the default LED type
+;   -D DEFAULT_LED_TYPE=22    # see const.h (TYPE_xxxx)
+;
+; set milliampere limit when using ESP power pin (or inadequate PSU) to power LEDs
+;   -D ABL_MILLIAMPS_DEFAULT=850
+;   -D LED_MILLIAMPS_DEFAULT=55
+;
+; enable IR by setting remote type
+;   -D IRTYPE=0   # 0 Remote disabled | 1 24-key RGB | 2 24-key with CT | 3 40-key blue | 4 40-key RGB | 5 21-key RGB | 6 6-key black | 7 9-key red | 8 JSON remote
+;   
+; set default color order of your led strip
+;   -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
+;
+; use PSRAM on classic ESP32 rev.1 (rev.3 or above has no issues)
+;   -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue   # needed only for classic ESP32 rev.1
+;
+; configure I2C and SPI interface (for various hardware)
+;   -D I2CSDAPIN=33 # initialise interface
+;   -D I2CSCLPIN=35 # initialise interface
+;   -D HW_PIN_SCL=35
+;   -D HW_PIN_SDA=33
+;   -D HW_PIN_CLOCKSPI=7
+;   -D HW_PIN_DATASPI=11
+;   -D HW_PIN_MISOSPI=9
+
+
+
+# ------------------------------------------------------------------------------
+# PRE-CONFIGURED DEVELOPMENT BOARDS AND CONTROLLERS
+# ------------------------------------------------------------------------------
+
+[env:esp07]
+board = esp07
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+
+[env:d1_mini]
+board = d1_mini
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+upload_speed = 921600
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+monitor_filters = esp8266_exception_decoder
+
+[env:heltec_wifi_kit_8]
+board = d1_mini
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+
+[env:h803wf]
+board = d1_mini
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+lib_deps = ${esp8266.lib_deps}
+
+[env:esp32dev_qio80]
+board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
+lib_deps = ${esp32.lib_deps}
+monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32.default_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+
+[env:esp32dev_V4_dio80]
+;; experimental ESP32 env using ESP-IDF V4.4.x
+;; Warning: this build environment is not stable!!
+;; please erase your device before installing.
+board = esp32dev
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
+lib_deps = ${esp32_idf_V4.lib_deps}
+monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32_idf_V4.default_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = dio
+
+[env:esp32s2_saola]
+board = esp32-s2-saola-1
+platform = ${esp32s2.platform}
+platform_packages = ${esp32s2.platform_packages}
+framework = arduino
+board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+board_build.flash_mode = qio
+upload_speed = 460800
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32s2.build_flags}
+  ;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
+  -DARDUINO_USB_CDC_ON_BOOT=1
+lib_deps = ${esp32s2.lib_deps}
+
+[env:esp32s3dev_8MB_PSRAM_qspi]
+;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
+extends = env:esp32s3dev_8MB_PSRAM_opi
+;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or  4MB
+
+[env:esp8285_4CH_MagicHome]
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_1m128k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
+lib_deps = ${esp8266.lib_deps}
+
+[env:esp8285_H801]
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_1m128k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
+lib_deps = ${esp8266.lib_deps}
+
+[env:d1_mini_5CH_Shojo_PCB]
+board = d1_mini
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB
+lib_deps = ${esp8266.lib_deps}
+
+[env:d1_mini_debug]
+board = d1_mini
+build_type = debug
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} ${common.debug_flags}
+lib_deps = ${esp8266.lib_deps}
+
+[env:d1_mini_ota]
+board = d1_mini
+upload_protocol = espota
+# exchange for your WLED IP
+upload_port = "10.10.1.27"
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+
+[env:anavi_miracle_controller]
+board = d1_mini
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
+lib_deps = ${esp8266.lib_deps}
+
+[env:esp32c3dev_2MB]
+;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
+;; this board need a specific partition file. OTA not possible.
+extends = esp32c3
+platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
+board = esp32-c3-devkitm-1
+build_flags = ${common.build_flags} ${esp32c3.build_flags}
+  -D WLED_WATCHDOG_TIMEOUT=0
+  -D WLED_DISABLE_OTA
+  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
+  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
+build_unflags = ${common.build_unflags}
+upload_speed = 115200
+lib_deps = ${esp32c3.lib_deps}
+board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
+board_build.flash_mode = dio
+
+[env:wemos_shield_esp32]
+board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+upload_speed = 460800
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32.build_flags}
+  -D LEDPIN=16
+  -D RLYPIN=19
+  -D BTNPIN=17
+  -D IRPIN=18
+  -D UWLED_USE_MY_CONFIG
+  -D USERMOD_DALLASTEMPERATURE
+  -D USERMOD_FOUR_LINE_DISPLAY
+  -D TEMPERATURE_PIN=23
+  -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
+  -D USERMOD_AUDIOREACTIVE
+lib_deps = ${esp32.lib_deps}
+  OneWire@~2.3.5
+  olikraus/U8g2 @ ^2.28.8
+  https://github.com/blazoncek/arduinoFFT.git
+board_build.partitions = ${esp32.default_partitions}
+
+[env:m5atom]
+board = esp32dev
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32.build_flags} -D LEDPIN=27 -D BTNPIN=39
+lib_deps = ${esp32.lib_deps}
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+board_build.partitions = ${esp32.default_partitions}
+
+[env:sp501e]
+board = esp_wroom_02
+platform = ${common.platform_wled_default}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=1
+lib_deps = ${esp8266.lib_deps}
+
+[env:sp511e]
+board = esp_wroom_02
+platform = ${common.platform_wled_default}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
+lib_deps = ${esp8266.lib_deps}
+
+[env:Athom_RGBCW]        ;7w and 5w(GU10) bulbs
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
+                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
+lib_deps = ${esp8266.lib_deps}
+
+[env:Athom_15w_RGBCW]        ;15w bulb
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
+                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
+lib_deps = ${esp8266.lib_deps}
+
+[env:Athom_3Pin_Controller]        ;small controller with only data
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+lib_deps = ${esp8266.lib_deps}
+
+[env:Athom_4Pin_Controller]       ; With clock and data interface
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+lib_deps = ${esp8266.lib_deps}
+
+[env:Athom_5Pin_Controller]      ;Analog light strip controller
+board = esp8285
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
+lib_deps = ${esp8266.lib_deps}
+
+[env:MY9291]
+board = esp01_1m
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_1m128k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA -D USERMOD_MY9291
+lib_deps = ${esp8266.lib_deps}
+
+# ------------------------------------------------------------------------------
+# codm pixel controller board configurations
+# codm-controller-0_6 can also be used for the TYWE3S controller
+# ------------------------------------------------------------------------------
+
+[env:codm-controller-0_6]
+board = esp_wroom_02
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_2m512k}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+
+[env:codm-controller-0_6-rev2]
+board = esp_wroom_02
+platform = ${common.platform_wled_default}
+platform_packages = ${common.platform_packages}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
+lib_deps = ${esp8266.lib_deps}
+
+# ------------------------------------------------------------------------------
+# EleksTube-IPS
+# ------------------------------------------------------------------------------
+[env:elekstube_ips]
+board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+upload_speed = 921600
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
+  -D USERMOD_RTC
+  -D USERMOD_ELEKSTUBE_IPS
+  -D LEDPIN=12
+  -D RLYPIN=27
+  -D BTNPIN=34
+  -D DEFAULT_LED_COUNT=6
+  # Display config
+  -D ST7789_DRIVER
+  -D TFT_WIDTH=135
+  -D TFT_HEIGHT=240
+  -D CGRAM_OFFSET
+  -D TFT_SDA_READ
+  -D TFT_MOSI=23
+  -D TFT_SCLK=18
+  -D TFT_DC=25
+  -D TFT_RST=26
+  -D SPI_FREQUENCY=40000000
+  -D USER_SETUP_LOADED
+monitor_filters = esp32_exception_decoder
+lib_deps =
+  ${esp32.lib_deps}
+  TFT_eSPI @ ^2.3.70
+board_build.partitions = ${esp32.default_partitions}

readme.md

@@ -3,7 +3,7 @@
   <a href="https://github.com/Aircoookie/WLED/releases"><img src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square"></a>
   <a href="https://raw.githubusercontent.com/Aircoookie/WLED/master/LICENSE"><img src="https://img.shields.io/github/license/Aircoookie/wled?color=blue&style=flat-square"></a>
   <a href="https://wled.discourse.group"><img src="https://img.shields.io/discourse/topics?colorB=blue&label=forum&server=https%3A%2F%2Fwled.discourse.group%2F&style=flat-square"></a>
-  <a href="https://discord.gg/KuqP7NE"><img src="https://img.shields.io/discord/473448917040758787.svg?colorB=blue&label=discord&style=flat-square"></a>
+  <a href="https://discord.gg/QAh7wJHrRM"><img src="https://img.shields.io/discord/473448917040758787.svg?colorB=blue&label=discord&style=flat-square"></a>
   <a href="https://kno.wled.ge"><img src="https://img.shields.io/badge/quick_start-wiki-blue.svg?style=flat-square"></a>
   <a href="https://github.com/Aircoookie/WLED-App"><img src="https://img.shields.io/badge/app-wled-blue.svg?style=flat-square"></a>
   <a href="https://gitpod.io/#https://github.com/Aircoookie/WLED"><img src="https://img.shields.io/badge/Gitpod-ready--to--code-blue?style=flat-square&logo=gitpod"></a>
@@ -26,7 +26,7 @@ A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control
 - Up to 250 user presets to save and load colors/effects easily, supports cycling through them.  
 - Presets can be used to automatically execute API calls  
 - Nightlight function (gradually dims down)  
-- Full OTA software updatability (HTTP + ArduinoOTA), password protectable  
+- Full OTA software updateability (HTTP + ArduinoOTA), password protectable  
 - Configurable analog clock (Cronixie, 7-segment and EleksTube IPS clock support via usermods) 
 - Configurable Auto Brightness limit for safe operation  
 - Filesystem-based config for easier backup of presets and settings  
@@ -66,7 +66,7 @@ Credits [here](https://kno.wled.ge/about/contributors/)!
 
 Join the Discord server to discuss everything about WLED!
 
-<a href="https://discord.gg/KuqP7NE"><img src="https://discordapp.com/api/guilds/473448917040758787/widget.png?style=banner2" width="25%"></a>
+<a href="https://discord.gg/QAh7wJHrRM"><img src="https://discordapp.com/api/guilds/473448917040758787/widget.png?style=banner2" width="25%"></a>
 
 Check out the WLED [Discourse forum](https://wled.discourse.group)!  
 

requirements.txt

@@ -1,6 +1,6 @@
 #
-# This file is autogenerated by pip-compile with python 3.8
-# To update, run:
+# This file is autogenerated by pip-compile with Python 3.12
+# by the following command:
 #
 #    pip-compile
 #
@@ -12,7 +12,7 @@ anyio==3.6.2
     # via starlette
 bottle==0.12.25
     # via platformio
-certifi==2022.12.7
+certifi==2023.7.22
     # via requests
 charset-normalizer==3.1.0
     # via requests
@@ -21,12 +21,14 @@ click==8.1.3
     #   platformio
     #   uvicorn
 colorama==0.4.6
-    # via platformio
+    # via
+    #   click
+    #   platformio
 h11==0.14.0
     # via
     #   uvicorn
     #   wsproto
-idna==3.4
+idna==3.7
     # via
     #   anyio
     #   requests
@@ -34,13 +36,13 @@ marshmallow==3.19.0
     # via platformio
 packaging==23.1
     # via marshmallow
-platformio==6.1.6
+platformio==6.1.14
     # via -r requirements.in
 pyelftools==0.29
     # via platformio
 pyserial==3.5
     # via platformio
-requests==2.31.0
+requests==2.32.0
     # via platformio
 semantic-version==2.10.0
     # via platformio
@@ -50,7 +52,9 @@ starlette==0.23.1
     # via platformio
 tabulate==0.9.0
     # via platformio
-urllib3==1.26.15
+typing-extensions==4.11.0
+    # via starlette
+urllib3==1.26.19
     # via requests
 uvicorn==0.20.0
     # via platformio

tools/WLED_ESP32-wrover_4MB.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType, Offset,  Size, Flags
 nvs,      data, nvs,     0x9000,  0x5000,
 otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x180000,
-app1,     app,  ota_1,   0x190000,0x180000,
-spiffs,   data, spiffs,  0x310000,0xF0000,
+app0,     app,  ota_0,   0x10000, 0x1A0000,
+app1,     app,  ota_1,   0x1B0000,0x1A0000,
+spiffs,   data, spiffs,  0x350000,0xB0000,

tools/WLED_ESP32_16MB_9MB_FS.csv

@@ -0,0 +1,8 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x300000,
+app1,     app,  ota_1,   0x310000,0x300000,
+spiffs,   data, spiffs,  0x610000,0x9E0000,
+coredump, data, coredump,,64K
+# to create/use ffat, see https://github.com/marcmerlin/esp32_fatfsimage

tools/WLED_ESP32_4MB_256KB_FS.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1D0000,
+app1,     app,  ota_1,   0x1E0000,0x1D0000,
+spiffs,   data, spiffs,  0x3B0000,0x40000,
+coredump, data, coredump,,64K

tools/WLED_ESP32_4MB_700k_FS.csv

@@ -0,0 +1,6 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1A0000,
+app1,     app,  ota_1,   0x1B0000,0x1A0000,
+spiffs,   data, spiffs,  0x350000,0xB0000,

tools/WLED_ESP32_8MB.csv

@@ -3,4 +3,5 @@ nvs,      data, nvs,     0x9000,  0x5000,
 otadata,  data, ota,     0xe000,  0x2000,
 app0,     app,  ota_0,   0x10000, 0x200000,
 app1,     app,  ota_1,   0x210000,0x200000,
-spiffs,   data, spiffs,  0x410000,0x3F0000,
+spiffs,   data, spiffs,  0x410000,0x3E0000,
+coredump, data, coredump,,64K

tools/cdata-test.js

@@ -0,0 +1,212 @@
+'use strict';
+
+const assert = require('node:assert');
+const { describe, it, before, after } = require('node:test');
+const fs = require('fs');
+const path = require('path');
+const child_process = require('child_process');
+const util = require('util');
+const execPromise = util.promisify(child_process.exec);
+
+process.env.NODE_ENV = 'test'; // Set the environment to testing
+const cdata = require('./cdata.js');
+
+describe('Function', () => {
+  const testFolderPath = path.join(__dirname, 'testFolder');
+  const oldFilePath = path.join(testFolderPath, 'oldFile.txt');
+  const newFilePath = path.join(testFolderPath, 'newFile.txt');
+
+  // Create a temporary file before the test
+  before(() => {
+    // Create test folder
+    if (!fs.existsSync(testFolderPath)) {
+      fs.mkdirSync(testFolderPath);
+    }
+
+    // Create an old file
+    fs.writeFileSync(oldFilePath, 'This is an old file.');
+    // Modify the 'mtime' to simulate an old file
+    const oldTime = new Date();
+    oldTime.setFullYear(oldTime.getFullYear() - 1);
+    fs.utimesSync(oldFilePath, oldTime, oldTime);
+
+    // Create a new file
+    fs.writeFileSync(newFilePath, 'This is a new file.');
+  });
+
+  // delete the temporary files after the test
+  after(() => {
+    fs.rmSync(testFolderPath, { recursive: true });
+  });
+
+  describe('isFileNewerThan', async () => {
+    it('should return true if the file is newer than the provided time', async () => {
+      const pastTime = Date.now() - 10000; // 10 seconds ago
+      assert.strictEqual(cdata.isFileNewerThan(newFilePath, pastTime), true);
+    });
+
+    it('should return false if the file is older than the provided time', async () => {
+      assert.strictEqual(cdata.isFileNewerThan(oldFilePath, Date.now()), false);
+    });
+
+    it('should throw an exception if the file does not exist', async () => {
+      assert.throws(() => {
+        cdata.isFileNewerThan('nonexistent.txt', Date.now());
+      });
+    });
+  });
+
+  describe('isAnyFileInFolderNewerThan', async () => {
+    it('should return true if a file in the folder is newer than the given time', async () => {
+      const time = fs.statSync(path.join(testFolderPath, 'oldFile.txt')).mtime;
+      assert.strictEqual(cdata.isAnyFileInFolderNewerThan(testFolderPath, time), true);
+    });
+
+    it('should return false if no files in the folder are newer than the given time', async () => {
+      assert.strictEqual(cdata.isAnyFileInFolderNewerThan(testFolderPath, new Date()), false);
+    });
+
+    it('should throw an exception if the folder does not exist', async () => {
+      assert.throws(() => {
+        cdata.isAnyFileInFolderNewerThan('nonexistent', new Date());
+      });
+    });
+  });
+});
+
+describe('Script', () => {
+  const folderPath = 'wled00';
+  const dataPath = path.join(folderPath, 'data');
+
+  before(() => {
+    process.env.NODE_ENV = 'production';
+    // Backup files
+    fs.cpSync("wled00/data", "wled00Backup", { recursive: true });
+    fs.cpSync("tools/cdata.js", "cdata.bak.js");
+    fs.cpSync("package.json", "package.bak.json");
+  });
+  after(() => {
+    // Restore backup
+    fs.rmSync("wled00/data", { recursive: true });
+    fs.renameSync("wled00Backup", "wled00/data");
+    fs.rmSync("tools/cdata.js");
+    fs.renameSync("cdata.bak.js", "tools/cdata.js");
+    fs.rmSync("package.json");
+    fs.renameSync("package.bak.json", "package.json");
+  });
+
+  // delete all html_*.h files
+  async function deleteBuiltFiles() {
+    const files = await fs.promises.readdir(folderPath);
+    await Promise.all(files.map(file => {
+      if (file.startsWith('html_') && path.extname(file) === '.h') {
+        return fs.promises.unlink(path.join(folderPath, file));
+      }
+    }));
+  }
+
+  // check if html_*.h files were created
+  async function checkIfBuiltFilesExist() {
+    const files = await fs.promises.readdir(folderPath);
+    const htmlFiles = files.filter(file => file.startsWith('html_') && path.extname(file) === '.h');
+    assert(htmlFiles.length > 0, 'html_*.h files were not created');
+  }
+
+  async function runAndCheckIfBuiltFilesExist() {
+    await execPromise('node tools/cdata.js');
+    await checkIfBuiltFilesExist();
+  }
+
+  async function checkIfFileWasNewlyCreated(file) {
+    const modifiedTime = fs.statSync(file).mtimeMs;
+    assert(Date.now() - modifiedTime < 500, file + ' was not modified');
+  }
+
+  async function testFileModification(sourceFilePath, resultFile) {
+    // run cdata.js to ensure html_*.h files are created
+    await execPromise('node tools/cdata.js');
+
+    // modify file
+    fs.appendFileSync(sourceFilePath, ' ');
+    // delay for 1 second to ensure the modified time is different
+    await new Promise(resolve => setTimeout(resolve, 1000));
+
+    // run script cdata.js again and wait for it to finish
+    await execPromise('node tools/cdata.js');
+
+    await checkIfFileWasNewlyCreated(path.join(folderPath, resultFile));
+  }
+
+  describe('should build if', () => {
+    it('html_*.h files are missing', async () => {
+      await deleteBuiltFiles();
+      await runAndCheckIfBuiltFilesExist();
+    });
+
+    it('only one html_*.h file is missing', async () => {
+      // run script cdata.js and wait for it to finish
+      await execPromise('node tools/cdata.js');
+
+      // delete a random html_*.h file
+      let files = await fs.promises.readdir(folderPath);
+      let htmlFiles = files.filter(file => file.startsWith('html_') && path.extname(file) === '.h');
+      const randomFile = htmlFiles[Math.floor(Math.random() * htmlFiles.length)];
+      await fs.promises.unlink(path.join(folderPath, randomFile));
+
+      await runAndCheckIfBuiltFilesExist();
+    });
+
+    it('script was executed with -f or --force', async () => {
+      await execPromise('node tools/cdata.js');
+      await new Promise(resolve => setTimeout(resolve, 1000));
+      await execPromise('node tools/cdata.js --force');
+      await checkIfFileWasNewlyCreated(path.join(folderPath, 'html_ui.h'));
+      await new Promise(resolve => setTimeout(resolve, 1000));
+      await execPromise('node tools/cdata.js -f');
+      await checkIfFileWasNewlyCreated(path.join(folderPath, 'html_ui.h'));
+    });
+
+    it('a file changes', async () => {
+      await testFileModification(path.join(dataPath, 'index.htm'), 'html_ui.h');
+    });
+
+    it('a inlined file changes', async () => {
+      await testFileModification(path.join(dataPath, 'index.js'), 'html_ui.h');
+    });
+
+    it('a settings file changes', async () => {
+      await testFileModification(path.join(dataPath, 'settings_leds.htm'), 'html_ui.h');
+    });
+
+    it('the favicon changes', async () => {
+      await testFileModification(path.join(dataPath, 'favicon.ico'), 'html_ui.h');
+    });
+
+    it('cdata.js changes', async () => {
+      await testFileModification('tools/cdata.js', 'html_ui.h');
+    });
+
+    it('package.json changes', async () => {
+      await testFileModification('package.json', 'html_ui.h');
+    });
+  });
+
+  describe('should not build if', () => {
+    it('the files are already built', async () => {
+      await deleteBuiltFiles();
+
+      // run script cdata.js and wait for it to finish
+      let startTime = Date.now();
+      await execPromise('node tools/cdata.js');
+      const firstRunTime = Date.now() - startTime;
+
+      // run script cdata.js and wait for it to finish
+      startTime = Date.now();
+      await execPromise('node tools/cdata.js');
+      const secondRunTime = Date.now() - startTime;
+
+      // check if second run was faster than the first (must be at least 2x faster)
+      assert(secondRunTime < firstRunTime / 2, 'html_*.h files were rebuilt');
+    });
+  });
+});

tools/cdata.js

@@ -2,7 +2,7 @@
  * Writes compressed C arrays of data files (web interface)
  * How to use it?
  *
- * 1) Install Node 11+ and npm
+ * 1) Install Node 20+ and npm
  * 2) npm install
  * 3) npm run build
  *
@@ -15,26 +15,58 @@
  * It uses NodeJS packages to inline, minify and GZIP files. See writeHtmlGzipped and writeChunks invocations at the bottom of the page.
  */
 
-const fs = require("fs");
+const fs = require("node:fs");
+const path = require("path");
 const inliner = require("inliner");
-const zlib = require("zlib");
+const zlib = require("node:zlib");
 const CleanCSS = require("clean-css");
-const MinifyHTML = require("html-minifier-terser").minify;
+const minifyHtml = require("html-minifier-terser").minify;
 const packageJson = require("../package.json");
 
-/**
- *
+// Export functions for testing
+module.exports = { isFileNewerThan, isAnyFileInFolderNewerThan };
+
+const output = ["wled00/html_ui.h", "wled00/html_pixart.h", "wled00/html_cpal.h", "wled00/html_pxmagic.h", "wled00/html_settings.h", "wled00/html_other.h"]
+
+// \x1b[34m is blue, \x1b[36m is cyan, \x1b[0m is reset
+const wledBanner = `
+\t\x1b[34m  ##  ##      ##        ######    ######
+\t\x1b[34m##      ##    ##      ##        ##  ##  ##
+\t\x1b[34m##  ##  ##  ##        ######        ##  ##
+\t\x1b[34m##  ##  ##  ##        ##            ##  ##
+\t\x1b[34m  ##  ##      ######    ######    ######
+\t\t\x1b[36m build script for web UI
+\x1b[0m`;
+
+const singleHeader = `/*
+ * Binary array for the Web UI.
+ * gzip is used for smaller size and improved speeds.
+ * 
+ * Please see https://kno.wled.ge/advanced/custom-features/#changing-web-ui
+ * to find out how to easily modify the web UI source!
  */
-function hexdump(buffer,isHex=false) {
+ 
+`;
+
+const multiHeader = `/*
+ * More web UI HTML source arrays.
+ * This file is auto generated, please don't make any changes manually.
+ *
+ * Instead, see https://kno.wled.ge/advanced/custom-features/#changing-web-ui
+ * to find out how to easily modify the web UI source!
+ */
+`;
+
+function hexdump(buffer, isHex = false) {
   let lines = [];
 
-  for (let i = 0; i < buffer.length; i +=(isHex?32:16)) {
+  for (let i = 0; i < buffer.length; i += (isHex ? 32 : 16)) {
     var block;
     let hexArray = [];
     if (isHex) {
       block = buffer.slice(i, i + 32)
-      for (let j = 0; j < block.length; j +=2 ) {
-        hexArray.push("0x" + block.slice(j,j+2))
+      for (let j = 0; j < block.length; j += 2) {
+        hexArray.push("0x" + block.slice(j, j + 2))
       }
     } else {
       block = buffer.slice(i, i + 16); // cut buffer into blocks of 16
@@ -51,204 +83,163 @@ function hexdump(buffer,isHex=false) {
   return lines.join(",\n");
 }
 
-function strReplace(str, search, replacement) {
-  return str.split(search).join(replacement);
-}
-
 function adoptVersionAndRepo(html) {
   let repoUrl = packageJson.repository ? packageJson.repository.url : undefined;
   if (repoUrl) {
     repoUrl = repoUrl.replace(/^git\+/, "");
     repoUrl = repoUrl.replace(/\.git$/, "");
-    // Replace we
-    html = strReplace(html, "https://github.com/atuline/WLED", repoUrl);
-    html = strReplace(html, "https://github.com/Aircoookie/WLED", repoUrl);
+    html = html.replaceAll("https://github.com/atuline/WLED", repoUrl);
+    html = html.replaceAll("https://github.com/Aircoookie/WLED", repoUrl);
   }
   let version = packageJson.version;
   if (version) {
-    html = strReplace(html, "##VERSION##", version);
+    html = html.replaceAll("##VERSION##", version);
   }
   return html;
 }
 
-function filter(str, type) {
-  str = adoptVersionAndRepo(str);
-  if (type === undefined) {
+async function minify(str, type = "plain") {
+  const options = {
+    collapseWhitespace: true,
+    collapseBooleanAttributes: true,
+    collapseInlineTagWhitespace: true,
+    minifyCSS: true,
+    minifyJS: true,
+    removeAttributeQuotes: true,
+    removeComments: true,
+    sortAttributes: true,
+    sortClassName: true,
+  };
+
+  if (type == "plain") {
     return str;
   } else if (type == "css-minify") {
     return new CleanCSS({}).minify(str).styles;
   } else if (type == "js-minify") {
-    return MinifyHTML('<script>' + str + '</script>', {
-      collapseWhitespace: true,
-      minifyJS: true, 
-      continueOnParseError: false,
-      removeComments: true,
-    }).replace(/<[\/]*script>/g,'');
+    return await minifyHtml('<script>' + str + '</script>', options).replace(/<[\/]*script>/g, '');
   } else if (type == "html-minify") {
-    return MinifyHTML(str, {
-      collapseWhitespace: true,
-      maxLineLength: 80,
-      minifyCSS: true,
-      minifyJS: true, 
-      continueOnParseError: false,
-      removeComments: true,
-    });
-  } else if (type == "html-minify-ui") {
-    return MinifyHTML(str, {
-      collapseWhitespace: true,
-      conservativeCollapse: true,
-      maxLineLength: 80,
-      minifyCSS: true,
-      minifyJS: true, 
-      continueOnParseError: false,
-      removeComments: true,
-    });
-  } else {
-    console.warn("Unknown filter: " + type);
-    return str;
+    return await minifyHtml(str, options);
   }
+
+  throw new Error("Unknown filter: " + type);
 }
 
-function writeHtmlGzipped(sourceFile, resultFile, page) {
+async function writeHtmlGzipped(sourceFile, resultFile, page) {
   console.info("Reading " + sourceFile);
-  new inliner(sourceFile, function (error, html) {
-    console.info("Inlined " + html.length + " characters");
-    html = filter(html, "html-minify-ui");
-    console.info("Minified to " + html.length + " characters");
-
-    if (error) {
-      console.warn(error);
-      throw error;
-    }
+  new inliner(sourceFile, async function (error, html) {
+    if (error) throw error;
 
     html = adoptVersionAndRepo(html);
-    zlib.gzip(html, { level: zlib.constants.Z_BEST_COMPRESSION }, function (error, result) {
-      if (error) {
-        console.warn(error);
-        throw error;
-      }
-
-      console.info("Compressed " + result.length + " bytes");
-      const array = hexdump(result);
-      const src = `/*
- * Binary array for the Web UI.
- * gzip is used for smaller size and improved speeds.
- * 
- * Please see https://kno.wled.ge/advanced/custom-features/#changing-web-ui
- * to find out how to easily modify the web UI source!
- */
- 
-// Autogenerated from ${sourceFile}, do not edit!!
-const uint16_t PAGE_${page}_L = ${result.length};
-const uint8_t PAGE_${page}[] PROGMEM = {
-${array}
-};
-`;
-      console.info("Writing " + resultFile);
-      fs.writeFileSync(resultFile, src);
-    });
+    const originalLength = html.length;
+    html = await minify(html, "html-minify");
+    const result = zlib.gzipSync(html, { level: zlib.constants.Z_BEST_COMPRESSION });
+    console.info("Minified and compressed " + sourceFile + " from " + originalLength + " to " + result.length + " bytes");
+    const array = hexdump(result);
+    let src = singleHeader;
+    src += `const uint16_t PAGE_${page}_L = ${result.length};\n`;
+    src += `const uint8_t PAGE_${page}[] PROGMEM = {\n${array}\n};\n\n`;
+    console.info("Writing " + resultFile);
+    fs.writeFileSync(resultFile, src);
   });
 }
 
-function specToChunk(srcDir, s) {
-  if (s.method == "plaintext") {
-    const buf = fs.readFileSync(srcDir + "/" + s.file);
-    const str = buf.toString("utf-8");
-    const chunk = `
-// Autogenerated from ${srcDir}/${s.file}, do not edit!!
-const char ${s.name}[] PROGMEM = R"${s.prepend || ""}${filter(str, s.filter)}${
-      s.append || ""
-    }";
+async function specToChunk(srcDir, s) {
+  const buf = fs.readFileSync(srcDir + "/" + s.file);
+  let chunk = `\n// Autogenerated from ${srcDir}/${s.file}, do not edit!!\n`
 
-`;
-    return s.mangle ? s.mangle(chunk) : chunk;
-  } else if (s.method == "gzip") {
-    const buf = fs.readFileSync(srcDir + "/" + s.file);
-    var str = buf.toString('utf-8');
-    if (s.mangle) str = s.mangle(str);
-    const zip = zlib.gzipSync(filter(str, s.filter), { level: zlib.constants.Z_BEST_COMPRESSION });
-    const result = hexdump(zip.toString('hex'), true);
-    const chunk = `
-// Autogenerated from ${srcDir}/${s.file}, do not edit!!
-const uint16_t ${s.name}_length = ${zip.length};
-const uint8_t ${s.name}[] PROGMEM = {
-${result}
-};
-
-`;
-    return chunk;
-  } else if (s.method == "binary") {
-    const buf = fs.readFileSync(srcDir + "/" + s.file);
-    const result = hexdump(buf);
-    const chunk = `
-// Autogenerated from ${srcDir}/${s.file}, do not edit!!
-const uint16_t ${s.name}_length = ${result.length};
-const uint8_t ${s.name}[] PROGMEM = {
-${result}
-};
-
-`;
-    return chunk;
-  } else {
-    console.warn("Unknown method: " + s.method);
-    return undefined;
-  }
-}
-
-function writeChunks(srcDir, specs, resultFile) {
-  let src = `/*
- * More web UI HTML source arrays.
- * This file is auto generated, please don't make any changes manually.
- * Instead, see https://kno.wled.ge/advanced/custom-features/#changing-web-ui
- * to find out how to easily modify the web UI source!
- */ 
-`;
-  specs.forEach((s) => {
-    try {
-      console.info("Reading " + srcDir + "/" + s.file + " as " + s.name);
-      src += specToChunk(srcDir, s);
-    } catch (e) {
-      console.warn(
-        "Failed " + s.name + " from " + srcDir + "/" + s.file,
-        e.message.length > 60 ? e.message.substring(0, 60) : e.message
-      );
+  if (s.method == "plaintext" || s.method == "gzip") {
+    let str = buf.toString("utf-8");
+    str = adoptVersionAndRepo(str);
+    const originalLength = str.length;
+    if (s.method == "gzip") {
+      if (s.mangle) str = s.mangle(str);
+      const zip = zlib.gzipSync(await minify(str, s.filter), { level: zlib.constants.Z_BEST_COMPRESSION });
+      console.info("Minified and compressed " + s.file + " from " + originalLength + " to " + zip.length + " bytes");
+      const result = hexdump(zip);
+      chunk += `const uint16_t ${s.name}_length = ${zip.length};\n`;
+      chunk += `const uint8_t ${s.name}[] PROGMEM = {\n${result}\n};\n\n`;
+      return chunk;
+    } else {
+      const minified = await minify(str, s.filter);
+      console.info("Minified " + s.file + " from " + originalLength + " to " + minified.length + " bytes");
+      chunk += `const char ${s.name}[] PROGMEM = R"${s.prepend || ""}${minified}${s.append || ""}";\n\n`;
+      return s.mangle ? s.mangle(chunk) : chunk;
     }
-  });
+  } else if (s.method == "binary") {
+    const result = hexdump(buf);
+    chunk += `const uint16_t ${s.name}_length = ${buf.length};\n`;
+    chunk += `const uint8_t ${s.name}[] PROGMEM = {\n${result}\n};\n\n`;
+    return chunk;
+  }
+
+  throw new Error("Unknown method: " + s.method);
+}
+
+async function writeChunks(srcDir, specs, resultFile) {
+  let src = multiHeader;
+  for (const s of specs) {
+    console.info("Reading " + srcDir + "/" + s.file + " as " + s.name);
+    src += await specToChunk(srcDir, s);
+  }
   console.info("Writing " + src.length + " characters into " + resultFile);
   fs.writeFileSync(resultFile, src);
 }
 
+// Check if a file is newer than a given time
+function isFileNewerThan(filePath, time) {
+  const stats = fs.statSync(filePath);
+  return stats.mtimeMs > time;
+}
+
+// Check if any file in a folder (or its subfolders) is newer than a given time
+function isAnyFileInFolderNewerThan(folderPath, time) {
+  const files = fs.readdirSync(folderPath, { withFileTypes: true });
+  for (const file of files) {
+    const filePath = path.join(folderPath, file.name);
+    if (isFileNewerThan(filePath, time)) {
+      return true;
+    }
+    if (file.isDirectory() && isAnyFileInFolderNewerThan(filePath, time)) {
+      return true;
+    }
+  }
+  return false;
+}
+
+// Check if the web UI is already built
+function isAlreadyBuilt(webUIPath, packageJsonPath = "package.json") {
+  let lastBuildTime = Infinity;
+
+  for (const file of output) {
+    try {
+      lastBuildTime = Math.min(lastBuildTime, fs.statSync(file).mtimeMs);
+    } catch (e) {
+      if (e.code !== 'ENOENT') throw e;
+      console.info("File " + file + " does not exist. Rebuilding...");
+      return false;
+    }
+  }
+
+  return !isAnyFileInFolderNewerThan(webUIPath, lastBuildTime) && !isFileNewerThan(packageJsonPath, lastBuildTime) && !isFileNewerThan(__filename, lastBuildTime);
+}
+
+// Don't run this script if we're in a test environment
+if (process.env.NODE_ENV === 'test') {
+  return;
+}
+
+console.info(wledBanner);
+
+if (isAlreadyBuilt("wled00/data") && process.argv[2] !== '--force' && process.argv[2] !== '-f') {
+  console.info("Web UI is already built");
+  return;
+}
+
 writeHtmlGzipped("wled00/data/index.htm", "wled00/html_ui.h", 'index');
-writeHtmlGzipped("wled00/data/simple.htm", "wled00/html_simple.h", 'simple');
 writeHtmlGzipped("wled00/data/pixart/pixart.htm", "wled00/html_pixart.h", 'pixart');
 writeHtmlGzipped("wled00/data/cpal/cpal.htm", "wled00/html_cpal.h", 'cpal');
 writeHtmlGzipped("wled00/data/pxmagic/pxmagic.htm", "wled00/html_pxmagic.h", 'pxmagic');
-/*
-writeChunks(
-  "wled00/data",
-  [
-    {
-      file: "simple.css",
-      name: "PAGE_simpleCss",
-      method: "gzip",
-      filter: "css-minify",
-    },
-    {
-      file: "simple.js",
-      name: "PAGE_simpleJs",
-      method: "gzip",
-      filter: "js-minify",
-    },
-    {
-      file: "simple.htm",
-      name: "PAGE_simple",
-      method: "gzip",
-      filter: "html-minify-ui",
-    }
-  ],
-  "wled00/html_simplex.h"
-);
-*/
+
 writeChunks(
   "wled00/data",
   [
@@ -259,7 +250,7 @@ writeChunks(
       filter: "css-minify",
       mangle: (str) =>
         str
-          .replace("%%","%")
+          .replace("%%", "%")
     },
     {
       file: "settings.htm",
@@ -390,12 +381,6 @@ const char PAGE_dmxmap[] PROGMEM = R"=====()=====";
       method: "gzip",
       filter: "html-minify",
     },
-    {
-      file: "liveviewws.htm",
-      name: "PAGE_liveviewws",
-      method: "gzip",
-      filter: "html-minify",
-    },
     {
       file: "liveviewws2D.htm",
       name: "PAGE_liveviewws2D",
@@ -412,16 +397,6 @@ const char PAGE_dmxmap[] PROGMEM = R"=====()=====";
       file: "favicon.ico",
       name: "favicon",
       method: "binary",
-    },
-    {
-      file: "iro.js",
-      name: "iroJs",
-      method: "gzip"
-    },
-    {
-      file: "rangetouch.js",
-      name: "rangetouchJs",
-      method: "gzip"
     }
   ],
   "wled00/html_other.h"

usermods/AHT10_v2/README.md

@@ -0,0 +1,36 @@
+# Usermod AHT10
+This Usermod is designed to read a `AHT10`, `AHT15` or `AHT20` sensor and output the following:
+- Temperature
+- Humidity
+
+Configuration is performed via the Usermod menu. The following settings can be configured in the Usermod Menu:
+- I2CAddress: The i2c address in decimal. Set it to either 56 (0x38, the default) or 57 (0x39).
+- SensorType, one of:
+  - 0 - AHT10
+  - 1 - AHT15
+  - 2 - AHT20
+- CheckInterval: Number of seconds between readings
+- Decimals: Number of decimals to put in the output
+
+Dependencies, These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+- Libraries
+  - `enjoyneering/AHT10@~1.1.0` (by [enjoyneering](https://registry.platformio.org/libraries/enjoyneering/AHT10))
+  - `Wire`
+
+## Author
+[@LordMike](https://github.com/LordMike)
+
+# Compiling
+
+To enable, compile with `USERMOD_AHT10` defined  (e.g. in `platformio_override.ini`)
+```ini
+[env:aht10_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0
+```

usermods/AHT10_v2/platformio_override.ini

@@ -0,0 +1,9 @@
+[env:aht10_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0

usermods/AHT10_v2/usermod_aht10.h

@@ -0,0 +1,327 @@
+#pragma once
+
+#include "wled.h"
+#include <AHT10.h>
+
+#define AHT10_SUCCESS 1
+
+class UsermodAHT10 : public Usermod
+{
+private:
+  static const char _name[];
+
+  unsigned long _lastLoopCheck = 0;
+
+  bool _settingEnabled : 1;    // Enable the usermod
+  bool _mqttPublish : 1;       // Publish mqtt values
+  bool _mqttPublishAlways : 1; // Publish always, regardless if there is a change
+  bool _mqttHomeAssistant : 1; // Enable Home Assistant docs
+  bool _initDone : 1;          // Initialization is done
+
+  // Settings. Some of these are stored in a different format than they're user settings - so we don't have to convert at runtime
+  uint8_t _i2cAddress = AHT10_ADDRESS_0X38;
+  ASAIR_I2C_SENSOR _ahtType = AHT10_SENSOR;
+  uint16_t _checkInterval = 60000; // milliseconds, user settings is in seconds
+  float _decimalFactor = 100;      // a power of 10 factor. 1 would be no change, 10 is one decimal, 100 is two etc. User sees a power of 10 (0, 1, 2, ..)
+
+  uint8_t _lastStatus = 0;
+  float _lastHumidity = 0;
+  float _lastTemperature = 0;
+
+#ifndef WLED_MQTT_DISABLE
+  float _lastHumiditySent = 0;
+  float _lastTemperatureSent = 0;
+#endif
+
+  AHT10 *_aht = nullptr;
+
+  float truncateDecimals(float val)
+  {
+    return roundf(val * _decimalFactor) / _decimalFactor;
+  }
+
+  void initializeAht()
+  {
+    if (_aht != nullptr)
+    {
+      delete _aht;
+    }
+
+    _aht = new AHT10(_i2cAddress, _ahtType);
+
+    _lastStatus = 0;
+    _lastHumidity = 0;
+    _lastTemperature = 0;
+  }
+
+  ~UsermodAHT10()
+  {
+    delete _aht;
+    _aht = nullptr;
+  }
+
+#ifndef WLED_DISABLE_MQTT
+  void mqttInitialize()
+  {
+    // This is a generic "setup mqtt" function, So we must abort if we're not to do mqtt
+    if (!WLED_MQTT_CONNECTED || !_mqttPublish || !_mqttHomeAssistant)
+      return;
+
+    char topic[128];
+    snprintf_P(topic, 127, "%s/temperature", mqttDeviceTopic);
+    mqttCreateHassSensor(F("Temperature"), topic, F("temperature"), F("°C"));
+
+    snprintf_P(topic, 127, "%s/humidity", mqttDeviceTopic);
+    mqttCreateHassSensor(F("Humidity"), topic, F("humidity"), F("%"));
+  }
+
+  void mqttPublishIfChanged(const __FlashStringHelper *topic, float &lastState, float state, float minChange)
+  {
+    // Check if MQTT Connected, otherwise it will crash the 8266
+    // Only report if the change is larger than the required diff
+    if (WLED_MQTT_CONNECTED && _mqttPublish && (_mqttPublishAlways || fabsf(lastState - state) > minChange))
+    {
+      char subuf[128];
+      snprintf_P(subuf, 127, PSTR("%s/%s"), mqttDeviceTopic, (const char *)topic);
+      mqtt->publish(subuf, 0, false, String(state).c_str());
+
+      lastState = state;
+    }
+  }
+
+  // Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
+  void mqttCreateHassSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+  {
+    String t = String(F("homeassistant/sensor/")) + mqttClientID + "/" + name + F("/config");
+
+    StaticJsonDocument<600> doc;
+
+    doc[F("name")] = name;
+    doc[F("state_topic")] = topic;
+    doc[F("unique_id")] = String(mqttClientID) + name;
+    if (unitOfMeasurement != "")
+      doc[F("unit_of_measurement")] = unitOfMeasurement;
+    if (deviceClass != "")
+      doc[F("device_class")] = deviceClass;
+    doc[F("expire_after")] = 1800;
+
+    JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
+    device[F("name")] = serverDescription;
+    device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+    device[F("manufacturer")] = F(WLED_BRAND);
+    device[F("model")] = F(WLED_PRODUCT_NAME);
+    device[F("sw_version")] = versionString;
+
+    String temp;
+    serializeJson(doc, temp);
+    DEBUG_PRINTLN(t);
+    DEBUG_PRINTLN(temp);
+
+    mqtt->publish(t.c_str(), 0, true, temp.c_str());
+  }
+#endif
+
+public:
+  void setup()
+  {
+    initializeAht();
+  }
+
+  void loop()
+  {
+    // if usermod is disabled or called during strip updating just exit
+    // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
+    if (!_settingEnabled || strip.isUpdating())
+      return;
+
+    // do your magic here
+    unsigned long currentTime = millis();
+
+    if (currentTime - _lastLoopCheck < _checkInterval)
+      return;
+    _lastLoopCheck = currentTime;
+
+    _lastStatus = _aht->readRawData();
+
+    if (_lastStatus == AHT10_ERROR)
+    {
+      // Perform softReset and retry
+      DEBUG_PRINTLN(F("AHTxx returned error, doing softReset"));
+      if (!_aht->softReset())
+      {
+        DEBUG_PRINTLN(F("softReset failed"));
+        return;
+      }
+
+      _lastStatus = _aht->readRawData();
+    }
+
+    if (_lastStatus == AHT10_SUCCESS)
+    {
+      float temperature = truncateDecimals(_aht->readTemperature(AHT10_USE_READ_DATA));
+      float humidity = truncateDecimals(_aht->readHumidity(AHT10_USE_READ_DATA));
+
+#ifndef WLED_DISABLE_MQTT
+      // Push to MQTT
+
+      // We can avoid reporting if the change is insignificant. The threshold chosen is below the level of accuracy, but way above 0.01 which is the precision of the value provided.
+      // The AHT10/15/20 has an accuracy of 0.3C in the temperature readings
+      mqttPublishIfChanged(F("temperature"), _lastTemperatureSent, temperature, 0.1f);
+
+      // The AHT10/15/20 has an accuracy in the humidity sensor of 2%
+      mqttPublishIfChanged(F("humidity"), _lastHumiditySent, humidity, 0.5f);
+#endif
+
+      // Store
+      _lastTemperature = temperature;
+      _lastHumidity = humidity;
+    }
+  }
+
+#ifndef WLED_DISABLE_MQTT
+  void onMqttConnect(bool sessionPresent)
+  {
+    mqttInitialize();
+  }
+#endif
+
+  uint16_t getId()
+  {
+    return USERMOD_ID_AHT10;
+  }
+
+  void addToJsonInfo(JsonObject &root) override
+  {
+    // if "u" object does not exist yet wee need to create it
+    JsonObject user = root["u"];
+    if (user.isNull())
+      user = root.createNestedObject("u");
+
+#ifdef USERMOD_AHT10_DEBUG
+    JsonArray temp = user.createNestedArray(F("AHT last loop"));
+    temp.add(_lastLoopCheck);
+
+    temp = user.createNestedArray(F("AHT last status"));
+    temp.add(_lastStatus);
+#endif
+
+    JsonArray jsonTemp = user.createNestedArray(F("Temperature"));
+    JsonArray jsonHumidity = user.createNestedArray(F("Humidity"));
+
+    if (_lastLoopCheck == 0)
+    {
+      // Before first run
+      jsonTemp.add(F("Not read yet"));
+      jsonHumidity.add(F("Not read yet"));
+      return;
+    }
+
+    if (_lastStatus != AHT10_SUCCESS)
+    {
+      jsonTemp.add(F("An error occurred"));
+      jsonHumidity.add(F("An error occurred"));
+      return;
+    }
+
+    jsonTemp.add(_lastTemperature);
+    jsonTemp.add(F("°C"));
+
+    jsonHumidity.add(_lastHumidity);
+    jsonHumidity.add(F("%"));
+  }
+
+  void addToConfig(JsonObject &root)
+  {
+    JsonObject top = root.createNestedObject(FPSTR(_name));
+    top[F("Enabled")] = _settingEnabled;
+    top[F("I2CAddress")] = static_cast<uint8_t>(_i2cAddress);
+    top[F("SensorType")] = _ahtType;
+    top[F("CheckInterval")] = _checkInterval / 1000;
+    top[F("Decimals")] = log10f(_decimalFactor);
+#ifndef WLED_DISABLE_MQTT
+    top[F("MqttPublish")] = _mqttPublish;
+    top[F("MqttPublishAlways")] = _mqttPublishAlways;
+    top[F("MqttHomeAssistantDiscovery")] = _mqttHomeAssistant;
+#endif
+
+    DEBUG_PRINTLN(F("AHT10 config saved."));
+  }
+
+  bool readFromConfig(JsonObject &root) override
+  {
+    // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
+    // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
+
+    JsonObject top = root[FPSTR(_name)];
+
+    bool configComplete = !top.isNull();
+    if (!configComplete)
+      return false;
+
+    bool tmpBool = false;
+    configComplete &= getJsonValue(top[F("Enabled")], tmpBool);
+    if (configComplete)
+      _settingEnabled = tmpBool;
+
+    configComplete &= getJsonValue(top[F("I2CAddress")], _i2cAddress);
+    configComplete &= getJsonValue(top[F("CheckInterval")], _checkInterval);
+    if (configComplete)
+    {
+      if (1 <= _checkInterval && _checkInterval <= 600)
+        _checkInterval *= 1000;
+      else
+        // Invalid input
+        _checkInterval = 60000;
+    }
+
+    configComplete &= getJsonValue(top[F("Decimals")], _decimalFactor);
+    if (configComplete)
+    {
+      if (0 <= _decimalFactor && _decimalFactor <= 5)
+        _decimalFactor = pow10f(_decimalFactor);
+      else
+        // Invalid input
+        _decimalFactor = 100;
+    }
+
+    uint8_t tmpAhtType;
+    configComplete &= getJsonValue(top[F("SensorType")], tmpAhtType);
+    if (configComplete)
+    {
+      if (0 <= tmpAhtType && tmpAhtType <= 2)
+        _ahtType = static_cast<ASAIR_I2C_SENSOR>(tmpAhtType);
+      else
+        // Invalid input
+        _ahtType = ASAIR_I2C_SENSOR::AHT10_SENSOR;
+    }
+
+#ifndef WLED_DISABLE_MQTT
+    configComplete &= getJsonValue(top[F("MqttPublish")], tmpBool);
+    if (configComplete)
+      _mqttPublish = tmpBool;
+
+    configComplete &= getJsonValue(top[F("MqttPublishAlways")], tmpBool);
+    if (configComplete)
+      _mqttPublishAlways = tmpBool;
+
+    configComplete &= getJsonValue(top[F("MqttHomeAssistantDiscovery")], tmpBool);
+    if (configComplete)
+      _mqttHomeAssistant = tmpBool;
+#endif
+
+    if (_initDone)
+    {
+      // Reloading config
+      initializeAht();
+
+#ifndef WLED_DISABLE_MQTT
+      mqttInitialize();
+#endif
+    }
+
+    _initDone = true;
+    return configComplete;
+  }
+};
+
+const char UsermodAHT10::_name[] PROGMEM = "AHTxx";

usermods/Animated_Staircase/Animated_Staircase.h

@@ -25,6 +25,7 @@ class Animated_Staircase : public Usermod {
     bool useUSSensorBottom         = false; // using PIR or UltraSound sensor?
     unsigned int topMaxDist        = 50;    // default maximum measured distance in cm, top
     unsigned int bottomMaxDist     = 50;    // default maximum measured distance in cm, bottom
+    bool togglePower               = false; // toggle power on/off with staircase on/off
 
     /* runtime variables */
     bool initDone = false;
@@ -90,7 +91,8 @@ class Animated_Staircase : public Usermod {
     static const char _bottomEcho_pin[];
     static const char _topEchoCm[];
     static const char _bottomEchoCm[];
-    
+    static const char _togglePower[];
+
     void publishMqtt(bool bottom, const char* state) {
 #ifndef WLED_DISABLE_MQTT
       //Check if MQTT Connected, otherwise it will crash the 8266
@@ -131,7 +133,7 @@ class Animated_Staircase : public Usermod {
     *            received within this time, an object is detected
     *            and the function will return true.
     *
-    * The speed of sound is 343 meters per second at 20 degress Celcius.
+    * The speed of sound is 343 meters per second at 20 degrees Celsius.
     * Since the sound has to travel back and forth, the detection
     * distance for the sensor in cm is (0.0343 * maxTimeUs) / 2.
     *
@@ -196,6 +198,7 @@ class Animated_Staircase : public Usermod {
           if (on) {
             lastSensor = topSensorRead;
           } else {
+            if (togglePower && onIndex == offIndex && offMode) toggleOnOff(); // toggle power on if off
             // If the bottom sensor triggered, we need to swipe up, ON
             swipe = bottomSensorRead;
 
@@ -249,11 +252,14 @@ class Animated_Staircase : public Usermod {
             offIndex = MAX(onIndex, offIndex - 1);
           }
         }
-        if (oldOn != onIndex || oldOff != offIndex) updateSegments(); // reduce the number of updates to necessary ones
+        if (oldOn != onIndex || oldOff != offIndex) {
+          updateSegments(); // reduce the number of updates to necessary ones
+          if (togglePower && onIndex == offIndex && !offMode && !on) toggleOnOff();  // toggle power off for all segments off
+        }
       }
     }
 
-    // send sesnor values to JSON API
+    // send sensor values to JSON API
     void writeSensorsToJson(JsonObject& staircase) {
       staircase[F("top-sensor")]    = topSensorRead;
       staircase[F("bottom-sensor")] = bottomSensorRead;
@@ -291,10 +297,11 @@ class Animated_Staircase : public Usermod {
         offIndex = maxSegmentId = strip.getLastActiveSegmentId() + 1;
 
         // shorten the strip transition time to be equal or shorter than segment delay
-        transitionDelayTemp = transitionDelay = segment_delay_ms;
-        strip.setTransition(segment_delay_ms/100);
+        transitionDelay = segment_delay_ms;
+        strip.setTransition(segment_delay_ms);
         strip.trigger();
       } else {
+        if (togglePower && !on && offMode) toggleOnOff(); // toggle power on if off
         // Restore segment options
         for (int i = 0; i <= strip.getLastActiveSegmentId(); i++) {
           Segment &seg = strip.getSegment(i);
@@ -302,7 +309,7 @@ class Animated_Staircase : public Usermod {
           seg.setOption(SEG_OPTION_ON, true);
         }
         strip.trigger();  // force strip update
-        stateChanged = true;  // inform external dvices/UI of change
+        stateChanged = true;  // inform external devices/UI of change
         colorUpdated(CALL_MODE_DIRECT_CHANGE);
         DEBUG_PRINTLN(F("Animated Staircase disabled."));
       }
@@ -444,6 +451,7 @@ class Animated_Staircase : public Usermod {
       staircase[FPSTR(_bottomEcho_pin)]            = useUSSensorBottom ? bottomEchoPin : -1;
       staircase[FPSTR(_topEchoCm)]                 = topMaxDist;
       staircase[FPSTR(_bottomEchoCm)]              = bottomMaxDist;
+      staircase[FPSTR(_togglePower)]               = togglePower;
       DEBUG_PRINTLN(F("Staircase config saved."));
     }
 
@@ -484,10 +492,12 @@ class Animated_Staircase : public Usermod {
       bottomEchoPin         = top[FPSTR(_bottomEcho_pin)] | bottomEchoPin;
 
       topMaxDist    = top[FPSTR(_topEchoCm)] | topMaxDist;
-      topMaxDist    = min(150,max(30,(int)topMaxDist));     // max distnace ~1.5m (a lag of 9ms may be expected)
+      topMaxDist    = min(150,max(30,(int)topMaxDist));     // max distance ~1.5m (a lag of 9ms may be expected)
       bottomMaxDist = top[FPSTR(_bottomEchoCm)] | bottomMaxDist;
       bottomMaxDist = min(150,max(30,(int)bottomMaxDist));  // max distance ~1.5m (a lag of 9ms may be expected)
 
+      togglePower = top[FPSTR(_togglePower)] | togglePower;  // staircase toggles power on/off
+
       DEBUG_PRINT(FPSTR(_name));
       if (!initDone) {
         // first run: reading from cfg.json
@@ -511,7 +521,7 @@ class Animated_Staircase : public Usermod {
         if (changed) setup();
       }
       // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
-      return true;
+      return !top[FPSTR(_togglePower)].isNull();
     }
 
     /*
@@ -551,3 +561,4 @@ const char Animated_Staircase::_bottomPIRorTrigger_pin[]    PROGMEM = "bottomPIR
 const char Animated_Staircase::_bottomEcho_pin[]            PROGMEM = "bottomEcho_pin";
 const char Animated_Staircase::_topEchoCm[]                 PROGMEM = "top-dist-cm";
 const char Animated_Staircase::_bottomEchoCm[]              PROGMEM = "bottom-dist-cm";
+const char Animated_Staircase::_togglePower[]               PROGMEM = "toggle-on-off";

usermods/Animated_Staircase/README.md

@@ -11,7 +11,7 @@ The Animated Staircase can be controlled by the WLED API. Change settings such a
 speed, on/off time and distance by sending an HTTP request, see below.
 
 ## WLED integration
-To include this usermod in your WLED setup, you have to be able to [compile WLED from source](https://github.com/Aircoookie/WLED/wiki/Compiling-WLED).
+To include this usermod in your WLED setup, you have to be able to [compile WLED from source](https://kno.wled.ge/advanced/compiling-wled/).
 
 Before compiling, you have to make the following modifications:
 
@@ -38,7 +38,7 @@ Maximum distance for ultrasonic sensor can be configured as the time needed for
 You _may_ need to use 10k pull-down resistors on the selected PIR pins, depending on the sensor.
 
 ## WLED configuration
-1. In the WLED UI, confgure a segment for each step. The lowest step of the stairs is the 
+1. In the WLED UI, configure a segment for each step. The lowest step of the stairs is the 
    lowest segment id. 
 2. Save your segments into a preset. 
 3. Ideally, add the preset in the config > LED setup menu to the "apply 
@@ -91,7 +91,7 @@ To enable the usermod again, use `"enabled":true`.
 Alternatively you can use _Usermod_ Settings page where you can change other parameters as well.
 
 ### Changing animation parameters and detection range of the ultrasonic HC-SR04 sensor
-Using _Usermod_ Settings page you can define different usermod parameters, includng sensor pins, delay between segment activation etc.
+Using _Usermod_ Settings page you can define different usermod parameters, including sensor pins, delay between segment activation etc.
 
 When an ultrasonic sensor is enabled you can enter maximum detection distance in centimeters separately for top and bottom sensors.
 

usermods/BH1750_v2/readme.md

@@ -9,7 +9,7 @@ The luminance is displayed in both the Info section of the web UI, as well as pu
   - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
-## Compiliation
+## Compilation
 
 To enable, compile with `USERMOD_BH1750` defined  (e.g. in `platformio_override.ini`)
 ```ini

usermods/BH1750_v2/usermod_bh1750.h

@@ -25,7 +25,7 @@
 #define USERMOD_BH1750_FIRST_MEASUREMENT_AT 10000
 #endif
 
-// only report if differance grater than offset value
+// only report if difference grater than offset value
 #ifndef USERMOD_BH1750_OFFSET_VALUE
 #define USERMOD_BH1750_OFFSET_VALUE 1
 #endif
@@ -59,7 +59,7 @@ private:
   bool sensorFound = false;
 
   // Home Assistant and MQTT  
-  String mqttLuminanceTopic = F("");
+  String mqttLuminanceTopic;
   bool mqttInitialized = false;
   bool HomeAssistantDiscovery = true; // Publish Home Assistant Discovery messages
 
@@ -86,7 +86,7 @@ private:
     
     StaticJsonDocument<600> doc;
     
-    doc[F("name")] = String(serverDescription) + F(" ") + name;
+    doc[F("name")] = String(serverDescription) + " " + name;
     doc[F("state_topic")] = topic;
     doc[F("unique_id")] = String(mqttClientID) + name;
     if (unitOfMeasurement != "")
@@ -98,8 +98,8 @@ private:
     JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
     device[F("name")] = serverDescription;
     device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
-    device[F("manufacturer")] = F("WLED");
-    device[F("model")] = F("FOSS");
+    device[F("manufacturer")] = F(WLED_BRAND);
+    device[F("model")] = F(WLED_PRODUCT_NAME);
     device[F("sw_version")] = versionString;
 
     String temp;

usermods/BME280_v2/README.md

@@ -7,6 +7,7 @@ This Usermod is designed to read a `BME280` or `BMP280` sensor and output the fo
 - Dew Point (`BME280` only)
 
 Configuration is performed via the Usermod menu.  There are no parameters to set in code!  The following settings can be configured in the Usermod Menu:
+- The i2c address in decimal. Set it to either 118 (0x76, the default) or 119 (0x77).
 - Temperature Decimals (number of decimal places to output)
 - Humidity Decimals
 - Pressure Decimals

usermods/BME280_v2/usermod_bme280.h

@@ -24,6 +24,7 @@ private:
   uint8_t  PressureDecimals = 0;    // Number of decimal places in published pressure values
   uint16_t TemperatureInterval = 5; // Interval to measure temperature (and humidity, dew point if available) in seconds
   uint16_t PressureInterval = 300;  // Interval to measure pressure in seconds
+  BME280I2C::I2CAddr I2CAddress = BME280I2C::I2CAddr_0x76;  // i2c address, defaults to 0x76
   bool PublishAlways = false;             // Publish values even when they have not changed
   bool UseCelsius = true;                 // Use Celsius for Reporting
   bool HomeAssistantDiscovery = false;    // Publish Home Assistant Device Information
@@ -31,24 +32,11 @@ private:
 
   // set the default pins based on the architecture, these get overridden by Usermod menu settings
   #ifdef ESP8266
-    //uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+    //uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
   #endif
   bool initDone = false;
 
-  // BME280 sensor settings
-  BME280I2C::Settings settings{
-      BME280::OSR_X16, // Temperature oversampling x16
-      BME280::OSR_X16, // Humidity oversampling x16
-      BME280::OSR_X16, // Pressure oversampling x16
-      // Defaults
-      BME280::Mode_Forced,
-      BME280::StandbyTime_1000ms,
-      BME280::Filter_Off,
-      BME280::SpiEnable_False,
-      BME280I2C::I2CAddr_0x76 // I2C address. I2C specific. Default 0x76
-  };
-
-  BME280I2C bme{settings};
+  BME280I2C bme;
 
   uint8_t sensorType;
 
@@ -78,7 +66,7 @@ private:
   static const char _name[];
   static const char _enabled[];
 
-  // Read the BME280/BMP280 Sensor (which one runs depends on whether Celsius or Farenheit being set in Usermod Menu)
+  // Read the BME280/BMP280 Sensor (which one runs depends on whether Celsius or Fahrenheit being set in Usermod Menu)
   void UpdateBME280Data(int SensorType)
   {
     float _temperature, _humidity, _pressure;
@@ -160,8 +148,8 @@ private:
     JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
     device[F("name")] = serverDescription;
     device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
-    device[F("manufacturer")] = F("WLED");
-    device[F("model")] = F("FOSS");
+    device[F("manufacturer")] = F(WLED_BRAND);
+    device[F("model")] = F(WLED_PRODUCT_NAME);
     device[F("sw_version")] = versionString;
 
     String temp;
@@ -181,34 +169,52 @@ private:
       }
     }
 
+    void initializeBmeComms()
+    {
+      BME280I2C::Settings settings{
+            BME280::OSR_X16,    // Temperature oversampling x16
+            BME280::OSR_X16,    // Humidity oversampling x16
+            BME280::OSR_X16,    // Pressure oversampling x16
+            BME280::Mode_Forced,
+            BME280::StandbyTime_1000ms,
+            BME280::Filter_Off,
+            BME280::SpiEnable_False,
+            I2CAddress
+        };
+
+      bme.setSettings(settings);
+      
+      if (!bme.begin())
+      {
+        sensorType = 0;
+        DEBUG_PRINTLN(F("Could not find BME280 I2C sensor!"));
+      }
+      else
+      {
+        switch (bme.chipModel())
+        {
+        case BME280::ChipModel_BME280:
+          sensorType = 1;
+          DEBUG_PRINTLN(F("Found BME280 sensor! Success."));
+          break;
+        case BME280::ChipModel_BMP280:
+          sensorType = 2;
+          DEBUG_PRINTLN(F("Found BMP280 sensor! No Humidity available."));
+          break;
+        default:
+          sensorType = 0;
+          DEBUG_PRINTLN(F("Found UNKNOWN sensor! Error!"));
+        }
+      }
+    }
+
 public:
   void setup()
   {
     if (i2c_scl<0 || i2c_sda<0) { enabled = false; sensorType = 0; return; }
     
-    if (!bme.begin())
-    {
-      sensorType = 0;
-      DEBUG_PRINTLN(F("Could not find BME280 I2C sensor!"));
-    }
-    else
-    {
-      switch (bme.chipModel())
-      {
-      case BME280::ChipModel_BME280:
-        sensorType = 1;
-        DEBUG_PRINTLN(F("Found BME280 sensor! Success."));
-        break;
-      case BME280::ChipModel_BMP280:
-        sensorType = 2;
-        DEBUG_PRINTLN(F("Found BMP280 sensor! No Humidity available."));
-        break;
-      default:
-        sensorType = 0;
-        DEBUG_PRINTLN(F("Found UNKNOWN sensor! Error!"));
-      }
-    }
-    initDone=true;
+    initializeBmeComms();
+    initDone = true;
   }
 
   void loop()
@@ -365,12 +371,11 @@ public:
     }
     else if (sensorType==2) //BMP280
     {
-      
       JsonArray temperature_json = user.createNestedArray(F("Temperature"));
       JsonArray pressure_json = user.createNestedArray(F("Pressure"));
-      temperature_json.add(roundf(sensorTemperature * powf(10, TemperatureDecimals)));
+      temperature_json.add(roundf(sensorTemperature * powf(10, TemperatureDecimals)) / powf(10, TemperatureDecimals));
       temperature_json.add(tempScale);
-      pressure_json.add(roundf(sensorPressure * powf(10, PressureDecimals)));
+      pressure_json.add(roundf(sensorPressure * powf(10, PressureDecimals)) / powf(10, PressureDecimals));
       pressure_json.add(F("hPa"));
     }
     else if (sensorType==1) //BME280
@@ -382,9 +387,9 @@ public:
       JsonArray dewpoint_json = user.createNestedArray(F("Dew Point"));
       temperature_json.add(roundf(sensorTemperature * powf(10, TemperatureDecimals)) / powf(10, TemperatureDecimals));
       temperature_json.add(tempScale);
-      humidity_json.add(roundf(sensorHumidity * powf(10, HumidityDecimals)));
+      humidity_json.add(roundf(sensorHumidity * powf(10, HumidityDecimals)) / powf(10, HumidityDecimals));
       humidity_json.add(F("%"));
-      pressure_json.add(roundf(sensorPressure * powf(10, PressureDecimals)));
+      pressure_json.add(roundf(sensorPressure * powf(10, PressureDecimals)) / powf(10, PressureDecimals));
       pressure_json.add(F("hPa"));
       heatindex_json.add(roundf(sensorHeatIndex * powf(10, TemperatureDecimals)) / powf(10, TemperatureDecimals));
       heatindex_json.add(tempScale);
@@ -399,6 +404,7 @@ public:
   {
     JsonObject top = root.createNestedObject(FPSTR(_name));
     top[FPSTR(_enabled)] = enabled;
+    top[F("I2CAddress")] = static_cast<uint8_t>(I2CAddress);
     top[F("TemperatureDecimals")] = TemperatureDecimals;
     top[F("HumidityDecimals")] = HumidityDecimals;
     top[F("PressureDecimals")] = PressureDecimals;
@@ -426,6 +432,10 @@ public:
 
     configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled);
     // A 3-argument getJsonValue() assigns the 3rd argument as a default value if the Json value is missing
+    uint8_t tmpI2cAddress;
+    configComplete &= getJsonValue(top[F("I2CAddress")], tmpI2cAddress, 0x76);
+    I2CAddress = static_cast<BME280I2C::I2CAddr>(tmpI2cAddress);
+
     configComplete &= getJsonValue(top[F("TemperatureDecimals")], TemperatureDecimals, 1);
     configComplete &= getJsonValue(top[F("HumidityDecimals")], HumidityDecimals, 0);
     configComplete &= getJsonValue(top[F("PressureDecimals")], PressureDecimals, 0);
@@ -440,8 +450,23 @@ public:
       // first run: reading from cfg.json
       DEBUG_PRINTLN(F(" config loaded."));
     } else {
-      DEBUG_PRINTLN(F(" config (re)loaded."));
       // changing parameters from settings page
+      DEBUG_PRINTLN(F(" config (re)loaded."));
+
+      // Reset all known values
+      sensorType = 0;
+      sensorTemperature = 0;
+      sensorHumidity = 0;
+      sensorHeatIndex = 0;
+      sensorDewPoint = 0;
+      sensorPressure = 0;
+      lastTemperature = 0;
+      lastHumidity = 0;
+      lastHeatIndex = 0;
+      lastDewPoint = 0;
+      lastPressure = 0;
+      
+      initializeBmeComms();
     }
 
     return configComplete;

usermods/BME68X_v2/README.md

@@ -0,0 +1,152 @@
+# Usermod BME68X
+This usermod was developed for a BME680/BME68X sensor. The BME68X is not compatible with the BME280/BMP280 chip. It has its own library. The original 'BSEC Software Library' from Bosch was used to develop the code. The measured values are displayed on the WLED info page. 
+
+<p align="center"><img src="pics/pic1.png" style="width:60%;"></p>
+
+In addition, the values are published on MQTT if this is active. The topic used for this is: 'wled/[MQTT Client ID]'. The Client ID is set in the WLED MQTT settings.
+<p align="center"><img src="pics/pic2.png"></p>
+
+If you use HomeAssistance discovery, the device tree for HomeAssistance is created.  This is published under the topic 'homeassistant/sensor/[MQTT Client ID]' via MQTT.
+<p align="center"><img src="pics/pic3.png"></p>
+
+A device with the following sensors appears in HomeAssistant. Please note that MQTT must be activated in HomeAssistant.
+<p align="center"><img src="pics/pic4.png" style="width:60%;"></p>
+
+
+## Features
+Raw sensor types
+
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Temperature	+/- 1.0		°C/°F		-40 to 85 °C
+	Humidity	+/- 3 		%		0 to 100 %
+	Pressure	+/- 1 		hPa		300 to 1100 hPa
+	Gas Resistance			Ohm
+
+The BSEC Library calculates the following values via the gas resistance
+
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	IAQ 						value between 0 and 500
+	Static IAQ 					same as IAQ but for permanently installed devices
+	CO2 				PPM
+	VOC 				PPM
+	Gas-Percentage 			%
+
+
+In addition the usermod calculates
+
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Absolute humidity	 	g/m³
+	Dew point 			°C/°F
+
+### IAQ (Indoor Air Quality)
+The IAQ is divided into the following value groups. 
+<p align="center"><img src="pics/pic5.png"></p>
+
+For more detailed information, please consult the enclosed Bosch product description (BME680.pdf).
+
+
+## Calibration of the device
+
+The gas sensor of the BME68X must be calibrated. This differs from the BME280, which does not require any calibration. 
+There is a range of additional information for this, which the driver also provides. These values can be found in HomeAssistant under Diagnostics.
+
+- **STABILIZATION_STATUS**: Gas sensor stabilization status [boolean] Indicates initial stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1).
+- **RUN_IN_STATUS**: 	Gas sensor run-in status [boolean] Indicates power-on stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1)
+
+Furthermore, all GAS based values have their own accuracy value. These have the following meaning: 
+
+- **Accuracy = 0** 	means the sensor is being stabilized (this can take a while on the first run) 
+- **Accuracy = 1**	means that the previous measured values show too few differences and cannot be used for calibration. If the sensor is at accuracy 1 for too long, you must ensure that the ambient air is chaning. Opening the windows is fine. Or sometimes it is sufficient to breathe on the sensor for approx. 5 minutes. 
+- **Accuracy = 2**	means the sensor is currently calibrating.
+- **Accuracy = 3**	means that the sensor has been successfully calibrated. Once accuracy 3 is reached, the calibration data is automatically written to the file system. This calibration data will be used again at the next start and will speed up the calibration.
+
+The IAQ index is therefore only meaningful if IAQ Accuracy = 3. In addition to the value for IAQ, BSEC also provides us with CO2 and VOC equivalent values. When using the sensor, the calibration value should also always be read out and displayed or transmitted.
+
+Reasonably reliable values are therefore only achieved when accuracy displays the value 3.
+
+
+
+## Settings
+The settings of the usermods are set in the usermod section of wled. 
+<p align="center"><img src="pics/pic6.png"></p>
+
+The possible settings are
+
+- **Enable:**			Enables / disables the usermod
+- **I2C address:**		I2C address of the sensor. You can choose between 0X77 & 0X76. The default is 0x77.
+- **Interval:**			Specifies the interval of seconds at which the usermod should be executed. The default is every second. 
+- **Pub Chages Only:**		If this item is active, the values are only published if they have changed since the last publication. 
+- **Pub Accuracy:**		The Accuracy values associated with the gas values are also published. 
+- **Pub Calib State:**		If this item is active, STABILIZATION_STATUS& RUN_IN_STATUS are also published. 
+- **Temp Scale:**		Here you can choose between °C and °F.
+- **Temp Offset:**		The temperature offset is always set in °C. It must be converted for Fahrenheit. 
+- **HA Discovery:**		If this item is active, the HomeAssistant sensor tree is created. 
+- **Pause While WLED Active:**	If WLED has many LEDs to calculate, the computing power may no longer be sufficient to calculate the LEDs and read the sensor data. The LEDs then hang for a few microseconds, which can be seen. If this point is active, no sensor data is fetched as long as WLED is running.
+- **Del Calibration Hist:**	If a check mark is set here, the calibration file saved in the file system is deleted when the settings are saved. 
+
+### Sensors
+Applies to all sensors. The number of decimal places is set here. If the sensor is set to -1, it will no longer be published. In addition, the IAQ values can be activated here in verbal form. 
+
+It is recommended to use the Static IAQ for the IAQ values. This is recommended by Bosch for statically placed devices.
+
+## Output
+
+Data is published over MQTT - make sure you've enabled the MQTT sync interface.
+
+In addition to outputting via MQTT, you can read the values from the Info Screen on the dashboard page of the device's web interface.
+
+Methods also exist to read the read/calculated values from other WLED modules through code.
+- getTemperature();	The scale °C/°F is depended to the settings
+- getHumidity();	
+- getPressure();
+- getGasResistance();
+- getAbsoluteHumidity();
+- getDewPoint();		The scale °C/°F is depended to the settings
+- getIaq();
+- getStaticIaq();
+- getCo2();
+- getVoc();
+- getGasPerc();
+- getIaqAccuracy();
+- getStaticIaqAccuracy();
+- getCo2Accuracy();
+- getVocAccuracy();
+- getGasPercAccuracy();
+- getStabStatus();
+- getRunInStatus();
+
+
+## Compiling
+
+To enable, compile with `USERMOD_BME68X` defined (e.g. in `platformio_override.ini`) and add the `BSEC Software Library` to the lib_deps.
+
+```
+[env:esp32-BME680]
+board = 		esp32dev
+platform = 		${esp32.platform}
+platform_packages = 	${esp32.platform_packages}
+lib_deps = 		${esp32.lib_deps}
+           		boschsensortec/BSEC Software Library @ ^1.8.1492      	; USERMOD: BME680                                          
+build_unflags = 	${common.build_unflags}
+build_flags = 		${common.build_flags_esp32} 
+              		-D USERMOD_BME68X                      			; USERMOD: BME680
+```
+
+## Revision History
+### Version 1.0.0
+- First version of the BME68X_v user module
+### Version 1.0.1
+- Rebased to WELD Version 0.15
+- Reworked some default settings
+- A problem with the default settings has been fixed
+
+## Known problems
+- MQTT goes online at device start. Shortly afterwards it goes offline and takes quite a while until it goes online again. The problem does not come from this user module, but from the WLED core.
+- If you save the settings often, WLED can get stuck.
+- If many LEDS are connected to WLED, reading the sensor can cause a small but noticeable hang. The "Pause While WLED Active" option was introduced as a workaround.
+
+<div><img src="pics/GeoGab.svg" width="20%"/> </div>
+Gabriel Sieben (gsieben@geogab.net)

usermods/BME68X_v2/pics/GeoGab.svg

@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:osb="http://www.openswatchbook.org/uri/2009/osb"
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xml:space="preserve"
+   style="enable-background:new 0 0 595.28 127.56;"
+   viewBox="0 0 600 135"
+   y="0px"
+   x="0px"
+   id="Layer_1"
+   version="1.1"><metadata
+   id="metadata2372"><rdf:RDF><cc:Work
+       rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+         rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
+   id="defs2370"><linearGradient
+     osb:paint="solid"
+     id="linearGradient3877"><stop
+       id="stop3875"
+       offset="0"
+       style="stop-color:#808285;stop-opacity:1;" /></linearGradient><clipPath
+     id="clipPath2379"
+     clipPathUnits="userSpaceOnUse"><g
+       style="fill:#808285;fill-opacity:1;fill-rule:nonzero;stroke:#230065;stroke-width:0;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:0.99607843"
+       id="use2381"><path
+         style="fill:#808285;fill-opacity:1;fill-rule:nonzero;stroke:#230065;stroke-width:0;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:0.99607843"
+         class="st0"
+         d="m 588.34,94.29 c 0,13.28 -10.77,24.04 -24.04,24.04 H 31.38 C 18.1,118.33 7.34,107.57 7.34,94.29 V 32.38 C 7.34,19.1 18.1,8.34 31.38,8.34 h 532.91 c 13.28,0 24.04,10.76 24.04,24.04 V 94.29 Z M 159.44,69.66 c 0,17.15 11.68,19.07 21.89,19.07 h 14.23 c 14.6,0 23.44,-3.2 23.44,-13.87 v -0.91 h -7.84 c -0.45,7.11 -4.47,8.39 -14.32,8.39 h -10.76 c -13.68,0 -18.79,-2.74 -18.79,-13.32 V 66.65 H 219 V 60.9 C 219,44.3 208.88,40.74 194.83,40.74 h -12.59 c -11.12,0 -22.8,1.92 -22.8,18.79 z m 51.72,-9.95 h -43.87 c 0.73,-10.58 3.65,-12.59 16.05,-12.59 h 11.49 c 12.77,0 16.33,4.74 16.33,9.49 z m 18.62,10.13 c 0,15.33 10.86,18.88 25.73,18.88 h 11.22 c 14.87,0 25.72,-3.56 25.72,-18.88 V 59.62 c 0,-15.32 -10.85,-18.88 -25.72,-18.88 h -11.22 c -14.87,0 -25.73,3.56 -25.73,18.88 z m 54.82,-0.46 c 0,10.86 -6.38,12.95 -15.51,12.95 h -15.96 c -9.12,0 -15.51,-2.09 -15.51,-12.95 v -9.31 c 0,-10.85 6.39,-12.95 15.51,-12.95 h 15.96 c 9.12,0 15.51,2.1 15.51,12.95 z m 173.79,18.61 v -31.2 c 0,-13.87 -9.85,-16.06 -24.45,-16.06 h -12.41 c -14.05,0 -19.43,3.47 -19.43,11.95 v 2.28 h 7.84 v -1.64 c 0,-3.83 1.92,-6.2 11.77,-6.2 h 11.49 c 12.04,0 17.33,1.09 17.33,9.49 v 8.76 h -0.18 c -2.74,-4.47 -6.39,-5.56 -16.6,-5.56 H 421.16 C 407.48,59.81 400,61.09 400,71.67 v 3.1 c 0,8.76 3.1,13.96 14.96,13.96 h 18.79 z m -7.84,-12.5 c 0,5.84 -5.47,6.84 -19.7,6.84 h -10.4 c -10.76,0 -12.59,-2.19 -12.59,-7.39 v -1.46 c 0,-5.84 2.83,-7.3 12.95,-7.3 h 12.04 c 12.04,0 17.7,0.82 17.7,7.2 z M 73.6,66.69 h 10.88 l 5.03,0.01 h 48.67 v 2.41 c 0,9.12 -5.47,12.23 -14.41,12.23 H 88.83 c -8.58,0 -15.51,-2.55 -15.51,-14.05 v -0.35 -0.26 z m -9.16,-0.01 c 0,0.06 0,0.14 0,0.2 0.67,14.68 6.68,21.76 23.47,21.76 h 36.85 c 16.51,0 22.35,-6.39 22.35,-24.36 V 59.4 H 89.51 L 85.39,59.39 H 73.32 v -0.01 -16.9 c 0,-11.49 6.93,-14.05 15.51,-14.05 H 112 c 22.07,0 25.81,0.91 25.81,13.23 h 8.39 v -2.37 c 0,-15.23 -12.68,-18.15 -24.54,-18.15 H 87.92 c -17.88,0 -23.53,8.03 -23.53,24.72 V 59.39 L 64.38,59.4 H 44.6 c -11.86,0 -24.54,2.92 -24.54,18.15 v 2.37 5.02 2.37 c 0,15.24 12.68,18.16 24.54,18.16 h 40.79 432.59 34.03 c 17.88,0 23.54,-8.03 23.54,-24.72 V 45.88 c 0,-16.69 -5.65,-24.72 -23.54,-24.72 l -0.16,-0.02 h -223 c -17.88,0 -23.53,8.03 -23.53,24.72 v 18.06 c 0,16.69 5.65,24.72 23.53,24.72 h 36.85 c 16.51,0 22.35,-6.39 22.35,-24.36 V 59.4 h -42.78 v 7.3 h 33.84 v 2.41 c 0,9.12 -5.47,12.23 -14.41,12.23 h -34.94 c -8.58,0 -15.5,-2.55 -15.5,-14.05 V 42.48 c 0,-11.49 6.93,-14.05 15.5,-14.05 l 142.5,0.02 v 61.24 l 24.35,0.73 h 10.95 c 14.23,0 24.18,-3.56 24.18,-19.61 V 62.6 c 0,-14.87 -5.75,-20.16 -24.63,-20.16 h -11.95 -14.88 -0.17 l -0.02,-14.01 h 71.75 l -0.75,0.02 c 8.58,0 15.51,2.55 15.51,14.04 v 41.62 c 0,11.49 -6.93,14.05 -15.51,14.05 H 518.97 86.87 54.27 c -22.08,0 -25.81,-0.91 -25.81,-13.23 v -5.02 c 0,-12.31 3.74,-13.23 25.81,-13.23 h 9.84 z m 459.45,4.04 c 0,9.03 -2.83,13.32 -15.6,13.32 h -12.77 c -11.67,0 -15.42,-4.93 -15.42,-13.41 v -8.85 c 0,-11.13 6.48,-12.95 17.06,-12.95 h 10.58 c 10.76,0 16.14,2.01 16.14,12.77 v 9.12 z"
+         id="path3935" /><path
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#230065;stroke-width:0;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:0.99607843"
+         class="st0"
+         d="m 611.07375,-48.387188 c 0,13.28 -10.77,24.039999 -24.04,24.039999 H 54.113747 c -13.27999,0 -24.04,-10.76 -24.04,-24.039999 v -61.910002 c 0,-13.28 10.76001,-24.04 24.04,-24.04 H 587.02375 c 13.28,0 24.04,10.76 24.04,24.04 v 61.910002 z"
+         id="path3937" /></g></clipPath><clipPath
+     id="clipPath2398"
+     clipPathUnits="userSpaceOnUse"><g
+       id="use2400"
+       style="fill:#268298;fill-opacity:1"><g
+         id="g3959"
+         clip-path="url(#clipPath2407)"
+         style="fill:#268298;fill-opacity:1"><g
+           id="g3957"
+           style="fill:#268298;fill-opacity:1"><rect
+             style="opacity:1;fill:#268298;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+             id="rect3955"
+             width="350.98587"
+             height="147.57361"
+             x="95.224861"
+             y="-97.290329" /></g></g></g></clipPath><clipPath
+     id="clipPath2407"
+     clipPathUnits="userSpaceOnUse"><g
+       id="use2409"
+       style="fill:#268298;fill-opacity:1"><rect
+         style="opacity:1;fill:#268298;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="rect3963"
+         width="350.98587"
+         height="147.57361"
+         x="95.224861"
+         y="-97.290329" /></g></clipPath></defs>
+<style
+   id="style2363"
+   type="text/css">
+	.st0{fill:#808285;}
+</style>
+<path
+   style="opacity:1;fill:#ffffff;fill-opacity:0.9859813;fill-rule:nonzero;stroke:#5c7823;stroke-width:0;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:0.99607843"
+   class="st0"
+   d="M 600,103.51782 C 600,116.79902 588.8778,127.56 575.17384,127.56 H 24.826163 C 11.111876,127.56 5.1635108e-7,116.79902 5.1635108e-7,103.51782 V 41.602186 C 5.1635108e-7,28.320979 11.111876,17.560001 24.826163,17.560001 H 575.16351 c 13.71429,0 24.82616,10.760978 24.82616,24.042185 v 61.915634 z"
+   id="path2365-0" /><path
+   style="fill:#808285;fill-opacity:1;fill-rule:nonzero;stroke:#230065;stroke-width:0;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:0.99607843"
+   class="st0"
+   d="M 600,103.51782 C 600,116.79902 588.8778,127.56 575.17384,127.56 H 24.826162 C 11.111877,127.56 5.1635111e-7,116.79902 5.1635111e-7,103.51782 V 41.602187 C 5.1635111e-7,28.320977 11.111876,17.559997 24.826162,17.559997 H 575.16351 c 13.71429,0 24.82616,10.76098 24.82616,24.04219 V 103.51782 Z M 157.07401,78.885567 c 0,17.15156 12.06196,19.07173 22.60585,19.07173 h 14.69535 c 15.07745,0 24.20654,-3.20029 24.20654,-13.87125 v -0.91009 h -8.09638 c -0.46472,7.11065 -4.61618,8.39076 -14.7883,8.39076 h -11.11188 c -14.12736,0 -19.40447,-2.74024 -19.40447,-13.3212 v -2.37022 h 53.40103 v -5.75052 c 0,-16.60151 -10.45094,-20.16183 -24.96041,-20.16183 h -13.00172 c -11.48365,0 -23.54561,1.92017 -23.54561,18.79171 z m 53.41136,-9.9509 h -45.30465 c 0.75387,-10.58096 3.76936,-12.59114 16.57487,-12.59114 h 11.86575 c 13.18761,0 16.86403,4.74043 16.86403,9.49086 z m 19.22891,10.13092 c 0,15.33139 11.21515,18.88171 26.57143,18.88171 h 11.58692 c 15.35629,0 26.56111,-3.56032 26.56111,-18.88171 v -10.22093 c 0,-15.32139 -11.20482,-18.88171 -26.56111,-18.88171 h -11.58692 c -15.35628,0 -26.57143,3.56032 -26.57143,18.88171 z m 56.61275,-0.46004 c 0,10.86098 -6.58865,12.95117 -16.01722,12.95117 h -16.48193 c -9.41825,0 -16.01721,-2.09019 -16.01721,-12.95117 v -9.31085 c 0,-10.85098 6.59896,-12.95117 16.01721,-12.95117 h 16.48193 c 9.41824,0 16.01722,2.10019 16.01722,12.95117 z m 179.47332,18.61169 v -31.20283 c 0,-13.87126 -10.17212,-16.06146 -25.24957,-16.06146 h -12.81584 c -14.50946,0 -20.0654,3.47031 -20.0654,11.95108 v 2.28021 h 8.09638 v -1.64015 c 0,-3.83035 1.98279,-6.20056 12.15491,-6.20056 h 11.86575 c 12.43373,0 17.89673,1.0901 17.89673,9.49086 v 8.7608 h -0.18589 c -2.8296,-4.47041 -6.59897,-5.56051 -17.14286,-5.56051 h -13.00172 c -14.12736,0 -21.85198,1.28012 -21.85198,11.86108 v 3.10028 c 0,8.76079 3.20138,13.96126 15.44923,13.96126 h 19.40447 z m -8.09639,-12.50114 c 0,5.84053 -5.64888,6.84062 -20.34423,6.84062 h -10.74011 c -11.11187,0 -13.00172,-2.19019 -13.00172,-7.39067 v -1.46013 c 0,-5.84053 2.92255,-7.30066 13.3735,-7.30066 h 12.43373 c 12.43374,0 18.27883,0.82007 18.27883,7.20065 z m -389.27711,-8.8008 h 11.2358 l 5.194492,0.01 h 50.261618 v 2.41021 c 0,9.12083 -5.64888,12.23111 -14.88124,12.23111 H 84.154905 c -8.860585,0 -16.017212,-2.55023 -16.017212,-14.05127 v -0.35003 -0.26003 z m -9.459552,-0.01 c 0,0.06 0,0.14002 0,0.20002 0.69191,14.68133 6.898451,21.76198 24.237521,21.76198 h 38.055071 c 17.04992,0 23.0809,-6.39058 23.0809,-24.36221 v -4.88045 H 84.857142 l -4.254733,-0.01 H 68.137693 v -0.01 -16.90153 c 0,-11.49104 7.156627,-14.05129 16.017212,-14.05129 h 23.927705 c 22.79174,0 26.65405,0.91009 26.65405,13.23121 h 8.66437 v -2.37021 c 0,-15.23139 -13.09466,-18.15166 -25.34251,-18.15166 H 83.215146 c -18.464717,0 -24.299483,8.03073 -24.299483,24.72226 v 13.53122 l -0.01033,0.01 h -20.42685 c -12.247849,0 -25.342513,2.92027 -25.342513,18.15165 v 2.37022 5.02045 2.37022 c 0,15.241393 13.094664,18.161653 25.342513,18.161653 h 42.123923 446.736664 35.14286 c 18.46471,0 24.30981,-8.03073 24.30981,-24.722253 v -34.87316 c 0,-16.69153 -5.83477,-24.72226 -24.30981,-24.72226 l -0.16523,-0.02 H 332.0241 c -18.46471,0 -24.29948,8.03073 -24.29948,24.72226 v 18.06163 c 0,16.69152 5.83477,24.72225 24.29948,24.72225 h 38.05508 c 17.04991,0 23.08089,-6.39058 23.08089,-24.36221 v -4.88045 h -44.179 v 7.30067 h 34.94664 v 2.41021 c 0,9.12083 -5.64888,12.23111 -14.88123,12.23111 h -36.08262 c -8.86059,0 -16.00688,-2.55023 -16.00688,-14.05127 v -24.81225 c 0,-11.49104 7.15662,-14.05129 16.00688,-14.05129 l 147.16007,0.02 v 61.24556 l 25.14629,0.73007 h 11.30809 c 14.69536,0 24.97074,-3.56033 24.97074,-19.61178 v -8.21075 c 0,-14.87135 -5.93803,-20.16183 -25.43545,-20.16183 h -12.34079 -15.36661 -0.17556 l -0.0207,-14.01128 h 74.09639 l -0.77453,0.02 c 8.86059,0 16.01721,2.55024 16.01721,14.04128 v 41.62378 c 0,11.491053 -7.15662,14.051283 -16.01721,14.051283 H 528.36145 82.130808 48.464716 c -22.802065,0 -26.654044,-0.91008 -26.654044,-13.231213 v -5.02046 c 0,-12.31111 3.862306,-13.2312 26.654044,-13.2312 h 10.161789 z m 474.475042,4.04037 c 0,9.03082 -2.92255,13.32121 -16.11015,13.32121 h -13.18761 c -12.05164,0 -15.92427,-4.93045 -15.92427,-13.41122 v -8.8508 c 0,-11.13101 6.69191,-12.95118 17.6179,-12.95118 h 10.92599 c 11.11188,0 16.66781,2.01019 16.66781,12.77116 v 9.12083 z"
+   id="path2365" />
+</svg>

usermods/Battery/UMBattery.h

@@ -0,0 +1,160 @@
+#ifndef UMBBattery_h
+#define UMBBattery_h
+
+#include "battery_defaults.h"
+
+/**
+ *  Battery base class
+ *  all other battery classes should inherit from this
+ */
+class UMBattery
+{
+    private:
+
+    protected:
+        float minVoltage;
+        float maxVoltage;
+        float voltage;
+        int8_t level = 100;
+        float calibration; // offset or calibration value to fine tune the calculated voltage
+        float voltageMultiplier; // ratio for the voltage divider
+        
+        float linearMapping(float v, float min, float max, float oMin = 0.0f, float oMax = 100.0f)
+        {
+            return (v-min) * (oMax-oMin) / (max-min) + oMin;
+        }
+
+    public:
+        UMBattery()
+        {
+            this->setVoltageMultiplier(USERMOD_BATTERY_VOLTAGE_MULTIPLIER);
+            this->setCalibration(USERMOD_BATTERY_CALIBRATION);
+        }
+
+        virtual void update(batteryConfig cfg)
+        {
+            if(cfg.minVoltage) this->setMinVoltage(cfg.minVoltage);
+            if(cfg.maxVoltage) this->setMaxVoltage(cfg.maxVoltage);
+            if(cfg.level) this->setLevel(cfg.level);
+            if(cfg.calibration) this->setCalibration(cfg.calibration);
+            if(cfg.voltageMultiplier) this->setVoltageMultiplier(cfg.voltageMultiplier);
+        }
+
+        /**
+         * Corresponding battery curves
+         * calculates the level in % (0-100) with given voltage and possible voltage range
+         */
+        virtual float mapVoltage(float v, float min, float max) = 0;
+        // { 
+        //     example implementation, linear mapping
+        //     return (v-min) * 100 / (max-min);
+        // };
+
+        virtual void calculateAndSetLevel(float voltage) = 0;
+
+
+
+        /*
+         *
+         * Getter and Setter
+         *
+         */
+
+        /*
+        * Get lowest configured battery voltage
+        */
+        virtual float getMinVoltage()
+        {
+            return this->minVoltage;
+        }
+
+        /*
+         * Set lowest battery voltage
+         * can't be below 0 volt
+         */
+        virtual void setMinVoltage(float voltage)
+        {
+            this->minVoltage = max(0.0f, voltage);
+        }
+
+        /*
+         * Get highest configured battery voltage
+         */
+        virtual float getMaxVoltage()
+        {
+            return this->maxVoltage;
+        }
+
+        /*
+         * Set highest battery voltage
+         * can't be below minVoltage
+         */
+        virtual void setMaxVoltage(float voltage)
+        {
+            this->maxVoltage = max(getMinVoltage()+.5f, voltage);
+        }
+
+        float getVoltage()
+        {
+            return this->voltage;
+        }
+
+        /**
+         * check if voltage is within specified voltage range, allow 10% over/under voltage
+         */
+        void setVoltage(float voltage)
+        {
+            // this->voltage = ( (voltage < this->getMinVoltage() * 0.85f) || (voltage > this->getMaxVoltage() * 1.1f) ) 
+            //     ? -1.0f 
+            //     : voltage;
+            this->voltage = voltage;
+        }
+
+        float getLevel()
+        {
+            return this->level;
+        }
+
+        void setLevel(float level)
+        {
+            this->level = constrain(level, 0.0f, 110.0f);
+        }
+
+        /*
+         * Get the configured calibration value
+         * a offset value to fine-tune the calculated voltage.
+         */
+        virtual float getCalibration()
+        {
+            return calibration;
+        }
+
+        /*
+         * Set the voltage calibration offset value
+         * a offset value to fine-tune the calculated voltage.
+         */
+        virtual void setCalibration(float offset)
+        {
+            calibration = offset;
+        }
+
+        /*
+         * Get the configured calibration value
+         * a value to set the voltage divider ratio
+         */
+        virtual float getVoltageMultiplier()
+        {
+            return voltageMultiplier;
+        }
+
+        /*
+         * Set the voltage multiplier value
+         * a value to set the voltage divider ratio.
+         */
+        virtual void setVoltageMultiplier(float multiplier)
+        {
+            voltageMultiplier = multiplier;
+        }
+};
+
+#endif

usermods/Battery/battery_defaults.h

@@ -1,3 +1,8 @@
+#ifndef UMBDefaults_h
+#define UMBDefaults_h
+
+#include "wled.h"
+
 // pin defaults
 // for the esp32 it is best to use the ADC1: GPIO32 - GPIO39
 // https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/adc.html
@@ -9,24 +14,66 @@
   #endif
 #endif
 
+// The initial delay before the first battery voltage reading after power-on.
+// This allows the voltage to stabilize before readings are taken, improving accuracy of initial reading.
+#ifndef USERMOD_BATTERY_INITIAL_DELAY
+  #define USERMOD_BATTERY_INITIAL_DELAY 10000 // (milliseconds)
+#endif
+
 // the frequency to check the battery, 30 sec
 #ifndef USERMOD_BATTERY_MEASUREMENT_INTERVAL
   #define USERMOD_BATTERY_MEASUREMENT_INTERVAL 30000
 #endif
 
-// default for 18650 battery
-// https://batterybro.com/blogs/18650-wholesale-battery-reviews/18852515-when-to-recycle-18650-batteries-and-how-to-start-a-collection-center-in-your-vape-shop
-// Discharge voltage: 2.5 volt + .1 for personal safety
-#ifndef USERMOD_BATTERY_MIN_VOLTAGE
-  #ifdef USERMOD_BATTERY_USE_LIPO
-    // LiPo "1S" Batteries should not be dischared below 3V !!
-    #define USERMOD_BATTERY_MIN_VOLTAGE 3.2f
-  #else
-    #define USERMOD_BATTERY_MIN_VOLTAGE 2.6f
-  #endif
+
+/* Default Battery Type
+ * 0 = unkown
+ * 1 = Lipo
+ * 2 = Lion
+ */
+#ifndef USERMOD_BATTERY_DEFAULT_TYPE
+  #define USERMOD_BATTERY_DEFAULT_TYPE 0
+#endif
+/*
+ *
+ *  Unkown 'Battery' defaults
+ *
+ */
+#ifndef USERMOD_BATTERY_UNKOWN_MIN_VOLTAGE
+  // Extra save defaults
+  #define USERMOD_BATTERY_UNKOWN_MIN_VOLTAGE 3.3f
+#endif
+#ifndef USERMOD_BATTERY_UNKOWN_MAX_VOLTAGE
+  #define USERMOD_BATTERY_UNKOWN_MAX_VOLTAGE 4.2f
 #endif
 
-//the default ratio for the voltage divider
+/*
+ *
+ *  Lithium polymer (Li-Po) defaults
+ *
+ */
+#ifndef USERMOD_BATTERY_LIPO_MIN_VOLTAGE
+  // LiPo "1S" Batteries should not be dischared below 3V !!
+  #define USERMOD_BATTERY_LIPO_MIN_VOLTAGE 3.2f
+#endif
+#ifndef USERMOD_BATTERY_LIPO_MAX_VOLTAGE
+  #define USERMOD_BATTERY_LIPO_MAX_VOLTAGE 4.2f
+#endif
+
+/*
+ *
+ *  Lithium-ion (Li-Ion) defaults
+ *
+ */
+#ifndef USERMOD_BATTERY_LION_MIN_VOLTAGE
+  // default for 18650 battery
+  #define USERMOD_BATTERY_LION_MIN_VOLTAGE 2.6f
+#endif
+#ifndef USERMOD_BATTERY_LION_MAX_VOLTAGE
+  #define USERMOD_BATTERY_LION_MAX_VOLTAGE 4.2f
+#endif
+
+// the default ratio for the voltage divider
 #ifndef USERMOD_BATTERY_VOLTAGE_MULTIPLIER
   #ifdef ARDUINO_ARCH_ESP32
     #define USERMOD_BATTERY_VOLTAGE_MULTIPLIER 2.0f
@@ -35,13 +82,8 @@
   #endif
 #endif
 
-#ifndef USERMOD_BATTERY_MAX_VOLTAGE
-  #define USERMOD_BATTERY_MAX_VOLTAGE 4.2f
-#endif
-
-// a common capacity for single 18650 battery cells is between 2500 and 3600 mAh
-#ifndef USERMOD_BATTERY_TOTAL_CAPACITY
-  #define USERMOD_BATTERY_TOTAL_CAPACITY 3100
+#ifndef USERMOD_BATTERY_AVERAGING_ALPHA
+  #define USERMOD_BATTERY_AVERAGING_ALPHA 0.1f
 #endif
 
 // offset or calibration value to fine tune the calculated voltage
@@ -49,11 +91,6 @@
   #define USERMOD_BATTERY_CALIBRATION 0
 #endif
 
-// calculate remaining time / the time that is left before the battery runs out of power
-// #ifndef USERMOD_BATTERY_CALCULATE_TIME_LEFT_ENABLED
-//   #define USERMOD_BATTERY_CALCULATE_TIME_LEFT_ENABLED false
-// #endif
-
 // auto-off feature
 #ifndef USERMOD_BATTERY_AUTO_OFF_ENABLED
   #define USERMOD_BATTERY_AUTO_OFF_ENABLED true
@@ -78,4 +115,26 @@
 
 #ifndef USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION
   #define USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION 5
+#endif
+
+// battery types
+typedef enum
+{
+  unknown=0,
+  lipo=1,
+  lion=2
+} batteryType;
+
+// used for initial configuration after boot 
+typedef struct bconfig_t 
+{
+  batteryType type;
+  float minVoltage;
+  float maxVoltage;
+  float voltage;          // current voltage
+  int8_t level;           // current level
+  float calibration;      // offset or calibration value to fine tune the calculated voltage
+  float voltageMultiplier;
+} batteryConfig;
+
 #endif

usermods/Battery/readme.md

@@ -6,105 +6,166 @@
 
 Enables battery level monitoring of your project.
 
-For this to work, the positive side of the (18650) battery must be connected to pin `A0` of the d1 mini/esp8266 with a 100k Ohm resistor (see [Useful Links](#useful-links)).
-
-If you have an ESP32 board, connect the positive side of the battery to ADC1 (GPIO32 - GPIO39)
-
-<p align="center">
-  <img width="500" src="assets/battery_info_screen.png">
+<p align="left">
+  <img width="700" src="assets/battery_info_screen.png">
 </p>
 
+<br>
+
 ## ⚙️ Features
 
-- 💯 Displays current battery voltage 
+- 💯 Displays current battery voltage
 - 🚥 Displays battery level
-- 🚫 Auto-off with configurable Threshold
-- 🚨 Low power indicator with many configuration posibilities
+- 🚫 Auto-off with configurable threshold
+- 🚨 Low power indicator with many configuration possibilities
+
+<br><br>
 
 ## 🎈 Installation
 
-define `USERMOD_BATTERY` in `wled00/my_config.h`
+| **Option 1** | **Option 2** |
+|--------------|--------------|
+| In `wled00/my_config.h`<br>Add the line: `#define USERMOD_BATTERY`<br><br>[Example: my_config.h](assets/installation_my_config_h.png) | In `platformio_override.ini` (or `platformio.ini`)<br>Under: `build_flags =`, add the line: `-D USERMOD_BATTERY`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |
 
-### Example wiring
+<br><br>
 
-<p align="center">
-  <img width="300" src="assets/battery_connection_schematic_01.png">
-</p>
+## 🔌 Example wiring
 
-### Define Your Options
+- (see [Useful Links](#useful-links)).
+
+<table style="width: 100%; table-layout: fixed;">
+<tr>
+  <!-- Column for the first image -->
+  <td style="width: 50%; vertical-align: bottom;">
+    <img width="300" src="assets/battery_connection_schematic_01.png" style="display: block;">
+    <p><strong>ESP8266</strong><br>
+      With a 100k Ohm resistor, connect the positive<br>
+      side of the battery to pin `A0`.</p>
+  </td>
+  <!-- Column for the second image -->
+  <td style="width: 50%; vertical-align: bottom;">
+    <img width="250" src="assets/battery_connection_schematic_esp32.png" style="display: block;">
+    <p><strong>ESP32</strong> (+S2, S3, C3 etc...)<br>
+      Use a voltage divider (two resistors of equal value).<br>
+      Connect to ADC1 (GPIO32 - GPIO39). GPIO35 is Default.</p>
+  </td>
+</tr>
+</table>
+
+<br><br>
+
+## Define Your Options
 
 | Name                                            | Unit        | Description                                                                           |
 | ----------------------------------------------- | ----------- |-------------------------------------------------------------------------------------- |
-| `USERMOD_BATTERY`                               |             | define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp |
-| `USERMOD_BATTERY_USE_LIPO`                      |             | define this (in `my_config.h`) if you use LiPo rechargeables (1S)                     |
-| `USERMOD_BATTERY_MEASUREMENT_PIN`               |             | defaults to A0 on ESP8266 and GPIO35 on ESP32                                         |
-| `USERMOD_BATTERY_MEASUREMENT_INTERVAL`          | ms          | battery check interval. defaults to 30 seconds                                        |
-| `USERMOD_BATTERY_MIN_VOLTAGE`                   | v           | minimum battery voltage. default is 2.6 (18650 battery standard)                      |
-| `USERMOD_BATTERY_MAX_VOLTAGE`                   | v           | maximum battery voltage. default is 4.2 (18650 battery standard)                      |
-| `USERMOD_BATTERY_TOTAL_CAPACITY`                | mAh         | the capacity of all cells in parralel sumed up                                        |
-| `USERMOD_BATTERY_CALIBRATION`                   |             | offset / calibration number, fine tune the measured voltage by the microcontroller    |
+| `USERMOD_BATTERY`                               |             | Define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp |
+| `USERMOD_BATTERY_MEASUREMENT_PIN`               |             | Defaults to A0 on ESP8266 and GPIO35 on ESP32                                         |
+| `USERMOD_BATTERY_MEASUREMENT_INTERVAL`          | ms          | Battery check interval. defaults to 30 seconds                                        |
+| `USERMOD_BATTERY_INITIAL_DELAY`                 | ms          | Delay before initial reading. defaults to 10 seconds to allow voltage stabilization   |
+| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE`            | v           | Minimum battery voltage. default is 2.6 (18650 battery standard)                      |
+| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE`            | v           | Maximum battery voltage. default is 4.2 (18650 battery standard)                      |
+| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY`         | mAh         | The capacity of all cells in parallel summed up                                       |
+| `USERMOD_BATTERY_{TYPE}_CALIBRATION`            |             | Offset / calibration number, fine tune the measured voltage by the microcontroller    |
 | Auto-Off                                        | ---         | ---                                                                                   |
-| `USERMOD_BATTERY_AUTO_OFF_ENABLED`              | true/false  | enables auto-off                                                                      |
-| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD`            | % (0-100)   | when this threshold is reached master power turns off                                 |
+| `USERMOD_BATTERY_AUTO_OFF_ENABLED`              | true/false  | Enables auto-off                                                                      |
+| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD`            | % (0-100)   | When this threshold is reached master power turns off                                 |
 | Low-Power-Indicator                             | ---         | ---                                                                                   |
-| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED`   | true/false  | enables low power indication                                                          |
-| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET`    | preset id   | when low power is detected then use this preset to indicate low power                 |
-| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100)   | when this threshold is reached low power gets indicated                               |
-| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION`  | seconds     | for this long the configured preset is played                                         |
+| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED`   | true/false  | Enables low power indication                                                          |
+| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET`    | preset id   | When low power is detected then use this preset to indicate low power                 |
+| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100)   | When this threshold is reached low power gets indicated                               |
+| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION`  | seconds     | For this long the configured preset is played                                         |
 
 All parameters can be configured at runtime via the Usermods settings page.
 
+<br>
+
+**NOTICE:** Each Battery type can be pre-configured individualy (in `my_config.h`)
+
+| Name            | Alias         | `my_config.h` example                 |
+| --------------- | ------------- | ------------------------------------- |
+| Lithium Polymer | lipo (Li-Po)  | `USERMOD_BATTERY_lipo_MIN_VOLTAGE`    |
+| Lithium Ionen   | lion (Li-Ion) | `USERMOD_BATTERY_lion_TOTAL_CAPACITY` |
+
+<br><br>
+
+## 🔧 Calibration
+
+The calibration number is a value that is added to the final computed voltage after it has been scaled by the voltage multiplier. 
+
+It fine-tunes the voltage reading so that it more closely matches the actual battery voltage, compensating for inaccuracies inherent in the voltage divider resistors or the ESP's ADC measurements.
+
+Set calibration either in the Usermods settings page or at compile time in `my_config.h` or `platformio_override.ini`.
+
+It can be either a positive or negative number.
+
+<br><br>
+
 ## ⚠️ Important
 
-- Make sure you know your battery specifications! All batteries are **NOT** the same!
-- Example:
+Make sure you know your battery specifications! All batteries are **NOT** the same!
 
-| Your battery specification table  |                 | Options you can define        | 
-| :-------------------------------- |:--------------- | :---------------------------- |
-| Capacity                          | 3500mAh 12,5 Wh |                               |
-| Minimum capacity                  | 3350mAh 11,9 Wh |                               |
+Example:
+
+| Your battery specification table  |                 | Options you can define        |
+| --------------------------------- | --------------- | ----------------------------- |
+| Capacity                          | 3500mAh 12.5Wh  |                               |
+| Minimum capacity                  | 3350mAh 11.9Wh  |                               |
 | Rated voltage                     | 3.6V - 3.7V     |                               |
-| **Charging end voltage**          | **4,2V ± 0,05** | `USERMOD_BATTERY_MAX_VOLTAGE` |
-| **Discharge voltage**             | **2,5V**        | `USERMOD_BATTERY_MIN_VOLTAGE` |
+| **Charging end voltage**          | **4.2V ± 0.05** | `USERMOD_BATTERY_MAX_VOLTAGE` |
+| **Discharge voltage**             | **2.5V**        | `USERMOD_BATTERY_MIN_VOLTAGE` |
 | Max. discharge current (constant) | 10A (10000mA)   |                               |
 | max. charging current             | 1.7A (1700mA)   |                               |
 | ...                               | ...             | ...                           |
 | ..                                | ..              | ..                            |
 
-Specification from:  [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833)
+Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833)
+
+<br><br>
 
 ## 🌐 Useful Links
 
 - https://lazyzero.de/elektronik/esp8266/wemos_d1_mini_a0/start
 - https://arduinodiy.wordpress.com/2016/12/25/monitoring-lipo-battery-voltage-with-wemos-d1-minibattery-shield-and-thingspeak/
 
+<br><br>
+
 ## 📝 Change Log
 
+2024-05-11
+
+- Documentation updated
+
+2024-04-30
+
+- Integrate factory pattern to make it easier to add other / custom battery types
+- Update readme
+- Improved initial reading accuracy by delaying initial measurement to allow voltage to stabilize at power-on
+
 2023-01-04
 
-- basic support for LiPo rechargeable batteries ( `-D USERMOD_BATTERY_USE_LIPO`)
-- improved support for esp32 (read calibrated voltage)
-- corrected config saving (measurement pin, and battery min/max were lost)
-- various bugfixes
+- Basic support for LiPo rechargeable batteries (`-D USERMOD_BATTERY_USE_LIPO`)
+- Improved support for ESP32 (read calibrated voltage)
+- Corrected config saving (measurement pin, and battery min/max were lost)
+- Various bugfixes
 
 2022-12-25
 
-- added "auto-off" feature
-- added "low-power-indication" feature
-- added "calibration/offset" field to configuration page
-- added getter and setter, so that user usermods could interact with this one
-- update readme (added new options, made it markdownlint compliant)
+- Added "auto-off" feature
+- Added "low-power-indication" feature
+- Added "calibration/offset" field to configuration page
+- Added getter and setter, so that user usermods could interact with this one
+- Update readme (added new options, made it markdownlint compliant)
 
 2021-09-02
 
-- added "Battery voltage" to info
-- added circuit diagram to readme
-- added MQTT support, sending battery voltage
-- minor fixes
+- Added "Battery voltage" to info
+- Added circuit diagram to readme
+- Added MQTT support, sending battery voltage
+- Minor fixes
 
 2021-08-15
 
-- changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries
+- Changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries
 - Updated readme, added specification table
 
 2021-08-10

usermods/Battery/types/LionUMBattery.h

@@ -0,0 +1,38 @@
+#ifndef UMBLion_h
+#define UMBLion_h
+
+#include "../battery_defaults.h"
+#include "../UMBattery.h"
+
+/**
+ *  LiOn Battery
+ * 
+ */
+class LionUMBattery : public UMBattery
+{
+    private:
+
+    public:
+        LionUMBattery() : UMBattery()
+        {
+            this->setMinVoltage(USERMOD_BATTERY_LION_MIN_VOLTAGE);
+            this->setMaxVoltage(USERMOD_BATTERY_LION_MAX_VOLTAGE);
+        }
+
+        float mapVoltage(float v, float min, float max) override
+        {
+            return this->linearMapping(v, min, max); // basic mapping
+        };
+
+        void calculateAndSetLevel(float voltage) override
+        {
+            this->setLevel(this->mapVoltage(voltage, this->getMinVoltage(), this->getMaxVoltage()));
+        };
+
+        virtual void setMaxVoltage(float voltage) override
+        {
+            this->maxVoltage = max(getMinVoltage()+1.0f, voltage);
+        }
+};
+
+#endif

usermods/Battery/types/LipoUMBattery.h

@@ -0,0 +1,54 @@
+#ifndef UMBLipo_h
+#define UMBLipo_h
+
+#include "../battery_defaults.h"
+#include "../UMBattery.h"
+
+/**
+ *  LiPo Battery
+ * 
+ */
+class LipoUMBattery : public UMBattery
+{
+    private:
+
+    public:
+        LipoUMBattery() : UMBattery()
+        {
+            this->setMinVoltage(USERMOD_BATTERY_LIPO_MIN_VOLTAGE);
+            this->setMaxVoltage(USERMOD_BATTERY_LIPO_MAX_VOLTAGE);
+        }
+
+        /**
+         * LiPo batteries have a differnt discharge curve, see 
+         * https://blog.ampow.com/lipo-voltage-chart/
+         */
+        float mapVoltage(float v, float min, float max) override 
+        {
+            float lvl = 0.0f;
+            lvl = this->linearMapping(v, min, max); // basic mapping
+
+            if (lvl < 40.0f) 
+                lvl = this->linearMapping(lvl, 0, 40, 0, 12);       // last 45% -> drops very quickly
+            else {
+            if (lvl < 90.0f)
+                lvl = this->linearMapping(lvl, 40, 90, 12, 95);     // 90% ... 40% -> almost linear drop
+            else // level >  90%
+                lvl = this->linearMapping(lvl, 90, 105, 95, 100);   // highest 15% -> drop slowly
+            }
+
+            return lvl;
+        };
+
+        void calculateAndSetLevel(float voltage) override
+        {
+            this->setLevel(this->mapVoltage(voltage, this->getMinVoltage(), this->getMaxVoltage()));
+        };
+
+        virtual void setMaxVoltage(float voltage) override
+        {
+            this->maxVoltage = max(getMinVoltage()+0.7f, voltage);
+        }
+};
+
+#endif

usermods/Battery/types/UnkownUMBattery.h

@@ -0,0 +1,39 @@
+#ifndef UMBUnkown_h
+#define UMBUnkown_h
+
+#include "../battery_defaults.h"
+#include "../UMBattery.h"
+
+/**
+ *  Unkown / Default Battery
+ * 
+ */
+class UnkownUMBattery : public UMBattery
+{
+    private:
+
+    public:
+        UnkownUMBattery() : UMBattery()
+        {
+            this->setMinVoltage(USERMOD_BATTERY_UNKOWN_MIN_VOLTAGE);
+            this->setMaxVoltage(USERMOD_BATTERY_UNKOWN_MAX_VOLTAGE);
+        }
+
+        void update(batteryConfig cfg)
+        {
+            if(cfg.minVoltage) this->setMinVoltage(cfg.minVoltage); else this->setMinVoltage(USERMOD_BATTERY_UNKOWN_MIN_VOLTAGE);
+            if(cfg.maxVoltage) this->setMaxVoltage(cfg.maxVoltage); else this->setMaxVoltage(USERMOD_BATTERY_UNKOWN_MAX_VOLTAGE);
+        }
+
+        float mapVoltage(float v, float min, float max) override
+        {
+            return this->linearMapping(v, min, max); // basic mapping
+        };
+
+        void calculateAndSetLevel(float voltage) override
+        {
+            this->setLevel(this->mapVoltage(voltage, this->getMinVoltage(), this->getMaxVoltage()));
+        };
+};
+
+#endif

usermods/Battery/usermod_v2_Battery.h

@@ -2,12 +2,15 @@
 
 #include "wled.h"
 #include "battery_defaults.h"
+#include "UMBattery.h"
+#include "types/UnkownUMBattery.h"
+#include "types/LionUMBattery.h"
+#include "types/LiPoUMBattery.h"
 
 /*
  * Usermod by Maximilian Mewes
- * Mail: mewes.maximilian@gmx.de
- * GitHub: itCarl
- * Date: 25.12.2022
+ * E-mail: mewes.maximilian@gmx.de
+ * Created at: 25.12.2022
  * If you have any questions, please feel free to contact me.
  */
 class UsermodBattery : public Usermod 
@@ -15,47 +18,36 @@ class UsermodBattery : public Usermod
   private:
     // battery pin can be defined in my_config.h
     int8_t batteryPin = USERMOD_BATTERY_MEASUREMENT_PIN;
+    
+    UMBattery* bat = new UnkownUMBattery();
+    batteryConfig cfg;
+
+    // Initial delay before first reading to allow voltage stabilization
+    unsigned long initialDelay = USERMOD_BATTERY_INITIAL_DELAY;
+    bool initialDelayComplete = false;
+    bool isFirstVoltageReading = true;
     // how often to read the battery voltage
     unsigned long readingInterval = USERMOD_BATTERY_MEASUREMENT_INTERVAL;
     unsigned long nextReadTime = 0;
     unsigned long lastReadTime = 0;
-    // battery min. voltage
-    float minBatteryVoltage = USERMOD_BATTERY_MIN_VOLTAGE;
-    // battery max. voltage
-    float maxBatteryVoltage = USERMOD_BATTERY_MAX_VOLTAGE;
-    // all battery cells summed up
-    unsigned int totalBatteryCapacity = USERMOD_BATTERY_TOTAL_CAPACITY;
-    // raw analog reading 
-    float rawValue = 0.0f;
-    // calculated voltage            
-    float voltage = maxBatteryVoltage;
     // between 0 and 1, to control strength of voltage smoothing filter
-    float alpha = 0.05f;
-    // multiplier for the voltage divider that is in place between ADC pin and battery, default will be 2 but might be adapted to readout voltages over ~5v ESP32 or ~6.6v ESP8266
-    float voltageMultiplier = USERMOD_BATTERY_VOLTAGE_MULTIPLIER;
-    // mapped battery level based on voltage
-    int8_t batteryLevel = 100;
-    // offset or calibration value to fine tune the calculated voltage
-    float calibration = USERMOD_BATTERY_CALIBRATION;
-    
-    // time left estimation feature
-    // bool calculateTimeLeftEnabled = USERMOD_BATTERY_CALCULATE_TIME_LEFT_ENABLED;
-    // float estimatedTimeLeft = 0.0;
+    float alpha = USERMOD_BATTERY_AVERAGING_ALPHA;
 
     // auto shutdown/shutoff/master off feature
     bool autoOffEnabled = USERMOD_BATTERY_AUTO_OFF_ENABLED;
-    int8_t autoOffThreshold = USERMOD_BATTERY_AUTO_OFF_THRESHOLD;
+    uint8_t autoOffThreshold = USERMOD_BATTERY_AUTO_OFF_THRESHOLD;
 
     // low power indicator feature
     bool lowPowerIndicatorEnabled = USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED;
-    int8_t lowPowerIndicatorPreset = USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET;
-    int8_t lowPowerIndicatorThreshold = USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD;
-    int8_t lowPowerIndicatorReactivationThreshold = lowPowerIndicatorThreshold+10;
-    int8_t lowPowerIndicatorDuration = USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION;
+    uint8_t lowPowerIndicatorPreset = USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET;
+    uint8_t lowPowerIndicatorThreshold = USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD;
+    uint8_t lowPowerIndicatorReactivationThreshold = lowPowerIndicatorThreshold+10;
+    uint8_t lowPowerIndicatorDuration = USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION;
     bool lowPowerIndicationDone = false;
     unsigned long lowPowerActivationTime = 0; // used temporary during active time
-    int8_t lastPreset = 0;
+    uint8_t lastPreset = 0;
 
+    //
     bool initDone = false;
     bool initializing = true;
 
@@ -67,22 +59,17 @@ class UsermodBattery : public Usermod
     static const char _preset[];
     static const char _duration[];
     static const char _init[];
-    
-
-    // custom map function
-    // https://forum.arduino.cc/t/floating-point-using-map-function/348113/2
-    double mapf(double x, double in_min, double in_max, double out_min, double out_max) 
-    {
-      return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
-    }
 
+    /**
+     * Helper for rounding floating point values 
+     */
     float dot2round(float x) 
     {
       float nx = (int)(x * 100 + .5);
       return (float)(nx / 100);
     }
 
-    /*
+    /**
      * Turn off all leds
      */
     void turnOff()
@@ -91,15 +78,15 @@ class UsermodBattery : public Usermod
       stateUpdated(CALL_MODE_DIRECT_CHANGE);
     }
 
-    /*
+    /**
      * Indicate low power by activating a configured preset for a given time and then switching back to the preset that was selected previously
      */
     void lowPowerIndicator()
     {
       if (!lowPowerIndicatorEnabled) return;
       if (batteryPin < 0) return;  // no measurement
-      if (lowPowerIndicationDone && lowPowerIndicatorReactivationThreshold <= batteryLevel) lowPowerIndicationDone = false;
-      if (lowPowerIndicatorThreshold <= batteryLevel) return;
+      if (lowPowerIndicationDone && lowPowerIndicatorReactivationThreshold <= bat->getLevel()) lowPowerIndicationDone = false;
+      if (lowPowerIndicatorThreshold <= bat->getLevel()) return;
       if (lowPowerIndicationDone) return;
       if (lowPowerActivationTime <= 1) {
         lowPowerActivationTime = millis();
@@ -114,26 +101,39 @@ class UsermodBattery : public Usermod
       }      
     }
 
+    /**
+     * read the battery voltage in different ways depending on the architecture 
+     */
     float readVoltage()
     {
       #ifdef ARDUINO_ARCH_ESP32
         // use calibrated millivolts analogread on esp32 (150 mV ~ 2450 mV default attentuation) and divide by 1000 to get from milivolts to volts and multiply by voltage multiplier and apply calibration value
-        return (analogReadMilliVolts(batteryPin) / 1000.0f) * voltageMultiplier  + calibration;
+        return (analogReadMilliVolts(batteryPin) / 1000.0f) * bat->getVoltageMultiplier()  + bat->getCalibration();
       #else
         // use analog read on esp8266 ( 0V ~ 1V no attenuation options) and divide by ADC precision 1023 and multiply by voltage multiplier and apply calibration value
-        return (analogRead(batteryPin) / 1023.0f) * voltageMultiplier + calibration;
+        return (analogRead(batteryPin) / 1023.0f) * bat->getVoltageMultiplier() + bat->getCalibration();
       #endif
     }
 
   public:
     //Functions called by WLED
 
-    /*
+    /**
      * setup() is called once at boot. WiFi is not yet connected at this point.
      * You can use it to initialize variables, sensors or similar.
      */
     void setup() 
     {
+      // plug in the right battery type
+      if(cfg.type == (batteryType)lipo) {
+        bat = new LipoUMBattery();
+      } else if(cfg.type == (batteryType)lion) {
+        bat = new LionUMBattery();
+      }
+
+      // update the choosen battery type with configured values
+      bat->update(cfg);
+
       #ifdef ARDUINO_ARCH_ESP32
         bool success = false;
         DEBUG_PRINTLN(F("Allocating battery pin..."));
@@ -141,7 +141,6 @@ class UsermodBattery : public Usermod
           if (pinManager.allocatePin(batteryPin, false, PinOwner::UM_Battery)) {
             DEBUG_PRINTLN(F("Battery pin allocation succeeded."));
             success = true;
-            voltage = readVoltage();
           }
 
         if (!success) {
@@ -152,17 +151,17 @@ class UsermodBattery : public Usermod
         }
       #else //ESP8266 boards have only one analog input pin A0
         pinMode(batteryPin, INPUT);
-        voltage = readVoltage();
       #endif
 
-      nextReadTime = millis() + readingInterval;
+      // First voltage reading is delayed to allow voltage stabilization after powering up
+      nextReadTime = millis() + initialDelay;
       lastReadTime = millis();
 
       initDone = true;
     }
 
 
-    /*
+    /**
      * connected() is called every time the WiFi is (re)connected
      * Use it to initialize network interfaces
      */
@@ -182,6 +181,25 @@ class UsermodBattery : public Usermod
 
       lowPowerIndicator();
 
+      // Handling the initial delay
+      if (!initialDelayComplete && millis() < nextReadTime)
+        return; // Continue to return until the initial delay is over
+
+      // Once the initial delay is over, set it as complete
+      if (!initialDelayComplete)
+        {
+          initialDelayComplete = true;
+          // Set the regular interval after initial delay
+          nextReadTime = millis() + readingInterval;
+        }
+
+      // Make the first voltage reading after the initial delay has elapsed
+      if (isFirstVoltageReading)
+        {
+          bat->setVoltage(readVoltage());
+          isFirstVoltageReading = false;
+        }
+
       // check the battery level every USERMOD_BATTERY_MEASUREMENT_INTERVAL (ms)
       if (millis() < nextReadTime) return;
 
@@ -191,43 +209,17 @@ class UsermodBattery : public Usermod
       if (batteryPin < 0) return;  // nothing to read
 
       initializing = false;
+      float rawValue = readVoltage();
 
-      rawValue = readVoltage();
       // filter with exponential smoothing because ADC in esp32 is fluctuating too much for a good single readout
-      voltage = voltage + alpha * (rawValue - voltage);
-
-      // check if voltage is within specified voltage range, allow 10% over/under voltage - removed cause this just makes it hard for people to troubleshoot as the voltage in the web gui will say invalid instead of displaying a voltage
-      //voltage = ((voltage < minBatteryVoltage * 0.85f) || (voltage > maxBatteryVoltage * 1.1f)) ? -1.0f : voltage;
+      float filteredVoltage = bat->getVoltage() + alpha * (rawValue - bat->getVoltage());
 
+      bat->setVoltage(filteredVoltage);
       // translate battery voltage into percentage
-      /*
-        the standard "map" function doesn't work
-        https://www.arduino.cc/reference/en/language/functions/math/map/  notes and warnings at the bottom
-      */
-      #ifdef USERMOD_BATTERY_USE_LIPO
-        batteryLevel = mapf(voltage, minBatteryVoltage, maxBatteryVoltage, 0, 100); // basic mapping
-        // LiPo batteries have a differnt dischargin curve, see 
-        //  https://blog.ampow.com/lipo-voltage-chart/
-        if (batteryLevel < 40.0f) 
-          batteryLevel = mapf(batteryLevel, 0, 40, 0, 12);       // last 45% -> drops very quickly
-        else {
-          if (batteryLevel < 90.0f)
-            batteryLevel = mapf(batteryLevel, 40, 90, 12, 95);   // 90% ... 40% -> almost linear drop
-          else // level >  90%
-            batteryLevel = mapf(batteryLevel, 90, 105, 95, 100); // highest 15% -> drop slowly
-        }
-      #else
-        batteryLevel = mapf(voltage, minBatteryVoltage, maxBatteryVoltage, 0, 100);
-      #endif
-      if (voltage > -1.0f) batteryLevel = constrain(batteryLevel, 0.0f, 110.0f);
-
-      // if (calculateTimeLeftEnabled) {
-      //   float currentBatteryCapacity = totalBatteryCapacity;
-      //   estimatedTimeLeft = (currentBatteryCapacity/strip.currentMilliamps)*60;
-      // }
+      bat->calculateAndSetLevel(filteredVoltage);
 
       // Auto off -- Master power off
-      if (autoOffEnabled && (autoOffThreshold >= batteryLevel))
+      if (autoOffEnabled && (autoOffThreshold >= bat->getLevel()))
         turnOff();
 
 #ifndef WLED_DISABLE_MQTT
@@ -236,13 +228,13 @@ class UsermodBattery : public Usermod
       if (WLED_MQTT_CONNECTED) {
         char buf[64]; // buffer for snprintf()
         snprintf_P(buf, 63, PSTR("%s/voltage"), mqttDeviceTopic);
-        mqtt->publish(buf, 0, false, String(voltage).c_str());
+        mqtt->publish(buf, 0, false, String(bat->getVoltage()).c_str());
       }
 #endif
 
     }
 
-    /*
+    /**
      * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
      * Below it is shown how this could be used for e.g. a light sensor
@@ -262,16 +254,6 @@ class UsermodBattery : public Usermod
       // info modal display names
       JsonArray infoPercentage = user.createNestedArray(F("Battery level"));
       JsonArray infoVoltage = user.createNestedArray(F("Battery voltage"));
-      // if (calculateTimeLeftEnabled)
-      // {
-      //   JsonArray infoEstimatedTimeLeft = user.createNestedArray(F("Estimated time left"));
-      //   if (initializing) {
-      //     infoEstimatedTimeLeft.add(FPSTR(_init));
-      //   } else {
-      //     infoEstimatedTimeLeft.add(estimatedTimeLeft);
-      //     infoEstimatedTimeLeft.add(F(" min"));
-      //   }
-      // }
       JsonArray infoNextUpdate = user.createNestedArray(F("Next update"));
 
       infoNextUpdate.add((nextReadTime - millis()) / 1000);
@@ -283,46 +265,104 @@ class UsermodBattery : public Usermod
         return;
       }
 
-      if (batteryLevel < 0) {
+      if (bat->getLevel() < 0) {
         infoPercentage.add(F("invalid"));
       } else {
-        infoPercentage.add(batteryLevel);
+        infoPercentage.add(bat->getLevel());
       }
       infoPercentage.add(F(" %"));
 
-      if (voltage < 0) {
+      if (bat->getVoltage() < 0) {
         infoVoltage.add(F("invalid"));
       } else {
-        infoVoltage.add(dot2round(voltage));
+        infoVoltage.add(dot2round(bat->getVoltage()));
       }
       infoVoltage.add(F(" V"));
     }
 
+    void addBatteryToJsonObject(JsonObject& battery, bool forJsonState)
+    {
+      if(forJsonState) { battery[F("type")] = cfg.type; } else {battery[F("type")] = (String)cfg.type; }  // has to be a String otherwise it won't get converted to a Dropdown
+      battery[F("min-voltage")] = bat->getMinVoltage();
+      battery[F("max-voltage")] = bat->getMaxVoltage();
+      battery[F("calibration")] = bat->getCalibration();
+      battery[F("voltage-multiplier")] = bat->getVoltageMultiplier();
+      battery[FPSTR(_readInterval)] = readingInterval;
 
-    /*
+      JsonObject ao = battery.createNestedObject(F("auto-off"));  // auto off section
+      ao[FPSTR(_enabled)] = autoOffEnabled;
+      ao[FPSTR(_threshold)] = autoOffThreshold;
+
+      JsonObject lp = battery.createNestedObject(F("indicator")); // low power section
+      lp[FPSTR(_enabled)] = lowPowerIndicatorEnabled;
+      lp[FPSTR(_preset)] = lowPowerIndicatorPreset; // dropdown trickery (String)lowPowerIndicatorPreset; 
+      lp[FPSTR(_threshold)] = lowPowerIndicatorThreshold;
+      lp[FPSTR(_duration)] = lowPowerIndicatorDuration;
+    }
+
+    void getUsermodConfigFromJsonObject(JsonObject& battery)
+    {
+      getJsonValue(battery[F("type")], cfg.type);
+      getJsonValue(battery[F("min-voltage")], cfg.minVoltage);
+      getJsonValue(battery[F("max-voltage")], cfg.maxVoltage);
+      getJsonValue(battery[F("calibration")], cfg.calibration);
+      getJsonValue(battery[F("voltage-multiplier")], cfg.voltageMultiplier);
+    
+      setReadingInterval(battery[FPSTR(_readInterval)] | readingInterval);
+
+      JsonObject ao = battery[F("auto-off")];
+      setAutoOffEnabled(ao[FPSTR(_enabled)] | autoOffEnabled);
+      setAutoOffThreshold(ao[FPSTR(_threshold)] | autoOffThreshold);
+
+      JsonObject lp = battery[F("indicator")];
+      setLowPowerIndicatorEnabled(lp[FPSTR(_enabled)] | lowPowerIndicatorEnabled);
+      setLowPowerIndicatorPreset(lp[FPSTR(_preset)] | lowPowerIndicatorPreset);
+      setLowPowerIndicatorThreshold(lp[FPSTR(_threshold)] | lowPowerIndicatorThreshold);
+      lowPowerIndicatorReactivationThreshold = lowPowerIndicatorThreshold+10;
+      setLowPowerIndicatorDuration(lp[FPSTR(_duration)] | lowPowerIndicatorDuration);
+      
+      if(initDone) 
+        bat->update(cfg);
+    }
+
+    /**
      * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    /*
     void addToJsonState(JsonObject& root)
     {
+      JsonObject battery = root.createNestedObject(FPSTR(_name));
 
+      if (battery.isNull())
+        battery = root.createNestedObject(FPSTR(_name));
+      
+      addBatteryToJsonObject(battery, true);
+      
+      DEBUG_PRINTLN(F("Battery state exposed in JSON API."));
     }
-    */
 
 
-    /*
+    /**
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
     /*
     void readFromJsonState(JsonObject& root)
     {
+      if (!initDone) return;  // prevent crash on boot applyPreset()
+
+      JsonObject battery = root[FPSTR(_name)];
+
+      if (!battery.isNull()) {
+        getUsermodConfigFromJsonObject(battery);
+      
+        DEBUG_PRINTLN(F("Battery state read from JSON API."));
+      }
     }
     */
 
 
-    /*
+    /**
      * addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
      * It will be called by WLED when settings are actually saved (for example, LED settings are saved)
      * If you want to force saving the current state, use serializeConfig() in your loop().
@@ -359,47 +399,41 @@ class UsermodBattery : public Usermod
      */
     void addToConfig(JsonObject& root)
     {
-      JsonObject battery = root.createNestedObject(FPSTR(_name));           // usermodname
+      JsonObject battery = root.createNestedObject(FPSTR(_name));
+      
+      if (battery.isNull()) {
+        battery = root.createNestedObject(FPSTR(_name));
+      }
+
       #ifdef ARDUINO_ARCH_ESP32
         battery[F("pin")] = batteryPin;
       #endif
-
-      // battery[F("time-left")] = calculateTimeLeftEnabled;
-      battery[F("min-voltage")] = minBatteryVoltage;
-      battery[F("max-voltage")] = maxBatteryVoltage;
-      battery[F("capacity")] = totalBatteryCapacity;
-      battery[F("calibration")] = calibration;
-      battery[F("voltage-multiplier")] = voltageMultiplier;
-      battery[FPSTR(_readInterval)] = readingInterval;
       
-      JsonObject ao = battery.createNestedObject(F("auto-off"));               // auto off section
-      ao[FPSTR(_enabled)] = autoOffEnabled;
-      ao[FPSTR(_threshold)] = autoOffThreshold;
-
-      JsonObject lp = battery.createNestedObject(F("indicator"));    // low power section
-      lp[FPSTR(_enabled)] = lowPowerIndicatorEnabled;
-      lp[FPSTR(_preset)] = lowPowerIndicatorPreset; // dropdown trickery (String)lowPowerIndicatorPreset; 
-      lp[FPSTR(_threshold)] = lowPowerIndicatorThreshold;
-      lp[FPSTR(_duration)] = lowPowerIndicatorDuration;
+      addBatteryToJsonObject(battery, false);
 
       // read voltage in case calibration or voltage multiplier changed to see immediate effect
-      voltage = readVoltage();
+      bat->setVoltage(readVoltage());
 
       DEBUG_PRINTLN(F("Battery config saved."));
     }
 
     void appendConfigData()
     {
-      oappend(SET_F("addInfo('Battery:min-voltage', 1, 'v');"));
-      oappend(SET_F("addInfo('Battery:max-voltage', 1, 'v');"));
-      oappend(SET_F("addInfo('Battery:capacity', 1, 'mAh');"));
-      oappend(SET_F("addInfo('Battery:interval', 1, 'ms');"));
-      oappend(SET_F("addInfo('Battery:auto-off:threshold', 1, '%');"));
-      oappend(SET_F("addInfo('Battery:indicator:threshold', 1, '%');"));
-      oappend(SET_F("addInfo('Battery:indicator:duration', 1, 's');"));
+      // Total: 462 Bytes
+      oappend(SET_F("td=addDropdown('Battery', 'type');"));               // 35 Bytes
+      oappend(SET_F("addOption(td, 'Unkown', '0');"));                    // 30 Bytes
+      oappend(SET_F("addOption(td, 'LiPo', '1');"));                      // 28 Bytes
+      oappend(SET_F("addOption(td, 'LiOn', '2');"));                      // 28 Bytes
+      oappend(SET_F("addInfo('Battery:type',1,'<small style=\"color:orange\">requires reboot</small>');")); // 81 Bytes
+      oappend(SET_F("addInfo('Battery:min-voltage', 1, 'v');"));          // 40 Bytes
+      oappend(SET_F("addInfo('Battery:max-voltage', 1, 'v');"));          // 40 Bytes
+      oappend(SET_F("addInfo('Battery:interval', 1, 'ms');"));            // 38 Bytes
+      oappend(SET_F("addInfo('Battery:auto-off:threshold', 1, '%');"));   // 47 Bytes
+      oappend(SET_F("addInfo('Battery:indicator:threshold', 1, '%');"));  // 48 Bytes
+      oappend(SET_F("addInfo('Battery:indicator:duration', 1, 's');"));   // 47 Bytes
       
-      // cannot quite get this mf to work. its exeeding some buffer limit i think
-      // what i wanted is a list of all presets to select one from
+      // this option list would exeed the oappend() buffer
+      // a list of all presets to select one from
       // oappend(SET_F("bd=addDropdown('Battery:low-power-indicator', 'preset');"));
       // the loop generates: oappend(SET_F("addOption(bd, 'preset name', preset id);"));
       // for(int8_t i=1; i < 42; i++) {
@@ -412,7 +446,7 @@ class UsermodBattery : public Usermod
     }
 
 
-    /*
+    /**
      * readFromConfig() can be used to read back the custom settings you added with addToConfig().
      * This is called by WLED when settings are loaded (currently this only happens immediately after boot, or after saving on the Usermod Settings page)
      * 
@@ -445,25 +479,13 @@ class UsermodBattery : public Usermod
         newBatteryPin     = battery[F("pin")] | newBatteryPin;
       #endif
       // calculateTimeLeftEnabled = battery[F("time-left")] | calculateTimeLeftEnabled;
-      setMinBatteryVoltage(battery[F("min-voltage")] | minBatteryVoltage);
-      setMaxBatteryVoltage(battery[F("max-voltage")] | maxBatteryVoltage);
-      setTotalBatteryCapacity(battery[F("capacity")] | totalBatteryCapacity);
-      setCalibration(battery[F("calibration")] | calibration);
-      setVoltageMultiplier(battery[F("voltage-multiplier")] | voltageMultiplier);
+      setMinBatteryVoltage(battery[F("min-voltage")] | bat->getMinVoltage());
+      setMaxBatteryVoltage(battery[F("max-voltage")] | bat->getMaxVoltage());
+      setCalibration(battery[F("calibration")] | bat->getCalibration());
+      setVoltageMultiplier(battery[F("voltage-multiplier")] | bat->getVoltageMultiplier());
       setReadingInterval(battery[FPSTR(_readInterval)] | readingInterval);
 
-      JsonObject ao = battery[F("auto-off")];
-      setAutoOffEnabled(ao[FPSTR(_enabled)] | autoOffEnabled);
-      setAutoOffThreshold(ao[FPSTR(_threshold)] | autoOffThreshold);
-
-      JsonObject lp = battery[F("indicator")];
-      setLowPowerIndicatorEnabled(lp[FPSTR(_enabled)] | lowPowerIndicatorEnabled);
-      setLowPowerIndicatorPreset(lp[FPSTR(_preset)] | lowPowerIndicatorPreset); // dropdown trickery (int)lp["preset"]
-      setLowPowerIndicatorThreshold(lp[FPSTR(_threshold)] | lowPowerIndicatorThreshold);
-      lowPowerIndicatorReactivationThreshold = lowPowerIndicatorThreshold+10;
-      setLowPowerIndicatorDuration(lp[FPSTR(_duration)] | lowPowerIndicatorDuration);
-
-      DEBUG_PRINT(FPSTR(_name));
+      getUsermodConfigFromJsonObject(battery);
 
       #ifdef ARDUINO_ARCH_ESP32
         if (!initDone) 
@@ -491,8 +513,9 @@ class UsermodBattery : public Usermod
       return !battery[FPSTR(_readInterval)].isNull();
     }
 
-    /*
-     * Generate a preset sample for low power indication 
+    /**
+     * TBD: Generate a preset sample for low power indication
+     * a button on the config page would be cool, currently not possible
      */
     void generateExamplePreset()
     {
@@ -529,7 +552,7 @@ class UsermodBattery : public Usermod
      *
      */
 
-    /*
+    /**
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
      * This could be used in the future for the system to determine whether your usermod is installed.
      */
@@ -538,13 +561,23 @@ class UsermodBattery : public Usermod
       return USERMOD_ID_BATTERY;
     }
 
+    /**
+     * get currently active battery type
+     */
+    batteryType getBatteryType()
+    {
+      return cfg.type;
+    }
 
+    /**
+     * 
+     */
     unsigned long getReadingInterval()
     {
       return readingInterval;
     }
 
-    /*
+    /**
      * minimum repetition is 3000ms (3s) 
      */
     void setReadingInterval(unsigned long newReadingInterval)
@@ -552,105 +585,84 @@ class UsermodBattery : public Usermod
       readingInterval = max((unsigned long)3000, newReadingInterval);
     }
 
-
-    /*
+    /**
      * Get lowest configured battery voltage
      */
     float getMinBatteryVoltage()
     {
-      return minBatteryVoltage;
+      return bat->getMinVoltage();
     }
 
-    /*
+    /**
      * Set lowest battery voltage
      * can't be below 0 volt
      */
     void setMinBatteryVoltage(float voltage)
     {
-      minBatteryVoltage = max(0.0f, voltage);
+      bat->setMinVoltage(voltage);
     }
 
-    /*
+    /**
      * Get highest configured battery voltage
      */
     float getMaxBatteryVoltage()
     {
-      return maxBatteryVoltage;
+      return bat->getMaxVoltage();
     }
     
-    /*
+    /**
      * Set highest battery voltage
      * can't be below minBatteryVoltage
      */
     void setMaxBatteryVoltage(float voltage)
     {
-      #ifdef USERMOD_BATTERY_USE_LIPO
-        maxBatteryVoltage = max(getMinBatteryVoltage()+0.7f, voltage);
-      #else
-        maxBatteryVoltage = max(getMinBatteryVoltage()+1.0f, voltage);
-      #endif
+      bat->setMaxVoltage(voltage);
     }
 
 
-    /*
-     * Get the capacity of all cells in parralel sumed up
-     * unit: mAh
-     */
-    unsigned int getTotalBatteryCapacity()
-    {
-      return totalBatteryCapacity;
-    }
-
-    void setTotalBatteryCapacity(unsigned int capacity)
-    {
-      totalBatteryCapacity = capacity;
-    }
-
-
-
-    /*
+    /**
      * Get the calculated voltage
      * formula: (adc pin value / adc precision * max voltage) + calibration
      */
     float getVoltage()
     {
-      return voltage;
+      return bat->getVoltage();
     }
 
-    /*
+    /**
      * Get the mapped battery level (0 - 100) based on voltage
      * important: voltage can drop when a load is applied, so its only an estimate
      */
     int8_t getBatteryLevel()
     {
-      return batteryLevel;
+      return bat->getLevel();
     }
 
-    /*
+    /**
      * Get the configured calibration value
      * a offset value to fine-tune the calculated voltage.
      */
     float getCalibration()
     {
-      return calibration;
+      return bat->getCalibration();
     }
 
-    /*
+    /**
      * Set the voltage calibration offset value
      * a offset value to fine-tune the calculated voltage.
      */
     void setCalibration(float offset)
     {
-      calibration = offset;
+      bat->setCalibration(offset);
     }
 
-    /*
+    /**
      * Set the voltage multiplier value
      * A multiplier that may need adjusting for different voltage divider setups
      */
     void setVoltageMultiplier(float multiplier)
     {
-      voltageMultiplier = multiplier;
+      bat->setVoltageMultiplier(multiplier);
     }
 
     /*
@@ -659,10 +671,10 @@ class UsermodBattery : public Usermod
      */
     float getVoltageMultiplier()
     {
-      return voltageMultiplier;
+      return bat->getVoltageMultiplier();
     }
 
-    /*
+    /**
      * Get auto-off feature enabled status
      * is auto-off enabled, true/false
      */
@@ -671,7 +683,7 @@ class UsermodBattery : public Usermod
       return autoOffEnabled;
     }
 
-    /*
+    /**
      * Set auto-off feature status 
      */
     void setAutoOffEnabled(bool enabled)
@@ -679,7 +691,7 @@ class UsermodBattery : public Usermod
       autoOffEnabled = enabled;
     }
     
-    /*
+    /**
      * Get auto-off threshold in percent (0-100)
      */
     int8_t getAutoOffThreshold()
@@ -687,7 +699,7 @@ class UsermodBattery : public Usermod
       return autoOffThreshold;
     }
 
-    /*
+    /**
      * Set auto-off threshold in percent (0-100) 
      */
     void setAutoOffThreshold(int8_t threshold)
@@ -697,8 +709,7 @@ class UsermodBattery : public Usermod
       autoOffThreshold  = lowPowerIndicatorEnabled /*&& autoOffEnabled*/ ? min(lowPowerIndicatorThreshold-1, (int)autoOffThreshold) : autoOffThreshold;
     }
 
-
-    /*
+    /**
      * Get low-power-indicator feature enabled status
      * is the low-power-indicator enabled, true/false
      */
@@ -707,7 +718,7 @@ class UsermodBattery : public Usermod
       return lowPowerIndicatorEnabled;
     }
 
-    /*
+    /**
      * Set low-power-indicator feature status 
      */
     void setLowPowerIndicatorEnabled(bool enabled)
@@ -715,7 +726,7 @@ class UsermodBattery : public Usermod
       lowPowerIndicatorEnabled = enabled;
     }
 
-    /*
+    /**
      * Get low-power-indicator preset to activate when low power is detected
      */
     int8_t getLowPowerIndicatorPreset()
@@ -723,7 +734,7 @@ class UsermodBattery : public Usermod
       return lowPowerIndicatorPreset;
     }
 
-    /* 
+    /** 
      * Set low-power-indicator preset to activate when low power is detected
      */
     void setLowPowerIndicatorPreset(int8_t presetId)
@@ -741,7 +752,7 @@ class UsermodBattery : public Usermod
       return lowPowerIndicatorThreshold;
     }
 
-    /*
+    /**
      * Set low-power-indicator threshold in percent (0-100)
      */
     void setLowPowerIndicatorThreshold(int8_t threshold)
@@ -751,7 +762,7 @@ class UsermodBattery : public Usermod
       lowPowerIndicatorThreshold  = autoOffEnabled /*&& lowPowerIndicatorEnabled*/ ? max(autoOffThreshold+1, (int)lowPowerIndicatorThreshold) : max(5, (int)lowPowerIndicatorThreshold);
     }
 
-    /*
+    /**
      * Get low-power-indicator duration in seconds
      */
     int8_t getLowPowerIndicatorDuration()
@@ -759,7 +770,7 @@ class UsermodBattery : public Usermod
       return lowPowerIndicatorDuration;
     }
 
-    /*
+    /**
      * Set low-power-indicator duration in seconds
      */
     void setLowPowerIndicatorDuration(int8_t duration)
@@ -767,9 +778,8 @@ class UsermodBattery : public Usermod
       lowPowerIndicatorDuration = duration;
     }
 
-
-    /*
-     * Get low-power-indicator status when the indication is done thsi returns true
+    /**
+     * Get low-power-indicator status when the indication is done this returns true
      */
     bool getLowPowerIndicatorDone()
     {

usermods/Cronixie/usermod_cronixie.h

@@ -114,7 +114,7 @@ class UsermodCronixie : public Usermod {
       //W Week of Month | WW Week of Year
       //D Day of Week | DD Day Of Month | DDD Day Of Year
 
-      DEBUG_PRINT("cset ");
+      DEBUG_PRINT(F("cset "));
       DEBUG_PRINTLN(cronixieDisplay);
       
       for (int i = 0; i < 6; i++)
@@ -160,7 +160,7 @@ class UsermodCronixie : public Usermod {
           //case 'v': break; //user var1
         }
       }
-      DEBUG_PRINT("result ");
+      DEBUG_PRINT(F("result "));
       for (int i = 0; i < 5; i++)
       {
         DEBUG_PRINT((int)dP[i]);

usermods/DHT/usermod_dht.h

@@ -49,7 +49,7 @@
 #endif
 
 // how many seconds after boot to take first measurement, 90 seconds
-// 90 gives enough time to OTA update firmware if this crashses
+// 90 gives enough time to OTA update firmware if this crashes
 #ifndef USERMOD_DHT_FIRST_MEASUREMENT_AT
 #define USERMOD_DHT_FIRST_MEASUREMENT_AT 90000
 #endif

usermods/EXAMPLE_v2/usermod_v2_example.h

@@ -46,7 +46,7 @@ class MyExampleUsermod : public Usermod {
     static const char _enabled[];
 
 
-    // any private methods should go here (non-inline methosd should be defined out of class)
+    // any private methods should go here (non-inline method should be defined out of class)
     void publishMqtt(const char* state, bool retain = false); // example for publishing MQTT message
 
 
@@ -87,7 +87,7 @@ class MyExampleUsermod : public Usermod {
      * readFromConfig() is called prior to setup()
      * You can use it to initialize variables, sensors or similar.
      */
-    void setup() {
+    void setup() override {
       // do your set-up here
       //Serial.println("Hello from my usermod!");
       initDone = true;
@@ -98,7 +98,7 @@ class MyExampleUsermod : public Usermod {
      * connected() is called every time the WiFi is (re)connected
      * Use it to initialize network interfaces
      */
-    void connected() {
+    void connected() override {
       //Serial.println("Connected to WiFi!");
     }
 
@@ -113,7 +113,7 @@ class MyExampleUsermod : public Usermod {
      * 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
      *    Instead, use a timer check as shown here.
      */
-    void loop() {
+    void loop() override {
       // if usermod is disabled or called during strip updating just exit
       // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
       if (!enabled || strip.isUpdating()) return;
@@ -131,7 +131,7 @@ class MyExampleUsermod : public Usermod {
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
      * Below it is shown how this could be used for e.g. a light sensor
      */
-    void addToJsonInfo(JsonObject& root)
+    void addToJsonInfo(JsonObject& root) override
     {
       // if "u" object does not exist yet wee need to create it
       JsonObject user = root["u"];
@@ -156,7 +156,7 @@ class MyExampleUsermod : public Usermod {
      * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void addToJsonState(JsonObject& root)
+    void addToJsonState(JsonObject& root) override
     {
       if (!initDone || !enabled) return;  // prevent crash on boot applyPreset()
 
@@ -171,7 +171,7 @@ class MyExampleUsermod : public Usermod {
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void readFromJsonState(JsonObject& root)
+    void readFromJsonState(JsonObject& root) override
     {
       if (!initDone) return;  // prevent crash on boot applyPreset()
 
@@ -220,7 +220,7 @@ class MyExampleUsermod : public Usermod {
      * 
      * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
      */
-    void addToConfig(JsonObject& root)
+    void addToConfig(JsonObject& root) override
     {
       JsonObject top = root.createNestedObject(FPSTR(_name));
       top[FPSTR(_enabled)] = enabled;
@@ -253,7 +253,7 @@ class MyExampleUsermod : public Usermod {
      * 
      * This function is guaranteed to be called on boot, but could also be called every time settings are updated
      */
-    bool readFromConfig(JsonObject& root)
+    bool readFromConfig(JsonObject& root) override
     {
       // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
       // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
@@ -285,7 +285,7 @@ class MyExampleUsermod : public Usermod {
      * it may add additional metadata for certain entry fields (adding drop down is possible)
      * be careful not to add too much as oappend() buffer is limited to 3k
      */
-    void appendConfigData()
+    void appendConfigData() override
     {
       oappend(SET_F("addInfo('")); oappend(String(FPSTR(_name)).c_str()); oappend(SET_F(":great")); oappend(SET_F("',1,'<i>(this is a great config value)</i>');"));
       oappend(SET_F("addInfo('")); oappend(String(FPSTR(_name)).c_str()); oappend(SET_F(":testString")); oappend(SET_F("',1,'enter any string you want');"));
@@ -300,7 +300,7 @@ class MyExampleUsermod : public Usermod {
      * Use this to blank out some LEDs or set them to a different color regardless of the set effect mode.
      * Commonly used for custom clocks (Cronixie, 7 segment)
      */
-    void handleOverlayDraw()
+    void handleOverlayDraw() override
     {
       //strip.setPixelColor(0, RGBW32(0,0,0,0)) // set the first pixel to black
     }
@@ -311,7 +311,7 @@ class MyExampleUsermod : public Usermod {
      * will prevent button working in a default way.
      * Replicating button.cpp
      */
-    bool handleButton(uint8_t b) {
+    bool handleButton(uint8_t b) override {
       yield();
       // ignore certain button types as they may have other consequences
       if (!enabled
@@ -334,7 +334,7 @@ class MyExampleUsermod : public Usermod {
      * handling of MQTT message
      * topic only contains stripped topic (part after /wled/MAC)
      */
-    bool onMqttMessage(char* topic, char* payload) {
+    bool onMqttMessage(char* topic, char* payload) override {
       // check if we received a command
       //if (strlen(topic) == 8 && strncmp_P(topic, PSTR("/command"), 8) == 0) {
       //  String action = payload;
@@ -355,7 +355,7 @@ class MyExampleUsermod : public Usermod {
     /**
      * onMqttConnect() is called when MQTT connection is established
      */
-    void onMqttConnect(bool sessionPresent) {
+    void onMqttConnect(bool sessionPresent) override {
       // do any MQTT related initialisation here
       //publishMqtt("I am alive!");
     }
@@ -366,7 +366,7 @@ class MyExampleUsermod : public Usermod {
      * onStateChanged() is used to detect WLED state change
      * @mode parameter is CALL_MODE_... parameter used for notifications
      */
-    void onStateChange(uint8_t mode) {
+    void onStateChange(uint8_t mode) override {
       // do something if WLED state changed (color, brightness, effect, preset, etc)
     }
 
@@ -375,7 +375,7 @@ class MyExampleUsermod : public Usermod {
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
      * This could be used in the future for the system to determine whether your usermod is installed.
      */
-    uint16_t getId()
+    uint16_t getId() override
     {
       return USERMOD_ID_EXAMPLE;
     }

usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp

@@ -15,23 +15,23 @@ OneWire oneWire(13);
 DallasTemperature sensor(&oneWire);
 long temptimer = millis();
 long lastMeasure = 0;
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 
 // If display does not work or looks corrupted check the
 // constructor reference:
 // https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
 // or check the gallery:
 // https://github.com/olikraus/u8g2/wiki/gallery
-// --> First choise of cheap I2C OLED 128X32 0.91"
+// --> First choice of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
 // gets called once at boot. Do all initialization that doesn't depend on
 // network here
 void userSetup() {
   sensor.begin(); //Start Dallas temperature sensor
   u8x8.begin();
-  //u8x8.setFlipMode(1); //Uncoment if using WLED Wemos shield 
+  //u8x8.setFlipMode(1); //Un-comment if using WLED Wemos shield 
   u8x8.setPowerSave(0);
   u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
   u8x8.setFont(u8x8_font_chroma48medium8_r);
@@ -71,7 +71,7 @@ void userLoop() {
     if (mqtt != nullptr)
     {
       sensor.requestTemperatures();
-//Gets prefered temperature scale based on selection in definitions section
+//Gets preferred temperature scale based on selection in definitions section
       #ifdef Celsius
       float board_temperature = sensor.getTempCByIndex(0);
       #else
@@ -138,11 +138,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp

@@ -10,7 +10,7 @@
 
 void UpdateBME280Data();
 
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 BME280I2C bme;    // Default : forced mode, standby time = 1000 ms
                   // Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
 
@@ -20,14 +20,14 @@ uint8_t SDA_PIN = 21;
 #else //ESP8266 boards
 uint8_t SCL_PIN = 5;
 uint8_t SDA_PIN = 4;
-// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+// uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
 #endif
 
 //The SCL and SDA pins are defined here.
 //ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
 #define U8X8_PIN_SCL SCL_PIN
 #define U8X8_PIN_SDA SDA_PIN
-//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
+//#define U8X8_PIN_RESET RST_PIN // Un-comment for Heltec WiFi-Kit-8
 
 // If display does not work or looks corrupted check the
 // constructor reference:
@@ -36,9 +36,9 @@ uint8_t SDA_PIN = 4;
 // https://github.com/olikraus/u8g2/wiki/gallery
 // --> First choise of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
+// --> Third choice of Heltec WiFi-Kit-8 OLED 128X32 0.91"
 //U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
 // gets called once at boot. Do all initialization that doesn't depend on network here
 
@@ -181,11 +181,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

usermods/Fix_unreachable_netservices_v2/readme.md

@@ -2,7 +2,7 @@
 
 **Attention: This usermod compiles only for ESP8266**
 
-This usermod-v2 modification performs a ping request to a local IP address every 60 seconds. This ensures WLED net services remain accessible in some problematic WLAN environments.
+This usermod-v2 modification performs a ping request to a local IP address every 60 seconds. This ensures WLED net services remain accessible in some problematic WiFi environments.
 
 The modification works with static or DHCP IP address configuration.
 
@@ -24,7 +24,7 @@ The usermod supports the following state changes:
 
 | JSON key    | Value range      | Description                     |
 |-------------|------------------|---------------------------------|
-| PingDelayMs | 5000 to 18000000 | Deactivdate/activate the sensor |
+| PingDelayMs | 5000 to 18000000 | Deactivate/activate the sensor  |
 
  Changes also persist after a reboot.
 

usermods/INA226_v2/README.md

@@ -0,0 +1,77 @@
+# Usermod INA226
+
+This Usermod is designed to read values from an INA226 sensor and output the following:
+- Current
+- Voltage
+- Power
+- Shunt Voltage
+- Overflow status
+
+## Configuration
+
+The following settings can be configured in the Usermod Menu:
+- **Enabled**: Enable or disable the usermod.
+- **I2CAddress**: The I2C address in decimal. Default is 64 (0x40).
+- **CheckInterval**: Number of seconds between readings. This should be higher than the time it takes to make a reading, determined by the two next options.
+- **INASamples**: The number of samples to configure the INA226 to use for a measurement. Higher counts provide more accuracy. See the 'Understanding Samples and Conversion Times' section for more details.
+- **INAConversionTime**: The time to use on converting and preparing readings on the INA226. Higher times provide more precision. See the 'Understanding Samples and Conversion Times' section for more details.
+- **Decimals**: Number of decimals in the output.
+- **ShuntResistor**: Shunt resistor value in milliohms. An R100 shunt resistor should be written as "100", while R010 should be "10".
+- **CurrentRange**: Expected maximum current in milliamps (e.g., 5 A = 5000 mA).
+- **MqttPublish**: Enable or disable MQTT publishing.
+- **MqttPublishAlways**: Publish always, regardless if there is a change.
+- **MqttHomeAssistantDiscovery**: Enable Home Assistant discovery.
+
+## Dependencies
+
+These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+
+- Libraries
+  - `wollewald/INA226_WE@~1.2.9` (by [wollewald](https://registry.platformio.org/libraries/wollewald/INA226_WE))
+  - `Wire`
+
+## Understanding Samples and Conversion Times
+
+The INA226 uses a programmable ADC with configurable conversion times and averaging to optimize the measurement accuracy and speed. The conversion time and number of samples are determined based on the `INASamples` and `INAConversionTime` settings. The following table outlines the possible combinations:
+
+| Conversion Time (μs) | 1 Sample | 4 Samples | 16 Samples | 64 Samples | 128 Samples | 256 Samples | 512 Samples | 1024 Samples |
+|----------------------|----------|-----------|------------|------------|-------------|-------------|-------------|--------------|
+| 140                  | 0.28 ms  | 1.12 ms   | 4.48 ms    | 17.92 ms   | 35.84 ms    | 71.68 ms    | 143.36 ms   | 286.72 ms    |
+| 204                  | 0.408 ms | 1.632 ms  | 6.528 ms   | 26.112 ms  | 52.224 ms   | 104.448 ms  | 208.896 ms  | 417.792 ms   |
+| 332                  | 0.664 ms | 2.656 ms  | 10.624 ms  | 42.496 ms  | 84.992 ms   | 169.984 ms  | 339.968 ms  | 679.936 ms   |
+| 588                  | 1.176 ms | 4.704 ms  | 18.816 ms  | 75.264 ms  | 150.528 ms  | 301.056 ms  | 602.112 ms  | 1204.224 ms  |
+| 1100                 | 2.2 ms   | 8.8 ms    | 35.2 ms    | 140.8 ms   | 281.6 ms    | 563.2 ms    | 1126.4 ms   | 2252.8 ms    |
+| 2116                 | 4.232 ms | 16.928 ms | 67.712 ms  | 270.848 ms | 541.696 ms  | 1083.392 ms | 2166.784 ms | 4333.568 ms  |
+| 4156                 | 8.312 ms | 33.248 ms | 132.992 ms | 531.968 ms | 1063.936 ms | 2127.872 ms | 4255.744 ms | 8511.488 ms  |
+| 8244                 | 16.488 ms| 65.952 ms | 263.808 ms | 1055.232 ms| 2110.464 ms | 4220.928 ms | 8441.856 ms | 16883.712 ms |
+
+It is important to pick a combination that provides the needed balance between accuracy and precision while ensuring new readings within the `CheckInterval` setting. When `USERMOD_INA226_DEBUG` is defined, the info pane contains the expected time to make a reading, which can be seen in the table above.
+
+As an example, if you want a new reading every 5 seconds (`CheckInterval`), a valid combination is `256 samples` and `4156 μs` which would provide new values every 2.1 seconds.
+
+The picked values also slightly affect power usage. If the `CheckInterval` is set to more than 20 seconds, the INA226 is configured in `triggered` reading mode, where it only uses power as long as it's working. Then the conversion time and average samples counts determine how long the chip stays turned on every `CheckInterval` time.
+
+### Calculating Current and Power
+
+The INA226 calculates current by measuring the differential voltage across a shunt resistor and using the calibration register value to convert this measurement into current. Power is calculated by multiplying the current by the bus voltage.
+
+For detailed programming information and register configurations, refer to the [INA226 datasheet](https://www.ti.com/product/INA226).
+
+## Author
+[@LordMike](https://github.com/LordMike)
+
+## Compiling
+
+To enable, compile with `USERMOD_INA226` defined (e.g. in `platformio_override.ini`).
+
+```ini
+[env:ina226_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
+  ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9
+```

usermods/INA226_v2/platformio_override.ini

@@ -0,0 +1,9 @@
+[env:ina226_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
+  ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9

usermods/INA226_v2/usermod_ina226.h

@@ -0,0 +1,556 @@
+#pragma once
+
+#include "wled.h"
+#include <INA226_WE.h>
+
+#define INA226_ADDRESS 0x40 // Default I2C address for INA226
+
+#define DEFAULT_CHECKINTERVAL 60000
+#define DEFAULT_INASAMPLES 128
+#define DEFAULT_INASAMPLESENUM AVERAGE_128
+#define DEFAULT_INACONVERSIONTIME 1100
+#define DEFAULT_INACONVERSIONTIMEENUM CONV_TIME_1100
+
+// A packed version of all INA settings enums and their human friendly counterparts packed into a 32 bit structure
+// Some values are shifted and need to be preprocessed before usage
+struct InaSettingLookup
+{
+    uint16_t avgSamples : 11;          // Max 1024, which could be in 10 bits if we shifted by 1; if we somehow handle the edge case with "1"
+    uint8_t avgEnum : 4;               // Shift by 8 to get the INA226_AVERAGES value, accepts 0x00 to 0x0F, we need 0x00 to 0x0E
+    uint16_t convTimeUs : 14;          // We could save 2 bits by shifting this, but we won't save anything at present.
+    INA226_CONV_TIME convTimeEnum : 3; // Only the lowest 3 bits are defined in the conversion time enumerations
+};
+
+const InaSettingLookup _inaSettingsLookup[] = {
+    {1024, AVERAGE_1024 >> 8, 8244, CONV_TIME_8244},
+    {512, AVERAGE_512 >> 8, 4156, CONV_TIME_4156},
+    {256, AVERAGE_256 >> 8, 2116, CONV_TIME_2116},
+    {128, AVERAGE_128 >> 8, 1100, CONV_TIME_1100},
+    {64, AVERAGE_64 >> 8, 588, CONV_TIME_588},
+    {16, AVERAGE_16 >> 8, 332, CONV_TIME_332},
+    {4, AVERAGE_4 >> 8, 204, CONV_TIME_204},
+    {1, AVERAGE_1 >> 8, 140, CONV_TIME_140}};
+
+// Note: Will update the provided arg to be the correct value
+INA226_AVERAGES getAverageEnum(uint16_t &samples)
+{
+    for (const auto &setting : _inaSettingsLookup)
+    {
+        // If a user supplies 2000 samples, we serve up the highest possible value
+        if (samples >= setting.avgSamples)
+        {
+            samples = setting.avgSamples;
+            return static_cast<INA226_AVERAGES>(setting.avgEnum << 8);
+        }
+    }
+    // Default value if not found
+    samples = DEFAULT_INASAMPLES;
+    return DEFAULT_INASAMPLESENUM;
+}
+
+INA226_CONV_TIME getConversionTimeEnum(uint16_t &timeUs)
+{
+    for (const auto &setting : _inaSettingsLookup)
+    {
+        // If a user supplies 9000 μs, we serve up the highest possible value
+        if (timeUs >= setting.convTimeUs)
+        {
+            timeUs = setting.convTimeUs;
+            return setting.convTimeEnum;
+        }
+    }
+    // Default value if not found
+    timeUs = DEFAULT_INACONVERSIONTIME;
+    return DEFAULT_INACONVERSIONTIMEENUM;
+}
+
+class UsermodINA226 : public Usermod
+{
+private:
+    static const char _name[];
+
+    unsigned long _lastLoopCheck = 0;
+    unsigned long _lastTriggerTime = 0;
+
+    bool _settingEnabled : 1;                  // Enable the usermod
+    bool _mqttPublish : 1;                     // Publish MQTT values
+    bool _mqttPublishAlways : 1;               // Publish always, regardless if there is a change
+    bool _mqttHomeAssistant : 1;               // Enable Home Assistant docs
+    bool _initDone : 1;                        // Initialization is done
+    bool _isTriggeredOperationMode : 1;        // false = continuous, true = triggered
+    bool _measurementTriggered : 1;            // if triggered mode, then true indicates we're waiting for measurements
+    uint16_t _settingInaConversionTimeUs : 12; // Conversion time, shift by 2
+    uint16_t _settingInaSamples : 11;          // Number of samples for averaging, max 1024
+
+    uint8_t _i2cAddress;
+    uint16_t _checkInterval; // milliseconds, user settings is in seconds
+    float _decimalFactor;    // a power of 10 factor. 1 would be no change, 10 is one decimal, 100 is two etc. User sees a power of 10 (0, 1, 2, ..)
+    uint16_t _shuntResistor; // Shunt resistor value in milliohms
+    uint16_t _currentRange;  // Expected maximum current in milliamps
+
+    uint8_t _lastStatus = 0;
+    float _lastCurrent = 0;
+    float _lastVoltage = 0;
+    float _lastPower = 0;
+    float _lastShuntVoltage = 0;
+    bool _lastOverflow = false;
+
+#ifndef WLED_MQTT_DISABLE
+    float _lastCurrentSent = 0;
+    float _lastVoltageSent = 0;
+    float _lastPowerSent = 0;
+    float _lastShuntVoltageSent = 0;
+    bool _lastOverflowSent = false;
+#endif
+
+    INA226_WE *_ina226 = nullptr;
+
+    float truncateDecimals(float val)
+    {
+        return roundf(val * _decimalFactor) / _decimalFactor;
+    }
+
+    void initializeINA226()
+    {
+        if (_ina226 != nullptr)
+        {
+            delete _ina226;
+        }
+
+        _ina226 = new INA226_WE(_i2cAddress);
+        if (!_ina226->init())
+        {
+            DEBUG_PRINTLN(F("INA226 initialization failed!"));
+            return;
+        }
+        _ina226->setCorrectionFactor(1.0);
+
+        uint16_t tmpShort = _settingInaSamples;
+        _ina226->setAverage(getAverageEnum(tmpShort));
+
+        tmpShort = _settingInaConversionTimeUs << 2;
+        _ina226->setConversionTime(getConversionTimeEnum(tmpShort));
+
+        if (_checkInterval >= 20000)
+        {
+            _isTriggeredOperationMode = true;
+            _ina226->setMeasureMode(TRIGGERED);
+        }
+        else
+        {
+            _isTriggeredOperationMode = false;
+            _ina226->setMeasureMode(CONTINUOUS);
+        }
+
+        _ina226->setResistorRange(static_cast<float>(_shuntResistor) / 1000.0, static_cast<float>(_currentRange) / 1000.0);
+    }
+
+    void fetchAndPushValues()
+    {
+        _lastStatus = _ina226->getI2cErrorCode();
+
+        if (_lastStatus != 0)
+            return;
+
+        float current = truncateDecimals(_ina226->getCurrent_mA() / 1000.0);
+        float voltage = truncateDecimals(_ina226->getBusVoltage_V());
+        float power = truncateDecimals(_ina226->getBusPower() / 1000.0);
+        float shuntVoltage = truncateDecimals(_ina226->getShuntVoltage_V());
+        bool overflow = _ina226->overflow;
+
+#ifndef WLED_DISABLE_MQTT
+        mqttPublishIfChanged(F("current"), _lastCurrentSent, current, 0.01f);
+        mqttPublishIfChanged(F("voltage"), _lastVoltageSent, voltage, 0.01f);
+        mqttPublishIfChanged(F("power"), _lastPowerSent, power, 0.1f);
+        mqttPublishIfChanged(F("shunt_voltage"), _lastShuntVoltageSent, shuntVoltage, 0.01f);
+        mqttPublishIfChanged(F("overflow"), _lastOverflowSent, overflow);
+#endif
+
+        _lastCurrent = current;
+        _lastVoltage = voltage;
+        _lastPower = power;
+        _lastShuntVoltage = shuntVoltage;
+        _lastOverflow = overflow;
+    }
+
+    void handleTriggeredMode(unsigned long currentTime)
+    {
+        if (_measurementTriggered)
+        {
+            // Test if we have a measurement every 400ms
+            if (currentTime - _lastTriggerTime >= 400)
+            {
+                _lastTriggerTime = currentTime;
+                if (_ina226->isBusy())
+                    return;
+
+                fetchAndPushValues();
+                _measurementTriggered = false;
+            }
+        }
+        else
+        {
+            if (currentTime - _lastLoopCheck >= _checkInterval)
+            {
+                // Start a measurement and use isBusy() later to determine when it is done
+                _ina226->startSingleMeasurementNoWait();
+                _lastLoopCheck = currentTime;
+                _lastTriggerTime = currentTime;
+                _measurementTriggered = true;
+            }
+        }
+    }
+
+    void handleContinuousMode(unsigned long currentTime)
+    {
+        if (currentTime - _lastLoopCheck >= _checkInterval)
+        {
+            _lastLoopCheck = currentTime;
+            fetchAndPushValues();
+        }
+    }
+
+    ~UsermodINA226()
+    {
+        delete _ina226;
+        _ina226 = nullptr;
+    }
+
+#ifndef WLED_DISABLE_MQTT
+    void mqttInitialize()
+    {
+        if (!WLED_MQTT_CONNECTED || !_mqttPublish || !_mqttHomeAssistant)
+            return;
+
+        char topic[128];
+        snprintf_P(topic, 127, "%s/current", mqttDeviceTopic);
+        mqttCreateHassSensor(F("Current"), topic, F("current"), F("A"));
+
+        snprintf_P(topic, 127, "%s/voltage", mqttDeviceTopic);
+        mqttCreateHassSensor(F("Voltage"), topic, F("voltage"), F("V"));
+
+        snprintf_P(topic, 127, "%s/power", mqttDeviceTopic);
+        mqttCreateHassSensor(F("Power"), topic, F("power"), F("W"));
+
+        snprintf_P(topic, 127, "%s/shunt_voltage", mqttDeviceTopic);
+        mqttCreateHassSensor(F("Shunt Voltage"), topic, F("voltage"), F("V"));
+
+        snprintf_P(topic, 127, "%s/overflow", mqttDeviceTopic);
+        mqttCreateHassBinarySensor(F("Overflow"), topic);
+    }
+
+    void mqttPublishIfChanged(const __FlashStringHelper *topic, float &lastState, float state, float minChange)
+    {
+        if (WLED_MQTT_CONNECTED && _mqttPublish && (_mqttPublishAlways || fabsf(lastState - state) > minChange))
+        {
+            char subuf[128];
+            snprintf_P(subuf, 127, PSTR("%s/%s"), mqttDeviceTopic, (const char *)topic);
+            mqtt->publish(subuf, 0, false, String(state).c_str());
+
+            lastState = state;
+        }
+    }
+
+    void mqttPublishIfChanged(const __FlashStringHelper *topic, bool &lastState, bool state)
+    {
+        if (WLED_MQTT_CONNECTED && _mqttPublish && (_mqttPublishAlways || lastState != state))
+        {
+            char subuf[128];
+            snprintf_P(subuf, 127, PSTR("%s/%s"), mqttDeviceTopic, (const char *)topic);
+            mqtt->publish(subuf, 0, false, state ? "true" : "false");
+
+            lastState = state;
+        }
+    }
+
+    void mqttCreateHassSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+    {
+        String t = String(F("homeassistant/sensor/")) + mqttClientID + "/" + name + F("/config");
+
+        StaticJsonDocument<600> doc;
+
+        doc[F("name")] = name;
+        doc[F("state_topic")] = topic;
+        doc[F("unique_id")] = String(mqttClientID) + name;
+        if (unitOfMeasurement != "")
+            doc[F("unit_of_measurement")] = unitOfMeasurement;
+        if (deviceClass != "")
+            doc[F("device_class")] = deviceClass;
+        doc[F("expire_after")] = 1800;
+
+        JsonObject device = doc.createNestedObject(F("device"));
+        device[F("name")] = serverDescription;
+        device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+        device[F("manufacturer")] = F(WLED_BRAND);
+        device[F("model")] = F(WLED_PRODUCT_NAME);
+        device[F("sw_version")] = versionString;
+
+        String temp;
+        serializeJson(doc, temp);
+        DEBUG_PRINTLN(t);
+        DEBUG_PRINTLN(temp);
+
+        mqtt->publish(t.c_str(), 0, true, temp.c_str());
+    }
+
+    void mqttCreateHassBinarySensor(const String &name, const String &topic)
+    {
+        String t = String(F("homeassistant/binary_sensor/")) + mqttClientID + "/" + name + F("/config");
+
+        StaticJsonDocument<600> doc;
+
+        doc[F("name")] = name;
+        doc[F("state_topic")] = topic;
+        doc[F("unique_id")] = String(mqttClientID) + name;
+
+        JsonObject device = doc.createNestedObject(F("device"));
+        device[F("name")] = serverDescription;
+        device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+        device[F("manufacturer")] = F(WLED_BRAND);
+        device[F("model")] = F(WLED_PRODUCT_NAME);
+        device[F("sw_version")] = versionString;
+
+        String temp;
+        serializeJson(doc, temp);
+        DEBUG_PRINTLN(t);
+        DEBUG_PRINTLN(temp);
+
+        mqtt->publish(t.c_str(), 0, true, temp.c_str());
+    }
+#endif
+
+public:
+    UsermodINA226()
+    {
+        // Default values
+        _settingInaSamples = DEFAULT_INASAMPLES;
+        _settingInaConversionTimeUs = DEFAULT_INACONVERSIONTIME;
+
+        _i2cAddress = INA226_ADDRESS;
+        _checkInterval = DEFAULT_CHECKINTERVAL;
+        _decimalFactor = 100;
+        _shuntResistor = 1000;
+        _currentRange = 1000;
+    }
+
+    void setup()
+    {
+        initializeINA226();
+    }
+
+    void loop()
+    {
+        if (!_settingEnabled || strip.isUpdating())
+            return;
+
+        unsigned long currentTime = millis();
+
+        if (_isTriggeredOperationMode)
+        {
+            handleTriggeredMode(currentTime);
+        }
+        else
+        {
+            handleContinuousMode(currentTime);
+        }
+    }
+
+#ifndef WLED_DISABLE_MQTT
+    void onMqttConnect(bool sessionPresent)
+    {
+        mqttInitialize();
+    }
+#endif
+
+    uint16_t getId()
+    {
+        return USERMOD_ID_INA226;
+    }
+
+    void addToJsonInfo(JsonObject &root) override
+    {
+        JsonObject user = root["u"];
+        if (user.isNull())
+            user = root.createNestedObject("u");
+
+#ifdef USERMOD_INA226_DEBUG
+        JsonArray temp = user.createNestedArray(F("INA226 last loop"));
+        temp.add(_lastLoopCheck);
+
+        temp = user.createNestedArray(F("INA226 last status"));
+        temp.add(_lastStatus);
+
+        temp = user.createNestedArray(F("INA226 average samples"));
+        temp.add(_settingInaSamples);
+        temp.add(F("samples"));
+
+        temp = user.createNestedArray(F("INA226 conversion time"));
+        temp.add(_settingInaConversionTimeUs << 2);
+        temp.add(F("μs"));
+
+        // INA226 uses (2 * conversion time * samples) time to take a reading.
+        temp = user.createNestedArray(F("INA226 expected sample time"));
+        uint32_t sampleTimeNeededUs = (static_cast<uint32_t>(_settingInaConversionTimeUs) << 2) * _settingInaSamples * 2;
+        temp.add(truncateDecimals(sampleTimeNeededUs / 1000.0));
+        temp.add(F("ms"));
+
+        temp = user.createNestedArray(F("INA226 mode"));
+        temp.add(_isTriggeredOperationMode ? F("triggered") : F("continuous"));
+
+        if (_isTriggeredOperationMode)
+        {
+            temp = user.createNestedArray(F("INA226 triggered"));
+            temp.add(_measurementTriggered ? F("waiting for measurement") : F(""));
+        }
+#endif
+
+        JsonArray jsonCurrent = user.createNestedArray(F("Current"));
+        JsonArray jsonVoltage = user.createNestedArray(F("Voltage"));
+        JsonArray jsonPower = user.createNestedArray(F("Power"));
+        JsonArray jsonShuntVoltage = user.createNestedArray(F("Shunt Voltage"));
+        JsonArray jsonOverflow = user.createNestedArray(F("Overflow"));
+
+        if (_lastLoopCheck == 0)
+        {
+            jsonCurrent.add(F("Not read yet"));
+            jsonVoltage.add(F("Not read yet"));
+            jsonPower.add(F("Not read yet"));
+            jsonShuntVoltage.add(F("Not read yet"));
+            jsonOverflow.add(F("Not read yet"));
+            return;
+        }
+
+        if (_lastStatus != 0)
+        {
+            jsonCurrent.add(F("An error occurred"));
+            jsonVoltage.add(F("An error occurred"));
+            jsonPower.add(F("An error occurred"));
+            jsonShuntVoltage.add(F("An error occurred"));
+            jsonOverflow.add(F("An error occurred"));
+            return;
+        }
+
+        jsonCurrent.add(_lastCurrent);
+        jsonCurrent.add(F("A"));
+
+        jsonVoltage.add(_lastVoltage);
+        jsonVoltage.add(F("V"));
+
+        jsonPower.add(_lastPower);
+        jsonPower.add(F("W"));
+
+        jsonShuntVoltage.add(_lastShuntVoltage);
+        jsonShuntVoltage.add(F("V"));
+
+        jsonOverflow.add(_lastOverflow ? F("true") : F("false"));
+    }
+
+    void addToConfig(JsonObject &root)
+    {
+        JsonObject top = root.createNestedObject(FPSTR(_name));
+        top[F("Enabled")] = _settingEnabled;
+        top[F("I2CAddress")] = static_cast<uint8_t>(_i2cAddress);
+        top[F("CheckInterval")] = _checkInterval / 1000;
+        top[F("INASamples")] = _settingInaSamples;
+        top[F("INAConversionTime")] = _settingInaConversionTimeUs << 2;
+        top[F("Decimals")] = log10f(_decimalFactor);
+        top[F("ShuntResistor")] = _shuntResistor;
+        top[F("CurrentRange")] = _currentRange;
+#ifndef WLED_DISABLE_MQTT
+        top[F("MqttPublish")] = _mqttPublish;
+        top[F("MqttPublishAlways")] = _mqttPublishAlways;
+        top[F("MqttHomeAssistantDiscovery")] = _mqttHomeAssistant;
+#endif
+
+        DEBUG_PRINTLN(F("INA226 config saved."));
+    }
+
+    bool readFromConfig(JsonObject &root) override
+    {
+        JsonObject top = root[FPSTR(_name)];
+
+        bool configComplete = !top.isNull();
+        if (!configComplete)
+            return false;
+
+        bool tmpBool;
+        if (getJsonValue(top[F("Enabled")], tmpBool))
+            _settingEnabled = tmpBool;
+        else
+            configComplete = false;
+
+        configComplete &= getJsonValue(top[F("I2CAddress")], _i2cAddress);
+        if (getJsonValue(top[F("CheckInterval")], _checkInterval))
+        {
+            if (1 <= _checkInterval && _checkInterval <= 600)
+                _checkInterval *= 1000;
+            else
+                _checkInterval = DEFAULT_CHECKINTERVAL;
+        }
+        else
+            configComplete = false;
+
+        uint16_t tmpShort;
+        if (getJsonValue(top[F("INASamples")], tmpShort))
+        {
+            // The method below will fix the provided value to a valid one
+            getAverageEnum(tmpShort);
+            _settingInaSamples = tmpShort;
+        }
+        else
+            configComplete = false;
+
+        if (getJsonValue(top[F("INAConversionTime")], tmpShort))
+        {
+            // The method below will fix the provided value to a valid one
+            getConversionTimeEnum(tmpShort);
+            _settingInaConversionTimeUs = tmpShort >> 2;
+        }
+        else
+            configComplete = false;
+
+        if (getJsonValue(top[F("Decimals")], _decimalFactor))
+        {
+            if (0 <= _decimalFactor && _decimalFactor <= 5)
+                _decimalFactor = pow10f(_decimalFactor);
+            else
+                _decimalFactor = 100;
+        }
+        else
+            configComplete = false;
+
+        configComplete &= getJsonValue(top[F("ShuntResistor")], _shuntResistor);
+        configComplete &= getJsonValue(top[F("CurrentRange")], _currentRange);
+
+#ifndef WLED_DISABLE_MQTT
+        if (getJsonValue(top[F("MqttPublish")], tmpBool))
+            _mqttPublish = tmpBool;
+        else
+            configComplete = false;
+
+        if (getJsonValue(top[F("MqttPublishAlways")], tmpBool))
+            _mqttPublishAlways = tmpBool;
+        else
+            configComplete = false;
+
+        if (getJsonValue(top[F("MqttHomeAssistantDiscovery")], tmpBool))
+            _mqttHomeAssistant = tmpBool;
+        else
+            configComplete = false;
+#endif
+
+        if (_initDone)
+        {
+            initializeINA226();
+
+#ifndef WLED_DISABLE_MQTT
+            mqttInitialize();
+#endif
+        }
+
+        _initDone = true;
+        return configComplete;
+    }
+};
+
+const char UsermodINA226::_name[] PROGMEM = "INA226";

usermods/Internal_Temperature_v2/readme.md

@@ -0,0 +1,17 @@
+# Internal Temperature Usermod
+This usermod adds the temperature readout to the Info tab and also publishes that over the topic `mcutemp` topic.
+
+## Important
+A shown temp of 53,33°C might indicate that the internal temp is not supported.
+
+ESP8266 does not have a internal temp sensor
+
+ESP32S2 seems to crash on reading the sensor -> disabled
+
+## Installation
+Add a build flag `-D USERMOD_INTERNAL_TEMPERATURE` to your `platformio.ini` (or `platformio_override.ini`).
+
+## Authors
+Soeren Willrodt [@lost-hope](https://github.com/lost-hope)
+
+Dimitry Zhemkov [@dima-zhemkov](https://github.com/dima-zhemkov)

usermods/Internal_Temperature_v2/usermod_internal_temperature.h

@@ -0,0 +1,117 @@
+#pragma once
+
+#include "wled.h"
+
+class InternalTemperatureUsermod : public Usermod
+{
+
+private:
+  unsigned long loopInterval = 10000;
+  unsigned long lastTime = 0;
+  bool isEnabled = false;
+  float temperature = 0;
+
+  static const char _name[];
+  static const char _enabled[];
+  static const char _loopInterval[];
+
+  // any private methods should go here (non-inline method should be defined out of class)
+  void publishMqtt(const char *state, bool retain = false); // example for publishing MQTT message
+
+public:
+  void setup()
+  {
+  }
+
+  void loop()
+  {
+    // if usermod is disabled or called during strip updating just exit
+    // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
+    if (!isEnabled || strip.isUpdating() || millis() - lastTime <= loopInterval)
+      return;
+
+    lastTime = millis();
+
+#ifdef ESP8266 // ESP8266
+    // does not seem possible
+    temperature = -1;
+#elif defined(CONFIG_IDF_TARGET_ESP32S2) // ESP32S2
+    temperature = -1;
+#else                                    // ESP32 ESP32S3 and ESP32C3
+    temperature = roundf(temperatureRead() * 10) / 10;
+#endif
+
+#ifndef WLED_DISABLE_MQTT
+    if (WLED_MQTT_CONNECTED)
+    {
+      char array[10];
+      snprintf(array, sizeof(array), "%f", temperature);
+      publishMqtt(array);
+    }
+#endif
+  }
+
+  void addToJsonInfo(JsonObject &root)
+  {
+    if (!isEnabled)
+      return;
+
+    // if "u" object does not exist yet wee need to create it
+    JsonObject user = root["u"];
+    if (user.isNull())
+      user = root.createNestedObject("u");
+
+    JsonArray userTempArr = user.createNestedArray(FPSTR(_name));
+    userTempArr.add(temperature);
+    userTempArr.add(F(" °C"));
+
+    // if "sensor" object does not exist yet wee need to create it
+    JsonObject sensor = root[F("sensor")];
+    if (sensor.isNull())
+      sensor = root.createNestedObject(F("sensor"));
+
+    JsonArray sensorTempArr = sensor.createNestedArray(FPSTR(_name));
+    sensorTempArr.add(temperature);
+    sensorTempArr.add(F("°C"));
+  }
+
+  void addToConfig(JsonObject &root)
+  {
+    JsonObject top = root.createNestedObject(FPSTR(_name));
+    top[FPSTR(_enabled)] = isEnabled;
+    top[FPSTR(_loopInterval)] = loopInterval;
+  }
+
+  bool readFromConfig(JsonObject &root)
+  {
+    JsonObject top = root[FPSTR(_name)];
+    bool configComplete = !top.isNull();
+    configComplete &= getJsonValue(top[FPSTR(_enabled)], isEnabled);
+    configComplete &= getJsonValue(top[FPSTR(_loopInterval)], loopInterval);
+
+    return configComplete;
+  }
+
+  uint16_t getId()
+  {
+    return USERMOD_ID_INTERNAL_TEMPERATURE;
+  }
+};
+
+const char InternalTemperatureUsermod::_name[] PROGMEM = "Internal Temperature";
+const char InternalTemperatureUsermod::_enabled[] PROGMEM = "Enabled";
+const char InternalTemperatureUsermod::_loopInterval[] PROGMEM = "Loop Interval";
+
+void InternalTemperatureUsermod::publishMqtt(const char *state, bool retain)
+{
+#ifndef WLED_DISABLE_MQTT
+  // Check if MQTT Connected, otherwise it will crash the 8266
+  if (WLED_MQTT_CONNECTED)
+  {
+    char subuf[64];
+    strcpy(subuf, mqttDeviceTopic);
+    strcat_P(subuf, PSTR("/mcutemp"));
+    mqtt->publish(subuf, 0, retain, state);
+  }
+#endif
+}

usermods/LD2410_v2/readme.md

@@ -0,0 +1,36 @@
+# BH1750 usermod
+
+> This usermod requires a second UART and was only tested on the ESP32
+
+
+This usermod will read from a LD2410 movement/presence sensor.
+
+The movement and presence state are displayed in both the Info section of the web UI, as well as published to the `/movement` and `/stationary` MQTT topics respectively.
+
+## Dependencies
+- Libraries
+  - `ncmreynolds/ld2410@^0.1.3`
+  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
+- Data is published over MQTT - make sure you've enabled the MQTT sync interface.
+
+## Compilation
+
+To enable, compile with `USERMOD_LD2410` defined  (e.g. in `platformio_override.ini`)
+```ini
+[env:usermod_USERMOD_LD2410_esp32dev]
+extends = env:esp32dev
+build_flags =
+    ${common.build_flags_esp32}
+    -D USERMOD_LD2410
+lib_deps = 
+    ${esp32.lib_deps}
+    ncmreynolds/ld2410@^0.1.3
+```
+
+### Configuration Options
+The Usermod screen allows you to:
+- enable/disable the usermod
+- Configure the RX/TX pins
+
+## Change log
+-  2024-06 Created by @wesleygas (https://github.com/wesleygas/)

usermods/LD2410_v2/usermod_ld2410.h

@@ -0,0 +1,237 @@
+#warning **** Included USERMOD_LD2410 ****
+
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
+#pragma once
+
+#include "wled.h"
+#include <ld2410.h>
+
+class LD2410Usermod : public Usermod {
+
+  private:
+
+    bool enabled = true;
+    bool initDone = false;
+    bool sensorFound = false;
+    unsigned long lastTime = 0;
+    unsigned long last_mqtt_sent = 0;
+
+    int8_t default_uart_rx = 19;
+    int8_t default_uart_tx = 18;
+
+
+    String mqttMovementTopic = F("");
+    String mqttStationaryTopic = F("");
+    bool mqttInitialized = false;
+    bool HomeAssistantDiscovery = true; // Publish Home Assistant Discovery messages
+
+
+    ld2410 radar;
+    bool stationary_detected = false;
+    bool last_stationary_state = false;
+    bool movement_detected = false;
+    bool last_movement_state = false;
+
+    // These config variables have defaults set inside readFromConfig()
+    int8_t uart_rx_pin;
+    int8_t uart_tx_pin;
+
+    // string that are used multiple time (this will save some flash memory)
+    static const char _name[];
+    static const char _enabled[];
+
+    void publishMqtt(const char* topic, const char* state, bool retain); // example for publishing MQTT message
+
+    void _mqttInitialize()
+    {
+      mqttMovementTopic = String(mqttDeviceTopic) + F("/ld2410/movement");
+      mqttStationaryTopic = String(mqttDeviceTopic) + F("/ld2410/stationary");
+      if (HomeAssistantDiscovery){
+        _createMqttSensor(F("Movement"), mqttMovementTopic, F("motion"), F(""));
+        _createMqttSensor(F("Stationary"), mqttStationaryTopic, F("occupancy"), F(""));
+      } 
+    }
+
+    // Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
+    void _createMqttSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+    {
+      String t = String(F("homeassistant/binary_sensor/")) + mqttClientID + F("/") + name + F("/config");
+      
+      StaticJsonDocument<600> doc;
+      
+      doc[F("name")] = String(serverDescription) + F(" Module");
+      doc[F("state_topic")] = topic;
+      doc[F("unique_id")] = String(mqttClientID) + name;
+      if (unitOfMeasurement != "")
+        doc[F("unit_of_measurement")] = unitOfMeasurement;
+      if (deviceClass != "")
+        doc[F("device_class")] = deviceClass;
+      doc[F("expire_after")] = 1800;
+      doc[F("payload_off")] = "OFF";
+      doc[F("payload_on")] = "ON";
+
+      JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
+      device[F("name")] = serverDescription;
+      device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+      device[F("manufacturer")] = F("WLED");
+      device[F("model")] = F("FOSS");
+      device[F("sw_version")] = versionString;
+
+      String temp;
+      serializeJson(doc, temp);
+      DEBUG_PRINTLN(t);
+      DEBUG_PRINTLN(temp);
+
+      mqtt->publish(t.c_str(), 0, true, temp.c_str());
+    }
+
+  public:
+
+    inline bool isEnabled() { return enabled; }
+
+    void setup() {
+      Serial1.begin(256000, SERIAL_8N1, uart_rx_pin, uart_tx_pin);
+      Serial.print(F("\nLD2410 radar sensor initialising: "));
+      if(radar.begin(Serial1)){
+        Serial.println(F("OK"));
+      } else {
+        Serial.println(F("not connected"));
+      }
+      initDone = true;
+    }
+
+
+    void loop() {
+      // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
+      if (!enabled || strip.isUpdating()) return;
+      radar.read();
+      unsigned long curr_time = millis();
+      if(curr_time - lastTime > 1000)  //Try to Report every 1000ms
+      {
+        lastTime = curr_time;
+        sensorFound = radar.isConnected();
+        if(!sensorFound) return;
+        stationary_detected = radar.presenceDetected();
+        if(stationary_detected != last_stationary_state){
+          if (WLED_MQTT_CONNECTED){
+            publishMqtt("/ld2410/stationary", stationary_detected ? "ON":"OFF", false);
+            last_stationary_state = stationary_detected;
+          }
+        }
+        movement_detected = radar.movingTargetDetected();
+        if(movement_detected != last_movement_state){
+          if (WLED_MQTT_CONNECTED){
+            publishMqtt("/ld2410/movement", movement_detected ? "ON":"OFF", false);
+            last_movement_state = movement_detected;
+          }
+        }
+        // If there hasn't been any activity, send current state to confirm sensor is alive
+        if(curr_time - last_mqtt_sent > 1000*60*5 && WLED_MQTT_CONNECTED){
+          publishMqtt("/ld2410/stationary", stationary_detected ? "ON":"OFF", false);
+          publishMqtt("/ld2410/movement", movement_detected ? "ON":"OFF", false);
+        }
+      }
+    }
+
+
+    void addToJsonInfo(JsonObject& root)
+    {
+      // if "u" object does not exist yet wee need to create it
+      JsonObject user = root[F("u")];
+      if (user.isNull()) user = root.createNestedObject(F("u"));
+
+      JsonArray ld2410_sta_json = user.createNestedArray(F("LD2410 Stationary"));
+      JsonArray ld2410_mov_json = user.createNestedArray(F("LD2410 Movement"));
+      if (!enabled){
+        ld2410_sta_json.add(F("disabled"));
+        ld2410_mov_json.add(F("disabled"));
+      } else if(!sensorFound){
+        ld2410_sta_json.add(F("LD2410"));
+        ld2410_sta_json.add(" Not Found");
+      } else {
+        ld2410_sta_json.add("Sta ");
+        ld2410_sta_json.add(stationary_detected ? "ON":"OFF");
+        ld2410_mov_json.add("Mov ");
+        ld2410_mov_json.add(movement_detected ? "ON":"OFF");
+      }
+    }
+
+    void addToConfig(JsonObject& root)
+    {
+      JsonObject top = root.createNestedObject(FPSTR(_name));
+      top[FPSTR(_enabled)] = enabled;
+      //save these vars persistently whenever settings are saved
+      top["uart_rx_pin"] = default_uart_rx;
+      top["uart_tx_pin"] = default_uart_tx;
+    }
+
+
+    bool readFromConfig(JsonObject& root)
+    {
+      // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
+      // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
+
+      JsonObject top = root[FPSTR(_name)];
+
+      bool configComplete = !top.isNull();
+      if (!configComplete)
+      {
+        DEBUG_PRINT(FPSTR(_name));
+        DEBUG_PRINT(F("LD2410"));
+        DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
+        return false;
+      }
+
+      configComplete &= getJsonValue(top["uart_rx_pin"], uart_rx_pin, default_uart_rx);
+      configComplete &= getJsonValue(top["uart_tx_pin"], uart_tx_pin, default_uart_tx);
+
+      return configComplete;
+    }
+
+
+#ifndef WLED_DISABLE_MQTT
+    /**
+     * onMqttConnect() is called when MQTT connection is established
+     */
+    void onMqttConnect(bool sessionPresent) {
+      // do any MQTT related initialisation here
+      if(!radar.isConnected()) return;
+      publishMqtt("/ld2410/status", "I am alive!", false);
+      if (!mqttInitialized)
+      {
+        _mqttInitialize();
+        mqttInitialized = true;
+      }
+    }
+#endif
+
+    uint16_t getId()
+    {
+      return USERMOD_ID_LD2410;
+    }
+};
+
+
+// add more strings here to reduce flash memory usage
+const char LD2410Usermod::_name[]    PROGMEM = "LD2410Usermod";
+const char LD2410Usermod::_enabled[] PROGMEM = "enabled";
+
+
+// implementation of non-inline member methods
+
+void LD2410Usermod::publishMqtt(const char* topic, const char* state, bool retain)
+{
+#ifndef WLED_DISABLE_MQTT
+  //Check if MQTT Connected, otherwise it will crash
+  if (WLED_MQTT_CONNECTED) {
+    last_mqtt_sent = millis();
+    char subuf[64];
+    strcpy(subuf, mqttDeviceTopic);
+    strcat(subuf, topic);
+    mqtt->publish(subuf, 0, retain, state);
+  }
+#endif
+}

usermods/LDR_Dusk_Dawn_v2/README.md

@@ -0,0 +1,26 @@
+# LDR_Dusk_Dawn_v2
+This usermod will obtain readings from a Light Dependent Resistor (LDR) and will turn on/off specific presets based on those readings. This is useful for exterior lighting situations where you want the lights to only be on when it is dark out.
+
+# Installation
+Add "-D USERMOD_LDR_DUSK_DAWN" to your platformio.ini [common] build_flags and build.
+
+Example:
+```
+[common]
+build_flags =
+  -D USERMOD_LDR_DUSK_DAWN   # Enable LDR Dusk Dawn Usermod
+```
+
+# Usermod Settings
+Setting | Description | Default
+--- | --- | ---
+Enabled | Enable/Disable the LDR functionality. | Disabled
+LDR Pin | The analog capable pin your LDR is connected to. | 34
+Threshold Minutes | The number of minutes of consistent readings above/below the on/off threshold before the LED state will change. | 5
+Threshold | The analog read value threshold from the LDR. Readings lower than this number will count towards changing the LED state to off. You can see the current LDR reading by going into the info section when LDR functionality is enabled. | 1000
+On Preset | The WLED preset to be used for the LED on state. | 1
+Off Preset | The WLED preset to be used for the LED off state. | 2
+
+## Author
+[@jeffwdh](https://github.com/jeffwdh)  
+jeffwdh@tarball.ca

usermods/LDR_Dusk_Dawn_v2/usermod_LDR_Dusk_Dawn_v2.h

@@ -0,0 +1,153 @@
+#pragma once
+#include "wled.h"
+
+#ifndef ARDUINO_ARCH_ESP32
+  // 8266 does not support analogRead on user selectable pins 
+  #error only ESP32 is supported by usermod LDR_DUSK_DAWN
+#endif
+
+class LDR_Dusk_Dawn_v2 : public Usermod {
+  private:
+    // Defaults
+    bool ldrEnabled = false;
+    int ldrPin = 34; //A2 on Adafruit Huzzah32
+    int ldrThresholdMinutes = 5; // How many minutes of readings above/below threshold until it switches LED state
+    int ldrThreshold = 1000; // Readings higher than this number will turn off LED. 
+    int ldrOnPreset = 1; // Default "On" Preset
+    int ldrOffPreset = 2; // Default "Off" Preset
+
+    // Variables
+    bool initDone = false;
+    bool ldrEnabledPreviously = false; // Was LDR enabled for the previous check? First check is always no.
+    int ldrOffCount; // Number of readings above the threshold
+    int ldrOnCount; // Number of readings below the threshold
+    int ldrReading = 0; // Last LDR reading
+    int ldrLEDState; // Current LED on/off state
+    unsigned long lastMillis = 0;
+    static const char _name[];
+
+  public:
+    void setup() {
+      // register ldrPin
+      if ((ldrPin >= 0) && (digitalPinToAnalogChannel(ldrPin) >= 0)) {
+        if(!pinManager.allocatePin(ldrPin, false, PinOwner::UM_LDR_DUSK_DAWN)) ldrEnabled = false; // pin already in use -> disable usermod
+        else pinMode(ldrPin, INPUT);                                                               // alloc success -> configure pin for input
+      } else ldrEnabled = false;                                                                   // invalid pin -> disable usermod
+      initDone = true;
+    }
+
+    void loop() {
+      // Only update every 10 seconds
+      if (millis() - lastMillis > 10000) {      
+        if (  (ldrEnabled == true)
+           && (ldrPin >= 0) && (digitalPinToAnalogChannel(ldrPin) >= 0) ) { // make sure that pin is valid for analogread()
+          // Default state is off
+          if (ldrEnabledPreviously == false) {
+              applyPreset(ldrOffPreset);
+              ldrEnabledPreviously = true;
+              ldrLEDState = 0;
+          }
+
+          // Get LDR reading and increment counter by number of seconds since last read
+          ldrReading = analogRead(ldrPin);
+          if (ldrReading <= ldrThreshold) {
+            ldrOnCount = ldrOnCount + 10;
+            ldrOffCount = 0;
+          } else {
+            ldrOffCount = ldrOffCount + 10;
+            ldrOnCount = 0;
+          }
+
+          if (ldrOnCount >= (ldrThresholdMinutes * 60)) {
+            ldrOnCount = 0;
+            // If LEDs were previously off, turn on
+            if (ldrLEDState == 0) {
+              applyPreset(ldrOnPreset);
+              ldrLEDState = 1;
+            }
+          }
+
+          if (ldrOffCount >= (ldrThresholdMinutes * 60)) {
+            ldrOffCount = 0;
+            // If LEDs were previously on, turn off
+            if (ldrLEDState == 1) {
+              applyPreset(ldrOffPreset);
+              ldrLEDState = 0;
+            }
+          }
+        } else {
+          // LDR is disabled, reset variables to default
+          ldrReading = 0;
+          ldrOnCount = 0;
+          ldrOffCount = 0;
+          ldrLEDState = 0;
+          ldrEnabledPreviously = false;
+        }
+        lastMillis = millis();
+      }
+    }
+
+  void addToConfig(JsonObject& root) {
+      JsonObject top = root.createNestedObject(FPSTR(_name));
+      top["Enabled"] = ldrEnabled;
+      top["LDR Pin"] = ldrPin;
+      top["Threshold Minutes"] = ldrThresholdMinutes;
+      top["Threshold"] = ldrThreshold;
+      top["On Preset"] = ldrOnPreset;
+      top["Off Preset"] = ldrOffPreset;
+  }
+
+  bool readFromConfig(JsonObject& root) {
+      int8_t oldLdrPin = ldrPin;
+      JsonObject top = root[FPSTR(_name)];
+      bool configComplete = !top.isNull();
+      configComplete &= getJsonValue(top["Enabled"], ldrEnabled);
+      configComplete &= getJsonValue(top["LDR Pin"], ldrPin);
+      configComplete &= getJsonValue(top["Threshold Minutes"], ldrThresholdMinutes);
+      configComplete &= getJsonValue(top["Threshold"], ldrThreshold);
+      configComplete &= getJsonValue(top["On Preset"], ldrOnPreset);
+      configComplete &= getJsonValue(top["Off Preset"], ldrOffPreset);
+
+      if (initDone && (ldrPin != oldLdrPin)) {
+         // pin changed - un-register previous pin, register new pin
+        if (oldLdrPin >= 0) pinManager.deallocatePin(oldLdrPin, PinOwner::UM_LDR_DUSK_DAWN);
+        setup();             // setup new pin
+      }
+      return configComplete;
+  }
+
+  void addToJsonInfo(JsonObject& root) {
+      // If "u" object does not exist yet we need to create it
+      JsonObject user = root["u"];
+      if (user.isNull()) user = root.createNestedObject("u");
+
+      JsonArray LDR_Enabled = user.createNestedArray("LDR dusk/dawn enabled");
+      LDR_Enabled.add(ldrEnabled);
+      if (!ldrEnabled) return; // do not add more if usermod is disabled
+
+      JsonArray LDR_Reading = user.createNestedArray("LDR reading");
+      LDR_Reading.add(ldrReading);
+
+      JsonArray LDR_State = user.createNestedArray("LDR turned LEDs on");
+      LDR_State.add(bool(ldrLEDState));
+
+      // Optional debug information:
+      //JsonArray LDR_On_Count = user.createNestedArray("LDR on count");
+      //LDR_On_Count.add(ldrOnCount);
+
+      //JsonArray LDR_Off_Count = user.createNestedArray("LDR off count");
+      //LDR_Off_Count.add(ldrOffCount);
+
+      //bool pinValid = ((ldrPin >= 0) && (digitalPinToAnalogChannel(ldrPin) >= 0));
+      //if (pinManager.getPinOwner(ldrPin) != PinOwner::UM_LDR_DUSK_DAWN) pinValid = false;
+      //JsonArray LDR_valid = user.createNestedArray(F("LDR pin"));
+      //LDR_valid.add(ldrPin);
+      //LDR_valid.add(pinValid ? F(" OK"): F(" invalid"));
+  }
+
+  uint16_t getId() {
+    return USERMOD_ID_LDR_DUSK_DAWN;
+  }
+};
+
+const char LDR_Dusk_Dawn_v2::_name[]    PROGMEM = "LDR_Dusk_Dawn_v2";

usermods/MAX17048_v2/readme.md

@@ -0,0 +1,64 @@
+# Adafruit MAX17048 Usermod (LiPo & LiIon Battery Monitor & Fuel Gauge)
+This usermod reads information from an Adafruit MAX17048  and outputs the following:
+- Battery Voltage
+- Battery Level Percentage
+
+
+## Dependencies
+Libraries:
+- `Adafruit_BusIO@~1.14.5` (by [adafruit](https://github.com/adafruit/Adafruit_BusIO))
+- `Adafruit_MAX1704X@~1.0.2` (by [adafruit](https://github.com/adafruit/Adafruit_MAX1704X))
+
+These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+Data is published over MQTT - make sure you've enabled the MQTT sync interface.
+
+## Compilation
+
+To enable, compile with `USERMOD_MAX17048` define in the build_flags (e.g. in `platformio.ini` or `platformio_override.ini`) such as in the example below:
+```ini
+[env:usermod_max17048_d1_mini]
+extends = env:d1_mini
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_MAX17048
+lib_deps = 
+  ${esp8266.lib_deps}
+  https://github.com/adafruit/Adafruit_BusIO @ 1.14.5
+  https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2
+```
+
+### Configuration Options
+The following settings can be set at compile-time but are configurable on the usermod menu (except First Monitor time):
+- USERMOD_MAX17048_MIN_MONITOR_INTERVAL (the min number of milliseconds between checks, defaults to 10,000 ms)
+- USERMOD_MAX17048_MAX_MONITOR_INTERVAL (the max number of milliseconds between checks, defaults to 10,000 ms)
+- USERMOD_MAX17048_FIRST_MONITOR_AT
+
+
+Additionally, the Usermod Menu allows you to:
+- Enable or Disable the usermod
+- Enable or Disable Home Assistant Discovery (turn on/off to sent MQTT Discovery entries for Home Assistant)
+- Configure SCL/SDA GPIO Pins
+
+## API
+The following method is available to interact with the usermod from other code modules:
+- `getBatteryVoltageV` read the last battery voltage (in Volt) obtained from the sensor
+- `getBatteryPercent` reads the last battery percentage obtained from the sensor
+
+## MQTT
+MQTT topics are as follows (`<deviceTopic>` is set in MQTT section of Sync Setup menu):
+Measurement type | MQTT topic
+--- | ---
+Battery Voltage | `<deviceTopic>/batteryVoltage`
+Battery Percent | `<deviceTopic>/batteryPercent`
+
+## Authors
+Carlos Cruz [@ccruz09](https://github.com/ccruz09)
+
+
+## Revision History
+Jan 2024
+- Added Home Assistant Discovery
+- Implemented PinManager to register pins
+- Added API call for other modules to read battery voltage and percentage
+- Added info-screen outputs
+- Updated `readme.md`

usermods/MAX17048_v2/usermod_max17048.h

@@ -0,0 +1,281 @@
+// force the compiler to show a warning to confirm that this file is included
+#warning **** Included USERMOD_MAX17048 V2.0 ****
+
+#pragma once
+
+#include "wled.h"
+#include "Adafruit_MAX1704X.h"
+
+
+// the max interval to check battery level, 10 seconds
+#ifndef USERMOD_MAX17048_MAX_MONITOR_INTERVAL
+#define USERMOD_MAX17048_MAX_MONITOR_INTERVAL 10000
+#endif
+
+// the min  interval to check battery level, 500 ms
+#ifndef USERMOD_MAX17048_MIN_MONITOR_INTERVAL
+#define USERMOD_MAX17048_MIN_MONITOR_INTERVAL 500
+#endif
+
+// how many seconds after boot to perform the first check, 10 seconds
+#ifndef USERMOD_MAX17048_FIRST_MONITOR_AT
+#define USERMOD_MAX17048_FIRST_MONITOR_AT 10000
+#endif
+
+/* 
+ * Usermod to display Battery Life using Adafruit's MAX17048 LiPoly/ LiIon Fuel Gauge and Battery Monitor.
+ */
+class  Usermod_MAX17048 : public Usermod {
+
+  private:
+
+    bool enabled = true;
+
+    unsigned long maxReadingInterval = USERMOD_MAX17048_MAX_MONITOR_INTERVAL;
+    unsigned long minReadingInterval = USERMOD_MAX17048_MIN_MONITOR_INTERVAL;
+    unsigned long lastCheck = UINT32_MAX - (USERMOD_MAX17048_MAX_MONITOR_INTERVAL - USERMOD_MAX17048_FIRST_MONITOR_AT);
+    unsigned long lastSend = UINT32_MAX - (USERMOD_MAX17048_MAX_MONITOR_INTERVAL - USERMOD_MAX17048_FIRST_MONITOR_AT);
+
+
+    uint8_t  VoltageDecimals = 3;  // Number of decimal places in published voltage values
+    uint8_t  PercentDecimals = 1;    // Number of decimal places in published percent values
+
+    // string that are used multiple time (this will save some flash memory)
+    static const char _name[];
+    static const char _enabled[];
+    static const char _maxReadInterval[];
+    static const char _minReadInterval[];
+    static const char _HomeAssistantDiscovery[];
+
+    bool monitorFound = false;
+    bool firstReadComplete = false;
+    bool initDone = false;
+
+    Adafruit_MAX17048 maxLipo;
+    float lastBattVoltage = -10;
+    float lastBattPercent = -1;
+
+    // MQTT and Home Assistant Variables
+    bool HomeAssistantDiscovery = false;    // Publish Home Assistant Device Information
+    bool mqttInitialized = false; 
+
+    void _mqttInitialize()
+    {
+        char mqttBatteryVoltageTopic[128];
+        char mqttBatteryPercentTopic[128];
+
+        snprintf_P(mqttBatteryVoltageTopic, 127, PSTR("%s/batteryVoltage"), mqttDeviceTopic);
+        snprintf_P(mqttBatteryPercentTopic, 127, PSTR("%s/batteryPercent"), mqttDeviceTopic);
+
+        if (HomeAssistantDiscovery) {
+        _createMqttSensor(F("BatteryVoltage"), mqttBatteryVoltageTopic, "voltage", F("V"));
+        _createMqttSensor(F("BatteryPercent"), mqttBatteryPercentTopic, "battery", F("%"));
+        }
+    }
+
+    void _createMqttSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+    {
+        String t = String(F("homeassistant/sensor/")) + mqttClientID + F("/") + name + F("/config");
+
+        StaticJsonDocument<600> doc;
+
+        doc[F("name")] = String(serverDescription) + " " + name;
+        doc[F("state_topic")] = topic;
+        doc[F("unique_id")] = String(mqttClientID) + name;
+        if (unitOfMeasurement != "")
+        doc[F("unit_of_measurement")] = unitOfMeasurement;
+        if (deviceClass != "")
+        doc[F("device_class")] = deviceClass;
+        doc[F("expire_after")] = 1800;
+
+        JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
+        device[F("name")] = serverDescription;
+        device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+        device[F("manufacturer")] = F("WLED");
+        device[F("model")] = F("FOSS");
+        device[F("sw_version")] = versionString;
+
+        String temp;
+        serializeJson(doc, temp);
+        DEBUG_PRINTLN(t);
+        DEBUG_PRINTLN(temp);
+
+        mqtt->publish(t.c_str(), 0, true, temp.c_str());
+    }
+
+    void publishMqtt(const char *topic, const char* state) {
+    #ifndef WLED_DISABLE_MQTT
+      //Check if MQTT Connected, otherwise it will crash the 8266
+      if (WLED_MQTT_CONNECTED){
+        char subuf[128];
+        snprintf_P(subuf, 127, PSTR("%s/%s"), mqttDeviceTopic, topic);
+        mqtt->publish(subuf, 0, false, state);
+      }
+    #endif
+    }
+
+  public:
+
+    inline void enable(bool enable) { enabled = enable; }
+
+    inline bool isEnabled() { return enabled; }
+
+    void setup() {
+      // do your set-up here
+      if (i2c_scl<0 || i2c_sda<0) { enabled = false; return; }
+      monitorFound = maxLipo.begin();
+      initDone = true;
+    }
+
+    void loop() {
+      // if usermod is disabled or called during strip updating just exit
+      // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
+      if (!enabled || strip.isUpdating()) return;
+
+        unsigned long now = millis();
+
+        if (now - lastCheck < minReadingInterval) { return; }
+
+        bool shouldUpdate = now - lastSend > maxReadingInterval;
+
+        float battVoltage = maxLipo.cellVoltage();
+        float battPercent = maxLipo.cellPercent();
+        lastCheck = millis();
+        firstReadComplete = true;
+
+        if (shouldUpdate)
+        {
+          lastBattVoltage = roundf(battVoltage * powf(10, VoltageDecimals)) / powf(10, VoltageDecimals);
+          lastBattPercent = roundf(battPercent * powf(10, PercentDecimals)) / powf(10, PercentDecimals);
+          lastSend = millis();
+
+          publishMqtt("batteryVoltage", String(lastBattVoltage, VoltageDecimals).c_str());
+          publishMqtt("batteryPercent", String(lastBattPercent, PercentDecimals).c_str());
+          DEBUG_PRINTLN(F("Battery Voltage: ") + String(lastBattVoltage, VoltageDecimals) + F("V"));
+          DEBUG_PRINTLN(F("Battery Percent: ") + String(lastBattPercent, PercentDecimals) + F("%"));
+        }
+    }
+
+    void onMqttConnect(bool sessionPresent)
+    {
+        if (WLED_MQTT_CONNECTED && !mqttInitialized)
+        {
+            _mqttInitialize();
+            mqttInitialized = true;
+        }
+    }
+
+    inline float getBatteryVoltageV() {
+        return (float) lastBattVoltage;
+    }
+
+    inline float getBatteryPercent() {
+        return (float) lastBattPercent;
+    }
+
+    void addToJsonInfo(JsonObject& root)
+    {
+      // if "u" object does not exist yet wee need to create it
+      JsonObject user = root["u"];
+      if (user.isNull()) user = root.createNestedObject("u");
+
+
+      JsonArray battery_json = user.createNestedArray(F("Battery Monitor"));
+      if (!enabled) {
+        battery_json.add(F("Disabled"));
+      }
+      else if(!monitorFound) {
+        battery_json.add(F("MAX17048 Not Found"));
+      }        
+      else if (!firstReadComplete) {
+        // if we haven't read the sensor yet, let the user know
+        // that we are still waiting for the first measurement
+        battery_json.add((USERMOD_MAX17048_FIRST_MONITOR_AT - millis()) / 1000);
+        battery_json.add(F(" sec until read"));
+      } else {
+        battery_json.add(F("Enabled"));
+        JsonArray voltage_json = user.createNestedArray(F("Battery Voltage"));
+        voltage_json.add(lastBattVoltage);
+        voltage_json.add(F("V"));
+        JsonArray percent_json = user.createNestedArray(F("Battery Percent"));
+        percent_json.add(lastBattPercent);
+        percent_json.add(F("%"));
+      }
+    }
+
+    void addToJsonState(JsonObject& root)
+    {
+        JsonObject usermod = root[FPSTR(_name)];
+        if (usermod.isNull())
+        {
+        usermod = root.createNestedObject(FPSTR(_name));
+        }
+        usermod[FPSTR(_enabled)] = enabled;
+    }
+
+    void readFromJsonState(JsonObject& root)
+    {
+        JsonObject usermod = root[FPSTR(_name)];
+        if (!usermod.isNull())
+        {
+            if (usermod[FPSTR(_enabled)].is<bool>())
+            {
+                enabled = usermod[FPSTR(_enabled)].as<bool>();
+            }
+        }
+    }
+
+    void addToConfig(JsonObject& root)
+    {
+      JsonObject top = root.createNestedObject(FPSTR(_name));
+      top[FPSTR(_enabled)] = enabled;
+      top[FPSTR(_maxReadInterval)] = maxReadingInterval;
+      top[FPSTR(_minReadInterval)] = minReadingInterval;
+      top[FPSTR(_HomeAssistantDiscovery)] = HomeAssistantDiscovery;
+      DEBUG_PRINT(F(_name));
+      DEBUG_PRINTLN(F(" config saved."));
+    }
+
+    bool readFromConfig(JsonObject& root)
+    {
+      JsonObject top = root[FPSTR(_name)];
+
+      if (top.isNull()) {
+        DEBUG_PRINT(F(_name));
+        DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
+        return false;
+      }
+
+      bool configComplete = !top.isNull();
+
+      configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled);
+      configComplete &= getJsonValue(top[FPSTR(_maxReadInterval)], maxReadingInterval, USERMOD_MAX17048_MAX_MONITOR_INTERVAL);
+      configComplete &= getJsonValue(top[FPSTR(_minReadInterval)], minReadingInterval, USERMOD_MAX17048_MIN_MONITOR_INTERVAL);
+      configComplete &= getJsonValue(top[FPSTR(_HomeAssistantDiscovery)], HomeAssistantDiscovery, false);
+
+      DEBUG_PRINT(FPSTR(_name));
+      if (!initDone) {
+        // first run: reading from cfg.json
+        DEBUG_PRINTLN(F(" config loaded."));
+      } else {
+        DEBUG_PRINTLN(F(" config (re)loaded."));
+        // changing parameters from settings page
+      }
+
+      return configComplete;
+    }
+
+    uint16_t getId()
+    {
+      return USERMOD_ID_MAX17048;
+    }
+
+};
+
+
+// add more strings here to reduce flash memory usage
+const char Usermod_MAX17048::_name[]    PROGMEM = "Adafruit MAX17048 Battery Monitor";
+const char Usermod_MAX17048::_enabled[] PROGMEM = "enabled";
+const char Usermod_MAX17048::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
+const char Usermod_MAX17048::_minReadInterval[] PROGMEM = "min-read-interval-ms";
+const char Usermod_MAX17048::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscovery";

usermods/PIR_sensor_switch/readme.md

@@ -23,7 +23,7 @@ You can also use usermod's off timer instead of sensor's. In such case rotate th
 
 ## Usermod installation
 
-**NOTE:** Usermod has been included in master branch of WLED so it can be compiled in directly just by defining `-D USERMOD_PIRSWITCH` and optionaly `-D PIR_SENSOR_PIN=16` to override default pin. You can also change the default off time by adding `-D PIR_SENSOR_OFF_SEC=30`.
+**NOTE:** Usermod has been included in master branch of WLED so it can be compiled in directly just by defining `-D USERMOD_PIRSWITCH` and optionally `-D PIR_SENSOR_PIN=16` to override default pin. You can also change the default off time by adding `-D PIR_SENSOR_OFF_SEC=30`.
 
 ## API to enable/disable the PIR sensor from outside. For example from another usermod:
 
@@ -31,7 +31,7 @@ To query or change the PIR sensor state the methods `bool PIRsensorEnabled()` an
 
 When the PIR sensor state changes an MQTT message is broadcasted with topic `wled/deviceMAC/motion` and message `on` or `off`.
 Usermod can also be configured to send just the MQTT message but not change WLED state using settings page as well as responding to motion only at night
-(assuming NTP and lattitude/longitude are set to determine sunrise/sunset times).
+(assuming NTP and latitude/longitude are set to determine sunrise/sunset times).
 
 ### There are two options to get access to the usermod instance:
 
@@ -75,6 +75,9 @@ Usermod can be configured via the Usermods settings page.
 * `mqtt-only` - send only MQTT messages, do not interact with WLED
 * `off-only` - only trigger presets or turn WLED on/off if WLED is not already on (displaying effect)
 * `notifications` - enable or disable sending notifications to other WLED instances using Sync button
+* `HA-discovery` - enable automatic discovery in Home Assistant
+* `override` - override PIR input when WLED state is changed using UI
+* `domoticz-idx` - Domoticz virtual switch ID (used with MQTT `domoticz/in`)
 
 
 Have fun - @gegu & @blazoncek
@@ -85,9 +88,16 @@ Have fun - @gegu & @blazoncek
 
 2021-11
 * Added information about dynamic configuration options
-* Added option to temporary enable/disble usermod from WLED UI (Info dialog)
+* Added option to temporary enable/disable usermod from WLED UI (Info dialog)
 
 2022-11
 * Added compile time option for off timer.
 * Added Home Assistant autodiscovery MQTT broadcast.
 * Updated info on compiling.
+
+2023-??
+* Override option
+* Domoticz virtual switch ID (used with MQTT `domoticz/in`)
+
+2024-02
+* Added compile time option to expand number of PIR sensors (they are logically ORed) `-D PIR_SENSOR_MAX_SENSORS=3`

usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h

@@ -15,6 +15,9 @@
   #define PIR_SENSOR_OFF_SEC 600
 #endif
 
+#ifndef PIR_SENSOR_MAX_SENSORS
+  #define PIR_SENSOR_MAX_SENSORS 1
+#endif
 
 /*
  * This usermod handles PIR sensor states.
@@ -50,14 +53,17 @@ private:
 
   volatile unsigned long offTimerStart = 0;     // off timer start time
   volatile bool PIRtriggered           = false; // did PIR trigger?
-  byte NotifyUpdateMode  = CALL_MODE_NO_NOTIFY; // notification mode for stateUpdated(): CALL_MODE_NO_NOTIFY or CALL_MODE_DIRECT_CHANGE
-  byte sensorPinState    = LOW;                 // current PIR sensor pin state
-  bool initDone          = false;               // status of initialization
-  unsigned long lastLoop = 0;
+  bool          initDone               = false; // status of initialization
+  unsigned long lastLoop               = 0;
+  bool sensorPinState[PIR_SENSOR_MAX_SENSORS] = {LOW}; // current PIR sensor pin state
 
   // configurable parameters
+#if PIR_SENSOR_PIN < 0
+  bool enabled              = false;          // PIR sensor disabled
+#else
   bool enabled              = true;           // PIR sensor enabled
-  int8_t PIRsensorPin       = PIR_SENSOR_PIN; // PIR sensor pin
+#endif
+  int8_t PIRsensorPin[PIR_SENSOR_MAX_SENSORS] = {PIR_SENSOR_PIN}; // PIR sensor pin
   uint32_t m_switchOffDelay = PIR_SENSOR_OFF_SEC*1000;  // delay before switch off after the sensor state goes LOW (10min)
   uint8_t m_onPreset        = 0;              // on preset
   uint8_t m_offPreset       = 0;              // off preset
@@ -70,6 +76,7 @@ private:
 
   // Home Assistant
   bool HomeAssistantDiscovery = false;        // is HA discovery turned on
+  int16_t idx = -1; // Domoticz virtual switch idx
 
   // strings to reduce flash memory usage (used more than twice)
   static const char _name[];
@@ -81,8 +88,8 @@ private:
   static const char _mqttOnly[];
   static const char _offOnly[];
   static const char _haDiscovery[];
-  static const char _notify[];
   static const char _override[];
+  static const char _domoticzIDX[];
 
   /**
    * check if it is daytime
@@ -94,14 +101,14 @@ private:
    * switch strip on/off
    */
   void switchStrip(bool switchOn);
-  void publishMqtt(const char* state);
+  void publishMqtt(bool switchOn);
 
   // Create an MQTT Binary Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
   void publishHomeAssistantAutodiscovery();
 
   /**
    * Read and update PIR sensor state.
-   * Initilize/reset switch off timer
+   * Initialize/reset switch off timer
    */
   bool updatePIRsensorState();
 
@@ -117,7 +124,7 @@ public:
    * setup() is called once at boot. WiFi is not yet connected at this point.
    * You can use it to initialize variables, sensors or similar.
    */
-  void setup();
+  void setup() override;
 
   /**
    * connected() is called every time the WiFi is (re)connected
@@ -128,24 +135,24 @@ public:
   /**
    * onMqttConnect() is called when MQTT connection is established
    */
-  void onMqttConnect(bool sessionPresent);
+  void onMqttConnect(bool sessionPresent) override;
 
   /**
    * loop() is called continuously. Here you can check for events, read sensors, etc.
    */
-  void loop();
+  void loop() override;
 
   /**
    * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
    * 
    * Add PIR sensor state and switch off timer duration to jsoninfo
    */
-  void addToJsonInfo(JsonObject &root);
+  void addToJsonInfo(JsonObject &root) override;
 
   /**
    * onStateChanged() is used to detect WLED state change
    */
-  void onStateChange(uint8_t mode);
+  void onStateChange(uint8_t mode) override;
 
   /**
    * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
@@ -157,17 +164,17 @@ public:
    * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
    * Values in the state object may be modified by connected clients
    */
-  void readFromJsonState(JsonObject &root);
+  void readFromJsonState(JsonObject &root) override;
 
   /**
    * provide the changeable values
    */
-  void addToConfig(JsonObject &root);
+  void addToConfig(JsonObject &root) override;
 
   /**
    * provide UI information and allow extending UI options
    */
-  void appendConfigData();
+  void appendConfigData() override;
 
   /**
    * restore the changeable values
@@ -175,13 +182,13 @@ public:
    *
    * The function should return true if configuration was successfully loaded or false if there was no configuration.
    */
-  bool readFromConfig(JsonObject &root);
+  bool readFromConfig(JsonObject &root) override;
 
   /**
    * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
    * This could be used in the future for the system to determine whether your usermod is installed.
    */
-  uint16_t getId() { return USERMOD_ID_PIRSWITCH; }
+  uint16_t getId() override { return USERMOD_ID_PIRSWITCH; }
 };
 
 // strings to reduce flash memory usage (used more than twice)
@@ -194,8 +201,8 @@ const char PIRsensorSwitch::_nightTime[]      PROGMEM = "nighttime-only";
 const char PIRsensorSwitch::_mqttOnly[]       PROGMEM = "mqtt-only";
 const char PIRsensorSwitch::_offOnly[]        PROGMEM = "off-only";
 const char PIRsensorSwitch::_haDiscovery[]    PROGMEM = "HA-discovery";
-const char PIRsensorSwitch::_notify[]         PROGMEM = "notifications";
 const char PIRsensorSwitch::_override[]       PROGMEM = "override";
+const char PIRsensorSwitch::_domoticzIDX[]    PROGMEM = "domoticz-idx";
 
 bool PIRsensorSwitch::isDayTime() {
   updateLocalTime();
@@ -235,24 +242,24 @@ void PIRsensorSwitch::switchStrip(bool switchOn)
         prevPlaylist = 0;
         prevPreset   = 255;
       }
-      applyPreset(m_onPreset, NotifyUpdateMode);
+      applyPreset(m_onPreset, CALL_MODE_BUTTON_PRESET);
       return;
     }
     // preset not assigned
     if (bri == 0) {
       bri = briLast;
-      stateUpdated(NotifyUpdateMode);
+      stateUpdated(CALL_MODE_BUTTON);
     }
   } else {
     if (m_offPreset) {
-      applyPreset(m_offPreset, NotifyUpdateMode);
+      applyPreset(m_offPreset, CALL_MODE_BUTTON_PRESET);
       return;
     } else if (prevPlaylist) {
-      if (currentPreset==m_onPreset || currentPlaylist==m_onPreset) applyPreset(prevPlaylist, NotifyUpdateMode);
+      if (currentPreset==m_onPreset || currentPlaylist==m_onPreset) applyPreset(prevPlaylist, CALL_MODE_BUTTON_PRESET);
       prevPlaylist = 0;
       return;
     } else if (prevPreset) {
-      if (prevPreset<255) { if (currentPreset==m_onPreset || currentPlaylist==m_onPreset) applyPreset(prevPreset, NotifyUpdateMode); }
+      if (prevPreset<255) { if (currentPreset==m_onPreset || currentPlaylist==m_onPreset) applyPreset(prevPreset, CALL_MODE_BUTTON_PRESET); }
       else                { if (currentPreset==m_onPreset || currentPlaylist==m_onPreset) applyTemporaryPreset(); }
       prevPreset = 0;
       return;
@@ -261,19 +268,29 @@ void PIRsensorSwitch::switchStrip(bool switchOn)
     if (bri != 0) {
       briLast = bri;
       bri = 0;
-      stateUpdated(NotifyUpdateMode);
+      stateUpdated(CALL_MODE_BUTTON);
     }
   }
 }
 
-void PIRsensorSwitch::publishMqtt(const char* state)
+void PIRsensorSwitch::publishMqtt(bool switchOn)
 {
 #ifndef WLED_DISABLE_MQTT
   //Check if MQTT Connected, otherwise it will crash the 8266
   if (WLED_MQTT_CONNECTED) {
-    char buf[64];
+    char buf[128];
     sprintf_P(buf, PSTR("%s/motion"), mqttDeviceTopic);   //max length: 33 + 7 = 40
-    mqtt->publish(buf, 0, false, state);
+    mqtt->publish(buf, 0, false, switchOn?"on":"off");
+    // Domoticz formatted message
+    if (idx > 0) {
+      StaticJsonDocument <128> msg;
+      msg[F("idx")]       = idx;
+      msg[F("RSSI")]      = WiFi.RSSI();
+      msg[F("command")]   = F("switchlight");
+      msg[F("switchcmd")] = switchOn ? F("On") : F("Off");
+      serializeJson(msg, buf, 128);
+      mqtt->publish("domoticz/in", 0, false, buf);
+    }
   }
 #endif
 }
@@ -299,8 +316,8 @@ void PIRsensorSwitch::publishHomeAssistantAutodiscovery()
     JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
     device[F("name")] = serverDescription;
     device[F("ids")]  = String(F("wled-sensor-")) + mqttClientID;
-    device[F("mf")]   = "WLED";
-    device[F("mdl")]  = F("FOSS");
+    device[F("mf")]   = F(WLED_BRAND);
+    device[F("mdl")]  = F(WLED_PRODUCT_NAME);
     device[F("sw")]   = versionString;
     
     sprintf_P(buf, PSTR("homeassistant/binary_sensor/%s/config"), uid);
@@ -315,34 +332,36 @@ void PIRsensorSwitch::publishHomeAssistantAutodiscovery()
 
 bool PIRsensorSwitch::updatePIRsensorState()
 {
-  bool pinState = digitalRead(PIRsensorPin);
-  if (pinState != sensorPinState) {
-    sensorPinState = pinState; // change previous state
+  bool stateChanged = false;
+  bool allOff = true;
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++) {
+    if (PIRsensorPin[i] < 0) continue;
 
-    if (sensorPinState == HIGH) {
-      offTimerStart = 0;
-      if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(true);
-      else if (NotifyUpdateMode != CALL_MODE_NO_NOTIFY) updateInterfaces(CALL_MODE_WS_SEND);
-      publishMqtt("on");
-    } else {
-      // start switch off timer
-      offTimerStart = millis();
-      if (NotifyUpdateMode != CALL_MODE_NO_NOTIFY) updateInterfaces(CALL_MODE_WS_SEND);
+    bool pinState = digitalRead(PIRsensorPin[i]);
+    if (pinState != sensorPinState[i]) {
+      sensorPinState[i] = pinState; // change previous state
+      stateChanged = true;
+
+      if (sensorPinState[i] == HIGH) {
+        offTimerStart = 0;
+        allOff = false;
+        if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(true);
+      }
     }
-    return true;
   }
-  return false;
+  if (stateChanged) {
+    publishMqtt(!allOff);
+    // start switch off timer
+    if (allOff) offTimerStart = millis();
+  }
+  return stateChanged;
 }
 
 bool PIRsensorSwitch::handleOffTimer()
 {
   if (offTimerStart > 0 && millis() - offTimerStart > m_switchOffDelay) {
     offTimerStart = 0;
-    if (enabled == true) {
-      if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()) || PIRtriggered)) switchStrip(false);
-      else if (NotifyUpdateMode != CALL_MODE_NO_NOTIFY) updateInterfaces(CALL_MODE_WS_SEND);
-      publishMqtt("off");
-    }
+    if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()) || PIRtriggered)) switchStrip(false);
     return true;
   }
   return false;
@@ -352,18 +371,21 @@ bool PIRsensorSwitch::handleOffTimer()
 
 void PIRsensorSwitch::setup()
 {
-  if (enabled) {
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++) {
+    sensorPinState[i] = LOW;
+    if (PIRsensorPin[i] < 0) continue;
     // pin retrieved from cfg.json (readFromConfig()) prior to running setup()
-    if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin, false, PinOwner::UM_PIR)) {
-      // PIR Sensor mode INPUT_PULLUP
-      pinMode(PIRsensorPin, INPUT_PULLUP);
-      sensorPinState = digitalRead(PIRsensorPin);
+    if (pinManager.allocatePin(PIRsensorPin[i], false, PinOwner::UM_PIR)) {
+      // PIR Sensor mode INPUT_PULLDOWN
+      #ifdef ESP8266
+      pinMode(PIRsensorPin[i], PIRsensorPin[i]==16 ? INPUT_PULLDOWN_16 : INPUT_PULLUP); // ESP8266 has INPUT_PULLDOWN on GPIO16 only
+      #else
+      pinMode(PIRsensorPin[i], INPUT_PULLDOWN);
+      #endif
+      sensorPinState[i] = digitalRead(PIRsensorPin[i]);
     } else {
-      if (PIRsensorPin >= 0) {
-        DEBUG_PRINTLN(F("PIRSensorSwitch pin allocation failed."));
-      }
-      PIRsensorPin = -1;  // allocation failed
-      enabled = false;
+      DEBUG_PRINT(F("PIRSensorSwitch pin ")); DEBUG_PRINTLN(i); DEBUG_PRINTLN(F(" allocation failed."));
+      PIRsensorPin[i] = -1;  // allocation failed
     }
   }
   initDone = true;
@@ -378,8 +400,8 @@ void PIRsensorSwitch::onMqttConnect(bool sessionPresent)
 
 void PIRsensorSwitch::loop()
 {
-  // only check sensors 4x/s
-  if (!enabled || millis() - lastLoop < 250 || strip.isUpdating()) return;
+  // only check sensors 5x/s
+  if (!enabled || millis() - lastLoop < 200) return;
   lastLoop = millis();
 
   if (!updatePIRsensorState()) {
@@ -392,37 +414,35 @@ void PIRsensorSwitch::addToJsonInfo(JsonObject &root)
   JsonObject user = root["u"];
   if (user.isNull()) user = root.createNestedObject("u");
 
+  bool state = LOW;
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++)
+    if (PIRsensorPin[i] >= 0) state |= sensorPinState[i];
+
   JsonArray infoArr = user.createNestedArray(FPSTR(_name));
 
   String uiDomString;
   if (enabled) {
-    if (offTimerStart > 0)
-    {
+    if (offTimerStart > 0) {
       uiDomString = "";
       unsigned int offSeconds = (m_switchOffDelay - (millis() - offTimerStart)) / 1000;
-      if (offSeconds >= 3600)
-      {
+      if (offSeconds >= 3600) {
         uiDomString += (offSeconds / 3600);
         uiDomString += F("h ");
         offSeconds %= 3600;
       }
-      if (offSeconds >= 60)
-      {
+      if (offSeconds >= 60) {
         uiDomString += (offSeconds / 60);
         offSeconds %= 60;
-      }
-      else if (uiDomString.length() > 0)
-      {
+      } else if (uiDomString.length() > 0) {
         uiDomString += 0;
       }
-      if (uiDomString.length() > 0)
-      {
+      if (uiDomString.length() > 0) {
         uiDomString += F("min ");
       }
       uiDomString += (offSeconds);
       infoArr.add(uiDomString + F("s"));
     } else {
-      infoArr.add(sensorPinState ? F("sensor on") : F("inactive"));
+      infoArr.add(state ? F("sensor on") : F("inactive"));
     }
   } else {
     infoArr.add(F("disabled"));
@@ -442,9 +462,11 @@ void PIRsensorSwitch::addToJsonInfo(JsonObject &root)
   uiDomString += F("</button>");
   infoArr.add(uiDomString);
 
-  JsonObject sensor = root[F("sensor")];
-  if (sensor.isNull()) sensor = root.createNestedObject(F("sensor"));
-  sensor[F("motion")] = sensorPinState || offTimerStart>0 ? true : false;
+  if (enabled) {
+    JsonObject sensor = root[F("sensor")];
+    if (sensor.isNull()) sensor = root.createNestedObject(F("sensor"));
+    sensor[F("motion")] = state || offTimerStart>0 ? true : false;
+  }
 }
 
 void PIRsensorSwitch::onStateChange(uint8_t mode) {
@@ -474,7 +496,8 @@ void PIRsensorSwitch::addToConfig(JsonObject &root)
   JsonObject top = root.createNestedObject(FPSTR(_name));
   top[FPSTR(_enabled)]        = enabled;
   top[FPSTR(_switchOffDelay)] = m_switchOffDelay / 1000;
-  top["pin"]                  = PIRsensorPin;
+  JsonArray pinArray          = top.createNestedArray("pin");
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++) pinArray.add(PIRsensorPin[i]);
   top[FPSTR(_onPreset)]       = m_onPreset;
   top[FPSTR(_offPreset)]      = m_offPreset;
   top[FPSTR(_nightTime)]      = m_nightTimeOnly;
@@ -482,21 +505,28 @@ void PIRsensorSwitch::addToConfig(JsonObject &root)
   top[FPSTR(_offOnly)]        = m_offOnly;
   top[FPSTR(_override)]       = m_override;
   top[FPSTR(_haDiscovery)]    = HomeAssistantDiscovery;
-  top[FPSTR(_notify)]         = (NotifyUpdateMode != CALL_MODE_NO_NOTIFY);
+  top[FPSTR(_domoticzIDX)]    = idx;
   DEBUG_PRINTLN(F("PIR config saved."));
 }
 
 void PIRsensorSwitch::appendConfigData()
 {
   oappend(SET_F("addInfo('PIRsensorSwitch:HA-discovery',1,'HA=Home Assistant');"));     // 0 is field type, 1 is actual field
-  oappend(SET_F("addInfo('PIRsensorSwitch:notifications',1,'Periodic WS updates');"));  // 0 is field type, 1 is actual field
   oappend(SET_F("addInfo('PIRsensorSwitch:override',1,'Cancel timer on change');"));    // 0 is field type, 1 is actual field
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++) {
+    char str[128];
+    sprintf_P(str, PSTR("addInfo('PIRsensorSwitch:pin[]',%d,'','#%d');"), i, i);
+    oappend(str);
+  }
 }
 
 bool PIRsensorSwitch::readFromConfig(JsonObject &root)
 {
-  bool oldEnabled = enabled;
-  int8_t oldPin = PIRsensorPin;
+  int8_t oldPin[PIR_SENSOR_MAX_SENSORS];
+  for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++) {
+    oldPin[i] = PIRsensorPin[i];
+    PIRsensorPin[i] = -1;
+  }
 
   DEBUG_PRINT(FPSTR(_name));
   JsonObject top = root[FPSTR(_name)];
@@ -505,7 +535,13 @@ bool PIRsensorSwitch::readFromConfig(JsonObject &root)
     return false;
   }
 
-  PIRsensorPin = top["pin"] | PIRsensorPin;
+  JsonArray pins = top["pin"];
+  if (!pins.isNull()) {
+    for (size_t i = 0; i < PIR_SENSOR_MAX_SENSORS; i++)
+      if (i < pins.size()) PIRsensorPin[i] = pins[i] | PIRsensorPin[i];
+  } else {
+    PIRsensorPin[0] = top["pin"] | oldPin[0];
+  }
 
   enabled = top[FPSTR(_enabled)] | enabled;
 
@@ -521,33 +557,17 @@ bool PIRsensorSwitch::readFromConfig(JsonObject &root)
   m_offOnly       = top[FPSTR(_offOnly)] | m_offOnly;
   m_override      = top[FPSTR(_override)] | m_override;
   HomeAssistantDiscovery = top[FPSTR(_haDiscovery)] | HomeAssistantDiscovery;
-
-  NotifyUpdateMode = top[FPSTR(_notify)] ? CALL_MODE_DIRECT_CHANGE : CALL_MODE_NO_NOTIFY;
+  idx             = top[FPSTR(_domoticzIDX)] | idx;
 
   if (!initDone) {
     // reading config prior to setup()
     DEBUG_PRINTLN(F(" config loaded."));
   } else {
-    if (oldPin != PIRsensorPin || oldEnabled != enabled) {
-      // check if pin is OK
-      if (oldPin != PIRsensorPin && oldPin >= 0) {
-        // if we are changing pin in settings page
-        // deallocate old pin
-        pinManager.deallocatePin(oldPin, PinOwner::UM_PIR);
-        if (pinManager.allocatePin(PIRsensorPin, false, PinOwner::UM_PIR)) {
-          pinMode(PIRsensorPin, INPUT_PULLUP);
-        } else {
-          // allocation failed
-          PIRsensorPin = -1;
-          enabled = false;
-        }
-      }
-      if (enabled) {
-        sensorPinState = digitalRead(PIRsensorPin);
-      }
-    }
+    for (int i = 0; i < PIR_SENSOR_MAX_SENSORS; i++)
+      if (oldPin[i] >= 0) pinManager.deallocatePin(oldPin[i], PinOwner::UM_PIR);
+    setup();
     DEBUG_PRINTLN(F(" config (re)loaded."));
   }
   // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
-  return !top[FPSTR(_override)].isNull();
+  return !(pins.isNull() || pins.size() != PIR_SENSOR_MAX_SENSORS);
 }

usermods/PWM_fan/readme.md

@@ -5,7 +5,7 @@ v2 Usermod to to control PWM fan with RPM feedback and temperature control
 This usermod requires the Dallas Temperature usermod to obtain temperature information. If it's not available, the fan will run at 100% speed.
 If the fan does not have _tachometer_ (RPM) output you can set the _tachometer-pin_ to -1 to disable that feature.
 
-You can also set the thershold temperature at which fan runs at lowest speed. If the measured temperature is 3°C greater than the threshold temperature, the fan will run at 100%.
+You can also set the threshold temperature at which fan runs at lowest speed. If the measured temperature is 3°C greater than the threshold temperature, the fan will run at 100%.
 
 If the _tachometer_ is supported, the current speed (in RPM) will be displayed on the WLED Info page.
 
@@ -22,7 +22,7 @@ This includes:
 * PWM output pin (can be configured at compile time `-D PWM_PIN=xx`)
 * tachometer input pin (can be configured at compile time `-D TACHO_PIN=xx`)
 * sampling frequency in seconds
-* threshold temperature in degees C
+* threshold temperature in degrees Celsius
 
 _NOTE:_ You may also need to tweak Dallas Temperature usermod sampling frequency to match PWM fan sampling frequency.
 

usermods/PWM_fan/usermod_PWM_fan.h

@@ -52,9 +52,15 @@ class PWMFanUsermod : public Usermod {
     uint8_t tachoUpdateSec    = 30;
     float   targetTemperature = 35.0;
     uint8_t minPWMValuePct    = 0;
+    uint8_t maxPWMValuePct    = 100;
     uint8_t numberOfInterrupsInOneSingleRotation = 2;     // Number of interrupts ESP32 sees on tacho signal on a single fan rotation. All the fans I've seen trigger two interrups.
     uint8_t pwmValuePct       = 0;
 
+    // constant values
+    static const uint8_t _pwmMaxValue     = 255;
+    static const uint8_t _pwmMaxStepCount = 7;
+    float _pwmTempStepSize = 0.5f;
+
     // strings to reduce flash memory usage (used more than twice)
     static const char _name[];
     static const char _enabled[];
@@ -63,6 +69,7 @@ class PWMFanUsermod : public Usermod {
     static const char _temperature[];
     static const char _tachoUpdateSec[];
     static const char _minPWMValuePct[];
+    static const char _maxPWMValuePct[];
     static const char _IRQperRotation[];
     static const char _speed[];
     static const char _lock[];
@@ -156,38 +163,32 @@ class PWMFanUsermod : public Usermod {
 
     void setFanPWMbasedOnTemperature(void) {
       float temp = getActualTemperature();
-      float difftemp = temp - targetTemperature;
-      // Default to run fan at full speed.
-      int newPWMvalue = 255;
-      int pwmStep = ((100 - minPWMValuePct) * newPWMvalue) / (7*100);
-      int pwmMinimumValue = (minPWMValuePct * newPWMvalue) / 100;
+      // dividing minPercent and maxPercent into equal pwmvalue sizes
+      int pwmStepSize = ((maxPWMValuePct - minPWMValuePct) * _pwmMaxValue) / (_pwmMaxStepCount*100);
+      int pwmStep = calculatePwmStep(temp - targetTemperature);
+      // minimum based on full speed - not entered MaxPercent 
+      int pwmMinimumValue = (minPWMValuePct * _pwmMaxValue) / 100;
+      updateFanSpeed(pwmMinimumValue + pwmStep*pwmStepSize);
+    }
 
-      if ((temp == NAN) || (temp <= -100.0)) {
+    uint8_t calculatePwmStep(float diffTemp){
+      if ((diffTemp == NAN) || (diffTemp <= -100.0)) {
         DEBUG_PRINTLN(F("WARNING: no temperature value available. Cannot do temperature control. Will set PWM fan to 255."));
-      } else if (difftemp <= 0.0) {
-        // Temperature is below target temperature. Run fan at minimum speed.
-        newPWMvalue = pwmMinimumValue;
-      } else if (difftemp <= 0.5) {
-        newPWMvalue = pwmMinimumValue + pwmStep;
-      } else if (difftemp <= 1.0) {
-        newPWMvalue = pwmMinimumValue + 2*pwmStep;
-      } else if (difftemp <= 1.5) {
-        newPWMvalue = pwmMinimumValue + 3*pwmStep;
-      } else if (difftemp <= 2.0) {
-        newPWMvalue = pwmMinimumValue + 4*pwmStep;
-      } else if (difftemp <= 2.5) {
-        newPWMvalue = pwmMinimumValue + 5*pwmStep;
-      } else if (difftemp <= 3.0) {
-        newPWMvalue = pwmMinimumValue + 6*pwmStep;
+        return _pwmMaxStepCount;
       }
-      updateFanSpeed(newPWMvalue);
+      if(diffTemp <=0){
+        return 0;
+      }
+      int calculatedStep = (diffTemp / _pwmTempStepSize)+1;
+      // anything greater than max stepcount gets max 
+      return (uint8_t)min((int)_pwmMaxStepCount,calculatedStep);      
     }
 
   public:
 
     // gets called once at boot. Do all initialization that doesn't depend on
     // network here
-    void setup() {
+    void setup() override {
       #ifdef USERMOD_DALLASTEMPERATURE   
       // This Usermod requires Temperature usermod
       tempUM = (UsermodTemperature*) usermods.lookup(USERMOD_ID_TEMPERATURE);
@@ -202,12 +203,12 @@ class PWMFanUsermod : public Usermod {
 
     // gets called every time WiFi is (re-)connected. Initialize own network
     // interfaces here
-    void connected() {}
+    void connected() override {}
 
     /*
      * Da loop.
      */
-    void loop() {
+    void loop() override {
       if (!enabled || strip.isUpdating()) return;
 
       unsigned long now = millis();
@@ -222,7 +223,7 @@ class PWMFanUsermod : public Usermod {
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
      * Below it is shown how this could be used for e.g. a light sensor
      */
-    void addToJsonInfo(JsonObject& root) {
+    void addToJsonInfo(JsonObject& root) override {
       JsonObject user = root["u"];
       if (user.isNull()) user = root.createNestedObject("u");
 
@@ -271,7 +272,7 @@ class PWMFanUsermod : public Usermod {
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void readFromJsonState(JsonObject& root) {
+    void readFromJsonState(JsonObject& root) override {
       if (!initDone) return;  // prevent crash on boot applyPreset()
       JsonObject usermod = root[FPSTR(_name)];
       if (!usermod.isNull()) {
@@ -304,7 +305,7 @@ class PWMFanUsermod : public Usermod {
      * 
      * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
      */
-    void addToConfig(JsonObject& root) {
+    void addToConfig(JsonObject& root) override {
       JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
       top[FPSTR(_enabled)]        = enabled;
       top[FPSTR(_pwmPin)]         = pwmPin;
@@ -312,6 +313,7 @@ class PWMFanUsermod : public Usermod {
       top[FPSTR(_tachoUpdateSec)] = tachoUpdateSec;
       top[FPSTR(_temperature)]    = targetTemperature;
       top[FPSTR(_minPWMValuePct)] = minPWMValuePct;
+      top[FPSTR(_maxPWMValuePct)] = maxPWMValuePct;
       top[FPSTR(_IRQperRotation)] = numberOfInterrupsInOneSingleRotation;
       DEBUG_PRINTLN(F("Autosave config saved."));
     }
@@ -326,7 +328,7 @@ class PWMFanUsermod : public Usermod {
      * 
      * The function should return true if configuration was successfully loaded or false if there was no configuration.
      */
-    bool readFromConfig(JsonObject& root) {
+    bool readFromConfig(JsonObject& root) override {
       int8_t newTachoPin = tachoPin;
       int8_t newPwmPin   = pwmPin;
 
@@ -345,6 +347,8 @@ class PWMFanUsermod : public Usermod {
       targetTemperature = top[FPSTR(_temperature)] | targetTemperature;
       minPWMValuePct    = top[FPSTR(_minPWMValuePct)] | minPWMValuePct;
       minPWMValuePct    = (uint8_t) min(100,max(0,(int)minPWMValuePct)); // bounds checking
+      maxPWMValuePct    = top[FPSTR(_maxPWMValuePct)] | maxPWMValuePct;
+      maxPWMValuePct    = (uint8_t) min(100,max((int)minPWMValuePct,(int)maxPWMValuePct)); // bounds checking
       numberOfInterrupsInOneSingleRotation = top[FPSTR(_IRQperRotation)] | numberOfInterrupsInOneSingleRotation;
       numberOfInterrupsInOneSingleRotation = (uint8_t) max(1,(int)numberOfInterrupsInOneSingleRotation); // bounds checking
 
@@ -376,7 +380,7 @@ class PWMFanUsermod : public Usermod {
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
      * This could be used in the future for the system to determine whether your usermod is installed.
      */
-    uint16_t getId() {
+    uint16_t getId() override {
         return USERMOD_ID_PWM_FAN;
     }
 };
@@ -389,6 +393,7 @@ const char PWMFanUsermod::_pwmPin[]         PROGMEM = "PWM-pin";
 const char PWMFanUsermod::_temperature[]    PROGMEM = "target-temp-C";
 const char PWMFanUsermod::_tachoUpdateSec[] PROGMEM = "tacho-update-s";
 const char PWMFanUsermod::_minPWMValuePct[] PROGMEM = "min-PWM-percent";
+const char PWMFanUsermod::_maxPWMValuePct[] PROGMEM = "max-PWM-percent";
 const char PWMFanUsermod::_IRQperRotation[] PROGMEM = "IRQs-per-rotation";
 const char PWMFanUsermod::_speed[]          PROGMEM = "speed";
 const char PWMFanUsermod::_lock[]           PROGMEM = "lock";

usermods/RelayBlinds/usermod.cpp

@@ -43,12 +43,12 @@ void handleRelay()
       digitalWrite(PIN_UP_RELAY, LOW);
       upActiveBefore = true;
       upStartTime = millis();
-      DEBUG_PRINTLN("UPA");
+      DEBUG_PRINTLN(F("UPA"));
     }
     if (millis()- upStartTime > PIN_ON_TIME)
     {
       upActive = false;
-      DEBUG_PRINTLN("UPN");
+      DEBUG_PRINTLN(F("UPN"));
     }
   } else if (upActiveBefore)
   {

usermods/SN_Photoresistor/usermod_sn_photoresistor.h

@@ -3,7 +3,9 @@
 #include "wled.h"
 
 //Pin defaults for QuinLed Dig-Uno (A0)
+#ifndef PHOTORESISTOR_PIN
 #define PHOTORESISTOR_PIN A0
+#endif
 
 // the frequency to check photoresistor, 10 seconds
 #ifndef USERMOD_SN_PHOTORESISTOR_MEASUREMENT_INTERVAL
@@ -30,7 +32,7 @@
 #define USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE 10000.0f
 #endif
 
-// only report if differance grater than offset value
+// only report if difference grater than offset value
 #ifndef USERMOD_SN_PHOTORESISTOR_OFFSET_VALUE
 #define USERMOD_SN_PHOTORESISTOR_OFFSET_VALUE 5
 #endif
@@ -119,7 +121,7 @@ public:
       }
       else
       {
-        DEBUG_PRINTLN("Missing MQTT connection. Not publishing data");
+        DEBUG_PRINTLN(F("Missing MQTT connection. Not publishing data"));
       }
     }
 #endif
@@ -207,4 +209,4 @@ const char Usermod_SN_Photoresistor::_readInterval[] PROGMEM = "read-interval-s"
 const char Usermod_SN_Photoresistor::_referenceVoltage[] PROGMEM = "supplied-voltage";
 const char Usermod_SN_Photoresistor::_resistorValue[] PROGMEM = "resistor-value";
 const char Usermod_SN_Photoresistor::_adcPrecision[] PROGMEM = "adc-precision";
-const char Usermod_SN_Photoresistor::_offset[] PROGMEM = "offset";
+const char Usermod_SN_Photoresistor::_offset[] PROGMEM = "offset";

usermods/ST7789_display/ST7789_display.h

@@ -132,7 +132,7 @@ class St7789DisplayUsermod : public Usermod {
      * setup() is called once at boot. WiFi is not yet connected at this point.
      * You can use it to initialize variables, sensors or similar.
      */
-    void setup()
+    void setup() override
     {
         PinManagerPinType spiPins[] = { { spi_mosi, true }, { spi_miso, false}, { spi_sclk, true } };
         if (!pinManager.allocateMultiplePins(spiPins, 3, PinOwner::HW_SPI)) { enabled = false; return; }
@@ -162,7 +162,7 @@ class St7789DisplayUsermod : public Usermod {
      * connected() is called every time the WiFi is (re)connected
      * Use it to initialize network interfaces
      */
-    void connected() {
+    void connected() override {
       //Serial.println("Connected to WiFi!");
     }
 
@@ -176,7 +176,7 @@ class St7789DisplayUsermod : public Usermod {
      * 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
      *    Instead, use a timer check as shown here.
      */
-    void loop() {
+    void loop() override {
         char buff[LINE_BUFFER_SIZE];
 
         // Check if we time interval for redrawing passes.
@@ -307,7 +307,7 @@ class St7789DisplayUsermod : public Usermod {
         // Print estimated milliamp usage (must specify the LED type in LED prefs for this to be a reasonable estimate).
         tft.print("Current: ");
         tft.setTextColor(TFT_ORANGE);
-        tft.print(strip.currentMilliamps);
+        tft.print(BusManager::currentMilliamps());
         tft.print("mA");
     }
 
@@ -316,7 +316,7 @@ class St7789DisplayUsermod : public Usermod {
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
      * Below it is shown how this could be used for e.g. a light sensor
      */
-    void addToJsonInfo(JsonObject& root)
+    void addToJsonInfo(JsonObject& root) override
     {
       JsonObject user = root["u"];
       if (user.isNull()) user = root.createNestedObject("u");
@@ -330,7 +330,7 @@ class St7789DisplayUsermod : public Usermod {
      * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void addToJsonState(JsonObject& root)
+    void addToJsonState(JsonObject& root) override
     {
       //root["user0"] = userVar0;
     }
@@ -340,7 +340,7 @@ class St7789DisplayUsermod : public Usermod {
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void readFromJsonState(JsonObject& root)
+    void readFromJsonState(JsonObject& root) override
     {
       //userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
       //if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
@@ -361,7 +361,7 @@ class St7789DisplayUsermod : public Usermod {
      *
      * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
      */
-    void addToConfig(JsonObject& root)
+    void addToConfig(JsonObject& root) override
     {
       JsonObject top = root.createNestedObject("ST7789");
       JsonArray pins = top.createNestedArray("pin");
@@ -373,7 +373,7 @@ class St7789DisplayUsermod : public Usermod {
     }
 
 
-    void appendConfigData() {
+    void appendConfigData() override {
       oappend(SET_F("addInfo('ST7789:pin[]',0,'','SPI CS');"));
       oappend(SET_F("addInfo('ST7789:pin[]',1,'','SPI DC');"));
       oappend(SET_F("addInfo('ST7789:pin[]',2,'','SPI RST');"));
@@ -388,7 +388,7 @@ class St7789DisplayUsermod : public Usermod {
      * but also that if you want to write persistent values to a dynamic buffer, you'd need to allocate it here instead of in setup.
      * If you don't know what that is, don't fret. It most likely doesn't affect your use case :)
      */
-    bool readFromConfig(JsonObject& root)
+    bool readFromConfig(JsonObject& root) override
     {
       //JsonObject top = root["top"];
       //userVar0 = top["great"] | 42; //The value right of the pipe "|" is the default value in case your setting was not present in cfg.json (e.g. first boot)
@@ -400,7 +400,7 @@ class St7789DisplayUsermod : public Usermod {
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
      * This could be used in the future for the system to determine whether your usermod is installed.
      */
-    uint16_t getId()
+    uint16_t getId() override
     {
       return USERMOD_ID_ST7789_DISPLAY;
     }

usermods/Si7021_MQTT_HA/usermod_si7021_mqtt_ha.h

@@ -93,8 +93,8 @@ class Si7021_MQTT_HA : public Usermod
 
         JsonObject device = doc.createNestedObject("device"); // attach the sensor to the same device
         device["name"] = String(serverDescription);
-        device["model"] = "WLED";
-        device["manufacturer"] = "Aircoookie";
+        device["model"] = F(WLED_PRODUCT_NAME);
+        device["manufacturer"] = F(WLED_BRAND);
         device["identifiers"] = String("wled-") + String(serverDescription);
         device["sw_version"] = VERSION;
 

usermods/TTGO-T-Display/usermod.cpp

@@ -3,7 +3,7 @@
  * This file allows you to add own functionality to WLED more easily
  * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in const.h)
- * bytes 2400+ are currently ununsed, but might be used for future wled features
+ * bytes 2400+ are currently unused, but might be used for future wled features
  */
 
 /*
@@ -144,7 +144,7 @@ void userLoop() {
   // First row with Wifi name
   tft.setCursor(1, 1);
   tft.print(knownSsid.substring(0, tftcharwidth > 1 ? tftcharwidth - 1 : 0));
-  // Print `~` char to indicate that SSID is longer, than our dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > tftcharwidth)
     tft.print("~");
 

usermods/Temperature/readme.md

@@ -18,7 +18,7 @@ Copy the example `platformio_override.ini` to the root directory.  This file sho
 * `USERMOD_DALLASTEMPERATURE`                      - enables this user mod wled00/usermods_list.cpp
 * `USERMOD_DALLASTEMPERATURE_MEASUREMENT_INTERVAL` - number of milliseconds between measurements, defaults to 60000 ms (60s)
 
-All parameters can be configured at runtime via the Usermods settings page, including pin, temperature in degrees Celsius or Farenheit and measurement interval.
+All parameters can be configured at runtime via the Usermods settings page, including pin, temperature in degrees Celsius or Fahrenheit and measurement interval.
 
 ## Project link
 

usermods/Temperature/usermod_temperature.h

@@ -48,6 +48,7 @@ class UsermodTemperature : public Usermod {
     bool enabled = true;
 
     bool HApublished = false;
+    int16_t idx = -1;   // Domoticz virtual sensor idx
 
     // strings to reduce flash memory usage (used more than twice)
     static const char _name[];
@@ -55,7 +56,11 @@ class UsermodTemperature : public Usermod {
     static const char _readInterval[];
     static const char _parasite[];
     static const char _parasitePin[];
-
+    static const char _domoticzIDX[];
+    static const char _sensor[];
+    static const char _temperature[];
+    static const char _Temperature[];
+    
     //Dallas sensor quick (& dirty) reading. Credit to - Author: Peter Scargill, August 17th, 2013
     float readDallas();
     void requestTemperatures();
@@ -74,26 +79,26 @@ class UsermodTemperature : public Usermod {
     inline float getTemperatureF() { return temperature * 1.8f + 32.0f; }
     float getTemperature();
     const char *getTemperatureUnit();
-    uint16_t getId() { return USERMOD_ID_TEMPERATURE; }
+    uint16_t getId() override { return USERMOD_ID_TEMPERATURE; }
 
-    void setup();
-    void loop();
-    //void connected();
+    void setup() override;
+    void loop() override;
+    //void connected() override;
 #ifndef WLED_DISABLE_MQTT
-    void onMqttConnect(bool sessionPresent);
+    void onMqttConnect(bool sessionPresent) override;
 #endif
-    //void onUpdateBegin(bool init);
+    //void onUpdateBegin(bool init) override;
 
-    //bool handleButton(uint8_t b);
-    //void handleOverlayDraw();
+    //bool handleButton(uint8_t b) override;
+    //void handleOverlayDraw() override;
 
-    void addToJsonInfo(JsonObject& root);
-    //void addToJsonState(JsonObject &root);
-    //void readFromJsonState(JsonObject &root);
-    void addToConfig(JsonObject &root);
-    bool readFromConfig(JsonObject &root);
+    void addToJsonInfo(JsonObject& root) override;
+    //void addToJsonState(JsonObject &root) override;
+    //void readFromJsonState(JsonObject &root) override;
+    void addToConfig(JsonObject &root) override;
+    bool readFromConfig(JsonObject &root) override;
 
-    void appendConfigData();
+    void appendConfigData() override;
 };
 
 //Dallas sensor quick (& dirty) reading. Credit to - Author: Peter Scargill, August 17th, 2013
@@ -108,9 +113,9 @@ float UsermodTemperature::readDallas() {
     #ifdef WLED_DEBUG
     if (OneWire::crc8(data,8) != data[8]) {
       DEBUG_PRINTLN(F("CRC error reading temperature."));
-      for (byte i=0; i < 9; i++) DEBUG_PRINTF("0x%02X ", data[i]);
+      for (byte i=0; i < 9; i++) DEBUG_PRINTF_P(PSTR("0x%02X "), data[i]);
       DEBUG_PRINT(F(" => "));
-      DEBUG_PRINTF("0x%02X\n", OneWire::crc8(data,8));
+      DEBUG_PRINTF_P(PSTR("0x%02X\n"), OneWire::crc8(data,8));
     }
     #endif
     switch(sensorFound) {
@@ -147,7 +152,7 @@ void UsermodTemperature::readTemperature() {
   temperature = readDallas();
   lastMeasurement = millis();
   waitingForConversion = false;
-  //DEBUG_PRINTF("Read temperature %2.1f.\n", temperature); // does not work properly on 8266
+  //DEBUG_PRINTF_P(PSTR("Read temperature %2.1f.\n"), temperature); // does not work properly on 8266
   DEBUG_PRINT(F("Read temperature "));
   DEBUG_PRINTLN(temperature);
 }
@@ -169,7 +174,7 @@ bool UsermodTemperature::findSensor() {
         case 0x42:  // DS28EA00
           DEBUG_PRINTLN(F("Sensor found."));
           sensorFound = deviceAddress[0];
-          DEBUG_PRINTF("0x%02X\n", sensorFound);
+          DEBUG_PRINTF_P(PSTR("0x%02X\n"), sensorFound);
           return true;
       }
     }
@@ -189,9 +194,9 @@ void UsermodTemperature::publishHomeAssistantAutodiscovery() {
   sprintf_P(buf, PSTR("%s Temperature"), serverDescription);
   json[F("name")] = buf;
   strcpy(buf, mqttDeviceTopic);
-  strcat_P(buf, PSTR("/temperature"));
+  strcat_P(buf, _Temperature);
   json[F("state_topic")] = buf;
-  json[F("device_class")] = F("temperature");
+  json[F("device_class")] = FPSTR(_temperature);
   json[F("unique_id")] = escapedMac.c_str();
   json[F("unit_of_measurement")] = F("°C");
   payload_size = serializeJson(json, json_str);
@@ -264,16 +269,25 @@ void UsermodTemperature::loop() {
 
 #ifndef WLED_DISABLE_MQTT
     if (WLED_MQTT_CONNECTED) {
-      char subuf[64];
+      char subuf[128];
       strcpy(subuf, mqttDeviceTopic);
       if (temperature > -100.0f) {
         // dont publish super low temperature as the graph will get messed up
         // the DallasTemperature library returns -127C or -196.6F when problem
         // reading the sensor
-        strcat_P(subuf, PSTR("/temperature"));
+        strcat_P(subuf, _Temperature);
         mqtt->publish(subuf, 0, false, String(getTemperatureC()).c_str());
         strcat_P(subuf, PSTR("_f"));
         mqtt->publish(subuf, 0, false, String(getTemperatureF()).c_str());
+        if (idx > 0) {
+          StaticJsonDocument <128> msg;
+          msg[F("idx")]    = idx;
+          msg[F("RSSI")]   = WiFi.RSSI();
+          msg[F("nvalue")] = 0;
+          msg[F("svalue")] = String(getTemperatureC());
+          serializeJson(msg, subuf, 127);
+          mqtt->publish("domoticz/in", 0, false, subuf);
+        }
       } else {
         // publish something else to indicate status?
       }
@@ -324,9 +338,9 @@ void UsermodTemperature::addToJsonInfo(JsonObject& root) {
   temp.add(getTemperature());
   temp.add(getTemperatureUnit());
 
-  JsonObject sensor = root[F("sensor")];
-  if (sensor.isNull()) sensor = root.createNestedObject(F("sensor"));
-  temp = sensor.createNestedArray(F("temperature"));
+  JsonObject sensor = root[FPSTR(_sensor)];
+  if (sensor.isNull()) sensor = root.createNestedObject(FPSTR(_sensor));
+  temp = sensor.createNestedArray(FPSTR(_temperature));
   temp.add(getTemperature());
   temp.add(getTemperatureUnit());
 }
@@ -356,10 +370,11 @@ void UsermodTemperature::addToConfig(JsonObject &root) {
   JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
   top[FPSTR(_enabled)] = enabled;
   top["pin"]  = temperaturePin;     // usermodparam
-  top["degC"] = degC;  // usermodparam
+  top[F("degC")] = degC;  // usermodparam
   top[FPSTR(_readInterval)] = readingInterval / 1000;
   top[FPSTR(_parasite)] = parasite;
   top[FPSTR(_parasitePin)] = parasitePin;
+  top[FPSTR(_domoticzIDX)] = idx;
   DEBUG_PRINTLN(F("Temperature config saved."));
 }
 
@@ -381,11 +396,12 @@ bool UsermodTemperature::readFromConfig(JsonObject &root) {
 
   enabled           = top[FPSTR(_enabled)] | enabled;
   newTemperaturePin = top["pin"] | newTemperaturePin;
-  degC              = top["degC"] | degC;
+  degC              = top[F("degC")] | degC;
   readingInterval   = top[FPSTR(_readInterval)] | readingInterval/1000;
   readingInterval   = min(120,max(10,(int)readingInterval)) * 1000;  // convert to ms
   parasite          = top[FPSTR(_parasite)] | parasite;
   parasitePin       = top[FPSTR(_parasitePin)] | parasitePin;
+  idx               = top[FPSTR(_domoticzIDX)] | idx;
 
   if (!initDone) {
     // first run: reading from cfg.json
@@ -406,7 +422,7 @@ bool UsermodTemperature::readFromConfig(JsonObject &root) {
     }
   }
   // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
-  return !top[FPSTR(_parasitePin)].isNull();
+  return !top[FPSTR(_domoticzIDX)].isNull();
 }
 
 void UsermodTemperature::appendConfigData() {
@@ -430,3 +446,7 @@ const char UsermodTemperature::_enabled[]      PROGMEM = "enabled";
 const char UsermodTemperature::_readInterval[] PROGMEM = "read-interval-s";
 const char UsermodTemperature::_parasite[]     PROGMEM = "parasite-pwr";
 const char UsermodTemperature::_parasitePin[]  PROGMEM = "parasite-pwr-pin";
+const char UsermodTemperature::_domoticzIDX[]  PROGMEM = "domoticz-idx";
+const char UsermodTemperature::_sensor[]       PROGMEM = "sensor";
+const char UsermodTemperature::_temperature[]  PROGMEM = "temperature";
+const char UsermodTemperature::_Temperature[]  PROGMEM = "/temperature";

usermods/TetrisAI_v2/gridbw.h

@@ -0,0 +1,128 @@
+/******************************************************************************
+  * @file           : gridbw.h
+  * @brief          : contains the tetris grid as binary so black and white version
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2023
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __GRIDBW_H__
+#define __GRIDBW_H__
+
+#include <iterator>
+#include <vector>
+#include "pieces.h"
+
+using namespace std;
+
+class GridBW
+{
+private:
+public:
+    uint8_t width;
+    uint8_t height;
+    std::vector<uint32_t> pixels;
+
+    GridBW(uint8_t width, uint8_t height):
+        width(width),
+        height(height),
+        pixels(height)
+    {
+        if (width > 32)
+        {
+            this->width = 32;
+        }
+    }
+
+    void placePiece(Piece* piece, uint8_t x, uint8_t y)
+    {
+        for (uint8_t row = 4 - piece->getRotation().height; row < 4; row++)
+        {
+            pixels[y + (row - (4 - piece->getRotation().height))] |= piece->getGridRow(x, row, width);
+        }
+    }
+
+    void erasePiece(Piece* piece, uint8_t x, uint8_t y)
+    {
+        for (uint8_t row = 4 - piece->getRotation().height; row < 4; row++)
+        {
+            pixels[y + (row - (4 - piece->getRotation().height))] &= ~piece->getGridRow(x, row, width);
+        }
+    }
+
+    bool noCollision(Piece* piece, uint8_t x, uint8_t y)
+    {
+        //if it touches a wall it is a collision
+        if (x > (this->width - piece->getRotation().width) || y > this->height - piece->getRotation().height)
+        {
+            return false;
+        }
+
+        for (uint8_t row = 4 - piece->getRotation().height; row < 4; row++)
+        {
+            if (piece->getGridRow(x, row, width) & pixels[y + (row - (4 - piece->getRotation().height))])
+            {
+                return false;
+            }
+        }
+        return true;
+    }
+
+    void findLandingPosition(Piece* piece)
+    {
+        // move down until the piece bumps into some occupied pixels or the 'wall'
+        while (noCollision(piece, piece->x, piece->landingY))
+        {
+            piece->landingY++;
+        }
+
+        //at this point the positon is 'in the wall' or 'over some occupied pixel'
+        //so the previous position was the last correct one (clamped to 0 as minimum).
+        piece->landingY = piece->landingY > 0 ? piece->landingY - 1 : 0;
+    }
+
+    void cleanupFullLines()
+    {
+        uint8_t offset = 0;
+
+        //from "height - 1" to "0", so from bottom row to top
+        for (uint8_t row = height; row-- > 0; )
+        {
+            //full line?
+            if (isLineFull(row))
+            {
+                offset++;
+                pixels[row] = 0x0;
+                continue;
+            }
+
+            if (offset > 0)
+            {
+                pixels[row + offset] = pixels[row];
+                pixels[row] = 0x0;
+            }
+        }
+    }
+
+    bool isLineFull(uint8_t y)
+    {
+        return pixels[y] == (uint32_t)((1 << width) - 1);
+    }
+
+    void reset()
+    {
+        if (width > 32)
+        {
+            width = 32;
+        }
+
+        pixels.clear();
+        pixels.resize(height);
+    }
+};
+
+#endif /* __GRIDBW_H__ */

usermods/TetrisAI_v2/gridcolor.h

@@ -0,0 +1,140 @@
+/******************************************************************************
+  * @file           : gridcolor.h
+  * @brief          : contains the tetris grid as 8bit indexed color version
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2023
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __GRIDCOLOR_H__
+#define __GRIDCOLOR_H__
+#include <stdint.h>
+#include <stdbool.h>
+#include <vector>
+#include "gridbw.h"
+#include "gridcolor.h"
+
+using namespace std;
+
+class GridColor
+{
+private:
+public:
+    uint8_t width;
+    uint8_t height;
+    GridBW gridBW;
+    std::vector<uint8_t> pixels;
+
+    GridColor(uint8_t width, uint8_t height):
+        width(width),
+        height(height),
+        gridBW(width, height),
+        pixels(width* height)
+    {}
+
+    void clear()
+    {
+        for (uint8_t y = 0; y < height; y++)
+        {
+            gridBW.pixels[y] = 0x0;
+            for (int8_t x = 0; x < width; x++)
+            {
+                *getPixel(x, y) = 0;
+            }
+        }
+    }
+
+    void placePiece(Piece* piece, uint8_t x, uint8_t y)
+    {
+        for (uint8_t pieceY = 0; pieceY < piece->getRotation().height; pieceY++)
+        {
+            for (uint8_t pieceX = 0; pieceX < piece->getRotation().width; pieceX++)
+            {
+                if (piece->getPixel(pieceX, pieceY))
+                {
+                    *getPixel(x + pieceX, y + pieceY) = piece->pieceData->colorIndex;
+                }
+            }
+        }
+    }
+
+    void erasePiece(Piece* piece, uint8_t x, uint8_t y)
+    {
+        for (uint8_t pieceY = 0; pieceY < piece->getRotation().height; pieceY++)
+        {
+            for (uint8_t pieceX = 0; pieceX < piece->getRotation().width; pieceX++)
+            {
+                if (piece->getPixel(pieceX, pieceY))
+                {
+                    *getPixel(x + pieceX, y + pieceY) = 0;
+                }
+            }
+        }
+    }
+
+    void cleanupFullLines()
+    {
+        uint8_t offset = 0;
+        //from "height - 1" to "0", so from bottom row to top
+        for (uint8_t y = height; y-- > 0; )
+        {
+            if (gridBW.isLineFull(y))
+            {
+                offset++;
+                for (uint8_t x = 0; x < width; x++)
+                {
+                    pixels[y * width + x] = 0;
+                }
+                continue;
+            }
+
+            if (offset > 0)
+            {
+                if (gridBW.pixels[y])
+                {
+                    for (uint8_t x = 0; x < width; x++)
+                    {
+                        pixels[(y + offset) * width + x] = pixels[y * width + x];
+                        pixels[y * width + x] = 0;
+                    }
+                }
+            }
+        }
+        gridBW.cleanupFullLines();
+    }
+
+    uint8_t* getPixel(uint8_t x, uint8_t y)
+    {
+        return &pixels[y * width + x];
+    }
+
+    void sync()
+    {
+        for (uint8_t y = 0; y < height; y++)
+        {
+            gridBW.pixels[y] = 0x0;
+            for (int8_t x = 0; x < width; x++)
+            {
+                gridBW.pixels[y] <<= 1;
+                if (*getPixel(x, y) != 0)
+                {
+                    gridBW.pixels[y] |= 0x1;
+                }
+            }
+        }
+    }
+
+    void reset()
+    {
+        gridBW.reset();
+        pixels.clear();
+        pixels.resize(width* height);
+        clear();
+    }
+};
+
+#endif /* __GRIDCOLOR_H__ */

usermods/TetrisAI_v2/pieces.h

@@ -0,0 +1,184 @@
+/******************************************************************************
+  * @file           : pieces.h
+  * @brief          : contains the tetris pieces with their colors indecies
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2022
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __PIECES_H__
+#define __PIECES_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <bitset>
+#include <cstddef>
+#include <cassert>
+#include <iostream>
+
+#define numPieces 7
+
+struct PieceRotation
+{
+    uint8_t width;
+    uint8_t height;
+    uint16_t rows;
+};
+
+struct PieceData
+{
+    uint8_t rotCount;
+    uint8_t colorIndex;
+    PieceRotation rotations[4];
+};
+
+PieceData piecesData[numPieces] = {
+    // I
+    {
+            2,
+            1,
+            {
+                { 1, 4, 0b0001000100010001},
+                { 4, 1, 0b0000000000001111}
+            }
+    },
+    // O
+    {
+            1,
+            2,
+            {
+                { 2, 2, 0b0000000000110011}
+            }
+    },
+    // Z
+    {
+            2,
+            3,
+            {
+                { 3, 2, 0b0000000001100011},
+                { 2, 3, 0b0000000100110010}
+            }
+    },
+    // S
+    {
+            2,
+            4,
+            {
+                { 3, 2, 0b0000000000110110},
+                { 2, 3, 0b0000001000110001}
+            }
+    },
+    // L
+    {
+            4,
+            5,
+            {
+                { 2, 3, 0b0000001000100011},
+                { 3, 2, 0b0000000001110100},
+                { 2, 3, 0b0000001100010001},
+                { 3, 2, 0b0000000000010111}
+            }
+    },
+    // J
+    {
+            4,
+            6,
+            {
+                { 2, 3, 0b0000000100010011},
+                { 3, 2, 0b0000000001000111},
+                { 2, 3, 0b0000001100100010},
+                { 3, 2, 0b0000000001110001}
+            }
+    },
+    // T
+    {
+            4,
+            7,
+            {
+                { 3, 2, 0b0000000001110010},
+                { 2, 3, 0b0000000100110001},
+                { 3, 2, 0b0000000000100111},
+                { 2, 3, 0b0000001000110010}
+            }
+    },
+};
+
+class Piece
+{
+private:
+public:
+    uint8_t x;
+    uint8_t y;
+    PieceData* pieceData;
+    uint8_t rotation;
+    uint8_t landingY;
+
+    Piece(uint8_t pieceIndex = 0):
+        x(0),
+        y(0),
+        rotation(0),
+        landingY(0)
+    {
+        this->pieceData = &piecesData[pieceIndex];
+    }
+
+    void reset()
+    {
+        this->rotation = 0;
+        this->x = 0;
+        this->y = 0;
+        this->landingY = 0;
+    }
+
+    uint32_t getGridRow(uint8_t x, uint8_t y, uint8_t width)
+    {
+        if (x < width)
+        {
+            //shift the row with the "top-left" position to the "x" position
+            auto shiftx = (width - 1) - x;
+            auto topleftx = (getRotation().width - 1);
+
+            auto finalShift = shiftx - topleftx;
+            auto row = getRow(y);
+            auto finalResult = row << finalShift;
+
+            return finalResult;
+        }
+        return 0xffffffff;
+    }
+
+    uint8_t getRow(uint8_t y)
+    {
+        if (y < 4)
+        {
+            return (getRotation().rows >> (12 - (4 * y))) & 0xf;
+        }
+        return 0xf;
+    }
+
+    bool getPixel(uint8_t x, uint8_t y)
+    {
+        if(x > getRotation().width - 1 || y > getRotation().height - 1 )
+        {
+            return false;
+        }
+        
+        if (x < 4 && y < 4)
+        {
+            return (getRow((4 - getRotation().height) + y) >> (3 - ((4 - getRotation().width) + x))) & 0x1;
+        }
+        return false;
+    }
+
+    PieceRotation getRotation()
+    {
+        return this->pieceData->rotations[rotation];
+    }
+};
+
+#endif /* __PIECES_H__ */

usermods/TetrisAI_v2/rating.h

@@ -0,0 +1,64 @@
+/******************************************************************************
+  * @file           : rating.h
+  * @brief          : contains the tetris rating of a grid
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2022
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __RATING_H__
+#define __RATING_H__
+
+#include <stdint.h>
+#include <float.h>
+#include <stdbool.h>
+#include <math.h>
+#include <vector>
+#include "rating.h"
+
+using namespace std;
+
+class Rating
+{
+private:
+public:
+    uint8_t minHeight;
+    uint8_t maxHeight;
+    uint16_t holes;
+    uint8_t fullLines;
+    uint16_t bumpiness;
+    uint16_t aggregatedHeight;
+    float score;
+    uint8_t width;
+    std::vector<uint8_t> lineHights;
+
+    Rating(uint8_t width):
+        width(width),
+        lineHights(width)
+    {
+        reset();
+    }
+
+    void reset()
+    {
+        this->minHeight = 0;
+        this->maxHeight = 0;
+
+        for (uint8_t line = 0; line < this->width; line++)
+        {
+            this->lineHights[line] = 0;
+        }
+
+        this->holes = 0;
+        this->fullLines = 0;
+        this->bumpiness = 0;
+        this->aggregatedHeight = 0;
+        this->score = -FLT_MAX;
+    }
+};
+
+#endif /* __RATING_H__ */

usermods/TetrisAI_v2/readme.md

@@ -0,0 +1,42 @@
+# Tetris AI effect usermod
+
+This usermod adds a self-playing Tetris game as an 'effect'. The mod requires version 0.14 or higher as it relies on matrix support. The effect was tested on an ESP32 4MB with a WS2812B 16x16 matrix.
+
+Version 1.0
+
+## Installation 
+
+Just activate the usermod with `-D USERMOD_TETRISAI` and the effect will become available under the name 'Tetris AI'. If you are running out of flash memory, use a different memory layout (e.g. [WLED_ESP32_4MB_256KB_FS.csv](https://github.com/Aircoookie/WLED/blob/main/tools/WLED_ESP32_4MB_256KB_FS.csv)).
+
+If needed simply add to `platformio_override.ini` (or `platformio_override.ini`):
+
+```ini
+board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv
+```
+
+## Usage
+
+It is best to set the background color to black 🖤, the border color to light grey 🤍, the game over color (foreground) to dark grey 🩶, and color palette to 'Rainbow' 🌈.
+
+### Sliders and boxes
+
+#### Sliders
+
+* speed: speed the game plays
+* look ahead: how many pieces is the AI allowed to know the next pieces (0 - 2)
+* intelligence: how good the AI will play
+* Rotate color: make the colors shift (rotate) every few moves
+* Mistakes free: how many good moves between mistakes (if enabled)
+
+#### Checkboxes
+
+* show next: if true, a space of 5 pixels from the right will be used to show the next pieces. Otherwise the whole segment is used for the grid.
+* show border: if true an additional column of 1 pixel is used to draw a border between the grid and the next pieces
+* mistakes: if true, the worst decision will be made every few moves instead of the best (see above).
+
+## Best results
+
+ If the speed is set to be a little bit faster than a good human could play with maximal intelligence and very few mistakes it makes people furious/happy at a party 😉.
+
+## Limits
+The game grid is limited to a maximum width of 32 and a maximum height of 255 due to the internal structure of the code. The canvas of the effect will be centred in the segment if the segment exceeds the maximum width or height.

usermods/TetrisAI_v2/tetrisai.h

@@ -0,0 +1,207 @@
+/******************************************************************************
+  * @file           : ai.h
+  * @brief          : contains the heuristic
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2023
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __AI_H__
+#define __AI_H__
+
+#include "gridbw.h"
+#include "rating.h"
+
+using namespace std;
+
+class TetrisAI
+{
+private:
+public:
+    float aHeight;
+    float fullLines;
+    float holes;
+    float bumpiness;
+    bool findWorstMove = false;
+
+    uint8_t countOnes(uint32_t vector)
+    {
+        uint8_t count = 0;
+        while (vector)
+        {
+            vector &= (vector - 1);
+            count++;
+        }
+        return count;
+    }
+
+    void updateRating(GridBW grid, Rating* rating)
+    {
+        rating->minHeight = 0;
+        rating->maxHeight = 0;
+        rating->holes = 0;
+        rating->fullLines = 0;
+        rating->bumpiness = 0;
+        rating->aggregatedHeight = 0;
+        fill(rating->lineHights.begin(), rating->lineHights.end(), 0);
+
+        uint32_t columnvector = 0x0;
+        uint32_t lastcolumnvector = 0x0;
+        for (uint8_t row = 0; row < grid.height; row++)
+        {
+            columnvector |= grid.pixels[row];
+
+            //first (highest) column makes it
+            if (rating->maxHeight == 0 && columnvector)
+            {
+                rating->maxHeight = grid.height - row;
+            }
+
+            //if column vector is full we found the minimal height (or it stays zero)
+            if (rating->minHeight == 0 && (columnvector == (uint32_t)((1 << grid.width) - 1)))
+            {
+                rating->minHeight = grid.height - row;
+            }
+
+            //line full if all ones in mask :-)
+            if (grid.isLineFull(row))
+            {
+                rating->fullLines++;
+            }
+
+            //holes are basically a XOR with the "full" columns
+            rating->holes += countOnes(columnvector ^ grid.pixels[row]);
+
+            //calculate the difference (XOR) between the current column vector and the last one
+            uint32_t columnDelta = columnvector ^ lastcolumnvector;
+
+            //process every new column
+            uint8_t index = 0;
+            while (columnDelta)
+            {
+                //if this is a new column
+                if (columnDelta & 0x1)
+                {
+                    //update hight of this column
+                    rating->lineHights[(grid.width - 1) - index] = grid.height - row;
+
+                    // update aggregatedHeight
+                    rating->aggregatedHeight += grid.height - row;
+                }
+                index++;
+                columnDelta >>= 1;
+            }
+            lastcolumnvector = columnvector;
+        }
+
+        //compare every two columns to get the difference and add them up
+        for (uint8_t column = 1; column < grid.width; column++)
+        {
+            rating->bumpiness += abs(rating->lineHights[column - 1] - rating->lineHights[column]);
+        }
+
+        rating->score = (aHeight * (rating->aggregatedHeight)) + (fullLines * (rating->fullLines)) + (holes * (rating->holes)) + (bumpiness * (rating->bumpiness));
+    }
+
+    TetrisAI(): TetrisAI(-0.510066f, 0.760666f, -0.35663f, -0.184483f)
+    {}
+
+    TetrisAI(float aHeight, float fullLines, float holes, float bumpiness):
+        aHeight(aHeight),
+        fullLines(fullLines),
+        holes(holes),
+        bumpiness(bumpiness)
+    {}
+
+    void findBestMove(GridBW grid, Piece *piece)
+    {
+        vector<Piece> pieces = {*piece};
+        findBestMove(grid, &pieces);
+        *piece = pieces[0];
+    }
+
+    void findBestMove(GridBW grid, std::vector<Piece> *pieces)
+    {
+        findBestMove(grid, pieces->begin(), pieces->end());
+    }
+
+    void findBestMove(GridBW grid, std::vector<Piece>::iterator start, std::vector<Piece>::iterator end)
+    {
+        Rating bestRating(grid.width);
+        findBestMove(grid, start, end, &bestRating);
+    }
+
+    void findBestMove(GridBW grid, std::vector<Piece>::iterator start, std::vector<Piece>::iterator end, Rating* bestRating)
+    {
+        grid.cleanupFullLines();
+        Rating curRating(grid.width);
+        Rating deeperRating(grid.width);
+        Piece piece = *start;
+
+        // for every rotation of the piece
+        for (piece.rotation = 0; piece.rotation < piece.pieceData->rotCount; piece.rotation++)
+        {
+            // put piece to top left corner
+            piece.x = 0;
+            piece.y = 0;
+
+            //test for every column
+            for (piece.x = 0; piece.x <= grid.width - piece.getRotation().width; piece.x++)
+            {
+                //todo optimise by the use of the previous grids height
+                piece.landingY = 0;
+                //will set landingY to final position
+                grid.findLandingPosition(&piece);
+
+                // draw piece
+                grid.placePiece(&piece, piece.x, piece.landingY);
+
+                if(start == end - 1)
+                {
+                    //at the deepest level
+                    updateRating(grid, &curRating);
+                }
+                else
+                {
+                    //go deeper to take another piece into account
+                    findBestMove(grid, start + 1, end, &deeperRating);
+                    curRating = deeperRating;
+                }
+
+                // eraese piece
+                grid.erasePiece(&piece, piece.x, piece.landingY);
+
+                if(findWorstMove)
+                {
+                    //init rating for worst
+                    if(bestRating->score == -FLT_MAX)
+                    {
+                        bestRating->score = FLT_MAX;
+                    }
+
+                    // update if we found a worse one
+                    if (bestRating->score > curRating.score)
+                    {
+                        *bestRating = curRating;
+                        (*start) = piece;
+                    }
+                }
+                else
+                {
+                    // update if we found a better one
+                    if (bestRating->score < curRating.score)
+                    {
+                        *bestRating = curRating;
+                        (*start) = piece;
+                    }
+                }
+            }
+        }
+    }
+};
+
+#endif /* __AI_H__ */

usermods/TetrisAI_v2/tetrisaigame.h

@@ -0,0 +1,154 @@
+/******************************************************************************
+  * @file           : tetrisaigame.h
+  * @brief          : main tetris functions
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2022
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __TETRISAIGAME_H__
+#define __TETRISAIGAME_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <vector>
+#include "pieces.h"
+#include "gridcolor.h"
+#include "tetrisbag.h"
+#include "tetrisai.h"
+
+using namespace std;
+
+class TetrisAIGame
+{
+private:
+    bool animateFallOfPiece(Piece* piece, bool skip)
+    {
+        if (skip || piece->y >= piece->landingY)
+        {
+            piece->y = piece->landingY;
+            grid.gridBW.placePiece(piece, piece->x, piece->landingY);
+            grid.placePiece(piece, piece->x, piece->y);
+            return false;
+        }
+        else
+        {
+            // eraese last drawing
+            grid.erasePiece(piece, piece->x, piece->y);
+
+            //move piece down
+            piece->y++;
+
+            // draw piece
+            grid.placePiece(piece, piece->x, piece->y);
+
+            return true;
+        }
+    }
+
+public:
+    uint8_t width;
+    uint8_t height;
+    uint8_t nLookAhead;
+    uint8_t nPieces;
+    TetrisBag bag;
+    GridColor grid;
+    TetrisAI ai;
+    Piece curPiece;
+    PieceData* piecesData;
+    enum States { INIT, TEST_GAME_OVER, GET_NEXT_PIECE, FIND_BEST_MOVE, ANIMATE_MOVE, ANIMATE_GAME_OVER } state = INIT;
+
+    TetrisAIGame(uint8_t width, uint8_t height, uint8_t nLookAhead, PieceData* piecesData, uint8_t nPieces):
+        width(width),
+        height(height),
+        nLookAhead(nLookAhead),
+        nPieces(nPieces),
+        bag(nPieces, 1, nLookAhead),
+        grid(width, height + 4),
+        ai(),
+        piecesData(piecesData)
+    {
+    }
+
+    void nextPiece()
+    {
+        grid.cleanupFullLines();
+        bag.queuePiece();
+    }
+
+    void findBestMove()
+    {
+        ai.findBestMove(grid.gridBW, &bag.piecesQueue);
+    }
+
+    bool animateFall(bool skip)
+    {
+        return animateFallOfPiece(&(bag.piecesQueue[0]), skip);
+    }
+
+    bool isGameOver()
+    {
+        //if there is something in the 4 lines of the hidden area the game is over
+        return grid.gridBW.pixels[0] || grid.gridBW.pixels[1] || grid.gridBW.pixels[2] || grid.gridBW.pixels[3];
+    }
+
+    void poll()
+    {
+        switch (state)
+        {
+            case INIT:
+                reset();
+                state = TEST_GAME_OVER;
+                break;
+            case TEST_GAME_OVER:
+                if (isGameOver())
+                {
+                    state = ANIMATE_GAME_OVER;
+                }
+                else
+                {
+                    state = GET_NEXT_PIECE;
+                }
+                break;
+            case GET_NEXT_PIECE:
+                nextPiece();
+                state = FIND_BEST_MOVE;
+                break;
+            case FIND_BEST_MOVE:
+                findBestMove();
+                state = ANIMATE_MOVE;
+                break;
+            case ANIMATE_MOVE:
+                if (!animateFall(false))
+                {
+                    state = TEST_GAME_OVER;
+                }
+                break;
+            case ANIMATE_GAME_OVER:
+                static auto curPixel = grid.pixels.size();
+                grid.pixels[curPixel] = 254;
+
+                if (curPixel == 0)
+                {
+                    state = INIT;
+                    curPixel = grid.pixels.size();
+                }
+                curPixel--;
+                break;
+        }
+    }
+
+    void reset()
+    {
+        grid.width = width;
+        grid.height = height + 4;
+        grid.reset();
+        bag.reset();
+    }
+};
+
+#endif /* __TETRISAIGAME_H__ */

usermods/TetrisAI_v2/tetrisbag.h

@@ -0,0 +1,111 @@
+/******************************************************************************
+  * @file           : tetrisbag.h
+  * @brief          : the tetris implementation of a random piece generator
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) muebau 2022
+  * All rights reserved.</center></h2>
+  *
+  ******************************************************************************
+*/
+
+#ifndef __TETRISBAG_H__
+#define __TETRISBAG_H__
+
+#include <stdint.h>
+#include <vector>
+#include <algorithm>
+
+#include "tetrisbag.h"
+
+class TetrisBag
+{
+private:
+public:
+    uint8_t nPieces;
+    uint8_t nBagLength;
+    uint8_t queueLength;
+    uint8_t bagIdx;
+    std::vector<uint8_t> bag;
+    std::vector<Piece> piecesQueue;
+
+    TetrisBag(uint8_t nPieces, uint8_t nBagLength, uint8_t queueLength):
+        nPieces(nPieces),
+        nBagLength(nBagLength),
+        queueLength(queueLength),
+        bag(nPieces * nBagLength),
+        piecesQueue(queueLength)
+    {
+        init();
+    }
+
+    void init()
+    {
+        //will shuffle the bag at first use
+        bagIdx = nPieces - 1;
+
+        for (uint8_t bagIndex = 0; bagIndex < nPieces * nBagLength; bagIndex++)
+        {
+            bag[bagIndex] = bagIndex % nPieces;
+        }
+
+        //will init the queue
+        for (uint8_t index = 0; index < piecesQueue.size(); index++)
+        {
+            queuePiece();
+        }
+    }
+
+    void shuffleBag()
+    {
+        uint8_t temp;
+        uint8_t swapIdx;
+        for (int index = nPieces - 1; index > 0; index--)
+        {
+            //get candidate to swap
+            swapIdx = rand() % index;
+
+            //swap it!
+            temp = bag[swapIdx];
+            bag[swapIdx] = bag[index];
+            bag[index] = temp;
+        }
+    }
+
+    Piece getNextPiece()
+    {
+        bagIdx++;
+        if (bagIdx >= nPieces)
+        {
+            shuffleBag();
+            bagIdx = 0;
+        }
+        return Piece(bag[bagIdx]);
+    }
+
+    void queuePiece()
+    {
+        //move vector to left
+        std::rotate(piecesQueue.begin(), piecesQueue.begin() + 1, piecesQueue.end());
+        piecesQueue[piecesQueue.size() - 1] = getNextPiece();
+    }
+
+    void queuePiece(uint8_t idx)
+    {
+        //move vector to left
+        std::rotate(piecesQueue.begin(), piecesQueue.begin() + 1, piecesQueue.end());
+        piecesQueue[piecesQueue.size() - 1] = Piece(idx % nPieces);
+    }
+
+    void reset()
+    {
+        bag.clear();
+        bag.resize(nPieces * nBagLength);
+        piecesQueue.clear();
+        piecesQueue.resize(queueLength);
+        init();
+    }
+};
+
+#endif /* __TETRISBAG_H__ */

usermods/TetrisAI_v2/usermod_v2_tetrisai.h

@@ -0,0 +1,252 @@
+#pragma once
+
+#include "wled.h"
+#include "FX.h"
+#include "fcn_declare.h"
+
+#include "tetrisaigame.h"
+// By: muebau
+
+typedef struct TetrisAI_data
+{
+  unsigned long lastTime = 0;
+  TetrisAIGame tetris;
+  uint8_t   intelligence;
+  uint8_t   rotate;
+  bool      showNext;
+  bool      showBorder;
+  uint8_t   colorOffset;
+  uint8_t   colorInc;
+  uint8_t   mistaceCountdown;
+  uint16_t segcols;
+  uint16_t segrows;
+  uint16_t segOffsetX;
+  uint16_t segOffsetY;
+  uint16_t effectWidth;
+  uint16_t effectHeight;
+} tetrisai_data;
+
+void drawGrid(TetrisAIGame* tetris, TetrisAI_data* tetrisai_data)
+{
+  SEGMENT.fill(SEGCOLOR(1));
+
+  //GRID
+  for (auto index_y = 4; index_y < tetris->grid.height; index_y++)
+  {
+    for (auto index_x = 0; index_x < tetris->grid.width; index_x++)
+    {
+      CRGB color;
+      if (*tetris->grid.getPixel(index_x, index_y) == 0)
+      {
+        //BG color
+        color = SEGCOLOR(1);
+      }
+      //game over animation
+      else if(*tetris->grid.getPixel(index_x, index_y) == 254)
+      {
+        //use fg
+        color = SEGCOLOR(0);
+      }
+      else
+      {
+        //spread the color over the whole palette
+        uint8_t colorIndex = *tetris->grid.getPixel(index_x, index_y) * 32;
+        colorIndex += tetrisai_data->colorOffset;
+        color = ColorFromPalette(SEGPALETTE, colorIndex, 255, NOBLEND);
+      }
+
+      SEGMENT.setPixelColorXY(tetrisai_data->segOffsetX + index_x, tetrisai_data->segOffsetY + index_y - 4, color);
+    }
+  }
+  tetrisai_data->colorOffset += tetrisai_data->colorInc;
+
+  //NEXT PIECE AREA
+  if (tetrisai_data->showNext)
+  {
+    //BORDER
+    if (tetrisai_data->showBorder)
+    {
+      //draw a line 6 pixels from right with the border color
+      for (auto index_y = 0; index_y < tetrisai_data->effectHeight; index_y++)
+      {
+        SEGMENT.setPixelColorXY(tetrisai_data->segOffsetX + tetrisai_data->effectWidth - 6, tetrisai_data->segOffsetY + index_y, SEGCOLOR(2));
+      }
+    }
+
+    //NEXT PIECE
+    int piecesOffsetX = tetrisai_data->effectWidth - 4;
+    int piecesOffsetY = 1;
+    for (uint8_t nextPieceIdx = 1; nextPieceIdx < tetris->nLookAhead; nextPieceIdx++)
+    {
+      uint8_t pieceNbrOffsetY = (nextPieceIdx - 1) * 5;
+
+      Piece piece(tetris->bag.piecesQueue[nextPieceIdx]);
+
+      for (uint8_t pieceY = 0; pieceY < piece.getRotation().height; pieceY++)
+      {
+        for (uint8_t pieceX = 0; pieceX < piece.getRotation().width; pieceX++)
+        {
+          if (piece.getPixel(pieceX, pieceY))
+          {
+            uint8_t colIdx = ((piece.pieceData->colorIndex * 32) + tetrisai_data->colorOffset);
+            SEGMENT.setPixelColorXY(tetrisai_data->segOffsetX + piecesOffsetX + pieceX, tetrisai_data->segOffsetY + piecesOffsetY + pieceNbrOffsetY + pieceY, ColorFromPalette(SEGPALETTE, colIdx, 255, NOBLEND));
+          }
+        }
+      }
+    }
+  }
+}
+
+////////////////////////////
+//     2D Tetris AI       //
+////////////////////////////
+uint16_t mode_2DTetrisAI()
+{
+  if (!strip.isMatrix || !SEGENV.allocateData(sizeof(tetrisai_data)))
+  {
+    // not a 2D set-up
+    SEGMENT.fill(SEGCOLOR(0));
+    return 350;
+  }
+  TetrisAI_data* tetrisai_data = reinterpret_cast<TetrisAI_data*>(SEGENV.data);
+
+  const uint16_t cols = SEGMENT.virtualWidth();
+  const uint16_t rows = SEGMENT.virtualHeight();
+
+  //range 0 - 1024ms => 1024/255 ~ 4
+  uint16_t msDelayMove = 1024 - (4 * SEGMENT.speed);
+  int16_t msDelayGameOver = msDelayMove / 4;
+
+  //range 0 - 2 (not including current)
+  uint8_t nLookAhead = SEGMENT.intensity ? (SEGMENT.intensity >> 7) + 2 : 1;
+  //range 0 - 16
+  tetrisai_data->colorInc = SEGMENT.custom2 >> 4;
+
+  if (tetrisai_data->tetris.nLookAhead != nLookAhead
+    || tetrisai_data->segcols != cols
+    || tetrisai_data->segrows != rows
+    || tetrisai_data->showNext != SEGMENT.check1
+    || tetrisai_data->showBorder != SEGMENT.check2
+  )
+  {
+    tetrisai_data->segcols = cols;
+    tetrisai_data->segrows = rows;
+    tetrisai_data->showNext = SEGMENT.check1;
+    tetrisai_data->showBorder = SEGMENT.check2;
+
+    //not more than 32 columns and 255 rows as this is the limit of this implementation
+    uint8_t gridWidth = cols > 32 ? 32 : cols;
+    uint8_t gridHeight = rows > 255 ? 255 : rows;
+
+    tetrisai_data->effectWidth = 0;
+    tetrisai_data->effectHeight = 0;
+
+    // do we need space for the 'next' section?
+    if (tetrisai_data->showNext)
+    {
+      //does it get to tight?
+      if (gridWidth + 5 > cols)
+      {
+        // yes, so make the grid smaller
+        // make space for the piece and one pixel of space
+        gridWidth = (gridWidth - ((gridWidth + 5) - cols));
+      }
+      tetrisai_data->effectWidth += 5;
+
+      // do we need space for a border?
+      if (tetrisai_data->showBorder)
+      {
+        if (gridWidth + 5 + 1 > cols)
+        {
+          gridWidth -= 1;
+        }
+        tetrisai_data->effectWidth += 1;
+      }
+    }
+
+    tetrisai_data->effectWidth += gridWidth;
+    tetrisai_data->effectHeight += gridHeight;
+
+    tetrisai_data->segOffsetX = cols > tetrisai_data->effectWidth ? ((cols - tetrisai_data->effectWidth) / 2) : 0;
+    tetrisai_data->segOffsetY = rows > tetrisai_data->effectHeight ? ((rows - tetrisai_data->effectHeight) / 2) : 0;
+
+    tetrisai_data->tetris = TetrisAIGame(gridWidth, gridHeight, nLookAhead, piecesData, numPieces);
+    tetrisai_data->tetris.state = TetrisAIGame::States::INIT;
+    SEGMENT.fill(SEGCOLOR(1));
+  }
+
+  if (tetrisai_data->intelligence != SEGMENT.custom1)
+  {
+    tetrisai_data->intelligence = SEGMENT.custom1;
+    float dui = 0.2f - (0.2f * (tetrisai_data->intelligence / 255.0f));
+
+    tetrisai_data->tetris.ai.aHeight = -0.510066f + dui;
+    tetrisai_data->tetris.ai.fullLines = 0.760666f - dui;
+    tetrisai_data->tetris.ai.holes = -0.35663f + dui;
+    tetrisai_data->tetris.ai.bumpiness = -0.184483f + dui;
+  }
+
+  if (tetrisai_data->tetris.state == TetrisAIGame::ANIMATE_MOVE)
+  {
+    
+    if (strip.now - tetrisai_data->lastTime > msDelayMove)
+    {
+      drawGrid(&tetrisai_data->tetris, tetrisai_data);
+      tetrisai_data->lastTime = strip.now;
+      tetrisai_data->tetris.poll();
+    }
+  }
+  else if (tetrisai_data->tetris.state == TetrisAIGame::ANIMATE_GAME_OVER)
+  {
+    if (strip.now - tetrisai_data->lastTime > msDelayGameOver)
+    {
+      drawGrid(&tetrisai_data->tetris, tetrisai_data);
+      tetrisai_data->lastTime = strip.now;
+      tetrisai_data->tetris.poll();
+    }
+  }
+  else if (tetrisai_data->tetris.state == TetrisAIGame::FIND_BEST_MOVE)
+  {
+    if (SEGMENT.check3)
+    {
+      if(tetrisai_data->mistaceCountdown == 0)
+      {
+        tetrisai_data->tetris.ai.findWorstMove = true;
+        tetrisai_data->tetris.poll();
+        tetrisai_data->tetris.ai.findWorstMove = false;
+        tetrisai_data->mistaceCountdown = SEGMENT.custom3;
+      }
+      tetrisai_data->mistaceCountdown--;      
+    }
+    tetrisai_data->tetris.poll();
+  }
+  else
+  {
+    tetrisai_data->tetris.poll();
+  }
+
+  return FRAMETIME;
+} // mode_2DTetrisAI()
+static const char _data_FX_MODE_2DTETRISAI[] PROGMEM = "Tetris AI@!,Look ahead,Intelligence,Rotate color,Mistake free,Show next,Border,Mistakes;Game Over,!,Border;!;2;sx=127,ix=64,c1=255,c2=0,c3=31,o1=1,o2=1,o3=0,pal=11";
+
+class TetrisAIUsermod : public Usermod
+{
+
+private:
+
+public:
+  void setup()
+  {
+    strip.addEffect(255, &mode_2DTetrisAI, _data_FX_MODE_2DTETRISAI);
+  }
+
+  void loop()
+  {
+
+  }
+
+  uint16_t getId()
+  {
+    return USERMOD_ID_TETRISAI;
+  }
+};

usermods/Wemos_D1_mini+Wemos32_mini_shield/usermod.cpp

@@ -34,30 +34,30 @@ uint8_t DALLAS_PIN =23;
 uint8_t SCL_PIN = 5;
 uint8_t SDA_PIN = 4;
 uint8_t DALLAS_PIN =13;
-// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+// uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
 #endif
 
 //The SCL and SDA pins are defined here.
 //ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
 #define U8X8_PIN_SCL SCL_PIN
 #define U8X8_PIN_SDA SDA_PIN
-//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
+//#define U8X8_PIN_RESET RST_PIN // Un-comment for Heltec WiFi-Kit-8
 
 // Dallas sensor reading timer
 long temptimer = millis();
 long lastMeasure = 0;
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 
 // If display does not work or looks corrupted check the
 // constructor reference:
 // https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
 // or check the gallery:
 // https://github.com/olikraus/u8g2/wiki/gallery
-// --> First choise of cheap I2C OLED 128X32 0.91"
+// --> First choice of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
+// --> Third choice of Heltec WiFi-Kit-8 OLED 128X32 0.91"
 //U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
 // gets called once at boot. Do all initialization that doesn't depend on network here
 void userSetup() {
@@ -97,7 +97,7 @@ void userLoop() {
 
 //----> Dallas temperature sensor MQTT publishing
   temptimer = millis();  
-// Timer to publishe new temperature every 60 seconds
+// Timer to publish new temperature every 60 seconds
   if (temptimer - lastMeasure > 60000) 
   {
     lastMeasure = temptimer;    
@@ -106,7 +106,7 @@ void userLoop() {
     if (mqtt != nullptr)
     {
 //      Serial.println(Dallas(DALLAS_PIN,0));
-//Gets prefered temperature scale based on selection in definitions section
+//Gets preferred temperature scale based on selection in definitions section
         #ifdef Celsius
         int16_t board_temperature = Dallas(DALLAS_PIN,0);
         #else
@@ -173,11 +173,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

usermods/Wemos_D1_mini+Wemos32_mini_shield/usermod_bme280.cpp

@@ -6,7 +6,7 @@
 
 void UpdateBME280Data();
 
-#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit 
+#define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 
 BME280I2C bme;    // Default : forced mode, standby time = 1000 ms
                   // Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
 
@@ -16,25 +16,25 @@ uint8_t SDA_PIN = 21;
 #else //ESP8266 boards
 uint8_t SCL_PIN = 5;
 uint8_t SDA_PIN = 4;
-// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+// uint8_t RST_PIN = 16; // Un-comment for Heltec WiFi-Kit-8
 #endif
 
 //The SCL and SDA pins are defined here.
 //ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
 #define U8X8_PIN_SCL SCL_PIN
 #define U8X8_PIN_SDA SDA_PIN
-//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
+//#define U8X8_PIN_RESET RST_PIN // Un-comment for Heltec WiFi-Kit-8
 
 // If display does not work or looks corrupted check the
 // constructor reference:
 // https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
 // or check the gallery:
 // https://github.com/olikraus/u8g2/wiki/gallery
-// --> First choise of cheap I2C OLED 128X32 0.91"
+// --> First choice of cheap I2C OLED 128X32 0.91"
 U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
+// --> Second choice of cheap I2C OLED 128X64 0.96" or 1.3"
 //U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
-// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
+// --> Third choice of Heltec WiFi-Kit-8 OLED 128X32 0.91"
 //U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
 // gets called once at boot. Do all initialization that doesn't depend on network here
 
@@ -179,11 +179,11 @@ void userLoop() {
   // First row with Wifi name
   u8x8.setCursor(1, 0);
   u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
-  // Print `~` char to indicate that SSID is longer, than owr dicplay
+  // Print `~` char to indicate that SSID is longer, than our display
   if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
-  // Second row with IP or Psssword
+  // Second row with IP or Password
   u8x8.setCursor(1, 1);
   // Print password in AP mode and if led is OFF.
   if (apActive && bri == 0)

usermods/audioreactive/audio_reactive.h

@@ -4,6 +4,10 @@
 #include <driver/i2s.h>
 #include <driver/adc.h>
 
+#ifdef WLED_ENABLE_DMX
+  #error This audio reactive usermod is not compatible with DMX Out.
+#endif
+
 #ifndef ARDUINO_ARCH_ESP32
   #error This audio reactive usermod does not support the ESP8266.
 #endif
@@ -20,6 +24,12 @@
  * ....
  */
 
+#if !defined(FFTTASK_PRIORITY)
+#define FFTTASK_PRIORITY 1 // standard: looptask prio
+//#define FFTTASK_PRIORITY 2 // above looptask, below asyc_tcp
+//#define FFTTASK_PRIORITY 4 // above asyc_tcp
+#endif
+
 // Comment/Uncomment to toggle usb serial debugging
 // #define MIC_LOGGER                   // MIC sampling & sound input debugging (serial plotter)
 // #define FFT_SAMPLING_LOG             // FFT result debugging
@@ -45,6 +55,8 @@
   #define PLOT_PRINTF(x...)
 #endif
 
+#define MAX_PALETTES 3
+
 // use audio source class (ESP32 specific)
 #include "audio_source.h"
 constexpr i2s_port_t I2S_PORT = I2S_NUM_0;       // I2S port to use (do not change !)
@@ -67,11 +79,15 @@ static uint8_t audioSyncEnabled = 0;          // bit field: bit 0 - send, bit 1
 static bool udpSyncConnected = false;         // UDP connection status -> true if connected to multicast group
 
 // user settable parameters for limitSoundDynamics()
-static bool limiterOn = true;                 // bool: enable / disable dynamics limiter
+#ifdef UM_AUDIOREACTIVE_DYNAMICS_LIMITER_OFF
+static bool limiterOn = false;                 // bool: enable / disable dynamics limiter
+#else
+static bool limiterOn = true;
+#endif
 static uint16_t attackTime =  80;             // int: attack time in milliseconds. Default 0.08sec
 static uint16_t decayTime = 1400;             // int: decay time in milliseconds.  Default 1.40sec
 // user settable options for FFTResult scaling
-static uint8_t FFTScalingMode = 3;            // 0 none; 1 optimized logarithmic; 2 optimized linear; 3 optimized sqare root
+static uint8_t FFTScalingMode = 3;            // 0 none; 1 optimized logarithmic; 2 optimized linear; 3 optimized square root
 
 // 
 // AGC presets
@@ -104,11 +120,11 @@ static float    sampleAgc = 0.0f;               // Smoothed AGC sample
 
 // peak detection
 static bool samplePeak = false;      // Boolean flag for peak - used in effects. Responding routine may reset this flag. Auto-reset after strip.getMinShowDelay()
-static uint8_t maxVol = 10;          // Reasonable value for constant volume for 'peak detector', as it won't always trigger (deprecated)
+static uint8_t maxVol = 31;          // Reasonable value for constant volume for 'peak detector', as it won't always trigger (deprecated)
 static uint8_t binNum = 8;           // Used to select the bin for FFT based beat detection  (deprecated)
-static bool udpSamplePeak = false;   // Boolean flag for peak. Set at the same tiem as samplePeak, but reset by transmitAudioData
+static bool udpSamplePeak = false;   // Boolean flag for peak. Set at the same time as samplePeak, but reset by transmitAudioData
 static unsigned long timeOfPeak = 0; // time of last sample peak detection.
-static void detectSamplePeak(void);  // peak detection function (needs scaled FFT reasults in vReal[])
+static void detectSamplePeak(void);  // peak detection function (needs scaled FFT results in vReal[])
 static void autoResetPeak(void);     // peak auto-reset function
 
 
@@ -167,26 +183,20 @@ constexpr uint16_t samplesFFT_2 = 256;          // meaningfull part of FFT resul
 // These are the input and output vectors.  Input vectors receive computed results from FFT.
 static float vReal[samplesFFT] = {0.0f};       // FFT sample inputs / freq output -  these are our raw result bins
 static float vImag[samplesFFT] = {0.0f};       // imaginary parts
-#ifdef UM_AUDIOREACTIVE_USE_NEW_FFT
-static float windowWeighingFactors[samplesFFT] = {0.0f};
-#endif
 
 // Create FFT object
-#ifdef UM_AUDIOREACTIVE_USE_NEW_FFT
 // lib_deps += https://github.com/kosme/arduinoFFT#develop @ 1.9.2
-#define FFT_SPEED_OVER_PRECISION     // enables use of reciprocals (1/x etc), and an a few other speedups
-#define FFT_SQRT_APPROXIMATION       // enables "quake3" style inverse sqrt
-#define sqrt(x) sqrtf(x)             // little hack that reduces FFT time by 50% on ESP32 (as alternative to FFT_SQRT_APPROXIMATION)
-#else
-// lib_deps += https://github.com/blazoncek/arduinoFFT.git
-#endif
+// these options actually cause slow-downs on all esp32 processors, don't use them.
+// #define FFT_SPEED_OVER_PRECISION     // enables use of reciprocals (1/x etc) - not faster on ESP32
+// #define FFT_SQRT_APPROXIMATION       // enables "quake3" style inverse sqrt  - slower on ESP32
+// Below options are forcing ArduinoFFT to use sqrtf() instead of sqrt()
+#define sqrt(x) sqrtf(x)             // little hack that reduces FFT time by 10-50% on ESP32
+#define sqrt_internal sqrtf          // see https://github.com/kosme/arduinoFFT/pull/83
+
 #include <arduinoFFT.h>
 
-#ifdef UM_AUDIOREACTIVE_USE_NEW_FFT
-static ArduinoFFT<float> FFT = ArduinoFFT<float>( vReal, vImag, samplesFFT, SAMPLE_RATE, windowWeighingFactors);
-#else
-static arduinoFFT FFT = arduinoFFT(vReal, vImag, samplesFFT, SAMPLE_RATE);
-#endif
+/* Create FFT object with weighing factor storage */
+static ArduinoFFT<float> FFT = ArduinoFFT<float>( vReal, vImag, samplesFFT, SAMPLE_RATE, true);
 
 // Helper functions
 
@@ -195,7 +205,7 @@ static float mapf(float x, float in_min, float in_max, float out_min, float out_
   return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
 }
 
-// compute average of several FFT resut bins
+// compute average of several FFT result bins
 static float fftAddAvg(int from, int to) {
   float result = 0.0f;
   for (int i = from; i <= to; i++) {
@@ -267,28 +277,14 @@ void FFTcode(void * parameter)
 #endif
 
       // run FFT (takes 3-5ms on ESP32, ~12ms on ESP32-S2)
-#ifdef UM_AUDIOREACTIVE_USE_NEW_FFT
       FFT.dcRemoval();                                            // remove DC offset
       FFT.windowing( FFTWindow::Flat_top, FFTDirection::Forward); // Weigh data using "Flat Top" function - better amplitude accuracy
       //FFT.windowing(FFTWindow::Blackman_Harris, FFTDirection::Forward);  // Weigh data using "Blackman- Harris" window - sharp peaks due to excellent sideband rejection
       FFT.compute( FFTDirection::Forward );                       // Compute FFT
       FFT.complexToMagnitude();                                   // Compute magnitudes
-#else
-      FFT.DCRemoval(); // let FFT lib remove DC component, so we don't need to care about this in getSamples()
+      vReal[0] = 0;   // The remaining DC offset on the signal produces a strong spike on position 0 that should be eliminated to avoid issues.
 
-      //FFT.Windowing( FFT_WIN_TYP_HAMMING, FFT_FORWARD );        // Weigh data - standard Hamming window
-      //FFT.Windowing( FFT_WIN_TYP_BLACKMAN, FFT_FORWARD );       // Blackman window - better side freq rejection
-      //FFT.Windowing( FFT_WIN_TYP_BLACKMAN_HARRIS, FFT_FORWARD );// Blackman-Harris - excellent sideband rejection
-      FFT.Windowing( FFT_WIN_TYP_FLT_TOP, FFT_FORWARD );          // Flat Top Window - better amplitude accuracy
-      FFT.Compute( FFT_FORWARD );                             // Compute FFT
-      FFT.ComplexToMagnitude();                               // Compute magnitudes
-#endif
-
-#ifdef UM_AUDIOREACTIVE_USE_NEW_FFT
-      FFT.majorPeak(FFT_MajorPeak, FFT_Magnitude);                // let the effects know which freq was most dominant
-#else
-      FFT.MajorPeak(&FFT_MajorPeak, &FFT_Magnitude);              // let the effects know which freq was most dominant
-#endif
+      FFT.majorPeak(&FFT_MajorPeak, &FFT_Magnitude);                // let the effects know which freq was most dominant
       FFT_MajorPeak = constrain(FFT_MajorPeak, 1.0f, 11025.0f);   // restrict value to range expected by effects
 
 #if defined(WLED_DEBUG) || defined(SR_DEBUG)
@@ -313,7 +309,7 @@ void FFTcode(void * parameter)
     *
     * Andrew's updated mapping of 256 bins down to the 16 result bins with Sample Freq = 10240, samplesFFT = 512 and some overlap.
     * Based on testing, the lowest/Start frequency is 60 Hz (with bin 3) and a highest/End frequency of 5120 Hz in bin 255.
-    * Now, Take the 60Hz and multiply by 1.320367784 to get the next frequency and so on until the end. Then detetermine the bins.
+    * Now, Take the 60Hz and multiply by 1.320367784 to get the next frequency and so on until the end. Then determine the bins.
     * End frequency = Start frequency * multiplier ^ 16
     * Multiplier = (End frequency/ Start frequency) ^ 1/16
     * Multiplier = 1.320367784
@@ -372,7 +368,7 @@ void FFTcode(void * parameter)
       }
     }
 
-    // post-processing of frequency channels (pink noise adjustment, AGC, smooting, scaling)
+    // post-processing of frequency channels (pink noise adjustment, AGC, smoothing, scaling)
     postProcessFFTResults((fabsf(sampleAvg) > 0.25f)? true : false , NUM_GEQ_CHANNELS);
 
 #if defined(WLED_DEBUG) || defined(SR_DEBUG)
@@ -411,7 +407,7 @@ static void runMicFilter(uint16_t numSamples, float *sampleBuffer)          // p
   //constexpr float beta1 = 0.8285f; // 18Khz
   constexpr float beta1 = 0.85f;  // 20Khz
 
-  constexpr float beta2 = (1.0f - beta1) / 2.0;
+  constexpr float beta2 = (1.0f - beta1) / 2.0f;
   static float last_vals[2] = { 0.0f }; // FIR high freq cutoff filter
   static float lowfilt = 0.0f;          // IIR low frequency cutoff filter
 
@@ -419,7 +415,7 @@ static void runMicFilter(uint16_t numSamples, float *sampleBuffer)          // p
         // FIR lowpass, to remove high frequency noise
         float highFilteredSample;
         if (i < (numSamples-1)) highFilteredSample = beta1*sampleBuffer[i] + beta2*last_vals[0] + beta2*sampleBuffer[i+1];  // smooth out spikes
-        else highFilteredSample = beta1*sampleBuffer[i] + beta2*last_vals[0]  + beta2*last_vals[1];                  // spcial handling for last sample in array
+        else highFilteredSample = beta1*sampleBuffer[i] + beta2*last_vals[0]  + beta2*last_vals[1];                  // special handling for last sample in array
         last_vals[1] = last_vals[0];
         last_vals[0] = sampleBuffer[i];
         sampleBuffer[i] = highFilteredSample;
@@ -464,17 +460,17 @@ static void postProcessFFTResults(bool noiseGateOpen, int numberOfChannels) // p
       switch (FFTScalingMode) {
         case 1:
             // Logarithmic scaling
-            currentResult *= 0.42;                      // 42 is the answer ;-)
-            currentResult -= 8.0;                       // this skips the lowest row, giving some room for peaks
-            if (currentResult > 1.0) currentResult = logf(currentResult); // log to base "e", which is the fastest log() function
-            else currentResult = 0.0;                   // special handling, because log(1) = 0; log(0) = undefined
+            currentResult *= 0.42f;                      // 42 is the answer ;-)
+            currentResult -= 8.0f;                       // this skips the lowest row, giving some room for peaks
+            if (currentResult > 1.0f) currentResult = logf(currentResult); // log to base "e", which is the fastest log() function
+            else currentResult = 0.0f;                   // special handling, because log(1) = 0; log(0) = undefined
             currentResult *= 0.85f + (float(i)/18.0f);  // extra up-scaling for high frequencies
             currentResult = mapf(currentResult, 0, LOG_256, 0, 255); // map [log(1) ... log(255)] to [0 ... 255]
         break;
         case 2:
             // Linear scaling
             currentResult *= 0.30f;                     // needs a bit more damping, get stay below 255
-            currentResult -= 4.0;                       // giving a bit more room for peaks
+            currentResult -= 4.0f;                       // giving a bit more room for peaks
             if (currentResult < 1.0f) currentResult = 0.0f;
             currentResult *= 0.85f + (float(i)/1.8f);   // extra up-scaling for high frequencies
         break;
@@ -482,8 +478,8 @@ static void postProcessFFTResults(bool noiseGateOpen, int numberOfChannels) // p
             // square root scaling
             currentResult *= 0.38f;
             currentResult -= 6.0f;
-            if (currentResult > 1.0) currentResult = sqrtf(currentResult);
-            else currentResult = 0.0;                   // special handling, because sqrt(0) = undefined
+            if (currentResult > 1.0f) currentResult = sqrtf(currentResult);
+            else currentResult = 0.0f;                   // special handling, because sqrt(0) = undefined
             currentResult *= 0.85f + (float(i)/4.5f);   // extra up-scaling for high frequencies
             currentResult = mapf(currentResult, 0.0, 16.0, 0.0, 255.0); // map [sqrt(1) ... sqrt(256)] to [0 ... 255]
         break;
@@ -511,11 +507,11 @@ static void postProcessFFTResults(bool noiseGateOpen, int numberOfChannels) // p
 // peak detection is called from FFT task when vReal[] contains valid FFT results
 static void detectSamplePeak(void) {
   bool havePeak = false;
-
+  // softhack007: this code continuously triggers while amplitude in the selected bin is above a certain threshold. So it does not detect peaks - it detects high activity in a frequency bin.
   // Poor man's beat detection by seeing if sample > Average + some value.
   // This goes through ALL of the 255 bins - but ignores stupid settings
   // Then we got a peak, else we don't. The peak has to time out on its own in order to support UDP sound sync.
-  if ((sampleAvg > 1) && (maxVol > 0) && (binNum > 1) && (vReal[binNum] > maxVol) && ((millis() - timeOfPeak) > 100)) {
+  if ((sampleAvg > 1) && (maxVol > 0) && (binNum > 4) && (vReal[binNum] > maxVol) && ((millis() - timeOfPeak) > 100)) {
     havePeak = true;
   }
 
@@ -601,8 +597,15 @@ class AudioReactive : public Usermod {
     };
 
     // set your config variables to their boot default value (this can also be done in readFromConfig() or a constructor if you prefer)
+    #ifdef UM_AUDIOREACTIVE_ENABLE
+    bool     enabled = true;
+    #else
     bool     enabled = false;
+    #endif
+
     bool     initDone = false;
+    bool     addPalettes = false;
+    int8_t   palettes = 0;
 
     // variables  for UDP sound sync
     WiFiUDP fftUdp;               // UDP object for sound sync (from WiFi UDP, not Async UDP!) 
@@ -616,7 +619,7 @@ class AudioReactive : public Usermod {
 
     // variables used by getSample() and agcAvg()
     int16_t  micIn = 0;           // Current sample starts with negative values and large values, which is why it's 16 bit signed
-    double   sampleMax = 0.0;     // Max sample over a few seconds. Needed for AGC controler.
+    double   sampleMax = 0.0;     // Max sample over a few seconds. Needed for AGC controller.
     double   micLev = 0.0;        // Used to convert returned value to have '0' as minimum. A leveller
     float    expAdjF = 0.0f;      // Used for exponential filter.
     float    sampleReal = 0.0f;	  // "sampleRaw" as float, to provide bits that are lost otherwise (before amplification by sampleGain or inputLevel). Needed for AGC.
@@ -638,13 +641,21 @@ class AudioReactive : public Usermod {
     // strings to reduce flash memory usage (used more than twice)
     static const char _name[];
     static const char _enabled[];
+    static const char _config[];
+    static const char _dynamics[];
+    static const char _frequency[];
     static const char _inputLvl[];
     static const char _analogmic[];
     static const char _digitalmic[];
+    static const char _addPalettes[];
     static const char UDP_SYNC_HEADER[];
     static const char UDP_SYNC_HEADER_v1[];
 
     // private methods
+    void removeAudioPalettes(void);
+    void createAudioPalettes(void);
+    CRGB getCRGBForBand(int x, int pal);
+    void fillAudioPalettes(void);
 
     ////////////////////
     // Debug support  //
@@ -734,13 +745,13 @@ class AudioReactive : public Usermod {
     * 2. we use two setpoints, one at ~60%, and one at ~80% of the maximum signal
     * 3. the amplification depends on signal level:
     *    a) normal zone - very slow adjustment
-    *    b) emergency zome (<10% or >90%) - very fast adjustment
+    *    b) emergency zone (<10% or >90%) - very fast adjustment
     */
     void agcAvg(unsigned long the_time)
     {
       const int AGC_preset = (soundAgc > 0)? (soundAgc-1): 0; // make sure the _compiler_ knows this value will not change while we are inside the function
 
-      float lastMultAgc = multAgc;      // last muliplier used
+      float lastMultAgc = multAgc;      // last multiplier used
       float multAgcTemp = multAgc;      // new multiplier
       float tmpAgc = sampleReal * multAgc;        // what-if amplified signal
 
@@ -758,7 +769,7 @@ class AudioReactive : public Usermod {
       if (time_now - last_time > 2)  {
         last_time = time_now;
 
-        if((fabsf(sampleReal) < 2.0f) || (sampleMax < 1.0f)) {
+        if((fabsf(sampleReal) < 2.0f) || (sampleMax < 1.0)) {
           // MIC signal is "squelched" - deliver silence
           tmpAgc = 0;
           // we need to "spin down" the intgrated error buffer
@@ -780,13 +791,13 @@ class AudioReactive : public Usermod {
         
         if (((multAgcTemp > 0.085f) && (multAgcTemp < 6.5f))    //integrator anti-windup by clamping
             && (multAgc*sampleMax < agcZoneStop[AGC_preset]))   //integrator ceiling (>140% of max)
-          control_integrated += control_error * 0.002 * 0.25;   // 2ms = intgration time; 0.25 for damping
+          control_integrated += control_error * 0.002 * 0.25;   // 2ms = integration time; 0.25 for damping
         else
           control_integrated *= 0.9;                            // spin down that beasty integrator
 
         // apply PI Control 
         tmpAgc = sampleReal * lastMultAgc;                      // check "zone" of the signal using previous gain
-        if ((tmpAgc > agcZoneHigh[AGC_preset]) || (tmpAgc < soundSquelch + agcZoneLow[AGC_preset])) {  // upper/lower emergy zone
+        if ((tmpAgc > agcZoneHigh[AGC_preset]) || (tmpAgc < soundSquelch + agcZoneLow[AGC_preset])) {  // upper/lower energy zone
           multAgcTemp = lastMultAgc + agcFollowFast[AGC_preset] * agcControlKp[AGC_preset] * control_error;
           multAgcTemp += agcFollowFast[AGC_preset] * agcControlKi[AGC_preset] * control_integrated;
         } else {                                                                         // "normal zone"
@@ -794,7 +805,7 @@ class AudioReactive : public Usermod {
           multAgcTemp += agcFollowSlow[AGC_preset] * agcControlKi[AGC_preset] * control_integrated;
         }
 
-        // limit amplification again - PI controler sometimes "overshoots"
+        // limit amplification again - PI controller sometimes "overshoots"
         //multAgcTemp = constrain(multAgcTemp, 0.015625f, 32.0f); // 1/64 < multAgcTemp < 32
         if (multAgcTemp > 32.0f)      multAgcTemp = 32.0f;
         if (multAgcTemp < 1.0f/64.0f) multAgcTemp = 1.0f/64.0f;
@@ -824,7 +835,7 @@ class AudioReactive : public Usermod {
     void getSample()
     {
       float    sampleAdj;           // Gain adjusted sample value
-      float    tmpSample;           // An interim sample variable used for calculatioins.
+      float    tmpSample;           // An interim sample variable used for calculations.
       const float weighting = 0.2f; // Exponential filter weighting. Will be adjustable in a future release.
       const int   AGC_preset = (soundAgc > 0)? (soundAgc-1): 0; // make sure the _compiler_ knows this value will not change while we are inside the function
 
@@ -873,8 +884,8 @@ class AudioReactive : public Usermod {
       // keep "peak" sample, but decay value if current sample is below peak
       if ((sampleMax < sampleReal) && (sampleReal > 0.5f)) {
         sampleMax = sampleMax + 0.5f * (sampleReal - sampleMax);  // new peak - with some filtering
-        // another simple way to detect samplePeak
-        if ((binNum < 10) && (millis() - timeOfPeak > 80) && (sampleAvg > 1)) {
+        // another simple way to detect samplePeak - cannot detect beats, but reacts on peak volume
+        if (((binNum < 12) || ((maxVol < 1))) && (millis() - timeOfPeak > 80) && (sampleAvg > 1)) {
           samplePeak    = true;
           timeOfPeak    = millis();
           udpSamplePeak = true;
@@ -949,6 +960,8 @@ class AudioReactive : public Usermod {
       //DEBUGSR_PRINTLN("Transmitting UDP Mic Packet");
 
       audioSyncPacket transmitData;
+      memset(reinterpret_cast<void *>(&transmitData), 0, sizeof(transmitData)); // make sure that the packet - including "invisible" padding bytes added by the compiler - is fully initialized
+
       strncpy_P(transmitData.header, PSTR(UDP_SYNC_HEADER), 6);
       // transmit samples that were not modified by limitSampleDynamics()
       transmitData.sampleRaw   = (soundAgc) ? rawSampleAgc: sampleRaw;
@@ -964,9 +977,10 @@ class AudioReactive : public Usermod {
       transmitData.FFT_Magnitude = my_magnitude;
       transmitData.FFT_MajorPeak = FFT_MajorPeak;
 
-      fftUdp.beginMulticastPacket();
-      fftUdp.write(reinterpret_cast<uint8_t *>(&transmitData), sizeof(transmitData));
-      fftUdp.endPacket();
+      if (fftUdp.beginMulticastPacket() != 0) { // beginMulticastPacket returns 0 in case of error
+        fftUdp.write(reinterpret_cast<uint8_t *>(&transmitData), sizeof(transmitData));
+        fftUdp.endPacket();
+      }
       return;
     } // transmitAudioData()
 
@@ -1071,7 +1085,7 @@ class AudioReactive : public Usermod {
      * You can use it to initialize variables, sensors or similar.
      * It is called *AFTER* readFromConfig()
      */
-    void setup()
+    void setup() override
     {
       disableSoundProcessing = true; // just to be sure
       if (!initDone) {
@@ -1108,6 +1122,11 @@ class AudioReactive : public Usermod {
       delay(100);         // Give that poor microphone some time to setup.
 
       useBandPassFilter = false;
+
+      #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+        if ((i2sckPin == I2S_PIN_NO_CHANGE) && (i2ssdPin >= 0) && (i2swsPin >= 0) && ((dmType == 1) || (dmType == 4)) ) dmType = 5;   // dummy user support: SCK == -1 --means--> PDM microphone
+      #endif
+
       switch (dmType) {
       #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S3)
         // stub cases for not-yet-supported I2S modes on other ESP32 chips
@@ -1149,6 +1168,13 @@ class AudioReactive : public Usermod {
           if (audioSource) audioSource->initialize(i2swsPin, i2ssdPin);
           break;
         #endif
+        case 6:
+          DEBUGSR_PRINTLN(F("AR: ES8388 Source"));
+          audioSource = new ES8388Source(SAMPLE_RATE, BLOCK_SIZE);
+          delay(100);
+          if (audioSource) audioSource->initialize(i2swsPin, i2ssdPin, i2sckPin, mclkPin);
+          break;
+
         #if  !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
         // ADC over I2S is only possible on "classic" ESP32
         case 0:
@@ -1156,6 +1182,7 @@ class AudioReactive : public Usermod {
           DEBUGSR_PRINTLN(F("AR: Analog Microphone (left channel only)."));
           audioSource = new I2SAdcSource(SAMPLE_RATE, BLOCK_SIZE);
           delay(100);
+          useBandPassFilter = true;  // PDM bandpass filter seems to help for bad quality analog
           if (audioSource) audioSource->initialize(audioPin);
           break;
         #endif
@@ -1177,6 +1204,7 @@ class AudioReactive : public Usermod {
       }
 
       if (enabled) connectUDPSoundSync();
+      if (enabled && addPalettes) createAudioPalettes();
       initDone = true;
     }
 
@@ -1185,7 +1213,7 @@ class AudioReactive : public Usermod {
      * connected() is called every time the WiFi is (re)connected
      * Use it to initialize network interfaces
      */
-    void connected()
+    void connected() override
     {
       if (udpSyncConnected) {   // clean-up: if open, close old UDP sync connection
         udpSyncConnected = false;
@@ -1212,7 +1240,7 @@ class AudioReactive : public Usermod {
      * 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
      *    Instead, use a timer check as shown here.
      */
-    void loop()
+    void loop() override
     {
       static unsigned long lastUMRun = millis();
 
@@ -1234,16 +1262,16 @@ class AudioReactive : public Usermod {
       {
         #ifdef WLED_DEBUG
         if ((disableSoundProcessing == false) && (audioSyncEnabled == 0)) {  // we just switched to "disabled"
-          DEBUG_PRINTLN("[AR userLoop]  realtime mode active - audio processing suspended.");
-          DEBUG_PRINTF( "               RealtimeMode = %d; RealtimeOverride = %d\n", int(realtimeMode), int(realtimeOverride));
+          DEBUG_PRINTLN(F("[AR userLoop]  realtime mode active - audio processing suspended."));
+          DEBUG_PRINTF_P(PSTR("               RealtimeMode = %d; RealtimeOverride = %d\n"), int(realtimeMode), int(realtimeOverride));
         }
         #endif
         disableSoundProcessing = true;
       } else {
         #ifdef WLED_DEBUG
         if ((disableSoundProcessing == true) && (audioSyncEnabled == 0) && audioSource->isInitialized()) {    // we just switched to "enabled"
-          DEBUG_PRINTLN("[AR userLoop]  realtime mode ended - audio processing resumed.");
-          DEBUG_PRINTF( "               RealtimeMode = %d; RealtimeOverride = %d\n", int(realtimeMode), int(realtimeOverride));
+          DEBUG_PRINTLN(F("[AR userLoop]  realtime mode ended - audio processing resumed."));
+          DEBUG_PRINTF_P(PSTR("               RealtimeMode = %d; RealtimeOverride = %d\n"), int(realtimeMode), int(realtimeOverride));
         }
         #endif
         if ((disableSoundProcessing == true) && (audioSyncEnabled == 0)) lastUMRun = millis();  // just left "realtime mode" - update timekeeping
@@ -1265,9 +1293,10 @@ class AudioReactive : public Usermod {
 
         #ifdef WLED_DEBUG
           // complain when audio userloop has been delayed for long time. Currently we need userloop running between 500 and 1500 times per second. 
-          if ((userloopDelay > 23) && !disableSoundProcessing && (audioSyncEnabled == 0)) {
-            DEBUG_PRINTF("[AR userLoop] hickup detected -> was inactive for last %d millis!\n", userloopDelay);
-          }
+          // softhack007 disabled temporarily - avoid serial console spam with MANY leds and low FPS
+          //if ((userloopDelay > 65) && !disableSoundProcessing && (audioSyncEnabled == 0)) {
+          //  DEBUG_PRINTF_P(PSTR("[AR userLoop] hiccup detected -> was inactive for last %d millis!\n"), userloopDelay);
+          //}
         #endif
 
         // run filters, and repeat in case of loop delays (hick-up compensation)
@@ -1304,6 +1333,9 @@ class AudioReactive : public Usermod {
           if (millis() - lastTime > delayMs) {
             have_new_sample = receiveAudioData();
             if (have_new_sample) last_UDPTime = millis();
+#ifdef ARDUINO_ARCH_ESP32
+            else fftUdp.flush(); // Flush udp input buffers if we haven't read it - avoids hickups in receive mode. Does not work on 8266.
+#endif
             lastTime = millis();
           }
           if (have_new_sample) syncVolumeSmth = volumeSmth;   // remember received sample
@@ -1322,7 +1354,7 @@ class AudioReactive : public Usermod {
       // Info Page: keep max sample from last 5 seconds
       if ((millis() -  sampleMaxTimer) > CYCLE_SAMPLEMAX) {
         sampleMaxTimer = millis();
-        maxSample5sec = (0.15 * maxSample5sec) + 0.85 *((soundAgc) ? sampleAgc : sampleAvg); // reset, and start with some smoothing
+        maxSample5sec = (0.15f * maxSample5sec) + 0.85f *((soundAgc) ? sampleAgc : sampleAvg); // reset, and start with some smoothing
         if (sampleAvg < 1) maxSample5sec = 0; // noise gate 
       } else {
          if ((sampleAvg >= 1)) maxSample5sec = fmaxf(maxSample5sec, (soundAgc) ? rawSampleAgc : sampleRaw); // follow maximum volume
@@ -1335,10 +1367,11 @@ class AudioReactive : public Usermod {
         lastTime = millis();
       }
 
+      fillAudioPalettes();
     }
 
 
-    bool getUMData(um_data_t **data)
+    bool getUMData(um_data_t **data) override
     {
       if (!data || !enabled) return false; // no pointer provided by caller or not enabled -> exit
       *data = um_data;
@@ -1346,7 +1379,7 @@ class AudioReactive : public Usermod {
     }
 
 
-    void onUpdateBegin(bool init)
+    void onUpdateBegin(bool init) override
     {
 #ifdef WLED_DEBUG
       fftTime = sampleTime = 0;
@@ -1366,10 +1399,11 @@ class AudioReactive : public Usermod {
       memset(fftAvg, 0, sizeof(fftAvg)); 
       memset(fftResult, 0, sizeof(fftResult)); 
       for(int i=(init?0:1); i<NUM_GEQ_CHANNELS; i+=2) fftResult[i] = 16; // make a tiny pattern
-      inputLevel = 128;                                    // resset level slider to default
+      inputLevel = 128;                                    // reset level slider to default
       autoResetPeak();
 
       if (init && FFT_Task) {
+        delay(25);                // give some time for I2S driver to finish sampling before we suspend it
         vTaskSuspend(FFT_Task);   // update is about to begin, disable task to prevent crash
         if (udpSyncConnected) {   // close UDP sync connection (if open)
           udpSyncConnected = false;
@@ -1381,15 +1415,14 @@ class AudioReactive : public Usermod {
           vTaskResume(FFT_Task);
           connected(); // resume UDP
         } else
-//          xTaskCreatePinnedToCore(
-          xTaskCreate(                        // no need to "pin" this task to core #0
+          xTaskCreateUniversal(               // xTaskCreateUniversal also works on -S2 and -C3 with single core
             FFTcode,                          // Function to implement the task
             "FFT",                            // Name of the task
-            5000,                             // Stack size in words
+            3592,                             // Stack size in words // 3592 leaves 800-1024 bytes of task stack free
             NULL,                             // Task input parameter
-            1,                                // Priority of the task
+            FFTTASK_PRIORITY,                 // Priority of the task
             &FFT_Task                         // Task handle
-//            , 0                                 // Core where the task should run
+            , 0                               // Core where the task should run
           );
       }
       micDataReal = 0.0f;                     // just to be sure
@@ -1401,7 +1434,7 @@ class AudioReactive : public Usermod {
      * handleButton() can be used to override default button behaviour. Returning true
      * will prevent button working in a default way.
      */
-    bool handleButton(uint8_t b) {
+    bool handleButton(uint8_t b) override {
       yield();
       // crude way of determining if audio input is analog
       // better would be for AudioSource to implement getType()
@@ -1424,7 +1457,7 @@ class AudioReactive : public Usermod {
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
      * Below it is shown how this could be used for e.g. a light sensor
      */
-    void addToJsonInfo(JsonObject& root)
+    void addToJsonInfo(JsonObject& root) override
     {
       char myStringBuffer[16]; // buffer for snprintf()
       JsonObject user = root["u"];
@@ -1479,14 +1512,14 @@ class AudioReactive : public Usermod {
         } else {
           // Analog or I2S digital input
           if (audioSource && (audioSource->isInitialized())) {
-            // audio source sucessfully configured
+            // audio source successfully configured
             if (audioSource->getType() == AudioSource::Type_I2SAdc) {
               infoArr.add(F("ADC analog"));
             } else {
               infoArr.add(F("I2S digital"));
             }
             // input level or "silence"
-            if (maxSample5sec > 1.0) {
+            if (maxSample5sec > 1.0f) {
               float my_usage = 100.0f * (maxSample5sec / 255.0f);
               snprintf_P(myStringBuffer, 15, PSTR(" - peak %3d%%"), int(my_usage));
               infoArr.add(myStringBuffer);
@@ -1496,7 +1529,7 @@ class AudioReactive : public Usermod {
           } else {
             // error during audio source setup
             infoArr.add(F("not initialized"));
-            infoArr.add(F(" - check GPIO config"));
+            infoArr.add(F(" - check pin settings"));
           }
         }
 
@@ -1563,7 +1596,7 @@ class AudioReactive : public Usermod {
      * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void addToJsonState(JsonObject& root)
+    void addToJsonState(JsonObject& root) override
     {
       if (!initDone) return;  // prevent crash on boot applyPreset()
       JsonObject usermod = root[FPSTR(_name)];
@@ -1578,7 +1611,7 @@ class AudioReactive : public Usermod {
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void readFromJsonState(JsonObject& root)
+    void readFromJsonState(JsonObject& root) override
     {
       if (!initDone) return;  // prevent crash on boot applyPreset()
       bool prevEnabled = enabled;
@@ -1587,13 +1620,28 @@ class AudioReactive : public Usermod {
         if (usermod[FPSTR(_enabled)].is<bool>()) {
           enabled = usermod[FPSTR(_enabled)].as<bool>();
           if (prevEnabled != enabled) onUpdateBegin(!enabled);
+          if (addPalettes) {
+            // add/remove custom/audioreactive palettes
+            if (prevEnabled && !enabled) removeAudioPalettes();
+            if (!prevEnabled && enabled) createAudioPalettes();
+          }
         }
         if (usermod[FPSTR(_inputLvl)].is<int>()) {
           inputLevel = min(255,max(0,usermod[FPSTR(_inputLvl)].as<int>()));
         }
       }
+      if (root.containsKey(F("rmcpal")) && root[F("rmcpal")].as<bool>()) {
+        // handle removal of custom palettes from JSON call so we don't break things
+        removeAudioPalettes();
+      }
     }
 
+    void onStateChange(uint8_t callMode) override {
+      if (initDone && enabled && addPalettes && palettes==0 && strip.customPalettes.size()<10) {
+        // if palettes were removed during JSON call re-add them
+        createAudioPalettes();
+      }
+    }
 
     /*
      * addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
@@ -1630,10 +1678,11 @@ class AudioReactive : public Usermod {
      * 
      * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
      */
-    void addToConfig(JsonObject& root)
+    void addToConfig(JsonObject& root) override
     {
       JsonObject top = root.createNestedObject(FPSTR(_name));
       top[FPSTR(_enabled)] = enabled;
+      top[FPSTR(_addPalettes)] = addPalettes;
 
     #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
       JsonObject amic = top.createNestedObject(FPSTR(_analogmic));
@@ -1641,29 +1690,29 @@ class AudioReactive : public Usermod {
     #endif
 
       JsonObject dmic = top.createNestedObject(FPSTR(_digitalmic));
-      dmic[F("type")] = dmType;
+      dmic["type"] = dmType;
       JsonArray pinArray = dmic.createNestedArray("pin");
       pinArray.add(i2ssdPin);
       pinArray.add(i2swsPin);
       pinArray.add(i2sckPin);
       pinArray.add(mclkPin);
 
-      JsonObject cfg = top.createNestedObject("config");
+      JsonObject cfg = top.createNestedObject(FPSTR(_config));
       cfg[F("squelch")] = soundSquelch;
       cfg[F("gain")] = sampleGain;
       cfg[F("AGC")] = soundAgc;
 
-      JsonObject dynLim = top.createNestedObject("dynamics");
+      JsonObject dynLim = top.createNestedObject(FPSTR(_dynamics));
       dynLim[F("limiter")] = limiterOn;
       dynLim[F("rise")] = attackTime;
       dynLim[F("fall")] = decayTime;
 
-      JsonObject freqScale = top.createNestedObject("frequency");
+      JsonObject freqScale = top.createNestedObject(FPSTR(_frequency));
       freqScale[F("scale")] = FFTScalingMode;
 
       JsonObject sync = top.createNestedObject("sync");
-      sync[F("port")] = audioSyncPort;
-      sync[F("mode")] = audioSyncEnabled;
+      sync["port"] = audioSyncPort;
+      sync["mode"] = audioSyncEnabled;
     }
 
 
@@ -1682,12 +1731,15 @@ class AudioReactive : public Usermod {
      * 
      * This function is guaranteed to be called on boot, but could also be called every time settings are updated
      */
-    bool readFromConfig(JsonObject& root)
+    bool readFromConfig(JsonObject& root) override
     {
       JsonObject top = root[FPSTR(_name)];
       bool configComplete = !top.isNull();
+      bool oldEnabled = enabled;
+      bool oldAddPalettes = addPalettes;
 
       configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled);
+      configComplete &= getJsonValue(top[FPSTR(_addPalettes)], addPalettes);
 
     #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
       configComplete &= getJsonValue(top[FPSTR(_analogmic)]["pin"], audioPin);
@@ -1708,24 +1760,29 @@ class AudioReactive : public Usermod {
       configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][2], i2sckPin);
       configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][3], mclkPin);
 
-      configComplete &= getJsonValue(top["config"][F("squelch")], soundSquelch);
-      configComplete &= getJsonValue(top["config"][F("gain")],    sampleGain);
-      configComplete &= getJsonValue(top["config"][F("AGC")],     soundAgc);
+      configComplete &= getJsonValue(top[FPSTR(_config)][F("squelch")], soundSquelch);
+      configComplete &= getJsonValue(top[FPSTR(_config)][F("gain")],    sampleGain);
+      configComplete &= getJsonValue(top[FPSTR(_config)][F("AGC")],     soundAgc);
 
-      configComplete &= getJsonValue(top["dynamics"][F("limiter")], limiterOn);
-      configComplete &= getJsonValue(top["dynamics"][F("rise")],  attackTime);
-      configComplete &= getJsonValue(top["dynamics"][F("fall")],  decayTime);
+      configComplete &= getJsonValue(top[FPSTR(_dynamics)][F("limiter")], limiterOn);
+      configComplete &= getJsonValue(top[FPSTR(_dynamics)][F("rise")],  attackTime);
+      configComplete &= getJsonValue(top[FPSTR(_dynamics)][F("fall")],  decayTime);
 
-      configComplete &= getJsonValue(top["frequency"][F("scale")], FFTScalingMode);
+      configComplete &= getJsonValue(top[FPSTR(_frequency)][F("scale")], FFTScalingMode);
 
-      configComplete &= getJsonValue(top["sync"][F("port")], audioSyncPort);
-      configComplete &= getJsonValue(top["sync"][F("mode")], audioSyncEnabled);
+      configComplete &= getJsonValue(top["sync"]["port"], audioSyncPort);
+      configComplete &= getJsonValue(top["sync"]["mode"], audioSyncEnabled);
 
+      if (initDone) {
+        // add/remove custom/audioreactive palettes
+        if ((oldAddPalettes && !addPalettes) || (oldAddPalettes && !enabled)) removeAudioPalettes();
+        if ((addPalettes && !oldAddPalettes && enabled) || (addPalettes && !oldEnabled && enabled)) createAudioPalettes();
+      } // else setup() will create palettes
       return configComplete;
     }
 
 
-    void appendConfigData()
+    void appendConfigData() override
     {
       oappend(SET_F("dd=addDropdown('AudioReactive','digitalmic:type');"));
     #if  !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
@@ -1738,6 +1795,8 @@ class AudioReactive : public Usermod {
     #if  !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
       oappend(SET_F("addOption(dd,'Generic I2S PDM',5);"));
     #endif
+    oappend(SET_F("addOption(dd,'ES8388',6);"));
+    
       oappend(SET_F("dd=addDropdown('AudioReactive','config:AGC');"));
       oappend(SET_F("addOption(dd,'Off',0);"));
       oappend(SET_F("addOption(dd,'Normal',1);"));
@@ -1778,7 +1837,7 @@ class AudioReactive : public Usermod {
      * Use this to blank out some LEDs or set them to a different color regardless of the set effect mode.
      * Commonly used for custom clocks (Cronixie, 7 segment)
      */
-    //void handleOverlayDraw()
+    //void handleOverlayDraw() override
     //{
       //strip.setPixelColor(0, RGBW32(0,0,0,0)) // set the first pixel to black
     //}
@@ -1788,17 +1847,109 @@ class AudioReactive : public Usermod {
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
      * This could be used in the future for the system to determine whether your usermod is installed.
      */
-    uint16_t getId()
+    uint16_t getId() override
     {
       return USERMOD_ID_AUDIOREACTIVE;
     }
 };
 
+void AudioReactive::removeAudioPalettes(void) {
+  DEBUG_PRINTLN(F("Removing audio palettes."));
+  while (palettes>0) {
+    strip.customPalettes.pop_back();
+    DEBUG_PRINTLN(palettes);
+    palettes--;
+  }
+  DEBUG_PRINT(F("Total # of palettes: ")); DEBUG_PRINTLN(strip.customPalettes.size());
+}
+
+void AudioReactive::createAudioPalettes(void) {
+  DEBUG_PRINT(F("Total # of palettes: ")); DEBUG_PRINTLN(strip.customPalettes.size());
+  if (palettes) return;
+  DEBUG_PRINTLN(F("Adding audio palettes."));
+  for (int i=0; i<MAX_PALETTES; i++)
+    if (strip.customPalettes.size() < 10) {
+      strip.customPalettes.push_back(CRGBPalette16(CRGB(BLACK)));
+      palettes++;
+      DEBUG_PRINTLN(palettes);
+    } else break;
+}
+
+// credit @netmindz ar palette, adapted for usermod @blazoncek
+CRGB AudioReactive::getCRGBForBand(int x, int pal) {
+  CRGB value;
+  CHSV hsv;
+  int b;
+  switch (pal) {
+    case 2:
+      b = map(x, 0, 255, 0, NUM_GEQ_CHANNELS/2); // convert palette position to lower half of freq band
+      hsv = CHSV(fftResult[b], 255, x);
+      hsv2rgb_rainbow(hsv, value);  // convert to R,G,B
+      break;
+    case 1:
+      b = map(x, 1, 255, 0, 10); // convert palette position to lower half of freq band
+      hsv = CHSV(fftResult[b], 255, map(fftResult[b], 0, 255, 30, 255));  // pick hue
+      hsv2rgb_rainbow(hsv, value);  // convert to R,G,B
+      break;
+    default:
+      if (x == 1) {
+        value = CRGB(fftResult[10]/2, fftResult[4]/2, fftResult[0]/2);
+      } else if(x == 255) {
+        value = CRGB(fftResult[10]/2, fftResult[0]/2, fftResult[4]/2);
+      } else {
+        value = CRGB(fftResult[0]/2, fftResult[4]/2, fftResult[10]/2);
+      }
+      break;
+  }
+  return value;
+}
+
+void AudioReactive::fillAudioPalettes() {
+  if (!palettes) return;
+  size_t lastCustPalette = strip.customPalettes.size();
+  if (lastCustPalette >= palettes) lastCustPalette -= palettes;
+  for (size_t pal=0; pal<palettes; pal++) {
+    uint8_t tcp[16];  // Needs to be 4 times however many colors are being used.
+                      // 3 colors = 12, 4 colors = 16, etc.
+
+    tcp[0] = 0;  // anchor of first color - must be zero
+    tcp[1] = 0;
+    tcp[2] = 0;
+    tcp[3] = 0;
+    
+    CRGB rgb = getCRGBForBand(1, pal);
+    tcp[4] = 1;  // anchor of first color
+    tcp[5] = rgb.r;
+    tcp[6] = rgb.g;
+    tcp[7] = rgb.b;
+    
+    rgb = getCRGBForBand(128, pal);
+    tcp[8] = 128;
+    tcp[9] = rgb.r;
+    tcp[10] = rgb.g;
+    tcp[11] = rgb.b;
+    
+    rgb = getCRGBForBand(255, pal);
+    tcp[12] = 255;  // anchor of last color - must be 255
+    tcp[13] = rgb.r;
+    tcp[14] = rgb.g;
+    tcp[15] = rgb.b;
+
+    strip.customPalettes[lastCustPalette+pal].loadDynamicGradientPalette(tcp);
+  }
+}
+
 // strings to reduce flash memory usage (used more than twice)
 const char AudioReactive::_name[]       PROGMEM = "AudioReactive";
 const char AudioReactive::_enabled[]    PROGMEM = "enabled";
+const char AudioReactive::_config[]     PROGMEM = "config";
+const char AudioReactive::_dynamics[]   PROGMEM = "dynamics";
+const char AudioReactive::_frequency[]  PROGMEM = "frequency";
 const char AudioReactive::_inputLvl[]   PROGMEM = "inputLevel";
+#if defined(ARDUINO_ARCH_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
 const char AudioReactive::_analogmic[]  PROGMEM = "analogmic";
+#endif
 const char AudioReactive::_digitalmic[] PROGMEM = "digitalmic";
+const char AudioReactive::_addPalettes[]       PROGMEM = "add-palettes";
 const char AudioReactive::UDP_SYNC_HEADER[]    PROGMEM = "00002"; // new sync header version, as format no longer compatible with previous structure
 const char AudioReactive::UDP_SYNC_HEADER_v1[] PROGMEM = "00001"; // old sync header version - need to add backwards-compatibility feature

usermods/audioreactive/audio_source.h

@@ -1,5 +1,5 @@
 #pragma once
-
+#ifdef ARDUINO_ARCH_ESP32
 #include "wled.h"
 #include <driver/i2s.h>
 #include <driver/adc.h>
@@ -22,14 +22,14 @@
 
 // see https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/chip-series-comparison.html#related-documents
 // and https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/peripherals/i2s.html#overview-of-all-modes
-#if defined(CONFIG_IDF_TARGET_ESP32C2) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C5) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2) || defined(ESP8266) || defined(ESP8265)
+#if defined(CONFIG_IDF_TARGET_ESP32C2) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C5) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2) || defined(ESP8266) || defined(ESP8265)
   // there are two things in these MCUs that could lead to problems with audio processing:
   // * no floating point hardware (FPU) support - FFT uses float calculations. If done in software, a strong slow-down can be expected (between 8x and 20x)
   // * single core, so FFT task might slow down other things like LED updates
   #if !defined(SOC_I2S_NUM) || (SOC_I2S_NUM < 1)
-  #error This audio reactive usermod does not support ESP32-C2, ESP32-C3 or ESP32-S2.
+  #error This audio reactive usermod does not support ESP32-C2 or ESP32-C3.
   #else
-  #warning This audio reactive usermod does not support ESP32-C2, ESP32-C3 or ESP32-S2.
+  #warning This audio reactive usermod does not support ESP32-C2 and ESP32-C3.
   #endif
 #endif
 
@@ -44,7 +44,7 @@
 // benefit: analog mic inputs will be sampled contiously -> better response times and less "glitches"
 // WARNING: this option WILL lock-up your device in case that any other analogRead() operation is performed; 
 //          for example if you want to read "analog buttons"
-//#define I2S_GRAB_ADC1_COMPLETELY // (experimental) continously sample analog ADC microphone. WARNING will cause analogRead() lock-up
+//#define I2S_GRAB_ADC1_COMPLETELY // (experimental) continuously sample analog ADC microphone. WARNING will cause analogRead() lock-up
 
 // data type requested from the I2S driver - currently we always use 32bit
 //#define I2S_USE_16BIT_SAMPLES   // (experimental) define this to request 16bit - more efficient but possibly less compatible
@@ -71,7 +71,7 @@
  * if you want to receive two channels, one is the actual data from microphone and another channel is suppose to receive 0, it's different data in two channels, you need to choose I2S_CHANNEL_FMT_RIGHT_LEFT in this case.
 */
 
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)) && (ESP_IDF_VERSION <= ESP_IDF_VERSION_VAL(4, 4, 3))
+#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)) && (ESP_IDF_VERSION <= ESP_IDF_VERSION_VAL(4, 4, 6))
 // espressif bug: only_left has no sound, left and right are swapped 
 // https://github.com/espressif/esp-idf/issues/9635  I2S mic not working since 4.4 (IDFGH-8138)
 // https://github.com/espressif/esp-idf/issues/8538  I2S channel selection issue? (IDFGH-6918)
@@ -122,7 +122,7 @@ class AudioSource {
        This function needs to take care of anything that needs to be done
        before samples can be obtained from the microphone.
     */
-    virtual void initialize(int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) = 0;
+    virtual void initialize(int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) = 0;
 
     /* Deinitialize
        Release all resources and deactivate any functionality that is used
@@ -191,7 +191,8 @@ class I2SSource : public AudioSource {
       };
     }
 
-    virtual void initialize(int8_t i2swsPin = I2S_PIN_NO_CHANGE, int8_t i2ssdPin = I2S_PIN_NO_CHANGE, int8_t i2sckPin = I2S_PIN_NO_CHANGE, int8_t mclkPin = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) {
+    virtual void initialize(int8_t i2swsPin = I2S_PIN_NO_CHANGE, int8_t i2ssdPin = I2S_PIN_NO_CHANGE, int8_t i2sckPin = I2S_PIN_NO_CHANGE, int8_t mclkPin = I2S_PIN_NO_CHANGE) {
+      DEBUGSR_PRINTLN(F("I2SSource:: initialize()."));
       if (i2swsPin != I2S_PIN_NO_CHANGE && i2ssdPin != I2S_PIN_NO_CHANGE) {
         if (!pinManager.allocatePin(i2swsPin, true, PinOwner::UM_Audioreactive) ||
             !pinManager.allocatePin(i2ssdPin, false, PinOwner::UM_Audioreactive)) { // #206
@@ -377,7 +378,7 @@ class I2SSource : public AudioSource {
 };
 
 /* ES7243 Microphone
-   This is an I2S microphone that requires ininitialization over
+   This is an I2S microphone that requires initialization over
    I2C before I2S data can be received
 */
 class ES7243 : public I2SSource {
@@ -412,6 +413,7 @@ public:
     };
 
     void initialize(int8_t i2swsPin, int8_t i2ssdPin, int8_t i2sckPin, int8_t mclkPin) {
+      DEBUGSR_PRINTLN(F("ES7243:: initialize();"));
       if ((i2sckPin < 0) || (mclkPin < 0)) {
         DEBUGSR_PRINTF("\nAR: invalid I2S pin: SCK=%d, MCLK=%d\n", i2sckPin, mclkPin); 
         return;
@@ -427,6 +429,122 @@ public:
     }
 };
 
+/* ES8388 Sound Module
+   This is an I2S sound processing unit that requires initialization over
+   I2C before I2S data can be received. 
+*/
+class ES8388Source : public I2SSource {
+  private:
+
+    void _es8388I2cWrite(uint8_t reg, uint8_t val) {
+#ifndef ES8388_ADDR
+      Wire.beginTransmission(0x10);
+      #define ES8388_ADDR 0x10   // default address
+#else
+      Wire.beginTransmission(ES8388_ADDR);
+#endif
+      Wire.write((uint8_t)reg);
+      Wire.write((uint8_t)val);
+      uint8_t i2cErr = Wire.endTransmission();  // i2cErr == 0 means OK
+      if (i2cErr != 0) {
+        DEBUGSR_PRINTF("AR: ES8388 I2C write failed with error=%d  (addr=0x%X, reg 0x%X, val 0x%X).\n", i2cErr, ES8388_ADDR, reg, val);
+      }
+    }
+
+    void _es8388InitAdc() {
+      // https://dl.radxa.com/rock2/docs/hw/ds/ES8388%20user%20Guide.pdf Section 10.1
+      // http://www.everest-semi.com/pdf/ES8388%20DS.pdf Better spec sheet, more clear. 
+      // https://docs.google.com/spreadsheets/d/1CN3MvhkcPVESuxKyx1xRYqfUit5hOdsG45St9BCUm-g/edit#gid=0 generally
+      // Sets ADC to around what AudioReactive expects, and loops line-in to line-out/headphone for monitoring.
+      // Registries are decimal, settings are binary as that's how everything is listed in the docs
+      // ...which makes it easier to reference the docs.
+      //
+      _es8388I2cWrite( 8,0b00000000); // I2S to slave
+      _es8388I2cWrite( 2,0b11110011); // Power down DEM and STM
+      _es8388I2cWrite(43,0b10000000); // Set same LRCK
+      _es8388I2cWrite( 0,0b00000101); // Set chip to Play & Record Mode
+      _es8388I2cWrite(13,0b00000010); // Set MCLK/LRCK ratio to 256
+      _es8388I2cWrite( 1,0b01000000); // Power up analog and lbias
+      _es8388I2cWrite( 3,0b00000000); // Power up ADC, Analog Input, and Mic Bias
+      _es8388I2cWrite( 4,0b11111100); // Power down DAC, Turn on LOUT1 and ROUT1 and LOUT2 and ROUT2 power
+      _es8388I2cWrite( 2,0b01000000); // Power up DEM and STM and undocumented bit for "turn on line-out amp"
+
+      // #define use_es8388_mic
+
+    #ifdef use_es8388_mic
+      // The mics *and* line-in are BOTH connected to LIN2/RIN2 on the AudioKit
+      // so there's no way to completely eliminate the mics. It's also hella noisy. 
+      // Line-in works OK on the AudioKit, generally speaking, as the mics really need
+      // amplification to be noticeable in a quiet room. If you're in a very loud room, 
+      // the mics on the AudioKit WILL pick up sound even in line-in mode. 
+      // TL;DR: Don't use the AudioKit for anything, use the LyraT. 
+      //
+      // The LyraT does a reasonable job with mic input as configured below.
+
+      // Pick one of these. If you have to use the mics, use a LyraT over an AudioKit if you can:
+      _es8388I2cWrite(10,0b00000000); // Use Lin1/Rin1 for ADC input (mic on LyraT)
+      //_es8388I2cWrite(10,0b01010000); // Use Lin2/Rin2 for ADC input (mic *and* line-in on AudioKit)
+      
+      _es8388I2cWrite( 9,0b10001000); // Select Analog Input PGA Gain for ADC to +24dB (L+R)
+      _es8388I2cWrite(16,0b00000000); // Set ADC digital volume attenuation to 0dB (left)
+      _es8388I2cWrite(17,0b00000000); // Set ADC digital volume attenuation to 0dB (right)
+      _es8388I2cWrite(38,0b00011011); // Mixer - route LIN1/RIN1 to output after mic gain
+
+      _es8388I2cWrite(39,0b01000000); // Mixer - route LIN to mixL, +6dB gain
+      _es8388I2cWrite(42,0b01000000); // Mixer - route RIN to mixR, +6dB gain
+      _es8388I2cWrite(46,0b00100001); // LOUT1VOL - 0b00100001 = +4.5dB
+      _es8388I2cWrite(47,0b00100001); // ROUT1VOL - 0b00100001 = +4.5dB
+      _es8388I2cWrite(48,0b00100001); // LOUT2VOL - 0b00100001 = +4.5dB
+      _es8388I2cWrite(49,0b00100001); // ROUT2VOL - 0b00100001 = +4.5dB
+
+      // Music ALC - the mics like Auto Level Control
+      // You can also use this for line-in, but it's not really needed.
+      //
+      _es8388I2cWrite(18,0b11111000); // ALC: stereo, max gain +35.5dB, min gain -12dB 
+      _es8388I2cWrite(19,0b00110000); // ALC: target -1.5dB, 0ms hold time
+      _es8388I2cWrite(20,0b10100110); // ALC: gain ramp up = 420ms/93ms, gain ramp down = check manual for calc
+      _es8388I2cWrite(21,0b00000110); // ALC: use "ALC" mode, no zero-cross, window 96 samples
+      _es8388I2cWrite(22,0b01011001); // ALC: noise gate threshold, PGA gain constant, noise gate enabled 
+    #else
+      _es8388I2cWrite(10,0b01010000); // Use Lin2/Rin2 for ADC input ("line-in")
+      _es8388I2cWrite( 9,0b00000000); // Select Analog Input PGA Gain for ADC to 0dB (L+R)
+      _es8388I2cWrite(16,0b01000000); // Set ADC digital volume attenuation to -32dB (left)
+      _es8388I2cWrite(17,0b01000000); // Set ADC digital volume attenuation to -32dB (right)
+      _es8388I2cWrite(38,0b00001001); // Mixer - route LIN2/RIN2 to output
+
+      _es8388I2cWrite(39,0b01010000); // Mixer - route LIN to mixL, 0dB gain
+      _es8388I2cWrite(42,0b01010000); // Mixer - route RIN to mixR, 0dB gain
+      _es8388I2cWrite(46,0b00011011); // LOUT1VOL - 0b00011110 = +0dB, 0b00011011 = LyraT balance fix
+      _es8388I2cWrite(47,0b00011110); // ROUT1VOL - 0b00011110 = +0dB
+      _es8388I2cWrite(48,0b00011110); // LOUT2VOL - 0b00011110 = +0dB
+      _es8388I2cWrite(49,0b00011110); // ROUT2VOL - 0b00011110 = +0dB
+    #endif
+
+    }
+
+  public:
+    ES8388Source(SRate_t sampleRate, int blockSize, float sampleScale = 1.0f, bool i2sMaster=true) :
+      I2SSource(sampleRate, blockSize, sampleScale) {
+      _config.channel_format = I2S_CHANNEL_FMT_ONLY_LEFT;
+    };
+
+    void initialize(int8_t i2swsPin, int8_t i2ssdPin, int8_t i2sckPin, int8_t mclkPin) {
+      DEBUGSR_PRINTLN(F("ES8388Source:: initialize();"));
+      if ((i2sckPin < 0) || (mclkPin < 0)) {
+        DEBUGSR_PRINTF("\nAR: invalid I2S pin: SCK=%d, MCLK=%d\n", i2sckPin, mclkPin); 
+        return;
+      }
+
+      // First route mclk, then configure ADC over I2C, then configure I2S
+      _es8388InitAdc();
+      I2SSource::initialize(i2swsPin, i2ssdPin, i2sckPin, mclkPin);
+    }
+
+    void deinitialize() {
+      I2SSource::deinitialize();
+    }
+
+};
 
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 2, 0)
 #if !defined(SOC_I2S_SUPPORTS_ADC) && !defined(SOC_I2S_SUPPORTS_ADC_DAC)
@@ -468,7 +586,8 @@ class I2SAdcSource : public I2SSource {
     /* identify Audiosource type - I2S-ADC*/
     AudioSourceType getType(void) {return(Type_I2SAdc);}
 
-    void initialize(int8_t audioPin, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) {
+    void initialize(int8_t audioPin, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) {
+      DEBUGSR_PRINTLN(F("I2SAdcSource:: initialize()."));
       _myADCchannel = 0x0F;
       if(!pinManager.allocatePin(audioPin, false, PinOwner::UM_Audioreactive)) {
          DEBUGSR_PRINTF("failed to allocate GPIO for audio analog input: %d\n", audioPin);
@@ -639,7 +758,8 @@ class SPH0654 : public I2SSource {
       I2SSource(sampleRate, blockSize, sampleScale)
     {}
 
-    void initialize(uint8_t i2swsPin, uint8_t i2ssdPin, uint8_t i2sckPin, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE, int8_t = I2S_PIN_NO_CHANGE) {
+    void initialize(int8_t i2swsPin, int8_t i2ssdPin, int8_t i2sckPin, int8_t = I2S_PIN_NO_CHANGE) {
+      DEBUGSR_PRINTLN(F("SPH0654:: initialize();"));
       I2SSource::initialize(i2swsPin, i2ssdPin, i2sckPin);
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
 // these registers are only existing in "classic" ESP32
@@ -650,3 +770,4 @@ class SPH0654 : public I2SSource {
 #endif
     }
 };
+#endif

usermods/audioreactive/readme.md

@@ -1,6 +1,6 @@
 # Audioreactive usermod
 
-Enabless controlling LEDs via audio input. Audio source can be a microphone or analog-in (AUX) using an appropriate adapter.
+Enables controlling LEDs via audio input. Audio source can be a microphone or analog-in (AUX) using an appropriate adapter.
 Supported microphones range from analog (MAX4466, MAX9814, ...) to digital (INMP441, ICS-43434, ...).
 
 Does audio processing and provides data structure that specially written effects can use.
@@ -19,7 +19,7 @@ This usermod is an evolution of [SR-WLED](https://github.com/atuline/WLED), and
 ## Supported MCUs
 This audioreactive usermod works best on "classic ESP32" (dual core), and on ESP32-S3 which also has dual core and hardware floating point support. 
 
-It will compile succesfully for ESP32-S2 and ESP32-C3, however might not work well, as other WLED functions will become slow. Audio processing requires a lot of computing power, which can be problematic on smaller MCUs like -S2 and -C3. 
+It will compile successfully for ESP32-S2 and ESP32-C3, however might not work well, as other WLED functions will become slow. Audio processing requires a lot of computing power, which can be problematic on smaller MCUs like -S2 and -C3. 
 
 Analog audio is only possible on "classic" ESP32, but not on other MCUs like ESP32-S3.
 
@@ -27,18 +27,11 @@ Currently ESP8266 is not supported, due to low speed and small RAM of this chip.
 There are however plans to create a lightweight audioreactive for the 8266, with reduced features.
 ## Installation 
 
-### using customised _arduinoFFT_ library for use with this usermod
-Add `-D USERMOD_AUDIOREACTIVE` to your PlatformIO environment `build_flags`, as well as `https://github.com/blazoncek/arduinoFFT.git` to your `lib_deps`.
-If you are not using PlatformIO (which you should) try adding `#define USERMOD_AUDIOREACTIVE` to *my_config.h* and make sure you have _arduinoFFT_ library downloaded and installed.
+### using latest _arduinoFFT_ library version 2.x
+The latest arduinoFFT release version should be used for audioreactive.
 
-Customised _arduinoFFT_ library for use with this usermod can be found at https://github.com/blazoncek/arduinoFFT.git
-
-### using latest (develop) _arduinoFFT_ library
-Alternatively, you can use the latest arduinoFFT development version.
-ArduinoFFT `develop` library is slightly more accurate, and slighly faster than our customised library, however also needs additional 2kB RAM.
-
-* `build_flags` = `-D USERMOD_AUDIOREACTIVE` `-D UM_AUDIOREACTIVE_USE_NEW_FFT`
-* `lib_deps`= `https://github.com/kosme/arduinoFFT#develop @ 1.9.2`
+* `build_flags` = `-D USERMOD_AUDIOREACTIVE`
+* `lib_deps`= `kosme/arduinoFFT @ 2.0.1`
 
 ## Configuration
 
@@ -55,6 +48,11 @@ If you want to define default GPIOs during compile time, use the following (defa
 - `-D ES7243_SDAPIN` : GPIO for I2C SDA pin on ES7243 microphone (-1)
 - `-D ES7243_SCLPIN` : GPIO for I2C SCL pin on ES7243 microphone (-1)
 
+Other options:
+
+- `-D UM_AUDIOREACTIVE_ENABLE` : makes usermod default enabled (not the same as include into build option!)
+- `-D UM_AUDIOREACTIVE_DYNAMICS_LIMITER_OFF` : disables rise/fall limiter default
+
 **NOTE** I2S is used for analog audio sampling. Hence, the analog *buttons* (i.e. potentiometers) are disabled when running this usermod with an analog microphone.
 
 ### Advanced Compile-Time Options
@@ -63,7 +61,7 @@ You can use the following additional flags in your `build_flags`
 * `-D SR_GAIN=x`     : Default "gain" setting (60)
 * `-D I2S_USE_RIGHT_CHANNEL`: Use RIGHT instead of LEFT channel (not recommended unless you strictly need this).
 * `-D I2S_USE_16BIT_SAMPLES`: Use 16bit instead of 32bit for internal sample buffers. Reduces sampling quality, but frees some RAM ressources (not recommended unless you absolutely need this).
-* `-D I2S_GRAB_ADC1_COMPLETELY`: Experimental: continously sample analog ADC microphone. Only effective on ESP32. WARNING this _will_ cause conflicts(lock-up) with any analogRead() call.
+* `-D I2S_GRAB_ADC1_COMPLETELY`: Experimental: continuously sample analog ADC microphone. Only effective on ESP32. WARNING this _will_ cause conflicts(lock-up) with any analogRead() call.
 * `-D MIC_LOGGER`     : (debugging) Logs samples from the microphone to serial USB. Use with serial plotter (Arduino IDE)
 * `-D SR_DEBUG`       : (debugging) Additional error diagnostics and debug info on serial USB.
 

usermods/boblight/boblight.h

@@ -174,9 +174,9 @@ class BobLightUsermod : public Usermod {
 
       #if WLED_DEBUG
       DEBUG_PRINTLN(F("Fill light data: "));
-      DEBUG_PRINTF(" lights %d\n", numLights);
+      DEBUG_PRINTF_P(PSTR(" lights %d\n"), numLights);
       for (int i=0; i<numLights; i++) {
-        DEBUG_PRINTF(" light %s scan %2.1f %2.1f %2.1f %2.1f\n", lights[i].lightname, lights[i].vscan[0], lights[i].vscan[1], lights[i].hscan[0], lights[i].hscan[1]);
+        DEBUG_PRINTF_P(PSTR(" light %s scan %2.1f %2.1f %2.1f %2.1f\n"), lights[i].lightname, lights[i].vscan[0], lights[i].vscan[1], lights[i].hscan[0], lights[i].hscan[1]);
       }
       #endif
     }
@@ -187,11 +187,11 @@ class BobLightUsermod : public Usermod {
 
   public:
 
-    void setup() {
+    void setup() override {
       uint16_t totalLights = bottom + left + top + right;
       if ( totalLights > strip.getLengthTotal() ) {
         DEBUG_PRINTLN(F("BobLight: Too many lights."));
-        DEBUG_PRINTF("%d+%d+%d+%d>%d\n", bottom, left, top, right, strip.getLengthTotal());
+        DEBUG_PRINTF_P(PSTR("%d+%d+%d+%d>%d\n"), bottom, left, top, right, strip.getLengthTotal());
         totalLights = strip.getLengthTotal();
         top = bottom = (uint16_t) roundf((float)totalLights * 16.0f / 50.0f);
         left = right = (uint16_t) roundf((float)totalLights *  9.0f / 50.0f);
@@ -202,14 +202,14 @@ class BobLightUsermod : public Usermod {
       initDone = true;
     }
 
-    void connected() {
+    void connected() override {
       // we can only start server when WiFi is connected
       if (!bob) bob = new WiFiServer(bobPort, 1);
       bob->begin();
       bob->setNoDelay(true);
     }
 
-    void loop() {
+    void loop() override {
       if (!enabled || strip.isUpdating()) return;
       if (millis() - lastTime > 10) {
         lastTime = millis();
@@ -225,7 +225,7 @@ class BobLightUsermod : public Usermod {
      * topic only contains stripped topic (part after /wled/MAC)
      * topic should look like: /swipe with amessage of [up|down]
      */
-    bool onMqttMessage(char* topic, char* payload) {
+    bool onMqttMessage(char* topic, char* payload) override {
       //if (strlen(topic) == 6 && strncmp_P(topic, PSTR("/subtopic"), 6) == 0) {
       //  String action = payload;
       //  if (action == "on") {
@@ -242,7 +242,7 @@ class BobLightUsermod : public Usermod {
     /**
      * subscribe to MQTT topic for controlling usermod
      */
-    void onMqttConnect(bool sessionPresent) {
+    void onMqttConnect(bool sessionPresent) override {
       //char subuf[64];
       //if (mqttDeviceTopic[0] != 0) {
       //  strcpy(subuf, mqttDeviceTopic);
@@ -252,7 +252,7 @@ class BobLightUsermod : public Usermod {
     }
 #endif
 
-    void addToJsonInfo(JsonObject& root)
+    void addToJsonInfo(JsonObject& root) override
     {
       JsonObject user = root["u"];
       if (user.isNull()) user = root.createNestedObject("u");
@@ -273,7 +273,7 @@ class BobLightUsermod : public Usermod {
      * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void addToJsonState(JsonObject& root)
+    void addToJsonState(JsonObject& root) override
     {
     }
 
@@ -281,7 +281,7 @@ class BobLightUsermod : public Usermod {
      * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
      * Values in the state object may be modified by connected clients
      */
-    void readFromJsonState(JsonObject& root) {
+    void readFromJsonState(JsonObject& root) override {
       if (!initDone) return;  // prevent crash on boot applyPreset()
       bool en = enabled;
       JsonObject um = root[FPSTR(_name)];
@@ -304,7 +304,7 @@ class BobLightUsermod : public Usermod {
       }
     }
 
-    void appendConfigData() {
+    void appendConfigData() override {
       //oappend(SET_F("dd=addDropdown('usermod','selectfield');"));
       //oappend(SET_F("addOption(dd,'1st value',0);"));
       //oappend(SET_F("addOption(dd,'2nd value',1);"));
@@ -315,10 +315,10 @@ class BobLightUsermod : public Usermod {
       oappend(SET_F("addInfo('BobLight:pct',1,'Depth of scan [%]');"));   // 0 is field type, 1 is actual field
     }
 
-    void addToConfig(JsonObject& root) {
+    void addToConfig(JsonObject& root) override {
       JsonObject umData = root.createNestedObject(FPSTR(_name));
       umData[FPSTR(_enabled)] = enabled;
-      umData[F("port")]       = bobPort;
+      umData[  "port" ]       = bobPort;
       umData[F("top")]        = top;
       umData[F("bottom")]     = bottom;
       umData[F("left")]       = left;
@@ -326,7 +326,7 @@ class BobLightUsermod : public Usermod {
       umData[F("pct")]        = pct;
     }
 
-    bool readFromConfig(JsonObject& root) {
+    bool readFromConfig(JsonObject& root) override {
       JsonObject umData = root[FPSTR(_name)];
       bool configComplete = !umData.isNull();
 
@@ -334,7 +334,7 @@ class BobLightUsermod : public Usermod {
       configComplete &= getJsonValue(umData[FPSTR(_enabled)], en);
       enable(en);
 
-      configComplete &= getJsonValue(umData[F("port")],   bobPort);
+      configComplete &= getJsonValue(umData[  "port" ],   bobPort);
       configComplete &= getJsonValue(umData[F("bottom")], bottom,    16);
       configComplete &= getJsonValue(umData[F("top")],    top,       16);
       configComplete &= getJsonValue(umData[F("left")],   left,       9);
@@ -355,11 +355,11 @@ class BobLightUsermod : public Usermod {
      * Use this to blank out some LEDs or set them to a different color regardless of the set effect mode.
      * Commonly used for custom clocks (Cronixie, 7 segment)
      */
-    void handleOverlayDraw() {
+    void handleOverlayDraw() override {
       //strip.setPixelColor(0, RGBW32(0,0,0,0)) // set the first pixel to black
     }
 
-    uint16_t getId() { return USERMOD_ID_BOBLIGHT; }
+    uint16_t getId() override { return USERMOD_ID_BOBLIGHT; }
 
 };
 
@@ -392,7 +392,7 @@ void BobLightUsermod::pollBob() {
     //get data from the client
     while (bobClient.available()) {
       String input = bobClient.readStringUntil('\n');
-      // DEBUG_PRINT("Client: "); DEBUG_PRINTLN(input); // may be to stressful on Serial
+      // DEBUG_PRINT(F("Client: ")); DEBUG_PRINTLN(input); // may be to stressful on Serial
       if (input.startsWith(F("hello"))) {
         DEBUG_PRINTLN(F("hello"));
         bobClient.print(F("hello\n"));
@@ -445,7 +445,7 @@ void BobLightUsermod::pollBob() {
           //strip.setPixelColor(light_id, RGBW32(red, green, blue, 0));
           setRealtimePixel(light_id, red, green, blue, 0);
         } // currently no support for interpolation or speed, we just ignore this
-      } else if (input.startsWith(F("sync"))) {
+      } else if (input.startsWith("sync")) {
         BobSync();
       } else {
         // Client sent gibberish

usermods/mpu6050_imu/readme.md

@@ -20,14 +20,11 @@ react to the globes orientation. See the blog post on building it <https://www.r
 
 I2Cdev and MPU6050 must be installed.
 
-To install them, add I2Cdevlib-MPU6050@fbde122cc5 to lib_deps in the platformio.ini file.
-
-You also need to change lib_compat_mode from strict to soft in platformio.ini (This ignores that I2Cdevlib-MPU6050 doesn't list platform compatibility)
+To install them, add electroniccats/MPU6050@1.0.1 to lib_deps in the platformio.ini file.
 
 For example:
 
 ```
-lib_compat_mode = soft
 lib_deps =
     FastLED@3.3.2
     NeoPixelBus@2.5.7
@@ -36,7 +33,7 @@ lib_deps =
     AsyncTCP@1.0.3
     Esp Async WebServer@1.2.0
     IRremoteESP8266@2.7.3
-    jrowberg/I2Cdevlib-MPU6050@^1.0.0
+    electroniccats/MPU6050@1.0.1
 ```
 
 ## Wiring

usermods/mpu6050_imu/usermod_gyro_surge.h

@@ -0,0 +1,219 @@
+#pragma once
+
+/* This usermod uses gyro data to provide a "surge" effect on movement
+
+Requires lib_deps = bolderflight/Bolder Flight Systems Eigen@^3.0.0
+
+*/
+
+#include "wled.h"
+
+// Eigen include block
+#ifdef A0
+namespace { constexpr size_t A0_temp {A0}; }
+#undef A0
+static constexpr size_t A0 {A0_temp};
+#endif
+
+#ifdef A1
+namespace { constexpr size_t A1_temp {A1}; }
+#undef A1
+static constexpr size_t A1 {A1_temp};
+#endif
+
+#ifdef B0
+namespace { constexpr size_t B0_temp {B0}; }
+#undef B0
+static constexpr size_t B0 {B0_temp};
+#endif
+
+#ifdef B1
+namespace { constexpr size_t B1_temp {B1}; }
+#undef B1
+static constexpr size_t B1 {B1_temp};
+#endif
+
+#ifdef D0
+namespace { constexpr size_t D0_temp {D0}; }
+#undef D0
+static constexpr size_t D0 {D0_temp};
+#endif
+
+#ifdef D1
+namespace { constexpr size_t D1_temp {D1}; }
+#undef D1
+static constexpr size_t D1 {D1_temp};
+#endif
+
+#ifdef D2
+namespace { constexpr size_t D2_temp {D2}; }
+#undef D2
+static constexpr size_t D2 {D2_temp};
+#endif
+
+#ifdef D3
+namespace { constexpr size_t D3_temp {D3}; }
+#undef D3
+static constexpr size_t D3 {D3_temp};
+#endif
+
+#include "eigen.h"
+#include <Eigen/Geometry>
+
+constexpr auto ESTIMATED_G = 9.801;  // m/s^2
+constexpr auto ESTIMATED_G_COUNTS = 8350.;
+constexpr auto ESTIMATED_ANGULAR_RATE = (M_PI * 2000) / (INT16_MAX * 180); // radians per second
+
+// Horribly lame digital filter code
+// Currently implements a static IIR filter.
+template<typename T, unsigned C>
+class xir_filter {
+    typedef Eigen::Array<T, C, 1> array_t;
+    const array_t a_coeff, b_coeff;
+    const T gain;
+    array_t x, y;
+
+    public:
+    xir_filter(T gain_, array_t a, array_t b) : a_coeff(std::move(a)), b_coeff(std::move(b)), gain(gain_), x(array_t::Zero()), y(array_t::Zero()) {};
+
+    T operator()(T input) {
+        x.head(C-1) = x.tail(C-1);  // shift by one
+        x(C-1) = input / gain;
+        y.head(C-1) = y.tail(C-1);  // shift by one
+        y(C-1) = (x * b_coeff).sum();
+        y(C-1) -= (y.head(C-1) * a_coeff.head(C-1)).sum();
+        return y(C-1);
+    }
+
+    T last() { return y(C-1); };
+};
+
+
+
+class GyroSurge : public Usermod {
+  private:
+    static const char _name[];
+    bool enabled = true;
+
+    // Params
+    uint8_t max = 0;
+    float sensitivity = 0;
+
+    // State
+    uint32_t last_sample;
+    // 100hz input
+    // butterworth low pass filter at 20hz
+    xir_filter<float, 3> filter = { 1., { -0.36952738, 0.19581571, 1.}, {0.20657208, 0.41314417, 0.20657208} };
+                                  // { 1., { 0., 0., 1.}, { 0., 0., 1. } }; // no filter
+
+
+  public:
+
+    /*
+     * setup() is called once at boot. WiFi is not yet connected at this point.
+     */
+    void setup() {};
+
+
+    /*
+     * addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
+     * It will be called by WLED when settings are actually saved (for example, LED settings are saved)
+     * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
+     */
+    void addToConfig(JsonObject& root)
+    {
+      JsonObject top = root.createNestedObject(FPSTR(_name));
+
+      //save these vars persistently whenever settings are saved
+      top["max"] = max;
+      top["sensitivity"] = sensitivity;
+    }
+
+
+    /*
+     * readFromConfig() can be used to read back the custom settings you added with addToConfig().
+     * This is called by WLED when settings are loaded (currently this only happens immediately after boot, or after saving on the Usermod Settings page)
+     * 
+     * readFromConfig() is called BEFORE setup(). This means you can use your persistent values in setup() (e.g. pin assignments, buffer sizes),
+     * but also that if you want to write persistent values to a dynamic buffer, you'd need to allocate it here instead of in setup.
+     * If you don't know what that is, don't fret. It most likely doesn't affect your use case :)
+     * 
+     * Return true in case the config values returned from Usermod Settings were complete, or false if you'd like WLED to save your defaults to disk (so any missing values are editable in Usermod Settings)
+     * 
+     * getJsonValue() returns false if the value is missing, or copies the value into the variable provided and returns true if the value is present
+     * The configComplete variable is true only if the "exampleUsermod" object and all values are present.  If any values are missing, WLED will know to call addToConfig() to save them
+     * 
+     * This function is guaranteed to be called on boot, but could also be called every time settings are updated
+     */
+    bool readFromConfig(JsonObject& root)
+    {
+      // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
+      // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
+
+      JsonObject top = root[FPSTR(_name)];
+
+      bool configComplete = !top.isNull();
+
+      configComplete &= getJsonValue(top["max"], max, 0);
+      configComplete &= getJsonValue(top["sensitivity"], sensitivity, 10);
+
+      return configComplete;
+    }
+
+    void loop() {
+      // get IMU data
+      um_data_t *um_data;
+      if (!usermods.getUMData(&um_data, USERMOD_ID_IMU)) {
+        // Apply max
+        strip.getSegment(0).fadeToBlackBy(max);
+        return;
+      }
+      uint32_t sample_count = *(uint32_t*)(um_data->u_data[8]);
+
+      if (sample_count != last_sample) {        
+        last_sample = sample_count;
+        // Calculate based on new data
+        // We use the raw gyro data (angular rate)        
+        auto gyros = (int16_t*)um_data->u_data[4];  // 16384 == 2000 deg/s
+
+        // Compute the overall rotation rate
+        // For my application (a plasma sword) we ignore X axis rotations (eg. around the long axis)
+        auto gyro_q = Eigen::AngleAxis<float> {
+                        //Eigen::AngleAxis<float>(ESTIMATED_ANGULAR_RATE * gyros[0], Eigen::Vector3f::UnitX()) *
+                        Eigen::AngleAxis<float>(ESTIMATED_ANGULAR_RATE * gyros[1], Eigen::Vector3f::UnitY()) *
+                        Eigen::AngleAxis<float>(ESTIMATED_ANGULAR_RATE * gyros[2], Eigen::Vector3f::UnitZ()) };
+        
+        // Filter the results
+        filter(std::min(sensitivity * gyro_q.angle(), 1.0f));   // radians per second
+/*
+        Serial.printf("[%lu] Gy: %d, %d, %d -- ", millis(), (int)gyros[0], (int)gyros[1], (int)gyros[2]);
+        Serial.print(gyro_q.angle());
+        Serial.print(", ");
+        Serial.print(sensitivity * gyro_q.angle());
+        Serial.print(" --> ");
+        Serial.println(filter.last());
+*/
+      }
+    }; // noop
+
+    /*
+     * handleOverlayDraw() is called just before every show() (LED strip update frame) after effects have set the colors.
+     * Use this to blank out some LEDs or set them to a different color regardless of the set effect mode.
+     * Commonly used for custom clocks (Cronixie, 7 segment)
+     */
+    void handleOverlayDraw()
+    {
+
+      // TODO: some kind of timing analysis for filtering ...
+
+      // Calculate brightness boost
+      auto r_float = std::max(std::min(filter.last(), 1.0f), 0.f);
+      auto result = (uint8_t) (r_float * max);
+      //Serial.printf("[%lu] %d -- ", millis(), result);
+      //Serial.println(r_float);
+      // TODO - multiple segment handling??
+      strip.getSegment(0).fadeToBlackBy(max - result);
+    }
+};
+
+const char GyroSurge::_name[] PROGMEM = "GyroSurge";

usermods/mpu6050_imu/usermod_mpu6050_imu.h

@@ -20,11 +20,11 @@
   XCL     not connected
   AD0     not connected
   INT     D8 (GPIO15)   Interrupt pin
-  
+
   Using usermod:
   1. Copy the usermod into the sketch folder (same folder as wled00.ino)
   2. Register the usermod by adding #include "usermod_filename.h" in the top and registerUsermod(new MyUsermodClass()) in the bottom of usermods_list.cpp
-  3. I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h file 
+  3. I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h file
      for both classes must be in the include path of your project. To install the
      libraries add I2Cdevlib-MPU6050@fbde122cc5 to lib_deps in the platformio.ini file.
   4. You also need to change lib_compat_mode from strict to soft in platformio.ini (This ignores that I2Cdevlib-MPU6050 doesn't list platform compatibility)
@@ -33,6 +33,9 @@
 
 #include "I2Cdev.h"
 
+#undef DEBUG_PRINT
+#undef DEBUG_PRINTLN
+#undef DEBUG_PRINTF
 #include "MPU6050_6Axis_MotionApps20.h"
 //#include "MPU6050.h" // not necessary if using MotionApps include file
 
@@ -42,6 +45,23 @@
     #include "Wire.h"
 #endif
 
+// Restore debug macros
+// MPU6050 unfortunately uses the same macro names as WLED :(
+#undef DEBUG_PRINT
+#undef DEBUG_PRINTLN
+#undef DEBUG_PRINTF
+#ifdef WLED_DEBUG
+  #define DEBUG_PRINT(x) DEBUGOUT.print(x)
+  #define DEBUG_PRINTLN(x) DEBUGOUT.println(x)
+  #define DEBUG_PRINTF(x...) DEBUGOUT.printf(x)
+#else
+  #define DEBUG_PRINT(x)
+  #define DEBUG_PRINTLN(x)
+  #define DEBUG_PRINTF(x...)
+#endif
+
+
+
 // ================================================================
 // ===               INTERRUPT DETECTION ROUTINE                ===
 // ================================================================
@@ -52,21 +72,31 @@ void IRAM_ATTR dmpDataReady() {
 }
 
 
+
 class MPU6050Driver : public Usermod {
   private:
     MPU6050 mpu;
-    bool enabled = true;
+
+    // configuration state
+    // default values are set in readFromConfig
+    // By making this a struct, we enable easy backup and comparison in the readFromConfig class
+    struct config_t {
+      bool enabled;
+      int8_t interruptPin;    
+      int16_t gyro_offset[3]; 
+      int16_t accel_offset[3];
+    };
+    config_t config;
 
     // MPU control/status vars
+    bool irqBound = false; // set true if we have bound the IRQ pin
     bool dmpReady = false;  // set true if DMP init was successful
-    uint8_t mpuIntStatus;   // holds actual interrupt status byte from MPU
     uint8_t devStatus;      // return status after each device operation (0 = success, !0 = error)
     uint16_t packetSize;    // expected DMP packet size (default is 42 bytes)
     uint16_t fifoCount;     // count of all bytes currently in FIFO
     uint8_t fifoBuffer[64]; // FIFO storage buffer
 
-    //NOTE: some of these can be removed to save memory, processing time
-    //      if the measurement isn't needed
+    // TODO: some of these can be removed to save memory, processing time if the measurement isn't needed
     Quaternion qat;         // [w, x, y, z]         quaternion container
     float euler[3];         // [psi, theta, phi]    Euler angle container
     float ypr[3];           // [yaw, pitch, roll]   yaw/pitch/roll container
@@ -75,17 +105,67 @@ class MPU6050Driver : public Usermod {
     VectorInt16 aaReal;     // [x, y, z]            gravity-free accel sensor measurements
     VectorInt16 aaWorld;    // [x, y, z]            world-frame accel sensor measurements
     VectorFloat gravity;    // [x, y, z]            gravity vector
+    uint32 sample_count;
 
-    static const int INTERRUPT_PIN = 15; // use pin 15 on ESP8266
+    // Usermod output
+    um_data_t um_data;
+
+    // config element names as progmem strs
+    static const char _name[];
+    static const char _enabled[];
+    static const char _interrupt_pin[];
+    static const char _x_acc_bias[];
+    static const char _y_acc_bias[];
+    static const char _z_acc_bias[];
+    static const char _x_gyro_bias[];
+    static const char _y_gyro_bias[];
+    static const char _z_gyro_bias[];
 
   public:
-    //Functions called by WLED
 
+    inline bool initDone() { return um_data.u_size != 0; };   // recycle this instead of storing an extra variable
+
+    //Functions called by WLED
     /*
      * setup() is called once at boot. WiFi is not yet connected at this point.
      */
     void setup() {
-      if (i2c_scl<0 || i2c_sda<0) { enabled = false; return; }
+      dmpReady = false;   // Start clean
+
+      // one time init
+      if (!initDone()) {
+        um_data.u_size = 9;
+        um_data.u_type = new um_types_t[um_data.u_size];
+        um_data.u_data = new void*[um_data.u_size];
+        um_data.u_data[0] = &qat;
+        um_data.u_type[0] = UMT_FLOAT_ARR;
+        um_data.u_data[1] = &euler;
+        um_data.u_type[1] = UMT_FLOAT_ARR;
+        um_data.u_data[2] = &ypr;
+        um_data.u_type[2] = UMT_FLOAT_ARR;
+        um_data.u_data[3] = &aa;
+        um_data.u_type[3] = UMT_INT16_ARR;
+        um_data.u_data[4] = &gy;
+        um_data.u_type[4] = UMT_INT16_ARR;
+        um_data.u_data[5] = &aaReal;
+        um_data.u_type[5] = UMT_INT16_ARR;
+        um_data.u_data[6] = &aaWorld;
+        um_data.u_type[6] = UMT_INT16_ARR;
+        um_data.u_data[7] = &gravity;
+        um_data.u_type[7] = UMT_FLOAT_ARR;
+        um_data.u_data[8] = &sample_count;
+        um_data.u_type[8] = UMT_UINT32;
+      }
+
+      if (!config.enabled) return;
+      if (i2c_scl<0 || i2c_sda<0) { DEBUG_PRINTLN(F("MPU6050: I2C is no good."));  return; }
+      // Check the interrupt pin
+      if (config.interruptPin >= 0) {
+        irqBound = pinManager.allocatePin(config.interruptPin, false, PinOwner::UM_IMU);
+        if (!irqBound) { DEBUG_PRINTLN(F("MPU6050: IRQ pin already in use.")); return; }
+        pinMode(config.interruptPin, INPUT);
+      };
+
       #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
         Wire.setClock(400000U); // 400kHz I2C clock. Comment this line if having compilation difficulties
       #elif I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
@@ -95,7 +175,6 @@ class MPU6050Driver : public Usermod {
       // initialize device
       DEBUG_PRINTLN(F("Initializing I2C devices..."));
       mpu.initialize();
-      pinMode(INTERRUPT_PIN, INPUT);
 
       // verify connection
       DEBUG_PRINTLN(F("Testing device connections..."));
@@ -105,11 +184,16 @@ class MPU6050Driver : public Usermod {
       DEBUG_PRINTLN(F("Initializing DMP..."));
       devStatus = mpu.dmpInitialize();
 
-      // supply your own gyro offsets here, scaled for min sensitivity
-      mpu.setXGyroOffset(220);
-      mpu.setYGyroOffset(76);
-      mpu.setZGyroOffset(-85);
-      mpu.setZAccelOffset(1788); // 1688 factory default for my test chip
+      // set offsets (from config)
+      mpu.setXGyroOffset(config.gyro_offset[0]);
+      mpu.setYGyroOffset(config.gyro_offset[1]);
+      mpu.setZGyroOffset(config.gyro_offset[2]);
+      mpu.setXAccelOffset(config.accel_offset[0]);
+      mpu.setYAccelOffset(config.accel_offset[1]);
+      mpu.setZAccelOffset(config.accel_offset[2]);
+
+      // set sample rate
+      mpu.setRate(16);  // ~100Hz
 
       // make sure it worked (returns 0 if so)
       if (devStatus == 0) {
@@ -117,17 +201,19 @@ class MPU6050Driver : public Usermod {
         DEBUG_PRINTLN(F("Enabling DMP..."));
         mpu.setDMPEnabled(true);
 
-        // enable Arduino interrupt detection
-        DEBUG_PRINTLN(F("Enabling interrupt detection (Arduino external interrupt 0)..."));
-        attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), dmpDataReady, RISING);
-        mpuIntStatus = mpu.getIntStatus();
-
-        // set our DMP Ready flag so the main loop() function knows it's okay to use it
-        DEBUG_PRINTLN(F("DMP ready! Waiting for first interrupt..."));
-        dmpReady = true;
+        mpuInterrupt = true;
+        if (irqBound) {
+          // enable Arduino interrupt detection
+          DEBUG_PRINTLN(F("Enabling interrupt detection (Arduino external interrupt 0)..."));          
+          attachInterrupt(digitalPinToInterrupt(config.interruptPin), dmpDataReady, RISING);
+        }
 
         // get expected DMP packet size for later comparison
         packetSize = mpu.dmpGetFIFOPacketSize();
+
+        // set our DMP Ready flag so the main loop() function knows it's okay to use it
+        DEBUG_PRINTLN(F("DMP ready!"));
+        dmpReady = true;
       } else {
         // ERROR!
         // 1 = initial memory load failed
@@ -137,6 +223,9 @@ class MPU6050Driver : public Usermod {
         DEBUG_PRINT(devStatus);
         DEBUG_PRINTLN(")");
       }
+
+      fifoCount = 0;
+      sample_count = 0;
     }
 
     /*
@@ -144,7 +233,7 @@ class MPU6050Driver : public Usermod {
      * Use it to initialize network interfaces
      */
     void connected() {
-      //DEBUG_PRINTLN("Connected to WiFi!");
+      //DEBUG_PRINTLN(F("Connected to WiFi!"));
     }
 
 
@@ -153,28 +242,31 @@ class MPU6050Driver : public Usermod {
      */
     void loop() {
       // if programming failed, don't try to do anything
-      if (!enabled || !dmpReady || strip.isUpdating()) return;
+      if (!config.enabled || !dmpReady || strip.isUpdating()) return;
 
       // wait for MPU interrupt or extra packet(s) available
+      // mpuInterrupt is fixed on if interrupt pin is disabled
       if (!mpuInterrupt && fifoCount < packetSize) return;
 
       // reset interrupt flag and get INT_STATUS byte
-      mpuInterrupt = false;
-      mpuIntStatus = mpu.getIntStatus();
-
-      // get current FIFO count
+      auto mpuIntStatus = mpu.getIntStatus();
+      // Update current FIFO count
       fifoCount = mpu.getFIFOCount();
 
       // check for overflow (this should never happen unless our code is too inefficient)
       if ((mpuIntStatus & 0x10) || fifoCount == 1024) {
         // reset so we can continue cleanly
         mpu.resetFIFO();
-        DEBUG_PRINTLN(F("FIFO overflow!"));
+        DEBUG_PRINTLN(F("MPU6050: FIFO overflow!"));
 
-        // otherwise, check for DMP data ready interrupt (this should happen frequently)
-      } else if (mpuIntStatus & 0x02) {
-        // wait for correct available data length, should be a VERY short wait
-        while (fifoCount < packetSize) fifoCount = mpu.getFIFOCount();
+        // otherwise, check for data ready
+      } else if (fifoCount >= packetSize) {
+        // clear local interrupt pending status, if not polling
+        mpuInterrupt = !irqBound;
+
+        // DEBUG_PRINT(F("MPU6050: Processing packet: "));
+        // DEBUG_PRINT(fifoCount);
+        // DEBUG_PRINTLN(F(" bytes in FIFO"));
 
         // read a packet from FIFO
         mpu.getFIFOBytes(fifoBuffer, packetSize);
@@ -183,7 +275,6 @@ class MPU6050Driver : public Usermod {
         // (this lets us immediately read more without waiting for an interrupt)
         fifoCount -= packetSize;
 
-
         //NOTE: some of these can be removed to save memory, processing time
         //      if the measurement isn't needed
         mpu.dmpGetQuaternion(&qat, fifoBuffer);
@@ -194,87 +285,141 @@ class MPU6050Driver : public Usermod {
         mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
         mpu.dmpGetLinearAccelInWorld(&aaWorld, &aaReal, &qat);
         mpu.dmpGetYawPitchRoll(ypr, &qat, &gravity);
+        ++sample_count;
       }
     }
 
-
-
     void addToJsonInfo(JsonObject& root)
     {
-      int reading = 20;
-      //this code adds "u":{"Light":[20," lux"]} to the info object
       JsonObject user = root["u"];
       if (user.isNull()) user = root.createNestedObject("u");
 
-      JsonObject imu_meas = user.createNestedObject("IMU");
-      JsonArray quat_json = imu_meas.createNestedArray("Quat");
+      // Unfortunately the web UI doesn't know how to print sub-objects: you just see '[object Object]'
+      // For now, we just put everything in the root userdata object.
+      //auto imu_meas = user.createNestedObject("IMU");
+      auto& imu_meas = user;
+
+      // If an element is an array, the UI expects two elements in the form [value, unit]
+      // Since our /value/ is an array, wrap it, eg. [[a, b, c]]
+      JsonArray quat_json = imu_meas.createNestedArray("Quat").createNestedArray();
       quat_json.add(qat.w);
       quat_json.add(qat.x);
       quat_json.add(qat.y);
       quat_json.add(qat.z);
-      JsonArray euler_json = imu_meas.createNestedArray("Euler");
+      JsonArray euler_json = imu_meas.createNestedArray("Euler").createNestedArray();
       euler_json.add(euler[0]);
       euler_json.add(euler[1]);
       euler_json.add(euler[2]);
-      JsonArray accel_json = imu_meas.createNestedArray("Accel");
+      JsonArray accel_json = imu_meas.createNestedArray("Accel").createNestedArray();
       accel_json.add(aa.x);
       accel_json.add(aa.y);
       accel_json.add(aa.z);
-      JsonArray gyro_json = imu_meas.createNestedArray("Gyro");
+      JsonArray gyro_json = imu_meas.createNestedArray("Gyro").createNestedArray();
       gyro_json.add(gy.x);
       gyro_json.add(gy.y);
       gyro_json.add(gy.z);
-      JsonArray world_json = imu_meas.createNestedArray("WorldAccel");
+      JsonArray world_json = imu_meas.createNestedArray("WorldAccel").createNestedArray();
       world_json.add(aaWorld.x);
       world_json.add(aaWorld.y);
       world_json.add(aaWorld.z);
-      JsonArray real_json = imu_meas.createNestedArray("RealAccel");
+      JsonArray real_json = imu_meas.createNestedArray("RealAccel").createNestedArray();
       real_json.add(aaReal.x);
       real_json.add(aaReal.y);
       real_json.add(aaReal.z);
-      JsonArray grav_json = imu_meas.createNestedArray("Gravity");
+      JsonArray grav_json = imu_meas.createNestedArray("Gravity").createNestedArray();
       grav_json.add(gravity.x);
       grav_json.add(gravity.y);
       grav_json.add(gravity.z);
-      JsonArray orient_json = imu_meas.createNestedArray("Orientation");
+      JsonArray orient_json = imu_meas.createNestedArray("Orientation").createNestedArray();
       orient_json.add(ypr[0]);
       orient_json.add(ypr[1]);
       orient_json.add(ypr[2]);
     }
 
 
-    /*
-     * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
-     * Values in the state object may be modified by connected clients
-     */
-    //void addToJsonState(JsonObject& root)
-    //{
-      //root["user0"] = userVar0;
-    //}
-
-
-    /*
-     * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
-     * Values in the state object may be modified by connected clients
-     */
-    //void readFromJsonState(JsonObject& root)
-    //{
-      //if (root["bri"] == 255) DEBUG_PRINTLN(F("Don't burn down your garage!"));
-    //}
-
-
     /*
      * addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
      * It will be called by WLED when settings are actually saved (for example, LED settings are saved)
      * I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
      */
-//    void addToConfig(JsonObject& root)
-//    {
-//      JsonObject top = root.createNestedObject("MPU6050_IMU");
-//      JsonArray pins = top.createNestedArray("pin");
-//      pins.add(HW_PIN_SCL);
-//      pins.add(HW_PIN_SDA);
-//    }
+    void addToConfig(JsonObject& root)
+    {
+      JsonObject top = root.createNestedObject(FPSTR(_name));
+
+      //save these vars persistently whenever settings are saved
+      top[FPSTR(_enabled)] = config.enabled;
+      top[FPSTR(_interrupt_pin)] = config.interruptPin;
+      top[FPSTR(_x_acc_bias)] = config.accel_offset[0];
+      top[FPSTR(_y_acc_bias)] = config.accel_offset[1];
+      top[FPSTR(_z_acc_bias)] = config.accel_offset[2];
+      top[FPSTR(_x_gyro_bias)] = config.gyro_offset[0];
+      top[FPSTR(_y_gyro_bias)] = config.gyro_offset[1];
+      top[FPSTR(_z_gyro_bias)] = config.gyro_offset[2];
+    }
+
+    /*
+     * readFromConfig() can be used to read back the custom settings you added with addToConfig().
+     * This is called by WLED when settings are loaded (currently this only happens immediately after boot, or after saving on the Usermod Settings page)
+     *
+     * readFromConfig() is called BEFORE setup(). This means you can use your persistent values in setup() (e.g. pin assignments, buffer sizes),
+     * but also that if you want to write persistent values to a dynamic buffer, you'd need to allocate it here instead of in setup.
+     * If you don't know what that is, don't fret. It most likely doesn't affect your use case :)
+     *
+     * Return true in case the config values returned from Usermod Settings were complete, or false if you'd like WLED to save your defaults to disk (so any missing values are editable in Usermod Settings)
+     *
+     * getJsonValue() returns false if the value is missing, or copies the value into the variable provided and returns true if the value is present
+     * The configComplete variable is true only if the "exampleUsermod" object and all values are present.  If any values are missing, WLED will know to call addToConfig() to save them
+     *
+     * This function is guaranteed to be called on boot, but could also be called every time settings are updated
+     */
+    bool readFromConfig(JsonObject& root)
+    {
+      // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
+      // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
+      auto old_cfg = config;
+
+      JsonObject top = root[FPSTR(_name)];
+
+      bool configComplete = top.isNull();
+      // Ensure default configuration is loaded
+      configComplete &= getJsonValue(top[FPSTR(_enabled)], config.enabled, true);
+      configComplete &= getJsonValue(top[FPSTR(_interrupt_pin)], config.interruptPin, -1);
+      configComplete &= getJsonValue(top[FPSTR(_x_acc_bias)], config.accel_offset[0], 0);
+      configComplete &= getJsonValue(top[FPSTR(_y_acc_bias)], config.accel_offset[1], 0);
+      configComplete &= getJsonValue(top[FPSTR(_z_acc_bias)], config.accel_offset[2], 0);
+      configComplete &= getJsonValue(top[FPSTR(_x_gyro_bias)], config.gyro_offset[0], 0);
+      configComplete &= getJsonValue(top[FPSTR(_y_gyro_bias)], config.gyro_offset[1], 0);
+      configComplete &= getJsonValue(top[FPSTR(_z_gyro_bias)], config.gyro_offset[2], 0);
+
+      DEBUG_PRINT(FPSTR(_name));
+      if (top.isNull()) {
+        DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
+      } else if (!initDone()) {
+        DEBUG_PRINTLN(F(": config loaded."));
+      } else if (memcmp(&config, &old_cfg, sizeof(config)) == 0) {
+        DEBUG_PRINTLN(F(": config unchanged."));
+      } else {
+        DEBUG_PRINTLN(F(": config updated."));
+        // Previously loaded and config changed
+        if (irqBound && ((old_cfg.interruptPin != config.interruptPin) || !config.enabled)) {
+          detachInterrupt(old_cfg.interruptPin);
+          pinManager.deallocatePin(old_cfg.interruptPin, PinOwner::UM_IMU);            
+          irqBound = false;
+        }
+
+        // Just re-init
+        setup();
+      }
+
+      return configComplete;
+    }
+
+    bool getUMData(um_data_t **data)
+    {
+      if (!data || !config.enabled || !dmpReady) return false; // no pointer provided by caller or not enabled -> exit
+      *data = &um_data;
+      return true;
+    }
 
     /*
      * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
@@ -285,3 +430,14 @@ class MPU6050Driver : public Usermod {
     }
 
 };
+
+
+const char MPU6050Driver::_name[] PROGMEM = "MPU6050_IMU";
+const char MPU6050Driver::_enabled[] PROGMEM = "enabled";
+const char MPU6050Driver::_interrupt_pin[] PROGMEM = "interrupt_pin";
+const char MPU6050Driver::_x_acc_bias[] PROGMEM = "x_acc_bias";
+const char MPU6050Driver::_y_acc_bias[] PROGMEM = "y_acc_bias";
+const char MPU6050Driver::_z_acc_bias[] PROGMEM = "z_acc_bias";
+const char MPU6050Driver::_x_gyro_bias[] PROGMEM = "x_gyro_bias";
+const char MPU6050Driver::_y_gyro_bias[] PROGMEM = "y_gyro_bias";
+const char MPU6050Driver::_z_gyro_bias[] PROGMEM = "z_gyro_bias";